Bathroom in a private house: beautiful arrangement, the best design and competent layout (105 photos). Bathroom in a private house - what should it be? (95 design photos) There is no bathroom in a private house

Wooden houses are no longer a rarity in suburban construction. Thanks to the unique structure and environmental safety natural wood, they have much more advantages than their counterparts made of brick or concrete. It is easy to breathe in such houses, they are warm and cozy even in the most severe frosts.

Despite the positive qualities, some are wary of wooden buildings. The main fears are caused by the bathroom in wooden house and the process of setting it up. The excitement is quite justified, because the organic building material intensively absorbs moisture, and this is fraught with decay.

The right approach to planning and finishing the bathroom will help to avoid these problems. We will tell you how best to lay communications and place plumbing in a hygienic room. We will reveal all the subtleties of the waterproofing device and finishing.

First of all, at the design stage, you need to choose the best place for arranging the bathroom. It is advisable to place it on the first floor next to the bedroom, dressing room or between two rooms.

If the living space is large, then for convenience the house may have several bathrooms on different floors. In this case, the premises are equipped one above the other. At the same time, great importance is given to preliminary calculations of the load on floors in wooden houses.

Given that the average weight of a standard bath is about 100 kg. Filled with water, it weighs twice as much. Plus the body weight of the person taking the bath. Because of this, the design load is increased to at least 460 kg / m2.

An increased load will be placed on the floor coverings in the bathroom. They should be much thicker and stronger than standard designs.

To obtain the desired design load parameters, the following measures are taken:

• reduction of the step of laying beams;
• the use of floors with a large cross section;
• increase in the thickness of the beams by 25 percent.

It is more expedient to make the floor in the bathroom somewhat lower than in other rooms. The margin in height will protect the house from flooding in case of unforeseen circumstances occurring due to pipe breaks or equipment breakdowns.

During planning, you need to draw a layout plumbing equipment, risers, fixtures, valves.

Features of the arrangement of the communication system

When appropriate place chosen, it's time to think through all the nuances that accompany the supply of communications to the room. It is advisable to draw up a detailed plan, where to indicate the placement of each individual element.

The subtleties of the organization of the water supply

Condensation is an inveterate enemy of all wooden structures, often formed in large quantities on pipes with cold water. You can protect wood from it in the bathroom by choosing plastic pipes instead of metal products.

Plastic is characterized by lower thermal conductivity, which means that the amount of condensate on it will decrease and will tend to a minimum.

To nullify the risk of rotting wooden structures will help useful advice installation, namely:

• exclusion of contact of pipes with walls;
• thermal insulation of structures with the help of special tubes made of foamed polyurethane;
• fixing the pipeline with clamps equipped with rubber gaskets;
• arrangement of a drain valve that will remove water accumulating on the floor.

Compliance with these simple rules when arranging plumbing in the bathroom will prevent early destruction of load-bearing structures wooden house.

To equip the bathroom plumbing in a wooden house, it is advisable to buy plastic pipes. They are resistant to deformation, and this is important, because a house made of timber or logs gives a noticeable shrinkage over time.

Basic requirements for sewerage

Special requirements are put forward for sewerage systems in wooden houses. Any leaks are dangerous for wood, so it is imperative to carefully check the tightness of all connections.

Also, pipes should not be allowed to freeze. Due to natural ventilation in winter, its risk is quite high. An effective option for preventing this phenomenon is instillation sewer pipes into the ground.

Features of the arrangement of the electrical network in the bathroom

To properly conduct the wiring in the bathroom, you need to remember that high humidity does not in the best way affects the wiring. V adverse conditions open contacts quickly oxidize, and in the area of ​​\u200b\u200bthe connections, the resistance and degree of heating increase.

You should not joke with this, the critical temperature often causes fires. It is important to lay the wiring in compliance with all regulatory requirements connecting cables as securely as possible. It is desirable to cover the ends of the cores in the joints with a layer of tin.

Often fires in wooden houses occur due to errors in the installation of electrical wires. Can't save on this

Also, when drawing up, do not forget that the house is wooden. And here you will need increased attention and additional protection of conductors.

The best option would be to use metal pipes in which the wiring will be laid. The use of copper or steel pipes allows you to safely make hidden installation in the bathroom.

Still, do not forget that electrical outlets should be removed from taps and shower heads. And the sockets must be chosen with a special protective cover - moisture resistant with IP44.

Specifics of the ventilation device

For any bathroom, air exchange is important, and in a wooden house, a complete ventilation system should be especially competently organized.

It is important to ensure a full flow of air into the room, leaving a gap under the door. You can also put special grilles at the bottom of the door - they look beautiful and perform their main function of air supply.

For the bathroom of a wooden house, it is important to ensure the timely supply and removal of air. This will extend the life of the main structures

To remove the exhaust air, a ventilation duct is constructed. It can be displayed in the attic of the house or laid under a false ceiling, if one is installed in the bathroom.

For safety reasons, ventilation ducts are equipped with fire dampers, elastic non-combustible materials, and a fan protected from fire. The power of the exhaust fan is selected based on the area of ​​\u200b\u200bthe room.

If, in addition to the bathroom in a wooden house, a sauna or a steam room is provided, then it is also necessary to think over and there. The specifics of steam room ventilation are described in detail in our article.

A reliable ventilation system in the bathroom will instantly take you out of the room wet air

The rules for the construction and design of the hood in a traditional bathroom are given, which we recommend that you familiarize yourself with.

How to properly waterproof?

Before you start finishing, you need to make waterproofing - an effective waterproof barrier for all parts of the room.

The main types of waterproofing materials

When choosing a material for waterproofing, you should focus on the type of finish that will be used in the bathroom.

To protect the wall structure from the harmful effects of moisture, use the following materials:

• Coating. They are able to create a durable waterproof coating. These are mastics and emulsions that are applied to the surface with a roller or brush in three layers with an interval of several days;
• Pasted, sold in rolls or sheets that are glued with an overlap. Seams are also treated with sealant or waterproof putty;
• Impregnation. They are used for the treatment of non-residential rooms due to the presence of various chemical additives in the composition.

Water-repellent properties are ensured by the presence in the materials of special additives that are safe for humans. So, for gluing sheet bituminous or polymer materials take a special adhesive composition from hot or cold mastic

Treatment with materials with water-repellent properties will protect the tree from swelling and decay due to moisture

The procedure for waterproofing in the bathroom

The waterproofing material is applied only to the cleaned surface treated with deep penetrating primers.

In most cases, the floor is insulated with bituminous mastics, then pasted over with a waterproofing film, and on top they make cement-sand screed reinforced with reinforcing mesh and plasticizer. This technology is reliable and relatively inexpensive.

Cement screed smoothes and levels the surface of the floor, preparing it for finishing

For waterproofing walls, you can use one of the options:

• Treat the surface with a layer of latex or acrylic waterproofing under drywall;
• Coat the walls with mastic before laying the tiles;
• Leave the wooden surface as a finish, impregnating it with compositions with oil and varnish bases.

The surface of the ceiling must also be well lubricated. bituminous mastic in 2-3 layers, and then treat with an antiseptic protective mixture.

When waterproofing coatings, special attention should be paid to the so-called "wet" areas near the sinks and the bath itself.

With the rules for waterproofing a standard bathroom before tiling, which we advise you to read.

Wall, floor and ceiling decoration

After the reliable waterproofing is ready and completely dry, the turn comes finishing works. When choosing materials, you should take into account the features of the room, which is located in a wooden house.

What floor to make in the bathroom?

The basis for finishing the floor will be concrete screed poured over the waterproofing layer. It should have a slight slope, thanks to which an emergency drain is equipped in the floor.

All materials purchased for finishing the bathroom must meet the main requirement for any finishing material for a wooden house - moisture resistance. This is the first thing you need to pay attention to when buying

For finishing the floor most often used:

• laminate;
• porcelain stoneware/ceramic tiles;
• linoleum;
• moisture resistant wood.

An elementary and far from the worst cladding option is ceramic tile. The wooden floor looks beautiful and organic in the bathroom. If you want to save money, you can get by with linoleum.

The laying of hard types of coatings on the floor in wooden houses is carried out according to a floating pattern. That is, they are not fixed rigidly to the base and between the walls of the building and the screed, together with the tiles laid on it, for example, leave a gap of 1.5 - 2 cm.

It is necessary to compensate for the linear movements of wooden structures. From above, the gap is closed with a plinth, which is fixed exclusively on the wall.

Features of wall decoration

When decorating walls, you need to take into account the characteristic features of natural wood. Under the influence of moisture and temperature fluctuations, it shrinks and cracks.

To avoid deformation, the surfaces are prepared for subsequent finishing by installing a crate and fixing a false wall on top. This structure is erected from moisture-resistant drywall or a sliding frame made of a metal profile in compliance with ventilation gap.

Such preparation will allow you to perform almost any type of finishing. But if it is planned to use wood for cladding, then there is no need to build false structures.

Bathroom tiles can be combined with wood or special paint to create beautiful combinations.

Now the following finishing materials for walls in the bathroom are in demand:

• Wooden lining. Sanded and further processed paintwork materials. It is better that it be made of moisture-resistant teak or larch;
• Tile. It is presented in a huge assortment: smooth and embossed, plain, with an ornament, large or mosaic. She is fastened waterproof glue, and the seams are treated with polyurethane elastic sealant;
• Wall panels. It can be plastic plates or aquapanels. Under them, a crate for a ventilation gap must be installed.

A variety of materials for finishing allows you to realize any design fantasy. You can combine several types of materials, create color compositions, play with textures.

Tiling is the perfect solution for bathrooms. It is durable, water resistant and easy to care for.

The subtleties of the arrangement of the ceiling

The ceilings of bathrooms located in private wooden houses are usually finished with suspended or tension structures from glossy PVC panels, moisture-resistant drywall.

Suspended ceilings are valued for numerous benefits. They are a powerful shield against humid air, under them it is easy to disguise elements of the electrical and ventilation systems.

If the choice fell on drywall, then the profile for it should be treated with zinc and coated with additional corrosion protection. In order for the plasterboard ceiling to retain its original attractiveness longer, it is pasted over with glass wallpaper.

Stretch, suspended and rack ceiling structures will allow you to realize any ideas for lighting.

Purchase option cast iron bath it is better to discard immediately. It is unacceptable for a wooden house because of its impressive mass. More practical steel products which are suitable for small spaces.

For rooms decorated in eco-style, it makes sense to purchase an unusual wooden bath. Acrylic models differ in the greatest variety of configurations. Among them, there will definitely be something that fits perfectly into a certain style of interior.

If the size of the room allows, you can install the bath in the center. For a wooden house, such a layout is very convenient and practical. The walls in this case do not come into contact with water, which significantly extends the life of their finishes.

In combined bathrooms, it is desirable to separate the bath and toilet with partitions made of drywall, wood, colored, frosted or mirror glass. Also in the room there should be conditional areas for swimming, recreation, a sanitary zone.

Plumbing must be installed so that there is free space around it:

• bath - 100 cm;
• toilet bowl - 60-70 cm;
• bedside table with opening doors - 50 cm;
• shower cabin - 90 cm;
• sink - 70 cm.

The distance between each type of equipment should be at least 20 cm. This will allow you to use each device without problems without clinging sideways to the other.

Choosing plumbing for small rooms should be very careful. In order not to narrow the space even more visually, you can not install a toilet, sink and bath in dark colors. Profitable solution pastel shades, transparent shelves, built-in furniture will be introduced into the interior.

Conclusions and useful video on the topic

Video about finishing the bathroom with PVC panels:

How to prepare the floor for finishing: effective methods waterproofing:

Laying tiles in the bathroom - all the nuances in the video:

Arranging a bathroom in a wooden house seems to be a difficult and impossible task only at first glance. In fact, anyone can deal with all the subtleties. The main thing is to take into account the characteristic features of natural wood and select high-quality moisture-resistant materials for decoration.

Tell us about how you equipped the bathroom in a house made of timber or logs. Share the nuances and subtleties of the process that may be useful to site visitors. Please leave comments in the block below, ask questions, publish photos on the topic of the article.

Out-of-town construction is gaining more and more popularity. A huge advantage of a private house is the ability to equip it to your liking. Plan the size of the premises and their number yourself, create projects for rooms and bathrooms. When arranging a bathroom, for starters, they determine what will be in it; shower or bath, washbasin, compact, Appliances and furniture. Additionally, devices are installed before heating water, etc.

Bathroom arrangement

The bathroom should be not only multifunctional, but also comfortable, cozy and beautiful. It is rather difficult to choose a universal design project, but general rules and characteristics still exist. They apply to the arrangement of sewerage, electricians and plumbing.

Sewerage

By general rules construction, a bathroom in a private house is designed not from the plumbing, design and location in the house, but from the construction of a sewerage system. If one is already present, it is necessary to drain and connect according to the existing project.

To equip a sewer from scratch with your own hands, follow the rules:

1. 1. Regardless of how many plumbing fixtures and equipment will be connected to the sewer, it is taken out to the street, where a storage tank or septic tank is equipped.
2. 2. When laying pipes, be sure to avoid right angles - if there is a blockage, you will have to disassemble the sewer. If the site plan requires such angles, use a 45° fitting or 3 30° fittings.
3. 3. If the pipeline section is more than 6 m, a revision is installed. A fitting is cut into the house, a manhole is equipped on the street.
4. 4. On uneven terrain, a certain slope is observed. If it is not observed, solid precipitation will not be washed off the walls of the pipes, clogging both the pipes themselves and the water flowing through them.
5. 5. When installing appliances in the form of a dishwasher and washing machines perform forced flow, laying an additional counterslope during construction.
6. 6. When installing a septic tank, it is waterproofed. Tar is the most suitable and cheapest material for this.
7. 7. Residents in the northern regions are recommended to additionally insulate pipes. For this, mineral (basalt) wool in cylinders and polystyrene are used. A more expensive material is extruded polystyrene foam.

A septic tank is a potentially hazardous facility for environment. It is installed at a remote distance from residential facilities and outbuildings (including neighboring ones).

Pipes are laid in a trench according to the instructions:

• the bottom is covered with sand;
• put waterproofing and heat-insulating materials;
• lay pipes;
• covered with sand for 1 m;
• water the sand with water to shrink;
• after 30 minutes, top up with soil.

Water pipes

When equipping a water intake, it is important to choose the right submersible pump for a well. The power of the unit depends on the consumption of water in the family. Additionally, a pumping station with a reserve tank, automation and a metering sensor is installed. Equip such a room in a utility building or utility room in the house.

When installing the pump, an extension is required electric cable. For splicing elements, a terminal box with 4 inputs / outputs is used. If the connection is carried out in a street trench, it is additionally insulated with heat shrink. When connecting the pump to the distribution unit, it is optimal to use a hose with a diameter of 32 mm.

The reserve tank requires special attention. If he has large capacity, then the number of engine on / off will be less, and its service life will increase. For domestic use of water for a family of 4, a volume of 100 liters is sufficient.

When choosing pipes, it is important to remember that they are ordinary (for cold water), reinforced and universal (reinforced with PN-20 marking). The latter is safely hidden under drywall and plaster.

You can improve the design of the bathroom by hiding communications in strobes. In order for the pipes to hold securely, they are reinforced with perforated tape hangers.

Electrician

A bathroom in a private house is good because only the owner himself determines its dimensions, and, accordingly, the number of electrical appliances (overhead, ceiling, wall, built-in). Some electrical components require additional conditions:

1. 1. When installing an electric boiler in the bathroom, its connection is made with a separate copper wire with a cross section of 2-2.5 squares. The same item is used for the automatic washing machine.
2. 2. Embedded ceiling lights additional bathroom height required - dropped ceilings with a depth of about 10 cm will accommodate the cartridge.
3. 3. All powerful appliances protect circuit breakers, they will protect the electrician from overloads and short circuits.
4. 4. Sockets in the bathroom must be equipped with protective covers.

Features of a bathroom in a wooden house

Modern materials and technologies used make it possible to equip a full-fledged bathroom in an ordinary wooden house. It is important to consider some nuances:

• high humidity;
• temperature difference;
• the possibility of splashing water on the floor;
• the severity of plumbing and additional equipment.

It is better to equip a full-fledged bathroom with a shower cabin, a bathtub, a sink, a toilet bowl, appliances and furniture on the first floor. In the room on the top floor, it is reasonable to arrange a separate shower room, a separate toilet room.

All construction work, installation of plumbing and furniture is divided into stages and performed sequentially.

Bathroom projects, interior style features

The master bath is pretty large room. A separate shower room, toilet or guest bathroom occupy a small area. Depending on this, the design will be different. It is this room that reflects the character and preferences of its owners to a greater extent. When creating a project, they take into account the versatility and convenience, but also the style features of the design.

Classical

This interior will never go out of style. Finishing is done in budget option using inexpensive materials, and richer - marble, expensive woods, etc. Common elements of classic design will be:

• pastel, calm shades;
• whimsical, unusual bath legs;
• lamps in the form of candlesticks;
• cranes and decorative details under "bronze".

Modern

This room is equipped with the latest technologies and innovations. The style is suitable for small spaces. Color combinations contrasting, used decorative partitions for zoning individual parts of the room. Plumbing is located as conveniently as possible, filling all corners. The furniture is inexpensive and practical, the equipment is the most modern. Used in lighting LED lamp, decorative elements- non-standard shapes and sizes.

Ethnic

The style is collective, with a pronounced nationality. They use traditional for the ethnic groups of Africa, India, Eastern countries shades of color and materials. Particular emphasis is placed on accessories and plumbing. The room is set patterned floor vases, figurines, walls are painted with symbols or hieroglyphs. The floors are lined with natural (or artificial) stone, shell rock, slate, etc.

If the Provence style is chosen, it is characterized by some wear of the finishes and elements. Oriental lovers should take care of the installation of arches, the presence of national decorations, low furniture and bright textiles.

High tech

On the one hand, this style seems impractical, uncomfortable, on the other hand, automation and relaxation on highest level. This is a combination of tranquility and clarity of lines, the absence of accessories and the maximum efficiency of all bathroom items.

There is no pomposity and deliberate luxury in the design, no floral and plant motifs. Glossy stretch ceilings and walls, mirror doors cabinets, the main materials are glass and metal. Particular attention is paid to lighting - mirrors and plumbing are illuminated, with the help of spotlights zoning separate places of the room.

Unusual elements in the interior of the bathroom

V individual projects bathrooms can be mixed various styles or focusing on unusual elements. This can be the combination of water and fire, the actual bath and fireplace in one room. This can only be done if there is enough space. In order not to complicate the task, the fireplace is installed either gas or electric.

In a private house, in the bathroom, it is quite possible to make a panoramic window (if the windows of the neighbors do not “look into it”). Traditional transparent glasses let in a large amount of sunlight and allow you to enjoy the beauty of nature. But if there is not the most inspiring landscape outside the window, outbuildings or a neighboring house nearby, the transparent glass is replaced with frosted, tinted or stained glass.

A bathroom in a private house can become the most cozy room. You can create such a place to relax even without having big money and the ability to purchase expensive materials. It is important to decide on the style direction, choose plumbing, equip communications and be creative in your work.

The main difference between a bathroom in a high-rise building and a private house is, of course, the layout.

Therefore, it is not surprising that a do-it-yourself bathroom in a private house will turn out to be much more interesting, and the owners themselves will be able to get much more from the premises than urban residents. Let's see what kind of private housing, requiring the arrangement of a full bathroom, we can talk about.

First, it's:

1. Houses old building(not younger than 40 years old), who initially did not have a separate bathroom;
2. houses whose age ranges from 30 to 10 years;
3. modern houses (cottages, townhouses).

Secondly, let's clarify which rooms are intended for the location of the bathroom in the houses we have indicated:

1. in houses of old construction it is:

• • pantries;
  • part of the corridor or kitchen;
  • veranda;
  • places under the stairs to the second floor
  • attic room;

1. in younger houses

• • place on ground floor, including built-in garage;
  • expandable bathroom by connecting adjacent rooms (corridor, hallway, veranda);
  • overhaul of an existing bathroom;
  • second floor and attic;

1. in modern houses:

1. • creation comfortable conditions in a separate bathroom;
   • transfer of the bathroom to another room.

Thirdly, you need to understand what materials the house is made of, because the use of this or that technology depends on it:

1. brick;
2. tree;
3. combination various materials(foam block + brick, wood + brick, shell rock + concrete, steel + concrete, etc.).

For private houses, it is not the secrecy of communications that is more important, but reliable protection from freezing. Therefore, pay more attention to insulation and protective devices for water supply lines.

These are just a few of the factors to be aware of before planning a bathroom in a private home. As can be seen from the list, in most cases we are talking about initially unsuitable places where a do-it-yourself bathroom will be created in a private house.

What to focus on

In addition to the work on functional arrangement bathroom, owners will need to side events, connected with:

• arrangement of water supply and sewerage;
• equipment;
• carrying out waterproofing works;
• decorative flooring, walls and.

Warning!

Many city dwellers, having experience in renovations in urban apartments, mistakenly believe that a bathroom in a private house will be just as predictable in terms of construction operations.

But this is fundamentally wrong, since the sanitary facilities of the apartments are fully adapted to the connection of utilities, unlike individual houses.

Let's find out what is needed for a full-fledged bathroom in terms of building codes:

1. availability of hot and cold water sources in the bathroom;
2. equipping the premises with a water drainage system (sewer drain);
3. Availability ;
4. lighting fixtures;
5. availability of comfortable plumbing.

As you can see, in comparison with city apartments, private houses are the least consistent with the primary requirements, which means that all these worries about arranging the premises fall entirely on the shoulders of their owners.

Of course, if a bathroom is being renovated in a private house, then the issues of water supply and sewer drain already resolved. In such a situation, it is more important to audit technical condition engineering networks, and pay more attention to redevelopment or installation new plumbing, as well as wall and ceiling decoration in accordance with the tastes of the owners.

Development of new places in a private house

We welcome modern approach regarding the fact that in a private house the bathroom can be anywhere. A the best place for her, the neighborhood with the master bedroom is considered.

If it is located on the 1st floor, then the bathroom should be here, if on the second, then all communications should be laid on the 2nd floor.

Bathroom with windows on the first floor

Making the decision to furnish a bathroom is a bold step, but not yet an action. The fact that your bathroom in a private house will be different from its counterparts in a city skyscraper is very cool, but a lot of patience should be applied to this when carrying out repair and construction work.

Moreover, all the shortcomings of open communications in a private house can easily be turned into advantages. For example, room equipment exhaust ventilation it is not necessary to carry out terrible-looking corrugated ventilation ducts. Today there are many elegant solutions, one of which is presented below in the photo.

Or pipes for supplying cold and hot water - why hide them in the walls when you can make them part of the design. The result will be a minimum of work associated with chasing channels in the walls, which will significantly speed up the arrangement of the bathroom.

Laying in an open area copper pipes to the washbasin and bathtub, you will get a unique design.

If you do not like to contemplate pipes, fittings and any other plumbing fittings, then it is easy to build a portal under the bathroom, inside which all engineering communications will be hidden. Do the same with ventilation. plasterboard ceiling will also hide the air ducts.

Let's summarize.

Bathroom in your own home is:

1. unique layout;
2. higher functionality;
3. displaying the virtues of open communications;
4. the possibility of creating closed portals, catwalks, etc.

Gallery

You should not think that the owners of private houses are deprived of all the benefits that apartment owners are provided with. On the contrary, in private houses there is more space and opportunities for the implementation of ideas. It is only worth remembering the nuances when building a bathroom in a private house. These include the selection and installation of communication and ventilation systems. Let's find out what should be the design of a bathroom in a private house.

In this design, finishing materials and color scheme are very well chosen.

In a white bathroom, you can put a black bathtub and add some wood to the interior.

Ceramic tiles with a flower pattern look very beautiful in the design of the bathroom

If you are going to make repairs by adding a bathroom to a private house, you need to take care of the layout. Choose the quantity and appearance of plumbing fixtures and furniture that you are going to install. Private houses are most often built for large families, so you need to decide on the number of bathrooms. If you have two-storey house, it is advisable to install them under each other.

In the bathroom, you can combine large ceramic tiles and mosaic tiles.

Before furnishing a bathroom, study the advice of interior design experts:

when installing the sink, make sure that there is 20 centimeters of free space on the sides for comfortable use;

in front of the toilet bowl at least 60 centimeters of free space, on the sides - 40 cm;

the sink is installed at a height of approximately 80 cm, the main factor is the parameter of the people living in the house;

to the sink you need a section of free space measuring 70 centimeters;

in front of the bath (shower) a distance of 70 centimeters is set.

These recommendations will help not only save space and make the room comfortable, but also visually increase the space even in small houses. If you do not keep the distance, even in a large private house, the bathroom will look small and uncomfortable.

In the bathroom, you can combine completely different colors

A white bathroom with wood elements will be especially beautiful.

Wall decoration in the bathroom is made of chocolate-colored ceramic tiles

Bathroom communication in a private house

One of milestones- arrangement of sewerage and water supply systems. If you are missing centralized water supply, it is necessary to purchase a pumping station, which is installed in a well-heated room. It must be located above the floor level, and to minimize vibration, it must be fixed on a flat area of ​​concrete.

Sewerage is another issue that cannot be passed by. Recently, the cumulative skeptic has become popular, which is an environmentally friendly option, while its low cost. The owner of the house can lay sewer pipes without the help of specialists.

Also an important element is the ventilation system, which removes moist air from the room. If not installed this system, creates a favorable zone for the formation of mold.

Wood can be used in the bathroom

Wall decoration in the bathroom is made of ceramic tiles

Finishing work

Finishing is an important component of comfort in any room, especially in the bathroom, due to temperature changes and high humidity. At the same time, it is necessary to pay attention to the resistance of materials to household chemicals and the ease of cleaning materials. You should not choose cheap and low-quality options, because of the nature of the bathroom, they will not last long, you will have to re-spend cash. Private houses have a huge advantage over apartments - bathrooms are usually much more spacious, which allows you to experiment with design.

Very Beautiful design bathroom with wood

The design of the bathroom is made in a modern style using wood.

Bathroom design in Provence style

How to decorate the walls?

Ceramic tiles are often used to decorate walls. A huge number of different shapes and sizes enable the owner to design rooms, embodying the most unusual ideas. The best solution for wall decoration is tiles: small options can significantly expand the space, large ones are used for spacious bathrooms.

Decorating a wall is incredibly fun: you can lay out a mosaic to create an incredible picture, combine materials of different sizes and colors, creating a unique style. A great solution for spacious bathrooms would be wood trim. The wood looks incredibly beautiful and is additionally varnished, which allows for high moisture resistance.

Soft walls in the bathroom will make it very unusual

The design of the bathroom is made in one color scheme.

Finishing materials for the ceiling

Manufacturers have made sure that the owners of private houses have a wide choice in finishing ceilings. There are an incredible variety of options, the most common and versatile is the stretch ceiling. Its advantages over other options: able to withstand both low and high temperature, moisture resistant and easy to clean. Buyers have an unlimited choice, everything appears on sale every year more species stretch ceilings depending on the style of the bathroom and its dimensions.

In such a bathroom you will get double pleasure.

Wall decoration in the bathroom is made of ceramic tiles

To choose the right color for the bathroom, you can use the color wheel

Floor

When choosing finishing materials for the floor in the bathroom, pay attention to the level of resistance to moisture. The best solution- ceramic tiles, which are much thicker than wall tiles and have a smooth surface. It is necessary to choose models that can withstand high loads, while with anti-slip properties. The marble floor looks beautiful, but it needs a spacious bathroom.

What style to decorate the room?

It is necessary to determine the style long before the construction stage. The table of design options will help you with this.

You need to choose a style solely from your desires and preferences. Mixing elements from different styles is encouraged to create a unique design.

Contemporary bathroom design with wood

The walls and floor in the bathroom are made of ceramic tiles, and the ceiling is made of wood.

Should you use wallpaper in the bathroom?

Most people are afraid to use wallpaper in the bathroom, which is explained by the main disadvantage - paper base quickly absorbs water vapor. Over time, the material begins to swell, which leads to peeling off the wallpaper. Due to temperature changes, the glue begins to lose its properties, so many are afraid to glue wallpaper in the bathroom.

It is worth paying attention to the advantages that overlap the disadvantages:

wallpapering will cost much less than using tiles;

unlike finishing with plastic panels, wallpaper can be glued on your own without involving specialists;

the material is easy to update, in case it starts to move away, and a complete design update will take a minimum of time and effort.

The main difference between all materials available on the market is the technology by which the production takes place. Best for living room or bedroom paper options, but they are not suitable for the bathroom, because there is too much moisture. Washable wallpapers are gaining popularity, which are easy to clean from dirt, and protective covering increases their service life, protecting from delamination from high humidity.

The design of the bathroom is designed in the same style

The bathroom walls are finished with ceramic tiles and decorative plaster.

The design of the bathroom is made in a modern style with wood elements and illuminated shower cubicle.

There are the following types of wallpapers.

Liquids are only conventionally called wallpaper, because this is a mixture that must be diluted with water and applied to the wall after priming. Advantages - easy application, no leveling of walls required, ease of repairing damage. Remember that before applying it is imperative to treat the walls with a primer white color, and such wallpaper should dry for at least two days.

The non-woven type is made on a basis that looks like paper, while it is made from natural mixtures. Such wallpapers are easy to glue, you can choose any color and they are environmentally friendly (especially important if there are children in the house). It is easy to find plain and non-woven wallpapers on sale.

Glass fiber - relatively new version on the Russian market. They are made from fiberglass. Compared with other options, cullet has high strength, environmentally friendly, dirt can be washed off using detergents. This explains their popularity in bathroom design.

Wallpaper is indeed one of the cheapest options for finishing, but not always. The latter option requires huge expenses for the wallpapering process: first, the walls need to be leveled, wallpaper, the prices of which have been rising lately, and buy a lot of paint, because you need to paint with a thick layer of paint.

In a white bathroom, you can make some places black

Wall decoration in the bathroom is made of ceramic tiles

The choice of decor for the interior of the bathroom

Decor is everyone's choice, there are no rules. Some love minimalism, others love baroque splendor. Some people like classic decor more, while others are delighted non-standard combination styles. It's easy to find hundreds of bathroom décor ideas and photos, all unique and special in their own way. But there are some decor items that are definitely worth using in bathroom design.

The interior can be made saturated by playing in contrast. For example, use lights and mirrors in a different style than the walls. You will immediately notice how bright the room looks. If there is enough space, it is worth buying a massive stone countertop, on which perfume and shampoo bottles will look original. It is worth using flowers, because they bring freshness and make any room cozy. You can buy artificial bouquets, but the best option are living plants. Large vase with fresh flowers can be placed on the floor.

Definitely a bathroom in a private house is much more interesting to create. It requires additional time and money, but the field for creativity is greater in comparison with an apartment. Use all the tips and create a unique bathroom interior design in a private house.

A bathroom in a private house is practically no different from the same room in apartments. multi-storey buildings. At the same time, in the conditions of your home, you can plan a bathroom so that it meets all your requirements.

Owners of their own houses have the opportunity to build a room for receiving water procedures, based on their financial capabilities and personal wishes. The owners of apartments in high-rise buildings, where the geometric dimensions of bathrooms are strictly standardized, do not have such a chance. If you are building a house from scratch, the bathroom in it can be located anywhere in the home, allocating as many square meters to it as you like.

If it is planned to enter an already operated residential building, it is recommended to place a bathroom in it in strictly designated places:

• In houses aged 15–30 years - in the built-in car garage either on the basement level, in the attic or on the second floor, in the place where the bathroom was designed by the builders.
• In buildings over 30 years old - in the corridor, next to the kitchen, on a closed veranda, attic, on a free area, "hidden" between floors under the stairs.

Placement of a bathroom in a private building

You can build a room for receiving water procedures from almost any material, from concrete and foam blocks to wood and brick. The main thing here is to plan the bathroom correctly and rationally, making it impeccably comfortable to use. This is easy to achieve if you follow the following tips from professionals:

• be sure to equip the bathroom in a private dwelling with reliable sources of hot and cold water supply, effective ventilation system and sewer drain;
• carry out high-quality insulation of the bathroom;
• equip the bathroom with lighting sources and modern ergonomic sanitary ware;
• leave at least 80–100 cm of free space in front of the font or shower stall;
• mount the sink in the bathroom at a height of about 80 cm;
• properly arrange the floor in the bathroom and insulate it;
• finish the room with special materials that have good resistance to temperature extremes and high humidity.

Country private houses are rarely connected to centralized water supply and wastewater disposal systems. For this reason, worries about the arrangement of water supply and sewerage fall entirely on the shoulders of the owner of the dwelling.

Water supply can be established from a well or a well available in a suburban area. There shouldn't be any particular problems. Now there are many options pumping stations– compact mechanisms operating in automatic mode. You need to pick up such a device, install it once and no longer worry about the lack of water in the bathroom. The pump itself will pump out water, and then supply it to the house. The problem with water heating is also simply solved.

Install an electric water heater or gas boiler. It is even better to spend money and purchase a dual-circuit heating unit. It will provide you with hot water supply, and heat your home to a comfortable temperature even in the most severe winters.

Dual heating unit

The next step is the construction of an autonomous drainage system Wastewater. There are two standard options here. You can equip on your land plot usual drain hole or spend money on the construction of an effective septic tank that will filter drains. without problems built by hand. Moreover, you will not spend much time on this event.

Be sure to take care of the arrangement of high-quality suburban housing. Without it, there will be constant dampness in the room, which, in the end, will lead to the formation of mold and mildew. Ventilation is forced and natural. The cost of their arrangement is different.

Making natural ventilation with your own hands is as easy as shelling pears. It is enough for you to punch a hole under the ceiling of the bathroom (the cross section of such a “hole” is within 9–14 cm). Through it, the moisture-saturated air will exit the room to the outside. Another hole is punched nearby. Needed for a fence. fresh air. It is desirable to mount a special diffuser on the second hole, which will regulate the volume of air entering the bathroom.

Similarly, forced ventilation can be done. But in this case, you will have to additionally purchase an exhaust fan. This increases the cost of creating a ventilation system. It is better to entrust the installation of the exhaust unit to specialists. They will tell you which fan is suitable for your home, as well as quickly and efficiently mount everything. necessary equipment.

Modern thermal insulation products allow you to achieve the ideal microclimate in the room for water procedures. You can insulate the bathroom with the following materials:

1. Mineral wool. A proven thermal insulator that prevents the risk of condensation on the ceiling and walls of the bathroom. Mineral wool is hygroscopic. Therefore, it must be protected from moisture by a vapor and waterproofing layer. Specialists advise using cotton wool in the form of mats (plates). Such products have high rigidity, and most importantly, they are much easier to assemble with your own hands than cheaper mineral wool in rolls. Note! Areas where the cotton mats will come into contact with heating equipment, needs to be screened. For these purposes, aluminum foil is most often used.
2. Cork thermal insulator. With it, any home craftsman can insulate the bathroom. Cork products are simply glued to the ceiling and wall surfaces. Important nuance. Thermal protection of bathrooms is possible with cork products treated with a special wax-based impregnation. It increases the water-repellent characteristics of the thermal insulator.
3. Styrofoam sheets. Inexpensive and affordable material. It makes it possible to insulate rooms for water procedures in a private house with minimal cost financial resources. True, its installation is quite laborious and requires special care from the performer. To insulate the walls and ceiling with foam sheets, you will need to carefully prepare the surfaces (clean them, make them as smooth as possible, prime them). Another difficulty is the fragility of the material. With any negligence, the foam breaks. So get ready for the hard work.

Modern thermal insulation products

You can also insulate the bathroom with the most modern thermal protector - liquid polyurethane foam. It is characterized by high moisture and fire resistance, sound and heat insulation, excellent vapor permeability and strength. Polyurethane foam is sprayed using special equipment.

The floor covering in rooms with high humidity should be as moisture resistant as possible and really solid. Most often, the floor in the bathroom is made of ceramic tiles. Moreover, in this case, special ceramics with a rough surface and a large thickness are used.

The tiled floor is able to withstand severe mechanical stress, it has an anti-slip effect, which is very important. Yes, and the appearance of such a coating can be safely called ideal. Modern technologies make it possible to equip even a wooden floor in the bathroom. Although such a coating is still used quite rarely. But the elegant and beautiful floor made of artificial or natural granite and marble can be seen in many country cottages and private houses.

Tiled floor in the bathroom

Also, the finishing of floor bases is made with such materials:

• laminate;
• parquet board;
• linoleum;
• glass and mosaic elements;
• porcelain tile.

The floor in the bathroom needs proper insulation. Its thermal protection is carried out by polystyrene foam and polyurethane foam materials. Styrofoam and other traditional heat insulators, which we talked about above, are not used. Expanded polystyrene has high thermal insulation properties and sufficient rigidity. But it must be mounted in a thick layer (5-8 cm), which is irrational and economically unprofitable. But the polyurethane foam insulation is laid on the floor with a layer of no more than 2 cm. At the same time, it performs the function of a membrane with steam-conducting capabilities.

An excellent, but objectively expensive solution is to insulate bathrooms with a warm floor system. It is characterized by a high heating potential due to the relatively large heating area. Thanks to this, the room is heated without the need to create elevated temperatures.

You can decorate the bathing rooms in a private house in different ways. Give vent to your imagination. Make it out of a regular bathroom luxury room, where you can relieve the tension accumulated during the day, relax and feel the beauty of our fleeting life.

Decorating a bathing room in a private house

Pay special attention to the choice color palette equipped premises. Orange, yellow, peach and silver shades can energize you. But copper, golden and pale green colors have a calming effect on the human nervous system. Last tip. Decoration Materials To create a unique bathroom design, you need to choose wisely. Purchase products that are not afraid of chemically active compounds and reagents, high humidity and temperature. And then the bathroom will delight you with its beauty and functionality for a long time.