How to build a summer kitchen: tips and solutions. Summer kitchen in the country

At the dacha, you just need a room where in warm time year you could cook dinner or do a preservation for the winter. And even if there is big house, every hostess just dreams about summer option kitchen closed type.
But how to inexpensively make such a structure with their own hands, users will find out by reading this article.

Features and types of buildings

Closed summer cuisine- This is a full-fledged detached building with running water and electricity. Perfect place for welcoming guests in the warm season, family dinners and friendly get-togethers in the evenings. This is the right solution for regions with rainy summers and early frosts. However, use such a construction in winter time not worth it, unless the owners have worried about heating in advance.


Such a kitchen can be an independent structure or an extension to the main house, utility block or bathhouse. It can be equipped with a fireplace, barbecue or oven.

An interesting layout option is a kitchen-house with a terrace or veranda. All the necessary kitchen utensils and equipment are compactly placed inside, and a dining area is formed under the canopy.


In the villages, a variety of structures with a cellar and a barbecue are preferred. But one must take into account the fact that the walls basement will become the top of the kitchen foundation, so they should be made of the most durable material.


It is important to note that if there is no way to conduct electricity on the site, then the right decision would be to purchase a generator that runs on diesel fuel, which will provide light for both the building and kitchen appliances.

The erection of a closed structure is a laborious process that requires accurate calculations and drawings of every detail of the building. Project development with correct application dimensions will speed up construction and help avoid mistakes.

Site selection and structural design

The initial stage in the construction of a summer kitchen at a summer cottage is the choice of location, and then the design of all its components. And so that the result of the work does not disappoint, you need to remember several features.



The best options for building materials

The choice of building materials directly depends not only on the service life, preferences of the owners, but also on financial capabilities. But today there are many practical examples of successful combinations of cheap materials with more expensive ones.

When building a summer building most in demand enjoy:

  • brick;
  • concrete;
  • polycarbonate;
  • natural stone;
  • corrugated board;
  • tree;
  • lining;
  • aluminum.

Do not forget that the summer cottage should emphasize the beauty of the future structure, therefore it will be appropriate to lay out paths made of gravel or tiles, plant flowers and perennial shrubs... And if you have the financial ability to build an artificial pond.


If the site is fenced with a brick fence, it is good to make a kitchen from the same material or using natural stone... Such a structure is not afraid of influence external environment and will stand for a single decade.

It is much easier to make a prefabricated indoor kitchen from a bar. Such a project will be less costly, but every detail of the building will require constant maintenance and processing. In addition, wood wears out much faster than brick or stone.

To cover the floor, use:

  • laminate;
  • parquet;
  • linoleum;
  • decorative tiles.

The roof can be covered with:

  • corrugated board;
  • soft roof;
  • metal tiles.

The exterior decoration of the building with siding elements will give the kitchen a modern look.

Laying the foundation

Having decided on the place and having formed the design of the structure, it is necessary to proceed with the construction of the foundation of the building.
When planning open version summer kitchen, one could simply make a small depression in the ground over the entire area of ​​the future structure, cover it with sand. Allow time to stand a little, and lay out a layer of brick or boards. But the basis of a closed kitchen should be a durable and solid foundation that requires phased installation.


If the flooring will be made of decorative tiles, work surface it is necessary to pre-grind or perform an even cement screed.

Photo: monolithic foundation ready for building

Construction of walls

If the owners of the summer kitchen plan to use it late autumn at the first frost, you need to take care of strong walls so that the room inside does not freeze through under the influence of low temperatures. Therefore, in such cases, it is better to erect a masonry with a thickness of half or a whole brick.

Photo: process brickwork using laces

Lovers of wooden house structures will assemble the walls much faster. They will be based on a frame made of timber. And as an attachment to the elements, it is better to use metal corners and self-tapping screws. The outer part of the walls can be sheathed with a thin layer of boards.

Interior decoration is carried out using drywall, plastic, lining or plastering.

Installation of roofing

The roof of a closed kitchen should be durable and practical. Therefore, when purchasing materials for its installation, you can opt for:


The shape of the roof depends on the preferences of the owners. A gable roof would be a reliable option.

Photo: construction of a log with a gable roof

If the building will be used in winter, then insulation is recommended mineral wool or other insulating material.

One wing roofing or it is better to make the visor longer to create additional protection for the walls during precipitation, thereby extending the life of the entire building.

Interior decoration and interior design

High-quality interior decoration and well-chosen interior design will create a pleasant atmosphere of home comfort.


Getting started with the arrangement, you should pay attention to such nuances.


When creating a closed summer kitchen, it is necessary to accurately calculate every detail of the structure and correctly combine the selected building materials with general style premises, then the resulting structure will become not only a source of pride, but also a favorite place for the family for many years.

Book a gazebo from professionals

Don't have time to build on your own? Please contact the following organizations.

Construction companies

On the fresh air not only the appetite is stronger, but the food is absorbed much better. In warm weather, you don't want to sit indoors at all. Winter preservation is also easier to do outside. In the article we will tell you how to build a summer kitchen for a summer house with your own hands, demonstrate diagrams, drawings, photo and video instructions.

Choosing a type

All types of summer kitchens can be classified into two categories:

  • open;
  • closed.

Closed kitchens resemble a small house-like structure, which often does not have much insulation. The advantage of such a solution will be protection from insects, best protection from bad weather, as well as from the wind. An open kitchen option on one or more sides can be protected with a fabric, wood or other wall. The advantage of such a solution will be a greater unity with nature. Among the open types of buildings, there are options:

  • With barbecue. In this case, you have the advantage of cooking favourite dish over an open fire. The barbecue will be available in any weather. If you additionally mount the oven, then you can please your friends with pizza.
  • With a gazebo or pergola. It's nice to sit among the greenery. This is exactly the solution in which the entire structure will eventually be shrouded in grapes, ivy or other climbing plants.
  • Carport adjacent to the house. The easiest way to build. Requires the least investment. But there is a negative point. When cooking, all steam and smoke will go towards the house. This can damage walls or other finishing materials.

Preparation stages

After you have chosen one of possible options, it's time to create a small project.

  • Choosing a location. It is good when there is an opportunity to place the kitchen in a cozy garden, where a pleasant atmosphere of tranquility reigns. At this stage, it is necessary to take into account the proximity of the location of various communications. They will definitely be needed. For electrical appliances wiring will be required. When preparing food, you cannot do without water and after that you need to put it somewhere. Do not place the building close to driveways and roads. Then your meal will not be spoiled by unpleasant odors. If there is a toilet on the street, then it is better to leave it as far away as possible.
  • We dwell on the material for construction. If you are planning a closed kitchen, then you can approach it like a frame building, in this case you will need wood. A good option would be a building made of foam blocks or bricks. The open one will most likely be made of wood, or one or two of its walls will be of the material that was listed earlier.
  • We decide on the roof. Will look great outdoors soft tiles, but this is a rather expensive solution, although it cannot be ruled out, because the roof area will be small. A good option would be metal or corrugated board. Perhaps, waiting for your turn, you have sheets of slate or ondulin - they will also work.
  • It is also worth considering in the project what equipment is planned to be purchased for the summer kitchen.

Foundation

A summer kitchen is usually thought of as a lightweight construction. This means that the foundation can immediately protrude and the floor, and, perhaps, pouring is not required at all.

  • First, you need to clear the selected area from all debris and vegetation.
  • A small layer of top soil is removed.
  • One of the corners of the future building is marked with a wooden peg or a metal rod. Next, three more elements are installed. To position them correctly, it is necessary to measure the diagonals for identity. A fishing line or strong twine is pulled between them, which will serve as a guide.

If the building will consist of a canopy, then after these steps you can proceed as follows:

  • The entire perimeter of the marked site is dug to a depth of 30 cm.
  • The bottom is leveled and compacted.
  • Sand is poured inside with a layer of 10‒15 cm. It is also leveled and well rammed.
  • The remaining space is filled with screenings and the final leveling is performed.
  • Next, on our "cake", which has been prepared, paving or other tiles, which are intended for the street, are laid. This can be done on a dry cement mortar, which, after spilling with water, will fix the entire base well.
  • Pits are dug at four corners, their depth should be at least 50 cm. Formwork is installed inside. A crate is made of reinforcement, which will be the basis of a reinforced concrete structure. It fits inside and is filled with solution. With the help of a vibrator, the entire mixture is rammed. While the concrete has not yet hardened, two metal plates are inserted in the middle, to which we can fix wooden poles, which will be the support for the walls and roof.

This option of the base will be relevant in the case when the soil is dense enough. In cases where groundwater may be very close to the surface or displacements of the top layer are noticed, a more solid base must be provided. Also, if you plan to finish building a stove or barbecue on such a foundation, then separate concrete supports will need to be laid for them.

In order to make a foundation slab, we need to take the first three steps from the previous instructions. Next, we take on the following:

  • Cooking 8 pieces of reinforcing rods. Four of them should be 10 cm shorter than one side of the future structure, 4 others 10 cm shorter than the other. If the building is square, then they will all turn out to be the same size.
  • We lay four of them according to the shape of our future structure and fix them to each other. Then, every 40 cm, we tie longitudinal and transverse jumpers. Prepare the second mesh in the same way. We connect the two gratings with jumpers to such a height that the future slab rises above the surface by at least 5 cm.
  • We lower the entire structure into the middle of the dug hole, install the formwork and fill it with concrete. We ram with a vibrator. We level it with slats and let it stand for several weeks.
  • In fresh concrete around the perimeter with a step of a meter, you can place metal plates on the width of the future timber for the walls. Or it can only be done in the corners.

It is very important that the floor is above the ground. Thanks to this, rainwater will not flow. It is also good to make a slight slope of the floor so that rainfall, which will be carried by the wind, can flow freely into the drain or simply through the door.

In the case when it is planned to build a closed kitchen made of brick or foam block, this version of the foundation may be enough. Also, for these needs, you can build a shallow or columnar tape foundation. In this case, such a large-scale excavation is not carried out.

  • A trench is being dug to a depth of 50 cm along the entire perimeter of the future kitchen. The width will depend on the thickness of the walls. In any case, the foundation should be 10‒15 cm wider.
  • A layer of sand is poured onto the bottom, which is leveled and spilled with water.
  • A metal base-lattice is made according to the principle as in the previous instruction. She fits into a trench.
  • Formwork is installed with the expectation that the future foundation rises 20-30 cm above the ground.
  • Fill in cement mortar, ram and align it. Let it stand for 2-3 weeks.

The supply of all communications must be carried out in parallel with the laying of the foundation, so that later you do not have to hammer holes in it or dig under it. To prevent the pipes from being clogged with mortar, they must be closed in advance with a cloth and plastic oilcloth.

Open kitchen

This option can be built most quickly. We have already laid the foundation and support for the supports. If you plan to close the kitchen on one or both sides with walls made of bricks or other material, then the first step is to start building these partitions.

  • At the corners of the future walls we dig metal into the ground square tube or a profile of 50 × 50 mm. We set it up by level. We do this so that the planks are close to the masonry. They will guide us.
  • Pull the fishing line between them. We raise it to the height of the first row of bricks that will be laid. We set it up by level.
  • Cooking cement-sand mortar in a ratio of 1: 3. This will be sufficient for our purposes.
  • We make laying, focusing on the stretched fishing line, and also periodically recheck ourselves with a level.
  • As soon as the first row is completed, raise the line for the next and so on until the very end.
  • In order for the structure to be more stable, a reinforcing mesh can be laid in the seams.

If you do not plan on having walls of this nature, then the process will be much easier.

  • We fasten a beam to the metal plates that we laid during the manufacture of the foundation, which will serve as a support. When the whole structure is of great length, then it is necessary to foresee in advance the need to install 3-4 pillars on one side. Their length should be equal to the height of our building, and the dimensions of the sides should be 15 × 15 cm or 15 × 10 cm.
  • We set them in level so that they are strictly vertical. The beams of one wall must be longer so that we can organize the roof slope.
  • We immediately reinforce our posts with the upper strapping. It can be made from the same logs. We fix it with metal corners.
  • To give more stability to the entire structure, you can install two jibs near each post. They can be fixed to the support with self-tapping screws, and to the base with an anchor bolt.
  • We mount beams for our future roof... In order for them to better hold in the places of their abutment to the harness, it is better to perform cuts. We fix it with metal corners.
  • We make a crate under the flooring, as recommended by the manufacturer. We lay the roofing material.
  • To create more coziness, one side (or more) can be sewn up with wooden lining or a block of house. On the other, make a wooden lattice. You can equip supports for climbing green plants.

In the case when it is planned to build a pergola, after installation ceiling beams nothing else needs to be done. They can be stained or varnished. Further, the plants themselves will do their job, creating a shade, when they fully grow.

Closed kitchen

At the design stage, it may have been decided to erect walls from a foam block or brick, then this can be done according to the principle with the installation of vertical landmarks, which was mentioned above. The walls may not be too thick. In some cases, laying in half a brick is allowed. But always consider the weight of the future roof. In the future, the outside of the building can be sheathed with siding or a block house. For interior decoration a block house, lining or other material that will be resistant to frost is also suitable, because it is unlikely that someone will constantly heat the room on purpose in winter.

A timber is laid on the walls, which will act as a Mauerlat. Its size can be 10 × 15 cm. It is fixed with anchor bolts or studs that need to be bricked up along the walls. Under it, it is imperative to lay waterproofing in the form of roofing material or bikrost. A rafter system is installed on the logs. It can be for both a gable and a pitched roof (for this option, it will be enough to make one wall higher than the other, then beams are simply installed between them). The lathing is mounted on the beams and the roofing is laid. WITH inside the ceiling is hemmed.

You can go easier and stop at frame version... For it, we need beams of the same size as for the vertical columns from the instructions for an open kitchen. We make the foundation out of them. We lay them around the perimeter of our foundation on two layers of roofing material or bikrost, which will serve as waterproofing. We make a bandage between them. To do this, at the edge of each log, there is a depression half the depth and width equal to the width of the log. Checking the diagonals. We fix them together with self-tapping screws and internal metal corners. Next, we fix it to pre-prepared plates or anchors to the foundation.

We mount corner support pillars from the same bar. With a step of 60 cm, we install additional vertical supports from a board measuring 10 × 5 cm.For greater rigidity, we fasten the jibs for each main support. We carry out the top strapping and install the rafter system for the future roof. We do this by analogy with the open kitchen option.

Home stretch

Even if a barbecue or stove is planned in our kitchen, this does not exclude the presence of a gas or electric stove which are much more convenient to use. It is necessary to take care of the installation of the sink, mixer, as well as the support for the dishes on which it will dry. It is good if there is a cabinet in which you can hide cutlery, as well as pots. You need to take care of the dining table as well comfortable furniture where you can relax. For greater comfort, it is better to carry out the main and decorative lighting.

For an open kitchen project, it is best to ensure that everything lighting, preferably with IP68 protection. In this case, you do not have to worry about any elements being damaged by rainwater.

Don't go casual about your summer kitchen project. Let it be, in a sense, a design decision. After all, it will serve not only as a place for eating, but also as a recreation area with family and friends.

For a summer residence, many plan to order or build a summer kitchen with their own hands: this is a very simple design, which makes it possible to relax in the fresh air and at the same time cook food. The facility provides a stay on personal plot with special comfort. It requires the arrangement of a special site using available materials.

Simple or complex kitchen design

If we supplement the idea of ​​a simple summer kitchen, then only after making the appropriate changes to it:

  1. The place in the gazebo, reserved for the kitchen, can be made elongated in order to install a stove in it.
  2. Replace the hexagonal gazebo with an ordinary rectangular building.
  3. Converting the dining room of the summer building.
  4. Replace the canopy with a conventional closed structure.
  5. Leave the area in front of the entrance to the building open.

Such schemes for the construction of simple summer dining buildings are a popular addition to small cottages, which are located near water bodies. It is ideal to use a block of wood to assemble the frame of the structure, its roof and the beams of the glazing frames. Indoor and outdoor floors can be laid out from decking, for the manufacture of which sawdust and a polypropylene binder are used.

Another option for a summer building can be a structure where the kitchen is a frame structure, the walls of which are built of brick and wood, that is, they consist of 2 parts. Back wall can be laid out using red bricks.

The lined wall should be a continuation of the base of the stove and the working space of the kitchen.
At the end of the room, doors are hung from boards of a conventional design, consisting of 2 leaves. On the other hand, you can lay out a fireplace with a chimney and a hood. The front wall can be decorated with a three-section glass unit. The dimensions of the structure are usually 4x3 m, which is quite enough for such a structure.

Your own summer cottage, which is not filled with outbuildings, can be equipped with an additional structure. It can be a summer kitchen made of timber, which is universal design... If the project involves laying a stone stove, then this task is the most difficult. An additional foundation will be required, so it is better to entrust the work to professional craftsmen.

Simple summer building

Summer kitchen projects for suburban area presented in huge numbers on specialized sites. You can choose a glazed room or a room open on all sides with a fireplace and stove. It should be designed in the same style. For example, furniture can be made from materials at hand. Everything is determined by the needs of the family and the state of its budget. It is important not to miscalculate with the installation of the stove and the assembly of the construction of the summer kitchen for the summer cottage with your own hands.

Dignity simple room summer buildings can be realized not only in warm season but also cold. The features of the structure to be equipped should depend on how often it will be used: constantly or exclusively in the summer. Usually on the territory of personal plots there are no separate food blocks with barbecues.

It is hot in summer and there is no particular desire to waste time making food. In this case, arranging a summer kitchen with your own hands should make life easier for many summer residents. Summer kitchen under covered canopy is ideal for personal households. The device of such a structure differs from the usual construction of a building, but the general idea resembles the construction of gazebos or verandas with a stove or barbecue. The elements included in the design of the kitchen are as follows:

  • oven for a summer kitchen with a hood;
  • a canopy over the kitchen and a place for organizing a feast.

The structure has a hard concrete surface, usually a tiled area. This could be wood flooring. A summer kitchen in a private house usually looks like an extension, which allows you to create a structure that is easier to install, which reduces construction costs.

The options for the summer cooking extension may vary. A simple kitchen should be under a canopy or in a gazebo. One load-bearing wall- it the best option such a building that allows you to close the kitchen and feast from any drafts.

Summer kitchen options

You can begin to resolve the issue, having decided on the budget of the future structure and the place for its construction. Previously, you should imagine the future design, draw up its scheme, taking into account your own needs. In most cases, summer kitchens for summer cottages are built in following options:

  1. A simple kitchen design that takes up little space under the canopy.
  2. A platform with a canopy of 10-15 m², with an additional place where you can cook food on the grill or stone brazier.
  3. Closed room equipped with a ventilation and air heating system.

In the first case, the site should be removed from the main building or resting place. Often this type of kitchen design is 3 m². The option involves the installation of a stove, the presence kitchen utensils... The room must be closed from bad weather. It is usually found around outdoor terrace or verandas.

The area of ​​10-15 m² for the kitchen is spacious, providing for the presence of a dining room and a conventional partition, a bar counter and additional rooms. In a summer kitchen with a ventilation system, there may be a basement room for storing food. The correct choice of a place for installing a kitchen may involve the construction of a gazebo, which must be equipped with an oven and refrigerator. Even the most simplest design kitchens with barbecues must have a drain for water drainage, possibly running water.

How to equip a simple kitchen option

Summer kitchen construction is the most successful. If such a project is thought out in advance, then it will not cause various problems during its implementation. The room is a conventional structure that can be erected by hand.

Among the main difficulties that need to be solved in the process of arranging a summer kitchen, there may be the following:

  1. The discrepancy between the choice of a conventional stove and its installation inside the kitchen.
  2. At the same time, it will be necessary to solve the problem of arranging the chimney through the roof covering.

The room itself should be comfortable and warm. It requires excellent ventilation without drafts. It is best to choose the usual angular placement of the building or the installation scheme for the frame with walls and window openings. The room should have a dining area, so the usual setting of the dining table along the countertop might be the best option.

Simple options summer kitchens are suitable for summer cottages small size, but also suitable for mansions. Installed on wood flooring a kitchen structure raised above the ground with a light foundation can be covered with a sectional canopy. This will allow you to take advantage of the available space for safe cooking and rest. For such a room, it is enough to provide a gas-cylinder stove and an exhaust hood. As a result, a minimum of waste and pollution can be achieved when this option is compared with the use of firewood.

The design of the summer kitchen can be placed inside glazed gazebo hexagon shape. The dining room is located under a canopy. The closed design ensures compliance with sanitary and hygienic standards, assumes normal storage of product stocks.

Dinner table and the chairs have been moved under a canopy, which does not interfere with free movement from kitchen to dining room at all. A team of 3 people will be required for the construction of the summer facility. It can be done within 10 working days. The price of an ordinary building is approximately 25 thousand rubles. From conventional options this design is more convenient and comfortable, so summer residents often choose it for their plots.

Preparation of the foundation and construction of the structure

A do-it-yourself summer kitchen can only be built on separate basis... The back wall is laid out half a brick wide from a red sample. A large stove and a worktop can be attached to the back wall.

The initial stage of construction is associated with the arrangement of a conventional shallow foundation, reinforced with a grid from a hot-rolled rod, which has cross section in 10 mm. A tape 55 cm wide under the body is often poured along a contour in the form of the letter P. A foundation is required under the furnace.

Combining stove with fireplace

After pouring the base, columnar supports are mounted vertically, on which a gable-type roof can later be placed. In the far corner of the building, you can place a stove, possibly combined with a fireplace. This simple method allows you to connect the stove and fireplace under a common chimney... The fireplace itself is made in the usual way. The kiln is built using the kiln masonry technology. For laying out the combustion chamber, it is used fireclay brick.

Arrangement of roofing structures

Tie the vertical support pillars using a horizontal bar. The following elements are installed on it:

  • vertical supports;
  • ridge run;
  • rafter system.

Waterproofing is being installed on the rafters and lathing is made of slats for laying the tiles. The roof can be made of profiled sheet or shingles. The floor in the room is laid out of ordinary clinker tiles on a sand base.

For structures with a wood or coal stove, this option is safe if the floor in the building is made of wood. The front wall of the structure is reinforced with a horizontal cross member, and then the entire surface is sewn up with clapboard. After that, you need to insert into it window frame.

Fasteners should be stuffed onto the facade frame and doors with 2 leaves should be hung. The opening comes out wide, which provides access to light and air, especially in the evening. The choice of any option for a summer kitchen must be compared with your own capabilities, if you want to implement the project yourself.

Suitable options are not only modern technologies the construction of gazebos, but also outdated methods. You can equip the roof and floor using inexpensive materials... The duration of the structure's operation depends on the quality of the work on its arrangement.


A simple summer kitchen option for a summer cottage is available for any budget and your skill level.


If desired, the kitchen can be made completely closed, but then you can use only gas and electric ovens, and a barbecue and a wood-fired barbecue can be located next to the kitchen.


A simple summer kitchen with a barbecue and barbecue with your own hands.

This summer kitchen option is only used for cooking over an open fire. It includes a barbecue, work table and a canopy sink. The dining area and barbecue are located on the adjacent area.

For the construction of the summer kitchen, the ground was first leveled, a layer of gravel and sand was laid on it, and the pillars were concreted under the support pillars of the canopy.

At the next stage, we lay the tiles on the prepared site. In the area intended for the barbecue, there will be no tiles, it will be with sand, just decorate the edges of the site with curb tiles. Then we lay out the circular masonry under the brazier with refractory bricks.

We install the canopy: first, the support pillars, then we connect them with floor beams, the roof of the canopy slopes away from the site. We sheathe the frame of the summer kitchen with wooden planks.

We cover the brazier with decorative masonry made of natural stone.

We install a slate roof, sheathe the inside of the summer kitchen with a magnesite slab intended for outdoor use. Installing a work table, sink and barbecue.

Such a summer kitchen can be made by hand in just a couple of days off.

Summer kitchen with a bar.

The design of this summer kitchen included a shed for the summer kitchen itself and a pergola for the dining area. The summer kitchen includes an oven, barbecue and eventually a pizza oven.

Using this kitchen as an example, you can see that a summer kitchen with your own hands can be built in several stages. At the first stage, everything is being built, except for the pizza oven, which so far is only in the plans, but there is no ability to build it and the means to hire a master to build it. It was postponed for the next year.

The order of work is standard - we level the site, concreting the pillars under the supports, laying a gravel-sand cushion on the site, and paving the site.

Because the summer kitchen is located in a quiet corner of the garden, then they decided not to close it on three sides, but to make only the rear blank wall. Simple laying of their cinder blocks forms the work surface. The table top was made of wooden beams.

The very process of building such a kitchen is not very laborious and any summer resident can afford such a summer kitchen project.

A simple summer kitchen near the house with your own hands.

Unlike summer residents, the owners of a private house have a serious plus - they do not need to go anywhere and the construction process can be more calm and measured. The construction of this kitchen began with the paving of this beautiful area in front of the house. natural stone combined with cobblestone. When the site was ready, it was decided that it could also be used for a summer kitchen next to the house.

First, the pillars were concreted under the canopy supports and installed. The entire kitchen will be made of concrete slabs and support platforms will also be concreted under them.

In order to do concrete countertop, made the formwork, covered it with foil, put reinforcement. The places for the sink and barbecue were marked with containers of the corresponding sizes. After the concrete had hardened, the formwork was removed and the edges sanded.

We are erecting a working table for our summer kitchen from concrete blocks, bringing the water inlet to the place intended for the sink.

Our summer kitchen with our own hands is almost ready - a sink is installed, on the right side of the countertop there is a place for a barbecue, in the lower left part there is a place for a barbecue.

Additionally, a storage cabinet was built next to the summer kitchen.

This is where the pillows from the furniture will be stored, which will be in the dining area.

We covered the roof of the summer kitchen with transparent polycarbonate, finished the decorative fence around the kitchen to give the building a more finished look.

Simple and beautiful kitchen do it yourself can really be done inexpensively and easily.

But what a pleasure it is to enjoy your dinner outdoors in the garden!

Do-it-yourself summer kitchen next to the gazebo.

A small shed next to the main gazebo can be turned into a small summer kitchen.

Stylized wooden furniture from scrap materials will add a relaxed atmosphere of comfort to this corner of your garden.

If necessary, you can host a large enough company here - you just need to put up a large table.

So a simple canopy next to the gazebo can turn it into dining area for the summer kitchen.

Summer kitchen with a do-it-yourself stove.

If you know how and love to cook in the oven, it is not necessary to follow the general fashion for barbecues and barbecues. Add an extension to your gazebo, make a stove in it - and you have a wonderful summer kitchen, not like the others.

By the way, grill and barbecue may well find their place in your summer kitchen.

This option is great for areas with cold summers, where while you are standing near the stove it is warm, but when you sit and dine, you want comfort, not refreshing coolness.

You already have a gazebo - it can be used as a dining room on cooler days. And for summer days, you can simply install a table between the house and the gazebo.

For the barbecue itself, an ordinary canopy tied to a gazebo and a small work table next to it for cooking will be enough for you.

So, if you are creative about what you already have, then it is not necessary to build a new free-standing structure for a summer kitchen. By smartly adding small elements, you can significantly increase the functionality of existing buildings.

A simple summer kitchen with your own hands can be built with a very modest budget, you just need to turn on your creativity and it can be built quickly and inexpensively.

If you have approached this process wisely, then you can always expand, complete and improve your summer kitchen.

Do you agree that a simple summer kitchen with our own hands is within the power of each of us?

In many private farmsteads old building you can find a small house, which the owners call the summer kitchen. In winter, it is almost never used, and in the warm season, life is in full swing here. Does it make sense to build it in the yard of a new house?

Though modern houses much more spacious than buildings of the middle of the last century and are often equipped with a powerful climatic technology, summer kitchens have not lost their relevance. This is due to several factors. The main one is the desire to spend as much time as possible outdoors, and not in an air-conditioned room. Affectionate breeze and rustle of foliage are much more pleasant than the monotonous hum of an air conditioner and currents of cold air that threaten to catch a cold.

Abundance of modern building materials and technology allows you to equip a summer kitchen no worse than an all-season kitchen. With electric stoves and gas grills even those dishes that are not available in the main room can be prepared here.

Advantages and disadvantages

Spending a lot of time in the kitchen is a kind of tradition in our country. Here we not only cook and eat, but also receive guests, sit with the whole family all evening long at tea and talking. So why not do it outside during the warm season?

The advantages of such a solution are many:

  • The modern pace of life is such that we spend most of our time indoors. And this is not the most the best way affects health. Evenings in the garden will strengthen it.
  • Cooking outside is a great way to maintain a constant temperature in your home, rarely turning on the air conditioners. The steam from the pots and the heat from the burners will simply blow away the summer breeze. This is especially true for those who harvest canned fruits and vegetables for the winter.
  • All odors remain outside. Agree, the smell of fried fish or cutlets spreading through the house and eating into furniture is not the best flavor.
  • For families with small children, this kitchen is a great way to combine outing with toddlers and cooking. It is enough just to look at the little ones frolicking in the garden, going about their business.

The building has only one drawback - the seasonality of use.

Types: open and closed, examples of successful layouts (photo)

Structurally, all buildings of this type are divided into two types: open and closed. The choice of one of them depends on the planned method of operation, the amount that you are willing to spend on construction, the area of ​​a free site and many other factors.

Open summer kitchens

Such a building looks more like a well-equipped gazebo or terrace.

It is open from 2-4 sides, and is protected from the sun and precipitation by a canopy. The advantages of open summer kitchens include:

  • maximum light and air;
  • low construction price;
  • no need for major design;
  • speed of construction.

But she also has disadvantages:

  • ubiquitous dust that will constantly have to be wiped off surfaces before cooking;
  • insects that will surely flock to the light;
  • neighbor cats who will come at night in search of something tasty, carelessly forgotten on the table;
  • short service life - only in summer.

Closed summer kitchens

Such structures represent a full-fledged house with a foundation, walls, roof, windows and doors.

Most often it is a light, poorly insulated building. The advantages of this type of structure include:

  • long service life - from mid-spring to mid-autumn, especially if a furnace is installed inside;
  • absence of insects and uninvited four-legged guests;
  • the ability to lock the room, which means to leave in it not only food, but also valuable things;
  • in winter, garden furniture can be stored here.

Among the disadvantages:

  • high cost and complexity of construction;
  • a limited amount of light and air - after all, this is a closed building.

With a large glazing area, the room can easily be transformed into open kitchen by simply opening or completely removing the windows (if provided by the project).

Combined summer kitchens

This is a kind of symbiosis of open and closed construction. It provides a small closed part, equipped with a functional area, and a large open seating area with a table, chairs and possibly a barbecue.

The dining area can be open-air, like a patio. Or it can be protected by a canopy or pergola. The playground also looks great, entwined with ivy or other liana on all sides. In such a green gazebo it is fresh and cool even in extreme heat.

This option combines the advantages of open and closed kitchens, while it has practically no disadvantages.

Project options

There are a lot of options for building open and closed summer kitchens. It all depends on the imagination and financial capabilities of the owner.

Most inexpensive option- usual wooden gazebo with firm floor covering... Any available material can be used as a roof. It can be decorated climbing plants... This creates shade, coziness and prevents drafts.

Properly used textiles can achieve the same effect. In addition, the curtains drawn in the evening will protect from prying eyes and insects.

If necessary, you can make the summer kitchen closed on one or more sides. To do this, it is enough to sew up the spans. light material, which does not create a large load on the base - wood or plastic. Often one of the "walls" is formed by the chimney of a grill or oven complex.

One of the most good options in our climatic conditions - the gazebo is closed with large area glazing - French windows... In warm weather, they can be opened, creating a space blown by the breeze, and in cold weather, they can be closed, keeping the warmth inside. Such a building can be used from early spring to late autumn, especially if there is a stove inside.

Where is the best place to place the summer kitchen

When choosing the location of the summer kitchen, several factors must be taken into account:

  • Possibility of supplying communications. To ensure full use in the building, you need to supply water, sewerage and electricity. Gas is not required, it is much easier to install an electric stove or use cylinders.
  • Remoteness of outbuildings. The kitchen should be as far away from outdoor toilet, septic tank, dog enclosure and sheds for livestock and poultry. This will eliminate the possibility of the appearance bad smell in any wind direction.

An open summer kitchen can be adjacent to the house. This greatly facilitates and reduces the cost of construction and laying of communications. And moving between the house and the outbuilding is more pleasant, especially in the rain. It is desirable that there is an adjacent wall without windows. Then smoke, odors and noise will not penetrate into the house.

It is especially comfortable in a space formed inner corner Houses. Then the kitchen has two walls. Its construction requires minimal financial and time costs.

Adjoining only one wall gives you more planning freedom. You can vary the size, furniture arrangement and decoration methods. The main thing is that the kitchen is decorated in the same style as the facade of the house.

A very popular option for placing a closed-type summer kitchen is above the cellar. In this case, his monolithic walls serve as a foundation, which significantly reduces costs. In turn, the building serves as additional insulation. It can be either an inexpensive panel board house or a full-fledged construction from a bar. In the latter case, care must be taken to ensure that the foundation can withstand the weight of the structure.

More interesting options designing and decorating a summer kitchen on video:

DIY summer kitchen: video

It is not difficult to build a simple open or closed summer kitchen. Most often, wood is used for this - beams different section, board, lining. To protect the material from moisture and insects, it must be covered with special formulations... It is also advisable to use fire retardants that reduce the flammability of wood.

Consider an inexpensive and uncomplicated construction option.

  • Laying the foundation. For a light panel building or an open summer kitchen, in most cases, it is enough columnar foundation... Work begins with marking and soil removal. Then a cushion of rubble and sand is filled in, formwork and a reinforcing frame are installed. All this is poured with concrete. After it has completely solidified, you can continue to work.

  • Lower crown. For waterproofing, an insulating material - roofing felt - is laid on each of the pillars. Then going bottom rail of processed protective compound logs. It is attached to the concrete with anchor bolts.
  • Erection of vertical supports and installation of horizontal lintels. All this is also made of wood and is connected with metal corners, dowels or cuttings. The installation of jibs in this design is not necessary, a few horizontal jumpers are enough.

  • Top rail and rafters. On top of the vertical beams, the upper harness is mounted and the rafter system and the roof lathing are assembled. The method of its installation depends on the type of roof chosen.
  • Plumbing and sewerage. It is necessary to bring the main communications to the future structure before arranging the floor. This will hide the pipes and facilitate the installation of the cover. Since the system will only be used in the summer, it is advisable to introduce pipes from below, between the foundation pillars.
  • Floor covering. The most budget-friendly and easy-to-use floor option for such a kitchen is edged board... At correct processing it will last for many years. A rough floor in a summer building is not needed, we immediately lay a finishing one.

  • Installation roofing material... The roofing technology depends on the type of material. It can be laid directly on the battens or on a special backing. It is desirable that these were materials with a small resonating ability - slate, roll roof or ondulin. Then the room will not be too noisy during the rain.

At this stage, the open summer kitchen can be considered ready. All that remains is to finish, install furniture and decor. If the plans include a closed kitchen, construction works need to continue.

  • External cladding. Outside, the structure is sheathed with a board, siding or any other facade material... Preferably the same as the house is decorated, or similar to it.
  • Installation of windows and doors. It makes no sense to put expensive double-glazed windows and doors in a poorly insulated building. Ordinary wooden frames will suffice.
  • From the inside, the walls can be sheathed with clapboard, plastic or moisture resistant plasterboard followed by painting.

After finishing finishing works the room can be used for its intended purpose.

What type and size of kitchen to choose, build it yourself or hire specialists for this - everyone decides for himself. But this building will undoubtedly make the site much more comfortable and will allow you to spend many unique days and evenings. As you can see, you can build a summer kitchen yourself without special skills and significant material costs.