The cost of plastic windows by size. The cost of plastic windows by size Production of PVC window frames to order

Premium German brand on the Russian market since 1995. With us you get real German quality from a company with a 48-year history around the world.

• ALL profile systems top class "A"
• ALL are frost-resistant and marked with the letter "M"
• ALL have maximum 4-sided steel reinforcement
• Uniform quality standard regardless of the country of production

The more air chambers, the less air exchange and, accordingly, the higher the thermal insulation.

The wider the profile and the greater the installation depth, the higher the thermal insulation.

Profiles ONLY top class "A"

According to the thickness of the inner walls, ALL our profiles are upper class"A" - the thickness of their front wall is at least 3 mm.

• class "A": front wall not less than 3.0 mm
• class "B": front wall not less than 2.5 mm
• class "C": wall thickness is not standardized

Please note that 80-90% of the Russian market are "B" and "C" classes and only 10-20% of "A" class profiles. At the same time, in our range of VEKA profiles ONLY class "A".

As a matter of principle, we DO NOT use profile systems of classes "B" and "C" (with a front wall width of less than 3.0 mm).

ONLY frost-resistant profiles

According to GOST 30673-99 "PVC profiles for window and door blocks" in terms of resistance to climatic influences, ALL of our profiles are "frost-resistant" - for areas with AVERAGE monthly air temperature in January BELOW minus 20°С.

GOST standards for different classes:

• normal version "N": average temperature in January - minus 20°C and above
• frost-resistant version "M": the average temperature in January is lower than minus 20°С

In our assortment ONLY frost-resistant profile systems, marked with the letter "M".

Heat transfer resistance (thermal heat resistance) is the main coefficient of thermal insulation. It is determined by the ratio of the temperature difference outside and inside the room to the heat flow passing through the window. The higher this number, the better the thermal insulation efficiency.

Evolutionary double-glazed windows SmartGlass 2.0

Our multifunctional double-glazed windows work for you both in winter and in summer. In winter, sputtering of silver particles saves up to 90% of thermal energy heating appliances, and in the summer a double-glazed window reflects 25% more solar heat than ordinary plastic windows.

• 42% more HEAT in winter (energy saving properties)
• 25% less HEAT in summer (sun protection properties)

All our double-glazed windows contain special energy-efficient glasses. We DO NOT use ordinary glasses even in the most basic configurations.

AirDrive I, II and III climate control systems

Optimal ventilation mechanisms are built into the windows - the sashes open slightly by 1-5 mm, depending on the selected mode. These are NOT external devices (combs or valves), but BUILT-IN furniture ventilation.

Three options:

• AirDrive I: night ventilation (1 mode)
• AirDrive II: discrete multi-stage ventilation (3 modes)
• AirDrive III: discrete multi-stage ventilation (5 modes)

We try not to put combs because of them appearance(only at your request). In principle, we do not use valves due to the fact that they violate the integrity of the window, reduce its tightness and strength (since the profile and its reinforcement are drilled through).

There are several reasons why it is profitable to order plastic windows from the Prosvet Windows company. One of them is our own production base. Today, the buyer seeks to choose not just plastic windows, the prices of which correspond to certain characteristics. He needs to get first-class quality, high level service and warranty from the manufacturer. We can offer all this.

Long-term cooperation with the German concern REHAU allows us to manufacture high-quality plastic windows and sell them for the best the best prices. Manufacture of products takes place on modern equipment, taking into account all innovative technologies. Moreover, the company has developed own system certification. And now each of our clients is sure that when ordering REHAU PVC windows, he is completely insured against fakes.

The production process begins with computer processing of the data obtained during the measurement - the type of window, its dimensions, color, type of double-glazed window and other additional characteristics. The whole complex of works on the production of PVC windows is fully controlled. Before delivery to the site, the products are carefully checked by the Technical Control Department.

Why own production is beneficial?

The impeccable quality of the product, in which we are confident, is achieved. And we guarantee it to all customers who purchase plastic windows. The price pleases, the service is improving, the quality is growing - aren't these signs of a successful company?

Why own production is interesting?

The range of manufactured products is increasing every year. Treating work as creativity is a great motivation for all our employees. We can make beautiful quality windows And most importantly, we get real pleasure from the result.

Why own production helps?

Each customer is always primarily interested in the timing of the production of PVC windows. We respect our customers, so we produce windows quickly and on time. Our customers do not depend on anyone - from the production base, high-quality windows are delivered immediately to the objects, bypassing the warehouses of intermediary firms. This saves time and allows you to work quite mobile.

The production of plastic windows by the company "Windows Prosvet" is:

• Use of German REHAU profiles. We are official representatives of this brand have a license to manufacture window profiles REHAU in Russia.
• Scale production: more than 4000 square meters finished products per month!
• Huge selection. We are always happy to offer various options plastic windows and balcony blocks and fully ensure the installation of structures.

These advantages allow our products to win over competitors not only in quality, but also in all other indicators. We have our own production at our disposal, to which we give all our strength every day so that our customers have the opportunity to buy only the most best windows PVC of real German quality!

The price of PVC plastic windows under the order is slightly higher than the cost of similar models of standard sizes. For the production of products according to the size of the opening, we involve the company's specialists in the measurement. Modern equipment ensures exact observance of dimensions. Depending on the dimensions of the product, the quality of the profile and the double-glazed window, fittings, prices may vary up or down.

Production of plastic windows to order will cost less when ordering a wholesale batch. We also provide favorable conditions for cooperation to our regular customers. If the client wants to save money, our employees will offer several options for reducing the price without significantly changing the characteristics of the product. For every customer there is best option matching in quality and cost.

Production of plastic windows under the order

You can buy PVC plastic windows to order in stores and specialized centers. Turning to our company, the client receives competitive products at an affordable price. Delivery and installation are carried out by our employees and do not cause complaints. Over the years of our work, we have reached an indicator of 12 thousand finished structures and continue to increase production volumes. Contact us and order products that meet modern quality standards.

window manufacturing and pvc doors is the main field of work of PSK Constructions in Moscow. A plastic window is a system consisting of several cameras. General design differs in excellent indicators of reliability, quality and well keeps heat in the room.

Custom made PVC windows

Companies dealing with plastic windows must have high-tech production to create the highest quality products. The PSK Construction company offers to make plastic windows in Moscow.

We have been offering our services for many years, we are engaged in the manufacture of PVC windows and carry out glazing:

• Houses;
• apartments;
• loggias;
• cottage.

The manufacture and installation of plastic windows is a responsible job that should be trusted only to professionals. In the process of manufacturing PVC plastic windows and before ordering, the client can choose necessary design from economy class products, or expensive ones with additional energy saving functions.

In addition to the manufacture and installation of plastic windows, the PSK Construction company is engaged in finishing and installation work, which can significantly improve the aesthetic appearance of the mounted double-glazed window.

The production of plastic windows takes place in high-tech factory conditions, so the customer does not have to worry about the quality of the products. The PSK Construction company in Moscow offers only reliable options that will serve you for many years. The double-glazed window is resistant to mechanical damage and does not deform during operation.

Prices for the manufacture of plastic windows are democratic, so everyone can afford to install a high-strength structure at home.

Benefits of ordering a structure from a PVC window manufacturer

Polyvinyl chloride belongs to the category of thermoplastics. Products made from the material can be recycled, so they are completely safe for human health. In the manufacture and installation of PVC windows, the PSK Construction company uses only environmentally friendly materials that do not harm the average user. PVC window manufacturing technology complies with international quality standards.

Thanks to special additives, PVC window structures retain for a long time: resistance to light and atmospheric influences, original shade, excellent quality of texture and surface.

Stages of installation of double-glazed windows

1. Dismantling old windows
2. Removal of all types of seals and heaters;
3. Construction debris removal.

4. Alignment of the walls of the opening.
5. Installation and alignment of the window in the opening
6. Formation of a three-layer assembly seam

7. Window sill installation
8. Low tide installation
9. Slope installation

The cost of manufacturing and installing plastic windows

The service of manufacturing and installing PVC windows from the company "PSK Constructions" allows you to get not only a beautiful, but also the most durable new window. Custom-made PVC windows greatly simplifies the process installation work. The price list of PSK Construction includes detailed prices for all types of work. The cost of manufacturing PVC windows is calculated in advance.