DIY Bathroom Renovation - The Best Ways to Create a Beautiful Interior! (71 photos). We make budget repairs in the bathroom: inexpensive options for finishing the room Cheap do-it-yourself bathroom renovation
How to finish a bathroom cheaply is a relative concept. Depends on the financial condition and your personal wishes.
If you focus on the majority of the population living in apartment buildings, then you can pick up several, fairly budget options.
But first you need to consider ways to save money when performing finishing work.
Performing work on your own or attracting third-party hired specialists. Naturally, the implementation of a complex of works independently, will save a significant amount of money.
It is quite difficult to carve out finances on the wages of hired workers - the only option is to choose a specialist who has offered the lowest cost of his services.
Choice of finish. Rational planning and the use of modern materials can provide an opportunity to reduce the budget by tens of percent.
The use of the same type of finishing materials, differing in price. This method will reduce costs by 10 ... 20%, but there is a high probability of making a mistake with the choice of materials and running into a fake.
Conclusion: finishing a bathroom at minimal cost is possible when doing work on your own, from inexpensive materials, using a rational type of finish.
As an object of finishing work, bathrooms located in brick or panel houses (“Khrushchev”, “Brezhnevka”), as well as more modern buildings, consisting of 9 ... 14 floors with a typical layout that came from the Soviet era, will be considered.
Painting with paints and varnishes
This method is the most budgetary, low-cost in terms of materials and the amount of labor invested.
Preparation of the base, including the repair of the surface of the walls by applying plaster and putty. Treatment with antiseptic compounds.
Priming the surface with acrylic primers from the "aqua-stop" series - fasten the base structure and create a moisture-resistant film.
Applying a paint coating - you can use ordinary enamels based on pentaphthals (alkyd resins), the components of which create a smooth, moisture-resistant decorative coating on the base.
The disadvantage is that the pungent odor when dried will soar in the air for about two days. Another option is the use of acrylic enamels. They do not have a pungent smell and drying occurs within 1..3 hours. But the price is almost twice as high as compared to PF - enamels.
The junction of the bathtub with the walls is sealed using plastic elements or ceramic borders.
The price of finishing will be about 2000 ... 3000 rubles.
Wallpapering
For wet rooms, vinyl wallpapers with a moisture-resistant coating are used - “washable”. The surface of the walls, especially with uneven brick partitions, must be carefully leveled in order to make them flat.
The disadvantage of this type of finish is that moisture on the seams between the wallpaper sooner or later leads to peeling of the coating.
The use of a decorative finishing material based on fiberglass will help to avoid such a nuisance and significantly extend the service life.
Estimated costs 2000 ... 6000 rubles.
Covering with sheet panels
PVC (polyvinyl chloride) panel sheet size is 1 x 495 x 955 mm (thickness, width, length). Produced in a variety of colors and textures.
Under these products, a fairly flat surface is required, so leveling with plaster should be more thorough than with paint. Instead of painting operations, panels are glued.
The decorative material is fixed on the wall with glue from the "liquid" nails series, used in wet rooms and containing antiseptic additives against mold and fungus. Use of polyurethane mounting foam is possible. Panel processing is carried out with scissors or a clerical knife.
The cost of finishing works will be 4000 ... 6000 rubles.
Another budget option from the “how to finish a bathroom cheaply” series is the use of traditional plastic panels, which are board-shaped products.
The use of plastic panels
The plastic panel is made of PVC and structurally looks like a board with a width of 100 ... 500 mm, a length of 2600 ... 3000 mm. The section shows that between the two sheets there are stiffening ribs that give the product strength and lightness.
Fixing panels is carried out in several ways:
- Fixing on a wooden, metal or plastic crate by means of clamps, self-tapping screws or brackets from a furniture gun,
- Gluing on adhesive compositions from the "liquid" nails series
Mounting on polyurethane mounting foam.
In the latter case, you can omit the wall alignment procedure - this is due to the properties of the foam, which expands to fill the void between the wall and the panel.
The sealing of the joint between the panels and the bath itself is carried out with a silicone sanitary sealant or by means of a flexible plastic plinth.
The approximate amount of expenses is in the range of 5000 ... 7000 rubles.
The above finishing options were considered for cases of independent work. With hired labor, the cost of costs increases by about two times.
Finishing the bathroom in inexpensive and cheap solutions depends entirely on what materials, who will be, and how the finishing work will be carried out.
Share this article with your friends on social media. networks!
How to finish a bathroom cheaply: choose available materials
The article will tell you about how and relatively inexpensively you can sheathe a bathroom.
Even with a small budget, you can make a beautiful and practical bathroom When purchasing a new home or living in an old one for a long time, it becomes necessary to repair it. Any updates are associated with costs that even the most economical person cannot always afford. In the absence of a significant amount of money, it is not at all necessary to postpone the replacement of a damaged finish on the back burner. It would be wiser to plan a budget repair using inexpensive, but high-quality materials. And you should start with the bathroom, which is one of the most important rooms in the house.
How to start an inexpensive bathroom renovation
Repair, like any change, begins with getting rid of the old and unnecessary. And this process can be called the most pleasant and easy part of the work: coatings that have become obsolete can be safely removed from walls and ceilings without worrying about their safety.
Cleaning of the premises is carried out in several stages:
- Disconnect plumbing,
- Removal of old coating from walls, floors and ceilings,
- Removal of previous layers of plaster, screed and waterproofing residues,
- Cleaning the room from dirt and dust.
If you are going to make repairs in the bathroom, the first step is to choose a finishing material for the floor and walls.
After getting rid of debris, all surfaces must be leveled with cement mortar. Slots must be sealed with sealant.
An obligatory stage is the waterproofing of the room. For the floor, you can use a coating composition, which is applied to the screed in one or two layers.
Cheap do-it-yourself bathroom renovation: material requirements
The bathroom is characterized by a special microclimate, which leads to rapid wear of materials. Therefore, when making even low-budget repairs, it is worth choosing a finish whose performance meets the requirements.
The materials used must have the following properties:
- high humidity resistance,
- The presence of antiseptic additives that prevent the appearance of fungus and mold,
- Resistant to aggressive compounds used to clean the bathroom,
- Ease of maintenance.
When buying materials for the bathroom, you should ask the seller for a certificate confirming their quality.
The best option for the bathroom - smooth surfaces. Due to the absence of irregularities and various volumetric patterns, the material does not accumulate dirt on itself, retaining its original appearance for many years.
When choosing a finish, you should also pay attention to the possibility of self-assembly. A simple do-it-yourself repair will cost less (approximately twice).
How to paste over a bathroom cheaply: we decorate the walls
A significant part of the costs falls on the design of the walls, which have the largest area when compared with the rest of the finished surfaces. Wallpaper is one of the options for the economy class, but before you paste over the bathroom with them, you should think carefully. This type of finish is very unstable to high humidity in the room.
Painting with a water-repellent emulsion is the cheapest way to decorate walls. For finishing, a special composition is used on a polyester or acrylic basis, which is applied to the surface after it has been leveled. The paint lasts for 5-8 years.
In the bathroom, you need to choose tiles of this color and texture so that it harmoniously combines with other finishing materials and pieces of furniture.
Among the budget options, the following types of finishes also have the necessary properties:
- plastic panels,
- Ceramic tile.
PVC panels are an inexpensive material that saves not only finances, but also time. Plastic strips fastened together do not require preliminary alignment of the walls and removal of old finishes. The installation of the panels is quick and can be done even by a non-professional.
If you want to decorate a small bathroom inexpensively, you can consider laying wall tiles. This material is resistant to moisture and mechanical damage, has a huge number of colors. The tiled bathroom looks nice and neat. A small budget in this case will not be a problem: you can purchase domestic products that have more affordable prices.
Bathroom renovation options: how to finish the ceiling and floor
The ceiling can be decorated in the same way as the walls. For example, paint with white paint or install plastic panels. This option is the most economical and practical.
For a small bathroom, installing a stretch fabric can be an ideal solution. The cost of such a finish depends on the area of \u200b\u200bthe room, so installing a false ceiling in a small restroom will cost less than other options. Especially if you abandon the idea of a designer canvas and make it matte white.
PVC panels are well suited as a finishing material for the ceiling.
Finishing the floor is the most important task on which the safety of using all plumbing equipment depends. That is why experts recommend that the first step is to update the waterproofing in the room, and only then repair the coating itself.
For finishing the floor in the bathroom, two materials with high durability and a variety of designs are suitable:
Linoleum will cost less than tiles, but if we are talking about a small bathroom or toilet, there will not be much difference in their cost. Therefore, the choice of coverage in this case depends on personal preferences. However, it should be borne in mind that the installation of linoleum is quite simple and is done by hand, which also significantly reduces costs. Having given preference to the tile, you will have to work hard with its installation. Or finish the floor with the help of a specialist.
Renovation of a small bath: updating plumbing
Buying a bathtub and sink is the biggest expense in a renovation. However, you can save even in this case. The solution to the problem will not be the acquisition of new equipment, but the restoration of the old one.
If the bathroom is small, then when decorating it, it is worth using materials and furniture in light shades.
The update is done in two ways:
- Application of two-component polyester enamel on the inside of the bathtub (the cheapest option),
- Restoration with liquid acrylic (it will cost more, but the result will be more durable and beautiful).
If the bath is in a very poor condition, you can purchase an acrylic liner. This is a special insert that is attached inside the bowl with a sealant.
The listed methods may not seem budgetary, because. are not very cheap. However, in any case, it will be more profitable to restore an old bath than to buy a new one.
Self-renovation of the bathroom can be carried out at almost any income. It is only important to carefully plan the whole process and acquire the necessary materials. The modern market offers a variety of finishes, so choosing a high-quality coating of low cost is not difficult. The main thing is not to get carried away, trying to save as much as possible: you need to pay attention not only to the price of the material, but also to its properties.
We make budget repairs in the bathroom: inexpensive options for finishing the room
Budget repairs in the bathroom require careful preparation and selection of materials that meet all requirements. About the types of inexpensive finishes and ways to save money during repairs in bathrooms - read on.
The question of how to finish a bathroom cheaply worries many people in our country. Average salaries do not allow you to make expensive repairs in the apartment and force you to resort to finding a budget option. Some of them for some reason believe that their dream cannot be translated into reality, but in reality this is not so. You can achieve aesthetics, comfort, durability and safety of the planned repair, using even relatively inexpensive materials. How to do it?
How to save on materials without losing quality?
It should be understood that expensive is not always high quality, and vice versa. The high price may be due to, say, the possibility of application in special situations, while your conditions do not require such dedication. The significant remoteness of the store from the production facilities of the producing company can increase the cost. Sometimes you have to overpay for a well-promoted brand. The difference in living standards in different countries should not be ruled out - if a product is produced in a state with high average incomes of the population and high salaries for all employees, then residents of all other countries are forced to dump themselves on this sky-high salary if they want to buy specific products. In general, to finish the bathroom cheaply, you should approach the task wisely.
The high price of finishing materials does not always indicate their quality, so if you don’t want to overpay, you need to choose wisely
Economic glue
Let's start with a simple one - with tiles, or rather, with glue for it. Tile is one of the main materials for finishing walls and floors in the bathroom, and if it is often not worth saving on the tile itself, then glue is often overpaid. Consumers often prefer the famous Ceresit glue, refusing the cheaper Moment, without even suspecting that both brands belong to the same company. Of course, the two options differ from each other in the range of hardness, but for ordinary home repairs, as a rule, there is no difference. If for the walls there is still some point in acquiring more expensive consumables, then the tiles will not disappear from the floor even with the Moment, unless you arrange a dance floor in the bathroom.
Wall decoration
At first glance, it is obvious that the most expensive tile options may look more prestigious, but those who want to save money are more often interested in another question - is there a difference in strength and durability? It should be noted that usually it is still not there - you can trim the walls with cheap tiles for decades to come.
The difference in price is usually due to the attitude towards appearance - if expensive models are a real masterpiece, then budget options often seem to be done somehow, but most often this is just a visual deception.
The manufacturer can also save on non-slip coating, but if the finish is chosen for the walls, then this is not too important. Another thing is that laying tiles usually requires the involvement of professionals, so, in any case, this is not the cheapest option.
You can significantly save money by getting approximately the same result if you finish the bathroom walls with plastic panels. In terms of a variety of colors, they are not inferior to tiles, but they are much cheaper and much easier to install. Unlike tiles, damaged fragments are much easier to replace, and communications can be hidden under the panels. The installation of panels does not require leveling the wall, however, due to the additional fastening profiles, the area of \u200b\u200bthe bathroom may be slightly reduced.
Plastic panels - an economical option for finishing the bathroom
Of course, the most budgetary repair option is painting the walls. Even the most expensive paint will cost the owner less than the same plastic panels, especially since even a child can do the job, because the only thing that is really needed for this is accuracy. However, this option is very limited in application - if the walls are crooked, then it will have to be abandoned. Of course, the wall can be leveled, but it is not easy to bring it to the ideal on your own, and the call of a specialist forces you to delete this design method from the list of inexpensive ones.
Floor decoration
For the floor, tile is also an ideal option - although it is expensive, it is still optimal in terms of practicality and durability.
The most practical option for bathroom flooring is tile, the cost of which varies over a wide range.
Linoleum is usually used in classic competitors, however, it should be borne in mind that an attempt to purchase a cheaper version of it is fraught with the rapid destruction of the repair - the material does not perceive constant moisture well.
Actually, the most budgetary solution to updating the flooring in the bathroom is simply to lay a new rug, if possible, picking it up to match the walls and the rest of the finish. At the same time, in order to prevent the appearance of mold, the rug should be regularly lifted and the floor under it wiped.
Ceiling and lighting
Repairing the ceiling surface in the bathroom with a limited budget involves the use of plastic panels that allow spotlights to be built into the ceiling.
Plastic panels on the ceiling in the bathroom
However, lighting fixtures can also be left on the wall, the main thing is to place them correctly.
A competent approach to the layout of the premises, as well as cleanliness and order will make it visually attractive and worthy of dear guests.
Plumbing
It is undesirable to save on plumbing and pipes, because any accident will force the owner to start repairing the bathroom from scratch. The quality should be maximum, but sometimes it makes sense not to buy new plumbing, but to restore the old one. If the bath has not lost its integrity, but has problems with the enamel coating, then it is better to renew it - modern materials allow for various kinds of enamel restoration, and it costs much less than buying a new bath bowl.
Making repairs in the bathroom, it is not necessary to purchase new plumbing, you can simply restore the old one
The option of buying equipment that was already in use on the market is not excluded - construction companies that carry out regular repairs in public institutions (for example, hotels) can rent out removed plumbing for resale. At the same time, before implementation, it usually undergoes restoration to a normal functional level and costs much less.
Latest bathroom details
When the interior is almost ready, it remains to add the finishing touches that will make the room ready for its intended use - we are talking about a curtain, shelves and hangers.
Accessories for the bathroom can be purchased the most simple and inexpensive, this will not make its interior worse.
The curtain can be found at very low prices if it is made of film or inexpensive fabric. If it is possible to invest a little more money now, in order to invest less later, it is worth paying a little more for a curtain made of waterproof fabric - it will more reliably protect against splashing water and last longer. It is important to choose a beautiful design of the accessory, and then its low cost will not seem obvious.
As for the shelves and hangers, they just need to be placed correctly, hitting the overall color scheme. If neatness and order reign on the shelves, the guest will not notice much difference between expensive and cheap accessories, and vice versa - there is no point in overpaying for a shelf if the appearance of the jars on it raises vague doubts about the solvency of the owner.
How to cheaply decorate a bathroom: what can you save on?
How to refurbish a bathroom. What is worth saving and what is not. How not to overpay for plumbing. Budget option for repairing walls, floors and ceilings.
Bathroom renovations are costly. To date, prices in the construction services market are such that a team of professionals will have to pay at least 50% of the cost of materials. Doing the work yourself will save you a lot of money. However, this process requires not only extensive knowledge in many areas (from installing sockets to piping), but also skill. We will talk about how to repair the bathroom with your own hands in this article.
Expenses
Before you get involved in an adventure called "self-repair", study the prices. Look at the offers in the professional field, estimate the cost of materials, the time you plan to spend on repairs, and decide whether it is worth doing it yourself. It is difficult to predict the costs with high accuracy, but you can rely on the following current prices:
- floor tiles (30 * 30 cm) - from 50 rubles. per piece;
- wall tiles (15 * 15 cm) - from 40 rubles. per piece;
- porcelain stoneware slab - from 50 rubles. per piece;
- moisture resistant drywall (250 * 120 * 1.25 cm) - from 300 rubles. per sheet;
- PVC panels (30 * 10 * 0.5 cm) - from 15 rubles. per piece;
- bulk floor - from 200 rubles. for 10 liters;
- self-leveling floor with insulation - from 600 rubles. per sq. m.;
- latex paint - from 300 rubles. for 3 kg.;
- sealant - from 300 rubles. for 300 ml;
- grout for tile joints - from 130 rubles. for 2 kg;
- primer - from 250 rubles. for 10 kg;
- polypropylene pipes - from 24 rubles. per sq. m. for cold water, from 50 rubles. per sq. m. for hot;
- sewer pipe - from 50 rubles. per sq. m.;
- fittings for pipes (adapters, couplings, angles) - 60% of the price of pipes;
- tile adhesive - from 25 rubles. for 5 liters;
- shower cabin - from 18 thousand rubles;
- bath - from 6 thousand rubles;
- toilet bowl - from 3.5 thousand rubles;
- sink - from 2.5 thousand rubles;
- furniture with a water-repellent film - from 2 thousand rubles. behind the cabinet under the sink;
- heated towel rail - from 1.5 thousand rubles;
- mixer - from 1 thousand rubles.
Pay attention to the quality characteristics of the goods. The cladding material must be resistant to moisture and steam, the effects of salts, cleaning agents, including aggressive ones.
Floor
The most common option is 30 * 30 cm tiles. Thus, one slab is enough to cover 0.09 square meters. m. surface. Divide the total floor area by the area of each tile to get the required amount of material. Buy 7% more than what you received in the calculation to be prepared for unforeseen circumstances (combat, incorrect cutting). A good replacement for tiles can be porcelain stoneware. It is durable and decorative, but costs a little more. Calculate the required amount according to the same scheme.
Walls
Popular cladding materials:
- tile tiles - durable, waterproof, with a wide palette of colors;
- PVC panels - cheap, decorative;
- moisture-resistant wallpaper - a special composition with which paper is impregnated reliably protects against moisture and steam, but is suitable only for well-ventilated rooms;
- latex paint - the coating will protect against fungus and steam only if applied in several layers;
- decorative plaster - requires perfectly smooth walls, does not get wet from steam, but does not retain its original appearance for long.
The calculation of the required number of tiles, mosaics, marble, PVC panels for walls is carried out according to the same rules as for the floor. Paint consumption per 1 sq. m. is usually indicated on the product packaging. To estimate the right amount of wallpaper, divide the perimeter of the room by the width of the roll. All materials are best purchased with a small margin.
Ceiling
The best solution for the ceiling for a budget bathroom renovation is to paint with moisture-resistant paint, use plaster or PVC rails. Some use cullet, they are practical, easy to install. Specific skills for their gluing are not required.
Pipes and fitting
Pipes made of polypropylene are cheaper than metal-plastic ones, they are easier to weld into a monolith, hide behind a tile or in a drywall box. They bend well without loss of insulating properties. Fittings choose from a solid sheet of plastic, they perfectly protect against leaks, serve for a long time. Metal ones are only suitable for connecting a boiler. Pipes will be needed for a toilet, sink, washing machine, bidet, bath or shower. Based on where you plan to supply water, decide on the amount.
Tool
To carry out self-repair, you will need:
- tile cutter;
- diamond drill;
- beacons for alignment;
- level;
- apparatus for welding polypropylene pipes;
- drill;
- perforator;
- screwdriver;
- spanners;
- screwdrivers;
- putty knife;
- paint brushes;
- buckets and basins for mixing solutions;
- improvised means for removing excess material (cloth, sanding paper).
The set of props varies depending on the type of material selected. Don't rush to get the tool. To save money, you can rent it.
Repair stages
Work plan
Draw up a detailed plan of action, taking into account all the nuances. Decide which elements you want to replace, and which can be patched up, restored and left. Draw a rough sketch, select a color scheme, draw up a diagram of the location of water intake points, electrical appliances, plumbing. Estimate the estimate, decide on the type of material and its cost. In some salons, they provide a design service for free if you purchase facing material from them.
Dismantling
Take out the plumbing: bath, furniture, sink. You can leave the toilet. Then proceed to dismantle the old finish: ceiling and wall coverings. Stock up on trash bags and patience. If the tile installer did his job well, you will need a hammer, chisel, drill and puncher. Mounting with a perforator speeds up the process, but increases the amount of dust. You can forget about neatness and cleanliness. Oil paint is removed with a special solution.
Communications update
Old cast iron drain pipes will have to be removed and replaced with polypropylene ones. It is necessary to make an eyeliner to the planned water intake points - a bathtub, a sink, a washing machine. When laying pipes, do not forget about the installation location of the meters. To avoid stagnant water, lay the pipes at an angle. Provide a podium for a shower stall if you plan to install one. Do not neglect this advice to avoid stagnant water. The minimum drain slope is 5%. Consider ways to mask the wiring: you can make drywall boxes, after tiling them.
Don't forget to upgrade your wiring. It must meet all safety rules (have a high degree of protection) and functional. External and hidden cable laying is allowed. We advise you to provide at least 3 sockets: near the mirror surface, for a household washing machine and an additional one (for a boiler, an electric heated towel rail).
Floor covering installation
Floor repair begins with a screed. If there is no insulation, consider only the thickness of the tile. If you plan to use the "warm floor" system, add 3-4 cm to the screed. You will have to sweat with its installation. He might be:
- water - a pipe system with heating from the central water supply;
- film - infrared frame with thermoregulation;
- electric - a design of heating elements powered by a network.
Only a person who is well versed in electricity can implement this venture.
The work plan without a complex insulation system is as follows:
- treatment of a concrete slab with a deeply penetrating primer;
- installation of reinforcing mesh;
- laying a simple insulation (expanded polystyrene) on a reinforcing mesh;
- installation of beacons by level (the distance between them is 60-70 cm);
- preparation of a mixture for pouring;
- pouring mortar, leveling;
- removal of beacons;
- removal of irregularities (grinding, grouting).
The mixture hardens in an average of 12 hours.
Wall covering
tiles
Plaster the walls before laying, achieve a perfectly flat surface. Then cover them with a primer and water-repellent mastic. The next step is to apply markings for laying on the wall (use a building marker, stencil). After the surface is lined, it remains to put the tiles on the glue. Be sure to use plastic crosses in order to get perfectly even seams. It is better to insert 4 crosses per tile, placing them in the middle of each side. The last step is grouting. Do not forget to pull out the crosses, you may need pliers for this.
Plastic
PVC panels are a budget replacement for ceramics. Don't limit yourself to white. Now the stores offer options in a wide range of colors: stone-like, with ornaments for every taste, imitating brick, metal. It will take 1 evening to install plastic with a certain level of dexterity. Panels are planted on prepared, even walls using liquid nails, in other cases a metal profile is used.
wallpaper
Give preference to a special material with increased moisture resistance. Typically vinyl is used. It is dense, meets the stated requirements. Glue wallpaper on smooth, plastered walls, covered with a composition against fungus, mold. Glue is also used special, suitable for rooms with high humidity.
Ceiling installation
It is easier and cheaper to use plaster mixes. Most still prefer suspended structures, considering them more aesthetic. Let's talk about their varieties.
From PVC rails
As with walls, a PVC panel ceiling is the most budget option. They are mounted on a metal profile, installation takes a couple of hours. Despite the low cost, modern plastic panels are difficult to distinguish from a stretch ceiling, which is extremely difficult to install on your own. Now they produce PVC slats of various shapes, in a rich color palette, which allows you to create fancy multi-tiered structures.
Plasterboard
Look for special moisture-resistant drywall in stores. The installation of the box is not difficult. With the help of sheets, you can create niches for lamps, decorative borders. It should be remembered that the design "eats" 7-10 cm in height.
Stretch
A light-colored glossy vinyl film visually expands the room, despite the fact that it lowers the ceiling by several centimeters due to the particular installation. However, traces of condensation are clearly visible on the gloss. It is better to give preference to the matte variety.
Plumbing installation
Lastly, plumbing is mounted: a shower or bath, toilet, bidet, sink, faucets. Tip: It is not necessary to buy a new bath if the old one suits you in size. It can be updated by covering with acrylic. At will and possibility (depending on the area of the room), a cabinet under the sink, a cabinet for towels are installed.
Saving Secrets
Finally, we will give some valuable tips on reducing the cost of repairs without loss of quality.
- Take a closer look at domestic manufacturers of finishing materials and plumbing. You overpay for a brand of well-known foreign brands. Now on the market there are many goods from Russia and the CIS at a great price, not inferior in quality to foreign ones.
- Plan your expenses carefully. Without an estimate, it is easy to go beyond the budget, there is a high risk of spontaneous purchases. Reserve 10% for unforeseen circumstances.
- Monitor the offers of city flea markets. People often give away the remnants of the material for free (self-delivery), and not suitable plumbing at a price below the market.
- If you did not use insulation when screeding the floor, put a fluffy anti-slip mat near the sink and toilet. You don't have to endure the cold of the tiles.
- Even if you used cheap materials during the renovation, beautiful clean towels, an interesting shower curtain and an organizer for accessories (toothbrushes, cotton pads and sticks) will transform the most budgetary repairs. Use hanging stands for storage and keep the room clean. Don't litter it.
Before you do your own repairs in the bathroom, evaluate your strengths. You will save on money, but spend a lot of time and effort. Such work requires specific knowledge in the field of repair, at least a few free hours a day, responsibility and accuracy. On average, a person employed in the main 8-hour job can independently repair a bathroom in a couple of months. We hope that the tips of our article will help you to implement the idea. Good luck!
In our difficult times, people often lack funds. But repairs still need to be done. And it is desirable that the bathroom has a decent appearance and at the same time served for five to seven years. In such situations, it will be useful to learn how to repair a bathroom cheaply, spending a minimum of money.
Self-renovation of the bathroom: how to choose budget materials
Today, the industry produces building materials of various price categories, designed for consumers of various income levels. These can be economy, standard and elite class goods. There are also very cheap materials on sale, but their advantage is only in a low price. The quality and appearance of such products do not stand up to criticism.
Doing the dismantling work yourself will significantly help to reduce costs.
Many works can be done independently, without involving specialists. For example, filing the ceiling with plastic clapboard does not require any special skills. Installing plumbing is also not difficult. Toilet, bathtub, washbasin - all this can be mounted independently. It is only important not to rush, carefully study the range, calculate all the stages of the work performed, then a successful result will be ensured.
As for building materials, it is more expedient to choose goods of an economy class and a standard price segment. Both of these types of materials practically do not differ in quality. The same manufacturer may produce similar products under different brand names. The first will be considered a standard class product, and the second - an economical option, and they will differ only in cost. World standards provide for certain quality criteria, for example, the density of building mixtures for solidification must not be below a certain threshold. For economical materials, this indicator will be closer to the lower value. This statement is true in relation to consumables.
You can do without buying new plumbing, and restore the old
As for finishing materials, plumbing fixtures and other things, the low price is not at all the same as poor quality. It is only necessary to take into account the mode of loads to which the product will be subjected. For example, floor tiles should be stronger than wall tiles. With proper selection and installation, bathroom tiles can last more than fifteen years.
If you have decided to carry out a budget renovation of the bathroom, photo samples of which can be seen in the gallery of this article, you should not purchase building materials of elite classes. Their quality is not higher than that of budget products, and they benefit only due to their aesthetics.
Painted walls and well-matched accessories will make the design impeccable.
Possibility of economical repairs
In order for the result of the work performed to meet your needs, you need to carefully work out the preliminary project, think carefully about the possible finishes and choose the most suitable one for you.
The main part of the costs is the following items:
- the price of the work carried out;
- the cost of building materials and transport services.
Thus, it is quite possible to reduce the cost of repairs, and you can save on both points. If you carefully study the information on how to make a budget bathroom renovation with your own hands, it can be concluded that most of the work is quite easy to do on your own, significantly reducing costs.
Many repairs can be done by hand
It is not unreasonable to decide to resort to the help of professionals only for difficult moments, such as laying electricity, installing water supply, and laying tiles. It is very important that electrical work is carried out only by specialists.
Please note that the cable must be solid and well insulated. Only solid wire segments can be used, and the distribution box must be placed exclusively outside the bathroom.
Question, how to make cheap repairs in the bathroom with your own hands worries many owners. To prioritize between savings and the quality of the design of the premises, you should adhere to the following recommendations:
- Do-it-yourself work. It is desirable to do most of the repair yourself, since the prices for the services of specialists can exceed the cost of materials. All dismantling work is best done on your own.
- Having your own tool. It is necessary to think over the design features of the repair in such a way as to minimize dismantling work. A basic set of tools will help to facilitate and speed up the task. In addition, it will significantly reduce financial costs. It is recommended to get at least a minimum set, which will include a drill with a set of drills (preferably impact), a hammer drill with bits, a cut-off grinder with discs for metal and concrete.
- Economic materials. Significantly save money will help the purchase of budget building materials. But there are things that you should not save on, since a subsequent replacement can cost more than the original purchase of quality products. But in some cases, you can reasonably cut costs.
Reducing the cost of bathroom renovations
If you need a cheap bathroom renovation and qualitatively, pay special attention to scrupulous planning of expenses. A detailed estimate will help you save a lot of money. It is necessary to conduct a thorough comparative analysis of the pricing policy of the market. In addition, on the Internet, as a rule, you can purchase many materials at a significant discount, especially when purchasing in bulk.
Even from inexpensive, but high-quality materials, you can create a cozy and stylish interior.
To revive a boring interior and diversify the static surface, experts recommend purchasing inexpensive accessories and trifles that will add coziness to the room and become an appropriate addition to the design. Additional convenience and decoration can be shelves, hooks, soap dishes, rubber mats, curtains and other decorative elements.
You should not buy building materials and equipment from well-known manufacturers, as you will have to pay extra for the name. Branded items are a priori more expensive. It will be much more profitable to purchase building materials produced by domestic companies, as well as the production of our closest neighbors - Poland, the Czech Republic, Finland. These will be quality, certified products. Of course, we are not talking about goods from China in the lower price segment. However, their products of average cost will be quite solid. Remember that quality and aesthetics cannot be sacrificed for the sake of economy.
Pasting the walls with glass wallpaper will help save money on repairing the bathroom
Save on ceiling repairs
To design an original and unusual bathroom interior, and at the same time save money, you should first of all pay attention to cheap methods of finishing the ceiling in the room.
Smooth ceiling can be simply painted in any color
Tension structures look attractive and rich, but are very expensive. However, the appearance of plastic panels is no worse. An important advantage of suspension systems is that with their help any irregularities on the ceiling plane are easily leveled. In addition, this type of finish allows you to create multi-level structures. PVC lining refers to moisture-resistant materials, that is, you can not be afraid of flooding. It is easy to lay an electrical cable inside the rack ceiling and mount lighting. The price of such a system is quite affordable. Economical options for repairing a bathroom, photos of samples of which will demonstrate the feasibility of such actions, are presented below.
The rack ceiling made of plastic in its practicality is slightly inferior to the stretch
If the ceiling has only minor irregularities, it can simply be painted. To do this, it is necessary to remove the old top layer of the coating, apply putty, sand the bumps, and treat with a primer. After that, paint is applied in several layers. Such a finish will be very cheap, but it looks quite attractive.
Budget flooring
The specificity of the bathroom is constantly high humidity with insufficient air exchange. Therefore, the flooring must be resistant to moisture and wear. Ceramic tiles meet these requirements best of all. If you are considering a budget bathroom remodeling option, you should not buy expensive tiles of elite classes - it is quite possible to get by with domestic counterparts. In our country, the industry produces a lot of such materials, the cost of which will pleasantly surprise you. In addition, sales are often held in the markets and shops, where you can buy facing products at a significant discount.
Waterproof linoleum will become a reliable coating for the bathroom floor
There is an even cheaper flooring option, such as linoleum. The market offers a wide range of such coatings of various colors and textures. There are even waterproof varieties of PVC linoleum. The main advantage of this material will be that it can be laid literally within a few hours. Linoleum does not require gluing - pressed with a plinth, it will smooth out and level itself.
Wall finishing options
The optimal option in terms of price and quality for decorating the surface of the walls will be domestic tiles, which can be bought from leftovers on the market or warehouse. By purchasing a discounted product, you can save fifty percent of the cost or even more.
Tiles of domestic production will cost less than foreign counterparts
A plain tile, decorated with friezes or decorative inserts, will look pretty decent. And the price will be quite attractive.
An inexpensive repair in the bathroom, a photo of the samples of which is presented in the gallery of the article, can be done by sheathing the walls with PVC panels. There is a huge selection of domestic and foreign designs that deserve attention. Plastic lining is available in all sorts of colors and textures. There are also panels with imitation tiles, marble or wood.
Plastic panels can decorate both the walls and the ceiling of the bathroom
Professionals recommend choosing materials designed for outdoor use, since the plastic from which they are made is much thicker and stronger, and therefore will last much longer. PVC panels are easy to install yourself. Such work does not require special skills and takes very little time.
With the right approach, sensible planning and a well-designed estimate, it is quite possible to carry out a budget bathroom renovation. The rational selection of building materials and the independent implementation of the maximum part of the work will help to significantly reduce financial costs. If you follow the recommendations of experts, a beautiful interior will delight your guests and delight you for decades.
Considered the most expensive. It will be quite difficult to qualitatively carry out the registration procedure without resorting to the services of professional companies. However, often buyers with a small budget practice this. For the bathroom, you should purchase high-quality materials that can serve in conditions of high humidity. You need to understand that it is the properties that characterize the purchased goods that will affect the duration of their operation.
After buying a new home, any family faces some financial difficulties. That is why the finishing option must be selected rationally in order to ensure not only a long period of operation, but also a pleasant appearance of the room. Ideally, if you do everything right, you can get the highest quality restoration of the room at minimal cost. Next, we will talk about how to carry out a budget repair of the bathroom and toilet (photo in the article) on our own.
Material requirements
Even if the finishing materials are inexpensive, they must fully comply with all building codes. This is due to the fact that the microclimate in the bathroom has a number of features that accelerate the wear of materials. At the time of considering the purchase, it must be borne in mind that in such a room the humidity is increased, there is practically no ventilation and constant significant temperature changes occur. That is why all the materials with which the decoration is performed must have certain qualities. Then the budget repair of the bathroom and toilet will be 100% successful.
Moisture resistance
You need to understand that any finishing materials that are intended for use in the bathroom must have water-repellent properties. In such a room, the walls and floor will be in contact with moisture, steam and hot air.
The next point to pay attention to is the resistance to the formation of fungus and mold. It is advisable to give preference to finishes that have antiseptic additives, they will help prevent the appearance of pathogenic microorganisms. This is due to the fact that the room is constantly humid, so the fungus and mold quickly begin to accumulate.
Chemical resistance
Finishing materials that are resistant to household chemicals will be the best solution. Any hostess understands that the bathroom should be as clean as possible, and it is impossible to maintain hygiene without the use of aggressive detergents. Accordingly, you should choose something that easily tolerates exposure to chemicals. Among the materials that can "boast" of such a property, there are also inexpensive ones, which is especially important when performing budget repairs in the bathroom.
Ease of maintenance and installation
Another important property is ease of maintenance. When making repairs with your own hands, it is necessary to choose those materials that have a smooth surface, easily cleaned of dirt. Thanks to this, it will be easy to maintain order.
When choosing materials, making budget repairs in the bathroom, it is also necessary to take into account the ease of installation. The simpler this is done, the better it will be for the owner. You need to understand that if you have to hire professionals, then the cost of repairs can increase two or even three times.
wall decoration
This surface has the largest area. For the decoration of the walls, as a rule, the most funds are spent. If you want to reduce costs, you need to choose high-quality materials that are not so expensive. Don't be in a hurry to buy. To save money, you should visit trusted shopping centers, stores, or seek help from customer reviews who have already purchased one or another type of finish and tried it in practice. Wanting to make a budget renovation in the bathroom, you can not stop at the first available option. At the same time, it is fundamentally important to make the right choice in favor of the ratio of price and quality.
Coloring
The most budgetary and high-quality option would be staining. What is the advantage of this method? The cost is as affordable as possible, and anyone can paint the wall with their own hands. As a rule, moisture-resistant polyester or acrylic-based options are used for the bathroom. They are applied in several layers, rollers, brushes or an airbrush are used. Before applying the material, it is necessary to level the walls, so the painting process can take a lot of time, more than a week. Of the minuses, it should be noted that this type of finish retains a fresh look for no more than 8 years. In addition, to make the walls look attractive, it is advisable to entrust the painting to professionals. It is to this method of finishing that experts advise resorting to people who want to make the most budgetary repairs in the bathroom with their own hands.
Plastic panels
They are also often used in wall cladding. This option also does not apply to the list of expensive ones. It's about paneling. They are made from PVC. If you don't understand what it is, then you should explain. Such strips are made of cellular plastic. Their length rarely exceeds 3 m, and their width is 40 cm. They are connected to each other using tenon grooves. Such a panel does not require additional alignment of the walls, it can also be glued on top of the old finish. That is why this option is in demand for budget repairs in the bathroom.
Ceramic tile
A popular option for wall decoration is ceramic tiles. It costs more, but it has many advantages. Firstly, the tile is resistant to mechanical damage, and secondly, it is able to withstand changes in temperature and humidity. This option will be great for those who do not want to go beyond their budget, but would like to get a fairly high-quality finish. Among the inexpensive ones, ceramic tiles of domestic and Belarusian production are in demand.
Priority finishes
It is worth noting: if there is no opportunity and time to perform high-quality repairs in the bathroom, and it is urgently needed, then the best option would be to use plastic panels. They are easy to install even for inexperienced people: you do not need to prepare the walls for this process, as well as clean them from the old finish. This material is ideal for a budget bathroom renovation. The photo is a direct confirmation of this.
Choice of wall paint
As already mentioned, the bathroom is a rather specific room, so it is necessary to use paints with antibacterial properties and a moisture-resistant effect. Otherwise, the coating may peel off, a fungus will quickly appear. The most common paints are silicone, latex, acrylic. They are inexpensive and have excellent features. At the same time, it should be noted that water-based mixtures do not have an unpleasant pungent odor, and silicone ones can be a hydrobarrier.
Traditional oil paints do not have the above advantages. They crack quite quickly, so it is better not to use them in the bathroom. Even when making budget repairs in the bathroom, you should avoid such cladding products.
If you want to choose shades other than white, then calm and warm tones should be preferred. It is advisable to refuse dark ones, since such an option will visually reduce the space. Bright spots and complex patterns will also not bring a “zest” to the design. Soft pastel colors will expand the room and additionally fill it with light.
Paint can be selected matte, glossy or semi-gloss. The first option will allow you to remove drops, smudges, and such material will also be able to hide all wall defects. What is not suitable for a budget bathroom renovation with your own hands?
Wallpaper selection
It must be said right away that they must be waterproof. At the time of purchase, you should pay attention to the material. It should not be thin, and you should also ask about manufacturing technology. The most commonly used vinyl wallpaper on non-woven base. They are modern, have high performance, durable, can withstand the effects of water for a long time. Today it is easy to find a suitable decor option. Of the shortcomings, only the expensive cost should be noted, as well as the impossibility of mounting on ordinary wallpaper glue: you will have to buy a special mixture.
The second most popular wallpaper is washing. They belong to a cheaper segment, as they are inferior in their characteristics to the above option. Most often they are used in areas of walls where there is no direct contact with water.
Self-adhesive wallpapers are the most expensive. They are created from a polymer film, which is sold in various designs. Of the shortcomings, it should be noted not only the cost, but also how difficult the installation is. Moreover, before applying them, it is imperative to make the surface perfectly flat. Another good cladding option for a budget bathroom renovation. A photo of such a finish is present in the article.
Floor finish
Finishing the floor is also an important task, since the safety of all households depends on it, as well as ease of use. Professionals do not advise using cheap options that do not have surface waterproofing. After all, it is these materials that rarely help with leakage or breakdown of any household appliances. It should be noted that if the repair of the dwelling was quite a long time ago, and the age of the room is more than 30 years, then it is advisable to open the old floor during the reconstruction of the bathroom and completely renew the waterproofing. In this case, coating, painting or roll materials should be used. This also applies to budget bathroom remodeling options.
The second most important question is what kind of finish to choose. Linoleum is inexpensive. This material perfectly copes with mechanical impact, it is wear-resistant, and also pleases with its low price. Such a modern finish can last at least 15 years, after which it changes with maximum ease.
Further, the second most popular among economical users is tiles. You can buy both ceramic and porcelain stoneware. If your bathroom does not differ in overall floor area, then very little material will be required for finishing. Due to this, you do not have to spend large sums. This option will remain budgetary for those who will independently carry out the installation.
Professionals say that during the repair, regardless of the limitations in its financing, it is necessary to remove the old floor right down to the concrete base. After that, make waterproofing and only then level the surface using a screed. Only in this case the bathroom will be maximally protected from leaks.
Reconstruction
Traditionally, in Russian apartments, bathtubs are most often used, not shower cabins. That is why the cost of replacing the washing container can be quite large. As a rule, they make up from a quarter to a half of all expenses. Experienced people working in the field of bathroom design notice that it is better not to completely change all the equipment to cheap ones, but to improve those materials that are already available. For this, reconstruction methods are used that allow you to carry out a budget bathroom renovation with your own hands. What is it about?
The tub can be re-enamelled. This method will be the most inexpensive, which will not only restore the appearance, but also add shine. Enamel should be applied to the inner surface. You can do it yourself without resorting to the help of professionals. It is best to use a special composition of polyester type. Brush through two or three times. You can also use a roller or spray gun. In general, for a budget option for repairing a bath, this method is suitable.
The next low-cost process should be called restoration with liquid acrylic. A cast iron bath can be restored with this material. You need to apply it to the inner surface using brushes. This method is also called the "bulk bath". It should be noted that it costs more than enamel, but its effect is more persistent.
It is also considered a budget option to repair a cast-iron bath. Perform it by installing an acrylic liner. If the product is already in very poor condition, then it can be restored with a similar material that is installed in the base of the bathroom. The insert should be glued either with sealant or special glue. It is expensive, but the cost of acquiring such a bowl will be much less than the price of the bath itself.
According to reviews, many give priority to an inexpensive, but quite effective procedure for enameling a bath. It allows you to improve the appearance of the product. In addition, this tool guarantees a minimum of costs, which is ideal for budget do-it-yourself bathroom renovations.
If you want to make a cheap do-it-yourself bathroom renovation, then we will give you some tips, following which, an economical bathroom renovation will become a very real undertaking.
Let's figure out with you what you can save on when renovating a bathroom, without a significant loss in the quality of the repair.
If you have estimated your budget for a bathroom renovation and it turned out that you can not afford it, then you should not fall into despair. After all, even the economy version of bathroom renovation can be very attractive in appearance. In addition, it will not be difficult to do it yourself, which will further reduce the cost of your repair.
Budget bathroom renovation options
So, the budget has been decided. Let's figure out which jobs are the most expensive.
Replacement of plumbing fixtures and faucets.
If your plumbing is in good condition, great, it will save you a lot of money on bathroom renovations. If not, consider refurbishment. For example, a bathtub can be restored with acrylic. And the faucets are easy to disassemble and replace obsolete gaskets, clean them of limescale with ordinary vinegar. What we do not recommend saving on is hoses to mixers. A flood from a burst hose will cross out all the savings on repairs.
Replacement of communications.
Water and sewer pipes, fittings, heated towel rails, etc., are expensive in themselves. But the work on their laying also implies the chasing of the walls, or the ugly external laying of communications. Here it is already difficult to get off with cheap repairs in the bathroom. Therefore, we recommend considering the following options:
- If the pipes have not rotted and you are satisfied with their location, paint them with good enamel.
- You can also “sew up” communications in a plastic box, or in one made of moisture-resistant drywall. How to make a frame from a metal profile, read our article "".
Ceiling repair.
The budget option for repairing the ceiling in the bathroom will be its usual painting with latex water-based paint. But this is the case if you have a flat ceiling. If you need to level it, then an inexpensive repair option would be:
- Ceiling plastering followed by puttying and painting
- Ceiling trim with plastic PVC panels
To plaster the ceiling, clean it of old paint or whitewash. Prime it well with a deep penetration primer. Apply plaster to the ceiling and level it with a plaster trowel. Let the solution dry a little and trim it with a grater again. After the plaster has dried, apply the primer again. After a few hours, you can start puttying. Apply putty in a thin layer starting from the edges or from a place free from putty. So you will not leave dents on the already applied fresh putty. Let it dry, smooth with an emery cloth or sandpaper. Apply primer and repeat the cycle again. Then the ceiling can be painted.
To finish the bathroom ceiling with plastic panels, it is necessary to use a galvanized metal profile to create a supporting frame. Do not use wooden slats for this purpose. In conditions of high humidity in the bathroom, they will rot very quickly.
Mark with a level or level a horizontal line around the perimeter. Attach a guide profile to it. Make a crate using a wide profile 60x27 mm. Attach the panels to it and .
Wall repair
The most budgetary and economical wall repair will be a simple painting. Paint should be applied to the prepared wall surface. To do this, the wall must be smooth, clean and primed. Don't forget to apply penetrating waterproofing before painting. Choose a paint that is moisture resistant. Best latex or acrylic emulsion.
Another of the inexpensive options for finishing and repairing walls in the bathroom is PVC paneling. Here the sequence of actions is almost the same as in the case of the ceiling.
If you have a good but old ceramic tile on your walls, you can not change it, but restore it. Today there is a lot of "chemistry" for the restoration of the surface of tiles and tile joints. The same option can be used for floor tiles.
Floor repair
If tile floor restoration is not your choice, then there are other ways to make an economical bathroom floor repair.
For example, you can put linoleum on the floor. This is an inexpensive material, moisture resistant, quickly mounted.
You can also make a self-leveling floor. For more information on floor repair options, see our topic "".
Results
