Finishing a house from a bar. Finishing turnkey wooden houses Finishing a turnkey timber house

Services	Price
window frame	prices from 4.000 rubles.
door frame	prices from 4,500 rubles.
Met. tiles (without insulation)	prices from 1200 rubles/m2
Met. tiles (with insulation)	prices from 1300 rub./m2
Natural tiles (with insulation)	prices from 1,600 rubles/m2
Painting	90-100 rub./m2 layer
log skin	prices from 250 rubles. /m2
Platband installation	from 1 000 rubles side
Lining, imitation of timber	350-400 rub./m2
Black floor - plywood	250-300 rub./m2
clean floor	300-400 rub./m2
Log house assembly	2900-3200 rub/m2
Sanding the exterior walls of the house	from 250 rubles/m2
Wood processing primer-antiseptic	70 rubles/m2
Removing the pile manually with a sanding block 98x69 (to prevent moisture from entering through the pile)	80 rub./m2
Grinding end cuts at home with the application of oil for the ends. slices (calculation after the fact)	from 350 rubles/m2

If you think that having built a house, you get your dream ready, then this is not so. An important place in a wooden house is occupied by internal processing and the cost of finishing. wooden house. The masters of our company have many years of experience in finishing a wooden house and related work in this area, they can do a lot and know how to do a lot.

What does the house you've always dreamed of look like? Usually our consciousness displays some kind of abstract picture, in which there is definitely no place for the materials from which the facade of a wooden house will be finished, and you, most likely, have a very poor idea of ​​\u200b\u200bwhat your interior rooms will be like in your wooden house. The building materials market currently has a huge variety of products. In order not to get confused in choosing the right material on your own, our company offers to do it for you, so as not to get confused in the order of prices, you can see the table above. And then we will perform high-quality finishing at a low price, of course, taking into account all the wishes of customers. If you want to finish the house on a professional level, then this work is divided into several parts. You can see how much each work service will cost in the cost table.

Turn key from the inside. How to create comfort with decoration?

The first thing to achieve when finishing a wooden house is to give it warmth and comfort. Interior decoration of a wooden house Moscow, buildings (houses, baths) are divided into the following parts:

• Initially, the finished house is subjected to grinding. This is the least expensive part of the work.
• Next, install the internal partitions of a wooden house, which will be a frame.
• After that, the house is insulated and the necessary waterproofing is done.
• Ceiling decoration is usually done with lining.
• The processing of the walls of a wooden house also takes place with the help of lining or other material is used for this.
• Floor finishes are made with laminate.

Clapboard is the most profitable and convenient material for decorating a cottage. In addition, lining is environmentally friendly, it has high rates of thermal conductivity and sound insulation. With the help of lining, you can finish both the cottage and the baths. Well, there is no doubt about the pleasant appearance of the lining. It will be a pleasure to spend time in such a bath!

Our company also provides services such as coating wooden frame special protection, and we also carry out painting of the building, you can place an order or see the prices for these services from our website.

Finish a wooden house on a turnkey basis. What will the house look like?

Finishing the outside of the house is not only about creating a beautiful and presentable look, but also the function of protecting the building from the weather, which happens very often.

Exterior wood paneling consists of the following steps:

• Installation of a wooden box. It is necessary in order to prevent distortion of the door and window openings during the shrinkage of the whole house. Usually this service can be issued immediately after the completion of construction. Prices can be viewed on the website.
• Caulker at home. It is one of the options for its insulation. As long-term practice shows, it is the most proven option. Caulker is not only reliable, but also costs quite democratically, which is important for many. If you wish, you can call our company to calculate more detailed prices.
• Painting and sanding houses with antiseptic solutions. Grinding combines several tasks at once. First of all, she makes the house beautiful. And also with such wall decoration, you can subsequently apply paint or varnish in an even layer. To pick up the right paint, it is necessary to take into account that the house must "breathe". Accordingly, the price of painting a house will directly depend on the price of materials and the amount of work.
• Insulate the house inside by insulating all the walls in the house
• Finishing a wooden house outside siding. Internal processing walls of a wooden house with clapboard or other materials. Finishing baths and saunas is also usually done with lining, which is convenient and practical and at a low cost.

How to determine finishing prices?

Our company trusts only reliable suppliers of materials at affordable prices, which, thanks to long-term cooperation, provide us with a 20% discount on the cost of materials. Therefore, we can afford to significantly reduce the cost of repair work so that you can place an order at affordable prices without losing the quality of home decoration. You can find out the prices in the corresponding section of our portal, there is also the price at which they finish wooden structures and baths. The final cost can be made upon request by our managers. We will create comfort in your home!

Treatment wooden structure- no less important process than building a house, in general. Therefore, it is recommended that he pay no less attention. Only in this case, the house will end up with a price that suits you. In Moscow, the decoration of a wooden house can be external and internal.

Of these two types, the price of finishing on the outside is considered the most important, because. it not only fulfills its direct task - it provides a beautiful view, but also performs a protective function. Therefore, it should be thought about at a time when the house exists only as a project.

Features and cost of finishing a wooden house from the outside on a turnkey basis

The most popular material for finishing is siding. The house can be made of polymer raw materials, as well as steel, copper or aluminum. The price of siding trim is very low and easy to perform. Also this finish has a pleasant appearance. In addition, siding has several advantages: This finish has a long service life, it is resistant to ultraviolet radiation, as well as dust or weather. Another practical material with which the decoration of the house is done is lining. And in last days consumers are very popular with special finishes of houses that imitate a log look. Insulation as a finish for a wooden house includes a layer of insulation, which increases its thermal insulation performance. Prices for this service can be found on the website.

It should be borne in mind that the exterior decoration of a wooden house not only changes the look of the houses, but also completely protects it from the vagaries of nature and environmental influences. In case you want to change, or the finish is outdated, has become unusable, our finish is easily changed to a new one. That's exactly what is not desirable to use as a finishing material, so it's plaster. In this case, the house simply will not "breathe", which will lead to the fact that sooner or later the tree will begin to crack.

You can not use any materials for exterior decoration at all. But for this it is necessary to treat the timber with a special solution. And you need to do this once every five years, at least. Otherwise, the house may be invaded by insects, bacteria or mold.

Finishing a wooden house on a turnkey basis

Before proceeding with interior work related to finishing, it is necessary to process the wood from the inside. After the log house is finished, it is thoroughly cleaned and then polished inside. After that, the wood is coated with protective solutions, and in several layers. To give maximum smoothness to the walls, they can be coated with an appropriate composition. To make the house seem made of wooden walls and inside, you need to achieve this effect with the help of special coating which gives the appearance of pure wood. You can also apply artificial cracks and scratches for even greater aesthetics, as happens on a real tree.

And after that, you can use a flight of fancy on how my house will look inside.

If you want to achieve absolute smoothness of the walls and tint them, then you need to take into account the fact that the toner will look different depending on the type of wood. To achieve the desired shade, paint should be applied with one brush, twice and in one direction. Apply more first light tone and then go to dark. In this case, you should not completely smooth the natural color of the tree. It is only necessary to effectively emphasize it. But what kind of color to choose - a smooth glossy or matte - it's up to you.

During the finishing of the house, it is desirable to keep general style and the trend of the house. The natural shade of wood can be combined with other decor materials that have different costs. It can be stone, ceramics, the same tree, but of a different breed, etc. The floor is usually covered with cedar or larch materials, which are the most practical combined with a beautiful appearance.

At the same time, the floor finish should be in harmony with the walls, otherwise a single composition will definitely not work. The floor can be toned, this service also has its cost. In this case, the color scheme is usually used darker than the one used for the walls. All together, this will not greatly affect prices.

It should be noted that when carrying out work, no matter internal or external, we do not recommend saving on materials, as well as limiting ourselves to only one stage. Such an approach can not only disrupt the appearance, but also affect the durability of the entire house for the worse. Quality work can be purchased at the construction company "Secular House", the price will pleasantly surprise you. Before placing an order for affordable prices, check out the price list of the cost of finishing, our consultants will tell you how our prices are formed, and you can easily make sure that wooden houses can be made very cheaply with our finishing.

Services	Price
window frame	prices from 4.000 rubles.
door frame	prices from 6,000 rubles.
Met. tiles (without insulation)	prices from 130-1400 rubles/m2
Met. tiles (with insulation)	prices from 140-1500 rubles/m2
Natural tiles (with insulation)	prices from 1800 rubles/m2
Painting	prices from 90-100 rubles/m2 layer
log skin	prices from 300 rubles. /m2
Platband installation	prices from 600 rubles opening
Imitation of a bar, in agony	prices from 450-500 rubles/m2
Black floor - plywood	prices from 250-300 rubles/m2
clean floor	prices from 400-500 rubles/m2
Log house assembly	prices from 3000-3200 rubles/m2

Wooden houses are now very popular among the population. And the reason for this is the many advantages of such buildings in Moscow. Assembling a house from a bar takes a very short time, their appearance is very presentable, and to order, the price of such a structure is available to most consumers, unlike, for example, brick counterparts. In addition, wooden houses have excellent thermal conductivity in cold weather, and in summer they give the house coolness and comfort. Finishing can be different materials not only inside, but also outside. Let us analyze in more detail the issue of a house made of timber.

Finishing the house from the outside on a turnkey basis in Moscow

Built wooden house turnkey already in itself has a beautiful view. He, as it were, hints at the proximity to the nature of his master. Therefore, many people want to leave such a pristine and natural look and generally do not veneer the house from the outside. In this case, a special solution consisting of antiseptics is simply applied to the bars to prevent the formation of mold and fungi. And after that the house is covered with varnish and paint. All these measures are necessary so that any pests and microorganisms do not encroach on the structure, it does not undergo deformation and would serve you for many years. Note that it is necessary to paint the turnkey cottage constantly to ensure its durability.

If you do not want to use paints and varnishes, then a variety of decorative items. Usually they are resorted to if you plan to stay in the house during the cold winter period of the year. The first finish is the insulation of the home. And only after that, the exterior is finished with the material that you like. Let us analyze in more detail how exactly it is possible to veneer a house from a bar qualitatively and inexpensively.

For example, finishing with materials such as stone, granite or porcelain stoneware

natural or fake diamond- an excellent and very effective material for finishing the house. In addition to giving houses an aesthetic appearance and properties, the stone has great strength, it does not allow moisture to pass through, and does not respond to temperature changes. If you decide to go with stone exteriors, this would be a great choice. Your home will be reliably protected from the effects of adverse weather conditions and will serve you for many years.

Stone can be used to cover the entire house, or only partially. In any case, this finish goes well with wood. Also on sale is usually a wide variety of options. decorative stone. Therefore, you can easily let your imagination run wild and try yourself as a designer.

Another finish with a material that looks like stone is porcelain stoneware. He also looks very elegant and noble. Porcelain stoneware perfectly withstands temperature changes and mechanical stress, is not afraid of high humidity and other natural influences. In addition, it perfectly repels dust and dirt. And if you still need to clean it, then it is very simple to do it.

Finishing is made by the most popular material - brick. Brickwork will always look beautiful and aesthetically pleasing, suitable for any style of home. Well, everyone knows about the excellent performance characteristics of this material. It is reliable, retains heat well and is durable. Brick, along with the insulation used, will further increase the thermal conductivity of your home. However, in order to achieve maximum effect, both in terms of thermal conductivity and aesthetics, brickwork should be done by a qualified craftsman with experience. And it is also not recommended to purchase material options for this, the prices of which are low.

Finishing houses from timber using plaster in Moscow

This material is designed to protect the building from environmental influences, as well as to make its appearance more attractive. Plaster performs the function of insulation, protects houses from mold, bacteria and moisture penetration, and it is also convenient because when it is applied, you can hide all the uneven walls and similar construction flaws. As a result, a special structural or relief mixture can be applied to the walls, which is decorative in nature.

However, the plastering process is not the easiest. This finish requires the presence and experience of certain skills. If you do not have them, it is recommended to trust professionals. They will definitely do an excellent job. Plastered walls can be painted to further highlight the relief or structure. The pricing policy for these services can be viewed on our website.

Finishing a house from a bar using siding in Moscow

Finishing log houses with siding - the price policy of this material is low and easy to install. However, in the end it will look nice and neat. Siding well protects the structure from the effects of nature - precipitation. Also on the market there are a huge variety of different options for this material. Therefore, you can safely fantasize about how your turnkey cottage should look like. Consider the types of siding and ah prices.

1. Metal siding. Typically, this type is used when facing the timber of industrial buildings than in the residential sector. The metal is strong and flexible at the same time, it also has a long service life. However, the finish has flaws. Metal is a very heavy material, its price in itself is high, moreover, in the event of a mechanical impact, dents will remain on it. In addition, steel is susceptible to corrosion. Therefore, it will need to be further processed by special means.
2. Vinyl siding. If you look from the side, then such a finish will resemble ordinary boards. The only difference is that vinyl does not degrade over time. The price of this material for timber is very cheap, it is light, and besides, it is easy to install. It is easy to wash and does not require any additional care. On the market you can find a wide range of such products. Vinyl siding is not exposed to sunlight, retains its color for a long time, it is not attacked by fungi and bacteria. To remove dust, the siding can simply be periodically wiped with water and detergent.
3. Cement siding. This is a very durable material, in addition, it is fireproof. However, cement is not popular among the population. And the reason for this is a decent mass of raw materials, which affects the ease of installation and transportation. Also, the weight of the whole house increases significantly, not to mention the foundation. Yes, and to order, the price of cement is not the most democratic.
4. Wood siding. It is extremely rare that the finish is used for the outside. Usually wood is used inside the building. The prices for the material for facing the timber are high. And its main disadvantage is the ability to absorb moisture, which negatively affects the service life of such siding.

Home decoration work using panels that imitate logs

It may seem strange that a house built from a bar needs to be covered with a material that imitates it. This is true, for example, for old houses made of timber, the logs of which are no longer pleasing to the eye with their attractiveness. The tree tends to darken, absorb dirt, and be damaged. It is not always financially possible to build a new cottage on the site of the old one. Much cheaper will be the price of finishing to sheathe the outside with imitation material.

But wooden panels are used only when you plan to completely repeat the contour of your building, retaining its naturalness and original appearance, and at the same time insulate. The panels completely copy the profile of the bars or profiled timber. Moreover, this siding is so realistic that it is almost impossible to detect an imitation with the naked eye.

Before finishing, the walls are covered with specialized solutions to protect against mold, bacteria, moisture, fire and various pests.

Fachwerk - decorating a house in this style

A very original and effective choice. This medieval style is very popular in Europe. And in our country, many consumers prefer finishing in this style. Finishing materials for an affordable price are chipboard and cement boards, as well as OSB panels. To complete the fachwerk style, you need to make the following elements:

• Frame made of vertical and horizontal partitions
• Wooden braces
• The gaps are filled with various finishing materials, such as brick, stone or something else.
• The wall is decoratively divided by a bar into geometric shapes. Details for this can be crossbars, braces, etc.

How to finish a wooden house inside?

The interior decoration of timber houses also has a wide variety of materials. In contrast to the exterior decoration of a house made of timber, more attention in this case is paid not to the strength characteristics of the material, but to its decorative properties. Those. finishing should be suitable for future furniture and other decorative elements, successfully fit into the overall style and interior of the house. You can not be limited to one material, but apply several, it is enough just to maintain harmony and aesthetics.

The use of decorative stone

A very good option, ordering a house from a bar, where the walls are relatively even. Therefore, laying them out with a stone will not be difficult. In addition, the stone has many advantages:

The walls can be painted in whatever color you like and which suits your interior. In addition to the aesthetic function, the paint can protect the tree from the effects of fungi and bacteria. Before the painting process, the walls must be leveled, covering all the cavities and cracks. After that, the surface of the timber is primed so that the paint fits better on the timber.

Paint is desirable to choose environmentally friendly. When dry, it should not emit bad smell. And you should pay attention to the fact that in the end the wall can have a glossy or matte surface. What exactly - the choice is yours, what you like best or what suits the style of the room more.

If you don’t want to change anything at all, but there is a desire to preserve the naturalness of natural wood, then you can emphasize it even more with the help of colorless varnish and stain.

Finishing a house from a bar, using siding or plastic and wooden lining

If your cottage is already quite old, but you still gravitate towards natural wood, then, as an option, you can use lining in the decoration. However, lining is not final finishing and this must be kept in mind. The tree is usually subject to decay, besides, all sorts of insects and mold love it. After finishing the house from a bar with a clapboard, it must be treated with specialized compounds for protection, as well as varnish.

Yes, perhaps decorating houses from timber with clapboard is not the easiest thing to do. However, you end up with a natural look. natural wood, which will always delight you and your guests, also at an attractive price. Your old building will get a second life. If desired, you can successfully perform wooden clapboard and stone. A better and more natural combination is hard to imagine. Thus, you can model and make the design as original as it seems to you.

Another material for an affordable price for finishing a wooden house is plastic siding. It also has some advantages. It is easy to clean and does not absorb water. Therefore, such an option for such a price of finishing will be optimally suited for bathrooms or kitchens. In addition, the plastic is lightweight and very easy to install. Also, which is very important, the ease of installation means that you can handle it on your own. It does not require any special knowledge and skills. This way you can save a decent amount of money. Yes, and prices plastic siding much less than the competition.

Finishing the walls in the house with drywall

This material is the most popular among consumers at this time. With its help, the walls are quickly aligned to an ideal state, its price is low. In addition, all sorts of decorative elements are made from drywall, for example, arches, roundings, partitions, etc. There is a place where the designer's fantasies roam. However, drywall has one unpleasant drawback - it hides part of the room. Therefore, it is not recommended to use it in small rooms.

By itself, drywall is not the final finishing material. It is usually pasted over with wallpaper, painted or other facing material is used.

Having completed the house from a bar, you should not think that all the most complex work finished. On the contrary, the most interesting awaits you ahead! To create a comfortable atmosphere, you need interior decoration house that requires more detailed attention. And below you will learn how to do the interior decoration of a house from a bar with your own hands, watch instructional videos and photos, which will allow you to more clearly familiarize yourself with the process.

If you have never encountered such work, then be prepared for the fact that this is a whole range of activities, which includes:

• laying of communications (water supply, heating, electricity, sewerage);

• impregnation of wooden walls with fire-resistant compounds and antiseptics;

• waterproofing and thermal insulation of the floor, walls and ceiling (if necessary);

• subfloor device;

• installation of partitions and other structures;

• preparation of ceilings, walls, floors under decorative cladding(alignment, installation of a frame for fixing the sheathing material);

• finishing walls, ceilings, floors;

• installation interior doors, lighting fixtures, switches.

Attention! If you have not previously encountered any of the above works, we recommend that you entrust this responsible matter to specialists. Even though you'll be gone more money than originally planned, you can be sure of the quality. First of all, it concerns communication. You can basically handle the rest of the tasks yourself.

It should be noted that the interior decoration of a house made of timber with your own hands is a very responsible business. For this reason, before embarking on it, draw up a design project where all the nuances will be spelled out. For example, the location of the electrical network, heating pipes, sewerage, etc.

It is necessary to clearly define all the points discussed above: from draft materials to decorative coatings - their type, quantity, color, cost, texture, etc.
Another important point to be aware of is that all wooden structures shrink. This process can be divided into two main steps:

1. Primary shrinkage - usually continues during the first two years as a result of the drying of the wood. During this period, gaps decrease under the weight of the roof between the bars, cracks of various sizes can form inside and outside the room. Moreover, the walls and ceiling may shrink by two to three centimeters. As a result, experts do not advise using rigid structures during the finishing of ceilings and walls (for example, plastic panels, drywall) until the shrinkage is finally completed.
2. Secondary - associated with fluctuations in temperature and moisture content of wood. Usually it is insignificant and most likely will not affect the internal facing coatings. What can be the interior decoration of a house made of timber in the first years after construction is completed? In this case, you should do the following:

• perform plastering of load-bearing structures and cover them with paints and varnishes that protect wood from decay and mold;

• make a two-layer subfloor;

• use a stretch fabric or leave the ceiling the same.

In any case, we will consider the most popular ways to decorate the floor, ceiling and walls - both for houses that have already shrunk, and for those that are in the process of shrinking.

Finishing and rough floor

Subfloor installation

First of all, a rough floor is made from timber in housing. We recommend opting for a double floor structure - it will better save heat inside the room.

What is a double subfloor? Special logs are made, a heater with a waterproofing layer is laid between them (for example, mineral wool). Then all this is covered with boards, and then comes the final floor covering. This is the most economical, simple and effective option in terms of providing sound insulation and saving heat.

In the role of a cleaner floor covering v log houses Typically the following materials are used:

1. Planed sheet pile board, which has a lot of advantages, of which I would like to highlight the following:

• environmentally friendly material, resistant to moisture and "breathes" (thanks to special impregnations and natural data);
• durability and strength - another advantage of the sheet pile board (this floor is easy and convenient to care for);
• modern variations of tinting and surface treatment allow them to harmoniously fit into almost any interior;
• if necessary, the flooring can be renewed by ordinary sanding of boards or sanding.

1. If in the role additional heating using infrared or water system"warm floor", then you can forget about floorboard. This is because most of the heat is spent on heating the sheet pile. In this case, a parquet board or laminate is usually used for laying the finishing floor.

Attention! When choosing a laminate / parquet flooring with underfloor heating Special attention it is worth paying attention to the marking, which should mean that this coating has good heat conductivity.

Do-it-yourself interior decoration of the walls of a house from a bar: video, photo

As noted above, the interior decoration of the walls in such a house implies their careful preparation(insulation, puttying, vapor and moisture insulation), as well as subsequent sheathing with a finishing coating / material.

Before you finish the walls, answer yourself the following question: “For what purposes is the built house being used?”.

If it was built to spend summer holidays and weekends in it, then you can save on insulation. Otherwise, it will be impossible to live here in winter.

Well, if on the contrary, then it is necessary to insulate the walls. If we talk about the finishing coating of the walls, then in this case a huge number of interesting solutions are offered. But when the house is shrinking (the first two years after construction is completed), limit yourself to varnishes, paints or a simple stain.

This treatment, above all, is notable for the fact that the natural grain of the wood is preserved. The tree itself has original patterns that nature itself painted. What is the point of hiding all this beauty? This technique is especially effective if the walls of the house are built from a bar of valuable species.

Attention! When choosing a good paintwork We recommend giving preference to those that contain fewer harmful substances. Modern paint is semi-gloss, matte and glossy, which is also important to consider when buying.

In this case, if shrinkage has already occurred, the interior decoration of the house from a bar can be done sheet materials. The most popular of them:

• drywall - actively used for interior work. And this is not surprising, since it allows the creation of a wide variety of architectural creations. Moreover, it has a small specific gravity, easy to process and environmentally friendly material. Its cost is very pleasant, despite many useful qualities. Instructions for its installation involves mounting on a wooden or metal carcass which is being built on wall structures. This system is convenient in that the drywall and timber will not come into contact - this will save the skin and bearing walls from crack formation. Behind such material, you can hide plumbing, electrical wiring and other communications (not to mention the insulation layer).

• Wall panels Isotex. As a rule, they are made from wood without glue, therefore they are hypoallergenic and environmentally friendly. Their advantages include sound-absorbing properties, good thermal insulation characteristics and easy installation. Acting as an outer cover linen fabrics or vinyl wallpapers. In building stores you will definitely see a wide selection of such products, which are made in different textures and colors.

• Interior decoration of walls with imitation of timber - lining, siding, MDF panels, block house. Many people like Russian log huts, but this is quite an expensive pleasure. For this reason, it is necessary to build from more budget material- glued or profiled timber with a rectangular cross section.

With the help of interior decoration with imitation of timber, you can give your home the missing nobility without significant costs time, money and effort. Application with this facing is very difficult to distinguish from natural logs.

Among the main advantages it is worth highlighting:

• A wide range of applications - such panels can be used both for interior decoration of a bath and for exterior cladding of buildings. Unique properties material allow to achieve high resistance to temperature extremes, moisture, ultraviolet radiation and other harmful effects.

• Environmental friendliness - a favorable microclimate is always kept in the house. Well, if you use larch or pine panels, then the air in the house will become healing.
• Simplified installation - the groove fastening system facilitates cladding and also makes decorative coating solid and monolithic.

As you may have guessed, the interior decoration of a house made of timber can be original and varied and harmoniously combined with the chosen style of interior design.

If you have planned repairs, then do not forget about the ceiling.

In this case, you need to start from whether shrinkage is due to finishing work or not. If not, you can realize any ideas using a variety of materials.

• Do stretch ceiling, which will close the ceiling well and will not be afraid of shrinkage at home.

• Leave the ceiling the same. Well, if the interior will match your approach. The unlined ceiling goes well with styles such as Provence or Country.

Conclusion

Any interior decoration is a complex event that solves several important tasks. For this reason, it must be treated especially responsibly. Only in this case, the desired comfort, coziness and warmth will reign in the house.

Upon completion of laying the foundation, erecting the walls and roofing system, the new wooden house is completely ready for the most important process - decorating the internal surfaces and external facades. Or finishing a turnkey wooden house. Most companies offer finishing services, but after long period time, waiting for the complete shrinkage of the structure. We are ready to save the client from unnecessary waste of time and start responsible exterior and interior decoration of a wooden house immediately after the completion of glazing surfaces and mounting doors. This option is available through the use of the most modern technologies production of building materials, the latest equipment and innovative construction methods. The customer will receive a project, completely ready for operation, in the shortest possible time, with a full range of functional advantages and at a reasonable price.

Professional finishing of external facades of your house

Our company provides a variety of services for finishing a wooden house. Regardless of the place of finishing work, first of all, preparatory operations are necessarily carried out - complete preparation of floors and load-bearing structures for coating with finishing materials. This process extraordinarily important, because lack of careful surface care can lead to the development of destructive processes leading to deformation of the frame of the house. Do not ignore the preparation for decoration. This is the key to successful and long-term execution of the project.

The exterior decoration of a country wooden house is very diverse and creative. Here you can apply a variety of building and finishing materials with a variety of interesting textures and external data. Many customers prefer to subtly emphasize the unique wood pattern without hiding its qualitative advantages. This decor allows you to unify the building, add authenticity and harmony. general view building. The main elements that are decorated in the process of finishing a wooden house from the outside are: plinth, railings, stairs, roofing, balconies, terraces and other external elements of the facade. Designers can offer a wide variety of color and texture solutions for the client's choice.

State-of-the-art interior finishing solutions

As in the case with facade works, the interior decoration of a wooden house necessarily begins with preparatory operations that will ensure sufficient air circulation, prevent rotting and deformation of the floors. The next stage in decorating the premises is the finishing of the floor and ceiling. Here the main direction is set by the client, choosing methods and materials for finishing. Often used as flooring parquet board, variety of options linoleum or porcelain tiles. Ceiling structures carry a visual and functional load, being a source of light. It is very important to take care of complete arrangement communication component - pipelines, electrical wiring, sewers, heating, ventilation, air conditioning and signaling.

Wall decoration is also very diverse - from the simplest coating with varnish solutions to the creation of unique creative decorations. Experiments and vivid imagination, together with advanced specialists, will help create functional and beautiful coverage capable of lasting for a long period.

Finishing wooden houses Prices vary widely depending on complexity. technological processes, labor input and quality desired result. With the help of qualified professionals, you will definitely be able to create a practical and aesthetically pleasing beautiful project for a reasonable price.

Price list for interior and exterior decoration of a wooden house

Name	Unit rev.	unit rate *
Departure of a specialist (up to 60 km from MKAD)	-	1500 rubles
Departure of a specialist (from 60 to 100 km from MKAD)	-	2000 rubles
Dismantling works
Dismantling of roofing roll coating(roofing material)	sq.m.	75 rubles
Dismantling roofing sheet (metal tile, corrugated sheet, slate, ondulin)	sq.m.	100 rubles
Dismantling roof structure	sq.m.	100 rubles
Dismantling the lining without saving	sq.m.	55 rubles
Dismantling of lining with preservation	sq.m.	100 rubles
Dismantling the floorboard (on self-tapping screws)	sq.m.	100 rubles
Dismantling the floorboard (on nails)	sq.m.	150 rubles
Installation work
Installation screw pile length 2.5 m	PC.	1100 rubles
Excavation by hand	cubic meters	900 rubles
Device strip foundation section 300x600	running meters	2800 rubles
Assembling a log house from rounded logs with a diameter of up to 200 mm	cubic meters	3000 rubles
Assembling a log house from rounded logs with a diameter of more than 280 mm	cubic meters	3400 rubles
Assembling a log house from a bar	cubic meters	3000 rubles
Assembling a log house from glued beams	cubic meters	3000 rubles
Installation of floor beams with a section of 100x150	sq.m.	200 rubles
Installation of rafters with cutting of the support sole	PC.	250 rubles
Subfloor device continuous installation from the bottom of the beam	sq.m.	150 rubles
The device of the subfloor from the board step 200 mm installation from the bottom of the beam	sq.m.	65 rubles
Installation of a counter-lattice from a bar 50x50	running meters	25 rubles
Installation of the lathing from the board 25x100 with a step of 350 mm	sq.m.	50 rubles
Antiseptic treatment of lumber in 1 layer	sq.m.	20 rubles
Installation of metal tiles and accessories	sq.m.	450 rubles
Installation of ondulin / corrugated sheet / slate	sq.m.	400 rubles
Installation natural tiles and accessories	sq.m.	600 rubles
Installation shingles and accessories	sq.m.	400 rubles
Finishing work
Warming and insulation
Installation of hydro/ vapor barrier film	sq.m.	50 rubles
Gluing the seams of the vapor barrier film with adhesive tape	running meters	20 rubles
Installation of mineral wool insulation plate thickness. 50 mm	sq.m.	50 rubles
Installation of mineral wool insulation slab thickness 100 mm	sq.m	100 rubles
Sealing beam joints with foam	node	25 rubles
Finishing with clapboard /similar panels/
Installation of lining on the walls	sq.m.	250 rubles
Mounting lining on the ceiling	sq.m.	300 rubles
Siding installation	sq.m.	300 rubles
Installation of timber imitation	sq.m.	350 rubles
Block house installation	sq.m.	350 rubles
Leveling battens, pitch 630 mm	sq.m.	70 rubles
Leveling lathing device pitch 450 mm for siding	sq.m.	80 rubles
Soffit installation	running meters	400 rubles
Fascia strip installation	running meters	200 rubles
Installation of a frame partition 100 mm thick, including insulation and vapor barrier	sq.m.	400 rubles
Installation of lining from aspen / linden / abash	sq.m.	400 rubles
Shelf installation	running meters	300 rubles
Hemming overhangs with clapboard	running meters	400 rubles
Painting overhangs in 2 layers with pre-primer	sq.m.	200 rubles
Installation of soffit board up to 700 mm wide	running meters	400 rubles
Floor arrangement
Floor board installation (pine, spruce)	sq.m.	350 rubles
Floor board installation (larch)	sq.m.	450 rubles
Installation of plywood on beams	sq.m.	150 rubles
Linoleum laying	sq.m.	150 rubles
Lacquering the floor board in 2 layers with a pre-primer with a diluted varnish	sq.m.	160 rubles
Intermediate polishing of the floor during varnishing	sq.m.	40 rubles
Scraping the floorboard (grinding steps no more than 1 mm on a pine / spruce board)	sq.m.	200 rubles
Installation of plinth / fillet / layout	running meters	50 rubles
Painting the skirting board / fillet / layout in 2 layers of varnish	running meters	50 rubles
Joinery installation
Shrink knot device (casing)	running meters	350 rubles
Interior door installation	PC.	1500 rubles
Inset lock and two hinges	PC.	1500 rubles
Installation of a window block with an area of ​​​​less than 1 sq.m.	PC.	1000 rubles
Installation of a window unit with an area of ​​​​more than 1 sq.m.	sq.m.	1500 rubles
Installation of a wooden platband	running meters	70 rubles
Casing painting in 2 layers	running meters	75 rubles
Installation of a wooden extension from a planed board	running meters	90 rubles
Painting a wooden extension from a planed board in 2 layers	running meters	75 rubles
Installation of a window tide	PC.	300 rubles
Basement tide installation	running meters	100 rubles
Log house wall decoration
Caulker log house	running meters	65 rubles
Log house caulk	running meters	65 rubles
Log cabin caulking from logs	running meters	65 rubles
Decorating a log house with a hemp rope	running meters	20 rubles
Impregnation of the log house with an antiseptic b / color in 1 layer	sq.m.	20 rubles
Impregnation of the log house with a decorative antiseptic in 1 layer	sq.m.	50 rubles
Lacquering the log house with varnish in 2 layers with a preliminary primer with diluted varnish	sq.m.	160 rubles
Overcut trimming	running meters	300 rubles
Cutting a log for lining	running meters	300 rubles
Machine grinding cut	running meters	250 rubles
Grinding a log house machine	sq.m.	250 rubles
Grinding of a felling machine improved	sq.m.	450 rubles
Sanding the surface between layers of varnish	sq.m.	40 rubles
-	-	-
*Prices are indicative, because may not take into account the features of a particular object and are specified after the departure of a specialist Prices are valid from 01 January 2016

The interior decoration of the house from a bar is a continuation of the construction work on the assembly of the structure, which should be completed by this stage. This is a very responsible process, because it is the mission of giving the living space comfort and coziness according to the given design. In our article you will find useful information on this topic and find out where to start the upcoming repair.

The front of work inside the log house

Finishing the floor, walls and ceiling in a log house made of glued or profiled timber is done by hand in several stages:

1. laying of communication highways ( electrical cable, pipeline, heating system, sewerage, air conditioning);
2. impregnation of wood with antiseptic agents to protect against fire, insects, mold and fungi;
3. installation of heat and waterproofing material;
4. preparation of walls, floor and ceiling for fine finishing;
5. installation of interior doors;
6. finishing floors, walls and ceilings.

Without certain skills and the necessary knowledge for the repair of premises, it is better to turn to professionals for help, especially if we are talking about communications. If you are confident in your abilities and do not want to overpay, you can safely do the work yourself. It is advisable to decide on the design before starting and think over every detail of the interior. Such a measure will help you to have an idea of ​​the future result and calculate required amount material for this purpose.

Features of interior decoration

Finishing a log house is carried out with the same materials as in houses made of brick or any other building material, but despite this, there are a number of features that need to be considered in the process of finishing walls and other objects:

• the inevitability of primary shrinkage of houses from profiled timber, which is more significant than in other buildings. In this case, you may need at least two, and
• a maximum of six years of waiting before finishing can be started;
• secondary shrinkage, not exceeding 1% of the height of the floor, so it is practically not noticeable.

In the first case, the cause is the shrinkage of the beam and a decrease in its volume, during which the gaps between the logs narrow due to the constantly acting load. When the shrinkage of the house from the profiled timber is completed, you can find a decrease in the height of the floor by 2 - 3 cm (in houses made of glued laminated timber, this figure can be 1-2 cm, check with the manufacturer). Such deformation negatively affects the finish, as a result of which the plaster is covered with cracks, and the tile falls off the walls. To avoid a long wait, it is better to build a box of a wooden house from glued beams, and then shrinkage will last no more than 12 months. Secondary shrinkage is provoked by temperature fluctuations and wood moisture, but it does not affect decorative facing materials.

The choice of materials for the interior decoration of the log house

The choice of stylistic direction and decor depends on the personal preferences of the owners of the house or on the design development of specialists who approve the project from the owners of the home, but we will acquaint you with step by step process finishes and the most popular materials used for these purposes.

Floor device

Before laying the flooring, you need to raise the level of the subfloor with a heat and waterproofing layer, which is covered with boards. This simple and uncomplicated design perfectly retains heat and absorbs outside noise. As a fine finish for the floor most often choose:

1. Planed sheet pile lumber. This is an environmentally friendly board that is not afraid of moisture, and its structure allows the floor to "breathe". It is durable, long lasting and easy to maintain. On sale there is a wide selection of its colors and textures. Over time, the tongue and groove board can be puttyed and sanded, which allows you to update the appearance of the flooring. Such material is not suitable for those who plan to install underfloor heating, since here all the heat will be spent on heating the sheet pile.
2. Laminate or parquet board. In this case, there are no obstacles for the installation of a "warm floor". When choosing a coating with high thermal conductivity, look for the appropriate marking on its packaging. Experts also advise laying a wooden floor from the inside of a wooden house.

After installation finishing material plinths are installed that will hide the technological opening with insulation between the wall and the floor. Before nailing the plinth, the peeking insulation must be cut off, if any. To eliminate the appearance of a sound bridge, the plinth must be fixed either to the floor or to the wall. Otherwise, you may encounter extraneous noise, especially if it was not performed.

wall decoration

We remind you once again that all wooden elements in a house made of timber, both outside and inside, must be treated with an antiseptic, and this rule applies to walls in the first place. Now let's move on to the selection of materials that can serve:

• treated wood from which the structure is built. Indeed, if the surface of the walls has no defects, it can be left in its original form. The main thing that is required of you is to ensure that the timber is impregnated with a tint to obtain the desired shade.
• Dye. Staining, in addition to the decorative effect, protects the wood structure from harmful microorganisms. We advise you to purchase paint and varnish products with a low content of harmful components (their list is freely available on the Internet).
• Plaster. Can be applied to surfaces up to 12 months after completion of construction. Here, special attention is paid to the waterproofing of wooden material.
• Clapboard or block house. They are installed if the owners for some reason are not satisfied with the condition of the walls, because these materials, in fact, are an imitation of boards and logs, and if you have an excellent surface of profiled or glued laminated timber, there is no point in resorting to their help. The lining can be mounted after shrinking the box, after providing a frame for fixing the boards. Read more about.
• woody Wall panels . Produced without glue from natural raw materials, they are distinguished by excellent thermal insulation properties, easy to mount and cope with the absorption of sounds. From above, the panels can be pasted over with vinyl or textile wallpaper;
• LGK. Putty is applied to drywall, and then wallpaper is glued or applied water-based paint. Moisture-resistant material is installed in damp rooms. Environmentally friendly sheets are fixed on a frame made of wooden planks or a metal profile. Thanks to this design, the beam does not come into contact with drywall, which eliminates the appearance of cracks on it. In the resulting gap, you can hide wires and pipes, as well as lay insulation, which is why the interior decoration of the house from a bar will only benefit. Read more about.

Ceiling finish

Now it is very popular to decorate the ceiling with beams made of wood, polyurethane or polystyrene, especially if the home is decorated in Provence, country and loft styles. There are also natural beam ceilings, and not their imitation, which can be successfully used at the moment when the house is being finished from a bar with your own hands. If these stylistic options do not suit you, and you want to hide the floor supports, and the house has not given final shrinkage, it is better to give preference to tension or drywall construction, which do not interfere with the shrinkage process and are not deformed during this period.

We draw your attention to the fact that during the shrinkage period, the force in ceiling beams redistributed, so the plaster can be applied with your own hands only after it is finished, otherwise the finish will fall off.

We have provided you with the most popular finishes and introduced you to suitable materials, so now you know exactly how to decorate the interior of a house from glued or profiled timber.