What is better piece parquet or parquet board. Difference between parquet and parquet board

Structure, naturalness, environmental friendliness

Piece parquet is a plank made entirely of valuable wood species, while parquet board- a multilayer construction, the structure of which can include not only solid wood, but also high-density fiberboard (HDF board), and glue, and a varnish layer.

It is easy to guess that solid wood of valuable species is more environmentally friendly and natural than fiberboard or multi-layer construction, however, during installation block parquet in the same way it is varnished and put on glue, which partially eliminates the difference between the two coatings.

Ease of installation

Block parquet construction does not provide for a lock connection, in contrast to the parquet board, which is increasingly equipped with a “click” locking system, where the planks simply snap into place with each other on a built-in lock. Blocks of piece parquet are connected to each other on a tongue and groove connection (thorn and groove). Thus, the laying of parquet boards is much faster and easier, even a non-professional can handle it, which means that you can save a lot of time and money on floor installation.

But the features of the installation do not end there. Strip parquet not only needs to be glued to the prepared base, special tool, so it still needs to be scraped, sanded and varnished / oiled, with professional equipment and skills, while the parquet board is immediately ready for laying and does not require sanding or any other surface treatment.

Board formats, laying options

Piece parquet slabs are several times smaller in size than parquet board slats, which gives undeniable advantage in his artistic style. Parquet board can also be laid different ways: diagonally, horizontally, vertically, but the methods of its installation are significantly limited by the size of the boards.

You can even try to lay a parquet board with a herringbone:

However, all this is nothing compared to the many laying options that block parquet has:

And if we are talking about the artistic laying of parquet, then here they have not yet come up with equal pieces:

Winner in the nomination: parquet.

Chamfer, design, textures

In spite of wide opportunities design of a piece parquet, it is impossible not to note the advantages of a parquet board in this matter. For example, fashionable Lately there is no chamfer in piece parquet, while in a parquet board it performs not only practical functions (visually hides possible gaps in the process of expansion of boards with changes in humidity / climate), but also emphasizes its natural beauty, individual design.

In addition, it is the chamfer that allows for the most realistic deck laying of parquet boards or country-style design with imitation of long wide floorboards in a rustic log house, which is very difficult to achieve with only small pieces of piece parquet at hand.

But the advantages of parquet boards do not end there. varied texture, finish effects and surface structuring make this flooring stand out from many others. Piece parquet slabs, of course, have unique patterns due to the characteristics of natural wood, its sawing, but the parquet board not only does not lag behind, but also surpasses them.

Firstly, piece parquet is made mainly from oak or ash. Sometimes on the market you can also find some other types of wood growing in our area. This range fully satisfies the needs of the market. However, such a meager choice of wood species affects the textures, which are limited by the patterns of these species, which cannot be said about the parquet board. Its upper valuable layer can be the most different breeds, including rare and exotic, which makes its texture truly unique.

Secondly, not only wood species affect the appearance of the planks, but also the nature of their factory processing. Strip parquet is sold in natural massive form without any external frills or gloss. The parquet board is subjected to all kinds of processing: liming, staining, patination, retro-structuring, brushing, thermal and other processing, and therefore this flooring itself already has original design, where the buyer does not have to modify it himself, but all that remains is to choose among a huge assortment.

Winner in the nomination: parquet board.

Repair and restoration

Manufacturers often give a lifetime warranty for both piece parquet and parquet board. However, you do not need to console yourself with the hope that the top varnish or oil coating will not be erased in 50 or even 10 years of intensive use. But here restoration work comes to the rescue.

Piece parquet firmly glued to the base will easily withstand such tests, but parquet board, unfortunately, is far from always suitable for restoration. In some collections, it can be reground several times (4000 series by HARO® brand), in others (3000 series by HARO® brand) it can be reground only once during the entire period of operation.

In other cases, grinding and scraping a parquet board will not work: either the thickness of the veneer in the top layer will not allow, or the board itself will not allow, which rarely anyone glues, like parquet, to subfloor. Sanding the same piece parquet, as well as scraping or re-lacquering, can be almost indefinitely.

True, minor repairs, if necessary, can be performed on both coatings: carefully replace the damaged bar, mask small scratches using wax pencils or special restoration markers. The parquet board on the castle, in the end, can be reassembled again.

Winner in the nomination: parquet.

Coating care

Since both the parquet and the parquet board in the upper layer are natural precious wood, their care is similar. Both are afraid of excess water, both require careful handling, the use of special detergents, precautions, periodic oiling and other care procedures, which you can read more about in our article “How to care for a parquet board?”.

Category Winner: Draw.

Price

Block parquet is a little cheaper than a parquet board, but all the benefits that seem at first glance are quickly leveled, if we take into account that self-assembly it is excluded.

When calculating the costs, the price of piece parquet should be doubled or even tripled, adding to it the cost of laying the parquet. It is laid on logs or a plywood base with obligatory gluing, therefore, to the price for professional styling you should add the cost of plywood and other materials that will be required for installation. And if you have conceived an artistic styling, then an allowance for complexity will follow the amount received.

All this eventually results in a tidy sum, so you can’t call cheap piece parquet in any way.

Winner in the nomination: parquet board.

Which is better: parquet or parquet board?

As expected at the beginning, neither of these two floorings managed to take the palm and outperform the other in a combination of factors. And all because both coatings are worthy of the highest praise, just each of them has its own mission, its own purpose.

Choose a parquet board if:

your plans do not include expensive styling,
Do you need chamfered parquet or are planning a deck laying?
you would like to be able to dismantle the floor when moving and reassemble it,
you are looking for parquet from rare exotic species or with an unusual texture,
price matters to you.

Choose piece parquet if:

planning artistic styling with unusual patterns,
the prestige and status of the interior is important to you,
you need a 100% guarantee of environmental friendliness and naturalness of the product,
you want to pass on the parquet floor to your descendants,
you would like to be able to scrape and renew the parquet as needed.

Among the many floor coverings, the leading position is firmly held by coverings made of wood materials. Their range is now so wide that you can choose on the go correct option happens to be difficult. The most famous and sought after are parquet and different kinds parquet boards and boards.

The popularity of wooden floors is evidenced by the wide and varied assortment of parquet, both in terms of the types of wood used and in terms of pattern. The main advantages of wood flooring are the beauty and naturalness of the material. And, above all, this applies to parquet, which can be matched to the interior in any style. Along with the "classic" oak, parquet is also made from lighter wood species: birch, beech and pine. Currently, parquet has become very popular, made not only from coniferous and mixed forests, but also tropical (bamboo and mahogany).

The most common type of this floor covering considered piece parquet. This, in fact, is the original version of all types of typesetting parquet (panels and boards). It consists of staves (boards of hard wood), the thickness of which in most cases is 22 mm. Each riveting can have grooves around the entire perimeter. Connect such rivets without gaps on the plug-in rails. Another type of rivet is with grooves and spikes on opposite edges. To the base, both those and others are glued with the whole face. After laying, the parquet is sanded and varnished, varnished or waxed.

Solid wood parquet is resistant to wear due to its relatively large thickness. When repairing, it can be easily sanded (cycled).

Panel and mosaic parquet are advanced versions of piece parquet. Such species are small shields or packages assembled from individual narrow planks. Both types are also made of solid wood. They are distinguished by high wear resistance. They are also glued to the base with the whole face, and after laying they are covered with varnish or other protective agent.

Free-lying parquet, which is laid on the base without glue, can also be attributed to this group. If necessary, such a coating is easy to disassemble.

You can lay parquet in various patterns, which turns it into a real work of art. Such a coating is called artistic parquet. This installation allows you to combine different types of wood (oak, maple, ash and others). This parquet is one of the most expensive types of flooring, as its installation is accompanied by lengthy manual work.

In principle, any parquet can be laid on any floor, but there are situations when this type of coating should be used. For example, when installing underfloor heating, you need as thin parquet as possible, which to a lesser extent prevents the spread of heat in the room. Its thickness should not exceed 14 mm. In another case, thick parquet cannot be laid due to low door panels, because otherwise the doors will cling to the floor.

Of course, parquet is considered an expensive pleasure, but it goes well with other floor coverings. Magnificent mixed floor coverings are possible even within the same room. It is advisable to combine the parquet floor in the living room with the carpet. Other combinations are possible, in particular, parquet - stone, parquet - ceramic tile and others.

Along with parquet, massive parquet boards are also widely used. Coatings from such boards are outwardly similar to traditional ones. plank floors, which were laid from long, tightly knit boards, nailed to them. Modern parquet boards are connected into a groove and a comb, and they are hidden to the base.

Massive parquet boards are made both from hardwood (oak, ash, maple, cherry and walnut) and from soft coniferous wood (pine, spruce, fir and larch). Softwood boards are covered with azure, wax, and they can also be stained with stain. On sale there are already finished parquet boards.

Parquet and solid parquet board are not cheap building material. But an alternative still exists - a three-layer, more affordable parquet board. Its base is coniferous wood. In their structure, such coatings resemble plywood and consist of several mutually perpendicular layers, and have a groove and a ridge along the perimeter. This design makes them resistant to changes in humidity and temperature.

When laying parquet three-layer boards are glued together only. On the base (black floor), they lie freely, so that the floor covering consists, as it were, of their separate “floating” shields. Hence the definition - "floating floors" appeared.

With the help of parquet and parquet boards, you can create an atmosphere of warmth and comfort in your room, and outwardly the floor may look different depending on the type of wood and the type of coating itself. So, for example, elegant maple mosaic parquet looks completely different from parquet flooring made from the same material, but both options are spectacular in their own way. In any case, the choice is yours and no matter what decision you make, with the help of parquet or parquet board you will give your home a refined and noble look. A source

Despite the similar name, parquet and parquet board, the difference between which is visible to the naked eye, have a number of significant differences. First of all, this design features elements. A parquet board is a three-layer material, in which the fibers of each of the layers are perpendicular to the previous one, and face layer made from more expensive wood. Parquet is often made in the form of a solid bar of oak, maple, beech, ash, cherry, pear and other valuable species. It is the design of the slats that affects their characteristics.

The thickness of strip parquet slabs is about 7 mm, with a width of 3-8 cm and a length of up to 40 cm. Block parquet flooring is an expensive option with a long service life and unsurpassed aesthetic appeal. For the manufacture of dies, valuable wood is used (ash, wenge, oak, maple and others) and their combinations to create multi-colored patterns and ornaments. The uniqueness of the coating lies in the fact that its appearance is formed by the individual natural shade and texture of each individual plate.

One of the most popular ways of laying piece parquet is the herringbone pattern. With it, you can visually increase the floor area and make the room more spacious.

Parquet has the following advantages:

Durability due to the use of hardwood for its manufacture.
Aesthetic appearance, which provides a unique natural pattern.
A simple repair of the coating without disassembling it.
An unlimited number of surface scraping processes to update it.
Environmental friendliness.
Strength and resistance to mechanical stress.
Heat capacity – parquet flooring is always warm to the touch.
High soundproof qualities.

Disadvantages: high price, complex installation and the need to maintain a special microclimate - the coating is not resistant to moisture and dry air.

Laying parquet - features of the technological process

Table 1. Laying strip parquet: preparatory measures

Illustration	Description
	The leveled base is cleaned of dust and dirt.
	With the help of a primer, the surface of the base is dedusted.
	Produce the layout of plywood sheets.
	Cutting plywood sheets is carried out using a jigsaw.
	A special adhesive composition.
	Lay plywood sheets.
	Drill holes, insert dowels and screws.
	Self-tapping screws are screwed in, sinking the cap a few millimeters into the body of the plywood sheet. With the help of a vacuum cleaner, the resulting plywood flooring is removed construction dust and using a level, check the evenness of the resulting base. In the presence of irregularities, the base is ground.

Table 2. Laying parquet

Illustration	Description
	Before laying the parquet, trimming is performed required amount dice.
	Perform floor markings.
	Mark the first square.
	A two-component adhesive composition is applied to plywood. It is recommended to knead the glue in small portions, since its pot life is no more than 1.5 hours.
	Liquid nails are applied to the ends of the dies.
	For a snug fit, the dies are adjusted by tapping with a hammer through an auxiliary bar.
	After laying the parquet, a technical break of 3 days is required in order for the coating to displace all the moisture from the adhesive. After 3 days, the coating is polished using a drum machine, removing all the differences that have arisen during the installation process. IN hard-to-reach places use a grinder.
	If parquet of three colors is used, then it is puttied with three shades of putty.
	After the putty has dried, a three-disc grinder is used.
	After that, the floor is completely puttied with a special putty mass.
	Re-grinding with a finer abrasive.
	The surface is cleaned with a vacuum cleaner.
	Using a spatula, a special primer is applied.
	Perform polishing.
	A day later, the parquet is covered with a two-component varnish. The wood will raise the pile, so before re-lacquering, the parquet must be sanded.
	When applying the final coat of varnish in the room, it is necessary to create a sterile atmosphere and wear clean clothes.

Prices for Tarkett parquet

parquet tarkett

Parquet board and its features

This is a three-layer material, where upper layer, made of solid wood coated with varnish, oil or wax, plays a decorative role and forms the appearance of the floor covering. The middle layer (waterproofing) is designed to protect the coating from moisture - it is made of resinous wood veneer. For the base - the third layer, spruce or pine plywood is used.

The length of the parquet board can reach 2.5 m with an average width of 15 cm, which allows you to produce quick installation. Docking of lamellas occurs due to the presence of grooves and ridges at the ends of the planks. You can choose the shade of the parquet board yourself by treating it with stain, oil, wax or varnish, which will emphasize the texture of the wood and make the natural shade more expressive.

The parquet board has the following advantages:

Simple laying due to the presence of a thorn-groove system at the ends. The coating after laying does not require scraping and its additional processing.
Environmentally friendly, due to the presence of natural wood fibers in the composition.
Easy dismantling for repair work.
Resistance to changing microclimatic conditions in the room.
A wide range of shades and textures.
Affordable cost.

Of the shortcomings note:

Low resistance to mechanical influences.
Limited number of cycles of surface scraping, as finishing layer is 4 mm.
Low moisture resistance, which can be improved with special processing during the coating process.

How to choose a parquet board for an apartment? In order to make an informed decision, you should briefly familiarize yourself with the criteria for evaluating parquet boards, production technology and the influence of these factors on characteristics. will help you with this!

Table 3. The process of laying parquet boards

Illustration	Description
	The parquet board, without opening the package, is left in the room where laying is to be done for 48 hours at a temperature of 15-22 degrees and a humidity of 45-65%.
	In the presence of damage to the screed, produce jointing and sealing cracks.
	The base is cleaned of contaminants.
	After opening the package, the parquet board is checked for defects.
	When laying the substrate, its edge is brought to the wall.
	To lay the first row of lamellas, the lock part facing the wall is cut off with a jigsaw.
	To fit the lamellas, a special bar is used, which is tapped with a hammer. A gap is left between the wall and the first row of boards, putting down special wedges.
	If necessary, a jigsaw is used to trim the planks.
	The lamella is placed with a spike in the groove of the previously laid board, and then, slightly pressing down, it snaps into place on the end.
	For covering approx. front door, the box is sawn to the height of the board.
	The sawn fragment of the box is removed and a lamella is pushed in its place.
	To design the transition between coatings and rooms, a special threshold is used to match the coating.
	At the final stage, the wedges are removed from the gaps along the walls and the skirting boards are fixed.

Prices for Polarwood parquet board

Polarwood parquet board

Comparison of characteristics of parquet and parquet board

There are a number of criteria that allow you to analyze the properties and characteristics of these two materials in order to come to a conclusion - which one is better.

Composition

Piece parquet planks are made from solid wood of valuable species, and in the multilayer construction of parquet boards, valuable species of wood is used only for the manufacture of the front decorative layer. In addition, other materials are included in the parquet board - the array can be replaced HDF board, there is varnish and glue.

It can be seen from this that the parquet, consisting exclusively of solid wood has maximum naturalness and environmental friendliness than a multilayer board. But in fairness, it is worth noting that glue and varnish are also used in the process of laying parquet, which automatically equalizes the naturalness of materials.

Mounting

The structure of the lamellas determines the specifics of their installation. The parquet board is equipped with a locking system, as a result of which the laying process can be compared with - the coating is mounted on the substrate "dry". Some parquet boards lock system do not have, others are equipped with a “thorn-groove” system, but in any case they are fastened using an adhesive solution.

Initially, laying differences begin with the preparation of the subfloor - if the parquet board can be laid on a substrate laid directly on concrete base, then plywood flooring is installed for laying parquet.

If we talk about the complexity of the process, then even a person who does not have special building skills can lay a parquet board. Board with protective layer does not require additional processing. With parquet, things are more complicated. Its installation should be carried out by a person with specific skills and experience. In addition to fixing the dies, the coating requires repeated processing - sanding, grinding, primer and varnish. This will require professional expensive equipment.

Styling options

The materials also differ significantly in the way they are laid. The parquet boards have small size, so there are a great many schemes for their installation. In addition, using plates different sizes and shade on the floor, you can create a fancy pattern or ornament.

Artistic parquet, the details of which are cut to order, in accordance with the design sketch, belongs to the category of elite and very expensive floor coverings that amaze with their unique beauty. No other modern flooring material has surpassed such a coating in terms of decorativeness.

Such a feature of parquet is laying in accordance with various schemes, allows you to influence the visual geometric parameters of the room - to make it narrower or wider, more spacious or more compact.

With a parquet board, everything is simpler - you can lay it along, across or diagonally in a room - this is due to the size of the planks.

But unlike parquet, the board can be fixed on any surface - including on the wall and on the ceiling. Now it's fashion trend in modern interiors.

Appearance

The design possibilities of parquet are not limited, but it cannot be argued that a parquet board is not capable of surprising with its appearance. For example, parquet slabs are not equipped with chamfer, which has been popular lately. For a parquet board, this element is important not only functionally - when the wood expands, the cracks that may appear become less noticeable. The chamfer is able to emphasize the individuality of the lamella design and its natural beauty.

The advantage of a parquet board, which makes it stand out among many floor coverings, lies in the variety of its textures, shades and visual effects of the flooring. This feature allows you to push the parquet board to the fore, in comparison with parquet slabs, which, although they have a unique natural pattern, sometimes require additional processing to emphasize it.

In addition, oak or ash is more often used for the manufacture of parquet slabs, which significantly reduces the variability of their appearance. While for the manufacture of the front layer of the parquet board, not only valuable wood species are used, but also quite rare specimens.

Another nuance is that piece parquet goes on sale in the form of a blank, which is subsequently subject to processing after laying. The parquet board already comes from the factory to ready-made, and the buyer can imagine what the floor in his house will be like.

maintainability

Both of these coatings have a long service life, but over time, to one degree or another, the front surface loses its original appearance and needs updating. In this case, the coating is restored.

Advice! If the parquet board is damaged, it can be easily replaced with a new one. Therefore, lamellas after laying the floor in a certain amount should remain in reserve.

First of all, restoration is understood as polishing the coating. Since the piece parquet is securely fixed to the base and is made of solid wood, it can be scraped as many times as you like. With a parquet board, the situation is more complicated - its front layer is thin, so the number of grinding cycles is possible from several times to one, depending on the manufacturer.

In addition, sanding a parquet board in some cases is impossible due to the unacceptably small thickness of the front layer and the laying method without adhesive composition.

Care

Compared to other floor coverings - laminate, tile, linoleum, parquet and parquet boards are more whimsical to care for. This is mainly due to their instability to moisture. Therefore, special detergents are required to care for them. When washing the floor, it is not recommended to moisten the cloth with plenty of water.

Before you start washing the varnished parquet, it is necessary to remove abrasive contaminants from its surface with a vacuum cleaner, otherwise the protective layer may be scratched.

Video - Parquet care will tell

What to choose?

Given that the cost of piece parquet is several times higher than the cost of a board of the same name, and also because the laying is done by hired workers, it is necessary to weigh the pros and cons before deciding to purchase this material, unique in its beauty, but capricious in care. for the floor.

The purchase of parquet is justified in the following cases:

If you plan to lay an artistic installation of a unique and one-of-a-kind coating with an individually designed pattern.
To focus on the prestige and status of the premises.
When there is a desire to purchase an environmentally friendly and 100% natural material.
When the goal is to create a floor covering with the longest possible service life.
When there is a desire to be able to update the coating, giving it the desired shade with the help of special formulations.

The parquet board is chosen in the following cases:

If there is no purpose and opportunity to spend a large amount on the installation of flooring.
If you are going to do the work yourself.
If there is a need to manufacture a collapsible coating, which can be quickly dismantled or a separate fragment can be replaced.
If there is a desire to get a floor covering from a rare breed of wood.

Barlinek parquet board prices

Barlinek parquet board

Video - What are the differences between parquet and parquet board

The floor covering must meet many requirements: aesthetics, environmental friendliness, maintainability. In this case, the dilemma is what better parquet a board or a massive board is a frequent occurrence. Both materials are beautiful, durable and clean. The article gives an assessment by experts, on the basis of which you can make the final choice

The floor covering must meet many requirements: aesthetics, environmental friendliness, maintainability. In this case, the dilemma - which is better parquet board or solid board - is a common occurrence. Both materials are beautiful, durable and clean. Below is an assessment by experts, on the basis of which you can make the final choice.

Features of parquet

A parquet class board is a multilayer unit. All stabilizing and decorative layers are glued together. Top coat - lacquer, oil, wax. Read more in the article "What is a parquet board".

The advantages of the material are as follows:

Strength. Due to the layers laid perpendicular to each other, linear expansions, pressure and climate differences act on the parquet to a lesser extent.
Affordable do-it-yourself styling methods. Boards can have thorn-groove locking joints. With them, a floating floor is created, which, if necessary, can be dismantled without damage.
The beauty. The natural pattern of noble breeds is emphasized by a matte or glossy composition that emphasizes or sets off natural colors. Artistic options are worthy of reception halls.

With proper care, the restoration of parquet occurs with minimal changes - in its original form it will last a long time.

Consider the disadvantages to decide what better array or parquet board:

Parquet is environmentally friendly, since the layers are natural wood. But glue cannot meet this condition. In addition to it, a mounting compound is also used for adhesion to the floor. Therefore, it is important to always be aware of the chemical constituents of parquet boards.
The service life of parquet is 1.5 times lower than that of solid wood.

Parquet remains at the peak of popularity among other noteworthy floor coverings. If you use the raw materials wisely: choose the optimal installation option, provide timely care, carry out preventive maintenance, the floor will delight with its magnificence for a long time.

Solid wood features

The material is whole piece wood without delaminations and inclusions of synthetic raw materials - in detail "What is a massive board".

Advantages:

Complete ecology.
Strength. Due to the thickness, the service life of the board reaches 70 years. In addition, timely procedures - scraping, grinding - prolong the original appearance of the natural flooring.
Heat capacity. Solid wood floors do not need warm systems.

disadvantages

Which is better: parquet board or solid wood?

To determine the choice of flooring, it is important to consider the behavior of the boards in real use. Many factors matter: the material for building a house, traffic activity, the willingness to care for the floor in accordance with the rules, and so on. Let's start:

Stability

The concept defines the original appearance of the coating over time. The massive board wins. It has great thickness and weight. Therefore, it will successfully withstand changing loads. Squeaks and shifts in the array occur later - in the parquet board, the problem can begin immediately after laying, if the work is carried out without proper control.

The appearance of the parquet is preserved with special care.

Solid wood board is undemanding to detergents, but similarly does not accept excess moisture. Over time, massive wooden floors are painted. It is not recommended to do this with parquet - scraping, grinding and other manipulations are required.

It is not forbidden to lay parquet in apartments, but for this it is important to choose the right room without aggressive environments. The parquet board does not spread in nurseries - constant activity and the risk of spilling something or dropping it is high. Her prerogative is living rooms, halls, offices. The array is unpretentious only if a certain breed is selected. For example, larch is successfully placed in bathrooms and baths, where it is absolutely inert to moisture.

True, these varieties are high in cost. The rest of the wood suffers from longitudinal cracks - parquet does not have such a feature.

The building material of the house will also affect the wood floors. Bricks and stones can create dampness inside, which is detrimental to wood. The array will be the first to be hit, the parquet is more stable. Both coatings require moisture control.

maintainability

Due to the thickness, it is possible to scrape the massif 7-8 times. However, massive floor problems are more common due to the structure of the board - longitudinal cracks, large gaps. To replace the floorboard, you will have to open the adjacent boards to the wall, otherwise the looseness will not disappear.

Over time, solid wood floors are painted, as cracks have to be puttied

Parquet requires careful handling, its thickness allows for the scraping procedure 3-5 times. Sand, heels, animal claws can ruin the coating. Type-setting or art parquets are restored only by professionals. Easy styling will allow you to make repairs yourself without dismantling the entire coating, while maintaining the appearance of the floor.

Price

Definitely, it is impossible to name the difference between a parquet board and a massive board in terms of price. The cost depends on many factors: the type and type of wood, the method of laying, the number of boards, related materials - their purchase is necessary. It is necessary to take into account the price of work - a parquet board, as well as an array, is difficult to lay correctly. It is important to focus on the quality of the material.

conclusions

So, what is the difference between a massive board and a parquet board? Many. What to prefer? According to the purpose and finances. Is an array definitely better? Only for some of the indicators described. Superiority in practicality is given to solid wood, leadership in aesthetics is occupied by parquet. You decide.

If you find an error, please highlight a piece of text and click Ctrl+Enter.

It should be noted very important fact, which is an indisputable element when choosing a parquet or parquet board. You need to understand very well that the parquet itself can serve for your home many times longer than the parquet board due to the layer of wood. The thickness of pure wood parquet is ~ 18-22 mm. The pure part of the parquet board wood is at least three times smaller.

But there is another side to the choice of parquet or parquet board - this is the price and quality. If you decide to purchase parquet, you certainly need to understand that the parquet must be of high quality and not bevelled. If we try to sum up the entire stage of laying parquet (the cost of parquet, the cost of laying, the cost of scraping, the cost of high-quality wear-resistant chemicals for parquet, the deadlines), we will get an amount three times higher than the cost of a parquet board.

If you want to get high-quality, fast and at the same time inexpensive option floor of natural wood- parquet board is perfect solution for your home.

Parquet and parquet board have only one thing in common - both types of flooring are made of natural wood. But it's absolutely different types floor coverings.

The parquet board is a structure consisting of three layers. The lower one is a stabilizing layer of coniferous wood. Middle - bearing layer of coniferous wood. Upper - decorative layer from precious woods. The total thickness of the parquet board is 14 mm, while the thickness of the top layer does not exceed 4 mm. The laid parquet board imitates either piece parquet or solid board. The parquet board has a factory varnish or oil protective and decorative coating. For high-quality laying, the boards are joined together using a locking connection. Laying is possible both in a floating way (on the substrate) and in the way of gluing to the base.

Parquet flooring is characterized by fast laying speed and low cost of work. The parquet board can be further sanded and varnished 4 to 5 times if the parquet board is glued to the base.

On average, the service life of a parquet board is 20-25 years, subject to the rules of operation and updating varnish coating every 4-5 years. Parquet differs from parquet boards in that it consists entirely of solid wood and is not a finished product. The thickness of the bar can be 15 and 22 mm (the useful layer can be 7 and 12 mm, respectively). After the parquet is laid, it is sanded and varnished. Thus, the parquet has advantages over the parquet board. The average service life of a piece parquet flooring is 50 years.