Methods of heat-free insulation of walls in the apartment, the choice and technology. What materials are suitable for heat and sound insulation of walls in the apartment Mineral Plates Shumanet
- Work is now popular, performed in almost every home and apartment. Heat began to take care of everything, because it is a serious savings of the family budget, and excessive noise adds stress to our already intensive life. The house should be a place where you have the opportunity to relax, so similar technologies have become so popular.
First we will deal with the materials, firstly, mainly thermal insulation materials rarely boast also noise insulating properties, from the most affordable and popular three - wool (eco, glass and mineral), cork sheets and isol. Polyfoam and Painopropylene Poorly isolate sound, and lining under wallpaper or special mixtures that can remove outsider noise, do not give heat. You can either use one of the listed options, or build a design from a combination of heat and noise insulators.
In order to finally convince you of the resonance of choosing one of the three proposed options, we will look at charms and disadvantages, the features of the installation of each of the listed materials.
Crescent Materials: Glasswater, Equata, Mineral Wool
Cookat materials are practically identical in characteristics and therefore we will analyze them on the example of mineral wool.
Mounting mineral wool
Mineral wool possesses:
- Low thermal conductivity.
- Not exposure to fire.
- Strength in compression, mechanical impacts, breaks.
- High soundproofing characteristics.
- Resistant to temperature deformation.
- Biological and chemical resistance.
- Easy and simplicity in installation.
Mineral wool is available in both sheets and rolls, has a different thickness and softness. Instructions for mounting structures using mineral wool extremely simple:
- It is necessary to close the walls of the steamer, hydrobarier with a stapler, assemble a frame of special metal profiles, holding a step in 50 centimeters (cell 50 * 50).
- Thoroughly invest in the resulting space mineral wool, following the unaware space.
- Fix in any convenient way.
- Close the design of plasterboard sheets, plastic panels, clapboard, fiberboard.
The basis for walls is ready. You can start the finish, its view depends on which material you have been selected. Before hiking a similar option, keep in mind that the thickness of the design "steals" from your room has several tens of centimeters. If noise isolation is the primary cause of repair alterations, then before proceeding to the installation of the design, inspect the walls, the floor, the ceiling for cracks, cracks, recesses, through which extraneous noises can penetrate and close them. In principle, the technology allows you to do everything with your own hands and do not overpay those who perform this kind of work, so it is not financially expensive.
Cork cover for walls
Cork coatings
Cork coating also has many advantages:
- It is waterproof.
- Fireproof.
- Sustainably for deformations and pressure.
- Not collecting dust, little polluted.
- Wonderful isolates extraneous noise and retains heat.
- Not subject to the appearance of fungus and mold.
- Hypoallery.
By minuses include:
- Most material value.
- Little stability of the protective coating.
- Traces from heavy furniture, technology.
The cork coating can appear in front of the consumer in various types:
- Tiles from cork crumb.
- Rolls from traffic jam.
- Wallpaper from cork crumbs.
- "Liquid" cork.
- Technical cork coverage for other types of finishes.
Installation of the plug in any kind of its form - the process is not complicated, but quite painting. Its glue to a special acrylic or contact composition. The contact glue has a two-way principle of application, that is, it is also applied to the wall and on the material, ensures reliability and strength of the fastening, the second fastening option implies that glue will only be applied to the material. Builders prefer contact adhesive compositions.
With double-sided gluing, it is necessary to ensure that air bubbles do not fall under the material, and the glue is evenly distributed over the entire surface. Before glued, you need to wait for some time for the best hitch of materials. Before the gluing stage, the cork should acclimatize indoors, for this should pass for at least a day. Walls and rooms where work will be carried out, also need preparation. The room temperature should not be below 19 degrees Celsius, and relative humidity - fluctuate in the range of 35-65 percent. The walls should be dry and smooth, their limiting humidity - 3%.
If you are not sure about these indicators, then you spend the appropriate work - align or dry them. When installing cork coatings, it is unacceptable to use materials containing plaster. The plug is glued almost the same as the tile, with the difference that the seams here must be minimal, and the materials are put into the joint. If the coating with the pattern, then decompose the combination on the floor before gluing on the wall and stick to the sequence that you have chosen.
Isolon
Undoubted pluses of this material:
It can be used as glued, and to attach with a stapler, and the seams between the sheets thoroughly stick to a special tape. It is possible to produce heat and noise insulation, both from the inside of the building and outside. What the heat-insulation of the walls in the apartment is better - choose yourself.
Outdoor heat woolly insulation of walls
Tips of Masters are almost united - you need to choose this particular view for insulation (if it is the main task), because it is not easier to enable the cold to enter the wall of the premises than to fight with the consequences of its freezing. There is a certain algorithm of actions, which is applicable to heat and sound insulation outside the house.
Frame for heat woolly insulation
- Walls must first be prepared. The base should be dry, clean, durable. If we are talking about the work of the work for which the framework is needed or the lamp before it is to construct, it is necessary to take care of vaporizolation so that the materials are not exposed to moisture. This is especially true for working with cotton heat woolly insulators, since one of the minuses of the latter is, just, and the fear of moisture. Under its influence, cotton wool lose their properties, and the work will not bring the proper effect. If you want to work with adhesives, you need to dry out the wall. It is not recommended to carry out similar outdoor work in the autumn - spring period, when the humidity is increased, it is better to choose a summer day on the sunny week, then your walls are dry on their own, naturally without your help.
- Placement of heat and mechanical insulator. Fixed material stands in the manner specified in the technology above - either sticking (attaching with a stapler) or placing under the frame (formwork). Close the insulator is made by special materials for facade works. It can be slabs, siding or so on.
If you do not have the opportunity to spend in the apartment outside, you can resort to inner installation. The technologies of insulation and sound insulation have already been given by us in this article.
Polyfoam or Painropyne? Is it worth it?
If sound insulation is not fundamental, and financial opportunities are not enough for large-scale insulation work, we can offer an option suitable for private houses or apartments, where it is mostly concerned about the external noise (from the street). This is the installation of foam or polystropal plates. Due to its porosity, they absorb some noise, although their indicators are significantly lagging behind the mineral wool, isolon or traffic jams. Of course, you can also hold an internal finish with the help of these sheets, but some specialists are concerned about their toxicity, so we do not recommend risking.
Installation of such sheets is very simple - they are glued on special mixtures, fix the so-called fungi, plastering and painted. The density and thickness of the material are different and you can easily select the desired option for yourself.
Whatever your choice of heat-cheap insulation, its placement location, I would very much like everything to do, and your job brought you joy and satisfaction.
Why are ISOVER materials choose millions of people to insulate their homes, soundproofing apartments, creating a comfortable microclimate in the premises of residential complexes, shopping and business centers, for the construction of energy efficient buildings?
Already 80 years in more than 30 countries of the world are issued by ISOVER materials for effective insulation and noise insulation in accordance with world quality standards and strict requirements for the safety of building materials. During this time, ISOVER earned the status of an expert in the field of insulation and sound insulation of any types of buildings and structures.
|
In Russia, Isover is the only manufacturer of mineral wool both from quartz and from basalt, ready to offer the most effective solution for any type of construction. Knowing everything from the product development phase, to the production and operation of heat and noise insulation, ISOVER experts help to create a healthy microclimate in the premises and save on heating. Isover materials are used in homes with a class of energy saving from B to a +. The use of a quartz insulation based on quartz allows you to save at home to 67%, and a quartz sound insulation based on quartz reduces the level of air noise by 54 dB (compared to the blow of the elevator doors), which allows you to protect against noise in the next room. Mineral Wat Isover occupies a leading position in the heat-insulating materials market. A wide range allows you to choose products for both highly specialized tasks and to solve comprehensive problems of sound and thermal insulation. Materials have successfully proven themselves among the private sector and the design segment, and the quality, durability and safety and sound insulation safety IsOver is verified and confirmed by the relevant certificates of authoritative and independent research institutes.ISOVER The first and today is the only manufacturer of mineral wool in Russia, which was certified for compliance with GOST 32314. All documents are presented in open access on the site. [i] * The calculation was made by the Institute of Passive House (IPD) for an individual residential building in Moscow with a heated area of \u200b\u200b160.37 m2 and insulation with a thickness of 100 mm. |
|---|
Mineral Quartz-based insulation
ISOVER mineral wool is made using Tel technology from high-quality quartz melt, which is confirmed by the relevant certificates and conclusions of expert organizations. Mineral insulation based on quartz is durable, environmentally friendly and refers to a group of non-combustible materials.
ProductsIsover Based on quartz, it is made according to modern technologies at the factory in Egoryevsk - one of the largest ISOVER enterprises in the world, producing more than 70,000 tons of heat and sound insulation per year. This is the only enterprise in our country, which has a crying technology and can produce quartz products with high mechanical strength.
Mineral insulation and soundproofing Isover based on quartz can be divided into lightweight and hard stamps. The advantages of light grades are elasticity, light weight, dense adjacent to the surface, convenience in their montage. Light stamps are produced in the form of rolls and plates that are compressed in a pack of 4 - 6 times. This gives substantial savings during the transportation and storage of the material. After removal of packaging, the mineral wool restores the initial volumes in a few minutes and it can be insulated with walls, floors, roofs, attic, overlap or ensuring noise insulation in partitions.
Hard brands of mineral wool based on quartz in Russia today can only issue IsOVER. We are talking about mineral wool for structures intended to withstand a certain load, such as: plaster facades, flat roofs, soundproofing floors. To do this, in production, with the help of special equipment, the fibers of the material are redirected, giving the heat insulating plates the necessary strength characteristics. The advantages of hard brands of ISOVER based on quartz are smaller weight and increased heat insulation speed compared with basalt-based mineral wool slabs.
Mineral insulation based on basalt
Mineral insulationISOVER based on basalt It is made of rock melts. The material has a wide scope of use, ranging from the heat and sound insulation of the premises, ending with the use of refractory structures or even agriculture. Mineral wool based on basalt fiber is fire-resistant decision resistant to mechanical exposure and temperature deformations.Benefits
Mineral wool has a number of competitive advantages, thanks to which for a long time is the first choice of consumers. Among the most important characteristics of ISOVER mineral wool:- effective level of heat protection;
- high-quality sound insulation;
- refers to the group of non-combustible materials (the production of rock and quartz melt is used);
- vapor permeability (allows the walls to "breathe");
- durability;
- moisture resistance (has hydrophibized impregnation);
- environmental friendliness (safe for human health and the environment);
- low weight - for light grades;
- excellent resistance to mechanical effects - for rigid marks;
- convenience of mounting.
Application area
Isover materials cover vertical, horizontal and inclined structures requiring insulation and sound insulation. In the product portfolio, there are both universal materials suitable for complex warming of walls, roofs, floors in one product and solutions designed for each individual design.- Facades with outdoor plastering layers
Actual solution for multi-storey, cottage and private house-building. The popularity of this insulation system is due to high heat engineering homogeneity due to the absence of "cold bridges".
For facades with a thin plastering layer Thermal insulation material is needed, which in addition to thermal protection should perform the function of the carrier base for plastering layers. Choose products with high mechanical strength. Among the insulation isover, we recommend an innovative solution from mineral wool - IsOVER plastering (for a multi-storey segment) or Isover Facade Light (for low-rise construction). For those who are used to work with only stone cotton, the ISOVER facade-master (for cottage and low-rise construction) and isover facade or ISOVER facade plus (for design development) are created.
Facade insulation system with thick plastering The layer has a thickness of the base layer more than 20mm with movable fastening with special elements (grid and anchor) to the walls of the building. In such a design, the insulation performs the function of heat protection and must have a minimal thermal conductivity coefficient. For this type, the material is well established based on the mineral wool ISOVER OL-E.
The choice of effective material and the observance of six steps for competent warming of the plaster facade will help provide in rooms a comfortable temperature and durability of the appearance of the building. Video instructions for insulation of the plaster facade from ISOVER experts on the example of one of the objects in Krasnodar.
- Ventilated facades
If necessary, to carry out construction work, regardless of the time of year and implement a variety of architectural ideas, preference is given to the system of hinged ventilated facades using mineral wool insulation. For a single layer insulation systemWalked in the reconstruction of facades or construction in the regions with a warm climate, we recommend using mineral wool based on Quartz ISOVER Ventfasad Mono or Isover Ventfasad Optima, and based on basalt or stone fiber - ISOVER V. As a single-layer thermal insulation, as part of the facade systems with an air gap on balconies and houselogs, the use of the ISOVER material Ventfasad-bottom Light is allowed.
Two-layer insulation system It can consist entirely of stone wool, for example, the bottom layer - ISOVER Light or Isover optimal, the top layer is an ISOVER or ISOVER optimal. A variant of the two-layer solution and mineral wool based on quartz (ISOVER Ventfasad Top and Isover Ventfasad Nuclear Light or Isover Ventfasad-bottom Light) and Combining Minvati with basalt insulation, for example, Isover Ventfasad bottom and ISOVER V.
- Flat roofs
Thermal insulation for a flat roof must comply with strict requirements: ensure efficient heat and noise insulation, high fire resistance and durability of the roof design, maintain the initial thickness and strength at maximum load.
These requirements are responsible isOver materials for a single-layer insulation system- ISOVER OL-P (based on quartz), ISOVER RUF (based on stone fiber) and for a two-layer system. The choice is wider here - Materials made of mineral wool Isover OL-PE and Isover Ol-Top, from Stone Wool Isover Ruf in, Isover Ruf N, Isover Ruf to Optimal, Isover Ruf n Optimal.
Video instructions for competent insulation of the design of flat roofs from ISOVER experts can be viewed.
- Scanty roofs
For efficient heat and sound insulation of the pitched roof, a special product with reduced water absorption is developed - ISOVER warm roof. For those who prefer basalt bag, we advise you to apply Isover Warm Roofs Master or Isover Optimal.
- Frame walls
For reliable insulation and noise insulation of walls during construction or repair of the house, cottages or apartments, we recommend ISOVER material warm walls based on quartz or IsOVER master of warm walls based on basalt.
For frame house-building in the Isover project segment offers a series of ISOVER Frame Products. They are produced in mats and plates with different levels of heat shields.
For individual construction and insulation of the whole house, a special ISOVER product is developed by a single material based on basalt.
- Partitions
Modern partitions made of rigid facing materials and soft fillers from mineral wool today became an excellent alternative to massive walls to protect against noise. Mineral wool in such a design absorbs a significant part of sound energy, transforming it into thermal. Stone wool ISOVER acoustic can be achieved to achieve the maximum effect as an insulation based on mineral wool ISOVER recording or Isover a quiet home.
- Floors
Soundproofing floor may not be loaded - lagham, (For this case, ISOver materials have been developed for a quiet home for private house-building and ISOVER frame-M40 for multi-storey construction) and loaded - the "floating floor" device. In the second case, it is possible to protect against shock noise. To solve this problem, we recommend stone wool for the floor of Isover Flor and Mineral Wat Iover Floor.
A professional solution for protection against air noise in all types of designs for home and apartments will provide a mineral insulation based on basalt ISOVER master of acoustics.
Where can one buy?
Heat and sound insulation IsOnder is sold in 77 regions of the Russian FederationStarting from millionic cities and ending in small settlements. A wide selection of materials is available for purchase of both online and retail points, for wholesale buyers, a wide range of distributors in Moscow and the Moscow region, St. Petersburg, in the Urals in Yekaterinburg and the Sverdlovsk region, in the south in Krasnodar and the Krasnodar Territory, Rostov On the Don and the region, the Republic of Crimea, in the Siberian Federal District: Novosibirsk, Novosibirsk Region, Krasnoyarsk and the Krasnoyarsk Territory, in Nizhny Novgorod and the Nizhny Novgorod region and other cities of Russia.To date, residents of 38 cities in Russia can significantly save time on the selection and purchase of insulation and noise insulation. Convenient online service reflects only available products, it allows you to quickly find the most favorable offer for the price of heat and sound insulation and immediately buy selected materials. ISOVER MARKET can also be obtained to obtain a quality guarantee from Isover, buy insulation or soundproofing on the site on the site and shipping products from the warehouse of official distributors where storage conditions are strictly observed.
Get acquainted with the company's assortment and choose the necessary product you can with the help of our detailed.
Thermal insulation materials are used to insulate houses and apartments. With the help of them, you can reduce cash spending. In addition, they allow you to improve the soundproofing of walls, gender or ceiling. For insulation and noise insulation of houses and apartments, materials such as expanded polystyrene foam, minorvat, polyurethane foam and traffic jam are most often used.
Polyfoam is a porous and light insulation. It is made of polystyrene by foaming. It is considered one of the best (at low cost) in relation to other thermal insulation materials. It is made in the form of plates of different sizes, density and thickness. It has good thermal insulation characteristics, as it consists of tightly connected hermetic balls filled with air or gas.
Advantages of foamed polystyrene:
- low thermal conductivity coefficient - 0.035 W / m · K;
- ecologicaly clean;
- does not miss the wet air;
- it is capable of listening to decades;
- not subject to rotting;
- windproof.
Polyfoam is easy to install one person, as it has a small weight. Used both inside the residential premises - walls, ceiling, floor, and outside. They are separated by different surfaces: wooden, brick, concrete and others.
It is not used as sound insulation, as it has weak noise insulating properties.
Extruded expanded polystyrene foam
Externally, extrusion polystyrene foam is similar to the usual foam, but has a greater density and less thickness. With its production, an extruder is used. Due to this, the extruded foam polystyrene has closed cells of the same sizes.
Due to the high density, the extrusion is used in the construction of railway and highways, as well as take-off stripes. This material has excellent strength, so it can be used not only as thermal insulation, but also as auxiliary or carrying design.
Positive qualities of extrusion polystyrene foam:
- does not absorb liquids;
- does not sit down;
- not afraid of chemicals;
- does not rot and does not turn mold and fungi;
- service life - about 50 years;
- it has one of the lowest thermal conductivity coefficients.
It is used for insulation of walls, ceilings, floors, foundations in private houses, apartments and industrial facilities. Also, like the foam, is used only as thermal insulation.
Polyurene Foolder
Consists of two components: polyulula and isocyanate. Mixing these substances on special equipment, it is possible to obtain polyurethane foam of a different state - from elastic to rigid. Polyurethane foam has one of the best thermal conductivity coefficients, so it is used for the heat and sound insulation of residential buildings and other objects. According to the consistency, it looks like a foam.
On any design is applied by spraying. In just a few seconds, a durable and seamless layer of thermal insulation material is obtained. It is important that all the rules on application technology are respected. Only qualified specialists should work with this thermal insulation using the appropriate equipment.
Positive characteristics of polyurethane foam:
- operating temperature - from -150 ° C to + 200 ° C;
- thermal conductivity coefficient of 0.022-0.028 W / m · K;
- sprayed on any surface;
- a durable and monolithic layer is formed;
- possesses anti-corrosion properties;
- long service life;
- environmentally safe;
- excellent noise insulating material;
- does not require additional transportation costs, since all components brings the service company.
Basalt Wat.
In the production process, from the molten basalt breed processed according to a special technology, mineral wool is obtained. Also additives and binders are also entered. Basalt plates are used to insulate residential premises and other buildings. They are very comfortable when installing, as it is easy to cut a knife. They can be given any necessary shape and install close to the designs of the house. Often basalt plates are used as sound insulation on the outer or domestic walls.
The insulation of inclined surfaces in the attic buildings is convenient to make the mining of the desired thickness. Basalt wool fits well as the fire protection device of the roofs and roofs in houses with furnace heating and baths.
Basalt Wool properties:
- small hygroscopicity;
- high soundproofing ability;
- easily processed;
- has low deformation;
- is a non-combustible material;
- high heat insulating quality.
Bung
Environmentally friendly wood material produced from oak bark and having a porous structure. All cells are filled with inert gas. It has positive qualities in sound and thermal insulation when used in residential areas. Outside it is not used.
Materials made of technical traffic perfectly soundly insulated. It can be distributed by three groups of applications:
- The agglomerate panels are made of chopped cortex of cork oak, followed by ferry processing, and then pressed. Since the cortex contains an adhesive substance suberin, then the unnatural supplements are not required. Two types of panels are made: white - from the bark taken from the branches of the tree, and black - from the trunk cortex.
- Natural plug - applied to decorate the premises. The panels are additionally covered with wax, after which they will not be able to absorb moisture and smells.
- Cork granules are used for insulation of frame structures.
The technical cork is produced in three forms: sheet, roller, in the form of mats.
Rolled insulation is most often used as a substrate under the wallpaper. It happens with antibacterial and refractory impregnation, or without them. It is produced by a length of 10 m and a width of 30 cm to 100 cm. To secure on the wall of the walls, special glue is used.
The plug in the form of mats and sheets is used for insulation of floors, walls and ceilings indoors. It is also well suited for sound insulation from the inside of the roof, the covering of which is made of metal tile or proflist.
Advantages of traffic jam:
- low thermal conductivity -0.042 W / m · K,
- it is distinguished by resistance to deformation;
- good soundproofing indicators - lowers noise at 17 dB;
- excellent antistatic properties;
- environmentally friendly;
- durable;
- natural material.
Working with cork blade do not require additional physical effort, as it is easily cut in size and easy to install.
In rooms with high humidity, cork coating is required to protect with waterproofing materials.
Manufacturers of heat and sound insulation panels
In the market of heat and soundproof materials, cork insulation represents the Portuguese company Amorim Group.
The most popular basalt wool marks are considered:
- Paroc;
- Isover;
- Linerock;
Famous trading brands of polystyrene foam is Penoplex, URSA and TechnoNikol. The Knauf brand is most popular from producers of foam.
Montage Minvati on the walls
The order of work on the noise insulation of the walls basalt cotton:
- A frame of wooden bars is manufactured on the wall. Between vertical racks, the distance makes 2 cm less than the width of the insulation.
- Plates of basalt wool are stacked.
- The planks in a horizontal position are attached to the wooden frame - for the installation of GCL.
- Plasterboard sheets are installed. Screen soldered to horizontal crossing.
Plates of polystyrene foam are installed in another way - they are attached to the walls or ceiling with the help of glue and special plastic dowels-carnations.
In homes and apartments only environmentally friendly thermal insulation materials should be used. Cheap basalt wool will contain hazardous phenol formaldehydes. During the heating of thermal insulation, they begin to turn into volatile compounds that make harm to the health of people.
The insulation of polystyrene foam is better to use for insulation of floors (filling with a screed), balcony, loggia, as it is easily flammable. During combustion, the foam allocates toxic smoke that causes poisoning. Also foamed polystyrene does not miss moisture, so microclimate will deteriorate in houses or apartments with poor ventilation.
I sleep badly and feel discomfort? Began to be annoyed for any reason? The best materials for noise insulation for the apartment will help to cope with your problems and create conditions for a full rest.
The causes of poor noise insulation serve:
- the inadequacy of the home facilities to standards standards;
- faults of fences. Emptiness and cracks reduce sound insulation;
- noise over measure in the apartments of the neighbors or from the outside street.
Every owner of the apartment or at home makes every effort to solve the inconvenience of life and protect against excessive noise. Soundproofing is required to create comfortable living conditions, both in their home and to avoid conflicts. Active children's games, home cinema, musical instruments - a partial list of objects and related activities for scandals.
To determine the choice of raw materials, it is necessary to establish the noise view.
Distinguish:
- Air. Sounds transmitted from outside by air: lively traffic, deafening music, industrial enterprises.
- Shock. Drilling walls, drivening the nails during repair. However, specially intended isolation is necessary when conducting systematic work using a jackhammer.
- Structural. The road transfers the vibration of the walls of the apartment, transforming it into Decibel.
Attention! Noise from the motorway reaches 70 dB.
Noise insulating materials absorb sounds from the outside or prevent the spread from the apartment. It is required to find the appropriate material for the inside of the room.
What to pay attention to, choosing a noise absorbing material for the house?
When behavior of work on noise insulation should be considered:
- Dimensions of the room.
For small-sized premises - a children's room or a bedroom - a plasterboard sheet is suitable, which will not reduce the useful area. The spacious rooms are installed sound-absorbing multilayer structures in a special framework, occupying a lot of space. Stirol, mineral wool or kraft cardboard.
- Purpose of the room.
Materials suitable for the bedroom should not be used in the kitchen, which is characterized by elevated humidity and temperature fluctuations. Separate sustainable insulation materials.
- Invoice.
Its use in houses from monolithic concrete is different from frame buildings. The quality of sound insulators depends on the price.
- Separate watches.
It is required not only to combine soundproofers and noise-insulating materials, but also take into account their quality properties. The purpose of the invoice is the interior decoration of the premises, so the substance harmful to health is excluded: bitumen and lead, mercury and formaldehyde, volatile resins, EPDM compounds and volatile resins.
- Sealing docks and cracks.
Designs requires integrity and monolith. Therefore, all extra holes and holes eliminate. Not sealed connection, uninsulated air pipes, risers and sockets lower noise insulation. Close up of joints with soft mastic or sealant.
- Qualified installation.
To achieve an effective result, competent minting is required. Qualified workers on noise insulation, repair and finishing will come to the rescue. It is important that sound insulation based on designer ideas corresponded to the interior inside the apartment or at home and did not prevent engineering communications.
Popular firms
Choose noise insulating materials not only at a price, but also, focusing on the distinctive features of the structure, installation. The construction market presents a rich assortment of goods. Products of domestic and foreign companies producers are extremely popular:
- Maxfort (Russia);
- ISOVER ECOPHON (Sweden, Finland);
- Wolf Bavaria (Germany);
- Acoustic Group (Russia);
- Acousticwool (Ukraine);
- MAPPY (Italy);
- Rockwool (Denmark);
- TECHNO SONUS (Russia);
- TexDecor (France);
- TechnoNikol (Russia).
Quality noise insulation rating
Establish demand from consumers:
Signs from 95% of noise, especially shock species. It is recommended to cover the walls without leaving gaps and gaps. The main thing is that the size of the premises allow the installation work.
Advantages:
- Not combustible;
- universal application: for walls, floor, ceiling;
- durable.
Disadvantages:
- Gigroscopicity. Prevents the use of indoors that differ in dampness and humidity;
- multilayer laying;
- the need to follow the integrity of the edges.
Price - 773 ruble per pack.
Covering from traffic jam
Novelty among building materials.
Advantages:
- moisture resistant;
- variety of shades;
- environmentally friendly;
- antistatic;
- resistant to fungus and mold.
Disadvantages:
- not budget option;
- flammable;
- subject to mechanical impact;
- burns out;
- difficulty dismantling.
Price - 360 rubles per pack (2m2).
Termowoisol
Three-layer noise insulator. Inside there is a canvas of fiberglass, coatings outside - from propylene. It is characterized by a dense firmware of the layers.
Termowoisol
Advantages:
- ecologicaly clean;
- easy to mount;
- fireproof;
- not susceptible to moisture and high temperatures;
- small heat resistance;
- it is not afraid of rodents and insects.
Disadvantages:
- makes it difficult to work when installing due to large dimensions and layer thicknesses;
- installation requires high time;
- not suitable for the ceiling.
Price for 1 roll (15 m2) - from 2,800 rubles to 4,800 rubles, depending on the brand.
On the advantages of the use of this material and the features of use - in video:
Polyurene Foolder
Good noise insulator. The grooves provide a high degree of adhesion density of surfaceness of surfaces.
Polyurene Foolder
Advantages:
- resistant to burning;
- not toxic;
- not hygroscopic;
- neutral to the action of acids and alkalis;
- easy;
- long service life.
Disadvantages:
- susceptible to the effects of the sun;
- applied to dry and warm coating;
- in the course of operation darkens.
The price of a sandwich panel from PPU - from 1,138 rubles per m2.
Natural raw materials. Based on wood fibers. Dimensions 2. 7 × 1. 2 m accelerate the mounting process. One side without roughness is entirely suitable for processing. The texture is capable of making walls smooth.
Advantages:
- environmentally safe, does not cause individual intolerance;
- additional strength and rigidity to the construction;
- long service life;
- easy when installing;
- it is easily cut by a knife.
Disadvantages:
- high price;
- you will not find in every store building materials;
- not resistant to moisture.
The price is 630 rubles per sheet (3.24 m2).
More information about the characteristics of the material - in video:
Variation of kraft cardboard with turning on paper and wood fibers. Excellent countering noise reaching 23 dB. A small thickness (1.2 cm) leaves almost unchanged beneficial meters of the apartment. Sticking the panels on the wall surface.
Advantages:
- easy;
- high strength;
- cheap;
- it is convenient to operate;
- no framework is required;
- eco-friendly.
Disadvantages:
- not suitable for premises with high humidity;
- combustible;
- suspended by the attack of rodents and insects.
Price - from 25 rubles per kilogram.
MAKSFORT SOUNDPRO.
This newest sound insulation material produced in the form of a roll size of 1.4x5 m. Its thickness is only 12 mm, while it is able to provide a high level of protection against drum and air noise. A specially laid aluminosilicate fiber provides such high indicators. The meaningful property of this material is its complete non-aggression, which is confirmed by the corresponding certificate.
MAKSFORT SOUNDPRO.
Disadvantages:
- Sold in rolls, it is impossible to buy on a lot;
- It is impossible to buy in retail stores, only through the manufacturer;
- High price.
Cost - 1090 rubles per 1 sq.m.
See how the material is mounted, you can in the video:
The system without a frame for walls and ceilings, which includes a sandwich panel. Attached to the wall. Models are characterized by layers: dense, light. 
zipse Panel
Advantages:
- speed and ease of installation;
- resistance to ignition;
- eco-friendly;
- produced from domestic materials;
- vibration neutralizer;
- it is possible to apply finishing.
Disadvantages:
- installation only on smooth coating;
- difficulty when conducting wiring and installing sockets;
- non-turn to use, do not stand the weight of more than 5 kg;
- a large number of fasteners affects the worst way on the acoustic properties.
The average price per panel - 1062 rubles.
Texound
New sound insulation popular material. As part of felt and polymer coating. Looks like rubber. Application: floor, ceiling, walls.
Texound
Advantages:
- thickness in 3 mm allows you to save the useful placement location;
- flexible. Circular insulation is possible due to the material in the roll;
- the latitude of the range from 28 dB. It is considered one of the best;
- mass application not only in everyday life, but also industry;
- not subjected to destruction;
- moisture consoles and resistant to temperature differences;
- long shelf life.
Disadvantages:
- leaf length - 5 meters;
- wall coating requires alignment and primer.
Price - 1320 rubles per meter.
Noise isolation for ceilings
Often it is not enough to stick the rolled insulator. Wallpapers for a plug or tile will help solve uncomplicated tasks. For the sound insulation, the ceiling will have to come with the height of the apartment. The most effective reception is the construction of the ceiling construction.
Distinguish:
- stretch ceiling of film or fabric that is installed on a predefined brackets;
- stewed ceiling of plasterboard. In the metal frame, attached to the ceiling, laid minvatu or other shcho-insulating material;
- suspended ceiling. When installing the frame, sound insulation fillers are used: cork, polyurethane foam blocks, coconut fibers, basalt wool cork. Closed panels.
Practical video tips on the installation of the ceiling noise insulation do it yourself:
Noise insulation of walls
Before working inspect the wall and close up the slots and cracks. The fastest and most convenient way to lose cement. Pull the electrical outlets and check the availability of voids. If necessary, lay mineral wool, seal the hole with a putty or cement before putting the outlet in place.
Noise insulating material and installation methods are selected by price, efficiency and quality of sound insulators, as well as a lot of "eaten" useful space.
A variety of texture is used for decorative sound insulation of walls. The construction services market provides a wide range of products. Especially popular with consumers:
- plasterboard;
- noise insulating panels;
- rolled material.
Video instructions for working with zip-panels when insulation of walls:
Installation of plasterboard
Collect frame. If the walls are different, fastening the profile on the rubber lining. Minvat or other material as a noise reduction in the prepared crate. The design is covered with plasterboard sheets. Spit, carry out the finish.
Build a noise insulating panel
With a flawlessly smooth coating, the panel is installed immediately on the wall. Fastening thanks to the latch-protrusion lock or with the help of construction glue. The problem of alignment of the wall coating is solved by two ways: assembling the frame as in the case of mounting drywall or putty.
Installation of the panel is quite simple. The finish is not required, since there is a surface coating. A variety of materials and color gamuts: paper chopers, fabric, lamination for wood or stone.
Casting rolled noise insulators
Save financial costs and time. Convenient to use. Adhesive for dense vinyl or fliesline wallpaper is used. Work is not very difficult, the result is good for inexpensive material. Roll soundproofers cope with 60% noise.
Noise insulation for partitions
As a rule, a two-layer sheath is applied. Installation is carried out in various variations: drywall, plywood, glass edgeless or gypsum fiber leaf. The construction of 2 layers of plasterboard sheets with a leaf of the gypsum is not only massive, but also positive resonant properties. Vertical fastening of sheets of screws at a distance of 25 cm so that the connection of the layers occurred with the shift. The docking plates is closed with a putty or silicone sealant.
Read more about noise insulation of partitions - in video:
Frameless coating
The Zipse panels, unlike the metal frame, are attached directly on the wall. Represent a sandwich consisting of dense drywall sheets and a plastic sound-cutter from staple glass gamble.
For clutch, the plates serves a puzzle docking, to strengthen the vibration procurement unit. Plus: The minimum "eaten" useful space. Minus: Dear.
"Knauf Insulation Acoustic Partition"
Heaters from mineral wool in the form of plates or mats. Possess reinforced elastic qualities. Special production technology is reflected on the degree of sound absorption.
Products are an excellent soundproofer. It is used as a noise insulation texture for frame-and-sheat partition devices.
Noise isolation for musicians
Acoustic foam rubber creates sound comfort in musical studios at home, apartments, private houses. Changes with a strong echoing, unspeboristic speech, musical accompaniment.
Consumers-musicians Sound insulation plates Flexakustik from the domestic producer are Acoustic Group.
They are made of acoustic foam-based PPU foam. Thickness and diverse embossed surfaces have a positive effect on the aesthetic look of the product, promote the preparation of the needed sound effect.
Advantages:
- original embossed coating;
- safe for health;
- convenient in work: sticking;
- comfortable acoustic "plug" of the room.
Disadvantages:
- expensive.
The average price is 1460 rubles per m2.
Noise isolation for dacha
What company is better to choose? Will buying on the family budget? Will there be no sound insulation issues? Answers to these questions are looking for consumers before choosing a high-quality invoice for a country house. It is impossible to answer unequivocally, since each material has its own qualitative characteristics, advantages and disadvantages, cost.
To avoid errors when choosing a product, you should consider the compliance of the material set: the absorption of air or impact noise. The first form corresponds to the materials with fibrous or grainy base.
Advantages:
- inexpensive;
- low;
- simple in mount.
Noise-insulating designs interfere with penetrating outsiders in the apartment.
Disadvantages:
- massiveness;
- heavy weight;
- disadvantage in the mount.
Take into account the size of the rooms. In a small room - ultrafine noise spread. Large designs are reduced by a useful female.
All-selling materials
Do not come out of fashion:
- mineral wool and traffic jam;
- sandwich Zipse panels and plates of isoplat;
- panels for the walls of Kraft and Taxaund.
Panel Economicalizol
Based on the production of quartz sand and a semilate profile of cardboard. The thickness of the acoustic mat is 13 mm, weight up to 18 kg, noise insulation index - 38 dB.
Panel Economicalizol
Advantages:
- frameless;
- glued on the wall;
- subtle;
- easily cut.
Disadvantages:
- heavy;
- during the work, the mineral filler can be saturated.
Price - from 450 to 1500 rubles.
Mineral Plates Shumanet
