Drawing of a summer shower from a profile pipe. Do-it-yourself outdoor shower is a great solution for a country house

One of the most enjoyable and useful inventions of mankind is souls. For those who are accustomed to the civilized adoption of water procedures, city residents not so long ago had to experience discomfort while staying at a summer cottage or country house ownership with the possibility of only summer residence. Shower in a personal plot or in the courtyard of a private house, used in warm time years is not an easy opportunity to get pleasant and much needed water procedures in the heat, but also an important element of landscape design. The appearance of the shower cubicle, panel or just a rack plays a role in shaping the image of the entire site, adjoining territory... Gone are the days when a summer shower was an unprepossessing structure constructed from materials left over from the main construction or found on the rubble of a shed or attic. Modern building materials, original plumbing solutions and many creative design ideas are able to make the usual place for taking a shower a highlight of landscape design, a key element of the arrangement of the local area.

Classification of summer shower facilities

If we talk about the qualitative separation of summer shower designs, then all models can be classified into open and closed. Such a division is very arbitrary, because there are many examples of the construction of a summer shower in spaces half-enclosed by fences. For example, an outdoor shower can be arranged in an area fenced off with only two partitions, placing plumbing accessories on one, and hooks on the other for placing clothes, towels, etc.

Besides the construction of the shower itself, summer constructions can be subdivided according to the method of water supply into capacitive and tap water. In the first case, a reservoir is located above the level of the upper shower head, in which the water is heated by the sun's rays. In the second case, water is used, obtained from the common water supply system of the household.

The choice of the water supply system for the shower head is directly influenced by the location of the structure in relation to the house. If an outdoor shower is located near the building of a private house, then it is logical to use not only the water supply system, but also the sewer drain. If a capacitive summer shower is located in a summer cottage or in the courtyard of a private household far away from the building, it will be necessary to take care of the drainage system. It is important to understand that you cannot just direct the waste water flow into the beds. suburban area or under trees, because the adoption of water procedures can be accompanied by the use of products, the effect of which on plants can have a detrimental effect.

Shower cubicle - traditional style

One of the traditional options for arranging a summer shower is the installation of a shower stall. Such a structure can be made of wood (in natural color or painted), polystyrene panels (most often using a metal frame) or other available means. Moreover, you can purchase a ready-made booth, order an individual production or build a fence for a summer shower yourself (if you have basic skills).

A shower cubicle made of wood in its natural manifestation is not only a practical construction, but also a beautiful element of landscape design. The natural wood grain blends perfectly with almost any facade material. Not to mention the fact that the natural color fits perfectly into the surrounding landscape, echoing with perennial plants and other buildings on the site and in the courtyard of a private house. But the wood of the shower stall will need to be protected from constant exposure to moisture. There is a wide selection of antiseptics and special varnishes on sale that can protect natural material from decay and do not affect the color of the wood.

For everyone who does not want to puzzle over the covers for wooden booth, there is a universal option - painting. Depending on the color solutions adopted for decorating the facade of the building, it is fashionable to choose a harmonious option for a closed facility for outdoor water procedures. The first option is matching color palette architectural ensemble, combinatorics, both with the main building and with additional buildings on the site (terrace, gazebo or garage). The second option is the performance of a shower stall as accent color... This method of creating a color spot is rarely used, because an outdoor shower is a seasonal building, which is used in our country only in the summer.

Using the wall of the house to equip a shower

Placing a summer shower against the wall of the house has its own advantages and disadvantages. On the one hand, it is convenient that you can use the common water supply and sewerage system located in the household. On the other hand, the wall of the building will be constantly exposed to moisture. It is advisable to protect the surface with ceramic tiles or any other material that effectively resists high humidity. It is also necessary to track the organization of a good drainage system... Otherwise, the constant accumulation of water in the area of the foundation of the building can gradually destroy it.

Another advantage of using the wall of the house to organize the place for taking water procedures is the possibility of using the lighting of the facade of the main building. If you need to take a shower at night, you will not need to worry about the presence of artificial lighting sources - the building facade is in any case illuminated for safety and as an element of landscape design.

An excellent way to protect the wall of a house from constant exposure to moisture is cladding with ceramic or stone tiles. In this case, there is no limit to the realization of your fantasies and the manifestation of stylistic preferences. Ceramic tiles "marbled", plain or with an ornament, large or small - it all depends on your personal preferences. If there is a pool on the site, then it would be logical to coordinate the wall decoration for placing the shower with the design of the space in and around the street tank.

Stone tiles (or their spectacular imitation) will look luxurious as a wall decoration, to which plumbing accessories are attached - a shower head or a mixer. In combination with greenery, the stone surface creates an image close to natural nature.

One of the options for finishing the space in which shower accessories are located is the use of metal sheets. Stainless steel or aluminum look great in a high-tech composition or any direction of modern style. In order to enhance the effect of the originality of the finishing material, you can use original accessories - large square or rectangular watering cans, imitation of a tropical rain or waterfall.

With the help of a metal sheet, you can build something like a small shower cubicle in the summer at a summer cottage or in the courtyard of a private household. Ugly appearance is more than compensated for by the low cost of construction and temporary placement in the local area.

It is possible to equip an outdoor shower with devices that provide additional opportunities for taking water procedures. For example, installing an additional tap on the lower level of a rack or panel will give you the opportunity to wash only your feet after working in the garden or bathing your pets right on the site.

Shower panel on site

Any partition - made of stone, wood or other materials - can act as a panel for placing a shower. The advantage of such structures is that their construction requires less materials and efforts. At the same time, you get an area for taking water procedures, which, with an abundance of moisture, does not harm the main structure. But such a summer shower also has its drawbacks. The shower area not protected from the wind can cause colds in households who do not know anything about hardening the body.

Using a beach style for your shower panel can be the highlight of your landscaping. It is not necessary to live by the ocean to be able to use the surfboard panel when setting up a water treatment area.

Perfect for finishing the panel to which the plumbing accessories will be attached ceramic tile or a mosaic that reliably protects the surface from moisture. But even more affordable options can become effective solution- plastic and polyurethane panels will serve as a reliable finish.

Using non-standard, original models plumbing accessories can increase the degree of uniqueness not only of the shower sector, but also of the entire landscape design of a summer cottage or personal plot. Large watering cans to simulate tropical rain, a small waterfall or vice versa, miniature mixers, original forms and unusual coatings - your fantasies are stopped only by the budget for the construction of a summer shower.

The panel for placing the shower sector can be a sector of the fence that encloses the site. It all depends on the location of buildings on your site, the passage of communication systems and the type of fence design. For example, stone concrete, wooden structures (impregnated and protective coating) can be an excellent base for placing plumbing accessories.

Outdoor shower on the terrace

A shower rack for water procedures in the warm season can be located on an open terrace, for example, by the pool and serve as a means of ablution before entering the water. Also, an outdoor shower can be arranged on the covered terrace, which serves as a place for outdoor relaxation.

On the one hand, placing a shower on a terrace complicates the very process of design and preparation - after all, it is necessary to supply the water supply and ensure a reliable drainage of the used water. But on the other hand, the sector far from the main building for the adoption of water procedures provides a minimum exposure to moisture (and in summer season owners often use showers) on a private building or country house.

Shower column - an original element of landscape design

One of the simplest, but at the same time effective ways shower facilities in a summer cottage or personal plot - using a stand with a watering can or any other device for supplying water. In fact, you only need to provide a water supply (as a rule, there are no problems with these, because in any case they pass through the site water pipes) and drain into the sewer. With this approach, it is possible to provide conditions for the adoption of water procedures, as close as possible to natural and even wild. Lush vegetation, a shower simulating a tropical downpour, smells and sounds of nature - what else do you need for a relaxing bath?

Some types of racks, which are ready-made solution for arranging a summer shower in the country or in a private yard, they can be equipped with a tank for heating water from the sun's rays. The rack itself can act as a reservoir. This is a great alternative for regions with interruptions in the water supply during the summer - you always have a small supply of water, which is enough for a quick shower, even during a water cut in the water supply system.

Outdoor shower - choosing a practical and original design

Owners summer cottages trying to bring water into the house and equip basic amenities. You can build an outdoor shower in the country with your own hands, both temporary and capital - the type of future structure is selected depending on individual needs.

Before you build a shower in the country with your own hands, you need to correctly design, determine the location of the future structure, select materials. The room should be loose, as comfortable and convenient as possible for use.

Seat selection

In order to ensure a quick drainage of water, it is optimal to install the shower on a level or slightly elevated area. You should not choose a site located in a strong lowland or in a hole.

To avoid stagnant water, choose the right place for building a summer shower

An open area well-lit by the sun, which is located at some distance from other buildings, will be optimal for a country shower. In this case, the barrel will naturally heat up under the sun, providing warm water... This condition can be neglected only if it is planned to build a shower stall with heated water.

At the same time, the site where construction will be carried out should not be too far from the house - after water procedures, it is advisable to get out of the shower into a warm room as soon as possible.

Sizing calculation

When building a country shower, the following parameters are standardly used:

height - 200-300 cm;
length - 190 cm;
width - 140 cm.

An example of drawing up a drawing of a summer shower

The indicated dimensions are very convenient in that, taking into account the thickness of the walls, the building will ultimately come out with an area of 200x150 cm - this is a completely waste-free option when using boards of standard sizes. As a result, 100x100 cm will be allocated for the shower stall, and 600x400 cm for the changing room.

Required tools and materials

You will need the following tools:

roulette;
corner;
level;
hammer.

In addition, you need to stock up on nails and a skein of twine. Separately, you need to purchase a tank, as well as pipes, a couple of taps and a shower divider. Brick, iron or plastic sheets are suitable as a building material for the construction of a cabin, wooden planks, for the construction of the frame - pipes.

Tools needed to build a shower in the country

For the foundation pouring and erection of brickwork, a certain amount of cement, sand and concrete will be required, and for the final finishing - insulation materials, paint, plaster, clothes hooks, shelves for bathroom accessories and other accessories.

Options for shower designs for summer cottages

The easiest option for giving is compact portable shower, which is suitable for a one-time reception of water procedures, has a standard volume of 20 liters and is designed to supply water for 10 minutes. The principle of operation is reduced to filling the reservoir with water and subsequent heating in the sun, after which the portable shower is mounted at a height of 2 meters and is ready for use.

Portable shower

An open shower also has a simple design, the installation process of which boils down to the following steps:

fastening to the wall of the branch of the water supply pipe;
connection of a pipe and a watering can with a hose;
fixing the holder of the watering can;
installation of the screen.

A common option for a summer cottage is the so-called change house with a shower, the design of which assumes the presence of a one-piece modular container or a frame-folding unit.

Options for a stationary summer shower for a summer residence

The installation of this structure is quite simple - the marking of the territory is done, the upper ball of soil is removed and leveled, a cushion of sand with gravel is created, on top of which the boards are laid. On the soil prepared in this way, a block assembled in place or a ready-made structure is installed.

Of course, a stationary shower will become the most solid, but its construction will require more effort and time.

Preparation of the base

It is much easier to build a frame structure than a capital structure - depending on the type of construction chosen, the stages of preparing a site for construction will differ.

For a temporary construction, it is enough to simply remove 10-15 cm of the topsoil from the site in order to level it, and then cover it with sand.

For a country capital shower, you will need to lay a foundation, the depth of which is determined by the materials that are used for its construction. For example, for a brick shower, a foundation will be quite enough, the depth of which will reach 30 cm.

Foundation for the construction of a capital summer shower

The foundation is laid in the following sequence:

pegs are hammered in the outer corners of the future shower;
a cord is pulled along the perimeter;
a place for pipes is being prepared (a log or a branch wrapped in roofing material is laid);
concrete solution is poured.

Advice! The formwork equipment will allow extending the operation period of the shower - it is recommended to raise the level of the entire foundation by 10 cm, raising it above the ground with the help of boards reinforced with stakes and spacers.

Drain pit equipment

The pit volume is usually more than 2 cubic meters. m, while its walls must be strengthened in order to avoid possible debris. The drain is located a few meters from the shower, but not under the building itself or near its walls - this will lead to the destruction of the foundation in the future, as well as to the appearance of unwanted odors.

An example of the equipment of a drainage pit for a summer shower

The drain should be laid with a waterproof layer - roofing material, hydroglass, PVC film or concrete screed (reinforced with a metal mesh) are used.

Attention! A common mistake is to use clay as an insulating material, which erodes and soon clogs the drainage ditch.

Installation of a frame for a temporary shower stall

If for a capital structure brickwork, then for a temporary one, a frame is usually installed: metal or wooden. In the latter case, the tree should be treated with special impregnations that protect it from insects and moisture, preventing the formation of fungus and mold.

Wooden frame for summer shower

Marking is made - a rectangle is indicated right on the ground, the sides of which correspond to the dimensions of the future summer cottage shower.
Wooden beams are installed, the width of which reaches 10 cm.
The dressing is performed - starting from the top, the structure is securely bolted together, after which the base bars of the shower walls are connected.
Walls are equipped, for the construction of which you can use both boards and slate or plastic panels.
Piping is in progress - the water supply is installed so that the outlet of the pipe under the shower hose is higher than the level of the head (this will provide the necessary pressure for the movement of water). For drainage, an output is made to a sump or to a specially equipped septic tank.
A tank is installed - a threaded outlet is made, a tap with a corresponding nozzle is placed, after which the barrel rises up and is fixed.

A plastic container, which can be purchased in a specialized store, or another barrel available on the farm, is suitable as a tank for a country shower. It is desirable that it be flat and commensurate with the area of the building so that the weight is evenly distributed over supporting structure... Its volume is selected at the rate of 40 liters per family member, but the barrel should not be too heavy - its maximum volume is no more than 200 liters!

Tank for heating water from the sun

Advice! So that the owner of the summer cottage does not have to carry water into the tank on his own every time, you can equip it with automatic filling.

Lighting and ventilation of the country shower

When making your own wiring, it is important to follow all the rules for wiring and adhere to safety precautions. Separately, due to high humidity, you should take care of the insulation of the wiring.

Window for ventilation of a summer shower

Internal shower finishing should be made of moisture resistant materials: plastic panels, pieces of linoleum, oilcloth, etc. If wood is used, then each separate board is covered with hot linseed oil.

The concrete floor is usually covered with plastic or wood gratings, and rubber rugs are laid on top. It is quite convenient to equip a small dressing room directly in the shower room. In order to prevent water from getting into it, the floors in it rise slightly by a couple of centimeters - this is easy to achieve by additionally placing a pallet.

The interior of the summer shower

Concerning exterior decoration, then similar materials that have already been used to design a country house and other buildings on the site will look harmonious.

To use the shower not only in the summer, but also in the colder season, it is recommended to insulate it with expanded polystyrene, which fits into the inner space and is upholstered with PVC film on top. Walls are usually painted or plastered, sheathed with clapboard or siding.

How to build an outdoor shower in the country: video

Summer shower types: photo

Most of the Russian summer residents, during their stay in nature, are engaged not only (and not so much) with rest, but with useful work. In general, it is natural for a person to use his plot of land with maximum benefit. Therefore, even in small areas, there are a couple of beds on which someone will definitely work. And if there are no beds, then there are lawns that also require maintenance.

As a result, towards evening, tired people want to take a shower, have dinner and relax in peace. Therefore, usually after, which is erected first, most people try to create conditions for hygienic procedures. At the same time, not everyone strives to build or a capital washroom with heated water. But an outdoor shower can be seen in almost every area.

Although it is a light structure, the site should be chosen for practical reasons.

Do not put a shower "where you have to":

It is advisable to choose a platform located on a hill so that the shower drains are freely removed, and a swamp does not form under the shower.
Since the shower is summer, it is assumed that only solar energy will be used to heat the water. Therefore, it is necessary that the water tank, located on the roof of the building, be in the sun as long as possible during the day. For this reason, you should not put the shower under trees or in the shade of other buildings.

Thus, the shower must be built on a level or elevated open place and preferably at some distance from the house, so that there is a place for organizing the water drain.

You can not deal with water drainage issues only if you decide not to "fool your head" with the construction of even the simplest building, but use a portable shower in the form of a large plastic bag with a watering can (usually its volume does not exceed 20 - 25 liters). Such an impromptu shower can be hung on any branch and used without the risk of making a swamp after washing the whole family. The soil will accept a small amount of water a couple of times a week without problems.

In all other cases, it is imperative to be puzzled by the drainage. Moreover, soapy water is not so harmless to the surrounding soil.

Everyone decides this question for himself, based on his own preferences, material capabilities, as well as the materials at hand that are already available in the country (often left after).

If you purchase a plastic shower block, then this question generally becomes irrelevant. The block is a single whole, you just have to prepare the site for its installation.

If you nevertheless decide to build with your own hands, then most likely you will plan construction frame structure... Therefore, the first step is to decide which material to choose for the construction of the frame.

The most common material for the shower stall frame is wood. Firstly, in the country there is almost always a small supply of bars and boards left after the construction of a house or kitchen. Second, the erection timber frame even an inexperienced person in construction can do it. The only condition: it must be borne in mind that the shower stall is constantly exposed to water, so everything wooden structures must be treated with impregnations that prevent the wood from getting deeply wet, which will inevitably lead to its rapid destruction. It is also important to process the part of the wooden posts that will be buried in the ground. To do this, you can use bituminous mastic, waste oil or special impregnations.
The second most popular material for the frame is a light metal profile or shaped steel pipes. Threaded connections are used to assemble the steel frame.

Recently, plastic pipes (polypropylene or PVC) are often used for the frames of shower cabins, which are simply put on pieces of reinforcement driven into the ground. Plastic frame is inexpensive and most resistant to moisture. True, buildings on such a basis do not differ in rigidity and strength. In addition, most construction materials cannot be used to cover such a shower. wall materials... Usually, a dense opaque plastic film or tarp. And you can't put a large water tank on such a frame. But the shower turns out to be collapsible and in the fall it can be easily turned into "spare parts" and removed until spring.

The wall cladding material is determined by the selected frame type. If it is wood or metal, then you can sheathe the shower with almost anything, from wood to corrugated board, polycarbonate, plastic and other modern materials.

There are two ways to organize the drainage of water from the shower stall:

arrange drain hole;
perform the simplest drainage.

The second option is suitable for a summer shower, which is operated only periodically, while the volume of drains is small. Drainage can be arranged directly under the shower by removing some of the soil and replacing it with a pillow of sand and gravel or broken brick. Also, the site can be paved with cobblestones.

If the soil on the site is clayey, then you will have to remove the soil to a depth of 100 cm and fill the hole with alternating layers of sand and gravel. The upper layer is crushed stone, the lower layer is sand.

If it is supposed active use shower with application detergents, you will have to deal with the device of the drain pit. It can be placed either directly under the building, but it is better still a little to the side.

If the soil on the site is ordinary, then a pit 1 - 1.5 m deep is quite enough. If it is clayey, then it is better to go deeper by 2 - 2.5 m. The walls of the pit must be protected from collapse by laying them out with brick or stone. Many people use for this purpose car tires large diameter. Often, an ordinary garden barrel without a bottom, dug into the ground, is also used as a pit.

The size depends on the planned dimensions of the shower stall. The room should be small, but convenient for all family members. Therefore, most often the shower room is divided into 2 parts - the "dressing room", where dry clothes are left, and the shower itself.

Most often, the cabins have the following dimensions:

width - 100 - 120 cm;
length - 140 - 160 cm.

There are both smaller and larger buildings. But those that are less than 1.2 * 1.2 m are not very comfortable.

As the floor of the shower stall, you can use wooden grates, which do not interfere with the flow of water into the drainage pit.

Also on sale you can find steel pallets with a drain hole. Such a pallet is connected by means of a pipe to a drain pit. But its installation will require concreting of the site. The presence of such a pallet allows you not to engage in drainage under the shower.

For comfortable operation of the shower, you will need to install a sufficient tank above it. big size... Its volume is chosen based on the number of family members and an approximate water consumption of 40 l / person.

As a tank (or tanks), you can use metal or plastic drums painted in dark color... They are mounted directly above the shower. Now on sale you can find flat water tanks, directly intended for installation on the roof of the shower. Modular showers are usually equipped with a built-in tub.

If the tank is large, then a separate supporting frame may need to be erected to install it.

To maintain the hygienic purity of the water in the tank, it must be possible to flush it running water with drainage of dirty water at the lowest point of the tank. This will remove sediment from the bottom of the tank and disinfect it. In order to avoid getting mosquito larvae and debris into the container, it is better to close the upper opening of the tank with a fine mesh.

For those who want to use the shower not only in summer, but also in autumn, there are tanks with installed heating elements on sale. Being connected to the mains, they allow you to quickly heat the required volume of water to the required temperature.

Since it is difficult to lift water to a height of more than 2.5 m manually, usually the tank is filled with a pump.

What else needs to be considered

Considering that the daylight hours are quite long in summer, the soul can be neglected.

The difficulty lies in the fact that the room is small and it is almost always damp. When organizing electric lighting, you must follow all the rules and precautions for laying electrical wires. This will allow you not to be afraid of electric shock while washing.

It is better to organize a small window in the shower wall. The transmitted light is sufficient for a comfortable wash.

Humidity in the shower

In order for the shower from the sanitary room not to turn into a hotbed of dampness and mold, it is necessary to provide for good ventilation of the room.

If the shower is light, with openings, then it will dry well anyway. If the room is solid with solid walls, then a hole must be provided in the upper part of the wall. It will allow heated humid air to quickly leave the shower volume and speed up drying.

This is a purely master's business. Still, a beautifully designed shower can serve as a decoration of the site. Therefore, you can plant near him moisture-loving plants, which, with an abundance of water, will quickly grow, and your shower will turn into a fabulous house, which will be gladly visited by both adults and children.

Hot weather is a rarity in most of our country. On cold days, there is simply no way to heat the water in the container to the desired temperature. There are not so many people who want to take an ice shower.

By a country shower, most people mean simple design with a barrel on the roof. This shower has the following disadvantages:

the water in the container blooms very quickly;
there are constant problems with filling the barrel;
it is impossible to maintain the desired water temperature.

To implement the idea, you need to read the advice of the craftsmen. A summer cottage shower will allow the family to comfortably take water procedures.

Mobile shower works by following principle... Any container is installed near the device. It can be a bucket or a bowl. Warm water is poured into it. After that, the end of the hose is lowered into the container.

The device that pumps water into the shower looks like a rug. A hose with a watering can is connected to one end of the pump. Thus, you can get a stream of water, which will flow while stomping on the mat. This option is convenient because the mobile shower can be used not only in the country. The device is useful for people who want to maintain hygiene while hiking. Even in such Spartan conditions, you can wash yourself. The advantage of this shower is the ability to adjust the temperature of the water.

How to make an outdoor shower in the country with your own hands - to build a reliable structure, photos and sizes are carefully selected.

When building a stationary shower, the owner needs to decide where to drain the water. If there is already a semblance of a drainage pit on the site, then you can drain the water directly there. But this is not the best solution, as many people use bacteria to process wastewater. An increase in moisture will have a negative effect on the rate of purification of the contaminated liquid.

In the process of building a shower room, it is best to make a separate drain pit. Broken bricks can be used to strengthen the bottom of the pit.

The hardest thing is to reinforce the hole dug in the sandy soil. Its walls will be eroded by wastewater during operation. Therefore, it is necessary to sheathe the walls of the sandy depression with boards.

The owner can save money when building a shower at the expense of materials. There is no need to build a shower for the construction. In the construction of the base, they are most often used foundation blocks... They are level and the shower is raised 20 cm above ground level.

This height is sufficient so that the treated wood does not rot. When building a base, it is not at all necessary to use wood. You can weld a metal body and put it on paving slabs... If desired, you can strengthen the base by filling it with concrete.

There are no specific standards for the framework. The shower cubicle usually consists of several parts. A changing room can be arranged in one compartment. There is a water heater in another room. Firewood can be used as fuel.

A room for storing inventory can be attached to the shower. If you are planning a lighter construction, then you can use next option- instead of a door, hang a curtain. This will facilitate construction and reduce construction costs. Be sure to consider the height of the people who are going to the shower. The optimum height should be 2.2 meters. The width of the structure must be at least 0.9 meters. In the manufacture of the frame, not only metal, but also wood can be used.

For the manufacture of a metal frame, it is advisable to use corners with a thickness of at least 4 millimeters. The width of the shelf depends on the load. The frame will hold the water tank. What if you plan to supply a plastic container with a volume of 100 liters?

In this case, it is necessary to carry out the procedure of sheathing the shower cubicle on both sides with a special clapboard. This material is considered the most practical. It has an attractive appearance and is able to withstand a humid environment for a long time. But for this it is necessary to process the lining with a special solution.

To do metal carcass you can use scraps of metal pipes. The pipe wall thickness must be at least 3 mm. Otherwise, the shower structure may not be able to withstand the load.

The frame can be strengthened by the lathing. To do this, weld additional corners to the structure. In the absence of a welding machine, it can be fixed with bolts.

To build a shower in the country with your own hands, you need to calculate the volume of the tank. For a family of 4, you will have to put a barrel with a volume of 100 liters. For the manufacture of a wooden frame, you can buy a bar. The bars are fastened according to the thorn-groove system.

An outdoor shower for a summer residence with your own hands can be built without the use of expensive materials.

The foil is considered the cheapest material for covering the walls of the shower. The disadvantage of this option is that the service life is too short. In a year you will have to buy a new film. Therefore, summer residents prefer more reliable materials that can last for several seasons.

It is better to give preference to fabrics with impregnation. This material is used for the manufacture of awnings and tents. When buying lumber, keep in mind that you cannot use fresh lining. The reason is that any lumber is shrinking.

During the drying process, the material loses its shape and previous dimensions. This affects the quality of the lumber. On its surface may appear various defects reducing strength. Warping and cracking are the most common imperfections that affect wood structures. In a structure built from fresh sawn timber, cracks may appear in a year. Do-it-yourself shower in the country, drawings, dimensions, photos are of interest to many users who wish to warn themselves against these shortcomings.

For cladding, you can use the profiled sheet left after the construction of the fence.

Polycarbonate is a transparent material that will brighten up any shower room. Avoid crevices as dust and moisture can enter. It is a favorable breeding ground for algae. Gradually, the walls of the polycarbonate will be completely covered with greenish vegetation.

When erecting a shower, a ventilation system must be provided. Constant moisture can cause wood to rot. A fungus appears on the walls, destroying the structure.

Any capacity is suitable as a shower tank. It can be a metal or plastic barrel. However, plastic barrels heat water worse. For middle lane this can be critical as the water needs to be heated.

Ice water hardly to please the owner of a country house. Although plastic containers are cheaper than metal ones. But this is the only advantage of such barrels. It is best to install metal containers. They are not only easier to install. The hosts don't have to think about how to secure metal barrel... In such a container, the water will heat up much faster. The process of heating the water can be accelerated by painting the container black. The disadvantage of this option is the appearance of rust.

People are wondering how to make a shower in the country with their own hands and how to choose the right container for water, when studying a photo of a building, you can decide on the right choice of design and water container.

Sometimes a septic tank is installed directly under the shower stall. In this case, the boards are laid with a gap of 3 mm. The water will flow down and fall directly into the drain pit. In sandy soil, water will not stagnate.

But for clay soil this option of a septic tank will not work. To organize a normal drain, you need to dig a hole in another place. A pallet for building a septic tank can be bought at the store. The finished pallet must be selected based on the size of the future building. It is necessary to install bars around the entire perimeter, otherwise it will dangle.

The foundation can be made of bricks. At the bottom of the building, you need to lay a layer of gravel 15 centimeters thick. After that, a drain pipe is installed. After the concrete has hardened, you can continue building the shower room.

Most summer residents have a desire to bathe in the shower after excavation. The procedure has a positive effect on human health. You can of course buy a shower from finished form... But this will increase construction costs.

It's cheaper to make a shower on your own, without the help of specialists. The water must drain at a certain slope. Do not forget to carry out waterproofing work on the shower. With the help of a waterproofing film, you can prevent the appearance of bad smell... To do this, you need to lay a special mesh. The recommended drain hole depth is 2 m.

To preserve heat, you must install on top of the tank polycarbonate roof... It will create a greenhouse effect. A mandatory element of the tank is a sensor that informs the user about the water level. In the absence of water, they can burn out. Therefore, it is necessary to constantly monitor this parameter. To equip a shower floor, you need to install drain pipe.

What if there is no running water in the house? To fill the tank, you have to drag the water in buckets. This is too time consuming method. Before building a shower, consider a water supply. If there is running water, you can fill the tank quickly enough. Just turn on the tap and wait for the container to fill up to a certain level.

Advanced homeowners have come up with a scheme that automates this process. This can be done using a float system. It is imperative to provide for the installation of a system that is designed to drain excess water. According to the law of physics, the warmest water is on top. Therefore, water intake is carried out from above. At the bottom of the tank, you can install a hose to drain the water into the sewer.

Of course, you can use the energy of the sun. At the same time, you do not have to spend money on electricity. However, this method has a significant drawback. It is difficult to warm up large amounts of liquid with the help of the sun. In addition, this method cannot be implemented in all climatic zones.

In this case, you can take advantage of heating using devices that use electricity. The heating elements can heat the water to the required temperature. The person who decides to take a shower sets himself temperature regime.

In order for the warmest water to enter the watering can, a piece of foam must be attached to the hose. Therefore, water is taken from the top. To speed up the heating of the water, you can make a coil.

A shower can be built at the farthest end of the site, near the fence. On sandy soil, water will not linger in the sump. Thanks to the rapid absorption of water, rotting of wood materials used as cladding materials can be avoided.

When a shower is erected near the fence, the owner gains an advantage. In this case, it is enough to install 3 pillars. So that the pillars do not stagger, it is necessary to dig holes 78 cm deep, fill everything with rubble, tamp and fill it with concrete.

After leveling the floor, proceed to wood processing. You can buy aspen boards and soak them protective layer... Then the lumber is processed with a grinder.

Consider the weight of the barrel when installing the shelves. It must be able to withstand a load of at least 100 kg. Corners will rust with use. To increase the service life, the metal frame is painted with a special paint that can be applied directly to the rust.

You can use self-tapping screws to install polycarbonate. Violation of technology can lead to cracking of polycarbonate sheets in sunny weather.

Therefore, people prefer a summer shower equipped with a heating system. To get a convenient and practical design, you need to pay great attention to the construction site. Draining after a shower can lead to colds. With the help of heating elements, you can heat water to a certain temperature even in cold weather.

There must be a distance of at least 5 meters between the shower structure and the drain pit.
TO earthworks you can go only after calculating the volume of the drain pit. One person accounts for 0.5 cubic meters.
Observe a slope of 3 to 5 degrees when laying pipes.

The simplest design of a drain pit is considered to be the shape of a cube. But this option has a significant drawback. The walls of such a pit lose strength.

It is best to use a cylindrical drain pit. In this case, the load is distributed evenly and the probability of failure decreases. In order to increase the life of the shower structure, it is necessary to use bio-based products. Many bacteria are capable of recycling waste. The water will be absorbed faster into the soil.

The advantage of a plastic tank is that the water does not bloom in them, the joints do not rust, and the properties of the water do not change.

Electric heaters can be supplied with my own hands... However, it is best to purchase a ready-made tank equipped with a built-in heater. In this case, the system controls all parameters in automatic mode... The unit has a control panel and shuts down on its own in case of emergencies.

There is high humidity in the shower. Therefore, during construction, the following points must be taken into account:

Instead of an iron pallet, it is advisable to use plastic ladders. They provide good air circulation and prevent water stagnation.

It is recommended to put a garden shower on a personal plot in the following cases:

the country house does not have engineering networks... The lack of running water significantly complicates the arrangement of a stationary shower in the room;
the garden house is used only for short-term rest during the summer period. If you build a shower cabin in such a room, then big problems with preparation for its negative temperatures. It is necessary to completely remove water from the system, prevent pipelines from freezing, etc .;
in order to save energy. Water for garden shower can only be heated by sunlight. If there is a desire to expand the functionality of the shower stall, then you can connect electric heating, but use it only in unfavorable weather;
financial resources do not allow the construction of expensive capital bathrooms.

The presence of a garden shower significantly increases the comfort of rest in a suburban area, you can wash in it after working in the beds, etc. It is impossible to list everything in one article possible options arrangement of a garden shower, each owner can make his own changes depending on preferences, skills, characteristics of the relief of the site and financial capabilities.

In order to make it easier for inexperienced builders to choose the best option for a garden shower for themselves, we give a table of the most commonly used structures with brief description their characteristics.

Name of the structural element	Technical description
Frame	It can be made of wooden blocks or rolled metal. The dimensions of the bars are approximately 50 × 50 mm; for the manufacture of side stops, strips of at least 20 × 30 mm are used. It is better to make a metal frame from pipes of a square or rectangular profile with a size of at least 20 × 20 mm.
Sheathing of external surfaces	All lining options are suitable, including natural. Profiled metal sheets, honeycomb or monolithic polycarbonate... The cheapest options are polyethylene film or thick fabric.
Water drainage	Some options may have special septic tanks, while most do not require drives. Several tens of liters of water are quite successfully absorbed into the soil, especially if its composition belongs to sandy or sandy loam species.
Water tanks	Both metal and plastic containers are used. The best option- buy shower containers in specialized stores. The minimum volume of the container is 100 liters, the external surfaces must be painted black.
Water heating	Sun rays or combined with the use of electric heating elements. A specific choice is recommended taking into account the climatic zone of residence and the time of use of the shower.

Garden shower

The construction of a shower consists of several stages, their observance allows you to avoid many troubles.

Stages of building a garden shower

The conditions for placing a garden shower listed below will increase the comfort of its use, reduce the amount of construction work and increase the time of use. These conditions are considered universal and must be taken into account in the construction of any construction option.

Location. The shower should be located in a well-lit place garden plot, very desirable on a hill. If the land is sandy or sandy loam, then this arrangement will make it possible to do without a septic tank or dirty water storage.
The distance between the shower and the residential building should be kept to a minimum. It can adjoin outbuildings, a garage, etc. The main thing is that after water procedures there is a place for shelter, which will exclude the possibility of hypothermia in unfavorable weather.
Methods for filling a container under water. In all cases, the distance from water sources to the shower stall should be small.

After the issues with the location of the structure have been resolved, it is necessary to determine the size and type of construction, materials of manufacture. As we mentioned above, the choice is huge and depends only on the owner of the site.

It is possible not to build a frame, but to place a shower head on one of the walls of existing buildings, having previously taken special measures to protect it from moisture. There are options for placing a shower rail on open space(vertical support, tree branch, etc.).

An original solution - the water tank is installed on the ground, and the supply is provided using a special device, the so-called "treadmill". It looks like a rubber mat with built-in water supply pumps. They alternately need to be pressed with your feet, water is sucked out of the container and fed into the shower head under pressure. Exercise and shower at the same time. An excellent option, can be installed anywhere in the suburban area. To equip such a garden shower, you do not need any construction skills, materials, or time.

In this article, we will dwell on two more complex, but also more comfortable options. To erect these structures, you need construction material and a little time and experience. Frame materials - wood or profiled steel. Standard sizes constructions 100 × 100 cm around the perimeter and 220 cm in height. Reducing is not worth it, it will be inconvenient to wash. If you want to do in your soul separate place for changing clothes and storing bath accessories, you can increase the perimeter of the structure.

Step-by-step instructions for building a shower with a wooden frame

Step 1. Make the markup concrete slab grounds. To facilitate the drainage of water, it is recommended to leave a depression in the middle of the shower for the natural absorption of moisture. The fertile layer should first be removed from the ground, sprinkled sand pillow 10-15 cm thick, compact and level the platform.

Step 2. Prepare the formwork. You need to make two square boxes. One with a square side of about 100 × 100 cm, the second inner one with a square side of about 60 × 60 cm. The height of the formwork is at least 10 cm, for manufacturing, use boards with a thickness of about 20 mm and a height of 10–15 cm. If you are afraid that the boards will bend under load concrete, then reinforce the formwork around the perimeter with wooden or metal pegs. Check the corners with a square, the formwork can be assembled with ordinary nails.

Step 3. Place the formwork on the prepared site, check its position. The small box should be placed exactly in the center of the large one.

Step 4. Prepare concrete for pouring. For manufacturing, you need cement, sand and gravel in a ratio of 1: 2: 3. The accuracy of the proportions does not matter much, the strength is quite enough for small loads. Pour concrete into the formwork, level the upper surface horizontally using a flat batten. Allow about 10 days for the mortar to set.

Step 5. Dismantle the formwork and start making the frame. It will require bars with a size of 50 × 50 mm or more, the amount of material is easy to calculate. It is necessary to add the length of four to the sum of two perimeters vertical posts.

Step 6. Make a base for the uprights. You can connect the bars in half a tree; a jumper should be made in the middle of the base, it will serve as an additional support for the wooden shower grill. Make sure that all corners are straight; you can connect the bars with nails or self-tapping screws. The base bars (frames) should lie approximately in the middle of the concrete slab, the specific dimensions do not matter.

Important. Be sure to soak the base with an effective antiseptic several times. It is not necessary to lay waterproofing between the frame and the concrete, it will only harm. The fact is that water gets onto the insulation from above and cannot be absorbed into the concrete. As a result, wooden structures are in contact with water for a long time.

Step 7. Saw off the vertical racks to size, you need 4 of them. It is better to saw with an electric hand saw, if it is not there, then you can use an ordinary hacksaw.

Step 8. Begin installing the uprights. For fixing it is better to use galvanized metal corners. They greatly simplify and facilitate the work and guarantee the proper stability of the structure. It is impossible to install vertical racks on your own, involve an assistant. Temporarily fasten the racks with any pieces of boards, in the future they will be replaced with real stops. Constantly check the verticality of the racks, use a level.

Step 9... Make a second square out of the bars, the dimensions are identical to the first, a water tank will be installed on it. If the container has a large volume, then you will have to put several additional jumpers, the distance between them depends on the size of the container.

Step 10. Use the corners to secure the top square to the uprights. Check all elements of the frame with a level, correct errors if necessary. You can put wooden wedges at the joints, this will not affect the strength and stability of the structure.

Step 11. Remove temporary spacers and install permanent ones one at a time. Use the same blocks as for making the frame. The length of the spacers should be equal to the distance between the vertical posts, saw the ends at an angle of 90 °. For fixing, use the same galvanized metal corners. Spacers are the most critical part of the frame, take all measures to ensure maximum strength.

Step 12. The frame is ready - start trimming the side surfaces. Any material is used for cladding. To enter, you can make doors or use a retractable curtain. If the sheathing is solid, then windows should be provided under the ceiling. Leave the usual holes, you can close them with glass or foil. Sheathing cuts on outer corners it is recommended to close up with smooth edged boards.

Step 13. Place a container with water on the roof of the frame.

Practical advice. If you plan to take a shower in rainy weather, then the roof should be covered with a piece of metal profile, and a hole should be made under the outlet of the shower head.

Step 14. Color wooden surfaces durable paint for outdoor use.

You can install electric heating elements in the tank for heating water, but you must certainly follow the rules of the PUE.

Step-by-step instructions for building a shower with a metal frame

To make the frame, you will need a metal profile pipe, a grinder, welding machine, tape measure and level.

After manufacturing, metal surfaces are recommended to be protected from corrosive processes with paint for outdoor use. The amount of metal is determined based on the dimensions of the frame, as we described above. It is better to use a purchased water container, according to its dimensions, the length and width of the structure are adjusted.

Step 1. Draw a sketch of the wireframe showing the length of each element. Take your time, think carefully about ways to strengthen the uprights. To strengthen the loaded nodes, you can use pieces of sheet metal with a thickness of at least 1 mm. Prepare squares or triangles from it with a side of 10-15 cm. Make sure that the angle is right and the cuts are even.

Step 2... Cut off the workpiece with a grinder. It is necessary to cut in compliance with all safety rules, the grinder is a very traumatic tool. If you have many of the same parts, it is recommended that you first accurately measure and cut one, and then use it as a template. This improves the accuracy of the elements.

Important. Make sure the cut-off wheel rotates in the desired direction. At correct installation sparks should fly off in the direction of the master, but for some it is inconvenient to work this way and they change the direction of rotation. It is very dangerous, during the bite, the grinder is thrown at the worker, which can cause serious injuries. It is impossible to hold the tool with your hands, the ejection force is too great.

Step 3. Start welding the frame. In order for the weld to be strong, maintain the welding conditions. The electrode thickness and current values depend on the profile parameters. For the frame, it is sufficient that the pipes have a wall 1–2 mm thick; such rolled products have the required physical strength and will fully withstand the load of a water tank. For welding, we recommend using an electrode Ø 2 mm, make sure that the slag is evenly blown off the surface of the molten metal and the seam is continuous.

How to weld the structure correctly?

Prepare a flat work area, the dimensions should be such that the largest elements can fit freely.
Place two parts to be welded on the work table, check their position under a square. As we already mentioned, the angle should be right, and the parts should lie in the same plane.
Grab the parts on one side, the tack is no more than a centimeter long, let the metal cool down. During cooling, the knot will lead to the side, the correct position will be violated.
Adjust the corners with a hammer, turn the parts over to the wrong side. Check the dimensions and position again.
Carefully weld the parts on the other side, you can now make a seam along the entire length.
Flip the assembly over again and make a full weld on the tack weld. Simultaneously weld metal pipes from all sides.
Remove slag from the seam surface and check the quality of the weld. If there are large shells, then re-suture.
Remove sharp streaks of metal with a grinder.

Thus, you can independently prepare two side planes of the frame, it remains to connect them into a single structure. It is very difficult to do this alone; it is better to call an assistant. One will hold the elements, and the other will weld them. It is necessary to constantly check the corners, do not rush. Practice shows that alteration of an incorrectly welded frame always takes much more time than a careful check of the dimensions and spatial position during the procurement of structural elements.

It is better to make vertical racks and a platform for a tank from a rectangular or square pipe, with the same dimensions as a round one, they have significantly better characteristics of physical strength in bending and compression. As bridges, in addition to sheets in the corners, you can use any wire rod, square or reinforcement. There are still pieces of a profile pipe of sufficient length - use them.

Step 4. At the bottom, weld the area under the sheathing boards. The dimensions do not matter, it is intended only for an emphasis. The grille can be made non-separable or assembled from individual elements... For manufacturing, take smooth lumber, the thickness of the boards or slats should withstand the weight of the washable. If you have thin materials, make some jumpers for them.

Step 5. Place the frame in place of the shower. It could be concrete site or ordinary temporary stops made of stone. The second option is preferable for several reasons. Firstly, there is no need to deal with earthen and concrete works... Secondly, at any time, if necessary, the shower can be moved to another place.

Metal frame - old wire-wound grille

If at the bottom of the vertical struts, the legs are welded with support pads made of sheet steel. The dimensions of the platforms are approximately 20 × 20 cm, which is sufficient to guarantee the stability of the structure. Such a platform makes the shower more mobile when transporting; installation requires only a little leveling of the ground under the support platforms, this work takes several minutes.

Practical advice. Many are worried about water drainage. If your booth is located next to the entrance of the house, and everywhere on the personal plot sidewalk paths, it is recommended to make a dirty water accumulator. If the shower is located at the back of buildings, then you can not waste time and effort building bends. For hygiene procedures, 10-15 liters of water is enough for one person; such a small amount will be absorbed into the ground without any problems. For complete peace of mind, you can dig a hole under the shower for 2-3 car tires, water will accumulate in it. After transferring the frame, the tires are removed, and the pit is covered with earth.

Step 6. Level the cabin, make sure that the racks are strictly vertical, and the platform for the tank is horizontal.

Step 7. Clean the surface metal structure from rust, oily stains and dirt, check the stability of the frame with your hands. Everything is normal - you can start painting. Choose the color of the paint as desired, the main thing is that it is suitable for staining metal surfaces and for outdoor use. Do not be too lazy to paint very high quality, use brushes, carefully rub the paint into the frame. If one layer is not enough for an even coverage, then you will have to repeat.

Metal frame coated with primer

Step 8. Place a container under water on the upper platform, attach a shower head. If desired, you can make an additional outlet to collect warm water for various household purposes.

Water supply through a tee with taps on branches

If there are no doors in the cab, and only a plastic curtain is hung, then the wind can blow it inside the cab. This creates certain inconveniences while taking a shower. There are several ways to correct the situation:

Attach to the curtain at several binding points. Enough two about the middle of the height.
Hang any pendants next to the plastic curtain. The main selection criterion is weight. The heavier they are, the better they will hold the curtain.

If there is a desire to increase the comfort of taking a shower, then it is better to attach a door. For its manufacture, you can use both sawn timber and rolled metal. The design of the doors is elementary, they are hung on the side vertical supports.

During the manufacture of the frame, think about this moment, it will take a little material and time, and the convenience of using the shower will increase significantly. The compartment also needs to install wood grates for the legs.

Silicone mat to prevent slipping on wet boards

If children will use the shower, be sure to install a shower head with a flexible hose for them. Position the tap for switching the water supply at such a height that children can reach it without any problems on their own.