Making an apron for a kitchen set with your own hands. How to choose and install a do-it-yourself kitchen apron

In any apartment, the kitchen, in addition to its utilitarian meaning, also has a special sacred meaning - there is a “hearth”, here the family gathers for dinner and not only, here they exchange impressions about the past day, share their thoughts, sometimes arrange friendly gatherings, etc.

There are no trifles in this space, and the question of how to make an apron in the kitchen sometimes becomes very difficult, given modern possibilities.

Kitchen apron - materials for its device

So, an apron is a vertical zone located between the work surface and the wall cabinets of the kitchen, or, alternatively, in their absence, the entire wall. In fact, this is the central zone, which attracts maximum attention. However, this is an area that, due to its location, is constantly polluted.

Therefore, the choice of material and the question of how to finish an apron in the kitchen must be approached from two sides: it must be a practical and durable material that can withstand constant washing, cleaning, including chemicals, and also it should fit into a single design concept of the kitchen room, please the eyes of the household.

Ceramic tiles - traditions and classics rolled into one

The favorite, although slightly shifted from the pedestal, remains ceramic tile. She is preferred not only for practicality. Modern tiles characterized by high aesthetics, a variety of textures, patterns, sizes, shapes, color solutions. If the kitchen is equipped gas stove, the question of how to make an apron in the kitchen is often solved by itself, since the tile is fireproof.

The main disadvantage, due to which other materials are preferred, is the rather complicated installation process and the time factor. In addition, if you want to replace it, a serious repair of the entire room will be required.

As an option for ceramic tiles, you can use decorative or facing types brick or a natural stone. For bricks, especially for those types that are problematic to clean, a glass surface can be installed over the masonry or covered with a transparent varnish, painted with acrylic paint.

Use of decorative panels

When ordering kitchen set experts can advise on how to properly make an apron in the kitchen from MDF. This is enough a budget option in addition, its installation does not take much time and does not require special skills. It is attached either to the frame with brackets, or to special glue..

Often such an apron is a continuation of the kitchen set and forms a single whole with it. The color scheme is chosen either to match or contrast. But over time, he may somewhat lose his original appearance, besides, he is afraid of open fire.

The apron can also be made of plastic, the price of which is quite low. But the material is short-lived, easily scratched, and it should be protected from fire and heat exposure.

mosaic apron

A mosaic apron is a real work of art, but it is very difficult to manufacture, so you need to invite a specialist. All its advantages are the same as those of ceramic tiles, only it is worth paying special attention to the seams, since they are quite large area surfaces.

For them, it is necessary to choose especially durable and moisture-resistant compounds, as an option - epoxy grout.

Modern design options for the kitchen

Glass options are gaining popularity, which have a huge design potential: behind them you can stick photo wallpapers, make collages from photos, etc. The material has no particular shortcomings. It is environmentally friendly, easy to care for, the only thing worth considering is to use only tempered types of glass..

If there is a desire to move away from tendentiousness, you can arrange a mirror version. It will be especially good indoors. small size, allowing you to visually expand the space or add light.

A high-tech kitchen is unlikely to do without a metal apron. But it requires constant and careful care, all grease stains and smudges are visible on it.

Is it possible to make a kitchen apron yourself

If you know how to do kitchen apron, then with some experience in construction or repair work it is easy to install it yourself.

Apron devices in the kitchen made of ceramic tiles and decorative bricks

To fold the ceramic tile apron, you will need some tools:

tile cutter or angle grinder ("Bulgarian");
spatula with teeth;
rubber spatula;
worth stocking up sandpaper, sponge or soft cloth.

Materials:

ceramic tiles or decorative brick(laying technology is almost identical),
glue,
grout composition.

Advice. Work should begin when the wall is free from wall cabinets, tables and other things are moved away.

Beginning of work:

remove all sockets, insulate the wires, if necessary, drill a place for new ones and bring the wiring there;
it is imperative to prepare the surface of the wall - level, plaster or putty, if necessary, treat with waterproofing solutions, etc., depending on the initial state of the wall;
then marking is performed, based on the fact that the distance between working surface and wall cabinets is 50-60 cm;
mark up the layout of the tiles. If you need to lay out a pattern, it is better to fold it on the floor beforehand in order to take into account all the nuances and make adjustments to the layout calculations;
drawing a horizontal line of the bottom row and a vertical one, which is determined from the center, which, as a rule, runs along the center of the stove or hood.

Laying tiles on the wall:

when preparing the adhesive mixture, it is worth considering the speed of work and kneading only the amount that does not have time to harden before it is used. Informs the instructions for the composition in more detail;
using a notched trowel, a layer of glue is applied to the surface of the wall; try to keep the tool at an angle to the surface. You can pre-apply the adhesive composition with an ordinary spatula, and then walk with a notched one - such a lightweight option will help even beginners in this business to lay tiles with their own hands;
laying begins then the center of the bottom row, first in one direction, then in the other. The tile must be gently but firmly pressed against the wall;
after the row is laid out, it is necessary to remove excess glue and move, thus, up;
if an ornament, pattern or panel should be laid out, you need to start from this area;
be sure to form seams between the tiles with “crosses” of the appropriate width;
the extreme tiles or near the sockets need to be cut or cut; for this, a tile cutter or “grinder” is used.

Seam processing is carried out no earlier than the next day:

prepare the grout mixture;
with a rubber spatula, gently apply to all seams, carefully filling them, hard-to-reach places experienced craftsmen sometimes they process with their fingers, since the spatula has nowhere to turn around;
after complete drying of the grout mixture, its remains very gently, using a damp sponge or soft tissue removed from the tile surface.

All this will not take so much time, since making an apron in the kitchen turned out to be not so difficult.

Advice. When marking, be sure to add 5 cm from above and below to enter the cabinets, in width, as a rule, it goes 15 - 20 cm beyond working area

Panel apron options

You can independently cope with the device kitchen apron made of MDF, plastic, metal. Many who have not yet decided which apron to make in the kitchen can stop at the glass option, which provides great opportunities to show their design talents.

Installing it is not difficult, the main thing is to follow some rules for the work:

be sure to perfectly align the wall;
installation is carried out only after the installation of kitchen furniture;
take measurements, even division into zones is practiced, for example, in the central part under the hood, the apron should be slightly higher;
order elements in the workshop with obligatory grouting for a snug fit, glass thickness is at least 6 mm and must be tempered;
the background is chosen to your taste, you can use paintings, photo wallpapers, reproductions or make it yourself, showing your artistic talent;
stick the background on the wall using the appropriate adhesive compositions, it is most convenient to work with a self-adhesive film;
glass elements are applied to the wall in order to correctly mark the places for mounting holes;
holes are drilled with a drill or puncher into which dowels are installed under metal mounts and they themselves;
the panels themselves are hung on the mounts and fixed with wide decorative caps.

Conclusion

So the important problem is solved, what kind of apron to make in the kitchen and how to do it yourself. Now the room has acquired a completely different sound and look. Ennoble and decorate the interior of the house under the power of many. If you have any questions, you may find the answer in the video.

If you mount an apron for the kitchen with your own hands, you can save money. In the kitchen, the surface between the countertop and the top drawers gets dirty the fastest. water splash, greasy spots, scale, fumes, temperature changes spoil the appearance of the wall.

Installing a tile apron

The kitchen is a corner where the family often gathers, and sometimes a large company. The monotonous atmosphere spoils the mood, but you need the kitchen to look cozy and attractive.

The interior of any room can be diversified with bright details, and the kitchen can be decorated with an interesting apron.

Even with little experience construction works, the amateur master will be able to fulfill his dream. Ceramic tiles, MDF, glass, metal, mosaic - assortment modern materials huge, but you need to choose it correctly.

Do-it-yourself apron for the kitchen can be made quickly and efficiently, if you first watch the installation video and study the photo of the design options for the room.

You can demonstrate your taste and talent as a designer, make the kitchen original, bright and attractive.

The most common option is to lay out an apron for the kitchen from tiles, which are durable and beautiful in appearance.

Need to prepare the following materials and tools:

tiles;
glue;
primer;
grout;
putty knife;
gloves;
cross stitches.

Work begins with the preparation of the wall surface: it must be perfectly flat.

To install tiles with your own hands, you first need to desired height fasten the slats so that the tile lays flat. You need to start gluing from the corner and from the bottom.

Apply glue with a spatula and firmly press the tile to the wall. To make the seams even, you need to install 2 crosses on one side. The necessary holes are cut out under the sockets with a grinder.

Finishing work consists in grouting the joints with paste. After 2 days, the tiles can be washed.

Ceramic tile apron - classic version, which is well-deservedly popular with buyers.

Installation of MDF panels

An apron made of MDF panels can be quickly assembled with your own hands, because the work is not very difficult.

The panels have different shades, can imitate natural materials and different images. They can be mounted on a normal surface without special preparation, and fastening can be done with self-tapping screws, screws or liquid nails.

Tools used:

screwdriver;
electric drill;
roulette;
liquid Nails;
self-tapping screws;
plugs;
putty knife;
screws.

Liquid nails are applied to the wall and panel, and then the tile is pressed firmly against the wall.

You can fix the MDF apron with dowels or screws. First, a frame is installed wooden slats which are fastened with dowels. Then, using self-tapping screws, panels are installed on the frame. The caps of the screws are closed with decorative stoppers.

Sometimes holes are drilled in the panels and fixed to the wall with screws. Screw heads are closed with special plugs.

Installation of skinali (glass aprons)

Apron made of glass - spectacular and original decoration kitchen interior.

Advantages of glass apron:

a large number of options;
ease of installation and dismantling;
long service life;
visual increase in space;
affordable price;
good compatibility with any furniture and kitchen accessories.

Tempered glass apron, called skinali, is an original and latest invention.

To install a glass apron, you need the wall to be perfectly flat, because the glass can burst on uneven surface, therefore, work begins with leveling the wall.

Measurements must be taken very accurately. They need to be removed after placing the top and bottom drawers of furniture, because then it will be difficult to redo something.

Glass can be fixed on photo wallpapers or you can order a drawing according to your project in the workshop. The most expensive method is to print the pattern on a special self-adhesive film.

For fixing glass panels Use wide head screws. It is better not to drill holes in glass panels on your own, but to entrust the work to the specialists of the workshop where the apron was made.

Tempered glass is difficult to work with and requires skill to work. The cost of skinali depends on the number of holes for fasteners.

It is important that the ends of the glass panels are well sanded and no joints are visible during installation. Very carefully, you need to cut out the holes for the switches, which are usually located in the work area.

Apron made of glass fits well in kitchen interior. The lighting of the glass looks very impressive, which gives the room even more chic. The apron does not require complex care, it is enough to periodically wipe it with a wet and then dry cloth.

Kitchen aprons made of glass give the kitchen a cozy and special flavor.

To achieve the original result, you need to take into account a number of parameters: general style kitchen design, design, Decoration Materials kitchen set, the compatibility of individual elements.

How to make a mosaic apron?

Mosaic can easily highlight the work area. It looks spectacular, but styling can be difficult. It is important to know the installation features in order to avoid mistakes.

The main thing is to carefully prepare the wall, putty the bumps, cover the surface with soil.

Better to buy tiles reinforced mesh or a self-adhesive mosaic that can be quickly mounted on a degreased wall surface.

Now they sell ready-made mosaic squares, which are easily attached to a special glue. No need to glue each tile separately. This option greatly simplifies the process and saves time.

Need to cook:

roller;
level;
putty knife;
glue;
scissors;
tiles;
putty;
primer;
grout.

The tile is attached either with special glue, or without it. The glue is applied with a wide spatula, evenly distributed over the surface, waiting for the right time and applying the mesh with the mosaic to the wall.

After the material is completely laid, the seams are rubbed with a small spatula.

The mosaic looks bright and colorful, so you need to use no more than 3 colors, even if they are pastel colors.

This apron has a lot of seams, but it looks modern and stylish.

Summarizing

Kitchen apron can be mounted from various materials. To save money, you can do the work yourself. You just need to be patient and read the installation instructions.

A beautiful and practical apron in the kitchen, installed with your own hands, will for a long time delight in its uniqueness and originality.

After updating the kitchen set and the interior in general, you need to think about protecting the walls above the work surface. Many decide to make an apron in the kitchen with their own hands. In order for the efforts expended not to be in vain, you need to choose the right material, design, determine the dimensions and correctly install.

Your kitchen will become stylish and unusual with an original apron

Choosing an apron

Depending on the style of the room, as well as available funds the type of future apron is determined. The following parameters are taken into account here:

wall dimensions;
colors;
operational characteristics;
master skills;
type and cost of materials.

The width and height of the apron in the kitchen are determined by the contours of the furniture. If used sheet material, seams and joints on the surface can spoil general form. The colors should match the design of the furniture, walls, floor and type of decor. Universal option - white or beige tones. A plain apron is simple and unobtrusive. You can create patterns or simple drawings, order photo printing or choose finished material with the image you are interested in.

Strength and wear resistance largely depend on the type of material. Here's what you can make an apron in the kitchen:

oilcloth;
wallpaper;
tiles and mosaics;
decorative rock;
glass and mirror;
metal;
decorative panels.

The most expensive are mosaic and UV printed tempered glass.

The apron is in harmony with the interior of your kitchen

Features of arranging an apron from various materials

In order to decide what stone or glass to hang, it is worth considering in more detail the features of each type of apron. It is worth noting that the wallpaper is rarely used on its own. Durable vinyl samples are an exception, but it is recommended to use a protective screen made of glass or transparent plastic in any case.

Most cheap option- oilcloth for the walls in the kitchen. It is glued to the wall, nailed or furniture stapler. The service life of such a panel is relatively short, but oilcloth is ideal as a temporary protection for the wall.

Ceramic tile

One of the most popular options is ceramic tiles. Advantages of tiles:

durability;
strength;
water resistance;
chemical inertness;
simple care;
wide range of.

The tiled design of the apron differs in color, the presence of a pattern or a schematic ornament, the size of the masonry elements, their location, etc. With the help of a tile of a certain format, you can visually expand the space.

For a good fit, you need cement-sand mortar and prepared surface. Distortions and height differences should be eliminated as much as possible. To be able to install an apron separately from the wall, you can glue ceramic tiles to chipboard. This will also solve the problem of leveling the base.

Right choice design: bright, stylish, original

Mosaic

An alternative to ceramic tiles is mosaics. Its range is no less extensive. Mosaic is made from the following materials:

ceramics;
glass;
a rock;
metal;
plastic and acrylic.

The first three varieties are predominantly used. Mosaic panels consist of a set of separate fragments. They can be connected with a mesh or paper base.

The interior looks original, where. Due to the high cost, the purchased mosaic is replaced with home-made from broken dishes, old tiles and other similar materials. Installation of such an apron is lengthy and requires skill.

beautiful stone

Stone apron suitable for classical style and country. The surface is visually rough. Gluing a decorative stone is beneficial in terms of its durability and interesting appearance. The downside is the price of the product. Also, the matte porous surface is able to trap dirt. Embossed apron is difficult to clean from drops of fat. Glossy polished samples are easy to clean, but they remain splash marks and fingerprints.

This option is suitable for finishing the kitchen, where hob not used very often. Otherwise, you need to take care of a powerful hood that will catch splashes of grease and partially protect the panel from contamination.

The most common and inexpensive option cladding

Laminated MDF panels

Quite affordable option is an apron made of laminated MDF panels. A laminate or plastic is applied to the surface of a thin sheet of material. Often they choose the same color as for the countertop. Gluing the panels is very easy, just enough liquid nails.

A big plus is the ability to choose an MDF sheet that is suitable for the format, since the height of the apron for the kitchen sometimes goes beyond standard sizes lining. Splashes will be visible on the laminated surface, but they can be easily removed with a rag and glass cleaner. quality material unaffected by such chemicals. When using abrasives, there is a risk of scratching the panel.

Risks of rapid wear are associated with contact with high temperatures. Above hob the coating may deteriorate and deform. Cheap laminate will fade over time and may flake off with frequent contact with water and steam.

Due to the relatively low cost, the panel can be replaced after a while. This will also allow you to update the interior without significant costs and the need for extensive renovations.

Glass

The most popular type of apron in modern interiors- glass or skinali. Glass advantages:

strength;
durability;
wear resistance;
decorative;
simple care;
water resistance;
heat resistance and fire safety;
chemical resistance.

Your kitchen is beautiful and relatively inexpensive

For the kitchen use tempered glass or triplex with a film layer. The panel can be transparent and protect the main wall covering, plain, have a film pattern or a photo print.

Gives a special effect LED lights panels.

The original solution is to glue the mirror to the chipboard. Such a panel expands the space, looks interesting, but quickly gets dirty. To maintain beauty, you will have to rub the mirror daily.

Do glass apron with your own hands, you can use vinyl film, oracal or photo wallpaper. The thickness of the glass must be at least 5 mm. You can attach a glass apron in the kitchen with glue, but this is an unreliable method. It is better to buy special fittings. Hidden mount organized according to the principle of support rails and hinged clamps. Unhardened material can be drilled, which allows it to be fixed with special rivets.

Metal

Metal is rarely used. Basically, this material is suitable for high-tech style, where stainless steel is a clear favorite. You can glue metal to glass with liquid nails or sodium paste. Such panels are durable, but not very diverse in terms of design.

Sizing

For purchase the right amount material, it is necessary to determine the dimensions of the surface being trimmed. The following indicators are taken into account:

apron height in the kitchen;
panel length;
the distance from the wall to the furniture.

The design of your kitchen will completely transform the room and make it more spacious and lighter.

The standard dimensions of the working area range from 1.5-2.5 m in length. V modern apartments these figures may be higher, it is necessary to proceed from an individual project.

The height of the kitchen apron has clearer restrictions. The standard distance between the lower and upper cabinets is 60 cm. In some cases, it can be less - up to 45 cm, and also more - about 65 cm.

Separately, the height of the kitchen apron from the countertop to the hood is calculated. This indicator largely depends on the model of the hood, its dimensions and power. Models built into the cabinet allow you to hide part of the wall, and separately installed options require the continuation of the apron to the very top of the headset.

How to properly install and make an apron with your own hands: laying and installing tiles, sticking discs

The type of material used directly depends on how the kitchen apron will be fixed to the wall. In order to glue the glass, liquid nails are used or the panel is fixed on special fasteners. Tiled materials placed on the solution. You can glue a decorative stone on glue with a cement base or polymer. Mixtures are sold in the form of a powder or a finished plastic mass.

Kitchen with an apron: unusual, bright and original

Consider how to make a tiled apron for the kitchen with your own hands:

The surface of the wall is leveled and primed. If tiles are laid on chipboard, a deep penetration primer is used.
The surface is marked with allowances for gaps.
The adhesive is applied with a notched trowel to the wall or the tile itself.
The element is applied to the control mark, pressed and leveled.
A gap is established between adjacent tiles using plastic crosses.
After drying, the seams must be rubbed. Ideally, an epoxy mastic is used. Joints with furniture are treated with sealant.

WATCH VIDEO

Properly selected material and competent installation is the key to a successful job. A homemade apron will serve you for more than one year and will delight you with its appearance.

12 options for a kitchen apron made from improvised materials are very budgetary, easy and fast! They're all simple, cheap, and can be made (or removed) in literally minutes, making them ideal for renters or anyone looking to change their backsplash.

And so we will analyze what to make an apron for the kitchen from and what materials are used for installation.

Such panels allow you to conveniently place the necessary kitchen utensils hanging them in any place you choose on the wall.

you need to attach the panels to the walls,
and then insert hooks from the store into the holes household appliances, and their location can be constantly changed depending on your needs.

Apron from photo frames

To make an apron in the form of a photo gallery, you need:

thin piece of plywood,
covered with fabric, on which small nails are nailed (or screws are screwed in)
and in frames with photographs are removed.

And the little gallery in the kitchen is ready!

Paper or card apron

See how wonderfully combined an apron made from a glued world map with a white kitchen furniture. Really easy way make your kitchen original! How to do:

cut off thin piece of plywood before exact size walls, glue paper on top,
and then apply varnish(so that the paper does not get wet from moisture and steam in the kitchen).
When it dries, attach the plywood to the wall.

Cards were used here, but you could use wrapping paper, comics, magazine covers, whatever.

Can attach frequently used recipes to the kitchen wall, this will save you from having to look for them if necessary, and will bring an interesting touch to the design of the kitchen. You can also attach your favorite quotes or poems.

Vinyl oilcloth

Vintage white tablecloth with blue floral pattern will help create a charming kitchen apron. The kitchen immediately becomes more cute and cozy.

Apron made of wood or MDF

Wooden boards add notes rustic style. To make such an apron, you will need a thin piece of plywood exactly the size of the wall. All boards are cut to length and attached to plywood, and then the whole thing is screwed to the wall.

How to DIY:

To create such an apron, wooden planks painted white,
and then cut into equal pieces (like the size of tiles).
After that, all the "tiles" are attached to a thin piece of plywood to the size of the wall, and then the plywood is attached to the wall.

And another option for screen painting:

Also painted walls can be decorated additional elements decor. For example, this kitchen apron was painted using stencils, and then glued on top of hearts that blend wonderfully with the chosen pattern:

Love the tile pattern, but don't feel like doing the tiling? Then try options for its imitation. For example, here is a wonderful example of a painted white tile. All you need is paint and accurate wall markings.

Tile

Create a mosaic apron with your own pattern using small tiles different colors. For example, in this case, dark brown floor tiles were needed.

You can also create a mosaic pattern by breaking large tiles into smaller pieces before attaching to the wall. The result is similar to the previous one, but more chaotic, without clear lines.

If you like more strict shapes and colors, then pay attention to this combination of small tiles in white, brown and gray:

When using a very small tile, it seems that the colors pass into each other, shimmer. In the example in the photo, a dark color scheme is chosen, but with such a tile you can experiment even with the brightest colors.

The shape of the tile has a great influence on the result, for example, taking a hexagonal tile instead of a square one immediately achieves an original effect. It is especially good to take a hex tile that has some color transitions, like here from white to gray:

With the help of tiles, you can also achieve a 3D effect. To do this, lay the tiles not side by side in a joint, but going on top of each other, creating volume. For example, as in this case:

The very concept of an apron for the kitchen has recently been used by Russian designers, although the idea of facing one kitchen wall washable materials for decades. And this decision is fully justified. It is completely rational, because soot, grease and dirt are the constant companions of cooking. Even the most clean hostess met with stains of fat in the kitchen. They appear during the cooking process, and the kitchen cannot be protected from these types of pollution.

The task of the kitchen apron- make the area subjected to the maximum "load", easy to clean and wear resistant. Grease and odors quickly eat into different kinds coverings, turning into an untidy place. Getting rid of grease stains, for example, is very difficult. Often, various products containing abrasive particles are required. And such a "hard" approach can lead to scratches on the surface of the apron. That is why it is worth special attention approach the choice of materials.

How to make an apron in the kitchen from plastic panels?

This material can be called one of the cheapest and easiest ways to make an apron in the kitchen with your own hands. Plastic - perfect option for an economy class kitchen, as well as for apartment owners who plan to make repairs in the next 3-5 years.

Main advantages of this material: low price , ease of installation, wide choice of colors and pollution resistance. To return the plastic to its original appearance, it is enough to wipe it with a fur coat with detergent, grease and dirt easy to wash from a smooth surface. Another advantage can be moisture resistance this material. But on this, perhaps, the list of "pluses" can be closed. Plastic panels are not the best way for finishing the kitchen, especially the apron. They do not tolerate high temperatures, so they can warp or even melt near the stove. In addition, plastic loses its color, and white panels turn yellow over time. And, of course, it is worth noting weak material strength. On him dents remain, and you can break through the panel quite by accident.

But the installation will not take you much time. First you need to attach the rail at a height of 80 centimeters from the floor. It must be even. Plastic panels will be joined to it. They can be installed both horizontally and vertically. The second way can be called the simplest. The panels themselves are attached to liquid nails. After installation, all edges are closed with starting strips.

How to make an apron in the kitchen from tiles?

Traditional option design of the apron has stood the test of time. Even in ancient times, kitchen stoves were lined with ceramics. Now ceramic tiles protect walls from dirt. The only disadvantage of this method is the laying of tiles. If she released large sheets, then there would be no problem, but technological features manufactures limit the possible size of the tile. And this means that it will not be possible to avoid butt joints. Bacteria multiply in them with pleasure, mold finds its “home”.

Advice. Purchase only high-quality modern grouting materials that maintain the hygiene of the seams.

First you need to level the walls to make the tiling process as easy as possible. After that, the masters recommend calculating what size the apron should have. Traditionally, it starts at a height of 80 centimeters from the floor and is about 70 centimeters high. The width of the apron depends on the size of the kitchen and the kitchen set itself.

Via building level draw a straight line at the desired height. The first row of tiles will be laid along it. It is best to fill a plank of wood or a metal profile along the line, so it will be easier to lay the first row.

Prepare the adhesive according to the instructions on the package and start laying the tiles. Do not forget to keep the same distance on the seams. To achieve this, use the "crosses". Consumption: one "cross" for four tiles. After that comes the turn of grouting. Pick up suitable remedy and dilute it according to the instructions. For grouting, it is best to use rubber spatulas and a big sponge. Do not forget to promptly remove the remnants of the mixture until it has frozen.

If you want to know how to make an apron in the kitchen with your own hands, the video will help you understand all the intricacies of the process:

How to make an apron in the kitchen from glass?

This material is considered one of the very best for the design of a kitchen apron, as it is highly durable and easy to install. Glass can be washed various means, it does not absorb odors. The only problem is the manufacture of glass sheets. They need to be ordered right away. increases the price similar apron.

To begin with, carefully calculate the dimensions, because you will not have the opportunity to “file” the canvas on the spot. Then take care of the background. It can be the most common, pasted under glass. Or special film made to your order.

You can fix the panel either using a conventional metal profile (it is installed around the perimeter of the apron), or using fasteners with wide caps.

Fasteners are inserted into prepared holes in the wall, then glass sheets are strung on them, and then the whole structure is fastened with wide caps.

How to make an apron in the kitchen from MDF?

The main reason for using MDF is its availability. This material inexpensive, easy to install and does not require home master special skills. It is only necessary to correctly calculate all the parameters and dimensions of the apron, apply the selected shape to the MDF sheet, not forgetting about the sockets. After that, a panel for an apron is cut out of the sheet, which can be attached to the wall.

The easiest way is to use the same technique as when installing tiles or plastic panels. A profile or rail is nailed along the line, along which you can navigate. Above it, a panel is attached to liquid nails. After the installation is completed, the rail is dismantled.

It is worth noting that the apron made of MDF - not the best option for the kitchen, since this material is combustible, affected high temperatures and react negatively to humidity.