Master kitchen remodel. How to update a kitchen set and its facades with your own hands: interesting ideas and useful tips

Sooner or later, any household item wears out and needs to be replaced or improved. It is the restoration of kitchen furniture that is exactly the type of repair that everyone can do with their own hands, without using expensive materials or technologies.

If your kitchen set still regularly performs its declared functions, but you began to notice that:

• the body of the furniture is still strong, meets all the necessary requirements, but appearance furniture facades leaves much to be desired;
• individual pieces of furniture have become unusable from external influence- the countertop is cracked and deformed, traces of hot or fatty spots have formed on the surface;
• the headset is simply outdated and tired;
• you do not have the opportunity to spend money on buying a more modern kit.

It is in this case that restoration is necessary. Do-it-yourself kitchen furniture repair is a very real way out of the situation.

Restoration options

There are many ways to give old furniture smart, updated look. Depending on your own creativity, you can create a real masterpiece of design art from an unremarkable typical bedside table. Or you can just tidy up outside kitchen set. Our tips will help you bring your ideas to life, no matter how complex.

Self-adhesive film

Simple and inexpensive option repair. It is applicable when you want to quickly and inexpensively update the appearance of furniture facades. To date, dozens of self-adhesive options of different quality, colors, different price... Self-adhesive vinyl films are durable, resistant to moisture and temperature extremes, they do not lose their color and do not fade. In order for the film to evenly and efficiently cover the surface of your furniture, first remove the facades, remove the fittings and degrease the surface. Having spread the boards on a horizontal plane, carefully remove protective layer while flattening the film with your hand or a spatula. Air bubbles that appear can be removed by carefully piercing them with a thin metal needle.

If you did not succeed in gluing the film correctly the first time, do not use the spoiled piece anymore. With repeated use, the connection of the material to the surface will be even worse, and your furniture will take on a sloppy, sloppy look. A photo of the kitchen unit, restored with self-adhesive tape, can be seen in the selection.

Interior Stickers

Perhaps, The best way to restore small, local defects in furniture. You can choose stickers of different sizes and contents. To decorate a kitchen set, drawings on a restaurant theme are suitable - bright fruits, berries, sweets or beautiful dishes. Such stickers are a kind of self-adhesive film, but of a reduced size. The principle of application is the same - we remove the protective layer and gently spread it on the degreased surface of the furniture. If necessary, drawings can be easily removed using special alcohol-based degreasers.

Decoupage

Decoupage is the most creative way tidy up the old kitchen furniture do it yourself. The decoupage technique dates back to 15th century Germany. Although the name of this method is French and literally means "cut". This is the basic principle of the process - we cut out pictures and put them on the surface. Anything that has a sufficient plane can be decoupled. It can be dishes, clothes, books, decor items or, as in our case, kitchen furniture. It is not difficult even for a beginner to make such jewelry. You need to choose a base to your liking. These can be pictures from magazines, photographs, paper napkins. Kitchen cabinets decorated with old newspapers look very original. Apply some special decoupage glue to the facade and distribute the clippings as you like. After complete hardening (about 8 hours), the surface must be varnished.

Decoupage will be an interesting solution. kitchen table clippings from culinary publications. Then, sipping your evening tea, you will not only relax, but also spend your time with benefit, comprehending new secrets of the art of cooking. Photos of a kitchen decorated using decoupage technique are presented below.

Wallpaper

If you have chosen this option for restoring kitchen furniture at home, take your furniture photo wallpaper seriously. Don't forget that the kitchen is the place high humidity and constant temperature drops. Thus, materials for the restoration of old furniture must be durable, moisture resistant, and not emit any harmful fumes under the influence of hot air. Wallpaper on vinyl based having an additional protective layer. There is no need to choose a photo wallpaper with a silky or linen texture for a kitchen set. Such materials can quickly absorb odors and wear out when constant contact... Better to decorate the kitchen with wallpaper with a smooth surface - it will be easier to maintain.

If your headset is located in a room with low ceilings, use wallpaper with an elongated silhouette, for example, with towers, tall trees or flowers on long stems, in the furniture decor. All this will help to visually increase the height of the room.

Installing a new tabletop

The countertop is one of the most commonly used pieces of kitchen furniture. It is on it that we cut food, beat off meat, here we put heavy dishes or kitchen utensils. In general, the countertop is exactly the piece of furniture set that we cannot do without. Of course, not every material is capable of undergoing such a strong load for a long time. Therefore, in order to restore functionality and beauty to our work surface, we are updating the worktop. This can be done in several ways:

• decorating with ceramic tiles - clean well wooden surface, with help grinder eliminate all irregularities and defects. After that, apply special glue and lay out the mosaic. The type and thickness of the tiles depend on your preferences, but there should be only one installation method - very tightly, leaving minimal gaps. After the glue has dried and the surfaces are firmly seized (this will take at least 6 hours), grout the joints. If desired, it can be varnished on top - this will add additional attractiveness and serve as a protective layer;
• glass and fillers are an option for extraordinary, creative personalities that try to make every centimeter of space original and different. Gently glue several wooden slats placed on the edge. Thus, divide the area into several sectors. Fill the pockets with fillers. The filler can be coins, beads, pebbles, shells or other small objects of the same shape. On top of all this beauty, lay toughened impact-resistant glass. Fix or glue it - the original table is ready without special costs... Photos of countertops with filler can be found in the selection with examples;
• painting and varnishing is the easiest and most familiar way for most of us to repair an old countertop. Remove any remaining lacquer from furniture with sandpaper, degrease and cover the entire surface acrylic paint... To give this simple process a bit of variety - paint with stencils. They can be purchased at any hardware store. After the drawing is dry, open it with varnish. If you want to leave the wooden thing in its natural, natural shade, use a stain.

Replacing the facade

Replacing the facade of the furniture is a way for those who are not satisfied with the restoration of the facades of kitchen furniture on their own. Factory furniture often has interchangeable elements. Therefore, it will not be difficult to find new facades at a furniture warehouse. The main thing is to correctly measure the old furniture structures. If you have not found suitable products on sale, you will have to place an order on an individual basis.

Although this repair method is the most expensive, it is still several times less than the cost of a new kit. By updating the facades of furniture in this way, you will get an almost new kitchen set, saving money.

A person is designed in such a way that he needs to periodically update the situation. If finances allow, then this can be done by buying new furniture. But if the family budget does not allow such expenses, then simply update the facade of the old headset with a self-adhesive film.

With its help, you can give furniture a new look and eliminate defects that appear during its operation.

V Lately self-adhesive film designed for various furniture, is becoming more and more popular.

To give your furniture an unforgettable look, you need to choose the right self-adhesive decorative film. Modern industry offers different options of this material. From cheap polypropylene and polyethylene models to practical PVC claddings.

Each potential buyer can count on a variety of textures and colors.

It can be noted strength and durability, maximum safety in use, a variety of design options.

In addition to the material that forms the basis of the film for furniture, you need to pay attention to the presence of a protective layer. In the kitchen, such a layer is important to protect against high temperatures and high humidity. If self-adhesive film is used for pasting children's wardrobes and tables, then the protective layer plays an important role here.

It will help to protect furniture from careless handling of the child.

If direct sunlight falls on the headset, then cover it with a cladding that has a layer that protects against ultraviolet radiation. Can be purchased today transparent models with such a layer.

He, without hiding the facades, will protect them from fading.

The presence of a protective layer adds to this material additional cost... But, without it it is impossible. If you are going to use the cladding in the bathroom, be sure to make sure that it has high degree moisture resistance.

The coating can be matte or glossy, imitate various materials.

Pasting of objects located next to heaters, stove and other similar devices is carried out using a self-adhesive film based on a thermally stable polymer.

The modern assortment has an amazing variety, so you will definitely find suitable option for yourself.

The decorative layer can be made for stone, ceramics, fabric and wood. Suitable for furniture are "wooden" cladding or marbled material. Recently, photomurals have been popular.

Especially if they are used for pasting wardrobes.

In addition to furniture, old doors, glass and even walls are suitable for processing with such material. The surfaces glued in this way can be easily washed.

Even a material that does not have moisture protection easily tolerates short-term contact with a wet sponge.

How to glue furniture over with self-adhesive foil

One of the advantages of this material is the ability to work with it yourself. No need to look for specialists and pay for the service. You yourself can easily cope with this task.

You can successfully use self-adhesive type film to protect your table, windowsill in any room, countertops and kitchen furniture.

The most an important milestone facade processing is preliminary preparation surface.

After cleaning the surface from contamination, it must be degreased. Thanks to this procedure, it is possible to avoid the appearance of folds during the pasting.

As a means for degreasing the surface, any detergents or an alkaline solution.

After preparing the surface, we proceed to cutting the material. Sheets must be cut with a margin. This makes them easier to stick to the surface. If you need to take into account the pattern, then a margin of 2-3 cm is required. Without it, it will not be possible to accurately fit the drawing. Excess pieces are neatly cut off after the furniture has been pasted.

For the convenience of cutting the material, manufacturers print a centimeter scale (grid) on its reverse side.

It is not difficult to stick the self-adhesive film.

If it was not possible to exclude bubbles, they are easily removed by piercing the lining with a thin needle. After gluing, the puncture site will not be visible.

Nuances that may appear when using self-adhesive film

Pasting flat surfaces will not cause problems for those who first encounter such work. Difficulty can arise when pasting corners. And here you can use a trick.

To make it easier to bend the corners of the sheets, you need to take an ordinary handheld hair dryer and heat the material with it.

It is also difficult for a person who first encounters a self-adhesive film to compile sheets of material. To prevent a gap from forming, the sheets must be glued so that the next sheet overlaps the previous one by 1.5 cm. Then we apply a ruler to the central part of the allowance along the entire length. And along it, with the help of a sharp knife, we make an incision.

Remove the unnecessary strip. The joint will be perfect.

Lighting is important when working with this material. If it is not enough, then it is easy to miss minor flaws. They will become visible against the general background or in bright light.

With the help of the film, you can create unique interior and decorative solutions.

If you have purchased a self-adhesive tape that adheres too quickly to the surface and is difficult to work with, use powder or talcum powder.

Powder the surface over the entire area and you will have no difficulty in fitting the sheets.

How to remove self-adhesive film from furniture

Removing old cladding from furniture sometimes becomes a problem. If the material is of high quality, then it will not be difficult to remove it. But, if you are unlucky, and it is very difficult to remove, then heat the surface. Use the same hairdryer.

Warm up the material with it, and it will be removed without much difficulty.

Adhesive tape- it's inexpensive modern material, which will help to update the appearance of furniture and protect it from moisture and ultraviolet radiation. It is not difficult to stick it on. The main thing is to do everything carefully and follow the tips described in this article.

Now you know how to ennoble and protect furniture and various surfaces with self-adhesive film.

VIDEO: How to stick the film on the table with your own hands.

How do I upgrade my closet? If you have a closet in your apartment that has lost its original appearance, but which you would like to update, then you can do it yourself with minimal financial costs. You can update the front of the cabinet, repaint the entire cabinet in a different color, or cover it with self-adhesive foil.

Decorating the cabinet with ceramic tiles looks impressive and stylish, but it is possible only if the doors are securely fastened.

Old kitchen cabinets or cabinets can be refurbished with wallpaper leftovers, paint film leftovers, or other affordable and inexpensive methods.

How to update a cabinet with self-adhesive tape?

One of the easiest ways to renovate a kitchen cabinet is to cover it with self-adhesive tape. You can choose a material with wood, marble, a natural stone or skin.

This appearance will give the kitchen cabinet original view... Vinyl film is moisture impermeable, resistant to temperature extremes and mechanical damage, is durable and has a long service life.

Materials and tools:

• self-adhesive film;
• scissors;
• sharp knife;
• scraper;
• roulette.

Decorating cabinets with self-adhesive foil is a simple and functional solution, the foil is quickly applied and has moisture-proof properties.

First, you need to measure the kitchen cabinet, its facades, sides, drawers. To do this, the doors can be removed and positioned on a flat surface. Then you need to remove the handles and other accessories from the cabinet. After that, you need to clean the surface from dirt using a damp sponge.

Grease stains should be removed especially carefully. After cleaning, the surface should be perfectly flat and smooth. Irregularities and deformations can be eliminated with sandpaper. If the surface is uneven, the film may come off and wrinkle after application. Dry the surface after cleaning.

You may be interested in: Concrete and fake diamond: countertops

Then, on the reverse side of the film, you need to apply the dimensions of the cabinet parts. 1-2 cm are added to the main dimensions for the stock. Where the film will bend, you need to add 2 cm. If the film has a pattern, you need to arrange the parts so that the pattern matches.

After making the patterns, the material is cut with a sharp knife and a ruler. Bends are cut with scissors.

Stickers on individual parts of the facades will refresh the interior of the kitchen.

Then they begin to paste over the facade of the cabinet with self-adhesive film. Unstick small area protective paper from the film, it is glued to the surface. A plastic scraper smoothes the material, removing wrinkles and air bubbles. Details are glued gradually, removing paper cover With back side 10 cm films and spreading the material with a scraper.

If irregularities do appear in some places, then in this area the film must be peeled off and re-glued. The film is finally glued on after a few hours. During this time, all irregularities and deformations can be eliminated.

Then the sides of the cabinet, drawers and shelves are pasted over with foil. After that, you need to replace the cabinet handles with new ones. Other accessories are also replaced. Then the updated cabinet parts are put back in place.

If you need to update not the entire front of the cabinet, but only its individual parts, then you can make vinyl stickers. These stickers are made from quality material, they are quite durable and practical, easy to clean and do not require frequent cleaning.

Back to the table of contents

Renovation of cabinets by replacing facades

Materials and tools:

• cabinet facades;
• screws;
• screwdriver;
• loops;
• drill.

A variety of fronts for a kitchen set gives room for imagination.

You can replace old facades with new ones. These can be ordered from furniture making workshops. Facades can be made from inexpensive wood, plastic or chipboard.

You may be interested in: Kitchen countertop: how to choose the right one?

Ready-made facades can be installed by hand. First you need to remove the old doors by removing the hinges and unscrewing all the screws with a screwdriver.

Holes for the hinges must be drilled in the finished doors. Then the cupboard doors must be fixed in place with screws.

Back to the table of contents

Updating kitchen cabinets with molding and staining

Materials and tools:

• decorative strips;
• drill;
• glue;
• saw;
• screwdriver;
• pens;
• deck paint;
• marker;
• spray gun.

The use of molding will give simple doors nobility and style.

You can update the design of your kitchen cabinets with paint and sticker. decorative elements(molding). Small strips with a semicircular section are used as moldings.

Before removing the facades, you need to make notes with a marker so that you can then install all the elements correctly. Then you need to clean the entire surface with a damp sponge. Then the parts need to be dried.

It is better to paint on the street, as paints and varnishes are toxic. The facades must be placed on a surface prepared for work.

Then, using a saw, the necessary molding parts are cut out. The edges of the planks are cut at an angle of 45 degrees. The molding is glued to the doors.

After that, the places where the handles and screws are installed are marked. The necessary holes are made with a drill.

Wardrobe painting followed by stencil painting is for the creative and the brave.

Then the surface is primed. The primer is applied with a spray gun. After applying the primer, you need to wait an hour for it to dry completely.

Then the surface is painted. To do this, the spray gun is filled with deck paint and applied to the surface from a distance of 15 cm. Then, to create an ornament or patterns, take the necessary stencils. If deformations remain after the paint dries, paint the surface again.

Then the facades are installed in their place. Screw the screws with a screwdriver to the places marked with a marker.

You may be interested in: How to make a folding table?

After that, new handles and fittings are screwed on.

The long-term use of the kitchen sooner or later makes itself felt: no matter how high-quality the set is, over time it loses its experienced appearance. And then you have to choose: buy a new set or update the kitchen with minimal cost... Many stop at the second option, namely, they update the facades with a special film.

Kitchen before:

Kitchen in an intermediate state: buy a new one or renew the facades?

Traces of glue are visible on the right - the consequences of an attempt to repair the headset.

Options for "new things"

Since the headset itself is not yet falling apart, it is necessary to update the facades. This will benefit both the appearance and protect the material from moisture. There are two options for updating facades:

1. Ready-made self-adhesive film
2. Individual photo printing on adhesive paper

The owner of this kitchen settled on the second option, and then indulged in reflection on the topic of photo printing. The original version with a separate picture for each door was rejected: general form it will turn out to be too colorful. After some thought, it was decided to choose a print with nature, the "breaking" of which with an apron will not affect the perception of the picture.

When looking for a suitable print, the picture should be selected with the maximum resolution - only in this case it will not be blurry.

Getting Started

The owner of the kitchen took advantage of the simple method: searched for pictures using the word "nature" with a resolution of at least 40 megapixels.

This option turned out to be the most suitable, but with minor amendments: it was decided to remove the huge butterfly. This is how the print should have looked in the kitchen.

A sketch was made in a photo editing program, for a clear understanding of what would be lost from the drawing. The butterfly has been replaced with grass.

With this picture, you can safely go to an advertising agency. The print was chosen with lamination, so that after the renovation of the facades, they could be washed.

It is necessary to print at a slightly increased size so that it is possible to glue the ends and wrap the film inside.

After that, you can proceed directly to pasting the facades:

1. Knowing the dimensions of the door, it is necessary to throw 1-2 cm on each side for the ends and another 1-2 cm for the fold.
2. Cut off the picture of the required size.
3. We degrease the door and remove all irregularities.
4. Gently glue and smooth.
5. We make holes for the handles and install them.

Use a hair dryer as is the case with car wrap it is forbidden: the film is deformed.

The most tricky part- door corners. You can paste over them in two ways, here is already a matter of taste:

1. Butt
2. Overlap

The corners should be pasted over with the utmost care, since the self-adhesive film will not adhere to the superglue.

During the renovation of the kitchen, it was decided to unload the plate drying shelf from the lids accumulated there by hanging them on the doors from the back. To do this, you need to purchase ordinary hooks and fasten them with any in a convenient way.

To prevent the self-tapping screws from being visible under the film, the holes for their installation must first be pierced, i.e. make holes for their embedding.

The final stage of updating the headset was the doors under hob which were not originally there. The doors were made from 5mm. plywood. With a special desire, you can assemble the whole headset from plywood with your own hands.

Deficiencies in pasting can be removed with a blade, but for this you need to wait 1-2 weeks: then the film will finally take its place.

The refrigerator can be the hardest piece to hang around. Get ready for the fact that the film will have to be repeatedly removed and pasted again, fortunately, it allows this. It is very problematic to get rid of small bubbles, so it is better to expel excess air after the process is completed with a needle.

Conclusions and prices

Several conclusions from the facade renovation:

• The film can be washed and rubbed.
• It holds up very well, it can be removed with great difficulty.
• The corners of the doors are the weakest points.
• The film is easily scratched.

The costs of such a kitchen renovation turned out to be as follows: about $ 120 for a print on self-adhesive with lamination and about $ 90 for plywood, hooks and handles. When buying regular film, the budget can be reduced significantly.

Photo

Now we propose to look at a few more photos with the renovation of the facades of the headset with minimal costs.

Video

If you decide to update your kitchen with self-adhesive, do not be lazy to watch the video on its sticker. This will save both time and nerves.

Photo: vk.com, yaplakal.com, liveinternet.ru

It's time to freshen up the kitchen, but the purchase of new kitchen furniture is not yet included in the family budget? How to upgrade a kitchen set with minimal costs? In such cases, professional designers and decorators advise replacing the old countertop and facades with new ones, repainting the “familiar” facades in a different color or pasting them with self-adhesive foil, and renewing the fittings. The most interesting thing is that a light facelift of old kitchen furniture can be done with your own hands using simple improvised means.

There are ways that can change a boring kitchen set almost beyond recognition.

How to update a kitchen set: self-adhesive foil

The easiest way to transform old kitchen furniture is to cover it with self-adhesive tape. Cheap and cheerful! Choosing a high-quality film with imitation wood, marble, tiles, natural leather or stone, you can give your kitchen, if not exclusive, then a very dignified appearance. Waterproof vinyl film, its resistance to high temperatures and mechanical stress will keep pristine beauty your design impulse. If you know how to handle a centimeter and scissors, you shouldn't have any particular difficulties with a film facelift. The main thing you need is accuracy and patience.

Necessary materials:

• adhesive tape
• centimeter
• ruler
• sharp scissors
• stationery knife
• plastic scraper for smoothing

The easiest way to transform old kitchen furniture is to cover it with self-adhesive tape.

Step-by-step instruction:

Step 1: We measure the kitchen cabinetry cabinets: facades, sides, drawers... For better quality and comfortable work it is advisable to remove the facades and lay them on a flat surface.

Step 2: Remove the handles and the rest of the hardware. Wash all cupboards and drawers with a damp sponge, Special attention giving away fat stains. There should be no traces of grease, dust or other contaminants on the surfaces to be glued. It should be perfectly flat, clean, dry and smooth. Otherwise, during operation in problem areas the film will begin to bubble and move away from the surface. After wet cleaning, be sure to wipe all cabinets dry.

Step 3: On the back of the self-adhesive, there is a centimeter grid on the protective paper layer, which makes cutting and cutting the film much easier. We celebrate required dimensions every detail. If all measurements are taken accurately, it is still advisable to leave a margin of 1-2 cm. In places where there will be bends, add 2 cm. If you chose a film with a repeating pattern, follow along the front side so that the pattern repeats coincide.

Step 4: We cut it with a clerical knife along the ruler. We cut out curvilinear patterns with sharp scissors according to preliminary marking with a marker or pencil.

Kitchen set covered with self-adhesive foil with graceful pattern, immediately acquires an exquisite and unusual view

Step 5: After peeling off a couple of centimeters of protective paper, apply the film to the facade with the adhesive side. Smooth out the glued area with a plastic scraper in order to remove air bubbles and other irregularities from under the film. We do not glue the film all at once, but gradually removing the protective paper by 5-10 centimeters and carefully smoothing each section covered with a scraper. Do not hurry! Any bumps and irregularities will be especially striking on a plain surface, but on a variegated ornament they are less noticeable. Smooth out the film from the center to the edges. Small air bubbles under the film can be pierced with a thin sewing needle, and large ones we cut with a sharp knife and smooth the film.

If the film is uneven when gluing, do not panic! It's not the end of the world yet. The case is fixable! The self-adhesive tape will only take a few hours to permanently adhere, so you have enough time to remove the tape from the failed area and re-apply it.

Step 6: We carry out similar operations with all the other facades of the kitchen unit, as well as shelves and drawers. For a complete transformation in quality final touch we change furniture fittings, in particular handles, but new ones and return the facades to their places.

If you just need to add a pair bright accents, to refresh the interior with new colors and nuances, it is enough to use interior vinyl decals... They can be applied to any furniture with smooth facades, they are made of durable material, so they perfectly tolerate wet cleaning and do not require careful maintenance.

Most radical way kitchen unit renovation - replace old facades with new ones

How to update old kitchen furniture: replacing facades

Need a massive budget redesign? Replace old facades with new ones! This is not only the most radical, but also the most expensive way to update old kitchen furniture, but it will still cost significantly less than buying a new kitchen set. If you have a modular kitchen or a model that is still popular, it will not be difficult to purchase ready-made facades. For exclusive and out of fashion models of kitchen sets, it will be necessary to make facades according to individual order, since there are plenty of firms providing such services today. When ordering a facade, you can choose for your kitchen not only original design, but also optimal material in relation to "price-quality". Economy options: inexpensive wood (usually pine), chipboard, plastic. A more solid new thing: facades made of MDF and solid wood.

For exclusive and out-of-fashion models of kitchen sets, you will have to make custom-made facades

The installation of new kitchen facades can be entrusted to specialists who will certainly be found in the same company that made them, or you can install them yourself. To do this, remove the old doors by unscrewing the screws and securing the hinges. Pre-made doors and drawer fronts are usually sold raw in stores, so you will need to fine-tune them with a standard 35mm hole drill. Having drilled new holes for the hinges, we fasten the doors to the walls with screws. Ready! Modern furniture assembles quickly and easily. Anyone who has ever had to do home repairs will successfully cope with the installation of new facades.

How to update the facades of a kitchen set: molding and painting

Renovation of the facades of old kitchen furniture with molding and painting - uncomplicated and effective method

A great way to quickly and easily redesign old kitchen furniture is to use molding and paint. What is molding? These are decorative overlays that are widely used for decoration different surfaces and structures such as walls and ceilings. Take a look around! Surely all sorts of moldings are present in your interior. To decorate the facades of the kitchen set, we need thin semicircular strips.

Necessary materials:

• wood glue
• decorative semicircular molding
• Miter saw
• HVLP spray gun
• glossy deck paint
• drill
• furniture fittings
• screwdriver
• marker

Step-by-step instruction:

Step 1: Prepare the facades. Before removing the facades, we make appropriate digital marks on each door and cabinet so that nothing is confused during installation and everything is returned to its place. We dismantle the facades, remove the fittings and fasteners. We carefully remove all dirt with a damp cloth. Wipe the facades dry with a dry cloth. Since we will be using paints and varnishes, it is advisable to carry out work not indoors, but outdoors in a well-ventilated covered place, for example, under a canopy. Work surface cover with foil and lay prepared facades on it.

Step 2: Installation decorative molding... Using a miter saw, cut the decorative molding into pieces of the required length. Saw the outer edges at an angle of 45 degrees. We glue the finished planks to the facade, "planting" them on wood glue.

Step 2: Installing the decorative molding is a simple but neat operation

Step 3: Mark with a marker the places for installing fittings and fasteners. We drill holes with a drill or perforator.

Step 4: Priming the surface. Fill the paint reservoir in the spray gun with a primer. Apply the primer from a distance of 15-20 cm. Wait about an hour until it dries completely.

Step 4: priming the surface before applying paint

Step 5: painting. When the primer is completely dry, fill the spray gun with deck paint. We paint in the same way as a primer at a distance of 15-20 cm. To create an original pattern or ornament on the surface, you can use special stencils. If, after the finishing layer of paint has dried, irregularities and other imperfections are noticeable on the surface, apply another layer of paint for a flawless result.

Step 5: Painting is done in any convenient way - with a brush, roller or spray

Step 6: Installation of facades. There is no trace of the old facades! Go guess what to attach where. It's good that we took care of this in advance. Focusing on the digital designations on the facades and cabinets, we return each door to its original place using screws and a screwdriver. Installing new fittings and admiring the creation own hands!

How to update an old kitchen set with your own hands: decorative inserts

After renovating your kitchen, your old kitchen set doesn't fit in with your new environment? No problem! The case is fixable! The design of old kitchen furniture will help to update the design of the kitchen interior. decorative inserts from wallpaper, self-adhesive film, ceramic tiles or rattan.

Unusual way renovation of the kitchen unit - the use of ceramic tiles as decor

We decorate kitchen furniture with ceramic tiles

How to facelift an old kitchen cabinet with ceramic tiles? Easy peasy! We remove the kitchen cabinet doors from the hinges, thoroughly clean the surface, paint it in a suitable color if desired. Using tile glue, we glue the tiles to the facade. To make everything look as neat and beautiful as possible, we create a frame of decorative molding around the “tiled applique”. All in all and business!

To make everything look as neat and beautiful as possible, we create a frame of decorative molding around the "tiled applique"

We decorate the facades of the old kitchen with rattan inserts

Necessary materials:

• rattan canvas
• sharp scissors
• decorative wood planks
• furniture stapler
• acrylic lacquer
• small furniture nails without caps
• sandpaper
• hammer
• brush

Kitchen fronts decorated with rattan inserts immediately take on an exotic look

Step-by-step instruction:

Step 1: We measure the front of the doors to calculate how many meters of rattan cloth we need to purchase for finishing. The canvas can be bought in the form of ready-made rolls or cut, which will be much cheaper.

Step 2: Put a roll of rattan cloth in a bath and thoroughly moisten it with cool water. We leave it for about half an hour so that the material is well saturated with moisture. When wet, rattan increases slightly in size. After installation and complete drying, the canvas is stretched like a string.

Step 3: While the rattan "reaches the desired condition", we prepare the wooden planks that we need in order to press and attach the rattan canvas to the facades around the perimeter. The color of the frame should be in harmony with the interior of the kitchen and new decoration headset.

Step 4: If necessary, the color of the planks can be changed by covering them with acrylic lacquer in a suitable color. Apply varnish to the planks and dry. To remove roughness, fine-grained sandpaper we carefully grind the painted workpiece. After sanding, apply a layer of varnish again, dry and sand again. For a perfectly smooth surface, apply 3-4 coats of acrylic varnish.

Step 5: Taking out the rattan cloth from the bath, roll it out on an equal surface and cut it out taken measurements... The doors can be completely closed with rattan cloth, but facades on which only the middle is decorated with rattan look much more interesting.

Step 6: Using sharp scissors, cut out the blanks from the rattan fabric. Via furniture stapler attach them to kitchen facades... We place the paper clips along the edges, then they will be closed with strips and will be invisible.

Step 7: to make the frames on the facades beautiful neat joints, we place the planks in the miter box and file the outer edges at an angle of 45 degrees. We blot the sawn areas with a brush with acrylic varnish.

Step 8: With furniture studs without hats, we nail the strips to the facades along the edges of the rattan cloth so that they cover the paper clips.

Designers consider various types of rattan inserts effective way redesign of kitchen furniture