How to use a furniture stapler: device, work, advice. How to correctly insert staples into the stapler Furniture stapler styer how to charge

Not sure how to properly fill a large stationery or mini stapler? Read the article that details this process.

The stationery stapler is a stapler for paper and files. You cannot do without it either in everyday life or in the office.

To use it, you need staples, without which the stapler will not work.
Staples are divided into sizes: No. 10, 26/8, 26/6, 24/8, 24/6. Their numbers are indicated on the packaging.
On the packaging of the stapler itself, the numbers of staples that fit it are indicated.
It seems that everything is simple - insert the staples of the right size into the stapler and you can start using.
But many people have trouble charging this device. How to do it correctly, read the following article.

So you've bought staples and want to charge your stapler. How do I open and thread a large stationery stapler with staples? Description in the form of instructions:

Peel back the plastic stapler cover that is held by the spring. Opening the roof pulls a spring with it. The free space is the staple groove. Many large staplers have latches that need to be pushed back.
Take the staples- one section. Insert them into the groove with the ends facing down.
Close the stapler cover.
Click it once without paper. If a paper clip with bent souls falls out, then the stapler is working.

Advice: If the staple that has fallen out is bent incorrectly or it did not fall out at all, then repeat the procedure or buy another stapler, it may be due to a malfunction.

You can watch the video to learn how to properly thread the stapler. A visual demonstration will help you cope with this process quickly and easily. In addition, the video tells you how to fix a stapler.

Video: how to fix the stapler and charge the stapler?

Mini staplers are easier to refuel than large similar staplers. Lift the plastic cover up and back. The staples can now be inserted into the groove. After finishing the refueling process, close the stapler and use.

Advice: Mini staplers have a very small staple compartment. Therefore, if you want to get out old staples or insert new ones, then you will need tweezers.

Often the mini stapler can jam during filling. To fix this, open the cover and adjust the staples in the groove. If this is not done, the stapler may become unusable. Watch the video on how to fill out the mini stapler correctly.

Video: How to install staples in a stapler?

Video: stapler_stapler.AVI

Using a stapler without any nails, materials of small width and density can be stapled. It is an indispensable tool in the office, construction and furniture industries. In this article, we will figure out how to insert paper clips into the stapler.

Stationery staplers

These tools are very simple and designed for the average layman who is not versed in technical "troubles". Everything is simple here. You flip the top cover - and the spring with the pressure mechanism moves back. You insert a clip of paper clips with the points down and close the lid. The clamping mechanism returns to its place, and the tool is again ready for work.

Those interested can watch a video in which the boy shows how to do this correctly.

Construction staplers

They are more massive and have a slightly different structure, although the principle of operation is the same. The spring-loaded clamping mechanism pushes the clip to the impact mechanism, after each actuation, the next clip takes its starting position and, as a result of pressing the spring-loaded key, the impact mechanism drives it into the right place, thereby pressing the next sheet of cardboard to the wall with a clip, the material to the wood from which the frame is made upholstered furniture, or only for the formwork of the future concrete foundation. Let's figure out how to insert paper clips into a construction stapler.

Wrong option

The mistake of many is that when the stapler runs out of staples, they, pulling back the double-sided lugs of the frame lock, open it and try to insert the next clip of staples through the front part from the side of the striking mechanism. As a result, with an awkward movement, the spring mechanism now and then throws the clip back, and it flies away many meters, after which it is necessary to search for it for a long time. Often the clip can fly into the eye of the hapless "stapler operator". Here is a video showing how not to do it, although the operator himself does not know about it.

Correct option

The correct way to insert staples into a construction or furniture variety stapler is to press on the back of the spring-loaded staple holder to release its slot from the lock hole and pull it out completely. After that, you can even insert more than one clip into the frame and return the spring of the mechanism to its place, thereby ensuring its uninterrupted operation for a long time. Here's a video on how to do it right.

The frame should be opened as in the first, incorrect case, only when one of the paper clips gets stuck in the exit slot.

We hope our article was useful to you. Enjoy your "recharge"!

A stapler (translated from the English "stapler") is a necessary thing in everyday life and at work. The stationery stapler is prepared for stapling sheets and files. There are five types of stapler: manual, manual office, desktop horizontal or vertical, stitching, typographic. They all differ, before each in the number of sheets that can be sewn at a time.

You will need

- stapler;
- staples.

Instructions

1. Determine what type of stapler you have. To do this, see how many sheets you can stitch at one time. The most primitive devices are pocket staplers. They are prepared for stapling up to 10 sheets. Manual office ones have a special indentation on the fingers and allow you to staple up to 30 sheets. Desktop horizontal or vertical have a rubber or plastic sole, they can sew up to 50 sheets. In stitching, it is allowed to staple up to 150 sheets, and printing ones, having a maximum stitching depth, bind up to 250 sheets at a time. The specificity of stapling is through fastening, which you carry out with a metal staple. The staple pierces the sheets to be stapled through, and its ends abut against the plate located at the end of the other side of the stapler.

2. Before loading the stapler, determine the size of the staples that suits it. Staples (which are also called staples) are of several types: No. 10, 26/8, 26/6, 24/8, 24/6. These numbers are written on the packaging. Staples must be packed in cardboard boxes of 500, 1000 or 2000 pieces. Which of the above is right for your stapler, you will find out by looking at its packaging.

3. In order to load the stapler with the selected staples, bend its cover. It is connected by a spring to a plastic element, the one that presses the staples against the opposite edge of the metal groove, in the one that holds the staples. Opening the lid will pull the spring and, consequently, the plastic element, thus freeing up space for new staples.

4. Take one section of staples and place them in the metal groove, ends down. Close the lid and click to sample with the stapler once. If a staple with concave ends fell out of it, then you did everything right, if this did not happen, or the staple was bent abnormally, then repeat the procedure, or change the stapler.

How staples can be inserted into a stapler

Before answering this question, let's take a quick look at the features of the tool and consumable. In particular, there are 3 types of staplers:

mechanical (manual);
pneumatic;
electric - network and battery.

It should be noted that this is the main classification, but there are others here. For example, this instrument is divided into 2 groups - professional and household. In addition, depending on the purpose, they distinguish office, construction and furniture. Each type is designed to perform specific tasks. For homework, a household tool is quite enough, because you will only use it from time to time. Accordingly, buying a professional stapler will only be an unjustified waste of money. There is nothing to say about stationery staplers - these are very simple devices, probably familiar to everyone.

At the same time, it should be emphasized that the principle of charging for all staplers is approximately the same. Of course, there are some differences here, of course, but by and large they are insignificant. Let's look at the simplest example of how to properly insert staples into a small stapler (also called a clerical stapler). Today, such a device is probably in every family, so many are fine
know how to prepare the tool for work.

The first step is to pull up the back or front of the top cover. A clip will open in front of you. Now it is necessary to push the spring back, until it stops, and then insert the plate with brackets. Then all that remains is to return the lid to its reverse position, making sure that there is a click. That's it - the stapler is ready to go. It remains only to check it on some unnecessary sheet of paper, shooting off one or two staples.

The furniture stapler is charged in approximately the same way. Only here, first of all, it is necessary to put the instrument on the safety catch. This precaution will be useful if you are loading the staples into a large stapler, regardless of its type. The fuse is a good protection against accidental shooting, and therefore we do not recommend neglecting basic safety rules. Do not forget that the professional tool is powerful enough, and the staple may well fit tightly into soft tissues.

However, let's get back to the main question. So, putting the tool on the fuse, we need to get access to the clip for the staples. There may be different options here. In some models, you just need to pull the box towards you, in others - press a special button or release the latch. The instruction manual supplied with the instrument will tell you how to do this. However, if there is none, that's okay. Even a person who has never held such a model in his hands can figure out what's what. Everything is really very simple here. Having gained access to the clip, we put a plate with brackets there and return the box to its original position. In many models, a characteristic click will indicate the correctness of the action.

When inserting staples into an electric or pneumatic stapler, it is recommended to disconnect the tool from the mains or the compressor. For a cordless tool, simply put the safety catch on. However, you can disconnect the battery for reliability. Well, the sequence of actions here will be the same. That is, we first gain access to the box, then fill it with consumables, and then return the clip to its place. Of course, there are minor differences depending on the model. However, they can hardly be called critical.

Separately, I would like to note the filling of the printer or copier with staples. Here it will already be necessary to act somewhat differently. The main difference is that in this office equipment the entire cartridge with consumables is changed at once. Accordingly, first of all, you will need to buy a new one. When buying, be sure to check if this type is suitable for your printer or copier. After all, there may be different options. Next, we find the finisher and remove the empty cartridge from it. Where exactly this compartment is located, you can find out from the operating instructions or ask the corresponding request in the Internet search engine. Typically, you press the release tabs to remove the cartridge from the finisher. Now all that remains is to install a new cartridge.

In conclusion, I would like to say a few words about staple staples. They are different - primarily in size. Staples are also distinguished by the material of manufacture. Therefore, before buying, it is better to consult with the seller about which consumables are suitable, for example, for furniture. After all, the wrong choice may well have a negative impact on the quality of work. In addition, many staplers do not work with small staples. Therefore, for each model, you need to select consumables taking into account the size of the latter.

The material from which the staples are made is also important. For example, aluminum are the cheapest, but they are not reliable. Therefore, such staples can be used only if no physical impact will then be exerted on the fixation site or for fastening thin materials. Copper brackets are quite expensive, as are stainless steel consumables. They are used only in a rather limited way - mass use is simply unprofitable. The most popular option is regular steel braces. This is probably the best ratio between price and quality. By the way, you can simply take one of the staples with you to the store, or the paper box itself - in this case, it will be simply impossible to make a mistake with the choice.

The first paper stapler was made in the 18th century for the French emperor Louis XV. Each brace was marked with a royal seal.

In 1867, D. McGill received a patent for a press, which made it possible to fasten sheets using brass fixtures.

His device became the basis for modern staplers. Modern devices are smaller and lighter. They are much more convenient to use.

Types of staplers

In 1997, the stapleless stapler was invented. This stapler holds sheets together in small strips cut from paper. Therefore, its owner does not have a question of how to charge the stapler. There are three types of staplers: standard, mini and construction.

They are equipped with a manual or electric drive. A stationery stapler is used to staple paper sheets with metal staples. With its help, brochures and notebooks are made. The conventional stapler staples up to 50 sheets. One pack contains 20 plates with 50 staples each. When you press the handle of the device, the spring, which is inside, stretches and unfolds, driving in the bracket. It passes through the paper and hits the deflection plate, which folds over its ends. Some stapler models fold the staples in two different ways: inward or outward. In the second case, the bracket can be easily pulled out. This stitching method is used to temporarily secure sheets. Some models have a staple removal tab at the back. They are also equipped with a mechanical amplifier. The best material for a stapler is plastic coated metal. To prevent the device from scratching the surface of the table, plastic or rubber pads are put on its bottom.

The construction stapler is used for upholstering furniture and walls. It has a high rate of fire and fires up to 60 blows per minute.

There are also stapler cartridges in some models of copiers and printers.

How do I load the stapler with staples?

Before filling the stapler, make sure that the staples you choose fit the stapler. Manufacturers indicate their size on the packaging of the device. For convenience, they are marked with numbers. How do I charge the stapler? Most models open from the top. In some cases, the side fasteners need to be pushed back before opening. Other staplers open at the push of a button. The opening method is indicated in the user manual.

How do I load the stapler with staples? They are placed in the compartment so that their ends fall into the slots. You can use tweezers to refill the mini stapler. Then the stapler is closed. In this case, a characteristic click should be heard. The stapler is checked by stapling a stack of sheets of paper together. If the staples bend and get stuck inside, you need to open the stapler and align the rows.

How do I charge the stapler? First you need to make sure the stapler is locked. Then you need to find the button that opens the tray. It is usually located on the back of the device. How do I charge the stapler? The staple holder is removed from the device. The remaining staples are discarded. The stapler is cleaned of dust and debris. Then it is turned over and the staples are inserted upside down.