Decorative panels. Brick-like decorative panels for walls Brick-like decorative panels

Homeowners often use bricks to decorate modern interiors. But natural material is expensive, in addition, it hides part of the space, which makes it impossible to use it in small rooms. Manufacturers offer several cheap alternatives with which to create a stylish interior. One of these options is brick wall panels.

Advantages and disadvantages of products

Brick walls are often found in styles such as loft and high-tech. Since these areas have gained great popularity in recent years, not only natural products, but also materials imitating brickwork have become in high demand in the construction market.

Wall panels deserve special attention, since they have a number of advantages not only over other types of brick imitation, but also over the brick cladding itself.

The main advantages of panels for interior decoration ste n:

With wall coverings, you can improve the sound and heat insulation of the room. If there are minor cracks and bumps on the wall surfaces, they will easily disappear under the panels.

Like all materials, brick imitation panels have certain disadvantages.... First, they are susceptible to mechanical damage. For this reason, they must not be installed in high traffic areas. Secondly, the coating is exposed to high temperatures. It must be ensured that there are no sources of open fire nearby. But these disadvantages do not prevent people from purchasing high-quality material, which, if properly used, will decorate the walls for a long time.

Types of finishing materials

Brick decorative panels can be classified according to several criteria. They are made from different materials in any color, they can have a different surface and additional coating, which makes them versatile in terms of finishing unique and individual interiors.

By the type of material "brick" panels are:

For the manufacture of panels with a brick pattern, chipboard, gypsum, plywood and hardboard are also used. With them, the finishing material is much cheaper, but in operation it is inferior to models made of plastic or MDF. For example, some panel variations poorly imitate brickwork, while others easily deteriorate under the influence of moisture or mechanical stress.

According to the specifics of installation, the products are divided into the following types:

Rack and pinion models. Such coatings are represented by elongated planks of different widths, with grooves on one side for inserting an adjacent slatted slab.
Plates. Products are produced in a set in the form of rectangular tiles. They are considered the best option for wall decoration, since it will be easier to select a pattern with them.
Sheets. Panels produced by sheets can speed up the installation process of the overall room.

Finishing materials can be made with a flat coating or embossed brick-like surface. The panels can be mounted in different ways. Usually, the manufacturer's recommendations are given in the instructions for the products, which must be studied so that there are no problems during the repair.

How to choose the right option

Panels imitating brick walls are available in a wide range. When choosing a coating, one should take into account the room in which they will be installed. For each type of room, finishing products must have certain properties.

With the right choice of decorative items, you can create a beautiful and spectacular room cladding. Before buying material, you should pay attention to the manufacturer. Experts advise purchasing certified products of well-known and proven brands in order to get a high-quality finishing result. You should also take the time to read the instructions, which provide recommendations for the installation and operation of the panels. Fixing elements are purchased in accordance with a specific type of product.

Main areas of application

Brick imitation decorative panels are used in the interior decoration of many buildings.... The material is used to decorate residential premises and corridors of private houses and apartments. A decorative product is often used for cladding kitchens and loggias. The waterproof material is an excellent solution for decorating bathrooms, showers and toilets.

The brick pattern coating is widely used in the design of shops, shopping malls, hotels, cafes, restaurants and other public places. In this case, "brick" panels are used to decorate bar counters, walls, columns and arched structures.

Light versions of products can be used to decorate all walls in the room. Bright and dark options should be used for one wall, and for the rest of the surfaces it is necessary to choose a light coating, which can be represented by other finishing materials: wallpaper, paint, plaster or tiles.

A large amount of brick pattern can visually overload the interior.... Designers recommend using panels that imitate brickwork as accents. In the kitchen, you can decorate an apron with a cover. In bedrooms, the original decoration is usually done above the head of the bed. In the living room, it is used to accentuate the central wall. Also, the material can be used for cladding a fireplace, plasma TV, large paintings or doorways.

Use in stylistic interiors

With the variety of brick panels, you can create an original and extravagant interior. Brick trim is welcome in many styles. If it is not possible to purchase real or decorative bricks, then panels with imitation bricks will be an ideal solution for interior decoration.

Most often, brickwork occurs in the following directions:

With panels reminiscent of brickwork, you can create an interesting and shocking design. A budget option for finishing materials with imitation bricks will be the best solution for those people who like to make repairs often. With such coatings, you can quickly change the style and concept of the interior.

Decorative panels that replace brick trim are easy to maintain b. Regular maintenance consists of cleaning the surfaces with a damp cloth and soapy water.

To clean the panels from dust and dirt, you can use commercial products that do not contain abrasive components and aggressive substances. It is better to care for the coating using liquid detergents with a gentle composition..

Powdered products quickly spoil the surface of the panels, which are scratched by abrasive particles. In order to avoid defects, the rules for cleaning decorative materials should be followed, then they can stay in their original appearance for a long time.

Brick decoration in the interior is an excellent design solution. Decorative panels with imitation of bricks allow you to execute the desired design with little material and time costs. Practical products that reproduce the structure of real material will easily transform any room, which will look stylish and impressive.

When decorating a building inside and outside, natural wood, stone or brick are often used. Previously, natural materials were considered indispensable due to environmental safety and original appearance. However, they require construction experience and are quite expensive. Such heavy structures are not always convenient in the design of modern interiors. With the help of modern technologies, they learned how to create decorative panels that imitate brickwork. Imitation is difficult to distinguish from ordinary bricks, but in practice, brick-like wall panels have proven to be a reliable facing material.

Profile building panels for rooms

For interior wall decoration

Wall panels are the leader among brick-imitating finishing materials. They are resistant to temperature changes and sunlight, are not afraid of moisture, do not burn or rust, while having elasticity and strength. Some people prefer to combine brick elements with.

How plastic wall panels look in Leroy Merlin can be seen in this article.

Panels stylized as brickwork are used in different buildings:

in bathrooms, loggias and corridors of private apartments and houses,
for decorating arches, columns, bar counters, theater decorations and halls in shops, hotels and conference rooms.

How to install moisture-resistant wall panels for the bathroom and how they look can be seen and read in the article.

MDF panels are made from pressed wood shavings. When exposed to high temperatures under pressure, ligin is released from the wood, which has binding properties and gives the material special strength. The front side of each panel is covered with acrylic paints. Such products, possessing the best qualities of the latest building materials, are difficult to distinguish from natural ones. with a print will not give such an effect.

Imitation of brick wall panels

Types of brick panels for facing external walls are:

sheets 120 - 240 cm long and 3 - 6 mm thick, which are mounted with a minimum number of joints, reliably protecting the outer frame of the house,
square type plates with a side of 0.98 m, with the help of which it is convenient to select a part of the wall or lay out a design drawing
slatted panels 12.5 - 30 cm wide, up to 400 cm long and 0.8 to 1.2 cm thick for convenient cladding of the basement of the building.

Facade panels imitated for brickwork have undeniable advantages:

low weight allows them to be used for finishing "light" foundations,
dry installation is possible even at sub-zero temperatures,
choice from a wide range of colors,
panels consisting of several layers do not require thermal insulation.

How to mount glass wall panels for the kitchen, as well as find out the cost of finishing material in this

Vinyl, cement and basement siding panels, imitating brickwork, will reliably protect the house from external influences. For the strength of the basement panels, a polymer fiber cement mixture is used.

High-strength clinker tiles from refractory slates are made by firing at about 1300 degrees for 36 hours. It has excellent technical performance:

high density - up to 2300 kg per cubic meter,
low thermal conductivity,
minimal water absorption due to the peculiarities of the structure of the crystal lattice,
low weight with minimum load on the foundation,
resistance to external influences is higher than that of bricks,
frost resistance (from 150 cycles),
over time, the unique material becomes even stronger,
the surface texture is embossed, smooth and rustic.

How sheet panels look like brick can be seen in this

Brick-like tiles reinforce walls like a monolith, enjoying the benefits of natural stone and ceramics. It is possible to quickly and easily restore the facade with tiles, replacing damaged elements, since high-quality clinker does not change color for a long time under the sun's rays.

Manufacturers and cost

On the market, you can choose wall cladding products of various sizes and colors to suit every taste and imagination. The choice of the manufacturer does not really matter, since identical technologies are used in the production of wall panels. The difference in prices for samples of the same type depends only on the thickness and design of the front surface.

Russian manufacturers produce brick panels with an area of about 3 square meters and a thickness of 4 mm. The unit cost is approximately 800 rubles, depending on the region of sale.

In the USA, panels are made of the same area, but 2 mm thicker. One American-made panel can cost more than 2 thousand rubles. Square cladding panels made in Malaysia can often be seen in the construction market. The cost per square meter is approximately 400 rubles.

So, each of the brick wall panels has its own advantages and disadvantages. When choosing a finish, evaluate the operating conditions and choose the right texture and color of the panels. Then the design you have created will differ not only in originality, but also in reliability, meeting all technical and aesthetic requirements.

The modern market is filled with a lot of decorative interior decoration. Cladding panels made of different materials and imitating brickwork are especially popular.

All panels differ in material of manufacture and method of operation. There are differences in the installation method. The most popular boards are made of MDF and PVC, interior decoration is carried out only with the use of wooden types. The PVC options are versatile and suitable for exterior walls. For cladding inside, MDF with an environmentally friendly base is most often preferred. It has a high density, the price is lower compared to PVC. Decorative planks made of PVC are more difficult to manufacture, but they perfectly mimic brickwork. There are also options with mosaic and natural stone surfaces.

Cladding panels are also made of other materials:

Their scope of use is limited, since air humidity and other features of the room are necessarily taken into account.

PVC panels for brick are less durable than MDF, but they are easier to install. This material is relatively fragile, therefore it is easily damaged during careless use. The cladding copes well with temperature changes, it is recommended for installation on the walls in the bathroom and on the facade of the house. Decorative products made of MDF are capricious and sensitive to minor changes.

There are differences in the specifics of the installation:

Rack and pinion. These are oblong-shaped planks with different widths. There is a groove on both sides for joining the next plate.
Type-setting wall. They have a rectangular shape. If there is a drawing, it is much easier to select it.
Leafy decorative. From a technological point of view, they are the best.

The strips also differ in terms of the specifics of their surface. There are options with imitation of modern brick, but flat. You can also buy relief types that perfectly replicate the old masonry.

Before buying, be sure to read the manufacturer's recommendations. Some varieties imply only glue mounting or rack and pinion.

At temperatures from -50 to + 50 ° C, they retain their operational external indicators. Some panels are allowed for use in conditions up to + 115 ° С.
The upper part has a decorative pattern. It is applied by means of printing: offset, thermal printing, lamination.
The drawing is protected with a protective varnish, the coating is matte or glossy.
The top layer is resistant to the negative effects of ultraviolet rays, ash, scratches, chemicals and other aggressive substances.
According to the standard, the length is 3000 mm, they are found with large dimensions.
Width - from 250 to 500 mm.
Thickness - up to 12 mm.

Pros and cons of such panels

Interior decoration made of MDF, PVC and other materials panels has a number of positive and negative sides.

1. Long service life. If the technology is followed, then the decorative wall panel will last up to 15 years. Throughout this period, it retains its original appearance.

2. Ideal for processing fireplaces, walls, columns, walls, podiums and other elements of the room.

3. An excellent opportunity to hide irregularities and other defects in the plane. When mounted on a frame, all errors are hidden. This technology eliminates the need to apply a leveling plaster layer vertically.

4. The minimum weight of the cladding eliminates the load on the supporting structures. Due to this, installation on plasterboard partitions is allowed. Plastic panels are relatively thin, so they can be cut with a sharp clerical knife.

5. Relatively simple installation that does not require significant knowledge and special equipment. They can be disassembled if necessary.

6. Easy to maintain. The interior is easy to keep clean. Decorative panels for plastic bricks cope with negative external influences: fungus, mold, high humidity. Any dirt and dust is simply removed from the wall by wet cleaning.

7. A wide selection of textures, colors and designs.

8. Can be ideally combined with other materials and technologies. Due to this, a certain zest can be brought to the room.

9. High practicality allows the use of panels from the inside of bars, cafes, restaurants, shops, offices, hotels.

10. No need to paint.

11. After a while, it does not turn yellow and does not change its technical characteristics.

12. Does not emit toxic substances when exposed to ultraviolet radiation. Belongs to the category of environmentally friendly materials.

13. High resistance to moisture. Ideal for rooms with high humidity levels.

14. Does not burn in direct contact with fire. Due to its high density, the plastic melts.

Cons of wall panels that imitate brickwork:

With careless use, it is easy to deform under the influence of mechanical stress or unevenness of the base base.
The likelihood of scratches.
In the void between the wall and the cladding, rodents can start, dust accumulate, and so on.

There are two ways to attach the cladding:

The first is only correct when using a plastic trim. The whole process consists of several successive stages. First of all, the surface is prepared and cleaned with high quality, it should be carefully leveled. After that, the wall is primed to remove dust from it and increase the quality of adhesion.

The bonding process can be started after the leveling and primer layers have dried. For work you will need to prepare:

Sharp clerical knife.
Jigsaw.
Adhesive mixture or liquid nails.
Level.

Installation starts from the corner. Each panel must match the next one in the figure. If liquid nails are used, then the glue is applied to the finish in dots or in lines (zigzag). After that, the cladding is gently pressed against the wall.

Another method simplifies the preparatory work; for this, a crate is installed. Engineering communications can pass under it. If electrical wires are laid, then they must be in a protective sleeve. The void between the frame posts is filled with heat-insulating or sound-insulating material, mineral wool is suitable. After that, the panels are fastened. It is important to follow the pattern to form a beautiful brickwork.

This technology has its advantages over glue:

There is no need to prepare the surface, the frame will hide all the irregularities.
It is easy to achieve perfectly flat walls.
Simple and quick installation.

If you hurry, the lathing will turn out to be crooked, and after installing the panels, these irregularities will be emphasized. The useful area of the room is reduced by the width of the frame. In some cases, it is incorrect to carry out such internal work due to the lack of square centimeters. You can use special clamps or other fixation.

The table shows approximate prices in the territory of the Russian Federation:

Options for interior wall decoration with decorative brick panels

One of the varieties of current interior decoration is wall slabs that imitate brickwork. Most decorative brickwork panels have a two-layer structure. There are many options for such products, the inner side of which works simultaneously as a sound insulator and insulation. The boards not only look decorative, but are also practical and easy to clean.

Brick finish options

Brickwork is typical of the English classical and rural style. Also used in country, gothic, romanesque, loft and some others. Imitation brickwork can be combined with many interior materials such as metal, wood, wallpaper, various paints and plasters.

When decorating all walls of a room with pseudo-brick panels, the interior will create the atmosphere of an ancient castle, but such an environment will emotionally put pressure on the people in the room. It is better to cover one wall with slabs. This will not overload the interior of a small room, provided that the tones are non-aggressive and the colors are soft.

It is important to organically fit the brickwork into the interior.

Bright brick can be used only for a small fragment of the walls in order to focus on a specific area. Light, gray-white shades of brick slabs will organically fit into the interior, made in pastel colors, create a feeling of coolness and free space.

Panel types

All brick panels differ in the type of material and method of application. The most relevant options are MDF and PVC boards. MDF panels are used only for interior work, while the latter are used for all types of finishes.

Wood-based wall panels are more commonly used for interior decoration, as they are more environmentally friendly. MDF panel has sufficient density and can be used in the form of hinged elements of cabinets, shelves, ceiling tiles.

MDF and PVC panels are installed most often

PVC slabs are more difficult to manufacture than MDF and can have a surface inlaid with samples of artificial stone in a mosaic design. They are more expensive than conventional MDF panels made using a fairly simple technology.

Brick wall panels for interior decoration are also made of other materials:

They are used to a limited extent, depending on the humidity and temperature of the room.

Pros and cons of plastic slabs

Benefits of using plastic panels:

Decorative plastic plates are very easy to attach, so their installation and repair can be done by hand. Thanks to the large area of slabs (from 3 to 8 square meters), the work will be completed promptly. Cutting can be done with a hacksaw for metal.
The panels have a long service life that exceeds 10 years. They fit well on any base, without requiring the cost of preparing it. They are lightweight, which makes them easier to work with.
The cladding panels are easy to clean. Does not require any restoration measures (eg painting or plastering). They just need to be periodically cleaned of dirt with a soapy sponge.
PVC wall panels are versatile, suitable for exterior and interior wall decoration, even used for the ceiling.
With the correct installation of the slabs, you can improve the thermal insulation and sound insulation of the walls of the house, as well as protect it from moisture penetration.

Decorative plastic slabs will last more than 10 years

Disadvantages of using panels:

The material from which the decorative wall panels are made is non-flammable, but easily deformed from exposure to high temperatures. Therefore, products should be protected from fire and mounted away from stoves and fireplaces.
Imitation brickwork made of PVC has a low mechanical strength, making dents and scratches inevitable.

Installation of plastic panels for brick

Plastic boards are generally glued directly to the surface of the walls. At the same time, minor irregularities do not affect the result of the work. The material has sufficient elasticity, which allows deviations when pasting the surface.

The significant curvature of the walls allows the panels to be installed using a frame.

Installation is carried out either with the original sheathing of the frame with plywood, or by reducing the pitch of the sheathing.

Decorative wall slabs are not strong enough to withstand the effects of mechanical stress, and the plywood sheet provides them with some protection.

Preparation for the installation of PVC boards begins with the installation of the frame.

Plates are attached to the frame

Required materials and tools:

plumb line or thread;
slats for a frame made of metal or wood;
puncher;
start and finish profiles;
metal staples;
special stapler;
screws, dowels.

After preparing everything necessary, proceed to the horizontal installation of the rails.

The installation process begins with the top rail. After its installation, using a plumb line, the place of attachment of the lower rail is determined. At the end, the middle slats are mounted. The frame is ready.

With the help of a stapler, a starting profile is attached to the rails. PVC boards are sequentially installed on the wall.

When the penultimate plate remains, attach the finishing profile.

The last plate, after adjustment, is inserted into place without fastening.

MDF panels

Decorative MDF boards are produced by pressing shavings. Synthetic resins and a small amount of formaldehyde are used as a binder.

Wall panels made of MDF are moisture resistant and can be used in rooms exposed to constant moisture (kitchen and bathroom). Installation of slabs is done in a frame way, it is uncomplicated and takes a minimum of time.

The panels have a number of advantages:

strength;
hygiene;
ease of care;
environmental friendliness;
practicality;
the ability to hang cabinets and shelves;
low price.

Imitation brick allows you to significantly save on repairs

The building materials market is flooded with products of different quality and price categories. The imitation is often so well done that it is difficult to immediately distinguish it from the original. If natural materials go beyond income, you can safely pick up an affordable substitute of excellent quality and decorative properties.

Brick MDF panels: pros and cons

Decorating a room with natural materials has always been popular, but its price is not affordable for everyone. Based on this, most manufacturers began to produce artificial versions that outwardly practically do not differ from the original samples. An example in this matter was the decoration of a room under a brick.

Today it is not difficult to purchase MDF panels, and a believable imitation of classic masonry will become a highlight in the interior.

MDF panels can boast of their main advantage - a pleasant cost, but that's not all. The positive qualities include a large selection of shades, relief structures, various forms. This is what makes this material so popular. As for such brick-like panels, it should be noted right away that their installation is very simple. In addition, this material can be used for decoration almost everywhere, since it weighs a little. All these qualities make it possible to expand the area of use.

The product itself can be made of various materials, therefore they are divided into two types.

PVC. They include polyvinyl chloride, which is referred to as artificial materials. Initially, the material gets only white and only then it is painted.
Panels made for brick. Such material immediately differs in its appearance, in addition, it has increased reliability and durability. Panels of this type are made using wood chips and high pressure. It is due to the fact that the material is influenced by pressure and temperature, it acquires excellent technical qualities.

As a result, in the production process, panels with a rectangular shape and an area of 3-8 m2 are obtained. At the end, the resulting plates are cut with a jigsaw or a hacksaw and in this form are delivered to stores.

The panel is a good solution, since as a decoration it can hide uneven walls, and, if necessary, hide prominent communications and decorate niches.

Modern designers, using such a covering, began to create various decorative elements. Thus, today two-level floors are made out with MDF-panels for brick, columns are visualized or "torn" surfaces are made.

That is, there are a lot of options in which a brick panel can be used. Therefore, it will not be difficult to make a beautiful and exclusive interior, and the work can become very interesting.

Peculiarities

If we take for comparison all kinds of artificial finishing materials, then MDF among them will be of the highest quality. The manufactured external walls for brick will be more resistant to various external factors and influences.

It is for this reason that MDF is used for decoration:

But this does not mean that MDF cannot be used indoors. This material is ideal for decorating kitchens, hallways and even bathrooms. In the kitchen and in the hallway, it is easy to remove grease and dirt from it, and in the bathroom it will not deteriorate from constant humidity.

Advantages and disadvantages

If you read this material in more detail, you cannot fail to notice its advantages.

These include many qualities.

Simple installation. The work of installing the material can be done by yourself, even if you do not have the skills or knowledge. You just need to familiarize yourself with the technology, and you can safely do the work.
Brick-like wall panels weigh a little. For this reason, any surface can be coated with them.
Fastening does not need preparatory work to level the base. Therefore, there is also savings in money and time.
The panels have a long service life. With proper care, they will serve the user for more than 10 years. During the period of operation, cracks or chips will not appear on them. In addition, their appearance does not need to be updated.
They are versatile. For this reason, they can be used on any surface, even for outdoor cladding.
Since the panels can be partially reconstructed, it becomes possible to replace a single sheet without removing others.

That is, there are many positive qualities of MDF panels, as for the negative sides, it should be said right away that there are not many of them.

However, it is important to know these disadvantages as well.

The panels have a low level of fire resistance. In no case should this material be near an open fire, and it should also not be heat treated.
During operation, damage must be avoided. A strong impact can dent the material.

Otherwise, there is no reason to deny yourself the pleasure of making the design original with the help of brick-like panels.

MDF in the interior

The brick will look appropriate in a variety of interiors. The decoration is typical for rural areas and for some classic ones.

For example, these can be styles:

The wall cannot be left without decoration, because it plays not only the role of decoration, but also heat and sound insulation.

Not so long ago, the building materials market could only offer wallpaper with a brick pattern, but they did not bring the necessary realism into the interior. Today the assortment has been expanded, materials are able to imitate texture and texture.

As for the designers, they thought through the possibilities of decorating with such brickwork to the smallest detail.

Brickwork will be appropriate if there are more than two rooms in the living area. This is due to the fact that, despite the fact that the interior will be cozy and resemble an old castle, it will be inconvenient to be in such a space all the time. A modern resident is not used to such decorations, so pressure will be exerted on him and the impression of a lack of comfort is created.
In order not to overload the interior, it is better to cover with panels on one specific wall. This solution is also suitable for one-room apartments, but it is advisable to choose a softer shade. Avoid aggressive design.

If you need to decorate only a specific part of the wall, you can use bricks with bright colors. This will highlight a specific area. But you should not decorate the fireplace with this material, since the presence of an open fire can lead to a fire.
It is not recommended to use red brick in living space, it is better to use it in restaurants or clubs. At home, this color will eliminate the calm and emotional atmosphere.
If you want a calm, unrestrained atmosphere, white or light gray brick is the best choice. This design can fit into a pastel interior. However, you should take into account the possible "chill", so it is advisable to dilute such an environment with something.

There are enough finishing options. They only depend on the size of the room, what kind of lighting it has and, of course, on the wishes of the owner. But with all the positive qualities, one should not forget that in some cases this design will be inappropriate.

Application

So, panels can be used not only for interior, but also for exterior decoration. This material has successfully proven itself in the design of non-glazed balconies and loggias. And also it can be used for facing terraces and gazebos. Such material will organically look on the facade of the building, while it does not have to be residential.

Of course, there is no doubt that this product will look perfect on the wall in an original home interior, which is decorated in a certain stylistic direction. But the area of their use does not end there either. Due to their light weight, the panels can even be installed on the ceiling, resulting in an interesting and unusual composition.

How to glue MDF panels, see the next video.

Brick panel for interior wall decoration, their types and features

Slabs with imitation of brick aesthetics are an innovative finishing material for residential private houses and city apartments, as well as for entertainment premises from the inside. This design is relevant in loft style interiors, high-tech, pop art, fusion of others. Let's talk further about the performance parameters of brick-like panels for interior wall decoration, which have been so popular in recent years.

Advantages and disadvantages

Decorative brick wall panels are a versatile finishing material for interior decoration of walls, walls, podiums, fireplaces, columns, and so on. Such boards (PVC, MDF and others) have a large number of advantages, which are appreciated by a large number of buyers. Let's talk about them in more detail:

long service life - a design of this kind, subject to correct installation, can last up to 15 years without losing its beauty and basic properties;
the ability to hide surface irregularities, communication systems, which is very valuable when decorating old buildings, as well as walls with significant level differences from the vertical;
light weight, small thickness, the property is easy to cut with a clerical knife, which makes it possible to use this material for finishing not only concrete walls, but also plasterboard partitions. Such slabs are characterized by a rather easy installation and dismantling procedure, if necessary;
high practicality, undemanding care. Plates have an increased level of resistance to negative factors: high levels of humidity, scratches, mildew, mold, dirt, dust;
varied design, many color shades, interesting texture, do not require finishing painting. All this allows the panels to be used in residential areas, living rooms, offices, cafes, bars and restaurants. They are wonderfully combined with other finishing materials, allowing you to bring notes of solemnity and respectability to the room.

The disadvantage of PVC brick panels for walls inside a dwelling is the risk of their deformation after installation. Similar situations can occur if the wall had very impressive irregularities or defects (cracks, large dents), which could not be eliminated before finishing. Also, damage to the coating is possible if a significant mechanical effect has been exerted on the finish (strong impact, scratch, and so on).

Types of brick panels for interior wall decoration

Today, manufacturers have significantly expanded the selection of brick-like panels, which are used for interior decoration of the wall surface of residential premises. Slabs of different textures, colors, sizes appeared. This allows interior designers to bring to life the most original ideas, to show imagination, and also to apply non-standard solutions and techniques for wall decoration.

Let's describe the most popular types of PVC panels with imitation of the external aesthetics of bricks. According to the basic material in the manufacturing process, there are:

PVC - for their manufacture, polyvinyl chloride is used in combination with special softeners. It is a safe, lightweight material, the installation of which is very simple to implement and is carried out on a special adhesive composition. Wall slabs of this type are important to use for wall and ceiling decoration;
Brick-like MDF is created on the basis of environmentally friendly and safe for human health wood chips, which provides the material with high operational parameters: sound and thermal insulation properties, wear resistance, durability. Decorative MDF products are most relevant for use in residential premises.

MDF
Pvc

You can also find panels made of chipboard, hardboard, gypsum, plywood. These are cheaper options, but the operational parameters of such products are somewhat inferior to PVC and MDF. For example, the aesthetics of some do not imitate the brick surface vividly enough, while others are not resistant to moisture or mechanical stress.

According to the specifics of the installation, they are distinguished:

lath products are oblong planks of different widths, which have a groove on one side for inserting a subsequent slab;
typesetting wall plates for interior wall decoration of rectangular shape, which simplifies the process of selecting a pattern;
decorative sheet panels for brick are distinguished by the highest level of manufacturability.

By the specifics of the surface, you can find:

flat facing material with imitation of modern bricks;
embossed wall panels imitating old brick.

Before acquiring a specific look, carefully study the manufacturer's recommendations for its installation, the clamps used for this purpose (adhesive composition, hardware, staples, and so on), as well as the current operating conditions of the coating. Then the finish will last much longer.

Which is better to choose

The choice of slabs for interior decoration of the wall surface is quite wide today, so it is quite difficult to navigate instantly in the relevance of using this or that type. Many interior slabs have specific properties that limit the scope of application of a particular type.

Let us take an interest in the opinion of experienced specialists on this matter, and they assert the following:

slabs are relevant in small rooms, since their installation is carried out horizontally. Such an arrangement of plates visually allows you to achieve the effect of expanding a narrow space. At the same time, typesetting wall plates have a square shape, so they are relevant if you want to reproduce the original geometric pattern on the basis. The sheet type of such material is rather large in scale, therefore, it is used in the case of a spacious room and a base without protrusions and niches;
MDF products for decorating bathrooms, saunas or terraces with a pool are not suitable, as the basis for the manufacture of such material is wood. The stove will simply dry out under the influence of an increased level of moisture. It does not tolerate MDF and prolonged exposure to sunlight, as a result of which a surface with a similar finish can lighten over time. Plastic plates for decorating the wall surface of a dwelling from the inside are more practical and resistant to moisture, therefore they can be used in kitchens and bathrooms;
Speaking about a specific manufacturer, we note the following: it is worth giving preference to proven brands that accompany their products with quality certificates. This is an additional guarantee of high performance finishing parameters.

Dimensions (edit)

For the design of residential interiors today, you can pick up panels of different sizes with imitation of brick aesthetics. The larger options work faster. In addition, fewer joints can be obtained when using such products, because they allow you to cover in one large area of the base. As a result, the interior design comes out more laconic and attractive.

Brick MDF panels: examples of interior design

Brickwork became fashionable in interior design a few years ago. Loft, high-tech, minimalism styles introduced raw structural elements into the interior decoration: concrete, metal and brick. The use of natural brickwork in apartments is not always appropriate due to the large weight of the material and the high cost of such work. A more affordable alternative to creating a stylish interior is MDF wall panels. This article will tell you about the advantages of this convenient decor and how to use it.

Peculiarities

MDF panels occupy a leading position in the building materials market due to their valuable qualities:

The material is environmentally friendly. The composition of MDF contains natural and safe for human health fine-dispersion shavings and carbide resins.
The laminating film protects the surface from mechanical stress and has a rich palette of colors.
It is easy to care for the panels, it is enough to wipe them with a damp cloth, and if necessary, you can wash them with any detergent.

The panels are easy to install, a small amount of construction waste is generated during installation, and the process itself takes a little time and does not require special construction skills.
MDF boards can be fixed with glue and lathing from beams. Fastening the panels to the frame allows you to hide the unevenness of the walls and hide the electrical wiring behind the sheathing.
Moisture-resistant MDF panels can be used for interior decoration of bathrooms, loggias, country houses and kitchens.

The disadvantage is the high flammability of the material, so its close "proximity" to a fireplace, stove, gas stove or electric heater is undesirable.

Brick-like wall panels are represented by a wide variety of textures and colors. You can easily choose a brick layout scheme that suits you. The pattern of the laminated flooring can imitate single-row, multi-row, radius masonry, as well as wicker, herringbone or staggered bricks.

The jointing gives the masonry an additional decorative effect due to a contrasting or nuanced color, smoothness or deliberate unevenness of the seam. The body of the brick either protrudes in relief above the level of the slab or has a planar image. The surface can be smooth or rough (chipped brick). The hue can be reddish, yellow, gray, or any other.

Brickwork in different styles

Brickwork can be present in the interior in various ways. A common technique is when the whole house or apartment is finished with MDF panels "brick-like" in natural colors. This finishing option requires large spaces and high ceilings. The color of natural bricks can range from red to gray and almost black. The richness of color transitions gives volume to the walls, which, with a bright finish, become an even more significant element of the room.

This type of finish will be the best choice for interior decoration in style loft. The beauty of natural stone, changed from time to time, becomes the main decoration of the home. Furniture is usually selected in one color (white, black, gray, blue, green). The variegation of the walls should be compensated for by the calm environment. The white ceiling brings orderliness to the decor and visually increases the height of the room.

In Scandinavian interiors the walls are painted white. The nearly black ceiling beams, doorways and skirting boards give the space a clear geometry. The monotony of a brick wall is effectively broken by a special spotlight. Both for loft-style interiors and for Scandinavian style MDF panels with embossed brickwork are better suited.

Old table from the USSR - we restore with our own hands and save money

Decorating the walls inside the apartment, as well as the facade of the house, with decorative bricks or material imitating brickwork has never gone out of fashion. However, unfortunately, it is not always possible to use real brick for interior decoration of housing, since it will make the floor slabs of multi-storey buildings heavier. In addition, it is not so easy to make an ideal masonry "for joining", because this requires at least a minimal experience of a bricklayer.

It is much easier to use other interesting ways to achieve the desired result. Imitation of bricks for can be made in different ways and, which is typical, is available for installation by anyone, even a novice finisher.

The main types of brick imitation and technology for working with them

Considering the fact that brickwork has remained popular for decades and is used in the reproduction of various interior styles, manufacturers did not miss this moment and developed several types of material that can replace natural brick.

Such finishes are made in different forms - it can be flexible or rigid tiles, having the size of the end side of a brick, or large wall panels that cover an entire section of the wall at once, made of polyvinyl chloride (PVC), MDF or glass fiber cement.

Flexible brick-like tiles

Flexible tiles imitating brickwork are great for interior and exterior wall decoration. This modern material is not only decorative, but also a protective coating for surfaces and has a number of positive qualities - this includes resistance to external weathering, impact resistance, vapor permeability, inertness to microorganisms, as well as to ultraviolet radiation, and, of course, aesthetic appearance and a fairly simple process of processing and installation.

"Flexible brick" is easily mounted not only on straight, flat surfaces, but also perfectly bends around the outer and inner corners of the premises.

A similar material is used for wall decoration inside apartments and houses, in particular, premises such as hallways, corridors, kitchens, living rooms, loggias. It is also suitable for external, facade walls. It is very convenient to use such tiles for facing columns, fireplaces, small architectural forms, as well as in any areas where such a design is intended. Regardless of the complexity of the surface configuration.

The tile can be used to finish the entire wall completely or be fixed to its individual sections. Since the material has many colors, it is possible to make the finish in a single color or use tiles of different shades, harmoniously combining them with each other.

Installation of "flexible brick"

Installation of flexible tiles does not require complex electrical tools. It will only be necessary to prepare:

- even spatula 120 ÷ 150 mm wide - for mixing and applying glue;

- notched trowel with a comb 4 mm high and 150 ÷ 200 mm wide;

- building level 1000 ÷ 1500 mm long;

- a ruler with a length of 1000 ÷ 1500 mm;

- marking colored cord for striking lines;

- a simple pencil;

- powerful scissors;

- a brush 12 mm wide for leveling the mortar in the tile joints.

Materials other than tiles will require a wall primer and a special

For installation, a dry building mixture can be used - ordinary tile adhesive, but it is more convenient to use a ready-to-use composition packaged in plastic buckets. In any case, when purchasing a tile, you should immediately consult with the seller about the glue suitable for a particular material.

In order for the masonry to be even and neat, the wall must be tidied up before starting installation by cleaning and leveling its surface. After the leveling solution has dried, the wall must be primed with an antiseptic compound, which will give the materials higher adhesion and prevent mold from appearing under the cladding in the future. When the primer is dry, you can proceed to the installation of the tiles.

In addition, it is necessary to take into account the fact that the installation work must be carried out at a temperature of at least +5 degrees, otherwise the adhesion between the materials will be insufficient, and the tile may subsequently begin to peel off the wall surface.

Imitation brick prices

imitation brick

The first step is to draw the wall surface into flat areas, along which glue will be applied and the tiles will be fixed. If the entire wall is completely revetted, then it is imperative to beat off the upper and lower bounding lines.
The glue is not applied to the entire surface, but to separate lined areas of about 1000 × 500 mm. The layer of glue should be about 2 ÷ 3 mm - it is applied with an even trowel, and then spread over the entire area to be veneered with a notched trowel so that the grooves of the same height are obtained.

The tile is glued in order, and if the first of the rows starts with a whole tile, then the second - from half or one third of the "brick", depending on the desired location of the masonry seams.

It is quite simple to divide the "flexible brick" into parts at any angle, without using any power tools: it is marked and cut along the line with ordinary scissors.

The seams between the rows can have different thicknesses - this parameter will depend on the preference of the master, but usually the gap is left at 10 ÷ 12 mm. The selected size of the joints is taken into account immediately when marking the wall into zones for installation.

"Flexible brick" easily bends around ledges formed at any angle, as well as interior corners or rounded walls, if any on the surface to be finished.

When the intended surface area is decorated with tiles, you need to immediately level the solution in the horizontal and vertical joints, otherwise the glue will set, and it will not work out neatly. Smoothing the mortar is carried out using a relatively thin brush of medium hardness, slightly moistened with water.

The fact that flexible tiles do not need to additionally purchase grout for joints can also be safely called an advantage of the material, since you do not have to make extra costs.

Video: flexible cladding tiles with excellent clinker imitation

Rigid brick-like facing tiles

Clinker tiles

Clinker tiles are not used for interior wall cladding as often as other types of material that imitate brick, since they have a fairly high price. It is more often purchased for facades, given its highest performance characteristics. Nevertheless, it can be used for interior decoration and it, especially if a stove or fireplace is to be faced.

It is made from natural highly plastic clays, without the use of artificial colors and plasticizers. Raw materials are pressed and fired at high temperatures, reaching + 1150 ÷ 1200 degrees. Thanks to this, clinker tiles are an environmentally friendly material with unsurpassed natural qualities of durability and reliability, which are multiplied during the production process.

Such a finishing material is excellent for both interior and facade claddings. It has a very low moisture absorption coefficient, high frost resistance and wear resistance, inertness to temperature extremes and to almost any chemical attack.

The decorativeness of clinker tiles is not inferior to its physical and technical characteristics, since the variety of design options allows you to choose a material for every taste and style of the interior of the premises or the facade of the building. The finish can have a rough, glazed or natural, untreated surface. Tiles of different sizes and shapes are on sale, and this factor also allows you to bring to life the most daring design ideas.

Installation of brick-like facing tiles

As mentioned above, all tiles with a certain stiffness are mounted on the wall in about the same way. For work, you will need the same tools as for "flexible brick", and besides, for cutting this material, you will need to prepare a hand-held circular saw or a grinding machine with a disc for a stone.

The work on laying cladding from this type of material is more complicated, since the finish already has a significant weight, and after installation it requires careful sealing of the joints between the tiles.

The cladding process is carried out in the following order:

Laying should be done on a prepared, primed and relatively flat wall.
The marking of the wall surface is carried out in the same way as for the installation of any piece facing material: straight lines are beaten off along the upper and lower levels of the masonry, then, it is recommended that the entire distance between them is calculated and divided horizontally so that the intended number of rows can be accommodated in this area masonry, with the obligatory consideration of the thickness of the seams between them. It is especially important to carry out this process if there is not enough experience in wall cladding - the markings will help to make the masonry perfectly even.

When marking, for each of the seams between the rows, 10 ÷ 12 mm must be taken away.

Next, a glue mass is prepared, which is selected in accordance with the type of material on the basis of which the finishing tiles are made.

The laying begins from the bottom row, which is carefully verified by the building level, since the accuracy of the entire wall cladding will depend on its horizontalness. If the first row starts with an integer, then the second and all subsequent even rows with ½ or ⅓ tiles.
Further, glue is applied to the wall with a spatula in a layer of 3 ÷ 4 mm. After that, the mass is distributed with a notched trowel, which leaves grooves of equal height, ensuring the most uniform distribution of the adhesive when pressing the tile. When laying some heavy types of tiles (the same clinker), it is additionally recommended to apply the glue to the back side of the facing material. Therefore, before starting work, you should definitely study the instructions attached to the package, in which the nuances of installing a particular material are clarified.

During the installation process, it is necessary to control the evenness of each of the rows to be laid.

To ensure that the width of the joints between the tiles on the entire surface to be faced is the same, some craftsmen use special calibrating tabs of the same size. They are temporarily installed between the rows, and after the glue mass has set, they are removed and installed again, but already on the upper rows. As such calibrators, you can use a wooden glazing bead or silicone posts.

For facing the outer corners, special curly elements are used that are able to mask existing chips and make the corners neat and protected.

At the end of the masonry and after the glue has completely dried, the joints between the tiles must be securely and accurately repaired using grouts specially designed for this purpose. You can fill the seams in different ways:

- Use ready-made formulations in tubes, using a special pistol.

- Place the mixed grout in a plastic bag, and then cut one of its corners obliquely to the width of the seam and gently squeeze the grout into the gaps between the rows.

Unlike PVC panels, MDF trim is not recommended for use in rooms with high humidity, but it is perfect for leveling the walls of hallways, corridors, insulated balconies, and living rooms.

Manufacturers also thought over the design of the corners, making special curly elements for this.

Fiberglass panels

Special mention should be made of glass fiber reinforced concrete panels. This facing material is made on the basis of ordinary cement with the addition of glass fiber fibers, which increases the strength of the slabs tenfold. For external finishing, the panels can be additionally reinforced with metal elements, which increase the weight of the structure, but make it resistant to mechanical stress.

Reinforced only with fiberglass, the panels are not particularly intimidating in weight, the dimensions are still compact in thickness. The solution for their manufacture is colored in bulk, so the slabs are not afraid of small chips and abrasion. Some manufacturers in the production of molding sand add colored fiberglass to it, which is slightly darker or lighter than the main tone, but perfectly harmonizes with it - this gives a very interesting effect. In addition, additional paint application to the surface of finished and assembled products is allowed.

Well suited for interior decoration, but still more often it is used to transform the facade of the walls of a building.

Environmentally friendly slabs do not weigh down the walls, as they are lightweight. They perfectly protect surfaces from moisture and mechanical stress, as well as from the penetration of radio emissions into the house, and have a number of other attractive advantages. However, the cost of such facing materials is quite high, so not every owner can afford such a finish.

Installation of brick-like panels on the wall

If the surface of the wall is sufficiently flat, then the panels can be fixed to it without installing the frame structure. Lightweight PVC boards are glued to the cleaned and primed surface using one of the polymer adhesives. For example, liquid nails are good for this.

Finishing panels based on MDF have a significantly higher weight, therefore, in addition to glue, they are fixed on the wall with dowels in four to five places.

GRC panels can be fixed to a flat wall using cement-based tile adhesive.

In the event that the wall surfaces have significant distortions, they are corrected by fixing the frame structure, consisting of metal guides or a wooden beam, set exactly in the desired plane at the building level. Some manufacturers make special subsystems for their products, fixed on the wall or on an installed frame. In this case, the panels are hung on special elements of the subsystems.

Subsystems can have different designs, therefore, when purchasing cladding plates and attachment systems to them, it is necessary to check the compatibility and the presence of the attached installation instructions.

It is clear that if it is planned to install panels on a subsystem, the frame elements must be located in accordance with the peculiarity of this model.

The simplest type of fastening is possessed by plastic panels made on the principle of siding construction. They have a special perforated mounting plate in the upper part, through the holes of which the plate is fixed on the wall or frame. In this case, horizontal lathing elements are fixed to the wall surface, at a distance of the visible part of the slab.

Facing brick prices

facing brick

The installation of any cladding panels begins from the bottom of the wall, usually from the corner elements.

Homemade options for decorating walls for brickwork

If you want to save money by making an imitation of brickwork on one of the walls of an apartment or house with your own hands, you can use the original techniques developed by folk craftsmen.

Several options are widespread that do not require special costs for the purchase of cladding plates or panels, and also do not create any particular difficulties in installation:

Independent production of tiles from expanded polystyrene with a thickness of 10 ÷ 12 mm. For this purpose, it is recommended to use an extruded material with a higher performance than regular white foam.
Creation of a relief of brickwork using a stencil.
Reproduction of the desired pattern on the wall using masking tape.

Brick-like tiles made of expanded polystyrene

If it is planned to use the process of melting the edges of the foam plastic in the manufacture of tiles, then the work should be carried out in the open air, protecting the respiratory tract with a respirator, since this material is flammable, and releases toxic substances during combustion and melting.

The first step on the prepared, leveled and primed wall surface, using a ruler, a plumb line, a building level and a simple pencil, marks the "brickwork". The wall is drawn into horizontal stripes and vertical partitions, which determine the size of the brick and the joints between them and the masonry rows.
The second step is to mark the expanded polystyrene sheet into tiles of the selected size.

Then the material is cut into individual elements with a clerical knife. The number of such blocks should correspond to the number of bricks required to decorate a specific section of the wall on which the markings were made.

Further, in order to achieve the most reliable effect of imitation of a brick, you need to work on the resulting tile - this can be done in different ways. Its surface is treated with sandpaper in different or one direction, with a knife or other sharp tool, notches and grooves are made on it. You can also use a heated soldering iron for these purposes.

Another option is to melt the edges and outside of the tile using a regular lighter or burner. In this case, the front surface takes on a soft smooth shape.

After painting the tiles in the selected color, its relief will be more pronounced. The paint can be applied before the installation of the tiles or after the wall cladding is completely finished.

Staining can be done with a brush or by spraying the dye composition from a balloon. The main thing is that the paint does not cause dissolution or softening of expanded polystyrene - it is better not to experiment with compositions on an organic basis, preferring water-soluble ones.

Laying of foam tiles is carried out according to wall markings using liquid nails glue, which is applied to the back surface with three points 3-4 mm thick.
The final stage will be the design of the joints between the bricks and rows.
It should be noted that if the design does not provide for the highlighting of the tile joints in a different color, then the coloring of the cladding can be done after the grout solution has dried.

Imitation of brickwork using a stencil

In order to make an imitation of brickwork using a stencil, you will need a cement-based mortar. It is best to purchase it in the form of a ready-made dry mortar for plastering work, since it already has all the necessary additives that make it plastic and easy to work with.

The mortar can be made independently from two materials - a plaster and adhesive cement mixture, which are taken in proportions of 1: 1. To increase the plasticity of the solution, add a tablespoon of liquid detergent per 5 kg of the finished mixture.

The wall must be well cleaned, primed and dried.
The solution can be applied to its surface with a wide spatula or simply by hand with a rubber glove. The thickness of the applied layer should be equal to the thickness of the stencil strips. This moment will depend on what kind of surface the brick should have - smooth or rough.
Further, so that the stencil does not have "stickiness" with the layer of the applied solution and is easily separated from it, it should be moistened with water - this can be done with a sponge or damp cloth. If the stencil is made of rubber, then you can simply dip it into a bowl of water, but in this case you need to wait for its excess to drain, otherwise excess moisture can ruin the whole work.
After that, the stencil is pressed against the applied fresh plaster and gently pressed, so that the relief of the brickwork remains on it.
Further, the stencil is removed and applied further, next to the newly squeezed relief. Here you need to try and attach it so that the masonry is even, and the skew of its horizontal seams does not work out.
When the relief is applied to the entire surface, it is left to dry completely.
After drying, the wall should be completely covered with one color - usually light shades are chosen for this, since it will be easiest to apply any color on them, and also highlight with a dark shade or leave all the masonry seams light.

Painting imitation brickwork is already a creative process, so you can indulge in various fantasies. In this case, of course, it must be borne in mind that the chosen color will set the mood for the entire interior of the room.

Relief of brickwork using plaster and masking tape

For this technology of reproducing imitation of brickwork on the wall, the above-mentioned composition of cement plaster and masking tape will be required. Some craftsmen even use electrical tape, however, it sticks to the wall worse, and high-quality masking tape has excellent adhesion to any surface.

The width of the tape should be no more than 14 mm, and if it was not possible to find an adhesive tape of this width, then you will have to buy a wider one and carefully cut it in half right in the skein. If its edges are not perfectly even, this is not at all scary, since this factor will not affect the accuracy of the relief, but rather even play into your hands.

In the first step, the prepared surface of the wall to be faced is drawn under the brickwork.

Further, along all the outlined lines, masking tape is glued to the wall. It should be fixed so that the edges of the horizontal pieces of adhesive tape extend beyond the edges of the surface to be formed, and no mortar should be applied to them, and the vertical pieces should be well glued to the horizontal ones, always on top of them.
Then, on the surface of the wall, on top of the glued lattice made of adhesive tape, using a wide spatula, a solution is applied, with a layer thickness of 5 ÷ 6 mm - the height of the relief will depend on this parameter. Do not apply too thick a layer, otherwise you will have to cover the seams with grout.
After applying the solution completely to the entire wall, you can walk on it with your hand in a damp rubber glove to create the texture of the surface. If you plan to leave the surface of the "bricks" flat, then you should not touch the layer of mortar.

The most interesting stage in this method of imitation of brickwork is the removal of masking tape, since after this operation the relief of the wall will be immediately visible. Several strips of scotch tape are picked up from one of the free sides and begin to gently peel off from the wall, and as a result, in place of the peeled off tape, seams are formed between the "brick tiles". Having removed the tape from the entire surface, the wall must be left to dry completely.

It is recommended to dry the wall before painting - this operation will make the surface more pliable for the next stage - painting, since the paint will lie flat on the surface and will not be absorbed into the plaster layer. What shades to choose for the wall - it already depends on the preference of the master.

Video: How to simulate brickwork using plaster and masking tape

From all of the above, we can conclude that the construction market has an overabundance of various materials that ideally imitate brickwork or other stone surfaces. Sometimes the quality of the imitation is such that when finished, it is impossible to distinguish it from a real brick in texture and color. Well, if the finished tiles or panels do not fit into the framework of the family budget in any way, then it is quite possible to use one of the more economical methods and decorate the wall using affordable materials.

The most innovative material for interior decoration is considered to be wall panels that imitate brickwork. Such an unusual design fits quite relevantly into the interior of fusion, loft, pop art, hi-tech and others. In addition to the extravagant look, decorative brick panels for interior decoration are quite practical and easy to maintain, which makes them very popular in the consumer market every year.

Features of brick panels

Brick panels for interior wall decoration are a perfect match for any room design. They are in good harmony with decorative plaster, wood, metal and wallpaper of different colors, including gray-dull color.

You can place brick wall panels on one wall, at the corner joints of two surfaces, on the ceiling of a building or in a two-level floor, which is quite convenient in creating an individual interior.

In addition, with the help of such decorative products, you can create a false room for such purposes as:

execution of decorative niches;
visual alignment of wall irregularities;
hiding household communications.

Also, due to their varieties, brick wall panels can imitate irregularities or cracks of real building material. They do not create a load on the foundation of the building and have a number of advantages that are strikingly different from other products for the decoration of premises.

Advantages of decorative brick slabs

One of the main advantages of decorative brick slabs is the variety of patterns that imitate stone. Thanks to this, anyone can create in each room an individual interior to their liking, without the services of a specialized designer. It is also worth noting that natural brick for exterior decoration of a building and interior space has a high price and requires certain laying skills, which makes it difficult for an ordinary person to purchase it or create even walls with a beautiful finish on their own.

Wall panels have a reasonable price and a number of additional advantages for facing the premises:

Self-adhesive panels are easily attached to the surface of the walls, so all finishing work can be done independently, without the services of a specialized master;
Due to the convenient manufactured sizes of the material, wall decoration with brick panels is carried out in a short time;
Wall panels do not need additional restoration, they are initially produced with a finishing finish;
Due to their high performance, brickwork slabs can last more than 10 years.

In the event of defects on imitating products, it is possible to replace certain areas without destroying the entire cladding area. For the installation of self-adhesive products, perfectly flat wall surfaces are not required. They attach well without preliminary work. Cutting of the sheathing can be done with improvised means, which is quite convenient for working at home. In addition, brick wall panels for interior decoration are easy to clean - it is recommended to periodically wipe them with a damp cloth.

Important! Despite its great advantages, finishing products with imitation of building stone are easily deformed from high temperatures. Therefore, in addition to radiators, these brick products, especially made of plastic materials, are not recommended to be placed near open fires, in places such as stoves or fireplaces.

Types of brick slabs

Today, the consumer market offers a large selection of brick wall slabs, which have different textures, colors and sizes. These products are produced from soft and hard materials, which allows them to be used in rooms of different configurations.

For example, soft panels for interior work are able to emphasize individual elements and wall decorations in rooms with a large number of protruding corners. At the same time, due to the elasticity of the material, these panels neatly bend around the corners, which visually reduces their protrusions.

Solid panels are only glued to a solid wall. But despite these limitations, they are also a versatile material for improving indoor interiors.

Consider the types of solid panels in which the natural color is similar to the color of the brick.

Fiberboard

Fiberboard is the most popular model for creating imitation brick indoors. This is due to the fact that such slabs are very difficult to distinguish from natural stone. In addition, they work well with chipboard tongue-and-groove floors, allowing you to create a uniform color scheme in the room. Also, fiberboard panels are considered one of the most durable and practical materials, which prolongs their service life. But when choosing fiberboard plates, it is worth considering that they are subject to deformation from high humidity, so they are not recommended for use in bathrooms and kitchens.

Pvc

The PVC brick panel is also very difficult to distinguish from natural stone. Unlike MDF panels, these boards are highly resistant to aggressive environments, good resistance to moisture and durability. Also, PVC panels are quite light in weight, which simplifies installation work. In addition, if MDF panels for brick need to be periodically painted and varnished, then PVC products are produced immediately in finished form. These products are used both in the decoration of the walls of the room and in the decoration of its ceiling.

Important! Due to the hollow structure, PVC panels have high heat and sound insulation values. Also, the component polyvinyl chloride does not burn in air and is highly resistant to many solvents and alkalis.

Gypsum

Gypsum panels for brick are available from classic red to dark brown color, which is very similar to the color of natural stone. Due to this feature, gypsum slabs favorably emphasize the general idea of the interior of the room. The advantages of this color scheme include the strength and moisture resistance of the material, which allows you to maintain the originally conceived design of the room for a long time. Also, gypsum panels for brick do not deform due to temperature changes and have high sound insulation properties.

Regardless of the material and manufacturing technology, panels for interior decoration are divided into the following types:

sheet plates;
typesetting panels of rectangular shape;
rack boards.

The size of the manufactured products can be varied, their appearance remains unchanged. All decorative wall panels are similar to rectangular building stone material or imitation of an old brick.

Each consumer has his own individual preferences in which area of the room the imitation brick will look better. But still, more rational options were identified by trial methods and recommendations from designers.

Here are some of the best tips to look out for when creating custom building designs:

When creating a partition in small rooms, it is recommended to choose products in soft colors. This option will prevent reboots of the interior and create a beautiful design;
Bright color panels for interior decoration of premises will add an interesting accent to the rooms and will be able to visually highlight the desired areas;
It is not recommended to glue the red brick panel in bedrooms, as their color has the properties of creating emotional overexcitation. These building boards are best used for decoration in nightclubs and restaurants;
It is recommended to use decorative panels on all walls to create decors of an ancient castle or tavern in rest rooms. But it is worth considering that the appearance of such rooms will put pressure on the emotional state of a person;
From stone claddings, you can create a finish on one wall in any room, but when choosing a color, it is better to give preference to non-aggressive tones;
Wood-colored boards will fit well in the study, creating a business style for the room. In addition, panels in the form of bricks under a tree can emphasize the owner's good taste, which can leave a favorable impression of him among his clients;
Light shades of bricks will fit well in rooms where pastel colors prevail in the interior. They are in good harmony with dark colors, creating comfort and coziness. But light masonry creates an imitation of cold, so it is not rational to glue them in bedrooms;
Innovative 3d stone panels are considered the most interesting option in creating a unique style. With their use, you can improve the appearance even of old residential buildings. In addition, these stylized panels can emphasize individuality and create the effect of a real brick in the apartment.

As you can see, due to the variety of types, brick wall panels for interior decoration can be used with different room designs. With the correct combination of the color palette with the interior, an imitation of building stone will be created in the best possible way. Thanks to the embossed or smooth surface, self-adhesive tiles will be able to achieve compliance with the individual preferences of the consumer. Ease of installation will allow you to stick products with your own hands, without the services of a specialist, where each decorative plate will lie flat on the surface of the walls.