Stands from plywood do it yourself drawings. How to make a wooden flower stand - drawings and production procedure
Stand for magazines and newspapers made from plywood is very beautiful. In this article, I will describe in detail that it will be necessary for this and how to make it at home without any experience. Well, proceed. We will make our product from plywood 10 mm.
Tool -lobzik manual with files to it. To complete the work, we need a veil, epoxy glue, wood varnish and sandpaper.
And so we decided that we need to work. Let's start in order, plywood pieces we can buy in the store. Phanelo is chosen clean without cracks and any vices. We take the labzik handmade will learn to work with your hands.
The electric jigsik will not go, there the pinks are wide and we will not be able to make turns to them which we need. Pilking is better to take on the metal they are the same as on the tree, but to cut them is much better. Morilka is now sold different pick up the color you like.
I used under the red tree powder divorced with water. I glued the shelf on the epoxy resin, but you can glue on PVA only take professional glue. The lacquer used the NC on the tree, he dries quickly, you can use other wood varnishes. There are a lot of them.
We buy a shallow and large grain paper. Yes, I almost forgot, we need a drill. Electric drill is that we need, you can use manual.
We will definitely need buttons and copy paper. Now we have everything for work, proceed.
The stand consists of five parts. We need to cut two large walls, two small and bottom of our stand. Let's start with a small sidewall, choose a piece of plywood in size of the details.
Little sidewall
We put a copy of the camera at the top of the drawing at the corners of the drift buttons and the pencil, we supply our drawing. We remove the buttons to remove the drawing and the copy.
Now we need to drill holes to insert a drink through them. Drilling those places that we will cut down. The drill will be needed three millimeters.
Big sidewall
We take the jack. One end of the peel is clamped, and the second we skip through the hole and clamp the screw. I used to hold the Pillar Pillard for Effort, if we tighten weakly, the pilper pops up. I think you have already decided where you will cut.
It should be a well-lit, convenient for you. Immediately I will say that dust will be a lot of carpets of the track immediately remove away, and at the end of the work, vacuuming and wet cleaning. From the beginning, drink the patterns of the middle, drinking one turn the pink and insert into the next one.
Bottom stand
When we drank everything in the middle, proceed to drink the edges of our stand. And so drinking one we do this operation with the rest. When drinking a jigsaw, keep at the angle of ninety degrees so that you did not have oblique.
Saws slowly exactly the feature otherwise then you will wait a long time. It is better to dry longer than then you will spend a lot of time on stripping. When sawing, follow the safety equipment, so as not to impass yourself.
Do not keep your hand in front of the jigsaw in the event of a breakdown of the millet you can paint your hand. See so that you do not darn what you saw. I think you did everything and you saw all five blanks of a stand for magazines and newspapers.
View from above
The next stage of stripping, we will clean the cuts from the pink. Now, from how you drank exactly, it will depend on how much time you spend on stripping. We clean with the beginning of the sandpaper on the largest, and then we go fine.
As well as well, you will read the beauty of your stand. If you are tired, then set aside, and then when the mood will continue. Do not rush to move to the next stage.
Well, if you are all ready to start starving the details of the stand. It must be done before gluing, because the simulator will not wove the surface through the glue. You, I think I decided how to starve
The main rule here is evenly covered with a tassel and rub rag. Look well so that there were no outers and everywhere was blossomed. Do not forget to wear rubber gloves, otherwise it is very difficult to wash your hands after the veil.
Take care of the eyes when hit immediately, rinse with cold water. After the sea, let's dry the details well, and then we proceed to the assembly. This responsible stage will take this seriously. On the template we plan a selection where we will drill holes in a depth of five millimeters, and three millimeters thick.
In every detail we need to drill four holes. Cleash the drill to the drill restrictions on the depth of drilling be sure to do not drill through. This can be done in a simple way. Leaving five millimeters of the drill to make sure to see the slim tape or sticky tape.
Gently drill twenty-four holes. Then we harvest twelve compounds, I used a simple nail three millimeter thick. Saw on metal to cut down the length of nine millimeters twelve pieces
Collect on the dry from the beginning and see if everything happened well. If somewhere it does not fit without lazy, don't begin to glue everything. Let's start gluing and then we will not fix anything. I used epoxy resin for gluing.
We divorce the resin exactly by proportions as indicated in the instructions. Many breeds do not need a third of a teaspoon quite usually. Matching well wrapped the holes in large sidewalls harvested cloves of six to each and combine our product.
If you all happen to put on the floor and press what neither be at the top. See that the stand is not overloaded under load. We give time to dry the glue and proceed to completion. Locate or put something before varnishing on the floor.
All, standing for magazines and newspapers from plywood with your own hands you are ready.
A variety of stands have many functions, most importantly - they are practical and reliable. With the help of these furniture elements, you can diversify the interior of any room, to properly organize space, etc. As the main material for the manufacture of the supports, almost all are used: wood, plastic, iron, plywood, marble, etc. Crafts from plywood for anyone are not uncommon, they are doing for a variety of goals, including decoration of the room or reflecting the territory. For these purposes use FSF or FC. Their characteristics allow for a long time to admire the products, resistance to dampness and temperature drops will allow placing crafts anywhere where the soul wishes. The only difference between these plywood is the glue, which is sampled by layers of veneer. The first version of plywood is too toxic, so they are used only for outdoor work. In order to keep the stands in the room, it is better to use plywood FC. If you decide to make crafts from plywood yourself, it must be able to understand its views and properties. You may encounter ciphers sh1 and sh2 this plywood is single and double-sided. NSh Plywood Processing, which means that you still have to spend time to prepare it for processing. The choice of such parameters depends on where and in what conditions it is planned to be used. For example, plywood is attached on the wall only on one side, but a statuette or stand on all sides.
What plywood to make a stand
Regarding the texture of plywood, here you select on the basis of personal preferences. Plywood from the birch veneer is perfect if you wish to preserve the natural look of the tree. If painting or varnishing is planned, it is better to choose a pine veneer. To paint the finished product, choose paints on an oil or acrylic basis, because they are not so bodied in the sun. His initial view of the stand will retain for several years. It is necessary, when buying plywood, it should be examined for the presence of inclusions and sunsity. Any defects complicate the creation process. If you want to make a stand with a jigsaw, then it is better to choose a thin paneur. In addition to the material, you also need to pick up the tool. Electrical models of jigsaws are more expensive, but they have a number of advantages:
Good speed and cutting accuracy;
Cleaning edges;
It is possible to change the cut parameters.
In general, the tool of this type is important in the farm, because it can work not only with a tree, but also with other materials. It's more difficult to work with a hand tool, the cutting canvases are very often broken, so it is better to immediately buy several spare. In general, make a product with a manual jigsaw to spend a lot of time and pylons, but it will save money.
How to hold a stand yourself
Stand can be made for flowers, for newspapers, and many more different options. But in order not to do, you should always start with the drawing. To work to buy, you need to Faneru, Lobzik, Morilka, Wooden Varnish and Emery Paper. In addition to all this, you can prepare a drill, buttons and copy paper. Further in detail, consider how to make an independent support for logs. Our stand consists of 5 parts, we need to cut down the bottom, two small sidewalls and two large.
We start with a little sidewall, you first need to put a copy of the movie on the plywood. The drawing from above is attached to the buttons, and the drawing will be burned with a pencil. Drill the places you need to cut off. On this, the procedure with a small sideway ended, proceed to large sides. Lobzik One end of the peel to clamp, the second skip through the hole and pinch the screw. A lot of dust will be in the process of work, so the carpets can immediately remove. If there are patterns, they are better to start cut from the middle of the sheet. After the middle, you need to cut the edges of the support, the jigscription in the process of work should be kept at an angle of ninety degrees, then it will not be oblique. I need to cut smoothly and slowly, it is better to spend time on it than to still clean the irregularities. In the process of work, be sure to follow safety technique. The final stage is cleaning from dust, first the emery paper more larger, then shallow. After stripping, the stand should be treated with a verse, it is better to make up to gluing.
The process is simple, the main thing is evenly covering the surface with a brush and lose with a cloth. Do not forget to wear gloves, and in case you get into the eyes immediately rinse with water. We had four details, each you need to do four holes. In total, they will be 24, then you need to prepare twelve compounds. All items to collect on dry and check well whether it turned out. After checking, all parts glue with a suitable adhesive substance. After glue, you need to put a stand and press something hard on top. Be sure to make sure that the product does not bother under load. The process of varnishing is beginning to bottom, only then pass the tassel from all sides. Lacation is desirable to spend in several layers.
Why do you need a plywood stand
Products from plywood is convenient and practical, the stand of it is a very important detail in the room, as you can put a lot of things on it. If a person loves to make her own hands, then the option to make a stand from plywood with your own hands is perfect. In the event that there is a desire, but there is not enough time or some other reasons, the stand can be purchased ready. To make the finished product, it is practical and durable, you need to use high-quality lumber, which offers online store plywood monolith. The store catalog contains the best varieties of products from the largest Russian suppliers and manufacturers of plywood, furniture shields and similar materials. Product purchased here have certificates of quality and safety. Checkout, pay the goods and wait for the delivery without leaving the house.
I want to show you how I did the stands under hot from plywood.
He took the Fanur and painted the circles of suitable size on it.
Then you need to take a hand logs and cut these circles with it.
It is like this :) After that, it is necessary to subwind the surface and edge of the cut slightly to the skin.
Then I took some simple silhouettes and translated them to your billets with a copy paper.
In order to start drinking a drawing, you need to drill in it a hole for a sawmill.
Thus, insert the sawnur and begin to drink along the contour.
And that's what happened.
Then the entire workpiece must be carefully sanded from all sides - outside and inside. I used the usual skirt, grinding lumps, and in particularly thin and uncomfortable places even Natil.
On the back of the coach, I wrote down a congratulation.
Since I hope that the stands are under hot, they will be used for their intended purpose, I did not cover them with varnish, but only a thin layer of olifa applied. Olifu was applied by a conventional foam sponge.
So that the stands do not slide on the table, they need "legs". A piece of unnecessary skin is perfect for this purpose.
I glued leather "legs" glue moment. It was the final chord.
These are such supports from me.
Mobile communications, there are in every home, they have become practically indispensable for a modern person and perform a lot of functions. Therefore, quite often they need to keep not in your pocket, but on the desktop, so the stand under the smartphone is necessary for everyone. There are many ways to make a stand for a phone, but one of the best options is a tree of course, as it, despite its hardness, does not scratch the smartphone and it will look good both in the office and at home on the table.
The easiest way to make a stand for the phone with your own hands from a tree is just to make it from the usual way. The design of such a product is as simple as possible - the groove is made in the board of the desired width and the stand is ready. Since the table has a big plane, and after you put a mobile one in the slot, it will be firmly and reliably standing on the table.
The most important thing in this stand for the phone from the tree is the base area that will touch the table, it must be large enough to cope with the functional load. As a basis, such a homemade stand for the phone can have any wood and it can be given any forms. And the manufacturing process itself is limited by the fact that in the table with a milling mill, the groove is simply made. The grooves can be done smooth or under a slope, depending on how the device should stand.
When you make a stand for a smartphone with your own hands, it is important to polish it well, especially in the area of \u200b\u200bthe groove where mobile will stand. After all, if there are irregularities, then you can scratch the glass, and this will spoil the appearance of your gadget.
Complex design
If you want your mobile device to be always in sight, not lost in the documents and at the same time your table looked beautiful, solid, then the stand must be appropriate. To do this, you can make it not just from the plank, but from several details. You can, do not worry for this, too, do not need a lot of tools or material. The most important thing is not to rush and thoroughly consider the design that your homemade will have.
A good stand for a smartphone with their own hands, which will not only suit any phone, but also for the tablet, and at the same time will be as stable as possible, you can make two small does.
The design of such a stand is as simple as possible, two identical wooden billets of rectangular shape are taken. On the one hand, approximately, a quarter from the edge is made a slot to the middle of the board. It is important that the slot goes not at a right angle, but an imagination that the stand is more stable, and had the right slope of the plane that will support the phone. On both billets, the slot is made to half the width of the workpiece.
For someone who is just starting to work, can be problematic to choose the right corner for the slot. But it is easy to do it, it is enough just to attach two details one to another under the planned angle and just make the mark on the side at the end. Well, in addition, that the phone does not slip out, you need to make a groove on the horizontal plank, or stick a small bar, which will be a stopper.
After all the slots are ready, it is enough to finely polish the stand so that the irregularities do not scratch the phone body, and cover it with tinting or just varnish.
There are many ways to make a stand under the phone of such a design, for example, you can make a curly vertical part of the stand, which will significantly improve its appearance. Forms can be a wide variety of hand, leaf, animals and in general everything you think of, as a tree can be given almost any shape.
How to choose a stand design
There are quite a few ways to make a stand for a smartphone, but vessels from wood are different not only in durability, and a beautiful view. In addition, they look and much noble than other materials, since the properly chopped wooden accessory will decorate any design regardless of its style.
Therefore, so that your stand for a mobile phone made with your own hands was beautiful and original, try to choose to choose the design, size and color. Of course, you should not forget about such parameters as functionality and stability, since the cellter may simply be damaged.
You can make a variety of accessories for the phone at home and for this it is not necessary to have a special tool. In most cases, it is possible with due diligence and patience to do with a simple hacksaw, a chisel, a skirt and a piece of plywood. Then just glue your sample from small parts and at home this will also be easy.
Do not be afraid to experiment and dream so that the stand you make is unique, and not like everyone else. After all, mass production has been established in such a way that anyone can afford to buy beautiful and the first kind of a variety of things. But truly bright individuality prefers unique things in a single copy. Such things in stores are not sold, they can only book or do it yourself. The second option is much better, not only in terms of savings, but also in terms of manifestation of individuality.
Even if you have no experience in the manufacture of any crafts from the tree, do not be upset, because there is nothing complicated. It is quite carefully planned to plan, calculate what instruments will need, materials and only after that begin to work itself. If you can't do something, then you can try again, it is rare who it turns out to do everything right from the first time, everyone learn and all make mistakes. But this is the only way to gain experience and learn how to do everything right.
All photos from the article
The desire to realize your creative plans is clear. Not everyone is given the ability to turn a wooden board or chock into a work of art, but to create a masterpiece from plywood or at least a cracker who will fit beautifully in the interior, and it will still be useful for many. What crafts from plywood can be made like from simple fragments to collect a nice puzzle - our instruction will tell about it.
From simple to complex
Starting work with a layer, namely, is plywood, start with simple things that will be useful in everyday life. Later you can assemble more complex designs, decorate them with intricate patterns and really turn into a work of art.
But it later, but still figure it out with your capabilities.
At first, you can do:
- flat products that do not require special skills, but allowing them to acquire them. These products include: a stand under hot plywood, various decorative hangers, where hooks are attached to having an unusual shape, flat figures for the playground or for decorating a garden or garden;
- uncomplicated plywood stands, where in fact, you design the elementary volumetric model of the homemade, while loading it with useful features;
- the simplest mechanical toyswhere the fixation of the details towards each other occurs at one point, and the movement of the fragments is carried out in a simple way - to the rope.
Our reference!
Later, having understood with simple discharge and assembly techniques, you can go to more complex models - both in the artistic plan and in functional.
After all, it is possible from plywood, beds for various machines, and even the means of movement, for example, small boats are great from this material.
Blacking Future
Drawings are needed not only for complex structures, but also for simpler things. Even the windowsill from plywood requires a drawing, for the most accurate fitting of the product to the future bed, as well as accounting for the fastening system.
The drawing can be fully drawn on paper, or only its individual elements.
What is meant:
- simple flat products, for example, the circles of the stands of a certain diameter can be immediately drawn with a circulation on plywood. Certain internal fragments, for example, the contours of animals, representatives of the flora, household items, and so on it is better to portray first on paper, and then transfer to Phaneur;
- complex drawings, for example, the drawings of the candlestick from plywood are immediately made on paper. Their appearance and sizes are determined, and only being transferred to Phaneur later.
