The idea of ​​a good repair is rapidly changing with the advent of new design ideas and receptions. Previously, the pinnacle of skill was considered to be evenly glued wallpaper with a correctly selected edging in the form of a multi-colored paper strip, and sometimes even an ordinary tape. Today high quality finish walls and ceilings is impossible without the use of baguettes. Agree, competently combining two planes into a single ensemble is a guarantee of comfort and beauty in the room. In this article, we will look at how to properly glue the baguettes to the ceiling so that the renovation looks complete.

Baguettes in the interior emphasize the sophistication of the design of the room.

The use of baguettes in the interior

The material has several significant advantages:

• allows you to hide visible defects in walls and ceilings - irregularities, roughness, drops;
• decorates the junction of the wall and ceiling;
• easy to install, does not require special skills;
• light and flexible material;
• rich design choice;
• allows you to significantly save money due to an affordable price.

Before choosing a ceiling molding, you should know that it can be made of various materials, be different in texture, width, smooth and patterned. Not only the price depends on this, but also its purpose, features of use for different interiors.

Baguette, aka molding, ceiling plinth or a frieze, can be made of foam, polyurethane, plastic, wood or plaster. Most often, the first two types of baguettes are used, plastic ones, for example, are used only with stretch ceilings, and wooden ones - in conjunction with the same ceiling.

Wooden baguettes go well in an interior where there is already wood.

Surface and tool preparation

In order for the ceiling plinth to adhere well and hold securely, you need to properly approach the preparation of the surface and the preparation of the glue. Professional builders believe that there are two ways to glue the baguettes. The most common and proven method is when ceiling skirting boards are first glued, all gaps and drops are eliminated, and then wallpaper is glued. Some apartment renovators glue baguettes over the wallpaper, although this method is more complicated, because it will be difficult and inconvenient to process gaps and unevenness with putty.

In order for the baguettes to hold well, you need to process the surface. First you need to remove roughness, irregularities with a sandpaper, then be sure to clean the ceiling and walls of construction dust, and then treat with a special primer.

The success of gluing baguettes depends on their availability and quality. Professionals advise to have the following tools with you:

• putty knife
• sharp knife with replaceable blades
• miter box
• paint brush
• pencil
• roller

You will also need a foam sponge, an adhesive mixture, finishing putty... Armed with everything you need, you can safely start gluing baguettes to the ceiling.

Step-by-step instruction

Correct marking and cutting of baguettes

Before gluing baguettes to the ceiling, you need to calculate required amount planks so as not to look for what is missing later or throw away unused ones. The calculation is simple: we calculate the perimeter of the room (here to help you school program for grade 2). Divide the resulting number by 2, since such is standard length ceiling baguettes. For marriage, trimming corners, we sketch out 2-3 slats. It should be remembered that in prominent places it is advisable to use whole strips of baguettes so as not to spoil general form in small pieces.

Now you know how to properly glue the baguettes to the ceiling. But remember that the material must be cut correctly. So that the pancake is not lumpy, and a good half of the materials do not end up in the garbage, it is better to use a special device for cutting baguettes - a miter box. With its help, you can make the corner joint almost perfect, because in ordinary apartments perfectly flat walls and ceilings are rare.

You can cut the baguettes exactly and precisely using special device- miter boxes

No miter box - it doesn't matter. We offer step by step instructions for cutting baguettes without using a miter box:

How to glue a baguette to the ceiling

You can glue the ceiling plinth using a finishing putty or special glue.

If you settled on the first option, then the mixture must first be prepared. The procedure is simple: put putty into a container with water, mix with a mixer. Some add a little PVA glue to increase strength.

Then, the mixture is applied to the edges of the baguette in an even layer using a spatula. The plinth is applied between the ceiling and the wall and pressed. With a spatula and a sponge, remove excess putty, cover up cracks, irregularities, joints.

Most often, polymer adhesives such as "Titan", "Moment", or the so-called liquid nails are used to glue baguettes to the ceiling. The disadvantage of these compounds is that they smell unpleasant, they are afraid of moisture. In order for the baguette with the applied adhesive to "grab", you need to press it against the wall and ceiling for several minutes. The glue will reliably hold the baguette for a long time, but it will not work to mask the joints, cracks and irregularities.

Sticking under a stretch ceiling

For many, the issue of gluing baguettes under a stretch ceiling causes fear and certain difficulties. But the wolf is not so terrible as it is painted. The procedure has its own characteristics, which you will now get acquainted with.

The features of gluing baguettes under a stretch ceiling are as follows.

1. Cutting should be done not under the ceiling, but on the floor, so as not to damage the film
2. The baguette is glued only to the wall, so the adhesive solution is applied only to one side that is in contact with the wall
3. A strip of paper is inserted into the gap between the baguette and the stretch ceiling, and then the baguette is painted.

Baguettes look organically under a stretch ceiling.

Taking into account all the tips presented, you can easily solve the problem of how to glue the baguettes on the ceiling without extra costs... Successful repairs to everyone!

toppotolok.su

How to glue baguettes to the ceiling: methods and instructions

Despite the seeming simplicity, gluing a baguette (plinth, fillet) to the ceiling can be a serious undertaking. In order not to slow down the repair for a couple of days and not to spoil the material, you should read the detailed instructions on how to glue a baguette to the ceiling.

How to glue baguettes to the ceiling

Let's start with the fact that baguettes are decorative ceiling plinths with different width and appearance, which are made of various materials: wood, plaster, plastic, polyurethane of different density. As a result, they harmoniously form the junction of the wall and ceiling, giving the room aesthetic appearance and completeness.

Baguettes are glued close to the ceiling or indented from it, if it is planned to carry out led lighting... They can be of different colors, laconic shapes or decorated for modeling. Baguettes are easily painted during use. Under the ceiling skirting boards, you can hide the wiring and wallpaper flaws in the case of uneven walls (for this purpose, wide ceiling curbs are usually chosen). The wall decoration will look good only if the baguettes are glued evenly and correctly.

Types of ceiling plinths

Table. Key features different types ceiling plinths.

Note! Plaster skirting boards are often glued in in public places(restaurants, hotels); they look ideal in rooms with high ceilings, but for low ones - below 3 meters - it is better not to use them.

What is required for gluing baguettes

To glue the ceiling plinths neatly and evenly, you will need a sharp knife, a hacksaw and a miter box, a pencil and special glue for expanded polystyrene (or other material from which the baguettes are made). Other adhesives can be selected.

Sealant as an alternative to glue

Surface preparation

It is assumed that they start gluing baguettes after leveling the walls and painting or wallpapering them. If the walls are uneven, they need to be leveled (with putty, plaster, etc.), especially if gluing is planned gypsum stucco or wooden skirting boards. Styrofoam products can be pressed in such a way that they hide the unevenness.

Leveling the walls with putty. Dilute the dry mixture with water according to the instructions on the package. Then, pouring some putty on a putty knife, fill in all the grooves you see with it. For a perfect surface, the filler is applied over the entire surface. The last layer level with a wide trowel, guiding it along the entire length of the wall.

In the same way, a section of the ceiling is being prepared, to which the baguette will be glued (read about aligning the ceiling with your own hands). If the ceiling is completely leveled and painted, then no finishing works do not need to be carried out. If you plan to first stick the baguettes, and then paint the ceiling with them, then you can cover the area where the baguette will be glued with a primer.

There are objections that the baguette needs to be glued in front of the wallpaper. This procedure also has the right to life, but it's still easier to first stick the wallpaper, and then on top - the baguette. If planned further painting baguette, wallpaper can be covered with polyethylene.

If the baguette is not glued end-to-end to the ceiling, but with a margin for styling led strip, for convenience, you can mark the bottom gluing line. To do this, in each corner at a certain distance from the ceiling (for example, 3 cm), small nails should be nailed along the perimeter, to which a strong thread should be tied. Along this thread, applying a baguette, you need to mark the bottom gluing line with a pencil.

Methods for mounting a ceiling plinth

Baguette preparation

The skirting board can be cut to length during the gluing process. It is better not to do this in advance, especially in the absence of experience, so as not to make mistakes in measurements.

The first baguette and all the others that reach the corner will have to be cut with a miter box. You can, of course, cut the polyurethane foam baguette with a sharp knife, but this requires the appropriate skills.

How to cut a corner

Cutting a baguette at a corner is not as easy as it seems at first glance. The problem is not the difficulty of even cutting corners at 90 or 45 degrees (everything is simple here, especially with the use of a miter box), but the fact that often the corners in the room are crooked and do not reach those same 90 degrees. Therefore, you have to fill up the cracks with putty.

If possible, you can use decorative inserts for decoration. Decorative inserts sold for both external and internal corners. It's easy to install them. The baguette is cut at a 90 degree angle and joined with the inserts. The only disadvantage of this method is the extra costs.

Ceiling plinth corners

Most craftsmen use a miter box. To decorate any corner, you first need to attach a baguette to the corner of the room and visually see where the cut line will be located. The fillet is placed in the miter box so that the edge of the ceiling is at the bottom. The product is held by hand, the excess part is cut off. Right inner corner is cut from left to right, and left - vice versa. This is how you cut the inner corner. To cut an outside corner, the cutting direction is reversed. Here, the edge should be longer, which will be attached to the ceiling. Cutting for the right corner is necessary from the right - to the left, for the left - vice versa (this process is described in more detail in the article on how to cut the corners of the ceiling plinth correctly).

Using a miter box to cut baguettes

Cutting scheme for ceiling plinth

If, at the end of the work, a gap nevertheless formed, you can cover it up with putty.

Trimming baguette corners using markup

Step 1. Sticking the baguette should be started from the corner of the room, located at the entrance. You should immediately stock up on wet wipes to remove excess glue mass. Glue is applied along the edges of the baguette and on the joints, either dotted or in a line. The baguette is applied to the markings and pressed tightly against the wall. The pressing time must first be seen in the instructions for the glue. Any excess glue that has come out must be removed with a damp cloth.

Step 2. Next, you should move along the perimeter of the room, measuring the required length of the next segment each time and cutting off the excess. The corners should match and adjoin as much as possible. You need to press the baguette against the wall with the entire surface of your palm, and not with your fingers, otherwise dents may remain.

How to glue a polyurethane baguette

Step 3. After the baguette is glued around the entire perimeter, the joints must be putty and wait until the glue and putty are completely dry. Then everything is carefully rubbed with fine sandpaper. The baguettes can be dyed along the entire length.

After the putty has dried, the places where it has smeared or protruded out can be wiped off with a damp cloth.

Painting in one color with the ceiling will allow you to achieve a visually uniform composition. During painting, the wallpaper can be protected with plastic wrap and adhesive tape.

If it is decided to glue the wallpaper after gluing the fillet, then the overlap of the upper cut of the wallpaper with a spatula is pressed against the baguette, and the excess is cut off with a construction knife. This is a very time consuming procedure.

Be careful when finishing

Wooden ceiling plinth is used for decoration classic interiors, country, chalet, etc.

A wooden skirting board has a number of advantages - in particular, it:

As for the disadvantages, when compared with polyurethane, wooden skirting boards:

But these are all surmountable difficulties that are more than covered by the stunning appearance of the room, decorated with natural wooden moldings.

To fasten a wooden molding, you will need a screwdriver, wood screws, miter box, sandpaper, and a pencil.

Step 1. First, the condition of the walls is checked - they must be even.

Step 2. The markup is performed.

Step 4. If the baguette is not wide and light, it can still be attached to liquid nails.

Step 5. If the baguette is wide and heavier, it is attached with self-tapping screws. For convenience, you can preliminarily attach a wooden baguette to glue to hold it, and then fix it with self-tapping screws or screws. The latter must be fastened in a secret so that the caps do not rise above the surface. Each subsequent baguette is measured in length, cut with a hacksaw or into a corner using a miter box.

Step 6. After the entire perimeter of the room is decorated, you should process the joints and places of the caps of the screws with wood putty, wait for it to dry, and clean it with fine sandpaper.

Step 7. Then all joints are varnished to match the color of the baguette.

Often a wooden molding is attached to the same wooden corners, which are attached to the wall with self-tapping screws at a distance of 30-50 cm from each other. First, such support platforms are attached, then a plinth is attached to them. Everything else is described above.

PVC skirting boards are lightweight, functional and aesthetic, they help to create unique interior solutions. Such baguettes are used in the decoration of ceilings or walls with plastic panels, which is most often found in bathrooms and kitchens. They have a special groove for mounting. Baguettes come usually complete with panels and are designed to mask joints with walls and ceilings.

Plastic skirting board is different in that it:

Installation features depend on how they go plastic panels- on the ceiling or wall. First, the frame is attached. The frame rail is on / under the ceiling and will be the basis for the plastic molding. pay attention to PVC device baguette - one of the sides is made in the form of a tongue-and-groove, into which the lining will be inserted.

The ceiling fillet is installed on a sub-ceiling strip. It is attached with brackets or self-tapping screws to the frame (if it is metal, then with self-tapping screws for metal). For the design of corners and for joining parts, special connecting parts, which can be additionally attached to the glue. If after fastening there are gaps, they are lubricated with silicone.

Here you immediately need to make a reservation that the baguette in this case closes the joint between the ceiling and the wall, but is not attached to the canvas. There is always a small free space between the skirting board and the canvas (or large, if the backlight will be mounted there).

For decoration, you can use any fillet: foam, wood, plaster. When choosing a model, it is better to take into account the features of the mount and dwell on the option with a wide vertical side. Installation of skirting boards does not differ from the traditional one, except that only the vertical surface is glued. You can find out more about this at the link below.

Thus, any skirting board can be attached independently, decorating your home inexpensively and tastefully.

potolok-exp.ru

• home
• Accessories
• Skirting boards and baguettes

1. Materials and tools

The ceiling molding serves not only to hide the gaps between the ceiling and walls, it is also decorative element, capable of giving the renovation a finished look. You can see how the surface of the ceiling with the ceiling plinth looks like in the photo. Many do not even think about how to glue the baguettes to the ceiling. It seems to them so easy task that they don't think about any of the nuances in this work. But in order for the result to please for a long time, you should adhere to some rules.

Before moving on to how to glue baguettes to the ceiling, you need to prepare the following materials and tools:

• hacksaw for metal;
• pencil;
• sponge;
• miter box;
• soap solution;
• sandpaper;
• level;
• brush;
• glue or liquid nails.

As for how to glue the baguettes to the ceiling, this can be done with both glue and liquid nails.

How to glue baguettes to the ceiling, in detail on the video:

pod-potol.com

How to glue a ceiling molding correctly

Sticking baguettes on the ceiling

How to glue baguettes to the ceiling, how to cut it, how to glue material in the corners, this article will tell you. If earlier the angle between the walls and the ceiling was covered with a panel or a strip of embossed paper, now the curvature of the walls and ceiling smooths out the baguette or the ceiling plinth better. It gives the room unique view, hides some misses during renovation works... How to glue ceiling moldings?

Features of using baguettes

When installing ceiling plinths, several of their advantages can be distinguished:

• A ceiling molding hides visible defects that may be on the walls and ceiling:

1. slight irregularities;
2. some roughness;
3. differences in marks.

• Decorate the joint between walls and ceiling.
• Simple and easy to install, no special skills required.
• Lightweight material and flexible.
• Wide range of designs.
• Affordable baguette price.

Tip: Before gluing baguettes to the ceiling, you need to know what various materials, with a different texture, width, can be smooth and patterned. This affects the cost, purpose and application features for different interiors.

For the manufacture of a baguette, molding, ceiling plinth or frieze, are used:

The most popular foam and polyurethane products, plastic products, for example, are used only with stretch ceilings (see PVC baguette for stretch ceilings - differences in types, their advantages and disadvantages), and made of wood - with a device wooden ceiling.

What glue is used for mounting baguettes

For each master, when installing ceiling moldings, there is his own glue, tested in work, which can be:

• Polymeric. Such a composition has poor adhesion. In order to glue a foam baguette using polymer glue, it will need to be held in the required position for a long enough time, which is not very convenient for a two-meter product.
• Acrylic.
• Silicone based.

Acrylic and silicone adhesives allow quick and easy installation of the ceiling plinth. They go on sale in tubes for a pistol. The composition is applied quite easily, and the diameter of the outlet spout controls its consumption.

When purchasing a ceiling molding, it will tell you how to glue it with acrylic and silicone adhesives detailed instructions attached to the material. The disadvantage of such adhesives is their high cost, which is especially noticeable when performing work in a large apartment or house.

The cheapest option for gluing a baguette with your own hands is the usual finishing putty or glue used for drywall, if used during repairs. Such a composition is more reliable, hardens faster, which allows painting the ceiling and baguettes in half an hour, without fear of damaging them with a roller.

The disadvantage of using putty as an adhesive is the lack of convenience when working with it:

• Such building mixtures it is not very convenient to apply a thin layer on a baguette with a spatula.
• After gluing, the remaining putty or drywall glue will need to be carefully cleaned with a wet brush. Otherwise, clots of dry mixes will become visible from under the paint.

How to glue skirting boards to the ceiling

Tip: Installation of the skirting board should be started from any corner of the room.

The ceiling molding can be mounted in two ways:

Tip: Usually baguettes are white, therefore, before work, be sure to wash your hands well with soap and water to prevent contamination of the products.

The process of gluing a baguette is quite simple, but problems arise with cutting corners.

Subtleties of work technology:

• Special attention should be given to cleaning the ceiling and walls from the presence of traces of glue. Remove acrylic and silicone compounds with a rubber spatula and a damp cloth. When gluing the baguette to the putty, the excess is removed with a small brush well moistened with water.
• All gaps between the baguette, ceiling and walls must be carefully filled with glue. The same should be done with the joints in the corners of the ceiling plinth.

Tip: You cannot expect that such gaps can be masked with paint or gluing wallpaper on the ceiling, this will not work. Glue smeared on the ceiling and walls must be carefully removed.

• When joining straight sections, often when the glue dries, the edge of the baguette floats down and a step is formed. To avoid this, the joint of two adjacent skirting boards must be chopped off in the desired position with needles. After the glue has dried, the needles are removed, and the resulting small holes and dents are carefully covered with the same glue or putty.
• Baguettes are painted several times. The first layer - a primer, allows you to hide all putty joints, and all the rest - decorative layers, are performed simultaneously with painting the ceiling.

Sealing gaps between ceiling and skirting board

• Excess glue on the baguette is cut off as shown in the photo.

The birth of a new design idea leads to the emergence of new design elements. Thanks to this, the concept of repairing and updating the interior of an apartment is constantly changing. More recently, a high-quality renovation meant pasting new wallpaper and decorating it with edging in the form of multi-colored strips of paper. Modern finishes involves the use of baguettes that are able to harmoniously combine the plane of the wall and ceiling. To create a comfortable and cozy atmosphere in the room, you need to know how to properly glue the baguettes to the ceiling.

The main characteristics of baguettes

A ceiling molding, as an element of decorative design, has several names: plinth, frieze or molding. However, they all have several rather important advantages:

• The ability to mask minor defects in walls and ceilings at their junctions. In particular it comes O small irregularities, roughness and height differences.
• Possibility to decorate the corner formed by the walls and ceiling.
• Not complicated assembly work allowing the whole process to be carried out independently.
• Low weight and good plastic properties.
• A wide range of colors and textures.
• Affordable cost for most consumers.

When choosing baguettes for the ceiling, one should take into account the material of manufacture, size, texture and type of surface of the products. Depending on the combination of these characteristics, the cost of the design elements is determined. In addition, it is important to understand how to properly glue the baguettes.

The following materials are used to make baguettes:

• Styrofoam.
• Polyurethane.
• Plastic.
• Gypsum.
• Tree.

The first two options are used more often than the others and are suitable for any type of design. Plastic baguette installed together with tension ceiling structures, wooden elements only suitable for wooden ceilings.

The choice of adhesive

For high-quality gluing of moldings, only proven adhesives should be used. You should know for sure that to resolve the issue of how to glue a baguette for the ceiling, the following means can be used:

• Polymer glue... This composition is characterized by weak stickiness, therefore, gluing the molding is accompanied by slight pressure and holding the element in the places of gluing for some time. This procedure is especially troublesome when using long elements.
• Silicone and acrylic adhesive... Both formulations are characterized by fast adhesion with work surface, which makes it easier to decide how to glue the baguettes to the ceiling. Factory packaging of glue in tubes for a gun several times facilitates the solution of the problem of how to glue the baguette. Thanks to the thin spout at the tip of the device, you can control the consumption of glue during operation. Of the disadvantages of such formulations, only the high cost attracts attention.

• Finishing putty or formulations for working with plasterboard structures... This option for solving the problem of how to glue the baguettes to the ceiling is considered the most profitable in terms of savings. Although the reliability and drying time are over high level... However, you should be aware that the filler is very difficult to apply on the surface of the baguette in a thin layer. In addition, excess glue or putty must be removed immediately, otherwise it can be very badly damaged. appearance baguette and ceiling.

The process of gluing the ceiling plinth

Baguettes for ceiling decoration are glued in two ways:

• Before wallpapering.
• Over the pasted wallpaper.

In most cases, baguettes are pure white, so it is important to carry out installation work with absolutely clean hands. Before gluing the baguettes, you must wash your hands with any detergent.

Gluing ceiling plinths has several features that you should learn about for a high-quality installation process:

• Any excess adhesive or putty must be removed immediately with a suitable tool. To clean the surface of silicone and acrylic compound, you can use a rubber spatula or a damp cloth. The putty can be easily removed with a small wet brush.
• Slots around the skirting board and corner joints should be filled completely with adhesive. It must be remembered that these places cannot be masked with paint or wallpaper.

• So that in the process of solving the problem of how to glue the baguette on the wall, the edges of the product do not depart from the plane, you can use ordinary pins or sewing needles. With these devices, two adjacent edges are fixed, and after the glue dries, they are removed. The resulting holes can be covered with a thin layer of filler.
• Painting ceiling moldings should be multi-layered. The first layer is a primer that masks the sealed joints and holes. The second and subsequent layer - simultaneous decoration ceiling and baguette.

How to properly glue baguettes over wallpaper

The advantage of this option is that there is no need to adjust the wallpaper to the line of the baguette, since this element masks all the errors of the upper edge of the wallpaper.

The question of how to stick a baguette on the ceiling is solved in a certain sequence:

• Using a miter box or other device, cut the edges of the plinth at the desired angle.
• A thin layer of adhesive is applied to the surfaces that will adjoin the plane.
• The product is applied to the wall and held for a certain period of time. Most often, the manufacturer gives recommendations on how to glue baguettes using one or another composition.
• Excess glue is removed with a rag or spatula.

• The junction of the baguettes is covered with white sealant.
• A layer of finishing paint is applied to the surface of the glued baguette.

The question of how to glue baguettes to wallpaper can be considered resolved.

Securing the skirting board before wallpapering

This option is most often used by professional craftsmen. Sticking baguettes to the ceiling in front of the wallpaper must be done according to the following scheme:

• Walls and ceiling are carefully leveled, polished sandpaper, cleaned from construction dust and covered with a primer.
• The ends of the moldings are cut at a specific angle using a miter box for greater accuracy.
• Put putty or drywall glue on the plinth to be glued, trying to fill all the cracks.
• Press the baguette against the wall and leave the filler to harden completely.
• The surface of the molding is primed and applied in several layers topcoat on the baguette and ceiling.
• Wallpaper is pasted on the wall, while the overlap on the baguette is cut with a sharp knife, applying a wide spatula.

Installation of skirting boards in corner joints

The last plank must be cut with the smallest error to avoid damage to the elements when gluing baguettes.

In a room with flat walls, the planes of the ceiling and walls, as well as two walls, are connected at right angles. You can trim the edges of design elements using a miter box. Before gluing the baguettes in the corners, first of all, the corner edges are trimmed, then using a sharp knife or other tool, the baguette is cut to the desired length. Step effect can be prevented uniform distribution gaps between two segments.

Cutting the skirting board with a miter box can be done as follows:

• The product is placed in the instrument, trying to achieve a position like on a ceiling.
• Lower part the skirting boards are very tightly pressed against the side of the tool.
• Cut the edges.

If there is no such device at hand, then you can use another option:

• The baguette is applied to the left side of the corner and a short line is drawn along the product.
• Apply a design element to the right side of the corner and do the same.
• The intersection of the lines defines the starting point for cutting.
• Alternately, on the slats, mark the intersection of the lines and make a cut at an angle of 45 0.
• The correctness of the cut is checked by placing the plinths on the corner.

The solution to the question of how to stick the baguette is not particularly difficult. Following the recommendations of experienced craftsmen, you can complete the entire installation process with your own hands.

Repair is a serious thing, but simple, if the algorithm of actions is clear, taken the right tools and quality components are used. Let's try to consider one of the constituent parts in interior decoration- baguettes.

Definition

Baguettes are decorative plinths or borders made of polymer materials, which ultimately look like molding, complementing the accuracy and aesthetics of the finish. They are usually sold in 2.5-3 meter cuts, are easily trimmed with a construction knife, and can be applied using:

• silicone glue;
• liquid nails;
• other polymer adhesive.

First, let's look at how to properly glue baguettes to the ceiling and walls, and then let's take a look at why most people do this procedure differently.

How is it correct?

There are two conflicting opinions. Some believe that baguettes are glued to the ceiling as the final finishing touch, that is, it happens on the wallpaper or on the walls with another decorative coating... Others argue that it is correct to first glue the baguettes, and then deal with the wall decoration. Where is the truth? In fact, both are right, but in different cases.

If the walls are even, prepared, and the angle between the walls, ceiling and walls is 90 degrees, of course, baguettes are glued first, which ultimately also allow you to evenly adjust the wallpaper or plaster. But if the walls are uneven, the corners walk and there is no way to fully align them, then, of course, the baguettes are glued to the wallpaper or decorative trim.

Therefore, if you hear a categorical opinion about the need to choose one or another method, you should evaluate specific situation and the ability to prepare the walls. Only after that, take decisive action. Also, a lot depends on the glue. If there is no alternative, then on paper wallpaper baguettes can be glued with ordinary PVA. However, in other cases, if the wallpaper is, for example, vinyl or non-woven, there is no expediency to glue the baguette on PVA, it simply will not hold.

Materials and tools

Now let's see what kind of inventory is needed in order to glue the baguette with high quality. Let's take a look at which adhesives will be the most convenient and practical. So, for work you will need:

• a construction or office knife with a replaceable blade;
• simple pencil;
• polymer glue or liquid nails;
• hacksaw;
• level for determining the angles;
• a brush for applying glue;
• miter box for corners;
• soap solution;
• a hard and soft piece of cloth (hard - to degrease the surface, soft - to wipe the glue).

As for the adhesive composition, silicone glue, liquid nails or an adhesive such as "Titanium", "Moment" will be ideal. If using liquid nails, you will need construction syringe... It is very important to degrease the surface when applying any glue, a soap solution will help with this. If this is not done, after a while the baguette will simply lag behind the walls.

Count

It is also important to correctly calculate the amount necessary material... For example, the length of the baguette is 2.5 m, and the length of the walls is 4 and 3 m. In this case, you will need 3 baguettes, even taking into account the trimming of the corners. It is considered this way: on a wall of 4 m, 1 solid strip and a piece of 1.5 meters are needed. On a wall of 3 meters - 1 solid and a piece of 0.5 m.However, in order to achieve greater symmetry, equal cuts of baguettes can be joined in one place. But in this case, the material consumption will be much higher. For example, on a wall of 4 meters, 2 pieces of 2 meters will go. This means - 2 baguettes in the same way as on a wall of 3 meters.

Algorithm of actions

After the tools and materials are prepared, it is necessary to prepare the surface and the baguettes themselves. If liquid nails are used, application will be done with a syringe, pointwise, depending on the width of the baguette.

First you need to decide whether the baguettes will be glued after the walls are finished or before that. If before finishing the walls, they must be leveled. Most likely, even the smoothest walls at first glance will have discrepancies. And if the corners are not finished, gluing will be difficult. Moreover, most likely, one or both edges will lag behind. If they are carefully pressed down, the material will simply go in waves due to its elasticity, which, of course, will affect the accuracy of the finish. If it is not possible to fully align the walls, you must at least align the corners. For this, you can use special metal corners and putty.

For the convenience of aligning the corners, you must use a level. Be sure to clean and prime the surface before further work.

After everything is prepared, you need to make the markup. To do this, the baguette is applied to the wall and marks are made along the outer lines with a simple pencil.

It is advisable to cut the material using a miter box - a tool that allows you to cut at any angle. As a result, this will allow you to cut the corners evenly.

It is necessary to apply glue along the edges on both sides. The excess is removed with a soft cloth dipped in soapy water.

You can start gluing from any angle. Usually, as with wallpaper, pasting starts from the window.

It is necessary to carefully consider the joints, especially if there are protruding parts of the wall, columns, etc.

It is enough to hold the baguette after being applied to the wall for 10-15 seconds. This time is sufficient for the initial setting of the adhesive.

After the baguettes are glued, you can continue finishing or do other work if the baguettes are glued to the finished walls.

Summary information

In conclusion, it remains to add that it does not matter what kind of wallpaper or decoration on the walls, the selection of a baguette depends on the height of the ceilings. If they are at least 2.4 m, and the room is at least 7 "squares", you need to use a baguette at least 5 cm wide. With high ceilings and big room, over 15 "squares", it is better to use a wide baguette - from 10 cm.

And one more piece of advice. No haste is allowed in the selection, preparation and application of building materials. It is important to do everything consistently and balanced, then the result will meet the requirements and desires.

Concept of high-quality repair changes with lightning speed with the birth of fresh design elements and ideas. In the recent past, neatly pasted wallpaper in combination with the correct edging, which is multi-colored paper strips, and sometimes even ordinary tape, was considered the height of skill.

The modern decoration of the apartment cannot be imagined without baguette decoration. Indeed, a true, harmonious combination of a structure from two planes is a guarantee of the beauty and comfort of a room. Let's dwell on how to glue baguettes soundly so that the finish looks exemplary.

Properties and features of baguettes

The use of such decorative elements has a number of significant advantages:

• great disguise small defects ceiling and walls, such as drop, roughness and unevenness;
• decoration of the junction of two surfaces;
• simple installation that does not require professional skills;
• lightness and flexibility of the material;
• large selection of designs;
• saving money due to reasonable prices.

Advice! Before choosing baguettes for the ceiling, it should be borne in mind that they can be made from different material, be of various textures, widths, have a smooth or patterned surface. These qualities affect not only their cost, but also their purpose, differences in application for a variety of interiors.

A baguette, also called molding, ceiling plinth or frieze, is made of materials:

• polyurethane;
• foam;
• plastic;
• gypsum;
• wood.

In most cases, polyurethane and foam baguettes are used. Plastic molding is used only under stretch ceilings, wooden - in conjunction with the same ceilings.

We select the right glue

Each experienced master for the installation of the frieze, he uses an adhesive composition tested with his own hands. Such funds can be:

• polymeric;
• acrylic.

Polymeric the composition is characterized by low stickiness. In order to securely fix the molding with such glue, it must be held in the desired position for a rather long time, and this is not quite easy to provide for a two-meter part.

On the silicone and acrylic glue to install the frieze quickly and comfortably. Manufacturers pack them in pistol tubes. The agent is applied with ease, and the diameter of the outlet at the tip is controlled by its consumption.

The procedure for gluing a baguette with silicone and acrylic compounds is usually described in the instructions for the material. The negative side such funds can be called their high price.

The most budgetary way of gluing baguettes on your own is the traditional finishing putty or composition for drywall if used in decoration. Such a mixture is reliable, it takes less time to solidify, so that after half an hour you can already paint the ceiling and baguettes.

However, there are also disadvantages of using putty as an adhesive:

• inconvenience of applying a thin layer of the mixture with a spatula on the molding;
• at the end of gluing, excess putty or drywall glue will need to be thoroughly removed with a moistened brush. Otherwise, pieces of visible dry mix will spoil the picture.

How to glue baguettes on the ceiling

There are two options for attaching the ceiling plinth:

• on the surface of the wallpaper;
• before gluing wallpaper.

Generally the baguettes are clean white, in view of this, in order not to contaminate the products, before starting work, you must thoroughly wash your hands with soap.

Advice! To start mounting baguettes, you can choose any corner of the room.

You should know some of the features of work on the sticker of ceiling plinths:

1. Much attention should be paid to cleaning the walls and ceiling from traces of adhesive. Acrylic and silicone based products can be removed with rubber spatula and a damp cloth. It is recommended to remove excess putty with a small wet brush.
2. Filling all gaps around the molding with glue is required. Corner joints should also be processed. Do not rely on these gaps to mask when painting or wallpapering. This will not happen. And the glue that gets on the wall and ceiling should be carefully removed.
3. Often, when the glue hardens at the joints, the end of the baguette leaves, and a step is obtained. To protect against this effect, two adjacent ends must be fixed in the required position with sewing needles or pins. When the glue hardens, the needles must be removed and the holes are covered with an adhesive mixture.
4. Several layers of paint are applied to the baguettes. First, priming is performed to mask the filled joints. Then layers that play a decorative role are applied, and the ceiling is painted at the same time.
5. Excess glue along the skirting board should be cut off with a sharp trowel.

Baguette sticker on wallpaper

The main advantage of this method is that there is no need to adjust the wallpaper to the baguette. The frieze will cover all errors along the upper edge of the finish.

Procedure:

1. Trim the ends using a miter box.
2. Apply a thin layer of glue to the glued surfaces of the skirting board.
3. Attach the plank to the wall and hold, according to the sticky note.
4. Remove excess material with a sponge or cloth.
5. Seal joint gaps with white sealant.
6. To paint the baguette, use acrylic or water-emulsion paint.

Advice! In order not to stain the wallpaper when coloring the skirting board, lay masking tape along the baguette, and after the paint dries, remove the protection.

How to fix a baguette before wallpapering

This professional method which is executed in the following order:

1. Prepare the walls and ceiling. Get rid of roughness, unevenness with a sandpaper, remove construction dust from the surface, then cover with a primer mixture.
2. Trim the ends of the skirting board using a miter box.
3. Fasten the baguette with putty or drywall glue.
4. Fill all gaps with filler, remove excess with a clean cloth.
5. Wait until the putty hardens.
6. Prime surfaces.
7. To paint the ceiling and baguettes.
8. Glue the wallpaper. Cut the upper overlap on the plinth evenly with a sharp knife, attaching a wide spatula.

The advantage of this method is the ease of correcting adhesive defects and the ability to paint the baguette installed in place without fear of staining the wallpaper.

Features of mounting a baguette in the corners

It is necessary to adjust the last plank with a cut corner to prevent damage to the material when an error with an angle is detected.

If the room has even corners (90 degrees), then the corners between the two walls and between the ceiling and the wall should be straight. In this case, it is possible to correctly cut the corners using the miter box.

First you need to trim the corner baguettes with a miter box. Then bring their ends to required sizes with a sharp knife. Spread the gaps evenly on both sections to prevent the step effect.

The procedure for using the joinery miter box:

1. If you have no experience with this kind of work, we recommend that you practice on small pieces of frieze.
2. Place the plank in the miter box as it will be on the ceiling.
3. Press the lower part of the frieze tightly against the sidewall of the miter box.

If there is no miter box, you can trim in this way:

1. Attach a frieze to the corner on the left side.
2. On the ceiling from the corner, draw a line (10-15 cm) along the plinth with a pencil.
3. Do the same on the right side of the corner.
4. Where the lines intersect is the starting point of the cut.
5. Mark the intersection of the segments on the left and right planks.
6. Cut straight from the mark to the opposite side of the left and right frieze with a construction blade at an angle of 45 degrees.
7. Check the correctness of the cut by attaching the processed friezes to the corner.

As you can see, there is nothing difficult in gluing baguettes. With our advice, you will succeed in getting the job done.

7299 0 0

Baguette for wallpaper: how to glue correctly

Have you decided to glue the baguette on the wallpaper, but don't know how to do it correctly? I will talk about how to do the installation with your own hands and what is required for this. In addition, you will learn about the pros and cons of gluing a baguette over wallpaper.

The pros and cons of wallpaper baguettes

Arguments for:

• The baguette provides additional strength to the seams on the wallpaper... It would seem that at the abutment of the walls and ceiling, there is an additional load on the finishing. Nevertheless, if the installation is done properly, the glued baguette holds the joints of the wallpaper strips together at the very trouble spot- at the top, where the canvas begins to move away from the base over time.

The arguments against:

• Wallpaper glue is not designed for additional stress... Baguettes are installed at the junction of the ceiling and walls, and it is at this point that the glue that holds the wallpaper dries out over time, and therefore the coating can move away from the base along with the baguette.
• The gaps between wallpaper and baguettes cannot be repaired... If the wall is not even enough, gaps will be visible between it and the even baguettes. At conventional installation, the gaps are filled with a sealant, which is then painted over. When mounted on wallpaper, the sealant will be visible.

So, is it possible to glue the baguette on the wall to the wallpaper? It is possible, but if you decide to install ceiling plinths over existing finishes, consider the following requirements:

• Choosing the right ceiling plinths and glue... Skirting boards too heavy and not strong enough adhesive composition will not ensure reliable connection with the wallpaper.
• Installation is carried out on non-textured wallpaper... Textured coatings have less adhesion to the adhesive compared to smooth surfaces. Therefore, installation on a coating without a pronounced relief will be of better quality and more reliable.
• Fill the gaps at the joints with sealant only if the finish is light... If there are gaps between the wall and the skirting board, they can be filled with sealant, which is usually white. On light-colored coatings, the white sealant will be less noticeable, while on dark wallpaper it will stand out a lot.

Baguettes - what they are and what to choose

Illustrations	Varieties by type of configuration
	Ceiling plinth... These are profiled strips that imitate stucco molding and are installed along the line of abutment of the ceiling and walls. On sale there are solid and backlight varieties. The main distinguishing characteristic of the skirting board is its width. As a rule, the larger the footage of the room, the wider the skirting board used.
	Molding (border). This is a profiled strip, as in the photo, which is installed as a border in the center of the wall. The molding can be used as an alternative to the skirting board.

Illustrations	Varieties by type of production material
	Polyurethane skirting board... Such products are elastic, and therefore they can be fastened not only along straight walls, but also along columns and other architectural structures with a complex configuration. The disadvantage of polyurethane baguettes is not only the high price, but also the greater weight. Therefore, for installation on wallpaper, this is not the best option.
	Styrofoam skirting board... The advantage of high density foam products is light weight and ease of machining. The disadvantage of foam plinths, in comparison with polyurethane counterparts, is rigidity and the impossibility of deformation. That is, it is preferable to glue foam baguettes around the perimeter of flat walls.
	Wooden plinth... Wooden baguettes are used extremely rarely, since the price of products is high. Such products can only be installed on perfectly flat walls.
	Wallpaper panels... These are not baguettes, but their paper imitation. The advantage of this finishing material- penny price and ease of gluing. The disadvantage of the solution is the budget unpresentable look.

What to choose from the listed options? Due to its light weight and ease of installation, the best choice- this is a baseboard made of polystyrene foam. By the way, as an alternative, you can use paper panels, with the installation of which there are no difficulties at all.

How to glue

Illustrations	Recommended glue for baguettes
	Assembly adhesive on acrylic base ... Such compositions on sale are represented by "Baguette glue", " Liquid nails" etc. Acrylic resin adhesive is non-corrosive polymer materials, and therefore suitable for the installation of any ceiling skirting boards and curbs. The disadvantage of acrylic compounds is that they are white, which means they will be noticeable on dark wallpapers.
	Cyanoacrylate glue... Such compositions include Akfix 750, Hencel Moment, Loctite 454, etc. A distinctive characteristic of cyanoacrylate adhesives is fast drying, which makes it easier to install the skirting board by weight. Like acrylic glue, cyanoacrylate compounds do not corrode polymer surfaces, and therefore can be used to install foam and polyurethane products.
	Styrofoam adhesive. Mounting means, such as "Titan" Wild are traditionally used for gluing foam curtain rods. After drying, the product forms a hard, colorless or transparent layer with excellent adhesive properties. Adhesive seizure when room temperature, on average, occurs in 20 seconds.

Gluing technology

Illustrations	Step by step instructions
	Trim skirting boards... Since the installation starts from the corner, you need to cut the corner abutment in advance, as shown in the diagram. For these purposes, we use a miter saw or a miter box with a hacksaw. The proposed scheme is relevant if the corners between the walls are straight. If there is curvature, the trim will have to be adjusted with a knife. The factory edge of the foam baguettes is always deformed, so be sure to cut the edges at right angles and only then adjust to the desired size.
	Installation. Glue is applied to the wrong side of the skirting board in accordance with the type of ceiling. If the ceiling is stretched, then glue is applied to the part that adjoins the wall, and if the ceiling is normal, then we coat both sides. We hold the prepared plinth strip for a minute, after which we put it in place. Having attached the bar, we gently press down on it along the entire length, but at the same time we try not to damage it.
	We seal the joints... To make the joints between the pieces of the plinth look solid, coat the ends of the sections with acrylic sealant and then connect with little effort. The connected joint is fastened with pins or toothpicks during the drying time of the sealant, which will not allow the seam to disperse.
	Removing excess glue... Using the corner of the trowel, we pass along the longitudinal edge of the glued plinth, removing the excess glue that has come out. If whitish marks remain on the wallpaper, before it's too late, they need to be erased with a clean foam sponge dipped in water.

Let's sum up

Now you know how and how to glue baguettes to wallpaper. You will find more interesting things on the topic by watching the video in this article. If you have any questions or have your own thoughts on working with baguettes, write about it in the comments.

July 5, 2017

If you want to express gratitude, add clarification or objection, ask the author something - add a comment or say thank you!