Ceiling painted with water-emulsion. Prayer Ceiling "Water-Eulsion": from preparation to the last layer

It happens that when painting the ceiling, an old paint coating is removed, but sometimes this stage is missing. If you do everything right, then with this situation the result will be surprisingly good. After reading the article, you will learn how to stain in the old paint.

Features of the process

Painting the ceiling is not so difficult, as it seems at first glance. As a rule, before this process, workers are written to an old layer of finishing. The fact is that a thick layer of old paint can shine and spoil the appearance of the surface. If cracks appeared on the ceiling, then the case is completely hopeless - as they do not exact them, they will still be visible. If the repair has not been done for a long time, then under the layer of old paint you can detect the mold, which will reduce all your attempts to update the surface.

If there are no such serious problems, then you can safely apply a new layer of water-emulsionics on the old paint, acrylic. Carefully inspect your ceiling. If his appearance suits you, and no paint pieces fall off, you can leave everything as it is.

Professionals advise to pay attention also to the following: if you used to paint the ceiling with water-emulsion paint, then you are lucky. She is better than blissing. Even if the paint of this type begins to flap and disappear by pieces, it can not be removed completely. You can safely limit the surface cleaning by removing peeling pieces and shining the territory around them. After this short job, you can safely apply a new layer of paint.

Selecting paint

If you decide to cover the ceiling of paint on top of the old layer of material, you will have to face a question related to the choice of a suitable option. For such work, different paints are used. Each type has its own advantages, and a number of flaws.

Acrylic

Perhaps this type of paint enjoys the greatest popularity. It is good because it is characterized by increased resistance to all sorts of pollution and quickly dries. So you can safely use this material, for example, in the kitchen, where work with food does not always go carefully.

Such paint is well withstanding and increased humidity.If any contamination is on the painted surface, it can be calmly removed with a damp cloth or a napkin, without fear that the paint cracks.

Acrylic paint can be calmly applied to a variety of surfaces. It lies well on metal, and on wood, and on plastic, and even already posted bases.

Painting acrylic is good and the fact that it perfectly hides the small shortcomings of the surface. The texture paint is able to disguise small cracks or places where the coverage pieces have already fallen off.

It is pleasant to the fact that such a coating quickly dries and saves its color for a long time. Even if you paint the ceiling in the room, where the sun rays will constantly fall on it, the paint will hang out and will not be unattached immediately. However, there is one nuance: choosing this type of paint, remember that the color of the coating applied to the ceiling will be slightly different from the one you see on the package, because the material immediately darkens. This can not be called such a big drawback, because there are a lot of colors, and you can always find exactly the shade, which in the end will arrange you.

With all these positive moments it is worth noting that the paint is not so expensive. You can purchase a kilogram of paint at a price of about a thousand rubles. Yes, and it will be consumed quite slowly - you will need less packaging of the material in the middle room. About 100 g of paint is consumed per square meter.

Latex

There are several other types of paints that are suitable for the ceiling. The most expensive options are latex. Such paint is perfect for painting the ceiling over the old layer. The fact is that it perfectly masks defects, microcracks on any surfaces. You can safely wash the ceiling by this material or wipe the brush.

Silicant

Cracks (up to two millimeters) can mask and silicate paint. However, it is more expensive than most analogues.

In addition, it is important to remember that silicate paints are usually not used in residential premises.

Water-emulsion

Waterproof paint also paint ceilings often. However, it is worth using it in dry rooms - for example, in living rooms or bedrooms. The coating of this type is poorly tolerates increased humidity and quickly covered with cracks, dark stains (in the bathroom or even in the kitchen). The cost of water-dispersion paint is low, which just makes it popular. In addition, it can be matte, and glossy, which is convenient for those who make their premises in a certain style and does not want to break the harmony in the room.

From these basic types of paint to repaint the ceiling you can choose any. It can be a dense and structural, oil, very easy - it all depends on what your ceiling, what are your financial opportunities.

Instruments

The next step is the choice of suitable tools. Most often, either roller or wide brushes are used for painting the ceiling.

Tassels

Brushes of different sizes can be used both for staining the base and for joints, finishing elements. When staining the main part of the ceiling, they are not very effective.

If you decide to paint such a large surface of your brushes, then choose the wider. The places of joints with walls, stucco and other decorative details are just more convenient to cry with tassels.

Roller

Much more convenient to paint the ceiling with roller. For staining the ceiling use foambone tools. The second most popular option is a roller with a fabric basis. The length of this tool for staining the ceiling may vary from five to thirty centimeters.

Kraspopult

Extraly use the paintopult. However, this option is preferred not all. The fact is that the paintopult is not only more expensive than all other devices, but also more difficult to use them. If you are not a professional, then you will need to adapt to the crashpool.

How to dilute and calculate the quantity?

Deciding with the type of paint and tools, you can move to the preparatory work. First you need to make the required amount of material.

Paint consumption depends on how big you have a roomThe ceiling area is very important. As a rule, all the necessary information that will help you make the calculation of paint, is on the package. Check out this information.

Having chosen the water-making paint, you will see on the package that it is not worth diluting it. If the product you purchased has already managed to thicken, then you can slightly dilute it with water. Otherwise, simply mix the paint, roll it on the roller over the pallet and start painting.

Not much different and the preparation of other ceiling colors. The acrylic mixture will also need to add some water. It is best to use the product immediately after you stirred it. Do not give it to stick.

Subtlety application

The coloring of the ceiling without preliminary removal of the old layer of paint is slightly different from the usual repair work. You will save a little time, because you do not have to completely remove the old layer and put off or grind the ceiling again. It will be enough to work out zones with cracks and remove the falling pieces of paintwork. If the paint is peeled, it will need to be corrected, otherwise the surface of the ceiling will seem uneven and neakkurat.

When you cope with the most noticeable shortcomings, you will need to move to the main works.Divorced paint should be pouring into the tray - it should be not too much so that the remnants then do not dry or were not thrown out.

Staining the ceiling begins with the most hard-to-reach places. Come on with a narrow tassel so that no spaces remain. After that, you can paint the entire surface. Work is the most convenient roller. So you can quickly scroll the ceiling over the old layer and paint cracks, divorces.

Collect the ceiling is thus recommended in several stages. The first layer can not be applied very carefully, but over the second you will need to work very well. It is only possible to start working with the second layer after the first will dry.

How to paint the ceiling with water-level paint? The abundance of various ways to finish does not exclude the popularity of the painting of the ceiling and today. Such a coating attracts accessibility and the ability to fulfill all the work with your own hands. However, not everyone knows how to properly paint the ceiling of the water-emulsion.

The article tells about the nuances in preparing the basis for paint, about the technology of coloring the ceiling by water-emulsion paint with their own hands.

What compilations are used for the painting of the ceiling

In the former times, the most popular coatings for the ceilings were solutions from chalk and lime. The only advantage of such coatings is low cost.

Now such works are performed by water-mounted paints:

• The most popular of this type of coatings - acrylic paints. Their features:
  1. sufficiently good properties during operation;
  2. the use of different compositions depending on the type of premises where the repair is required.

  Compared to other similar cost, the cost is slightly higher.

  For staining the ceiling will be needed:

  • Kraspopult (see Types of Crosspools: how to choose correctly). The use of such a device is the most convenient, fairly fast and high-quality method of coating. But such a device is worth quite serious money, which is often inaccessible to the usual lover to do repairs independently. In this case, it is worth using cheaper tools that are shown in the photo.

  

  • Malyary Valik - This is the main tool when finishing the ceiling.

Previously, the ceilings were most often rubbed by whitewash, but now such a kind of priority. Therefore, now everyone overlaps whiten by other materials. In the event that you have gathered to paint, is it possible to paint the ceiling after whitewash? We will deal with this in the article below.

Water-emulsion paint differs significantly from other species. It will dry much faster. You need only two hours in the most quick paint. Water-emulsion will not harm health, there are no toxic substances in its composition. You can work without a mask, there is no need to close the room until complete drying. Due to the absence of harmful substances in paint there is no smell.

After it, you do not need to air the room.

• The choice of colors is not limited. With the help of a kole, you can independently make the shade you need. Paint is sold mainly in white.
• The paint is easy to apply, it can do anyone alone. The water exchange will serve you 15 years without squeezing. It costs it inexpensively.
• There are disadvantages of water-emulsion. Temperature during operation should not be below 5 degrees. Painting is possible only in the warm season or in a heated room.
• The paint does not like direct mechanical impacts, over time it wipes, and it will wash off from frequent cleaning. She does not like water very much.

Types of waterfront paint

The water disposal is divided into 4 species in composition: acrylic, silicone, silicate, mineral. Some will cost more expensive, others cheaper. Consider them in more detail.

Acrylic paint. It is used most often, but it costs it therefore not cheap. It has the highest quality set of characteristics. Suitable for painting inside and outside. Due to the content of acrylic, the paint has waterproof parameters.

It can be washed without the risk of erasing, use in rooms with high humidity. It is easier to apply it, it does not absorb the surface. If the paint contains latex, then it can close small cracks. Acrylic paint is not exposed to burnout: the sun is not scary. At the same time it is safe, does not make unpleasant odors: you can paint a nursery or kitchen.

Silicone. Paint is suitable for rooms with high humidity. Suitable more than acrylic. The structure of the silicone is much more elastic latex, and it means that it can hide bigger cracks. Paint misses couples, which will save you from the appearance of mold and fungus. You can additionally do not impregnate with anti-grab compositions. Well suitable for bath or kitchen. Pumps up dirt - you do not have to clean the surface often.

Silicate. Ideal for finishing the house outside. For decoration indoors it is not suitable. You can use for outdoor work or in extensions without heating. Long service life and resistance to any atmospheric phenomena make it better among the paints for the exterior decoration.

How to paint the ceiling of water-mounted paint

It is not recommended to apply paint on the whitewash. Previously need to be removed. Painting on bliss is possible only in the case of its perfect state: if it does not lish and does not crack. Try to spend your pure roller. If the whots did not remain on the roller and did not begin to fall, then you can paint right on it.

If the whitewashed swollen, crackled, it is impossible to put paint on the whitewash. And it will not start turning right in the process of work. The paint will be lying unevenly, and your ceiling will be hopelessly spoiled.

If you are planning to put paint on the palate layer, then all you need is to simply predict the surface of the ceiling. After that, once again, try to disturb the surface, and if there are no ships, then for work.

Preparation of the ceiling

The first thing is necessary when working with paint - make all the furniture. Of course, you can cover it and cover it, but there is no guarantee that there are no holes in it or it does not break. It is better to make it all. When working, use gloves and mask. Lime is not good for health.

Wheels easier to remove in wet state. Use a warm soap solution. Apply it all over the ceiling perimeter. As dirty change water. Carefully process the entire ceiling.

If you have a thin layer of whitewash, then in a working form you can remove the usual roller. Also wet it periodically with water. Instead of a roller, you can use the brush. For convenience, you can use a pulverizer and wet the ceiling to them, and remove the coating with a sponge.

If this way is not cleaned, it will have to work a spatula. Squares them whitening from the ceiling.

Another way to remove - with the help of alee. It is simply glued to the whitewash and after drying it is converted into a film that is easier to shake. Cleaster can be made independently. To boiled water, add flour or starch. Gradually stirring, prevent the formation of lumps. Cool the mixture slightly and apply a roller or brush to the ceiling, distributing evenly. Then wait until the mass is dry and forms crust. It is removed by a spatula.

If it did not help, it is possible to remove the whitewash only with a grinding machine. Peeling will be enough, so close the door and put on the protective suit. Then you need to thoroughly wash the entire room. Preferably several times with special means.

And the most radical method of deliverance - removal with acid. You need to work with full protection: glasses, mask, gloves and suit. Acetic acid with small portions add to water. No more than 3% acid should be on the volume of water. The order of this is: water, then small portions of acid, otherwise it will come into the reaction. Brush apply a solution on the ceiling and then remove the coating with a spatula or brush. The surface of the ceiling is necessarily washed with soap solution.

After removing the whirlwind, overlook all the cracks and holes. Sprouter surface. Select the primer at that paint that you will apply. Preferably from one manufacturer.

Painting ceiling

Before applying, you need to add a keler. The main difficulty is to dilute as much as you need to cover, otherwise it will be very difficult to get exactly the same color.

Pour a little paint into a measuring container. Enter the kel through the syringe. It is important to use measuring tanks, since it is precisely for these measurements to navigate when adding a kole to the main container. Remember the results obtained and calculate how much the flaper is needed for the volume of your bucket with paint. After you mix them, try to smear a little on a small area, and look at this color that you need.

In the instructions for paint, it is painted in detail, as in what quantities it is to breed. The paint is stirred before applying and added water. The composition is mixed and poured into a painting bath. Periodically dip in the bath periodically, and wipe the surplus. So fidgeting the entire ceiling. If your coverage has absorbed a lot of paint, apply the second layer.

The problem of how to paint the ceiling of the water-mounted paint, called in use by water-emulsion, remains relevant and now, despite the emergence of many newer and modern finishing materials.

Water-emulsion - what is it happening?

A lot of decades in a row, the waterfront paint was the most demanded option for finishing the ceiling surfaces. Everyone liked her versatility and high ecology, as well as the possibility of choosing the desired shade to arrange interior.

The ceilings painted with water-free, long time retain their aesthetic look, and care for them is most simple as possible. At the same time, the cost of such paint is low, which reduces the cost of repair work.

The water disposal is a suspension consisting of pigment elements and particles of polymers, which dissolve in certain proportions with prepared water. After such a composition is applied to the stained surface, the active evaporation of the liquid contained in the paint begins. In this case, polymer particles are securely fasten with the ceiling and form a high-resistant coating to high humidity.

To achieve the highest possible result of the color of the ceiling with your own hands, it is necessary to properly choose the water-emulsion composition. Such paints include a variety of additives that are able to drastically change the properties of water-emulsion. For ceilings, the following types of water makeup can be used:

• Polyvinila acetate. The cheapest paints. The surfaces treated with them are forbidden to wash. It is allowed to apply exclusively in dry rooms. In the kitchen or in the bathroom it is impossible to use.
• Acrylic. This is perhaps the most popular view of the water-emulsion paint, which perfectly protects the ceiling from moisture. Acrylic compositions are used in any premises. The ceilings painted by them can be washed many times and carefully.
• Latex. Paints capable of aligning ceiling surfaces. The lack of such compositions is only one - they are expensive.

For staining ceiling surfaces, experts advise you to choose semi-wave and semi-unified water-emulsion. The first is able to "disguise" minor flaws of ceilings, and the second does not hide the existing defects, but they are easy for them to care.

How to prepare a ceiling to staining with water-emulsion?

Without preliminary preparation, it is impossible to paint the surface with the water-emulsion composition. Be sure to remove the old paint or blotch from the ceiling. Lime and chalk plays are removed by a painting roller, which is wetted with water, and a metal spatula (they scrape the coating "appeared"). After such processing the ceiling it will need to be thoroughly washed with a sponge.

It is more difficult to remove the old water emulsion with your own hands. As it was said, the water-level paint is very tightly connected with the ceiling. Therefore, remove it, wetting the roller, is unreal. We will have to work in the sweat of the face to remove the detached areas of the old coating from the surface. This procedure is best done by a paint spatula.

It is possible to simplify the process as follows:

• double be rich in the old water coating (foam roller or from the sprayer);
• create in the area of \u200b\u200bdrafts;
• remove swollen slices of old paint.

Use the described reception to significantly facilitate the operation of removing the old coating with your own hands.

After cleaning the ceiling it is required to align. Usually, a thin layer plastic putty applies for these purposes. It grips perfectly with the ceiling surface and makes it truly even. You can additionally with the help of "sandwich" with small grain to polish the wrapal layer.

It is also performed by another way, with the help of oil special spacing. It is needed by a brush or a roller distribute (as evenly possible) on the surface on which all the available gaps and cracks are pre-close. Then it will be properly a thin layer to progress the ceiling of the water-level paint that you plan to apply.

Now the surface is completely ready and we describe in detail how to paint the ceiling with water-emulsion paint.

The use of water-based paint requires knowledge of the rules of its application. If they are not studied, you will receive a ceiling with bright dark and light spots as a result of painting work, strips from the passage of roller or brushes, striking irregularities of painting. To avoid this will help you with the following recommendations.

Always start painting from the joints and corners between the ceiling and wall surfaces. The very first to handle the angle that is at maximum distance from the entrance to the room. The color of these problem areas is made by a painting wide brush. It must be half moisten in the water-free and slightly squeeze, make a 3-5 centimeter passage throughout the perimeter of the room. Thanks to this technique, when you use a roller for coloring, the angles and compounds of walls with the ceiling will be obtained similar to the shade and uniformity of application with the rest of the surface.

The main work on painting the ceiling by water-free roller is made. With it, you need to perform three passages. The first passage of the water-emulsion system is carried out in parallel with the solar rays falling into the room through the window, the second is perpendicular to the window, the third is in the direction of the window opening.

After each staining should be waited at least 8 hours (optimal - 12) and only then apply the following layer of paint.

Follow these advice, and you will absolutely get to paint the ceiling with your own hands and without difficulty. The technique of painting the surface of the surface by water-emulsion is quite simple:

1. You dial into wide capacity (for example, in a small bath) paint.
2. Welcome in a water-free roller and distribute composition evenly on it (just a couple of times spend on any rough surface with a painting tool).
3. Make the first pass (roller lead from left to right) from the far from the corner in the room, then go through again, but now right left.
4. Excess water emulsion removes dry roller from the ceiling - spend it along the painted surface and it collects all unnecessary paint.

Note! Last staining is recommended to make a new roller. Then the ceiling will truly evenly and without the slightest flaws are painted.

During the drying of the surface, painted by water-emulsion, it is required to protect the room from penetrating the rays of the sun and drafts into it. Do not use heaters and other electrical appliances for drying the applied paint.

Finishing the ceiling, including its painting, is hardly the most time-consuming part of the repair. Modern technologies greatly facilitate this process. Recently, recently popular paints - high-quality materials, easy to use. But the painting of the ceiling by water-free also has its secrets and features that need to be considered when working.

Required tools and materials

First of all, you need to choose the right paint. In its composition, the water emulsion is:

• acrylic;
• silicone;
• silicate;
• latex.

But even the composition is not the most important thing that you need to pay attention. A more important indicator is the shelterness of paint. You can find out very simple: the more the number of square meters, on which 1 liter of paint is enough, the better.

Wide color palette - far from the only plus of water-emulsion paints

If you are going to handle ceilings in rooms with high humidity (for example, in the kitchen or in the bathroom), buy water-free paint for wet rooms. Do not forget about the presence of anti-flap components in its composition. In addition, paint for such premises should be washed. In dry rooms you can apply a conventional water-emulsion.

Attentive reading the label on the bank will help you when choosing. Certain inscriptions need explanation.

1. "The paint has a high resistance to dry abrasion" - the painted surface cannot be exposed to moisture. Cleaning only with a vacuum cleaner or a dry cloth.
2. "The paint can be used in dry rooms with a reduced operational load" - for painting the ceiling in the kitchen and bathroom, where high humidity and a large amount of fat evaporation, such a tool is not suitable.
3. "Insome paint, with high resistance to abrasion" - ceilings, painted with such paint, can be easily and painlessly undergo wet cleaning without the use of special detergents.
4. "The paint has high abrasion resistance with intensive washing and dirt-repellent properties" - the best coating for the ceiling. You can easily wash the surface even with the use of detergents.

The choice between glossy and matte water-based paint depends only on your taste. But note that the matte coating will visually increase the height of the room, making small defects, but it will be bad to be washed. Glossy paint looks more spectacular, it is easier to wash and does not grind a long time, while maintaining its qualitative characteristics. But it will easily reveal all the small flaws on the ceiling. It is believed that the best choice is a half-one or semi-chair paint.

Note! If you buy several cans of waterfront paint, require all of them from one party. Otherwise, paint can be different shades. It is also important that in the store selling such paint, there was a warmed warehouse: low temperatures lead to a violation of the structure of water-emulsion and loss of its quality.

Also be sure to purchase primer - it is necessary to use it with painting works. If you need to repair the ceiling, then buy a solution for washing off the old paint and putty.

Bank of waterproof paint, brush, roller and bath - everything you need to work

Now let's get to the necessary tools to work. You will need:

• putty knife;
• painting bath;
• roller about 20 cm wide with an average pile (velor and foam coats are not suitable categorically);
• sandpaper with shallow grain;
• thin bruster width 5-8 cm for procession of corners and edges.

Surely you noticed a remark about the roller with a pile. The fact is that the foam roller will leave bubbles on the surface, and the velor absorbs insufficiently paint, and you will have to very often dip the tool in the bath. Consider this when you buy.

Telescopic roller handle helps you do without a stepladder

If for some reason you do not want or can not use the stepladder when painting the ceiling, the telescopic handle for roller will help you.

Preliminary preparation and processing of the ceiling

Before proceeding with painting with water-emulsion, the ceiling must be prepared for subsequent work.

To get a positive result of work, do not paint the ceiling with a water-emulsion over the old layer. It must be removed by the spatula, applying an alkaline detergent, and then rinse the ceiling with clean water and give dry.

To simplify the task, use this simple admission:

1. Moisten the ceiling with plenty of water (for this you can use the spacing or foam roller).
2. After half an hour, repeat the procedure. The old coating is as impregnated with moisture.
3. The next step is to create in the area of \u200b\u200bdrafts. Open all windows and doors, and swollen is formed on the surface of the ceiling. Such a spacious layer of old coating you can easily remove the spatula.

After such a pretreatment on the surface of the ceiling can be noticeable errors. They are easy enough to eliminate: open all the slots and process them with the finish shtakula. After her drying, the surface needs to be lined with sandpaper, and the dust erase with a damp cloth or remove the vacuum cleaner.

During the preparation of the ceiling to paint, it may be necessary to eliminate small errors.

Now proceed to the primer ceiling. Use for this primer deep penetration. When it dries, paint can be applied to the surface.

Too uneven surface with potholes and multi-level interchangeal joints indicates the need for overhaul.

The process of painting the ceiling of water-level paint

It is good that progress does not stand still, and not only a few ways can be applied to perform the same work, but also various auxiliary devices. For example, paint the ceiling by water-emulsion can be manually or using collapse.

Painting roller

1. Carefully remove the cover with the cans and stirred the contents carefully. In some cases, the water-free paint needs to be diluted to the desired thickness with water (information about this is usually contained in the instructions). Usually there is no more than 10% of water from the total paint volume.

   Open the jar, mix the paint and, if necessary, dilute it with water

2. First of all, paint the corners and edges of the ceiling along the walls. This will help you not to stain the walls upon subsequent work.

   To begin with, fidgeting the corners and edges with the help of a brush

3. Small paint pour into a paint bath. Pulk it in it and ride the corrugated surface so that the paint is evenly distributed, and its surplus retired.

   Type paint on the roller and wash the surplus about the bath

4. Start painting from the window across the direction of the sun's rays, gradually moving deep into the room.
5. When the first layer of paint dries, you need to apply the second. This should also be done from the window, but already along the direction of the rays of the sun. So you will eliminate all non-prisoners who escaped from your view, but over time it would have been found.

   This scheme will tell you how to properly apply paint layers on the ceiling.

6. Little tubercles and bubbles detected after drying the surface, carefully remove fine-grained sandpaper.

   In the process of small flaws, you can lure sandpaper and paint with brush if necessary

The whole process, taking into account the drying of the layer, can take you several days. It is recommended to carry painting work in the morning and early in the evening: during this period, the sun's rays fall on the surface optimally, it will help you correctly appreciate how much paint lay down exactly.

Video about the correct painting of the ceiling by water-free with a roller

Application of kraskopulture

Such work will bring you pleasure: it is fast and easy compared to the use of roller. The most important thing in the process is to achieve a subtle, maximum uniform layer.

1. Before starting the painting of the ceiling, remove the nozzle of the device away from the surface of the surface, because in the first seconds, the paint populates many paints.

Before starting work, "Help" a small amount of paint from the device

2. When the spray is uniform, proceed to staining the ceiling. Separate the paintopult from the surface of the ceiling should distance from 30 to 50 cm. Move the nozzle at a speed of about 5 seconds by 1 mongor meter. In this case, the shape direction strictly perpendicular to the painted surface of the ceiling.

Hold the paintopult at the required distance from the surface

3. To simplify the process, divide the surface mentally into squares. Kraste them in turn, first moves across, then - along. At the same time, do not delay for a long time on one site, otherwise the layer will turn out to be thick, and the paint will flock down. Stick at a smooth pace, spending staining.

It is necessary to operate the spray in the already known scheme: one layer - across the direction of light, the second - along

How to paint the ceiling with a kraskopulture - video

Secrets and features of the work: how to prevent errors and correct the flaws on the go

If in the process of staining you have broken the technology and caused a water-level paint uneven, places with different shades may form (the light is reflected in varying degrees of intensity) to avoid this, observe the direction of staining.

Do not try to correct such inhomogeneities until the surface dried - it will aggravate the problem. Wait for complete drying and apply another layer, which will hide disadvantages. If it did not help, remove the sandpaper of the sandpaper and apply again.

Staining the ceiling of plasterboard, do not use the paint too strongly diluted with water. It can twist the paper layer of the finishing material so much that the surface is covered with bubbles and starts to get out. And since the ceiling is you not the walls, then the heartless gravity will make his job until the top is overhauled. We do not pursue such purposes, right?

The plastered ceiling is better in painting with a spray with a collapse. This device will dispense the paint on the ceiling much evenly than the roller. But do not forget to pre-apply primer.

If the ceiling was previously whiten, the old layer is better washed. The water-making paint applied to the excretion or bliss does not only fall unevenly, but also starts to get out. The same applies to the old paint: if light damage appeared on it, remove the layer.

Small errors and babysitting in painting Ceiling You can easily fix with roller and brushes

So that during the coloring, there were no divorces on the ceiling, first apply a wide roller layer of diluted water-level paint. After drying, you can easily consider all flaws. When you spend the main color, pay special attention to these areas and carefully process them.

Be sure to follow the direction of the layer: the penultimate layer must be perpendicular to the window, and the last - parallel. Do not hurry - wait until the layers are completely dried.

Excess paint applied can be removed in the following way: pass the roller on which the paint remains, on the surface, and its pile will absorb everything too much.

Errors when working as paint

If you do not quickly move quickly with a sprouting nozzle, the water maker on the ceiling will gather in small drops. Collect excess with a sponge, and, waiting for drying, apply another layer of paint.

Too thick layer will lead to paint solutions. The places where the detachals appeared, prcription, set the emery and properly, and after drying, it is re-painted. It is advisable to apply another layer of paint.

In some shortcomings in painting, an additional shtclotter and primer will need to be needed

After painting on the ceiling there were small tubercles and grains? Surely the paint used was originally dirty. To get rid of such a marriage, go through the entire surface of the ceiling by sandpaper and paint again, only the paint is preheated through the gauze.

As you can see, it is enough to follow the recommendations and simple rules to paint the ceiling of the water-level paint for you too problematic and time consuming. And the roller, and the paintopult are excellent helpers in this matter, and our advice will certainly facilitate the task. Share with us in comments by your experience painting the ceiling with water-level paint or ask questions on the topic. Good luck to you and comfort your home!