Metal siding installation on a wooden house. House cladding with metal siding

If you decide to upgrade appearance your home quickly, efficiently and for a long time, then you will surely opt for the now popular material - siding. It has many advantages, but the main ones can be called quick installation, durability and low maintenance.

In addition, with it you can insulate the house, and you will not need to paint it every couple of years, unlike other materials. Today we will tell you, the facade of the house from metal siding.

Differences of metal siding

Siding panels have several types:

• metal;
• Vinyl;
• Cement;
• Wooden;
• Socle.

In turn, metal siding can be made of aluminum or steel, with a width of 100 to 300 mm.

It is a profiled panel with a painted or polymer coating.

• Polymer panels are more practical, but they have little choice flowers, and the price for them is more expensive.
• The surface is coated with anti-corrosion varnish, which increases its wear resistance.
• The texture of the material can be smooth or embossed.
• The service life of metal siding is more than 50 years, which can be compared with cement siding. Other types are less durable: wood will last you about 15 years, vinyl - from 20 to 50.
• Unlike wood, metal does not burn or rot, and is highly resistant to acids and alkalis.
• The sun's rays will not spoil the walls after a few years, the shape will remain the same, and the color will not fade and will be just as bright.
• Metal panels are much stronger than vinyl panels.

That is why metal siding cladding is popular on facades with high requirements and load: shops, shopping centers, gas stations, factories.

However, this material also has its drawbacks: dents remain on it and it is easy to damage it during installation - a thin layer of paint disappears and corrosion begins.

Material calculation

Before proceeding with the purchase of material, you need to determine its quantity. In order to correctly calculate the required amount of siding, draw up a sketch of your house while maintaining proportions. Then divide the surface of the walls into geometric shapes.

The calculation instruction will look something like this:

1. Separately calculate the area of ​​\u200b\u200bwalls, windows and doors;
2. From the total value, subtract the area of ​​\u200b\u200bopenings that do not need to be sheathed;
3. To calculate the components, calculate the total perimeter of the house;
4. Calculate the length of the cornices, gables;
5. Add the length of all corners, separately for internal and external;
6. Calculate the perimeter of window and door openings.

In accordance with your calculations, purchase the siding and accessories for its fastening, which are shown in the photo. Also do not forget to buy drainage for window sills and cornices.

Advice!
When buying material, take it with a margin so as not to use small scraps and not to buy more later. Please note that the shades of siding and fasteners in different batches may vary slightly.

Preparatory work

First of all, it is necessary to free the facade from unnecessary details. Remove all antennas, gutters, architraves and window sills.

Carefully inspect the surface of the facade for crumbling plaster and cracks, to do this, tap it. Cracks must be sealed with cement mortar.

If the facade of the house is made of wood, replace the bad boards and nail them. To stop the decay of the tree in the future, treat the facade with a primer with an antiseptic.

Required Tools

Without this set of tools, fixing metal siding to the facade with your own hands will be a problem, so if you don’t have much of this, it may be a profitable solution to hire workers.

• For cutting profiles, strips, you need a grinder, a circular saw or metal shears.
• For measuring work, you must have a level, plumb line, square and tape measure.
• When creating a frame, you will need a puncher or a drill and a hammer.

• To work at height you need scaffolding. You can make your own or rent them.
• It is also necessary to ensure the safety of the work, so wear safety glasses and gloves.

crate

It is important to install the frame as accurately as possible, since the subsequent evenness of the walls directly depends on this stage.

• Mark the walls with a long level. The distance between the cells of the frame should be 60-100 centimeters.
  Please note that it is necessary to leave a technological gap for ventilation of the facade between the insulation and the cladding. It should be 4-10 centimeters wide.
• For fastening metal siding, it is recommended to use galvanized profiles, since the tree can withstand less stress and quickly becomes unusable.
• Secure them with leveling brackets and self-tapping screws to the wall. It is also necessary to fix them around the perimeter of the door and window openings and at the panel joints.

Note!
If the length of 1 profile is not enough, the vertical guides should not be joined together.
There should be a technological gap of 10 mm between them. For rigidity, you can connect vertical profiles with horizontal jumpers.
Their fastening occurs with an overlap, for which the side walls on the jumpers are cut off.

Working with insulation

House cladding metal siding often accompanied by building insulation. External insulation walls most profitable solution, as it allows you to significantly reduce the thickness of the bearing walls, and does not steal the area inside the house.

To do this, the insulation layer is tightly attached to the facade using dish-shaped dowels (umbrellas). For each square meter you need to hammer in at least 5 dowels, and at the corners - 12 pieces.

It is recommended to use insulation for siding with a density of at least 80-100 kg per cubic meter. Its thickness is determined by calculation, but if it exceeds 15 cm, then it must be applied in 2 layers. For the Moscow region, a heater thickness of 10 cm is usually used.

In order to protect the insulation from moisture and weathering, a windproof membrane is attached to it with a stapler.

Related articles:

Panel fixing

• After installing the insulation under the siding, we fasten the components, basement drains, because then it will be inconvenient to do this.
• The starting bar is installed from below in a horizontal position. Above is the final one.

• At the corners and at the joints, you need to install corner profiles and flashings that will hide the ends of the siding panels.
• It is highly desirable to protect the interior of the facade from rain and snow. To do this, a universal sealant is glued to the frame on the corners, around windows and doors, which is then pressed against the siding.
• If the house is lined with metal siding in a horizontal position, then the fastening starts from the bottom up from the corner of the house.
• The first panel is attached to the starting bar. Firmly insert the panel into the lath and fix the top edge with self-tapping screws to the crate. Fastening should take place in the center of the perforated holes. The edges must be inside the corner profiles or flashings.

Note!
So that after installation the siding panels do not rattle from the wind, you should not screw in the screws too much. Loosen them to provide room for thermal distortion.
It is also important to keep ventilation gap 5-10 mm between panel edges and vertical elements. Starting and finishing strips should not be fastened closely, but with a gap of 5 mm to each other.

• All subsequent panels are mounted in the same way on top of each other and fixed from above.

• For window framing, a sloping bar, aquilon and platband are used. A window drain is installed on the window sill.
  When mounting the edging, you must first install the parts from the bottom, and then the side ones.
• To fit the siding around the window, try on the panel and make marks, with a margin of 5-10 mm. Make vertical cuts on them. To mark the horizontal cut point, fasten a short piece of panel under the window, and make marks along the two edges, leaving 5 mm for the margin. Transfer the line to the full panel and cut it with metal shears.
• To pin last panel- cut it to the desired width and insert it inside. On the one hand, it will be held by siding, on the other, the final plank. You can also use a regular corner or top tide, fixing them with self-tapping screws from the visible side.

Vertical fastening siding

The vertical fastening of the panels occurs in exactly the same way, only in this case it is necessary to change the structure of the crate. Be sure to use horizontal and vertical guides. The distance between the horizontal profiles of the cell should be from 80 to 100 cm, and between the vertical ones - 100-150 cm.

As a start panel, a horizontally located corner bar or start is used.

It should be noted that with this method of fastening, the consumption of materials will increase, due to a more complex frame.

We invite you to look detailed video installation of metal siding on the facade:

Conclusion

In this article, we described in detail how to sheathe a house with metal siding. If you have already dealt with other types of this material, then you should be able to install it without any problems. The use of this material will allow you to transform the facade of any old house, make it warmer and hide flaws.

For cladding the facades of private houses and industrial facilities, special materials are produced that are wear-resistant and durable. One of the most popular and popular coatings is metal siding. Today we will take a closer look at this material, and also analyze in detail what pros and cons are inherent in it.

Peculiarities

Currently, the market for finishing materials is so rich that you can easily get lost in it. Each consumer is looking for the most reliable and durable cladding that will last for many years without causing problems. Modern metal siding meets these requirements.

This material is a galvanized sheet with a polymer coating. Metal siding can be painted in a variety of colors. Most often it is used in private construction, but it is also suitable for facing industrial buildings.

Today in stores you can find not only simple plain sheets of metal siding, but also more attractive specimens that imitate various surfaces. Currently, wood-like materials are rightfully recognized as the most popular. Buildings finished with such coatings look very beautiful and natural. From a distance it is difficult to understand that the house is lined with metal siding, not wood.

Metal siding is a fairly malleable material. With its installation, you can easily cope on your own, without involving specialists. You don't need expensive tools to do this.

This finishing material is perfect for exterior finish buildings, because he is not afraid of temperature changes and precipitation. Due to its wear resistance, metal siding has a long service life.

Today, such facing materials are produced by many large companies. Each consumer can choose suitable option the color you like. Metal siding is the best option in the price-quality ratio.

Advantages and disadvantages

Such a popular facade material as metal siding has its advantages and disadvantages.

To begin with, it is worth considering what are its advantages.

• First of all, it is worth highlighting the temperature resistance of metal siding. He is not afraid of temperature fluctuations. Even under conditions severe frosts such material does not deform and does not lose its shape.
• Metal siding is distinguished by good strength characteristics. This facing material quite hard to damage. Some manufacturers offer warranties of up to 50 years on their products.
• Such materials are installed quickly and easily. Installation is quite possible to do it yourself, saving money on a team of finishers.

• Metal siding is a wear-resistant material. He is not afraid of rain, snow, frost and mechanical external influences.
• This material does not need to be constantly looked after, spending a lot of money on special cleaning products. Any contamination is removed from the surface of metal siding very easily.
• Such cladding is easy to repair if necessary.
• Installation of metal siding can be done in any climatic zones of our country.
• Metal siding is not susceptible to the formation of moss, mold or fungus.
• Facades finished with metal siding are fireproof. This material is non-flammable and non-flammable.

• Metal siding is not subject to corrosion. In addition, the saturation of its color, as a rule, remains for many years and does not lose its original brightness. These characteristics are due to the multilayer nature of such materials.
• Metal siding is versatile in size. Also produced individual production similar coatings that are focused on specific parameters.
• Range colorful sheets siding is very diverse.
• Such facing materials are environmentally friendly. They do not contain harmful and dangerous compounds that adversely affect human health.
• Neither during installation, nor after it, metal siding exudes unpleasant odors.

Modern metal siding boasts many advantages. However, this material also has some disadvantages.

Let's consider them in more detail.

• Metal siding cannot boast of high mechanical strength. With a strong blow, it is sure to wrinkle and deform.
• If this material is received mechanical damage then repair it and return previous view is unlikely to succeed.
• Metal siding has a low coefficient of thermal insulation.
• Many consumers attribute metal siding to its impressive weight. According to home masters, because of this, it can be quite difficult to work with such material.
• Materials based on galvanized steel are expensive.

As you can see, the disadvantages of metal siding are much less than the advantages. The main thing is to choose a quality material that will not cause any inconvenience during installation and operation.

Specifications

Domestic and foreign manufacturers produce several varieties of metal siding. To date, the production of these facing materials is based not only on the use of high-quality and safe raw materials, but also on the use of high-tech equipment.

The technical characteristics of metal siding largely depend on the raw materials from which it is made.

• The minimum length of the metal sheet panel for finishing the facade of the building should not be less than 50 cm.
• The maximum length of this finishing material can reach 6 m.

• The width of the panel or sheet depends on the manufacturer that produced the material. As a rule, the factory width is about 22.5 cm. The mounting width does not exceed 22.8 cm.
• Most often, the height of the metal profile is about 1.4 cm. There are sheets with a height of 4 to 26 mm.
• The thickness of such facade panels is different. Most often, metal with a thickness of not more than 0.5 mm is used in production. Too thick raw material makes this material heavier, but does not affect its quality characteristics.
• The weight of metal siding directly depends on its dimensions. The average dimensions of the material assume the weight of one panel is about 5 kg.

Metal siding is durable material. Its service life can be from 25 to 50 years. It retains color saturation for 15–25 years.

Kinds

Modern manufacturers produce several varieties of metal siding. Let's consider them in more detail.

Perforated

basement

Such materials are rectangular panels that are joined together during installation. The most popular is dark basement siding under brick or stone. The main advantage of this facing material is its increased resistance to dampness and moisture.

facade

Facade metal siding is used when finishing surfaces located outside the building. Similar materials are produced in the most different colors solutions. Today, coatings imitating timber are very popular.

Installation facade siding must be made in accordance with the instructions so that the material is securely held on the bases.

Ceiling

CeilingSuch metal siding is used to finish the ceiling. Moreover, it can be in both open and closed structures.

Vertical

insulated

Insulated metal siding is produced in the form of a cassette, in which the inner and outer layers have metal bases with insulation between them.

Steel

Metal siding also differs in the type of material from which it is made. For example, steel coatings are in enviable demand because they are quite inexpensive, especially when compared with aluminum counterparts. However, it should be noted that the choice of colors for such coatings is small, as they are complemented by polymer coatings.

Much less often in the manufacture of steel parts, powder spraying is carried out. Thanks to this processing, siding can imitate various surfaces, such as wood or stone.

Steel coatings do not corrode, as they pass a special protective treatment at the production stage. Such materials can be called durable and reliable - it is quite difficult to damage them. It should be noted that the installation of steel structures is extremely simple.

Aluminum

This facing is in great demand among the owners of private houses. The material has excellent operational characteristics. It is not subject to corrosion and oxidation, so it can be considered universal.

Aluminum panels easily endure even the most severe climatic conditions. They are not afraid of temperature changes and precipitation. However, they also have their drawbacks. Such siding is not quite elastic - for a long time it restores its original shape after mechanical external influences.

eurobeam

Siding also differs in its design and appearance. For example, metal eurobar panels are in great demand, as they look presentable and expensive. The most popular are coatings that imitate "oak" and "golden oak".

As a rule, such steel panels are made with a thickness of 0.4-0.7 mm by stamping. They are galvanized, which makes them more durable and does not corrode. To give this material the look of natural wood, various polymer coatings such as polyurethane, pural or polyester.

With log imitation

Metal siding that imitates a log is no less popular. It looks very natural and natural, so it is chosen by many consumers. Most often, such material is used in private construction.

"Block house"

"Block House" is not just beautiful iron sheets, similar to wood paneling. Such materials are also made of galvanized steel, on which the corresponding pattern and texture is applied on top using photo printing. As a result, high-quality finishing coatings are obtained, which are outwardly difficult to distinguish from natural lining.

With imitation stone

This is another popular type of metal siding. Natural stone is an expensive and heavy material, the installation of which cannot be called simple, so most consumers prefer more affordable imitations of such coatings.

The most popular are sheets that repeat the structure of marble, granite and clinker bricks.

Dimensions

As a rule, metal siding is produced in the form of long panels with various dimensions. The length of such elements can be 3, 4, 5 m. The appropriate parameter should be chosen according to the size of the house that you plan to finish. In addition, such a finishing material must correspond to the geometry of the building. Experts recommend purchasing panels with a margin to avoid a large number of ugly joints.

The width of steel siding also varies. The standard indicators are 120, 300, 550 mm.

Currently, many manufacturers offer a service for the manufacture of metal siding according to individual orders. Thanks to this, you will be able to purchase material that is ideal for your home. Then the lining does not have to be adjusted to the desired parameters. In addition, many companies not only manufacture custom-sized siding, but also make all measurements of the bases in order to calculate the required volume of materials per m2.

Design

Metal siding is great for the exterior of your home. Buildings lined in this way look very aesthetically pleasing and neat.

The most popular are coatings that mimic:

• brick;
• stone;
• beam, log and wooden board.

For house cladding, both horizontal and vertical panels are used. Both finishes look attractive. In some cases, these materials are combined on the same plane. Thus, it is possible to arrange not only a private house but also a garage and other outbuildings.

Metal siding can not only have a surface that imitates various materials, but also be painted in different colors.

The most common are the panels of the following colors:

• yellow;
• cream;
• beige;
• burgundy;

• white;
• green;
• gray;
• caramel;
• brown.

Such colors are chosen most often, as they are neutral and calm. Black, dark grey, dark blue, dark green and dark chocolate siding are treated a little less often, because such materials seem too gloomy to many consumers. In fact, houses finished in this way look very attractive and presentable. The main thing is to use light window frames and a roof of a different shade - dark colors should be diluted with contrasting details.

Often houses are finished with metal siding of different colors. For example, in one building, all the walls can be sheathed in white, and the corners can be dark brown or burgundy panels.

The design of a private house can be made more interesting if all the walls outside are sheathed with siding of the same color., and supplement window openings with edging from other materials in contrasting tones.

Siding that imitates wood looks organic with a roof of almost any color. In addition, in tandem with such a cladding, inserts and various details of contrasting shades will harmoniously overlap. For example, it can be burgundy window frames or dark brown exterior sashes and front door.

Facades finished with siding combined with brick or masonry (artificial or natural) look beautiful. Most often, the stone is laid in the lower half of the building, and the rest of the vertical is trimmed with metal panels of different colors.

Manufacturers

High-quality metal siding is produced by many manufacturers. Let's take a closer look at the most popular of them.

grand line

This is one of the few companies in the Russian and European markets that produces panels based on metal profiles, as well as PVC finishing materials. The products of this famous brand is very popular. Grand Line metal siding is of the highest quality, since it uses environmentally friendly raw materials for its production. During the manufacturing process, metal siding is subjected to constant checks, so the risk of acquiring defective parts is reduced to zero.

"Metalset"

The Metallokomplekt group of factories produces high-quality metal siding soffit. It can be used for finishing roofing cornices, country roofs, arbors, porches and other roofing bases. The assortment of this large manufacturer includes smooth and perforated varieties of siding.

All products manufactured by the Metallokomplekt group of plants comply with quality standards and the required state standards.

"INSI"

The INSI company offers a choice of consumers not only durable and wear-resistant metal siding, but also all the necessary extensions - platbands, slope elements, corners, decorative elements, spillway parts and initial strips.

Tekhpromstroy

A large manufacturer of metal profile products, located in Ufa.

The main directions of this enterprise are:

• production of coatings for finishing the facades of buildings and roofs;
• development and creation of metal-profiling equipment;
• creation of high-tech lines for applying polymer-based powder coatings.

In addition, Tekhpromstroy carries out construction and installation works and provides services for laser cutting metal.

The range of this manufacturer includes:

• facade cassettes;
• linear panels;
• facade systems;
• additional elements intended for facade materials;

• drainage structures;
• roofing details;
• chimneys and caps;
• roof safety structures;
• metal doors;

• ventilation systems;
• ventilation grates;
• sliding gates;
• corrugated board;
• metal siding.

As you can see, this manufacturer specializes in the production of a variety of materials and structures necessary for the design of facades and roofs of buildings. Tekhpromstroy produces metal siding with a width of 240-270 mm, a length of up to 6000 mm and a thickness of 0.45-0.55 mm.

"Crown"

The company "Krona" specializes in the production of high-quality facade and roofing finishing materials. The range of this manufacturer includes more than 3000 items. Moreover, the list of products manufactured by Krona is constantly updated with new products.

metal facade panels from this manufacturer have the following advantages:

• they perfectly protect the insulation and walls of the house from precipitation and other adverse external factors;

• thanks to these finishing materials bearing walls will always remain dry, as they contribute to the optimal retention of the dew point in the insulation layer;
• in the Krona metal siding, a ventilation gap is provided, due to which moisture will not accumulate in the insulation;
• using such a facing material, you will provide the building with additional sound insulation;
• metal siding "Krona" is fireproof and durable.

Sheathing with metal siding at home today is one of the most popular ways to finish the facade. It has an undeniable advantage over others. facade materials cost, for example.

When purchasing it for finishing a building, consumers often do not know how to sheathe a house with metal siding with their own hands.

Basic material parameters

Metal siding is a facing material made from galvanized iron sheets. These are lightweight steel panels coated with a polymer film. various colors and shades. Used metal siding for house cladding.

Note! Sheets of material are equipped with special grooves for joining when laying panels vertically on top of each other. Therefore, the screw heads are well closed from the outside and make the facade aesthetically attractive.

Available in the following sizes:

• The slats have a total width of 211 mm, and a usable width of 188 mm.
• The manufacturer offers strips with a length of 0.5-6 meters.

Material Quantity Calculation

Instructions for sheathing a house with metal siding include ways to calculate the amount of material depending on the complexity of the structure:

• Siding has certain geometric dimensions, it can be calculated with an accuracy of 1 m² (see).
• It is more convenient to make a schematic drawing of the house and apply all dimensions to it (height, width of walls, window, door openings).
• Before sheathing the walls with metal siding, it is necessary to determine the area of ​​\u200b\u200bthe building that is planned to be sheathed with panels.

As a rule, calculations are performed according to the formula:

• S total \u003d S walls - S openings.
• It is good to draw up a diagram, which will indicate the exact location of the strips of material on each wall of the house.

Advice. Using such sketches allows you to perform the calculation more accurately, as well as get the installation diagram.

• It is convenient to use it when cladding a house with metal siding with your own hands.

According to the sketch of the house with the location of the panels, you can calculate the number of panels \u003d H / S of one panel (H is the height of the building).

Calculation of the number of components

Exist different variants house cladding with metal siding, with a different number of components:

Name	Purpose	Interchangeability	Calculation method
Starting and finishing rails.	It is used to fasten the bottom row of panels, and the finishing one is used to complete the mounted surface.	A lock is cut off from the panel, which is installed as an initial bar. The remaining strip is mounted final.	The length of the perimeter of the house (in running meters) is divided by the length of one bar and the number in pieces is obtained.
External and internal corners.	sheathing metal walls siding involves using them to decorate the corners of the building.		It is recommended to count the corners individually (their junctions are visible, it is better to avoid this). In principle, the number of corners of the house is multiplied by their height, and the result is divided by the length of the profile.
J profile.	It is installed as the end of the plane, usually it should close the vertical ends (windows, doors) and diagonal ones (pediments).	Can replace the finish bar.	Calculated in linear meters to get the quantity, this value is divided by the length of the profile.
H-profile.	Used to connect siding panels.	Wall cladding with metal siding can be done without joints (the length of the panels is selected according to the width of the wall).	By the piece.
window profile.	It is installed if the door or window openings are recessed deeper than 20 mm.	J - profile, if its width is sufficient.	By the piece.
Platband.	Used for finishing openings.	The house can be sheathed with metal siding using a J-profile.	By the piece.

Varieties of material

A fairly extensive range of colors and textures of metal siding is offered for sale:

• There is a material that makes it possible to finish the facade “under the tree” (see), to perform imitation under the rounded timber.
• Can be considered various options sheathing of houses with metal siding. For example, when finishing, use a material with a protective and decorative coating under a log.
• This siding is distinguished by a layer that imitates wood texture and color. Thus, the sheathed house becomes like a log house.

Note! Important in this case is the moment that when finishing natural wood foundation needs to be reinforced.

Siding stylized as wood or stone (see) with all fasteners weighs so little that the load of the sheathing itself can be ignored. In addition to weight, this material has a number of other advantages.

Key Benefits

Metal siding is characterized by:

• Quick and easy do-it-yourself installation technology.
• High strength and practicality (does not fade, does not burn, does not rust).
• Durability (will last at least 50 years).
• Wide temperature range of operation (in the range -50°С ... +50°С).
• Many are attracted by the price of the material, but its use has other positive aspects. For example, it is convenient for them to decorate houses with complex geometry.
• Metal siding is used for. Insulation is placed under the material and additional heat and sound insulation is created.

Facade cladding with metal siding can be carried out on newly erected walls, and work can be carried out in any season of the year.

Installation guide

On external walls mount the frame - the basis of the future facade. More often a metal profile is used, sometimes - wooden beam.

So:

• The crate is vertically leveled in increments of about 500 mm.
• Sheathing with metal siding of the house begins with the fastening of the lower horizontal row of planks and continues with the installation of subsequent rows.
• Metal siding is attached to the crate using self-tapping screws screwed into the center of a special mounting hole.

Advice. It is necessary to leave a gap of about 1 mm between the bar and fasteners, then a change in the temperature regime will not lead to deformation of the material.

The whole process can be conditionally divided into stages:

• Surface preparation.
• Applying markup.
• Installation of brackets.
• Thermal insulation.
• Installation of profiles and other elements.
• Siding attachment.

Walkthrough

Operations must be performed in this order. To avoid any difficulties, before starting work, it is recommended to watch the video in this article.

Advice. On preparatory stage everything that can interfere with the cladding process (antennas, plums, etc.) must be removed from the facade of the building. Retracted old finish facade and any surface defects are corrected.

• The façade is marked. It is necessary to outline the areas of the sheathed surface, taking into account the sequence of work. You also need to specify the position of the fasteners with the installation of beacons.
• Next, it is necessary to mark the attachment points of the brackets in increments of 0.5 m (horizontally) and 0.8 m (vertically).

Before the house is sheathed with metal siding, brackets are installed according to the finished markings. Why drill holes with a diameter under which dowels or anchor nails will be used.

Working with brackets

Brackets are attached to the isolon gasket. IN different conditions various lengths of brackets and fasteners are used.

With an uneven surface of the house (by level), the brackets are selected as follows:

• When attaching the brackets at the lowest level, they must protrude beyond. For example, there is a significant depression on the surface. Then a bracket is installed, the size of which is 2-3 cm larger.
• Before sheathing the house with metal-plastic, insulation is fastened tightly end-to-end. When choosing the thickness of the material, the climatic conditions of the area are taken into account. Plate-shaped nails are used for mounting the plates, which ensure reliable fixation of the insulation.

They are made of 2 parts:

• Plastic dowel with a wide cap.
• Metal rod.

The number of fasteners is taken at 6-7 pcs / m² of insulation, to protect which a vapor-permeable membrane is used. It is fixed with an overlap of 10 cm.

Mounting guides

They are fixed to the brackets with 4.8x28 mm self-tapping screws or rivets.

Advice. After that, the finishing plane is necessarily adjusted by changing the length of the brackets within 3 cm (the corresponding instruction is used).

The rest of the design elements are installed in the same way:

• Drain fixtures.
• Guide rails and slats.
• Corner connections.

Let's take a closer look:

• Plinth drain with guide rail attached to vertical profiles self-tapping screws 4.2x16 mm. The horizontal position of the siding must be checked by a level.
• Sheathing with metal siding of the house begins with the laying of the first row of planks, installed to the initial plank. The upper edge of the material is attached to the guide profiles with self-tapping screws.
• Subsequent rows are fixed in the same way: they are laid one on top of the other.
• When working, it is necessary to regularly check the levelness of the planks with a level. Recommendations on how to properly sheathe a house with metal-plastic pay attention to the fact that the planks cannot be fastened too tightly to the frame.
• When temperatures fluctuate, the dimensions of the plates change, which can lead to serious deformation of the entire system.

At the end, the last row is attached, adjacent to the roof, using shaped elements with special strips. You can compare the result with a photo of warm and beautiful facades.

Metal siding is a very popular finishing material with high performance and characteristics. To the number undoubted advantages metal siding should be attributed to the extreme simplicity of its installation. Having studied the proposed recommendations, you will be able to handle the finishing work with your own hands, without spending money on the services of third-party craftsmen and in full control of the entire process.

Before proceeding with the study of the manual for the installation of metal siding with your own hands, it is recommended to consider the main properties and study the features of this material.

Metal siding is based on metal panels. Features of the material allow it to be successfully used for exterior decoration of facades of various buildings, fences and other structures. Sheets can have a variety of shapes - from the traditional rectangle to products that imitate timber, plank sheathing and other materials.

Each panel of material under consideration comes with a special mounting plate with pre-prepared holes for screws and nails. Between panels connected with special locks.

Along with the main panels for finishing the facade or other structures, you will have to buy various additional elements in the form of corner panels, starting bars, slopes etc. Each of the listed products has special fasteners, which allows you to install the entire finish quickly and effortlessly.

The manufacturing technology of metal siding is in many ways similar to the process of manufacturing metal tiles. The panels consist of several layers, namely:

• metal base. The basis function is performed by galvanized steel. The thickness of the base layer reaches 0.7 mm;
• passivating coating. This layer is responsible for protecting the base material from corrosion and other adverse effects;
• ground layer;
• polymer coating. This layer provides reliable protection of metal siding from adverse effects and is responsible for its aesthetic qualities;
• varnish coating. Designed to protect the polymer layer. It comes in matte and glossy.

Layers of metal siding can have a different configuration. Various materials are also used as a polymer layer. The cost of the finished product directly depends on the type of polymer and the characteristics of other layers of material.

Do-it-yourself installation of metal siding is a relatively simple procedure. Some efforts, of course, will have to be made, but there is nothing super complicated in the device of such a finish.

First of all, calculate the required amount of material. To do this, you just need to measure the width and height of the surfaces that will be sheathed with metal siding. At the place of purchase of the material, a consultant will help you calculate right amount sheets based on measurements taken.

Additionally, add to the estimate the need to purchase various related products mentioned earlier. It is better to buy all the components at once along with the main material, because. otherwise, you may have problems finding accessories in the right shade.

To store metal siding, you need to allocate a closed room, or at least build a canopy that would protect the sheets from precipitation.

Metal siding is best cut into the necessary pieces at the place of purchase. If you will do the cutting yourself, use a jigsaw or a special reciprocating saw for this. Start cutting from the edge equipped with perforations for fasteners.

Do not use a grinder to cut metal siding. The disk is grinder it heats up quite strongly during operation, which leads to a violation of the structure of the polymer and other layers of the material. Such damage will contribute rapid development corrosion.

The surface for mounting metal siding must be perfectly flat, so special attention should be paid to the preparatory stage.

Do not forget that metal tends to expand and contract with changes in temperature conditions, therefore metal siding sheet must not be screwed to the base until it stops. The optimal gap between the sheet and the head of the self-tapping screw is about 1 mm. If you screw the sheets all the way, after a while the coating will simply deform and lose its presentable appearance.

The sheet must begin to be fastened from the center point to the corners. Place self-tapping screws strictly in the center of the factory technological holes. If you install fasteners off-center, during the temperature deformation of the metal siding sheet, the fasteners can damage the material.

Remember the main mistakes of novice installers and avoid them in the process. Failure to follow the basic technological recommendations will cause you a lot of trouble in the future. For example, in the absence of a gap between the screw heads and metal siding, the finish, as already noted, will deteriorate very quickly.

Examine the design of the panels before starting installation. The material is equipped with a special mounting edge with holes. Fasteners, as already noted, must be placed in the center of such holes. If this condition is met, the mounting strip will be able to move during temperature deformations of the material without harm to the coating.

Preparing the surface for the installation of metal siding

Traditionally, metal siding is mounted on a crate. The device of the crate is carried out in several steps.

First step. Carefully study the condition of the facade of the building being finished. Get rid of crumbling plaster climbing plants, brackets and other items. Treat the base with an antiseptic composition.

Second step. Prepare the markup for the crate. When placing panels vertically, the crate should be horizontal. If you mount the panels horizontally, fix the battens in a vertical position. The optimal step of the crate is 30-40 cm. Mark the entire surface to be treated.

Third stage. Install the brackets according to the markup. The functions of the brackets are traditionally performed by metal profile hangers. It is enough to attach the product to the wall with an anchor bolt, and then bend the hanger 90 degrees. It is recommended to lay paronite or other similar material between the wall and the bracket. Such a gasket will prevent the formation of a cold bridge.

Fourth stage. Perform external wall insulation. Good for warming mineral wool in slabs. Cut holes in the plates in accordance with the places where the brackets are to be installed. Attach the insulation to the wall with dowels. Thermal insulation must be covered with a layer of polyethylene film.

Fourth stage. Attach the battens to the brackets. In the case of metal siding, the crate can be assembled from wooden bars measuring 4x4 cm or from a galvanized profile. When using wood, remember that it must have low humidity. Fasten all the bars in accordance with the markup and proceed directly to the installation of metal siding.

Metal siding installation guide

Metal siding is mounted according to a very simple scheme. Step by step guide will allow you to do everything by hand.

First stage. Fix the corner elements of the metal siding. Set the element to the appropriate angle, level it using the building level and attach it to the crate with a self-tapping screw. Please note that some corner elements are only attached after the installation of the main finishing panels. Specify this point in the instructions for the purchased material.

Second phase. Proceed to the installation of the main panels. Sheathing with metal siding is performed from the bottom up. Install the starter bar over the plinth. Align the bar and attach it to the crate with self-tapping screws. Self-tapping screws must be screwed strictly into the center of the technological holes. Remember about the millimeter gap between the panel and the head of the screw.

Third stage. Sheathe the entire surface to be finished with the main panels. Remove from metal siding protective film. If the panels are not long enough, join them with specially designed planks. The panels, as already noted, are fixed from the center to the corners.

At the stage of finishing surfaces near doors and windows, panels will most likely have to be cut. Small parts of metal siding can be cut off with metal shears. Cut large sections with a jigsaw.

Fourth stage. Install slopes, platbands, window sills, ebbs and special strips that close the gap between the facade and the roof.

Now you know the sequence in which the installation of metal siding is carried out, and you will be able to handle the finishing with your own hands. Depending on the features of the building and the type of metal siding, the finishing technology may undergo certain changes, but in general, the work is carried out exactly according to the considered scheme.

Follow the recommendations received, and you will create a beautiful, reliable and durable finish. At the same time, you do not have to spend money on anything other than materials, and in addition you can be sure of the quality of the sheathing, because you will personally control the implementation of each stage of installation.

Successful work!

Video - Do-it-yourself metal siding installation

Sheathing with metal siding at home today is one of the most popular ways to finish the facade. It has an undeniable advantage over other facade materials in terms of cost, for example.

When purchasing it for finishing a building, consumers often do not know how to sheathe a house with metal siding with their own hands.

Basic material parameters

Metal siding is a facing material made from galvanized iron sheets. These are lightweight steel panels covered with a polymer film of various colors and shades. Used metal siding for house cladding.

Note! Sheets of material are equipped with special grooves for joining when laying panels vertically on top of each other. Therefore, the screw heads are well closed from the outside and make the facade aesthetically attractive.

Do-it-yourself sheathing of a house with metal siding is considered a great way to insulate the facade and improve its design.

Available in the following sizes:

• The slats have a total width of 211 mm, and a usable width of 188 mm.
• The manufacturer offers strips with a length of 0.5-6 meters.

Material Quantity Calculation

Instructions for sheathing a house with metal siding include ways to calculate the amount of material depending on the complexity of the structure:

• Siding has certain geometric dimensions, it can be calculated with an accuracy of 1 m² (see Calculation of siding for a house: how to do it right).
• It is more convenient to make a schematic drawing of the house and apply all dimensions to it (height, width of walls, window, door openings).
• Before sheathing the walls with metal siding, it is necessary to determine the area of ​​\u200b\u200bthe building that is planned to be sheathed with panels.

As a rule, calculations are performed according to the formula:

• S total \u003d S walls - S openings.
• It is good to draw up a diagram, which will indicate the exact location of the strips of material on each wall of the house.

Advice. Using such sketches allows you to perform the calculation more accurately, as well as get the installation diagram.

• It is convenient to use it when cladding a house with metal siding with your own hands.

According to the sketch of the house with the location of the panels, you can calculate the number of panels \u003d H / S of one panel (H is the height of the building).

Calculation of the number of components

There are different options for sheathing a house with metal siding, with a different number of components:

Varieties of material

A fairly extensive range of colors and textures of metal siding is offered for sale:

• There is a material that makes it possible to finish the facade "under the tree", to perform imitation under the rounded timber.
• You can consider various options for sheathing houses with metal siding. For example, when finishing, use a material with a protective and decorative coating under a log.
• This siding is distinguished by a layer that imitates wood texture and color. Thus, the sheathed house becomes like a log house.

Note! Important in this case is the fact that when finishing with natural wood, it is necessary to further strengthen the foundation.

Siding stylized as wood or stone with all fasteners weighs so little that the load of the sheathing itself can be ignored. In addition to weight, this material has a number of other advantages.

Key Benefits

• Quick and easy do-it-yourself installation technology.
• High strength and practicality (does not fade, does not burn, does not rust).
• Durability (will last at least 50 years).
• Wide temperature range of operation (in the range -50°С ... +50°С).
• Many are attracted by the price of the material, but its use has other positive aspects. For example, it is convenient for them to decorate houses with complex geometry.
• Metal siding is used for arranging ventilated facades. Insulation is placed under the material and additional heat and sound insulation is created.

Facade cladding with metal siding can be carried out on newly erected walls, and work can be carried out in any season of the year.

Installation guide

A frame is mounted on the outer walls - the basis of the future facade. More often, a metal profile is used, sometimes a wooden beam.

• The crate is vertically leveled in increments of about 500 mm.
• Sheathing with metal siding of the house begins with the fastening of the lower horizontal row of planks and continues with the installation of subsequent rows.
• Metal siding is attached to the crate using self-tapping screws screwed into the center of a special mounting hole.

Advice. It is necessary to leave a gap of about 1 mm between the bar and fasteners, then a change in the temperature regime will not lead to deformation of the material.

The whole process can be conditionally divided into stages:

• Surface preparation.
• Applying markup.
• Installation of brackets.
• Thermal insulation.
• Installation of profiles and other elements.
• Siding attachment.

Walkthrough

Operations must be performed in this order.

Advice. At the preparatory stage, everything that can interfere with the cladding process (antennas, plums, etc.) must be removed from the facade of the building. The old facade finish is removed and any surface defects are corrected.

• The façade is marked. It is necessary to outline the areas of the sheathed surface, taking into account the sequence of work. You also need to specify the position of the fasteners with the installation of beacons.
• Next, it is necessary to mark the attachment points of the brackets in increments of 0.5 m (horizontally) and 0.8 m (vertically).

Before the house is sheathed with metal siding, brackets are installed according to the finished markings. Why drill holes with a diameter under which dowels or anchor nails will be used.

Working with brackets

Brackets are mounted on an isolon gasket. In different conditions, different lengths of brackets and fasteners are used.

With an uneven surface of the house (by level), the brackets are selected as follows:

• When attaching the brackets at the lowest level, they must protrude beyond. For example, there is a significant depression on the surface. Then a bracket is installed, the size of which is 2-3 cm larger.
• Before sheathing the house with metal-plastic, insulation is fastened tightly end-to-end. When choosing the thickness of the material, the climatic conditions of the area are taken into account. Plate-shaped nails are used for mounting the plates, which ensure reliable fixation of the insulation.

They are made of 2 parts:

• Plastic dowel with a wide cap.
• Metal rod.

The number of fasteners is taken at 6-7 pcs / m² of insulation, to protect which a vapor-permeable membrane is used. It is fixed with an overlap of 10 cm.

Mounting guides

They are fixed to the brackets with 4.8x28 mm self-tapping screws or rivets.

Advice. After that, the finishing plane is necessarily adjusted by changing the length of the brackets within 3 cm (the corresponding instruction is used).

The rest of the design elements are installed in the same way:

• Drain fixtures.
• Guide rails and slats.
• Corner connections.

• The basement drain with a guide rail is attached to the vertical profiles with self-tapping screws 4.2x16 mm. The horizontal position of the siding must be checked by a level.
• Sheathing with metal siding of the house begins with the laying of the first row of planks, installed to the initial plank. The upper edge of the material is attached to the guide profiles with self-tapping screws.
• Subsequent rows are fixed in the same way: they are laid one on top of the other.
• When working, it is necessary to regularly check the levelness of the planks with a level. Recommendations on how to properly sheathe a house with metal-plastic pay attention to the fact that the planks cannot be fastened too tightly to the frame.
• When temperatures fluctuate, the dimensions of the plates change, which can lead to serious deformation of the entire system.

At the end, the last row is attached, adjacent to the roof, using shaped elements with special strips. You can compare the result with a photo of warm and beautiful facades.

House cladding with metal siding

To date, sheathing a house with metal siding has become a fairly popular method of exterior decoration of building facades. First of all, it is related to good combination price and quality of this material.

In addition, it has certain advantages that the owners of wooden buildings should pay attention to. The main thing is to carry out the installation correctly and correctly on the basis of the existing rules and expert advice.

Material Advantages

Home decoration should always be carried out only with the help of high-quality and reliable materials. Among them, it is worth highlighting metal siding. Before sheathing a building with it, you need to figure out what positive qualities it has. Among them, experts highlight the following advantages of this material:

• Simplicity and speed of installation on the facade of the building.
• Affordable price for a wide range of buyers.
• High level of durability.
• Practicality of use.
• No rusting process.
• Non-combustible even at high temperatures.
• Durability, expressed in the operational period of at least 50 years.
• Possibility of use in the range from -50 to +50 degrees Celsius.

Metal siding is even used to equip ventilated hinged facades. Its installation is carried out on a specially prepared crate attached to the walls of the structure.

When finishing a house, it is very important to initially install the bottom row of siding in a horizontal position, after which the rest are adjusted to the position of the first plank.

Required tool

In order to sheathe a house with siding with your own hands, you must first prepare the appropriate tool. Among the devices and fixtures, it is worth highlighting the following things:

• construction roulette;
• homemade plumb;
• building level (water or laser);
• hammer;
• marker or pencil;
• hacksaw for metal;
• metal scissors;
• perforator;
• screwdriver

For sheathing a house with siding, it is also necessary to prepare self-tapping screws, through which the material is attached directly to the crate itself. Their size should depend on what the building itself is made of (wood, blocks, bricks, etc.).

It should be noted that the preliminary organization of the process of sheathing and finishing houses with metal siding greatly facilitates this type of activity and speeds up its implementation.

Preparatory work

For proper conduct work must first prepare the surface. This implies the elimination of existing defects on the facades. These specialists, first of all, include exfoliated sections of plaster or fallen off bars and boards. wooden house. It is also worth completely removing dust from the building. In addition, it is necessary to dismantle various devices, such as antennas, drain pipes, signs, etc.

When there are no obstacles left on the house for further work, it is worth approaching the beginning of the markup. To do this, it is worth understanding some terms, among which the most important is capture. It means the surface that the master is going to sheathe with one plank of metal siding. These zones should be marked on the facade with an archer or a pencil.

Additionally, it is worth noting the places where the cladding will be fastened. The brackets should be spaced 60 centimeters horizontally and 80 centimeters vertically. Once this is done, the appropriate beacons can be installed.

Installing brackets

It is necessary to install the brackets according to the previously applied grid. In order to do this, you need to drill holes in the walls for those dowels that will later be used for screws. The brackets themselves should be mounted only on the isolon gasket.

In order to properly sheathe the house, it is worth choosing the length and type of brackets in accordance with the existing conditions. If the walls of the building are very uneven, then by fixing this structural element at its lowest point, it should protrude slightly beyond the edge of the largest convex part of the façade.

For example, if the structure has depressions of about 10 centimeters, then the length of the brackets must be at least 12 centimeters in the deepest place in the vertical plane. Thus, the cladding of the building with metal siding will be carried out as correctly and correctly as possible.

Thermal insulation layer

Not less than important element of all work is the process of building insulation. It is very important to place the slabs of the respective material right next to each other. There should be no gaps between them. through which he can winter period time to pass cold air. For installation, you can use special dish-shaped nails.

Dish-type fasteners are distinguished by the presence of a large plastic cap, which allows you to hold the plates well, preventing them from deforming. It is worth using 6-7 nails per square meter of insulation. In this case, a wooden rural hut can become more comfortable and cozy in the winter, when the frost reaches -40 degrees Celsius.

Installation of profiles and other elements

When all work on the insulation of the building is completed, it is worth starting the installation of guides for metal siding. They must be installed on brackets, using self-tapping screws measuring 4.8x28 millimeters for connection. Instead, special rivets can also be used.

Once the guides are installed, it is worth adjusting the length of the brackets to align the structure in the vertical plane. When this is done, you can start installing drain fixtures, corner joints, etc. Do not forget about the slope strips for the window sill.

Facing should begin with a basement drain and a metal siding guide bar. Attach these elements to a wooden or brick house stands with self-tapping screws 4.2x16 millimeters. Installation of this kind is carried out along the lower edge of the vertical profiles.

In order for the sheathed house to look beautiful, it is necessary to check the installation of each element using the building level. If at least one plank is attached incorrectly, the end result will be unsatisfactory, which will require the work to be done again.

Siding fixing

Sheathing a house with metal siding strips should be carried out in a certain order:

• It is worth attaching the first row of siding to the starting bar.
• The upper edge of the first row of planks should be attached with self-tapping screws to the installed guide profiles.
• The next rows should be mounted in the same way. In this case, it is imperative to check their horizontal level.
• At the final stage, it is worth making the last row adjoin the roof with the help of shaped elements and special strips.

Metal siding is strictly contraindicated to be closely installed to vertical elements. This is due to the fact that this material is able to change its dimensions depending on the temperature regime on the street. Tree on conditions environment also reacts, but it does not deform very much, changing its dimensions in comparison with the metal.

Conclusion

Before you start sheathing a house using metal siding strips, you need to learn how to properly implement this work so as not to make mistakes. In this case, you can get really good results for many years. It is possible to finish in this way not only brick and block, but also wooden structures, which is a huge advantage for this material.

Sheathing a house with metal siding: how to properly clad a house with metal siding?

How to sheathe a house with metal siding. Advantages of the material and the necessary tool. Preparatory work and installation of brackets. Siding attachment.

Sheathing a wooden house with do-it-yourself siding - the technology of work and the types of materials used

sheathing wooden houses siding is the easiest option for transforming a building without significant costs and major repairs. That is why this decision so popular with developers and used so often. Consider what types of material are and how to properly organize the workflow in order to achieve the best result.

In the photo: sheathing an old wooden house with siding allows you to give it a modern look in just a couple of days

Product types

First of all, let's figure out which siding to choose for cladding a wooden house. Most often, one of the following options is used:

To finish the foundation, a special vinyl-based plinth siding is used, it is characterized by increased strength and has various options for textures that imitate brickwork, a natural stone and much more.

The plinth must be covered with a special facing material

Let's find out if it is possible to sheathe wooden house siding without harm to the structure? Everything is simple here: if the technology is followed and proper preparation is carried out, then no problems will arise in the future, because the design is breathable and well ventilated.

Description of the workflow

If you do the work yourself, then you will have to deal not only with installation, but also preparatory activities and the acquisition of everything required, so we will begin our consideration with these nuances.

Preparation

First of all, you need to purchase everything you need:

• The main material is calculated as follows - the building plan is taken, the area of ​​\u200b\u200ball walls is calculated, openings are subtracted from this figure wooden windows and doors. It is best to consider not only the total volume, but also plan the position of the panels, so you can determine in advance where to use the trimmings and whether you can save money due to the competent layout of the elements.
• It is also necessary to purchase components that are quite diverse - from platbands and near-window panels to initial, finishing, connecting strips and other elements. All these details are calculated in linear meters so as not to overpay and not to purchase unnecessary materials, the photo below shows what the main components look like.

Dimensions may vary depending on the manufacturer, but the purpose remains the same.

• To preserve wood, the surface should be covered with a waterproofing vapor-permeable membrane; it will significantly extend the life of the structure by maintaining optimal moisture content in the material. On top of the insulation also spreads special film, it protects the mineral wool from wind and moisture from the outside, but is vapor-permeable from the inside.

A special membrane will protect the structure from moisture

• For the frame you will need either wooden blocks, or metal galvanized profile. The second option is much stronger, but its cost is much higher, so the choice depends only on your preferences and capabilities.

How to carry out work

The technology of sheathing a wooden house with siding is quite simple, so even those who never carry out such work can handle it, the sequence of operations is as follows:

• First, the surface is cleaned of contaminants and treated with a fire-retardant composition so that the material becomes resistant to fire and is not subject to decay and damage by pests. If there are areas affected by mold, then you should definitely get rid of them, do not leave the fungus inside.
• Further, the base is closed with a vapor-permeable membrane, this is done before the installation of a wooden crate. The easiest way to work is to use a construction stapler, it is easy to use and allows you to fix the material much faster than any other method.

Do not neglect this step, because it allows you to create an additional dampness barrier in cold period of the year

• Next, you need to make a strong frame, for this you use either a bar with a section of 50x50 or more, or a metal profile, usually the height of the crate should be equal to the thickness of the insulation. The most important thing at this stage is to create an even base, so control the position of each element with the help of a building level, you can stretch the cord between the extreme posts to create an additional guideline.

In order to adjust the position of the frame, it is easiest to use hangers for fastening, they are pre-screwed to the base along the line of the bar, then they are bent and fix the position of the element exactly as needed.

Metal frame - expensive, but very high quality solution

• Further, a heater is laid between the crate, it is best to use mineral wool with a thickness of 50 mm or more. The pitch of the frame should be equal to the width of the sheets for thermal insulation, usually this figure is 50-60 cm. If insulation is not required, then this and the next step is not necessary.
• After warming, the surface is covered with a waterproofing material and a counter-lattice is made on the surface of the frame, for this a bar with a thickness of 20 mm is suitable. This is necessary to create ventilation under exterior finish and prevent condensation.
• After carrying out all the above measures, you can proceed with the installation of the siding, first the starting bar is attached and the first sheet is inserted into it, everything is quite simple and fast. The elements are fixed either with galvanized nails 3x30 with an enlarged head, or with the help of self-tapping screws with a press washer measuring 4.2x25 mm or 4.2x19 mm.

Mounting siding is a simple and fairly quick process.

Do not press the strips too hard so as not to deform them, they should simply be fixed, this will compensate for the change in the dimensions of the material during temperature changes.

• The last stage is the fastening of all additional elements, which were not set initially, on this work can be considered completed.

Sheathing a wooden house with metal siding is carried out according to the same scheme, as you can see, the skillfully applied pattern is very similar to real wood

If you need to quickly and inexpensively transform the facade of a wooden house, then siding will be an excellent solution.

Do-it-yourself sheathing of a wooden house with siding: video installation instructions, features of metal siding, which one to choose, whether it is possible to sheathe, technology, price, photo

Do-it-yourself sheathing of a wooden house with siding: video installation instructions, features of metal siding finishing, which one to choose, whether it is possible to sheathe,

Do-it-yourself metal siding at home

Metal siding is a common cladding for seasonal wooden houses or other buildings. It is notable for its low cost, ease and speed of installation, as it has a large size, more than other types it protects private buildings from external factors. However, it has its own nuances, so finishing a wooden house with metal siding should be carried out strictly according to the instructions.

Disadvantages of profiled sheets and individual slats

The advantages have already been said - low price, home protection. However, they should not mislead the owners regarding the ideality of the material - the disadvantages of such a cladding are significant. More:

1. Susceptibility to corrosion. Metal and moisture are not the best neighbors. Siding from it is sold treated with mastics or other compounds to prevent rust stains. However, during installation, you will need to cut it to the desired dimensions and the edge will be bare. Owners should be aware that self processing the cut is extremely important.
2. Cold lining. Finishing a wooden house with metal siding is necessarily accompanied by insulation, since the material itself is not able to retain heat. In addition, there must be a layer between the wood and iron, otherwise the temperature difference will necessarily lead to the formation of condensate, and then the house runs the risk of starting to rot.
3. Bad soundproofing. Even if modern mattresses are laid under the lining, then the cannonade at night from the weather is guaranteed.

Instructions for sheathing a wooden house with metal siding

To do a quality job, you should start with the right choice of products and the subsequent preparation of surfaces. So:

• The choice of a quality product depends on the conscientiousness of the manufacturer and its period of being on the market. construction market. If you have to buy goods in an unfamiliar network, then you should pay attention to the color of the raw materials - metal siding for finishing a wooden house should be without visible streaks and a fine grid of cracks. Their presence indicates a poor-quality coating, which will peel off from the profiled sheet over time.

To work on the entire surface of the house, not only sheets or planks are purchased, but also a starting profile, corners - external and external, platbands, connections. It is also worth checking each element for the functioning of the lock mates - they should easily snap into place.

• Next, prepare the walls. This means cleaning from the surface from protruding parts - trim, thresholds, window sills. Dirt, rubbish is also swept out, caulking is changing.

In advanced cases, whole whips are changed. Otherwise, finishing a wooden house with metal siding will be a waste of time - damage in the form of wet rot and mold will pass to the sheet, and then corrosion is within easy reach.

• The next step is the preparation of the crate. For all types of siding - from wooden lining to fiber cement panels, one rule works - they install profiles for attaching planks strictly perpendicular to the sheathing itself. That is, if it is decided to lay the siding horizontally, then the crate has only vertical guides and vice versa.

The metal profile or wooden beam for the crate should be wide. The calculation is simple - the thickness of the insulation + 1.5 cm of free space. The fastening step is 50-60 cm, that is, the standard styrene plate will enter the crate sector tightly and without gaps.

• The choice of insulation. Finishing houses outside with metal siding is not complete without insulation. Firstly, an old log, not to mention a beam, does not hold heat well.

• After the slabs or mats are laid, proceed to attach the waterproofing. In this capacity, rolled rubber, polymer film or other materials that can even trap vapors are good. Waterproofing is fixed with a furniture stapler.
• Now you can start lining. Horizontal or vertical finishing with metal siding of houses begins with the installation of the starting bar. The position of the entire canvas depends on it, which means that you should act strictly according to the level.

Fastening the bar, in fact, like all siding, should not be tightly, keeping in mind that compensation gaps are needed. Without bringing the screws to the end by 1-2 mm, you can complete this task.

The bar is fixed with a groove down, this will save the siding from accidental raindrops and stagnation there. Further, the work will go on knurled: the next sheet is inserted into the bar and fastened in a similar way.

• The corners, especially if the house is chopped into a bowl, that is, with the remainder, are lined in the same way as other surfaces, you just have to pay special attention to their insulation. You can’t leave them outside, they already take on the cold of the Russian winter.

There is a special corner siding on sale, it will neatly close the protrusions from the common box. After complete installation, slopes, ebbs and other fittings are attached.

• Beautiful decoration of the facade of the house with metal siding is achieved by selecting contrasting elements. If you make slopes, ebbs, window sills of a different color than the general background, then the object will not look gray and dull, but with a claim to presentability. By the way, the general background should be light - this is taken into account when purchasing - the sun's rays will affect the color and over time it will begin to fade.

Objects with imitations of timber, stone, brick and other decorations will also look unusual. Finishing a house with metal siding under a log is the most popular.

Finishing a wooden house with metal siding outside: step by step instructions

Do-it-yourself vertical finishing of house facades with metal siding: shortcomings of profiled sheets and individual planks, step-by-step instructions for self-plating, recommendations from experts, log imitation