Brick wall decoration options and decorating tips. Do-it-yourself imitation of a brick wall - step-by-step instructions from preparatory to finishing work (120 photos) Combination of brick with other materials

Decorating living rooms with natural materials is a good tradition in interior design. Brick has been added to the long-loved stone, forged metal, and wood (since the middle of the 20th century). Having become a successful mainstream in the segment of living space, this material gives rooms an individual aesthetics. The seeming deliberate roughness of the brickwork in the interior emphasizes the originality of the room, its figurative contrast and immediately attracts attention - involuntarily there is a desire to touch with your hand.

White brick in the interior gives the room a special aesthetics

A white brick wall favorably sets off the elements of the decoration of the room: furniture, textiles, decor. Against its background, color accents sound in a new way and texture nuances in the interior of each room are revealed. Moreover, this is not only an affordable way of original finishing, but also the possibility of creative use of various functional structures:

• protrusions;

  arched recesses.

Decor elements on the background of a white brick wall will look new

Style secrets

Brickwork is a distinctive feature of various styles.

characteristic pastel colors;

Provencal textiles;

other decorative elements.

ecodesign elements;

natural materials;

pastel colors;

the minimum amount of decor;

white as a base (in the northern countries there is so little sun, so the light background is out of competition).

Decorative bricks can be used to create an accent wall

Rules for the use of masonry in the interior

Rule # 1

Don't be afraid to experiment!

Rule # 2

Be guided by a sense of proportion and knowledge of style.

Rule # 3

Having decided on an experiment, use brick trim in reasonable proportions, highlighting with it:

fireplace area (or hearth area);

individual architectural elements: niches, columns, arches, partitions;

accent wall.

By overusing white brick wall decoration, you can get an uncomfortable cold atmosphere instead of the expected stylish sophistication.

With the help of such a solution, it is possible to highlight specific areas in the interior.

What are we going to make bricks from?

There is a large selection of materials for decorative masonry (or its imitation). Differing in appearance, texture, price segment, they will be able to satisfy any consumer demand.

drawing a masonry joint on fresh plaster that retains the shape and dimensions of the brick;

application of plaster / putty mortar through a stencil imitating a brick texture;

having previously glued the plane with masking tape (tape) along the lines of the masonry joints, putty is applied to the marked area (with a continuous layer of the required thickness); tape (tape) is removed along with part of the mortar, exposing the natural masonry seam and creating a natural look of brick imitation.

When choosing a material for decoration, the main criterion (after aesthetic and financial) is its functional purpose for a certain type of room. So, in a small hallway, textured wallpaper with imitation is best suited, and easily washable white clinker tiles as a kitchen apron.

For different rooms, you need to select the material individually

Design secrets of white

Living room

In the case of a non-standard room layout and keeping in mind the use of just one plane with a brick surface, try to make it the most bizarre wall in shape (with protrusions, niches, recesses). In this case, laying under a white brick will adequately emphasize its individuality. If the shape of the living room is standard rectangular, then the main element of the decor will help to determine the "desired" surface: it will be placed on it.

The recreation area will also be located along such a wall. If there is a fireplace in the living room, then the question of choosing a surface for decoration disappears, since the zone of the hearth and fireplace is always highlighted with masonry elements.

A brick wall for the living room will be a great solution

Bedroom

A white brick wall in the bedroom is a great design solution. The seemingly rough white brick accentuates the comfort and softness of textiles: blankets and pillows. Decor elements will successfully appear against its background: panels, paintings, mirrors, wall lamps.

The advantage of the decorated area is that despite all the “flattening” of a pure, white, “sterile-medical” color, such a surface is not uniform, but embossed and factual.

White brick wall in the bedroom is a great design solution

Kitchen

Masonry decoration of its interior is used for the following purposes.

Fitting a kitchen apron.
The main requirement (in addition to design aesthetics) is increased functionality, its moisture and heat resistance. Therefore, white clinker tiles are an excellent choice for the kitchen.

Kitchen zoning.
Highlighting the dining area, the white background of the wall will favorably emphasize the bright colors of individual decorative elements.

Installation of a bar counter or a kitchen island (if space permits).

When choosing decorative bricks in the kitchen, it is worth considering all the nuances of the room.

Summing up

Giving the design a special originality and sophisticated charm, the use of a white brick wall in the interior of the room still has some drawbacks. Of the minuses, it is worth noting:

the relative high cost of the material;

laboriousness of installation;

reduction in the space of rooms with some types of such finishes.

This material is durable and can be combined with all interior styles.

And yet there are much more indisputable advantages. Colored and white bricks:

durable;

compatible with many interior styles;

especially durable;

resistant to moisture and temperature fluctuations;

goes well with wood, metal, glass.

Applying this type of decoration in the interior, one should remember the dimensions of the room and seek harmonious interaction with the rest of the design elements.

Video: DIY brick wall in the interior

If earlier brick was considered exclusively in the form of a building material or a residual phenomenon of old industrial buildings, now it is an excellent opportunity to bring a bright accent to any interior design - from classic to industrial. A brick wall in the interior always looks original, harmoniously combines with different colors of furniture and textiles, and also fits perfectly into any room. She will give the bedroom a slight negligence, the kitchen - comfort, the living room - conservative aesthetics.

Features of a brick wall in the interior

Such a creative and bold solution in interior design will undoubtedly delight the owners of the house and attract the enthusiastic glances of guests. In order to beat a brick wall as beautifully as possible, you need to know the winning design options. Then you can be sure of the end result. Some of the main features to consider are:

1. A brick wall will look amazing in tandem with such interior designs: loft, eclecticism, ethnicity, classic, grunge, pop art and avant-garde.

2. Non-woven / vinyl wallpaper or facing material can be a great alternative to real brick.

3. The tone of the wall does not have to match the overall color scheme. It can be two levels darker or lighter.

4. Brickwork can serve as a good decor for your favorite paintings or photographs.

5. The gloss on the brick surface (created with the help of a special varnish) can visually make the room brighter.

6. Light brick goes well with red and peach shades, coffee - with beige and gray.

7. If you do choose a brick, you should take care of professional products that can protect it from mold and mildew for a long time.

8. "Brick motif" will look great not only in one design direction, but also in a mixed version of several styles.

9. An interesting combination of wall decoration is brick and mirrors, old music records on the surface and elements of stone.

How to create a brick wall?

Real brickwork

The bare brick wall in the middle of the room is a real decorative composition that can be played up in an original way, taking into account all the features of the room. If you are the owner of an interior in an industrial or classic style, then the surface can be safely left rough and unpainted. This decision will be the most loyal. If there is a desire to make it more colorful and saturated, you should definitely use an acrylic aqualac of the desired shade. A glossy, shiny surface can be achieved with a special clinker oil.

Non-woven wallpaper

They will be a great alternative to brickwork. Non-woven fabric is very popular due to its texture, which ideally imitates natural types of finishing materials (stone, brick, wood, glass). In addition, the main difference between non-woven wallpaper is that it can be repainted in any color. This is ideal for creative people who can turn their ideas into reality without fear of the consequences. A brick wall can easily turn from white to coffee, from gray to lemon.

Vinyl wallpapers

The advantages of this choice include the durability of the material, its durability, ease of maintenance and aesthetic appearance. Vinyl wallpaper will easily correct unnecessary protrusions and bends, provide good air circulation in the room (if you leave the wall unprinted), decorate the corner of the room. It is also worth noting the fact that they can be glued on almost any wall (large-scale or compact, dense or thin), which, unfortunately, cannot be said about the installation of brickwork.

Facing brick

It is often used in wall decoration. Such material is much thinner and lighter than construction material. If a solid thick wall can withstand a solid brickwork, then a facing brick can fit even into a small partition (due to its minimum weight). This is a big plus for those who do not want to lose the bulk of the room, but still want to decorate it with such an industrial detail.

Brick wall in interior design - photo

We have put together an original photo gallery for you. She will prove that a brick wall is a great design option that fits in any design and in any room.

Brick wall in the interior of the kitchen

The kitchen is exactly that corner in the house where you always want to spend time with family and friends. A brick wall will harmoniously fit into this room, since it is able to emphasize functionality, but at the same time bring the necessary notes of aesthetics and comfort into the atmosphere. Such industrial motifs look great both in the delicate Provence style and in a more daring loft or pop art. Ideal colors for masonry or imitation wallpaper for the kitchen are sand, beige, gray, red and coffee.

Brick wall in the interior of the living room

Such a decorative element can turn a simple living room into an author's design composition. The main thing is to correctly choose the shades of furniture and textiles, as well as to supplement the overall picture with colorful accents in the form of hand-made products, family photographs, aged mirrors - depending on the general style of the interior. Then a cozy living room will become not only a place for pleasant gatherings with friends, but also a corner for drawing creative ideas and inspiration. A good brick wall color scheme for the living room is white, gray and coffee.

Brick wall in the interior of the bedroom

A great option for freshening up the bedroom, making it more eccentric and individual. A brick wall can create the necessary contrast even against the backdrop of exquisite expensive furniture and paintings. The best options for its location in the bedroom are masonry / wallpaper on the wall with two spacious windows or behind the bed. It is worth noting that brick motifs not only do not conflict, but, on the contrary, look very harmoniously with light textiles, without darkening it visually.

Brick wall in the interior of the bathroom

The bathroom is a special place where we spend precious minutes in the morning before going out and in the evening before traveling to the land of dreams. Therefore, its design should be laconic, stylish and functional. This is how it will look in combination with a brick wall. White or beige colors of such a wall will visually expand the space, will go well with ceramic sanitary ware, will bring a feeling of coziness, and coffee, bright and dark shades will create the effect of brutality, conservatism and an original approach to design.

If you think that bricks can only be used for outdoor decoration, you are wrong. Designers often use this material in the design of various types of premises. However, most often brick walls are decorated in the kitchen - a reliable, durable and beautiful material has excellent operational properties and adds comfort to the room.

The use of bricks makes any kitchen unique and cozy.

Read about how to properly design a kitchen using bricks, what are its features and how best to beat brick elements in the interior - read in our article.

Advantages and disadvantages of brick in the kitchen

Like any finishing material, brick has both pros and cons. Moreover, both those and those can be considered quite weighty.

A brick wall is a beautiful, but rather difficult move

It should be noted that brickwork as a whole is a rather peculiar material - on the one hand, it looks very stylish, on the other, it must be used carefully in the interior so as not to get the effect of an unrepaired room.

So let's take a look at a list of the benefits of brick in the interior.:

• First of all, these are its operational properties. Brick is a reliable and durable material that withstands the harsh conditions in the kitchen. Constant moisture, temperature changes, greasy drops - all this will not cause significant harm to your wall. Therefore, brick is often used, including for finishing the apron.
• The brick wall looks very unusual and attracts attention. This finish looks stylish and beautiful, if, of course, you managed to correctly beat it in the interior.
• It - one of the most economical ways to decorate a wall. You do not need additional finishing, and the brick itself is not too expensive.
• The material has excellent heat and sound insulation properties, so there is no need to lay a separate insulating layer.
• In fact, brick is a versatile material ... It is used not only for wall decoration, but also for floors, ceilings, decoration or, an apron. All this allows you to create an original and holistic interior.
• If you wish, you can do without the help of builders - laying brickwork in one row is easy with your own hands even if you have never done a renovation before.
• Brickwork is a great way to zoning a space... Having designed the wall or part of it in this way, you can separate the kitchen area from the dining room, allocate a certain place in the kitchen.
• Brick goes well with all other materials. Wallpaper, tiles, decorative plaster - you are practically unlimited in finishing combinations.

As you can see, brick is an inexpensive material that can be widely used in the interior of the kitchen. In addition, it has excellent performance properties.

What about the downsides? Let's take a look at some of the things to be careful about when working with bricks:

• If, after the list of advantages, you have a desire to decorate all the walls with brickwork, you will have to refuse it. Brick should be used in the interior in a metered dose, even if you are a fan of urbanism. Otherwise, instead of a beautiful and cozy kitchen, you risk getting a strange room that evokes associations with an abandoned construction site.
• Despite its durability, brick requires very careful maintenance. It is characterized by a porous, inhomogeneous structure. This allows grease and dirt to accumulate in the seams. This means that you will have to wipe such a wall regularly - otherwise, you risk quickly ruining the appearance of the wall.
• If you chose red brick to decorate the room, you will not be able to save on lighting - you will need a lot of artificial Sveta... Terracotta bricks practically do not reflect light fluxes, so you will need many times more lamps than when using other materials.
• As already mentioned, it is worth handling the brick carefully. Especially if you decide to choose dark colors of the finishing material - overdo it a little, and the room will seem gloomy, unkempt.

As you can see, the disadvantages can be considered rather arbitrary - if you show common sense, design the lighting system correctly and do not forget about taking care of the brickwork, such a wall will serve you for a long time without losing its appearance and operational properties.

If there is a lot of brick in the interior, you need to work with it very carefully.
With the right approach, brick helps create a very beautiful interior.
Combine brick with less moody interiors to avoid overwhelming space.

How to properly beat a brick in the interior? We hope the advice of our designers will help you with this!

Perhaps you are in luck and live in a house with brick walls. In this case, we recommend not to invent unnecessary problems for yourself - it is quite possible that you do not need to additionally lay decorative bricks.

Sometimes it is enough to remove the finishing finish to get a beautiful brick wall.

It will probably be enough to just gently clean the wall - sand the seams, remove all the dirt.

This way you get a great brick wall at no extra cost. However, this is not always possible. If you are unlucky with a brick wall - the next item is for you.

The main thing is to balance the interior well.
This kitchen looks very distinctive.

At first glance, this advice sounds strange - a brick is a brick. What is defined here? However, in fact, the question is deeper than it might seem at first glance.

A wide variety of materials can be used as bricks in the kitchen.

Most often, a special decorative brick or its imitation is used for the kitchen. Variations are possible here. We recommend that you familiarize yourself with the list of materials in order to make the right choice.

First of all, we do not recommend using wallpaper with a brick print. Yes, such a coating can be of high print quality and be very reliable at first glance. However, the lack of a characteristic structure will completely kill that special charm that is inherent in brick walls.

One of the most popular options is ceramic tiles that imitate brick. Firstly, it is very easy to install. Secondly, the appearance, due to the volumetric texture, fully corresponds to the brickwork. In addition, due to the special glaze, such a tile is ideal for finishing an apron - it is much easier to remove such a coating than natural porous bricks.

Sand-lime bricks are also well suited for the kitchen. The properties of the material provide them with increased resistance to moisture, steam and temperature extremes. Plus, they look very nice and authentic. They are produced in various colors. It can also be painted over - a great way to quickly update your kitchen interior.

Very often, gypsum tiles are used to decorate the kitchen. They can be of different shapes and sizes, so with their help it is easy to recreate any type of brickwork.

Gypsum can be used in different areas of the kitchen

A nice bonus is the thickness of the gypsum blocks. It is only five millimeters long, so plaster is ideal for. The color scheme is also pleasing - from the usual white and terracotta to complex, sometimes the most unexpected colors.

An interesting solution is the use of MDF panels that imitate brickwork. Perhaps this is the fastest way to decorate a brick-like kitchen. Due to the fact that the panels are quite large, the entire wall can be laid in a matter of hours. In addition, it is almost impossible to visually distinguish a fake from a real brickwork. However, remember that in terms of operational properties, the brick significantly exceeds the characteristics of MDF panels.

Even this one. the panel can be installed in a matter of hours

The brick does not have to be porous, like the one that we are used to seeing in outdoor decoration. Now the blocks are treated with a special glaze, which allows you to give the most diverse look to the material.

Bricks can be very different

For example, you can use classic matte bricks - they are great for traditional interiors.

Frosted brick familiar to everyone

However, glossy glazed bricks also look very interesting. In addition, due to their reflective properties, they visually make a small kitchen look larger. A significant bonus, especially when you consider that the brick itself hides the space, makes it smaller and tighter.

An interesting and attractive solution

A fashionable solution for interiors in the industrial loft style is chipped brick. The blocks appear a little broken, have ragged edges and uneven texture. Due to this, the coating looks very voluminous and original. True, you need to work with such material very carefully, otherwise the kitchen will acquire a sloppy, abandoned appearance.

Rough finishes should be compensated for with elegant furniture.

It is believed that brick walls can only be red, terracotta or white. This is fundamentally wrong. Modern possibilities allow you to give brickwork any color - and we are not talking about painting, which gives a chance to change the interior of the kitchen at least every month.

You can find bricks in almost any color

In addition to classic solutions, you can choose almost any color. Brickwork of unexpected tones looks very interesting - blue, pistachio, green, straw.

Bricks painted using the ombre technique look interesting

Alternatively, you can experiment with color combinations and even lay out a kind of brick mosaic. However, keep in mind that such a solution requires quite a lot of financial costs and efforts - nevertheless, it is much easier to arrange an ordinary brick wall. But the result will turn out to be many times more original.

Take the time to find an interesting type of brick

If you want to lay a brick directly next to the oven or use it to decorate an apron, we recommend that you additionally cover it with a thin layer of sanding varnish. This will greatly simplify cleaning - dirt and grease will not penetrate into the pores of the material, which means that the coating will last you longer.

If you want to use a brick near the work surface, it is better to additionally process it.

If you are afraid that such processing will spoil the texture of the brick, do not worry. Modern materials can be applied in one layer, so that they form a thin protective film, at first glance, not too noticeable.

Modern tools allow you to make processing invisible

In addition, no one forces you to choose a catchy glossy finish - you can easily use a matte varnish.

Do you have a small kitchen that you want to make it cozy? A solid color covering all walls and brick in the dining room or work area is a very suitable solution. To make the room even nicer, we recommend sticking to one color scheme.

Nice solid color solution

So the brickwork will stand out only with a volumetric texture. Such a move will add coziness to the room, but the brick will not draw attention to itself - it is better not to use too catchy techniques for a small kitchen.

This combination looks very impressive.

The brick is not very reflective. Therefore, we recommend placing the brick wall in front of the window - this way natural light will smooth out this effect.

A brick kitchen requires a lot of light

In addition, it is very important to properly highlight the prominent wall. Use several lamps at once - this will help to emphasize the beauty of the brick.

Luminaires should fit into the interior, complement it
Additional lighting won't hurt

Tip 8. Caring for rough brick is an important task

If you decide not to cover the brickwork with glaze or paint, you will have to monitor it very carefully in the kitchen. This is especially true for bricks laid in the area of ​​the slab or apron.

This apron looks beautiful, but requires special care.

Any greasy stain is dangerous - it can be absorbed into the porous structure and noticeably change the color of the material.

Therefore, it is best to keep some kind of grease solvent in the kitchen - as soon as the stain hits the surface, gently remove it.

It is also important to remove water that has got on the brick in time. It tolerates air humidity and steam well, however, from prolonged contact with liquid, whitish stains may appear on the material.

Untreated brick should be wiped regularly

Why did we put it at the very end of the article? We have already mentioned that with the right approach, brickwork can fit into almost any interior.

Classic set with a brick wall

However, there are still styles where the use of bricks is much preferred over others.

First of all, it is of course. Along with concrete, brickwork is recommended for use in such interiors.

Great example of an urban loft Cozy country kitchen

White brick is practically a must-have for Scandinavian style. Such a wall fits perfectly into the concept and makes the interior light and spacious.

Scandinavian cuisine cannot be imagined without white brick

For other types of interiors, brick can be used, but this should be done carefully. Choose colors that match the design concept of the style, make sure that this material does not conflict with others. It is difficult to imagine a textured "battered" brick wall in the Victorian style. But the elegant masonry under the bronze is quite appropriate there.

American style kitchen with brick wall

Use common sense and stylistic rules and you will succeed.

Brick in the interior of the kitchen: 30 real photo examples

In order to clearly show how a winning material a brick can be, we have compiled a selection of photographs. Brickwork in kitchens in a variety of styles - we are sure you will love it!

Modern trends in interior decoration are more and more inclined towards non-standard solutions, in particular, the use of unusual materials.White brick in the interiorwill personify order and cleanliness, and will also create a refined accent. This type of decoration can exist in rooms of any functional accessory. In our article we will look at the features that, as well as ways of its design.

White brick in the interior: design and imitation methods

The easiest way to do this is in a new building, where there is no interior decoration. In this casewhite brick in the interiorwill look the most realistic. For finishing, you only need to treat the surface with special agents and paint. At the same time, it is not necessary to clean or remove irregularities and minor flaws in the masonry - with them the design will look much more natural.

If the walls have already undergone finishing work more than once, or they are constructed of concrete or drywall, you will have to choose one of the most convenient imitation options in order towhite brick wall in the interiorlooked as natural as possible. Before this, it will be necessary to remove all signs of the former finish and also treat the walls with paint solutions to prevent the occurrence of dampness of the walls, fungus and other troubles.

White decorative brick in the interior

For intricate interior decoration , resort to the use of silicate bricks. Photos of decorations where it is usedwhite decorative brick in the interiorprovided in our article. Based on them, we can say that it has a rather peculiar appearance that attracts with its attractiveness. In addition, it possesses such qualities as moisture resistance, strength, excellent sound insulation and, importantly, environmental safety.

In addition to wall decoration, this material can be used for the construction of partitions, fireplace cladding, decoration of columns, arches. In order for the surface to have the most attractive appearance, it can be varnished.

A good photo example of this design can be a loft-style living room, where wall of white bricks in the interior(with bookshelves) focuses on this direction as well as possible.

White brick wall in the interior: imitation using tiles

In order to make a realistic brick wall, you can apply the tiling technique. This could be, for example,white brick wall in the kitchenor in the bathroom. For these premises, it is most rational to use ceramic tiles, which are most consistent with their quality characteristics. There are two types of tiles - in the form of individual bricks and a block of several rows. With its help, you can decorate not only a wall, but also a kitchen apron, fireplace cladding and other architectural forms. If you decide to recreatewhite brick in the interiorwith the help of ceramic tiles on your own, here it is worth considering one nuance: the gaps between its individual elements should be slightly larger than with ordinary laying for greater naturalness.

The easiest way to display brickwork is to pick upwallpaper under white brick in the interior... A big plus in the direction of this type of finish lies in the fact that it can be done independently, without the help of specialists, which will also save some way. Another indisputable advantage is that the wall surface on which the wallpaper will be glued does not require thorough cleaning and leveling. On the contrary, small irregularities will play a positive role.

White brick wall in the interior, can be pasted over with wallpaper with different styles of brickwork, which is most suitable for the design of the room and at the same time will always look "warm" and original.

White brick wall in the interior: choosing a design style

Today,white brick in the interiorliving quarters as shown in Photo , can be found when decorating in styles such as modern minimalism, high-tech, modern. Design of premises in village and x Provence and Country styles also welcomes the design of individual walls in this way.White brick wall in the interiordecorated in a Scandinavian style will look light and natural, especially since the main attributes of this style are purity and elegance. This type of finish can often be found in the creation of Gothic interiors. Various interior design by professional designers can be viewed in our photo selection.

White brick wall in the interioris a must-have element in the loft style. Let's take a look at the photo, how it is decorated by professional designers using photo wallpapers that create a volumetric realistic look in the living room. The interior will be filled with coziness and warmth if one of the walls with a built-in fireplace is faced with decorative bricks, as shown in the next photo.White brick in the interior of the living roomsmall size can make the space somewhat heavier. In order to soften this effect, you can add details to the interior such as photo frames on the walls, curtains, put a soft carpet on the floor, and cover the sofa with a blanket. Beige furniture will go well with white walls.

White brick wall in the interiorthe living room can become an accent element used in space zoning.

White brick wall in the kitchen

The kitchen space can be completely decorated with white brick, or you can choose one wall for it, for example, near the dining table.White brick in the interior(Photo can be found in our th article ) is able to expand the kitchen space, make it lighter and more attractive. An original and practical solution would be to decorate the apron with tiles that imitate brickwork. It will give a clean, neat look to the work surface, and, at the same time, it is quite easy to wash it.White brick in the interior of the kitchenwill be perfectly combined with any textures and shades: wooden furniture, metal appliances, fabric curtains, etc.

An entrance hall is a room that requires a particularly painstaking approach to design, since it is the first to meet anyone who enters the house.White brick in the interior of the hallwaywill be able to visually expand the space, which is important for small rooms. This design technique began to be used by designers quite recently, but, as we see in the photo, it looks very impressive.White brick in the interiorcan focus on one of the walls of the hallway or be placed over the entire wall surface. To revive such an interior, experienced designers use the technique of pasting one of the walls with 3D photo wallpaper (the image of cities with small streets is especially relevant), as shown in the photo. Colorful lamps, flowerpots with plants, original paintings and other outstanding elements will perfectly complement the interior.

White brick masonry or imitation in combination with textiles can help create a calm romantic atmosphere in the bedroom. Quite often, they decorate the wall at the head of the bed with it, complementing it with paintings, as shown in the photo, with original lamps and other decorative elements.White brick wall in the interior of the bedroomit will look quite impressive if you choose bright textiles and contrasting furniture correctly.

In most cases, it will be appropriatewallpaper under white brick in the interiorbedrooms (see photo in article ) or the use of decorative bricks. The tile is used much less often, as its mirroring surface will become inappropriate in the room where you want to rest and relax.

Along with the decorative stone,white brick in the interioris gaining more and more popularity and is becoming an indispensable element symbolizing elite housing. It serves, in a way, as an indicator of longevity and safety, while at the same time giving the room a special comfort, cleanliness and warmth.

Decorating the walls inside the apartment, as well as the facade of the house, with decorative bricks or material imitating brickwork has never gone out of fashion. However, unfortunately, it is not always possible to use real brick for interior decoration of housing, since it will make the floor slabs of multi-storey buildings heavier. In addition, it is not so easy to make an ideal masonry "for joining", because this requires at least a minimal experience of a bricklayer.

It is much easier to use other interesting ways to achieve the desired result. Imitation of bricks for can be made in different ways and, which is typical, is available for installation by anyone, even a novice finisher.

The main types of brick imitation and technology for working with them

Considering the fact that brickwork has remained popular for decades and is used in the reproduction of various interior styles, manufacturers did not miss this moment and developed several types of material that can replace natural brick.

Such finishes are made in different forms - it can be flexible or rigid tiles, having the size of the end side of a brick, or large wall panels that cover an entire section of the wall at once, made of polyvinyl chloride (PVC), MDF or glass fiber cement.

Flexible brick-like tiles

Flexible tiles imitating brickwork are great for interior and exterior wall decoration. This modern material is not only decorative, but also a protective coating for surfaces and has a number of positive qualities - this includes resistance to external weathering, impact resistance, vapor permeability, inertness to microorganisms, as well as to ultraviolet radiation, and, of course, aesthetic appearance and a fairly simple process of processing and installation.

"Flexible brick" is easily mounted not only on straight, flat surfaces, but also perfectly bends around the outer and inner corners of the premises.

A similar material is used for wall decoration inside apartments and houses, in particular, premises such as hallways, corridors, kitchens, living rooms, loggias. It is also suitable for external, facade walls. It is very convenient to use such tiles for facing columns, fireplaces, small architectural forms, as well as in any areas where such a design is intended. Regardless of the complexity of the surface configuration.

The tile can be used to finish the entire wall completely or be fixed to its individual sections. Since the material has many colors, it is possible to make the finish in a single color or use tiles of different shades, harmoniously combining them with each other.

Installation of "flexible brick"

Installation of flexible tiles does not require complex electrical tools. It will only be necessary to prepare:

- even spatula 120 ÷ 150 mm wide - for mixing and applying glue;

- notched trowel with a comb 4 mm high and 150 ÷ ​​200 mm wide;

- building level 1000 ÷ 1500 mm long;

- a ruler with a length of 1000 ÷ 1500 mm;

- marking colored cord for striking lines;

- a simple pencil;

- powerful scissors;

- a brush 12 mm wide for leveling the mortar in the tile joints.

Materials other than tiles will require a wall primer and a special

For installation, a dry building mixture can be used - ordinary tile adhesive, but it is more convenient to use a ready-to-use composition packaged in plastic buckets. In any case, when purchasing a tile, you should immediately consult with the seller about the glue suitable for a particular material.

In order for the masonry to be even and neat, the wall must be tidied up before starting installation by cleaning and leveling its surface. After the leveling solution has dried, the wall must be primed with an antiseptic compound, which will give the materials higher adhesion and prevent mold from appearing under the cladding in the future. When the primer is dry, you can proceed to the installation of the tiles.

In addition, it is necessary to take into account the fact that the installation work must be carried out at a temperature of at least +5 degrees, otherwise the adhesion between the materials will be insufficient, and the tile may subsequently begin to peel off the wall surface.

Imitation brick prices

imitation brick

• The first step is to draw the wall surface into flat areas, along which glue will be applied and the tiles will be fixed. If the entire wall is completely revetted, then it is imperative to beat off the upper and lower bounding lines.
• The glue is not applied to the entire surface, but to separate lined areas of about 1000 × 500 mm. The layer of glue should be about 2 ÷ 3 mm - it is applied with an even trowel, and then spread over the entire area to be veneered with a notched trowel so that the grooves of the same height are obtained.

• The tile is glued in order, and if the first of the rows starts with a whole tile, then the second - from half or one third of the "brick", depending on the desired location of the masonry seams.

It is quite simple to divide the "flexible brick" into parts at any angle, without using any power tools: it is marked and cut along the line with ordinary scissors.

• The seams between the rows can have different thicknesses - this parameter will depend on the preference of the master, but usually the gap is left at 10 ÷ 12 mm. The selected size of the joints is taken into account immediately when marking the wall into zones for installation.

• "Flexible brick" easily bends around ledges formed at any angle, as well as interior corners or rounded walls, if any on the surface to be finished.

• When the intended surface area is decorated with tiles, you need to immediately level the solution in the horizontal and vertical joints, otherwise the glue will set, and it will not work out neatly. Smoothing the mortar is carried out using a relatively thin brush of medium hardness, slightly moistened with water.

The fact that flexible tiles do not need to additionally purchase grout for joints can also be safely called an advantage of the material, since you do not have to make extra costs.

Video: flexible cladding tiles with excellent clinker imitation

Rigid brick-like facing tiles

Clinker tiles

Clinker tiles are not used for interior wall cladding as often as other types of material that imitate brick, since they have a fairly high price. It is more often purchased for facades, given its highest performance characteristics. Nevertheless, it can be used for interior decoration and it, especially if a stove or fireplace is to be faced.

It is made from natural highly plastic clays, without the use of artificial colors and plasticizers. Raw materials are pressed and fired at high temperatures, reaching + 1150 ÷ ​​1200 degrees. Thanks to this, clinker tiles are an environmentally friendly material with unsurpassed natural qualities of durability and reliability, which are multiplied during the production process.

Such a finishing material is excellent for both interior and facade claddings. It has a very low moisture absorption coefficient, high frost resistance and wear resistance, inertness to temperature extremes and to almost any chemical attack.

The decorativeness of clinker tiles is not inferior to its physical and technical characteristics, since the variety of design options allows you to choose a material for every taste and style of the interior of the premises or the facade of the building. The finish can have a rough, glazed or natural, untreated surface. Tiles of different sizes and shapes are on sale, and this factor also allows you to bring to life the most daring design ideas.

Installation of brick-like facing tiles

As mentioned above, all tiles with a certain stiffness are mounted on the wall in about the same way. For work, you will need the same tools as for "flexible brick", and besides, for cutting this material, you will need to prepare a hand-held circular saw or a grinding machine with a disc for a stone.

The work on laying cladding from this type of material is more complicated, since the finish already has a significant weight, and after installation it requires careful sealing of the joints between the tiles.

The cladding process is carried out in the following order:

• Laying should be done on a prepared, primed and relatively flat wall.
• The marking of the wall surface is carried out in the same way as for the installation of any piece facing material: straight lines are beaten off along the upper and lower levels of the masonry, then, it is recommended that the entire distance between them is calculated and divided horizontally so that the intended number of rows can be accommodated in this area masonry, with the obligatory consideration of the thickness of the seams between them. It is especially important to carry out this process in the event that there is not enough experience in wall cladding - the markings will help to make the masonry perfectly even.

When marking, for each of the seams between the rows, 10 ÷ 12 mm must be taken away.

• Next, a glue mass is prepared, which is selected in accordance with the type of material on the basis of which the finishing tiles are made.

• The laying begins from the bottom row, which is carefully verified by the building level, since the accuracy of the entire wall cladding will depend on its horizontalness. If the first row starts with an integer, then the second and all subsequent even rows with ½ or ⅓ tiles.
• Further, glue is applied to the wall with a spatula in a layer of 3 ÷ 4 mm. After that, the mass is distributed with a notched trowel, which leaves grooves of equal height, ensuring the most uniform distribution of the adhesive when pressing the tile. When laying some heavy types of tiles (the same clinker), it is additionally recommended to apply the glue to the back side of the facing material. Therefore, before starting work, you should definitely study the instructions attached to the package, in which the nuances of installing a particular material are clarified.

• During the installation process, it is necessary to control the evenness of each of the rows to be laid.

• To ensure that the width of the joints between the tiles on the entire surface to be faced is the same, some craftsmen use special calibrating tabs of the same size. They are temporarily installed between the rows, and after the glue mass has set, they are removed and installed again, but already on the upper rows. As such calibrators, you can use a wooden glazing bead or silicone posts.

• For facing the outer corners, special curly elements are used that are able to mask existing chips and make the corners neat and protected.

• Upon completion of the laying and after the glue has completely dried, the joints between the tiles must be securely and accurately repaired using grouts specially designed for this purpose. You can fill the seams in different ways:

- Use ready-made formulations in tubes, using a special pistol.

- Place the mixed grout in a plastic bag, and then cut one of its corners obliquely to the width of the seam and gently squeeze the grout into the gaps between the rows.

Unlike PVC panels, MDF finishing is not recommended for use in rooms with high humidity, but it is perfect for leveling the walls of hallways, corridors, insulated balconies, and living rooms.

Manufacturers also thought over the design of the corners, making special curly elements for this.

Fiberglass panels

Special mention should be made of glass fiber reinforced concrete panels. This facing material is made on the basis of ordinary cement with the addition of glass fiber fibers, which increases the strength of the slabs tenfold. For external finishing, the panels can be additionally reinforced with metal elements, which increase the weight of the structure, but make it resistant to mechanical stress.

Reinforced only with fiberglass, the panels are not particularly intimidating in weight, the dimensions are still compact in thickness. The solution for their manufacture is colored in bulk, so the slabs are not afraid of small chips and abrasion. Some manufacturers in the production of molding sand add colored fiberglass to it, which is somewhat darker or lighter than the main tone, but perfectly harmonizes with it - this gives a very interesting effect. In addition, additional paint application to the surface of finished and assembled products is allowed.

Well suited for interior decoration, but still more often it is used to transform the facade of the walls of a building.

Environmentally friendly slabs do not weigh down the walls, as they are lightweight. They perfectly protect surfaces from moisture and mechanical stress, as well as from the penetration of radio waves into the house, and have a number of other attractive advantages. However, the cost of such facing materials is quite high, so not every owner can afford such a finish.

Installation of brick-like panels on the wall

If the surface of the wall is sufficiently flat, then the panels can be fixed to it without installing the frame structure. Lightweight PVC boards are glued to the cleaned and primed surface using one of the polymer adhesives. For example, liquid nails are good for this.

Finishing panels based on MDF have a much higher weight, therefore, in addition to glue, they are fixed on the wall with dowels in four to five places.

GRC panels can be fixed to a flat wall using cement-based tile adhesive.

In the event that the wall surfaces have significant distortions, they are corrected by fixing the frame structure, consisting of metal guides or a wooden beam, set exactly in the desired plane at the building level. Some manufacturers make special subsystems for their products, fixed on the wall or on an installed frame. In this case, the panels are hung on special elements of the subsystems.

Subsystems can have different designs, therefore, when purchasing cladding plates and attachment systems to them, it is necessary to check the compatibility and the presence of the attached installation instructions.

It is clear that if it is planned to install panels on a subsystem, the frame elements must be located in accordance with the peculiarity of this model.

The simplest type of fastening is possessed by plastic panels made on the principle of siding construction. They have a special perforated mounting plate in the upper part, through the holes of which the plate is fixed on the wall or frame. In this case, horizontal lathing elements are fixed to the wall surface, at a distance of the visible part of the slab.

Facing brick prices

facing brick

The installation of any cladding panels begins from the bottom of the wall, usually from the corner elements.

Homemade options for decorating walls for brickwork

If you want to save money by making an imitation of brickwork on one of the walls of an apartment or house with your own hands, you can use the original techniques developed by folk craftsmen.

Several options are widespread that do not require special costs for the purchase of cladding plates or panels, and also do not create any particular difficulties in installation:

• Independent production of tiles from expanded polystyrene with a thickness of 10 ÷ 12 mm. For this purpose, it is recommended to use an extruded material with a higher performance than regular white foam.
• Creation of a relief of brickwork using a stencil.
• Reproduction of the desired pattern on the wall using masking tape.

Brick-like tiles made of expanded polystyrene

If it is planned to use the process of melting the edges of the foam plastic in the manufacture of tiles, then the work should be carried out in the open air, protecting the respiratory tract with a respirator, since this material is flammable, and releases toxic substances during combustion and melting.

• The first step on the prepared, leveled and primed wall surface, using a ruler, a plumb line, a building level and a simple pencil, marks the "brickwork". The wall is drawn into horizontal stripes and vertical partitions, which determine the size of the brick and the joints between them and the masonry rows.
• The second step is to mark the expanded polystyrene sheet into tiles of the selected size.

• Then the material is cut into individual elements with a clerical knife. The number of such blocks should correspond to the number of bricks required to decorate a specific section of the wall on which the markings were made.

• Further, in order to achieve the most reliable effect of imitation of a brick, you need to work on the resulting tile - this can be done in different ways. Its surface is treated with sandpaper in different or one direction, with a knife or other sharp tool, notches and grooves are made on it. You can also use a heated soldering iron for these purposes.

Another option is to melt the edges and outside of the tile using a regular lighter or burner. In this case, the front surface takes on a soft smooth shape.

• After painting the tiles in the selected color, its relief will be more pronounced. The paint can be applied before the installation of the tiles or after the wall cladding is completely finished.

Staining can be done with a brush or by spraying the dye composition from a balloon. The main thing is that the paint does not cause dissolution or softening of expanded polystyrene - it is better not to experiment with compositions on an organic basis, preferring water-soluble ones.

• Laying of foam tiles is carried out according to wall markings using liquid nails glue, which is applied to the back surface with three points 3-4 mm thick.
• The final stage will be the design of the joints between the bricks and rows.
• It should be noted that if the design does not provide for the highlighting of the tile joints in a different color, then the coloring of the cladding can be done after the grout solution has dried.

Imitation of brickwork using a stencil

In order to make an imitation of brickwork using a stencil, you will need a cement-based mortar. It is best to purchase it in the form of a ready-made dry mortar for plastering work, since it already has all the necessary additives that make it plastic and easy to work with.

The mortar can be made independently from two materials - a plaster and adhesive cement mixture, which are taken in proportions of 1: 1. To increase the plasticity of the solution, add a tablespoon of liquid detergent per 5 kg of the finished mixture.

• The wall must be well cleaned, primed and dried.
• The solution can be applied to its surface with a wide spatula or simply by hand with a rubber glove. The thickness of the applied layer should be equal to the thickness of the stencil strips. This moment will depend on what kind of surface the brick should have - smooth or rough.
• Further, so that the stencil does not have "stickiness" with the layer of the applied solution and is easily separated from it, it should be moistened with water - this can be done with a sponge or damp cloth. If the stencil is made of rubber, then you can simply dip it into a bowl of water, but in this case you need to wait for its excess to drain, otherwise excess moisture can ruin the whole work.
• After that, the stencil is pressed against the applied fresh plaster and gently pressed, so that the relief of the brickwork remains on it.
• Further, the stencil is removed and applied further, next to the newly squeezed relief. Here you need to try and attach it so that the masonry is even, and the skew of its horizontal seams does not work out.
• When the relief is applied to the entire surface, it is left to dry completely.
• After drying, the wall should be completely covered with one color - usually light shades are chosen for this, since it will be easiest to apply any color on them, and also highlight with a dark shade or leave all the masonry seams light.

Painting imitation brickwork is already a creative process, so you can indulge in various fantasies. In this case, of course, it must be borne in mind that the chosen color will set the mood for the entire interior of the room.

Relief of brickwork using plaster and masking tape

For this technology of reproducing imitation of brickwork on the wall, the above-mentioned composition of cement plaster and masking tape will be required. Some craftsmen even use electrical tape, however, it sticks to the wall worse, and high-quality masking tape has excellent adhesion to any surface.

The width of the tape should be no more than 14 mm, and if it was not possible to find an adhesive tape of this width, then you will have to buy a wider one and carefully cut it in half right in the skein. If its edges are not perfectly even, this is not at all scary, since this factor will not affect the accuracy of the relief, but rather even play into your hands.

• In the first step, the prepared surface of the wall to be faced is drawn under the brickwork.

• Further, along all the outlined lines, masking tape is glued to the wall. It should be fixed so that the edges of the horizontal pieces of adhesive tape extend beyond the edges of the surface to be formed, and no mortar should be applied to them, and the vertical pieces should be well glued to the horizontal ones, always on top of them.
• Then, on the surface of the wall, on top of the glued lattice made of adhesive tape, using a wide spatula, a solution is applied, with a layer thickness of 5 ÷ 6 mm - the height of the relief will depend on this parameter. Do not apply too thick a layer, otherwise you will have to cover the seams with grout.
• After applying the solution completely to the entire wall, you can walk on it with your hand in a damp rubber glove to create the texture of the surface. If you plan to leave the surface of the "bricks" flat, then you should not touch the layer of mortar.

• The most interesting stage in this method of imitation of brickwork is the removal of masking tape, since after this operation the relief of the wall will be immediately visible. Several strips of scotch tape are picked up from one of the free sides and begin to gently peel off from the wall, and as a result, in place of the peeled off tape, seams are formed between the "brick tiles". Having removed the tape from the entire surface, the wall must be left to dry completely.

• It is recommended to dry the wall before painting - this operation will make the surface more pliable for the next stage - painting, since the paint will lie flat on the surface and will not be absorbed into the plaster layer. What shades to choose for the wall - it already depends on the preference of the master.

Video: How to simulate brickwork using plaster and masking tape

From all of the above, we can conclude that the construction market has an overabundance of various materials that ideally imitate brickwork or other stone surfaces. Sometimes the quality of the imitation is such that when finished, it is impossible to distinguish it from a real brick in texture and color. Well, if the finished tiles or panels do not fit into the framework of the family budget in any way, then it is quite possible to use one of the more economical methods and decorate the wall using affordable materials.