Which front siding is better. Types of siding for the house - which one is better to choose

Last years it has become very popular to decorate their homes with siding. This material is able to perfectly cope with the protection of the outer surface of the walls from negative external influences. Sheathing the house with siding with insulation allows you to make housing not only beautiful, but also the most comfortable. However, you need to know which siding is best for house cladding.

Currently, in specialized stores there is a huge selection of this material, the types of which differ in design, colors, composition and much more. Practice shows that siding is currently considered the most durable cladding material. Such material is able to serve for about 30 years, or even longer, if you follow the rules of installation and operation. However, before starting this work, it is necessary to decide What is the best siding for your home?.

As a rule, this material is made on the basis of high-quality polyvinyl chloride using extrusion technology. The panels are distinguished by a special structure, which implies the presence of two layers at once, while the inner one is characterized by impact resistance. The outer layer is characterized by resistance to pigment fading. If we compare vinyl siding with plaster and other finishing materials, which, by the way, are considered very expensive, there are some advantages that distinguish it. . These benefits include:

Ease of installation.
Burnout resistance.
No need for periodic repainting.

In addition, vinyl siding is quite unpretentious in operation.. Many craftsmen noted that such cladding of houses can be installed on any frame building by literally one person. This is also due to the fact that each panel has a very small specific gravity. It will be quite difficult to install facade panels incorrectly, as manufacturers include instructions in the kit, and fasteners are supplied with the products, so there is no need to select them additionally.

Vinyl siding has gained its popularity due to the fact that during operation there is no need to paint it. This is the main advantage of PVC sheets over wooden counterparts. Manufacturers guarantee that for ten years the decoration of the house will keep its original attractiveness. appearance. Panels need to be replaced only after at least 25 years. However, it is worth paying attention to the fact that the replacement period will depend on the conditions operation and correct installation.

If you want to choose a good siding for lining your house, then you should pay attention to vinyl varieties that practically do not fade in the sun during the entire time of their operation. You can install such a finish even in areas with an unfavorable climate. These panels will be resistant to temperatures down to -50 degrees Celsius. High air temperature, wind and precipitation are not terrible for siding. Many buyers noted that such products are absolutely not susceptible to infection by fungi and mold. Finishing is not afraid of exposure to various insects, does not rust or rot.

Owners of detached houses say that an important feature of PVC is the inability to conduct electricity. So if you want to save more, opt for vinyl siding. The installation costs of these panels will be much less when compared with lining the facade, which requires painting literally every year.

Choosing facade panels for cladding, you should consider varieties of acrylic, which are made using polymers of the same name. This finish is very similar in its characteristics to the one described above, however, acrylic is made using a completely different technology. In addition, acrylic has absorbed all the advantages of a vinyl counterpart, thanks to which it has gained many other advantages. People at the same time argue that the main advantage is less susceptibility to ultraviolet radiation.

If you still can't decide which, which siding for home decoration to choose, then you should consider the option of acrylic cladding. Acrylic will not lose strength during the entire period of its operation. In addition, the attachment points will not become points of weakness.

It is also possible to apply such a cladding with more high temperatures ah, which in some regions can rise to 50 degrees above zero. The maximum temperature that acrylic panels can withstand is 85 degrees above zero. front part vinyl siding resistant to various chemical solvents. This suggests that it is possible to clean the panels with synthetic detergents.

Acrylic practically does not burn, and during direct exposure to fire, it emits only the smallest amount of harmful elements and substances for the respiratory system of the human body. If the issue of price is important to you during the purchase, you should know that acrylic siding will cost more to finish than vinyl cladding. It should also be borne in mind that the life of the acrylic cladding will be much longer: it is about 50 years. Most homeowners claim that the net benefit is clear.

Metal panels for decoration

Choosing siding for your home, one should also consider metal cladding capable of withstanding very high temperatures. Buyers claim that the cost of this cladding is much higher when compared with the aforementioned panels. By visiting a specialized store, you can finally understand that the cost will depend on the polymer coating and the thickness of the steel. At the same time, the polymer coating protects the panels from the effects of various atmospheric precipitation.

Thanks to the metal cladding of the house, you can get a facade that will be distinguished by its durability. The service life of this type of siding reaches several decades.

As a rule, such a coating consists of individual elements that are not subject to deformation. A fairly thick base is well able to withstand various mechanical stresses. The owners of private houses noted that they make a choice in favor of metal products due to their high environmental friendliness, since various chemical reagents are not used in the manufacturing process. In addition, the metal is distinguished by the fact that it is used to produce a finish with a maximum service life, it can also be used in the most aggressive environments. It should be noted that acrylic and vinyl siding will not have such characteristics.

Attention! Installation of siding, which, as a rule, is not too expensive, is carried out quite simply because it is almost impossible to damage it. The manufacturing technology and structure of products are in many ways similar to metal tiles. The difference lies only in the profiling of the sheets, as well as in the dimensions.

Despite the totality of all positive qualities , it is safe to say that vinyl siding, in particular, pastel shades, is the leader in the modern market. For the manufacture of such panels, titanium dioxide is used, the difference of which lies in the color fastness. However, bright colors on such coatings may fade.

To achieve a rich shade, manufacturers add rather expensive stabilizers to their products. This is not reflected in the best way on the cost of the panels. Even though the composition of the ingredients includes special items, the bright colors are exposed to the sun. Given this circumstance, it is recommended to purchase vinyl panels specifically pastel colors.

Metal cladding colors

If we compare vinyl panels with other facade systems, then the advantages in diversity stand out here. colors. The range of metal cladding is so diverse that you can easily choose absolutely any color, from dark to light. At the same time, the brightness of the shade will not affect the final cost of the panels. That is why you can create a truly original facade of your home. Before buying, you need to pay attention to the color scheme of buildings in the neighborhood. If the neighboring houses were created taking into account a certain trend, then you need to decide what will be a priority for you:

own originality.
General harmony.

The calculation of siding for facing your house is considered milestone, because after spending it, you can determine how much material is required in order not to visit a specialized store a second time and not overpay employees for unclaimed finishing. It all depends on how the siding sheets are supposed to be oriented:

vertically.
Horizontally.

In the second case, you need to measure the height of the walls on the house, and then turn your attention to the width of one sheet. The next step involves dividing the first value by 2, after which the resulting number is multiplied by 4. This will be true in the case when the structure is distinguished by a simple architectural solution. Otherwise, the result of the division must be multiplied by the number of walls that are supposed to be finished. The material is taken taking into account a margin of 15%, since it will need to be cut during the installation process.

Exterior cladding of the house with siding can only be done after you become familiar with this technology. Installation involves initial preparation, when old finishing materials are removed from the surface of the house.

Installation of metal panels can be done independently. During their installation, a frame assembly, called a crate, will be required. This system can be made of metal or wood. The second option is cheaper, and also does not require special skills from the master. However, such a frame will not last too long, as it can rot.

You can also choose a vinyl version of the finish. The price of one product is an average of 200 rubles per panel. The technology of the crate will remain the same. The first panel is inserted into the grooves vertical profiles, while it is necessary to bend the middle. Further, the panel is lowered to the old profile, the lock connection is latched. When the lower part is fixed, the top of the sheet can be pressed and fasteners can be installed in the middle of the technological holes.

The cost of siding for a home is usually not the main factor for material selection in all cases. Each person is individually guided by certain principles. Most often, consumers pay attention to quality, aesthetic appearance and environmental friendliness.

People have been asking the question of finishing houses since the beginning of construction as such. Insulation of walls, concealment of communications on them, protection from moisture and heat - external decoration is used for this.

Since the Silicon Age, ancient people have finished their huts on the outside. Then - dense foliage or bark, animal skins. Now a lot of finishing materials have appeared - both cement-based (all kinds of plasters), and hinged ones made of plastic or metal (siding). It is easy to install, non-toxic, versatile in terms of textures and colors, easy to clean, does not fade in the sun and is often cheaper than other types. exterior finish houses.

Questions arise: which manufacturer's siding is best to buy? What will be better? What is more profitable in terms of price / quality ratio? What is the best siding? An article on the topic will help answer the questions posed: “Rating of the TOP 7 best sidings for house cladding!” Reviews, photos, which one to choose - we will talk about this a little lower.

Pros and cons

Ease of installation. The siding is installed on a wooden formwork using self-tapping screws. Installation is simple, you can do it yourself, because there are enough guides and articles on the Internet on this topic.
This is a very durable coating that retains its beautiful appearance for a long time (about 20 years).
Another important plus is ease of maintenance. If necessary, the coating can be washed.
Siding is an environmentally friendly coating, so when exposed to UV rays, it does not emit substances harmful to health.

Vinyl siding is subject to extreme temperature fluctuations. Moisture contained in the material and on it, including easily expands and contracts with perceptible changes in temperature. A drop of more than thirty degrees Celsius is already critical, so it is not advisable to use this type in the northern regions.
The need to prepare the wall. Before installing the panels, attach to the rough surface outer wall wooden formwork (rail system), to which the plastic will be drilled.
The fragility, however, concerns only the budget plastic coating. The plastic itself is designed for ten years of use, after which the top layer begins to degrade and peel off. All this does not apply to metal siding, but after a while the steel still needs to be updated and freshly painted.
Not safe. Chipboard and plastic are flammable and melt. In the event of a fire, it will not help to stop the flame due to its combustibility.

Comparison with analogues

In addition to using steel or vinyl panels, you can finish the facade of the house using:

Plasterers. A budget option. It is difficult to apply, since for plastering the wall it is necessary that it be as smooth and even as possible. Suitable for walls made of brick or Inkerman white stone.
Porcelain stoneware. An expensive solution, but very aesthetically pleasing. Artificially created pressed plates are resistant to temperature fluctuations, keep their color well, and do not crack in the cold. Mounted with facade adhesives on a flat prepared surface.
wild stone. More accessible version previous version. If desired, finishing wild stone can be collected in the forest belt. Its preparation consists in trimming the ugly back in order to form an adjacent plane. Aesthetically, it is quite inexpensive, but laborious.
treesa. One of the oldest cladding solutions. In itself, it is not cheap, it is fire hazardous, wood is afraid of moisture and frost. But it is very beautiful and warm, since the tree easily forms an air cushion between the room and the street, thereby not allowing heat to quickly escape through the walls.
brick. An energy efficient solution, but can be expensive. Beautiful, durable, massive. It is used in areas where their manufacture is available and it is important to insulate the walls with massive cladding.

Types of siding

There are such types:

Chipboard. Glued lining. It is made from wood fibers (development of the cellulose and woodworking industries), pressed under high temperature using binder resins.
Vinyl. The thin plastic based on PVC compounds, from which the panels are smelted, is relatively durable and cheap.
Metal. Stainless steel coating. It is more often used for finishing industrial buildings and premises, workshops and hangars. It is afraid of corrosion, mechanical damage and is able to collapse under its own weight if not installed correctly.
Cement-bonded. Plates made by a press from cement and cellulose fibres. Not afraid of fire, quite flexible, massive. Requires preparation in the form of a crate to which it will be attached. It is expensive and rarely used.

Top 7 siding for home cladding

Our selection includes:

Dolomite Rockvin;
Dolomite Rocky Reef Luxury Coral;
Eskosell Malachite;

Let's get acquainted with each position in more detail.

Simple, but very high quality PVC panel. It is made under a bar, beige color, with longitudinal fastenings. The minimum thickness and smooth surface make installation easy. Perfect for finishing small utility rooms.

Price: from 220 to 244 rubles.

Siding Grand Line America

longitudinal fastener;
3 m span length.

thin (1.1 mm).

Easy-to-install plastic from a foreign manufacturer. Lightweight, durable, not afraid of the sun. Sheathed the extension, everything is fine, no complaints. Cheap and cheerful. I am satisfied and would recommend this cover to you.

Metal, vinyl, acrylic, fiber cement, wood - all these are varieties of siding. Which one to choose for finishing? What is the best siding for your home? It is rather difficult to give a definite answer. It all depends on your budget, needs and desired result. So, let's take a closer look at each type of siding.

metal siding

Metal siding is used for finishing private houses, cafes, shops, warehouses, office space etc. The properties of the finish depend on what metal it is made of.

Steel siding trim rooms that require increased fire resistance, as well as mechanical strength. It is resistant to aggressive environments - alkalis, acids, salts, etc. However, such panels are quite heavy and exert an increased load on the foundation and bearing structures.

Aluminum siding trim commercial premises, less often - residential buildings. Compared to steel, aluminum panels are lighter, but at the same time less elastic. Under mechanical stress, they can be deformed, after which they cannot be restored.

The structure of metal siding includes several mandatory layers:

base (metal sheet);
priming;
polymer coating;
protective covering.

As a polymer coating can be used:

polyester
plastisol
pural
other.

The geometric parameters of metal siding may vary from manufacturer to manufacturer. But, as a rule, their length is from 2 to 6 m, and the thickness is from 0.4 to 1 mm. During the installation process, it is worth considering the rather large weight of the panels.

Benefits of metal siding:

resistance to temperature extremes;
strength;
fire safety;
resistance to mold, fungi and pests.

Disadvantages of metal siding:

low noise isolation (this can cause a rumble during rain);
susceptibility to corrosion in places where the protective polymer layer is broken.

A specific disadvantage of steel siding is its impressive weight. Aluminum panels are lighter, but also less durable. They are easily deformed.

wood siding

For the first time, siding began to be produced in the USA and it was from wood. Today it is used less and less - he lost the palm to the more practical PVC siding.

Wooden panels can be mounted overlapping or end to end. So, they are of three types: block house, shipboard and false timber. As a rule, for its manufacture, hardwoods are used that are resistant to humidity and temperature extremes: larch or hardwoods of exotic trees. In addition, heat-treated wood can be used - it can be pine, ash, etc.

Recently, as a wooden siding is increasingly used composite material- pressed wood fibers mixed with polymeric substances. This composition makes wood siding more resistant to weather conditions.

Benefits of wood siding:

environmental friendliness;
a special texture that gives the panels an attractive appearance;
high heat and noise insulation.

However, you have to pay for beauty. Wood requires careful and regular maintenance. Therefore, this type of finish has many disadvantages.

Disadvantages of wood siding:

fire hazard;
the need for care (treatment with protective primers and painting);
high cost;
high risk of infection by fungi, mold and pests;
low resistance to moisture and temperature changes.

Wooden siding should not be installed in rainy weather and at low temperatures.

Almost all types of siding on the market imitate wood siding, but at the same time have better performance characteristics. Wooden panels are installed less and less.

fiber cement siding

This is one of the most modern species siding. It is produced from a mixture of high quality cement and cellulose fibers with the addition of sand, water and special additives. The surface of such panels can be smooth or embossed. The thickness is somewhat greater than that of metal or vinyl siding - up to 12 mm.

The weight of fiber cement siding is impressive, so before installing it, you should consult with experts - whether the foundation and supporting structures will withstand, what kind of fastening system is needed. And for installation, you will have to turn to the services of a construction team.

Benefits of fiber cement siding:

does not support combustion;
does not rot and is not susceptible to mold infection;
does not need special care;
resistance to low and high temperatures, as well as their differences;
moisture resistance;
strength.

Disadvantages of fiber cement siding:

significant weight of the panels;
high cost;
installation complexity.

Vinyl siding for home decoration

more resistant to UV radiation
can be operated at temperatures up to +80°С
has reduced smoke generation under the influence of an open source of fire

Acrylic siding practically does not fade in the sun. Therefore, it is an ideal material for facades. dark colors. On the other hand, it is also more expensive than vinyl.

Advantages of acrylic siding:

UV resistance
wide choose dark shades panels
light weight
moisture resistance
resistance to fungal infection and corrosion
does not support combustion
resistance to temperature extremes and aggressive environment

Unlike metal panels, acrylic siding can be used on the sea coast, where the salt content in the air is high.

Disadvantages of acrylic siding:

less strength than metal and wood panels
higher price than vinyl

We summarize - types of siding for home decoration

It is impossible to unambiguously answer which siding is better than others. In different cases, for different purposes, the answer will be different. Wood panels are good for their naturalness, but performance characteristics inferior to plastic or metal imitation. And if metal siding it makes sense to install for industrial and commercial facilities, then vinyl or acrylic siding is more suitable for the facades of residential buildings. Moreover, if the facade is light shades, you can save a little and choose vinyl panels. And for those who prefer bright and saturated colors, acrylic siding is more suitable.

Siding has been in high demand for many years.

This is due to the high quality, reliability, excellent external characteristics of the material.

Initially, siding panels were made only from wood, but the high cost of the component made it necessary to look for alternatives.

Over time, finishing sheets made of polyvinyl chloride, ceramics, metal, cement composition appeared.

Siding - facing material, is a separate plate fastened with special latches. The kit also includes a set of fittings that masks the docking points and generally facilitates installation work.

The main advantages of finishing:

simple and fast installation;
high strength and performance qualities;
along with the sheathing, you can take care of the insulation of the walls;
a huge variety of models and colors;
excellent external characteristics;
care does not require special skills.

Considering the disadvantages, it is necessary to mention the high prices for certain types of siding.. We will talk about the specific disadvantages for each type below.

Vinyl

Single-layer vinyl siding panels are produced by mono-extrusion from polyvinyl chloride and a small amount of impurities that are necessary to stabilize the main component. The output is classic cast sheets.

Double-layer profile - a more advanced material. Plastic is additionally covered protective layer. The manufacturing method involves the use of a co-extruder, due to which the individual layers are combined at the molecular level.

NOTE!

The cost and color of the cladding are directly related, the richer the shade, the more expensive material. The nuance is due to the need to add components that resist ultraviolet radiation.

Advantages:

affordable cost;
minor deformations that occurred during operation can be restored independently;
plastic is one of the lightest building materials;
ease and speed of installation;
vinyl is unpretentious in care;
a wide variety of shades.

Flaws:

needs additional thermal insulation;
direct mechanical impact can cause significant damage to the finish;
short-lived compared to other types of siding;
replacing one sheet requires dismantling the entire cladding of the house;
combustibility of the material, the release of toxic substances during combustion.

Metal

metal siding is a type-setting profile consisting of several layers:

basic - steel sheet;
zinc coating;
anti-corrosion coating;
primer;
back surface - varnish or paint;
front surface - polymer coating.

pros:

high strength characteristics;
resistance to temperature changes and precipitation, if the protective layer is not damaged;
long service life;
unpretentiousness in care;
resistance to decay and insect pests;
a sufficient variety of forms;
aesthetics.

Minuses:

high price;
high weight, and therefore the complexity of installation;
complex repair in case of dents;
low thermal insulation.

Acrylic

Acrylic panels are a modern solution for home decoration. Key characteristics of the cladding: shape, color, size.

Siding comes in three types:

ship timber;
block house;
vertical siding.

The color scheme is diverse, you can choose the following tones:

pastel, soft;
saturated, bright;
imitating natural wood.

Connecting and starting strips are initially produced white color. At the request of the customer, structural elements can be made in color.

Advantages:

high strength;
no deformation at high temperatures up to 80°C;
environmental friendliness of the material;
resistance to mechanical stress;
fire resistance;
the initial color does not change under the influence of ultraviolet;
does not lend itself to decay under the influence of aggressive environments;
simple installation;
lightness of the material;
unpretentiousness in care.

The main disadvantage of acrylic siding is its high price.. In all other respects, the lining is practically invulnerable, if no mistakes were made during the production of the material and during the installation work.

fiber cement

A relatively new solution for cladding a house, but has already won a lot of sympathy. Main components fiber cement panels – cement, sand, natural or synthetic fibers. The front side of the finish is sheathed with a texture that imitates stone or natural wood.

Advantages:

long service life;
environmental friendliness of the material;
amenable to self-cleaning during precipitation;
fire resistance.

Flaws:

the fragility of the material, which complicates the installation work and transportation;
tends to absorb moisture, which can lead to deformation;
weight forces you to take care of a solid crate.

Ceramic

Ceramic siding is a relatively new type of cladding material. quality characteristics similar to ceramic tiles.

Texture imitates:

tree species;
stone or brickwork;
rock relief;
plaster.

Profiles are made of clay and silicate fibrous materials. To begin with, the mass is hardened, then several layers of dyes are applied to the surface.

pros:

resistance to temperature changes, precipitation, sunlight;
high soundproofing and heat-insulating qualities;
not amenable to fading;
the casing is sealed, there is no possibility of penetration of water and air under the lining;
durability;
environmental friendliness;
fire resistance;
a large assortment.

Minuses:

the complexity of the installation and repair work;
fragility of the finish;
great weight.

Wood

It was with him that the history of a new finishing material began in the middle of the last century in North America. Wooden panels create coziness and a wonderful atmosphere inside the building, from the outside the building looks presentable and testifies to the well-being of the owners.

NOTE!

Despite all the advantages of the material, the popularity of wood siding is falling every year. This nuance is associated with large cash costs for annual maintenance.

Plus, the manufacturing technology of panels has changed, today they are made from wood waste by pressing.

Advantages:

presentable appearance of the cladding;
environmental friendliness of the material;
high energy efficiency;
zero thermal conductivity;
high vapor permeability.

Flaws:

susceptible to decay;
afraid of insects, mold, fire;
needs special, expensive care;
has low strength properties.

Under the stone

The main feature of this finish is that even close up it is difficult to distinguish it from natural stone. Available in rectangular panels. Each sheet at the edges is equipped with locks and mounting holes for tight docking.

During the installation work, the connecting elements are closed with adjacent profiles, resulting in a solid web.

Advantages:

resistant to temperature changes;
does not rot;
perfectly resists mold, insects, sun rays, precipitation;
the material is light;
does not change the original shade for a long time;
durable;
unpretentious in care.

Flaws:

poor color variety;
high consumption during installation work.

What siding is best for a private house

In the matter of choosing a siding, in no case should you be guided solely by the pricing policy, if you want the cladding to serve uninterruptedly for a long time.

Also, speaking about the cladding of the facade, you subconsciously want to live in a house that has presentable external data that makes you turn the enviable gaze of people passing by.

It will not be superfluous to consider a comparative table of popular finishes.

Comparative analysis of the main characteristics of popular types of siding

Specifications	Vinyl siding	wood siding	fiber cement siding
Compound	PVC	wood waste	Water, sand, cement, synthetic and natural fibers
Smell	smells like plastic	smells like wood	without smell
Claimed period of use	about 30 years old	about 30 years old	about 30 years old
Color	big variety	the color of the wood itself or the color of the paint used	big variety
fire resistance	can be melted with the release of toxic substances	very combustible	refers to combustible materials (G1 group)
Environmental friendliness	not environmentally friendly, toxicity depends on the components included in the composition	eco-friendly, does not contain toxic substances	eco-friendly, does not contain toxic substances
impact resistance		refers to durable materials	deformed as a result of strong direct impact
Acceptable temperature range	does not tolerate sudden temperature changes	from -50°C to +50°С	from -60°C to +80°С
Moisture absorption, %	the material is vapor-tight	minimum	to 10
Gives shrinkage	no shrinkage	as a result of shrinkage, gaps are formed between adjacent sheets	no shrinkage
Resistant to fungus and mold	completely stable	needs periodic treatments with special means	completely stable
The need for painting	only in places of damage	if desired	depending on the manufacturer
When not to use	can not be used in baths, saunas, near fireplaces	you can always	you can always
In what cases does it apply	not recommended for interior decoration due to the toxicity of the material	used for both interior and exterior decoration	practically not used for interior decoration

Sometimes you need to go deeper into the analysis:

for example, PVC panels, which have high resilience, resist point contacts better than high-strength metal siding;
you should always be guided by the human factor - you should not use expensive cladding in unprotected areas;
before choosing the type of siding, it is necessary to assess the climatic conditions in which you live, while it is important to take into account what kind of weather is predicted in a few months.

Useful video

In this video you will learn which siding is better:

Conclusion

So why do we need siding? Facing panels are used to protect the house from adverse climatic conditions, from ultraviolet radiation, from insects and mold, at the same time, the sheathing is responsible for the external characteristics of the structure. In the case of industrial buildings, the finishing material must protect against aggressive environments and fire.

Recently, finishing the house with siding has become very popular. This material perfectly copes with the protection of the outer surface of the walls from external negative influences. Sheathing the house with siding with insulation will make your home not only beautiful, but also more comfortable. With the help of these panels, it is possible to hide the imperfections of the lining, ensuring the removal of condensate along the internal surfaces of the products.

When visiting the store, you can choose from a wide range of colors and designs. As practice shows, siding today is the most durable facing material, which is ready to last approximately 30 years or more with proper installation and operation. However, before starting work, it is important to decide which siding is best for cladding a house. Reviews may help you understand this.

Vinyl Siding Reviews

This material is made from high-quality polyvinyl chloride using extrusion technology. The panels have a special structure, which provides for the presence of two layers, the inner one is characterized by impact resistance, while the outer one is resistant to pigment fading. When manufacturers compare vinyl siding to stucco and natural finishes, which are quite expensive, they highlight certain benefits. Among them - ease of installation, no need for periodic repainting, as well as resistance to fading. Among other things, vinyl siding is characterized by unpretentiousness in operation.

Home craftsmen note that this cladding can be installed on any frame buildings by one person. This is also due to the fact that each panel has a small specific gravity. It will be quite difficult to install facade panels incorrectly, as the manufacturer puts instructions in the kit, and fasteners are supplied with the products, so you do not have to choose it additionally. Buyers note that vinyl siding is so popular also for the reason that it does not provide for the need to apply paint during operation, this is the advantage of PVC sheets over wood ones. The manufacturer guarantees that the finish will keep its original appearance for ten years. But the replacement of panels may be required only after 25 years. However, this period will depend on the correct installation and operating conditions.

Reviews of the main characteristics of vinyl siding

If you want to choose a good siding for house cladding, then you can pay attention to its vinyl variety, which almost does not fade during the entire period of operation. You can install such a finish even in areas with a difficult climate, it remains resistant to destruction up to -50 degrees. High temperatures are also not terrible for the panels, like precipitation and wind. Buyers claim that these products are completely unaffected by mold and fungi. The finish is not afraid of the effects of insects, it does not rot or rust.

According to the owners of detached houses, a very important feature of PVC is that it does not conduct electricity. If you want to save money, then you should choose vinyl siding, the installation costs of which will turn out to be less compared to finishing the facade with clapboard, which requires repainting every year.

Acrylic siding reviews

When choosing facade panels, you should consider their acrylic variety, which is made using polymers of the same name. This finish is very similar in characteristics to the one described above, but acrylic is made using a different technology. Among other things, he absorbed all the advantages of a vinyl counterpart, which allowed him to acquire many other advantages. Consumers claim that the main one is less susceptibility to ultraviolet radiation.

If you decide for yourself the question of which siding is best for cladding a house, it is recommended that you read the reviews. From them you can find out that acrylic does not lose strength during the entire period of operation. Attachment points cannot become points of weakness. You can use such a lining at higher temperatures, which sometimes rise to the mark of 85 degrees. The front part can be exposed to chemical solvents that can adversely affect products. This indicates the possibility of cleaning with synthetic detergents.

According to users, this material almost does not burn, and when direct impact fire will emit the smallest amount harmful substances for the human respiratory system. If the issue of price is significant for you, then it is worth remembering that acrylic siding will cost more to finish than vinyl paneling. At the same time, however, it should be borne in mind that the service life of acrylic is much longer and is 50 years. Owners of private houses argue that the ultimate benefit is obvious.

Metal siding reviews

If you are faced with the question of which siding is best for cladding a house, it is recommended to read reviews of each type. This will let you know that the leader in fire safety is a metal finish that is able to cope with exposure to extremely high temperatures. According to buyers, the price of this lining is slightly higher compared to the above-mentioned materials. Having visited the store, you will be able to understand that the cost depends on the thickness of the steel and the polymer coating, the latter of which protects the material from the effects of precipitation. Sheathing a house with metal siding allows you to get a facade that will become durable, because such a finish can be used for several decades.

This coating consists of individual elements that are not subject to deformation. The thick basis excellently resists mechanical influences. Owners of private houses claim that they choose metal products for the reason that they are environmentally friendly, since no chemicals are used in the manufacturing process. The metal is distinguished by the fact that it can be used to produce finishes with a maximum service life, as well as to be used in aggressive environments. Such characteristics are not able to boast of vinyl and acrylic siding.

For reference

Installation of siding, the price of which is not so high, is carried out simply because you can not be afraid to damage it. The structure of products and manufacturing technology are in many ways similar to metal tiles. The difference is only in the profiling of sheets and dimensions.

The choice of finishes taking into account aesthetic considerations

Despite the combination of all the positive characteristics, the modern market is dominated by vinyl siding in pastel shades. For the manufacture of these panels, titanium dioxide is used, which is color stable. But sometimes bright colors on such coatings turn pale. In order to achieve saturation of tone, very expensive stabilizers are added to the products, which negatively affects the cost. Despite the fact that among the ingredients are special pigments, bright colors are at risk of sunburn. Given this circumstance, it is recommended to buy pastel-colored vinyl products.

The color range of metal coatings

If you are still thinking about which siding is best for cladding your home, it is definitely recommended that you read the reviews before visiting the store. After reviewing them, you can understand that the metal finish is better than the rest in terms of color. If we compare vinyl products with other facade systems, we can highlight the advantage in a variety of colors.

The range of metal cladding is so diverse that you can choose absolutely any color - from dark to light. In this case, the brightness will not affect the final cost of the constituent elements. That is why you can create a truly original facade. Before purchasing, you need to pay attention to the color schemes of the buildings in the neighborhood. If they were created taking into account a certain trend, then you should decide what is more important for you - general harmony or your own originality.

Material calculation

The calculation of siding for house cladding is very important, because by doing it, you can determine how much material is needed in order not to visit the store again and not overpay for unclaimed finishes. Here everything will depend on how the panels are supposed to be oriented - horizontally or vertically. In the first case, it is necessary to measure the height of the walls, and then pay attention to the width of one panel. At the next stage, the first value is divided by the second, and then multiplied by 4. This is true if the house has a simple architectural solution, otherwise it is necessary to multiply the result of the division by the number of walls that are supposed to be faced. It is important to take the material with a margin of 10-15%, as it will have to be cut during the installation process.

Siding installation

Exterior cladding of the house with siding can be carried out only after the master familiarizes himself with the technology. It provides for initial preparation, during which old finishing materials are removed from the surface. Cracks can be repaired with plaster. In order to exclude the occurrence and spread of harmful mold and fungus, the walls must be treated with special solutions. Items that are loose or rotted must be removed or replaced.

Lathing installation

Installation of siding, the price of which is 300 rubles. per piece, can be produced by you yourself. The mentioned cost is relevant for metal products. When installing them, you will need to install a frame, which is also called a crate. This system can be made of wood or metal. The first option is cheaper and does not require special skills from the master. But such a frame will not last so long, as it undergoes decay.

If the mentioned price of siding for house sheathing does not suit you, then you can choose the vinyl version of this finish. For one product you will have to pay an average of 200 rubles. Whatever material the lining is chosen from, the technology remains the same. The next step is to install the panels. The first is inserted into the grooves of the vertical profiles, while you need to bend the middle. After the panel is lowered to the starting profile, and the locking connection snaps into place. As soon as the lower part is fixed, the top of the panel can be pressed and fasteners can be installed in the center of the technological holes.

Conclusion

The price of siding for house cladding is not in all cases a fundamental factor for the buyer that influences the choice. Each consumer is guided by certain principles. Among them - quality, environmental friendliness and aesthetic appearance.

There are many ways to decorate the exterior of the house, from budget to very expensive, and each of them has its own advantages and disadvantages. However, siding has been holding the leading position in the market for many years. It is used for cladding the facades of residential buildings, industrial buildings, warehouses, garages and much more. Now a huge number of varieties of siding have appeared on the building materials market, differing in the material of manufacture, color, and performance. But which siding is best? The answer to this question can be found in the article.

Which siding is best

What is siding, what are the features

Advantages of siding as a finishing material

The history of siding began about 200 years ago in the United States, where builders decided to mount wooden planks not end-to-end with each other, but overlapping. They thought that in this way they could improve the moisture-proof properties of buildings, since water, flowing down boards reinforced at a certain angle, would not fall on the walls of the house. Due to this, the damage caused to buildings by water was significantly reduced - the main amount of the negative impact of natural forces was taken over by just the facing layer of wood. A little later, this finish became known as siding. And although the wooden material did not last long, it performed its main function - the protection of facade walls - perfectly. Over time, people have learned to make siding from other materials that are more resistant to weather conditions, and therefore more durable. There are products made of metal, cement, vinyl, acrylic.

Siding sheets

stone siding

The benefits of siding are listed below.

It perfectly protects the surface of the facade of the house from the forces of nature - rain, snow, wind, negative ultraviolet radiation, and so on. The main wall will serve much longer if it is not affected by the above factors.
Siding is not required. careful preparation the surface of the walls, but it perfectly hides all the visible flaws of the facade, due to which the building will look beautiful and neat. Under the siding, you can easily hide various flaws that appeared on the walls during construction, the ugly material from which the house was built, and so on.
Siding hides all the flaws of the facade
Thanks to the siding, condensate will be discharged along the inner surface of the siding panels.
Since there is a large selection of siding on the building materials market that differs in appearance, the type of structure can not only be changed beyond recognition, but also made unique and individual. At the same time, the building sheathed by him looks modern. There are also types of this finishing material that imitate various materials- stone, brick and so on.
Timber siding
Siding is a durable material. Without restoration, it can serve for more than 30 years. Of course, wood siding will last less than other types, but it has become more durable over its 200-year history.
Installation of siding is simple and straightforward - all work on the cladding of the building can be done independently, without involving builders, which means that there is an opportunity to save money.
Installation of vinyl siding

Several options for finishing the facade with siding
You don't have to worry much about siding. To make it look beautiful and like new, it is enough to wash it occasionally, and then only when necessary.
Siding is environmentally friendly safe material. It is biologically inert and does not harm human health.

Siding panels for natural materials

A few words about material burnout

Indeed, the question of whether siding burns out, even the highest quality, is often asked by the owners of private houses. And yes, siding does get lighter when exposed to sunlight. Often people consider this to be the main drawback of the material, however, before judging the quality of the finish precisely by this indicator, you should figure out how the siding burns out.

Siding burnout

High-quality siding always burns out gradually and evenly, this process is invisible to the eye. The difference will be noticeable only if an extension is made to the house sheathed with siding in a few years and sheathed with exactly the same siding. The first will be lighter by several tones. That is why it is recommended to immediately sheathe the entire structure completely, not to stretch this process for 1-2 seasons.

Wall cladding with siding

On a note! High-quality siding made in Canada will begin to fade no earlier than 10 years after the start of operation, material from Russian manufacturers will be bright, as on the day of purchase, for 5 years, and cheap low-quality material will lose its richness of colors in a couple of years.

Why does siding burn out differently? It's all about titanium dioxide, which is used in the siding manufacturing process. It's just that in the manufacture of high-quality material this substance is used much more.

Another example of the use of low-quality siding

Now it's time to figure out what types of siding exist. This will help you make the right choice of finishing material.

Vinyl siding

This is the most popular type of siding right now. The panels are made of polyvinyl chloride (PVC) and can be of various sizes, however, on average, the thickness of the material will vary between 0.96 to 1.2 mm, and the width will vary from 10 to 30 cm. The length of each panel varies from 2 to 6 m .

Vinyl siding

Features of vinyl siding

Advantages of PVC siding:

low cost;
the temperature range of operation of the material ranges from -50 to +50 degrees;
such siding perfectly withstands the effects of natural elements, is not afraid of moisture, corrosion does not occur on it;
light weight;
ease of installation;
the material is non-toxic;
easy to clean;
does not need tinting;
does not become infected with mold or fungus;
does not rot;
does not conduct electricity;
large selection of colors.

Options for different brands of vinyl siding

On a note! One of the main advantages of vinyl siding is that it is able to imitate completely different finishing materials, be it stone, brick or wood.

Cons of PVC siding:

he is afraid of strong blows and mechanical impact;
during installation, the coefficient of linear expansion must be taken into account. Otherwise, during operation from strong temperature changes, the material may be deformed.

Color solutions

Docke Blockhaus siding colors

Acrylic siding

This material is made on the basis of acrylic polymers (ASA). In terms of performance, it is very similar to vinyl siding and has the same advantages plus a few additional ones:

suffers less from burnout under the influence of solar ultraviolet rays;
very durable;
does not deform when exposed to temperatures;
he is not afraid of various aggressive substances;
longer service life (up to 50 years).

The main disadvantage is the high price of the material.

Acrylic siding - a novelty in the field of facade finishing materials

Siding "Blockhouse" (Blockhouse)

metal siding

You can also sheathe the house with metal siding, which is made of steel, aluminum, zinc. The length of the panels can reach 6 m, and the width - 12-30 cm. The manufacturing technology resembles the production of metal tiles. The most popular is aluminum material, however, compared to other metal types, it is easily deformed and cannot be restored if damaged. Fortunately, for protection against rust, it is covered with polymers or galvanized.

metal siding

Advantages of metal siding:

the material is not afraid of temperature changes;
durable;
lasting;
ecologically pure;
has a high level of fire safety;
can be used in the most aggressive conditions;
harmful microorganisms do not live on it.

Disadvantages - the risk of corrosion in places of delamination protective coating as well as loud noise during rain. More metal material is more expensive than, for example, vinyl, which increases the cost of finishing the facade.

Metal siding can become a design element on any buildings and modular structures

wooden siding

wood siding

Attention! To reduce the risk of the above consequences, siding undergoes a high-quality drying stage during manufacture.

Advantages:

safety for health and environmental cleanliness;
excellent indicators of thermal insulation;
beautiful appearance.

Flaws:

rapid loss of attractive appearance;
fragility;
low fire safety index;
the appearance of deformation is possible;
high price;
the need for additional painting material.

Wooden siding in the decoration of house facades

Wooden siding, although it is an environmentally friendly material, is not used so often for exterior decoration.

fiber cement siding

This finishing material is made from sand, high-quality cement, cellulose fiber, due to which it is recognized as environmentally friendly. In appearance, it is very similar to a decorative stone, it looks very natural and attractive.

Fiber cement panels today are real fashion trend. Particularly popular are those facade panels that are made by analogy with Japanese

Advantages:

the material is not afraid of fire;
he is not afraid of rain and snow, ultraviolet rays of the sun;
does not rot;
fungus and mold do not grow on such siding;
has high strength;
easy to operate.

On a note! In Russia, fiber cement siding is extremely rare, but in Europe it is very common and has been used for facade decoration for over 100 years.

Fiber cement siding Balnit

Choosing siding step by step

It is from the choice of siding that the quality of the facade finish and the appearance of the building largely depend. Since all types of material have their advantages and disadvantages, it is important to correctly assess the operating conditions of the siding and many other factors so that the finish serves for many years and pleases the eye, but does not require additional repairs and restoration.

Step 1. First of all, it is important to assess your financial capabilities and the operating conditions of the material. From this will largely depend on what the siding should be made of. The advantages and disadvantages of each type of material are described above. Note that the most durable is acrylic / vinyl siding, and the least durable is wood.

Types of siding for house cladding

Step 2 It is necessary to choose the color of the panels, their texture. They must meet not only the wishes, but also the conditions of use. It is best to prioritize light colors, since the dark ones will get too hot in the sun. Yes, and they fade not so noticeably.

On a note! If there is a desire and means to make the house exclusive, then you can directly contact the siding manufacturer and offer him to make a siding with an individual pattern and geometry according to the wishes of the customer.

Popular siding colors

Step 3 The quality of the coloring of each panel should also be evaluated. Painting should be done on both sides, and the surface should be smooth, without roughness (if it is not textured). If the paint is only on the outside - this is an indicator of poor-quality siding.

Natural wood effect, natural wood effect series

Step 4 special attention the thickness of the cut of the material panel is also worthy, which should be the same throughout the cut. Otherwise, the panel may be deformed in hot weather.

Pay attention to panel cut thickness

Step 5 Temperature resistance should also be considered. The larger the temperature range of the material, the better.

The permissible ambient temperature is also important

siding problems

Step 6 It is worth choosing a plastic and sufficiently flexible material (we are not talking about wood or fiber cement). When bending a corner, the siding should precisely bend, and not crumble or break.

Step 7 For a beginner who is going to install siding on his own for the first time, you should pay attention to the ease of attaching the panels. Each type of material has its own recommendations for strengthening on the facade of the house. It is better to choose the one that is mounted the easiest.

Sheathing a house with siding slightly resembles interior decoration with plastic panels.

Step 8 In order not to redo the siding in a couple of years, it is better to opt for the most durable and high-quality material.

How to choose the right siding for your home

Step 9 Fire safety certificates should be requested from the seller.

Sample fire safety certificate

Market Review

When choosing a siding, the manufacturer is of great importance. The fact is that both the service life and the quality of the material, its strength, fading rate and much more will depend on this.

Table. Foreign manufacturers of siding panels.

Variform	American brand, which is distinguished by the quality of its products. Proven in the market.
Mitten	Canadian siding with a wide variety of colors. Very expensive, but proven material.
Gentek	High Canadian quality. The main competitor of the previous firm.
Royal	Polish brand, but very expensive compared to domestic brands. Usually this siding is bought only because of the wide variety of colors, but in terms of quality it can be replaced with domestically produced material.
Vytec	Another Canadian siding company. Durable and high quality, but like other imported materials, expensive.
Vox	Belarusian siding, which is often positioned as Belgian. Good stuff.

Prices for metal siding Grand-Line

Table. Russian manufacturers siding panels.

dock	Perhaps the most popular in Russia. The production plant is located in Moscow. Often suggested by sellers as German, but this is not the case. Inconvenient to install, and components often deteriorate in the sun.
"Nordside"	Siding from St. Petersburg. Very good quality material at a reasonable price.
Fine Ber	Novosibirsk firm. Too complicated to install, which is why it is not popular. But the price is quite high.
Tecos	Siding from Tver. Often presented as Belgian. The price is high, but the quality is excellent.
Alta Profile	Quality material from Moscow. A small selection of colors, fades quickly, but is easy to use.

Fixing siding to a wooden house

In order for the cladding of a wooden house with vinyl or metal siding to be of the highest quality, at the same time as the panels, they acquire additional elements, which are required for finishing window and door openings, gables, slopes. Read more in this article.

Video - Choosing siding

Video - Installation of siding

It is best to choose siding that is produced not just by a well-known company, but by one that has been in demand for many years and has won the trust of customers. As a rule, the quality of such manufacturers is as high as possible, since reputation is very important to them. And some organizational issues are easier to solve with them. Moreover, if a decision is suddenly made to make an extension to the house in the future, siding of the same type will be easier to find than bought from a one-day company.

Among the many cladding options available, home siding is a universally recognized façade finish. Regardless of whether repairs or wall insulation are needed, in most cases this practical method is used. When choosing suitable material take into account both the cost and properties of the siding.

About material

Siding - tracing paper English word; translation means " outer skin” and unambiguously indicates the purpose of the material. Siding is the outer part of the hinged facade system, which is also called ventilated.

Ventilated siding facade: warm walls - a comfortable home

Appearance

Siding is called panels (slats) of an elongated shape, with a perforated edge and a latch that allows you to connect them in sections of the desired size. There are several types of accessory strips:

Main(ordinary).

Auxiliary. There are initial, finishing and connecting strips.

Soffit panels. Ceiling panels for roof lining.

Planks for windows and doors.

Edging. Connect the corners of the siding panels, covering the ends.

On sale are panels of various colors and textures. Panels with a surface imitating wood (timber, block house, lining), natural stone, plaster, brick are popular.

On the principle of arranging a hinged facade system

The hinged system is equipped in several stages:

Lathing installation(guides). As a lathing of wooden walls use wooden slats or metal profile; wooden crate pre-treated with a protective compound. The crate is made vertical for horizontal panels, and vice versa. The role of the crate is to maintain an air gap between the wall and the siding.

Waterproofing. It must be done with the help of a moisture-windproof membrane.

Siding accessories

Warming. If thermal protection is needed, the crate is made in two layers, between which a heater is placed.

Panel installation.

Such a device of the facade system allows air to circulate freely along the walls, preventing the formation of condensate on the wood. Permanent ventilation protects the walls from mold and fungus, and the system as a whole - from external influences (sun, rain and frost). In addition to protective, siding has another important function - decorative.

Features of the use of siding in the cladding of wooden housing

Wooden buildings attract with their spectacular, natural appearance, the preservation of which is a difficult task. Protect wooden walls from destructive dampness and mold, the arrangement of the outer skin helps.

The most common material for sheathing a wooden building is vinyl siding. The most demanded products are pastel colors (as the least fading) and with imitation of natural materials. Professionally installed siding can significantly extend the life of your home. As a frame, it is more practical to use a galvanized profile that is not prone to corrosion and deformation.

Installation process of vinyl siding with waterproofing

Types of material for exterior decoration: advantages and features

Siding is in consistently high demand due to its low cost and versatility. Panels easily solve several problems - decorating, protecting and insulating the building. The first siding panels (introduced in the 19th century) were wooden. Modern manufacturers offer a choice of siding for house cladding in a wide color palette, made from different materials:

Vinyl

More than half of buyers make their choice in favor of vinyl siding, due to its characteristics:

Cheapness.

Easy installation(light construction material) and aftercare.

Thermal stability. The material is designed for the range from -50 to +50°C; does not burn in fire, but melts.

Weather resistant. Excellent protection from wind, rain and snow.

Wide palette of colors.

High-quality vinyl siding - a sought-after material for exterior cladding

The disadvantages include:

Lifetime. Not as durable as other materials; fades in the sun over time (white - turns yellow).

Installation subtleties. Panels respond to changes in temperature by expanding or contracting. During installation, this is taken into account, leaving gaps and not fixing the panels too tightly (otherwise the siding may wave or burst).

Acrylic

When choosing which siding is best for cladding a house, you should pay attention to acrylic. This type facing panels with a high-strength multi-layer structure was developed later than vinyl; thanks to technology, panels of dark, saturated shades appeared. Acrylic products are in constant demand due to the following advantages:

Sun resistance. 10 times higher than vinyl panels.

Strength. Over time, it does not deform (withstands from -50 to +80 ° C), does not give backlash at the attachment points.

Practicality. Easy installation and further maintenance.

The main disadvantage acrylic panels is a high price. If you are tempted by cheap panels, most likely these are products made in violation of technology or from poor quality materials; in the future, cracking or discoloration should be expected from such a coating. A certificate of quality from the seller will help to avoid such a problem.

Acrylic siding is highly UV resistant

Metal

High-quality metal siding consists of several layers. The basis is a steel sheet protected by a zinc, anti-corrosion coating and a primer. A layer of polymer is applied to the front surface, paint or varnish is applied to the back. Thanks to this structure, the profile has excellent performance properties:

Life time. The average is from 25 to 40 years. The panels retain their original color for 10-15 years.

Strength. metal plating resistant to temperature changes, deformations, impacts, fire and precipitation.

Variety of colors.

The cons are:

High price.

Weight. Complicates installation and repair.

Low thermal insulation.

Prone to corrosion in places of chips and scratches.

fiber cement

Fiber cement (fiber concrete) siding is increasingly used in the arrangement of facades country houses. The composition of fiber cement panels includes cement, sand, mineral fillers (natural or synthetic) and reinforcing fibers. On the front side there is a layer with the texture of wood or stone.

Fiber cement siding does not have interlocks; installation is overlapping

The positive properties of the material are:

Long service life. Considered the most durable.

Wear resistance. The material is used in all climatic zones.

Strength, dimensional stability and environmental friendliness.

Good soundproofing.

Easy image change. Bored color fiber cement coating easy to change by simply repainting it.

The disadvantages include:

Weight. Fiber cement panels weigh more than metal and polymer; the crate must be strong.

Fragility. Care must be taken during transport and installation.

Ceramic

Ceramic siding is a type of fiber cement material. The Japanese came up with the idea of adding clay to the composition of fiber cement or making the front coating ceramic. Keramosiding has valuable qualities:

Fire resistance. The property is complemented by UV resistance, which allows you to maintain the original appearance of the facade for many decades.

Strength. The material is not afraid of accidental damage and heavy loads (used in seismically active areas).

environmental friendliness, ease of care, large assortment.

Reference Japanese siding

There are also disadvantages:

Price. The cost of panels depends on the thickness and complexity of the decorative layer; it starts from 1900 rubles. per m2, but pays off with a long service life.

Weight. It does not affect the foundation, but causes difficulties during installation and loading and unloading (the weight of the cladding is 19-25 kg / m2).

Difficulty of installation. Ceramics are difficult to cut; without special tools and skills, it bursts easily.

Wood

The history of facade siding began with wood panels. Despite the advantages of natural wood, there are fewer and fewer people who want to use wood siding every year. Modern panels are pressed from wood waste, and the facade requires an annual allocation of funds for treatment with protective mixtures. The material has undoubted advantages:

Gives the facade a natural, eco-friendly look.

Provides additional protection against heat loss.

And the undoubted disadvantages:

Needs periodic maintenance (otherwise, under the influence of atmospheric moisture, it deteriorates, darkens and rots).

Fire hazardous.

Care wooden siding requires a lot of sacrifice

basement

The basement more often than other fragments of the house suffers from external factors - melt water, temperature changes, ball strikes. The traditional plinth requires periodic maintenance ( plastering works, crack sealing). Basement siding is made of vinyl and has operational advantages:

simple installation (at any time of the year) and low weight;

increased moisture and frost resistance;

strength (panels do not crack and do not fade);

many design solutions (panels imitate natural stone, wood, brick).

How to choose siding in the video:

Material selection: what to look for

Knowing what features each type of siding has, you can prioritize. Before choosing siding for a wooden house, you need to remember that:

Vinyl siding has a significant expansion coefficient and painfully perceives sudden changes in temperature. To prevent it from bursting from frost, installation must be done professionally.

wood siding the least resistant and even with proper care will last less than others.

metal siding may rust; after impact, a dent remains on the surface.

An extraordinary choice - vertical (acrylic) siding

When choosing, also pay attention to:

House accommodation. For a structure located in the shade, vinyl siding is enough, if the housing is constantly in the sun, you should think about acrylic.

Quality facade material (confirmed by a certificate). High-quality panels have the same thickness and structure, through paint and uniform color, one-dimensional fixing holes that do not crack when slightly bent. If the panels in the lot have different kind, installation problems are inevitable.

Manufacturer. The market is widely represented not only by domestic products, but also by Polish, Turkish, Canadian and other manufacturers. Theoretically, you can use panels from different companies if they match in size, but no one can guarantee, for example, that such panels will fade in the sun the same way. So at least the attractiveness of such skin is a big question.

The quality of the walls of the house. uneven walls can be sewn up with any type of siding, the main thing is to build the crate correctly.

Color. It determines not only the type of material, but also its cost. More saturated color means large quantity coloring pigment and high resistance to fading.

Bright siding emphasizes the architectural features of the project

How to choose the right color

Thinking about what kind of siding to sheathe wooden house, buyers expectedly attach great importance to color. At the same time, it is difficult for most to imagine how their house will look in one or another palette of colors. Difficulties arise when choosing a combination of colors for the siding and the roof, the facade and its elements (finishing the jambs, the color of the drain, filing the cornice). A successful combination of colors on samples in practice often turns out to be a failure.

About the properties and capabilities of fiber cement siding on video:

It is much more convenient to select colors, having a visual model in front of your eyes. There are online services that allow you to try on different color combinations on 3D models. By going through the different options, you can see what the final result will look like and choose the color scheme you like. Among the variety of options, there are classic, time-tested combinations:

Dark roof and light facade. A traditional option that allows you to use an additional technique - contrasting trim parts (plinth, windows).

Roof and facade of the same color(sometimes of different intensity). To many, this option seems boring, besides, architectural details can merge and get lost, reducing the charm of the house.

Light roof and dark facade. Less common, but can be a spectacular technique if you choose the right one. color accents for parts (door and window openings).

Shades of the same color. Almost always a win-win.

Combination of natural shades. Natural colors (brown, sand, gray, green) perfectly complement each other and harmonize with the landscape.

Same design, different effect

How to choose a manufacturer

By choosing a firm with many years of experience, you can be sure that:

All offered material is certified. You will not get a fake, whose quality will inevitably manifest itself after a couple of years of operation.

The purchase will be economical. Serious suppliers keep the best price-quality ratio.

The purchase will be complete. You will receive a complete set of profiles and accessories and will be spared from a long selection necessary elements from various sellers.

The purchase will be practical. You will be provided with installation instructions, accurate (and usually free) calculation of materials.

The material has a warranty period. On the high quality indicates a guarantee of 25 to 50 years. Many resellers will refund the cost of the material under warranty and will accept unused panels at base cost.

About Japanese Ceramic facade panels on video:

Myths about siding

You often hear that:

Plastic material may cause condensation. Installation of siding according to the ventilated facade system removes moisture from the walls due to the air layer. Problems arise if the panels are screwed directly to the wooden wall.

Panels emit toxic substances. Products manufactured using modern technologies are tested for compliance with sanitary standards.

The material is quickly destroyed by the forces of nature. Numerous studies and operation in various climatic conditions invariably indicate the material's resistance to a wide temperature range, strong winds and precipitation.

Basement siding was originally designed for harsh operating conditions

When choosing a siding, buyers are based on the allocated budget, personal preferences and observations. Many country wooden houses are protected by a facade made of this material. Years pass; open wooden buildings, despite careful maintenance, darken and require repair, and only siding is still reliable and defiantly beautiful.