Country furniture with their own hands. DIY garden furniture: successful homemade DIY homemade garden furniture made of wood

Not a single summer cottage or country house can do without various garden furniture. But today, not everyone can afford to buy expensive furniture. Therefore, many masters are looking for a way out of this situation. They begin to make garden furniture with their own hands from improvised materials.

How to prepare improvised materials for the manufacture of country furniture

Any materials at hand, such as pallets, car tires, wooden boxes, industrial coils and other "unnecessary" items, of course, are not in the best condition in order to immediately make garden furniture out of them. Therefore, it is first necessary to carry out a number of preparatory measures:

If these are wooden pallets or industrial coils, then they must be washed and dried well. If necessary, you can use a planer to remove the top layer of wood, and then a grinder that will make their surface smooth. Then they need to be covered with a special paint for wood, use varnish or stain so that the furniture has a natural look. Wooden boxes must go through the same preparation procedure.
Car tires must be washed well with special detergents or cleaners for rubber so that they acquire a black shiny color. Then they can be covered with paint, depending on what kind of furniture set for a summer residence you are planning to make.
Plastic boxes should be washed well and examined for cracks and chips. If it has defects, then the furniture can quickly break down and injure a person. Before taking plastic boxes to work, they can be painted if necessary.
Bottles must be washed and degreased. All other actions depend on the furniture scheme drawn up.

Photo gallery: what can be made from improvised materials

A wooden pallet swing with a soft seat and back is perfect for an evening out. Upholstered garden furniture for picnic and relaxation can be made from wooden pallets Easy chair for children from a plastic box is very convenient Garden furniture made of wooden pallets and cable reels can be painted any color Furniture can also be made from old tires Shelves for storing tools and equipment for the street are easy to make from wooden boxes Soft chairs made of hemp are very comfortable A cable reel table with a sunflower and mushroom chairs will be very popular with children. Tire ottoman can be painted in any color A garden table from a cable reel and drawer stools can not even be decorated

How to make a country bench from pallets: step by step instructions

Today, such pallets have become very popular with country craftsmen, so they began to make various pieces of furniture for the backyard from them. To make a bench, you will need two or three pallets and other tools.

Material calculation and necessary tools

For the manufacture of garden bench you will need:

wooden pallets;
iron corners - 6 pieces;
bolts, screws, washers - 12 pieces each;
grinder or sandpaper;
Bulgarian;
roulette;
plane;
drill with a drill of the required diameter for screwing in bolts;
wooden planks for legs - 4 pieces;
goggles and heavy construction gloves.

You may also need additional materials:

thick ropes or wooden planks for making armrests - 2 pieces;
wheels - 4 pieces;
varnish or ordinary paint on wood;

If all the tools and materials are available, then you can start making a bench.

Stages of assembling a garden bench from wooden pallets

All work consists of several stages:

First you need to process the wooden surface of the pallets grinder making the surface perfectly smooth. Otherwise, there is a high probability of getting a splinter.
After the pallets have passed all necessary training, you can begin work on the manufacture of benches. Its dimensions depend on the area of the site. To make a small bench, pallets must be cut into two parts of different sizes. In the future, it will be necessary to make a seat from the wide part, and a back from the narrow part.
To assemble the back and seat, it is necessary to connect the parts using a metal corner and screws that are screwed into pre-drilled holes in the details of the pallets. After all the elements are combined, it is necessary to tighten the screws well so that the bench acquires the necessary strength and can withstand the heavy weight of people.
Four identical legs must be cut out of wooden planks. The height depends on your preference. But it is better to make them low (about 50-60 cm), but wide to ensure greater stability. Also, such a bench will have a more aesthetic appearance.
Now you can attach the legs. For this, it is necessary to use iron corners, since this method is the most durable and reliable.
If you don't want to mess with attaching the legs, you can simply stack three pallets on top of each other and connect them with screws. Thus, your bench will rise above the ground to the required distance. Wheels can be attached to the base of the bottom trays to make it easy to move around the garden.
After the main frame is assembled, you can add some elements to it, such as armrests and soft pillows. In this case, your ordinary bench will turn into a comfortable garden soft sofa. Thick ropes can be used as decorative armrests, which will be stretched along the sides of the bench and securely fastened with special brackets.
You can finish the work by coating the bench with paint or stain.

Video: how to make a do-it-yourself pallet sofa

Armchair from an old tire for a summer residence

Very often, car owners in the garage gather a large number of old tires that have nowhere to go, but it's a pity to throw them away. Of these, you can make comfortable armchair for giving. The main thing is to make a detailed drawing and follow the instructions step by step.

In order to get started, you need to take:

car tire (for one chair 4 tires);
chipboard sheet;
furniture stapler;
screwdriver;
thick foam;
felt;
knife or grinder;
upholstery material (or another of your choice).

Chair manufacturing steps

This piece of furniture is made in several steps:

First you need to prepare the tires for work. To do this, you need to wash them well with special substances for rubber, and then cover them with a special solution that will make them perfectly smooth and velor-velvety to the touch.
In order to connect the tires to each other (back and seat), you need to use self-tapping screws and a screwdriver. Before this, it is necessary to fasten the two tires to each other (seat) in the same way so that they stand firmly on the ground.

On top of the seat and backrest, it is necessary to fix the chipboard with a stapler, which must first be cut in the shape of a circle. Now you can make the top of the seat. From above, foam rubber, felt and then upholstery are attached to the chipboard with a stapler.

From one tire, it is necessary to cut two “ribbons” with a sharp knife or grinder, which will serve as the armrests of the chair. They are attached to the back and seat with screws and a screwdriver.

If desired, chairs made of tires can be painted in any color or left in their original condition. To do this, you can use the most common building paints.

Video: chair made of tires in a case

Barbecue table from an industrial reel

A large cable reel BBQ table is a truly amazing product, as there is almost nothing to do here. You just need to put it in order, install a grate for the brazier.

Materials and tools you will need:

coil - 1 piece;
Bulgarian;
grinder and planer;
round barbecue (can be bought at the store);
foil or silicone material for stoves and fireplaces;
varnish, paint or stain;

Stages of making a barbecue table

You can make a barbecue table if you follow the instructions:

To get started, you need to do everything preparatory work in order for the future table to be aesthetically attractive. Take a planer and remove all unnecessary protrusions and bumps on the coil. Then grind all surfaces well with a grinder.
Next, you need to tighten the threads on the pins well so that the table does not fall apart. Since you know the dimensions of the barbecue grill in advance, you need to calculate and cut a round hole in the middle of the coil with the appropriate parameters.
Plug in the barbecue and see if everything is in order. If yes, then take it out and start to bring beauty. To do this, you can cover the entire coil with varnish, stain or paint with wood paint.
When the varnish or paint is completely dry, you will need to install the grate. To do this, you can use ordinary foil, as this is the most cheap option. It will protect the boards from burning through, but it will have to be changed often. You can use a special silicone heat-resistant material that is designed for fireplaces and stoves. It is sold in hardware stores. This material will be a good seal so that the barbecue sits firmly in its hole.
Now you can set the table in any corner of the garden and enjoy delicious food. Around it, you can build chairs from hemp or the same small coils.

You do not need to have professional skills and abilities in order to independently make unique and unusual country furniture from improvised materials. It does not take a lot of time. In addition, there will be practically no financial costs.

In the spring-summer period, the question of how is done garden furniture with your own hands. Successful homemade products can become the most important decoration of any garden. Before thinking about how to make garden furniture with your own hands, it is worth determining what it can be made from. The most common material for country furniture is wood, which fits perfectly into site landscape but other materials are also used. Be sure to take a closer look to see if you have preserved in your country house or in country house some seemingly unnecessary things. Quite often, masterpieces are obtained from the simplest objects.

DIY garden furniture. The most popular trend is wooden furniture

Wooden furniture is environmentally friendly, beautiful, concise and relatively easy to manufacture. Sometimes even rough wood is not needed to work with wood. male power. Do-it-yourself garden furniture is made of wood in various ways, depending on what materials are to be used:

Easiest to work with finished boards, bars, slats - already processed material. There are many simple and more complex ways to make furniture for a summer residence with your own hands. Benches with a back are convenient for relaxing, a whole set is indispensable for organizing a feast, and benches without legs will turn out swing- only a few carpenter skills, boards and a rich imagination are required.

Advice! It is better not to choose logs for creating furniture coniferous trees. They emit a resin that will stain the clothes of those sitting. If there is no other material, it is necessary to first deresin the wood.

Much more monumental benches and tables are obtained from logs. Sometimes you can just put big log and throw a couple of pillows on top to create a comfortable seating area, but it's better to work on creating a more interesting project. Some masters manage to do without a single nail, creating a mobile log structure.

Great for creating hemp garden furniture. Separate small stumps can be adapted for stools, and a larger stump - under table. It is only important to fix the stumps so that they do not fall or stagger, for which they can be dug into the ground or placed on a flat surface - a pedestal on the terrace or a small platform on lawn. To make it comfortable to sit, you can sew bright pillows for them.

If you use branches and snags from the forest to create garden furniture, you can get into a real fairy tale. Nature itself sometimes dictates the original outlines of future masterpieces. A garden bench made of branches will harmoniously fit into the design of any site, for the frame of which it is better to take more durable material (logs, bars, etc.). Driftwood or branches are sometimes used even as legs, but for structural strength it is better to decorate only the back and armrests with them.

To create garden furniture or its design, you can use tree cuts. Such cuts can be used for countertops, chair seats or stools. They are attached to each other and to the base with waterproof glue.

Simple and comfortable wooden furniture for a summer residence with your own hands

The happy owner of a house outside the city wants to perfectly equip his house. Dacha is the place where you can come to relax your body and soul with a noisy company, spend a quiet cozy evening with your family and loved ones. Therefore, it is extremely important to equip the cottage with maximum comfort and coziness. This can be done only by approaching the matter individually, with soul and enthusiasm.

Bar counter and high chairs made of pallets for original design dining area for the street

Garden furniture from painted pallets

It is best to make furniture for a summer residence with your own hands, taking into account the opinions of all family members and relying on your own aesthetic sense. In order to understand how best to approach the implementation of your ideas manually, it is worth familiarizing yourself with all the nuances of implementing an idea in more detail.

Interesting ideas for a simple country bench made for yourself

Original rocking chair from improvised materials

Soft sofa made from improvised materials for relaxing in the shade

The most important advantage manual method equip your site - the price. Do-it-yourself things are most often created from improvised materials with a minimum of additional costs. You can be sure of the reliability of the materials used, environmental safety, especially if children will have a rest at their summer cottage.

Wooden bedroom furniture in eco style

Safe DIY wooden garden furniture

List of benefits:

low cost;
sale of unnecessary things in everyday life;
opportunity self-selection design;
confidence in environmentally friendly material;
practice in a new field and a lot of positive emotions!

An original idea for decorating a site from improvised materials with benefit

Such items will be the most striking expression of the individuality of each owner. Creating furniture for a summer residence with his own hands, the owner not only saves and finds use for old things, he brings his wildest dreams and fantasies to life.

Unusual hanging pallet swing for a country house

Beautiful and interesting ideas for decorating a corner for evening tea parties in your own garden

Use of materials and tools

Do-it-yourself kitchen furniture for a country house

It is worth making a decision about what materials and tools to use in the manufacture of country furniture with your own hands, starting from the type of furniture.

From the vine. Making wicker furniture that looks beautiful and homely is easy. It will perfectly fit into any interior with the right presentation and technique. Wicker furniture is environmentally friendly due to the use of wicker in its manufacture. It is possible to manufacture from bamboo, rattan or wicker, but this option will be much more expensive. Recently, newspaper sheets have been increasingly used as the most economical way to make a necessary thing in everyday life.
Handmade willow garden furniture

Wicker floor shelf and wicker vase to create coziness and comfort
From a tree. The most popular material is wood. From wooden elements, you can make everything you need that you may need in country interior. After all, wooden elements are distinguished in the manufacture of lightness, economy and a high degree environmental friendliness. Approach to the manufacture of furniture made of wood is depending on the type used. In this regard, various tools may be needed. It is best to use processed boards and plywood. But various unnecessary things made of wood can also be used, which, with proper decoration, can be an excellent addition to the overall composition of the interior. It is better to refrain from making items from coniferous trees, as they contain a lot of resin. A beautiful addition to the site will be things created using logs. Increasingly, in summer cottages you can find furniture options from stumps of various sizes.
Homemade wooden furniture of an unusual shape

Do-it-yourself wooden hanger for the hallway to the country house
Of steel. This material is stronger than any, but it requires high costs for the manufacture and purchase of special materials. Steel furniture can be connected with bolts and nuts, and welding can also be used. Stylish element will be the use of an element for bending metal rods. But this will require a certain amount of skill and the use of additional tools.
Stylish and durable stainless steel bench

The material that should be used when creating furniture for a summer residence should be chosen in accordance with your desires, interior and resources. Before you start creating things, you should make sure that you have necessary materials and tools. It is better to do a thing right away than to delay its production due to a lack of necessary elements.

Table and chairs of self-made on a green lawn

Hammock for relaxing among the greenery at your favorite summer cottage

decoration

Bright and unusual table made of unnecessary tires and wooden corner, decorated with handmade pillows

Decorating country furniture with your own hands is worth it, based on the main trends of a particular interior. It is worth choosing a color scheme, material and various trinkets to create coziness, taking into account the general interior of a separate room or the entire summer cottage as a whole. So you don’t have to regret the created original thing, which has nowhere to attach in the country.

Safe and inexpensive garden furniture made of wooden beams

Pallet corner with upholstered seat and beautiful cushions

All kinds of pillows or soft toys made by hand can become decoration elements - it's not difficult! You can embroider a blanket or carpet that warms the owners on cloudy cold evenings. Various branches are suitable for decor, using them in the form of hooks, shelves or empty frames. You can use improvised materials to create various natural compositions or wreaths on the door.

Unusual round sofas made from barrels, made by yourself

Stylish and inexpensive sideboard for giving from boxes

The decoration element is completely dependent on the imagination of the owner of the cottage. It is worth approaching this process creatively and with inspiration. The main thing is the ability to feel the interior and see individual items in the overall picture, while not depersonalizing the created things.

Corner for the kitchen with the necessary minimum for cooking, decorated with fabric curtains

Video: Simple garden table in 3 hours

Unremarkable plots of land are turned into beautiful places only after long and hard work. In this case, the decoration of the garden plays no less role than its planning and planting. Self-creation furniture for the square is accompanied by some difficulties due to the large size of the structures, but at the same time it is interesting and cognitive process. The style on the site is usually coordinated with appearance houses, primarily with a facade. Those who do not know how to assemble the necessary structures or design them will have to seek the help of experts. New knowledge is gained from designers, experienced gardeners and owners of large holdings. On the site, in any case, it does not hurt to develop a garden theme or the theme of nature. The most experienced equip the square with beds for their pets, play areas for children and large furniture for relaxation. Assembling garden furniture with your own hands will require care and full dedication.

Peculiarities

Garden furniture usually belongs to one of 3 types, among which are portable, permanent and folding. The first category includes chairs and tables, some swing options. In which case, there is a place for them under the terrace canopy, in the garage, basement or inside the house. Permanent furniture can only be dismantled. The folding type is the most difficult to perform, but the resulting design is reduced in size if necessary, sometimes several times. Corresponding to its name, it is made by mobile connections. Folding furniture can be both permanent and portable. If possible, it is better to assemble structures for the garden in indoors with a workbench and a large work table. Then the accessories will be protected from moisture, and the storage of waste materials will be convenient, there will be best opportunities for reuse.

Rustic is the first of the list of justified options. The main milestones of the style were wood, rounded lines, relief and slight negligence. Proponents of perfectionism will like crafts in something similar to the loft style. Country style will help in arranging a natural environment for spending free time in peace and quiet. Furniture in the English style direction is made with classic "notes", balanced proportions and lines. The combination with small irregularities in the landscape will become organic. The Japanese trend in design provides for the observance of straight lines and, in fact, Japanese motifs, drawings and patterns. ornamental plants complement the street ensemble. The garden in the spirit of French classicism is furnished with exquisite products. At the same time, symmetry should be maintained in the arrangement of furniture.

Other styles that are relevant in this context are:

eco style;
Oriental;
Mediterranean.

What to do

find more or less suitable materials under the power of everyone. The wood, metal, plastic and unnecessary old things contained in the basement or garage, one way or another, are stored for later use, but sometimes these materials are forgotten. The first step is to carefully inspect all the vaults. Preparations for several original homemade there will definitely be. Old fabrics are useful in creating screens, curtains, seat upholstery. Sheets, boards, beams, slices and solid wood are sold in most household goods stores, although sometimes you have to order blanks, and sometimes it makes sense to self-manufacturing. The required metal structure is more difficult to find. Metal products stored on the site, as well as their parts, are only rarely suitable in terms of shape, quantity and aesthetics of the coating. Additional materials and fasteners are selected in advance, almost simultaneously with the main blanks.

Metal

The best DIY solutions:

bronze;
aluminum;
brass;
steel;
stainless steel;
copper;
cast iron;
iron.

Long service life paired with the anti-corrosion qualities of modern products - this is what makes the material suitable for hand assembled and, consequently, additional savings. Metal tables and chairs fit perfectly into the green background of bushes and trees. It is better to assemble your own products from aluminum - it is not in vain that it is considered the best. Seats are often made of plastic or wood, but the qualities of aluminum are also suitable for creating a comfortable seat. Legs can be made from heating pipes. Fasteners will require welding or bolts. Pipes are bent with car disk. To prevent the workpiece from cracking, sand is poured into the cavity and sealed with small bars. For countertops, QSB sheet and impregnated boards are suitable. The seats are often made of foam rubber, sheathed with vinyl leather or leatherette.

Tree

The popularity of wood is guaranteed by its natural beauty and environmental friendliness. Wooden crafts remain among the most prestigious. For garden furniture, slats, bars and boards are usually chosen, that is, materials that are easiest to work with. In open space, it is not recommended to use coniferous wood, as it spoils clothes with tar. Raw materials can still be simply tarred. Logs make massive benches. It is not easy to work with the material, but during pre-treatment it is possible to assemble mobile structures, sometimes without a single fastener. Coffee tables, armchairs and sofas can be assembled or finished using stump cuts. Some develop the idea and drive the stumps themselves into the ground, treating them accordingly to ensure a tight connection. From solid wood, snags and firewood you get interesting designer furniture, you just need to add imagination.

Of unnecessary things

Old, unused items will make gardening even easier. Shabby and broken furniture, thanks to a thoughtful presentation, will become the hallmark of the yard. From the beds you get low railings, cabinets - doors or gates. A broken piano will play the role of a secret bar, a curbstone - a tiered flower bed. Old shelving units are turned into planters. From tires skilled craftsman will assemble a whole suite and medium-sized furniture: tables, chairs, sofas. Tires are converted into comfortable pouffes, having previously pasted over with a rope and installed on legs. In the yard there is definitely a place for an additional table from old door. And if desired, on the site you can install a trellis from door leaf. If there is a sufficient amount of raw materials in the country, a gazebo, a country shower, and animal houses may appear.

DIY garden furniture from pallets

A list of convenient options for assembly without the help of specialists:

Armchair.
Sofa.
Bench.
Deckchair.
Swing.

The structure of the pallet is ideal in terms of mounting rectangular structures. Painting will hide the wear of the material and emphasize its shape. Medium-sized products are mobile, and an increased number of fasteners provides them with an adequate service life. Chairs and tables are transferred to a convenient place on the site at the first need. Trays must not be used without prior cleaning. They are also ground and treated with various compounds. Pallets are assembled into work tables, flower stands, pet houses. The site is equipped for any needs. Sometimes whole sets are assembled from pallets, starting with ottomans, coffee tables and ending with benches, long sofas. All you need is time, material and desire - and an obstacle course or an interesting play area will be assembled from old boxes.

How to handle pallets

Pre-treatment is mandatory and ends with the application of a protective layer. Pallet preparation includes 5 stages. First of all, it is cleaned of dirt - with the help of detergent, water and washcloths. It makes no sense to process new pallets in this way, just wiping with a damp cloth is enough. Then the boards are sanded from roughness and splinters. At the same time, processing of open places is enough. Small size pallet should be handled by hand, sandpaper. Suitable also special nozzles for drills and grinders. For work, it is desirable to choose a well-ventilated area. After that, the wood is given water-repellent properties, for example, by applying a primer. For use in the garden, the oil solution will not be enough. The best remedy same is acrylic primer. If desired, the pallets are painted, and preliminary priming will just facilitate this process and save paint. Finished with varnishing.

Coffee and dining table

For creating coffee table you will need the following tools:

clamps;
electric drill;
metal fasteners;
connecting bolts;
Grinder.

A coffee table is made from just 1 euro-sized pallet. Euro pallets are not processed for a long time, because it is enough to eliminate irregularities from the corners and ends. The tabletop usually becomes a sheet of plywood, and it is attached to the pallet, after cutting off the excess. The fragment is screwed to the top of the box with four bolts. After installing the slats, you will also need glue. The structure is fixed with clamps, and then they proceed to a similar processing of the lower surface of the pallet. From pallets they collect pleasant-looking dining tables. In addition to the tools for the coffee table, you will need a long pallet (more than 1.5 meters), wood sealant, screws 2-8 cm, ready metal supports etc. First, a long pallet is ground and treated with a sealant. The size of the boards for the countertop is adjusted to the dimensions of the pallet. The boards are glued to the pallet and fixed with clamps until the glue dries. Then confirmations are applied. Metal plates are installed in the corners from below, and legs are placed on them.

Deckchair

First, visually form the back of the lounger. We put one pallet on top at an angle, and then remove several boards from the top canvas. We reduce the width of the bottom pallet to a value equal to twice the thickness of the end. We take into account that the opposite side ends of the upper structure do not always have the same thickness. We carefully remove the boards of the upper pallet to be dismantled, because they can be useful for modifying the design of the finished deck chair. Next, we put the back on the legs, and with a few more fasteners we connect the seat and back. We choose movable fasteners - to adjust the back, but the usual awkward deck chair looks good. The finished product will need to be carefully processed and painted. Alternatively, you can make a different pattern for the back, and form the base for it in continuation of the lower tier.

Stylish armchairs, sofas and benches

Benches are made in the following way: a standard pallet is divided into two unequal parts. A fragment with four boards will play the role of a seat, and an element with three - a back. Parts are fastened with screws or self-tapping screws, single or double fastening. Strengthening of fasteners is carried out with the help of bars. From the rest of the boards, 4 legs are obtained, ideally wide and low. They are connected not only with hardware, but also with corners. At the end, the back is decorated: they are given a rounded shape, sometimes they are painted. Armchairs are made in a similar way, but assembly can be done by stacking pallets on top of each other and highlighting a small back. U-shaped, corner and straight sofas are also assembled from pallets. For this purpose, pallets are combined into a line of the desired shape, in two vertical tiers. After that, the question about the legs remains open. They may or may not be done. At the end, the back is attached, choosing the optimal height based on the parameters of the pillows.

To fasten pallets, a hybrid of a nail and a self-tapping screw is sometimes used.

Supports and mounts for a mini-attraction are best done in the form of the letter "A". In this case, the control of the swing will be easy, and the risk of injury will be reduced. The design itself is made portable or stationary. As a place for rocking usually choose a big tree. In the absence of such opportunities, you will have to be content with a stationary swing. For the second option, you need a frame with an angled connection. Before mounting the structure, prepare a place for installing the crossbar. The soil is rammed, after which the stationary racks are immersed to a depth of half a meter. Concrete with gravel is added to the pit. The assembly of the back and seat is usually started from this moment. 2 pallets are used, and to create a backrest, one of them is removed from everything except the bottom. Fixation of 2 elements is carried out at a slight tilt back. Sometimes the part "under" the seat is assembled from several pallets. Then load-bearing bars are mounted under them.

Bar counter in the garden

Those who prefer a long pastime in the open air will need a bar counter for the garden. Material consumption will directly depend on the scale of the plan. The side base of the C-shaped counter is made of a minimum of four connected pallets placed vertically. A linear building is assembled from 2-3 or more. The foundation itself is constructed from approximately the same number of pallets. It is made with a recess, while the soil is strengthened with gravel. The tabletop is assembled from wide and thick elements, not from pallets. Boards are nailed to the upper tier of pallets or to vertically standing boxes of the side base. You need to select the height of the bar counter, taking into account standard length pallet - 1.2 m. For ease of use and ergonomics of the product, it fits perfectly. You will need chairs for the counter. It is better to collect them not from pallets, but from waste boards for countertops. For this reason, when making the latter, you should think about the points for cutting in advance.

Furniture from treated boards

Working with prepared materials takes less effort, and, therefore, you can work longer and more carefully on the final result. Planed boards are an example of processed material. For the assembly of garden furniture, dry solid lumber of the highest or first grade is chosen. Then the boards will not warp and will not lead. For a garden near an expensive house, furniture is assembled from radially sawn boards with minimal texture. Ordinary garden options are made from fragments of a tangential or semi-radial cut. For underlining natural beauty wood, radial sawn boards with distinct concentric rings are used. They are additionally varnished or waxed, but almost never painted. From the material obtained beautiful tables with attached chairs, armchairs, partitions, racks and stools, as well as gazebos and sandboxes.

Benches and tables made of stumps and logs

Log elements are connected with dowels: in through holes made with a 20-25 mm Lewis drill. Cups in logs are made undersized. For shops, trunks are selected without resin pockets and with a minimum number of knots; resin particles are also removed from the surface. It is better to refuse conifers in principle, especially if there are no special wishes about them. On the adjacent halves of the table, chamfers are removed, and then they are rigidly attached again with wooden dowels. Stumps for creating furniture are used in different ways. Firstly, after the cut down trees, stumps remain on the territory itself, which at any moment will “become” a chair or its likeness. But benches with tables are assembled from snags and sections of stumps. The tops of the stumps are decorated with mosaics. Wide ones are cut so that there is both a seat and a back. A croaker is placed on top of the stumps - the bench becomes usable.

How to care for wooden garden furniture

Wood actively responds to weather shocks, as well as to sudden changes in environmental conditions. After frequent rains combined with high temperature mold occurs. The scorching sun contributes to the fading of color, drying out wooden furniture, the formation of cracks. Periodic processing of all wooden surfaces will not cause difficulties. Care for different types of wood is almost the same, but the compositions are used only for a specific option. In any case, furniture is first washed from dirt, sometimes it is immediately wiped with vinegar to “drive out” pests. When everything dries, a special oil is applied to the tree - its own for each breed. The procedure is not required if the furniture is covered with paint. Sometimes a plaque forms on the surface of the tree - a wet wipe followed by the use of fine-grained sandpaper will solve the problem. Additionally, means are used to create a protective film.

In everyday life, a combination is often found wooden tabletop and metal legs. It makes no sense to change something in this combination. In the case of shops, sometimes they do it differently. IN design options with an abundance of technological forms, metal often "turns out" higher. The thickness of the seat is then made minimal so that it does not warm up unnecessarily in the sun. Furniture that is interesting in terms of geometry does not hurt to decorate it additionally. For example, interior lighting. Excellent combinations of wood and metal are found in the designs of gazebos, recreation areas, terraces. Combinations can be diluted with stone, glass, plastic, epoxy. A table with a metal mesh as a support under the countertop will not hurt to fill it with stones. In the garden, you should allocate an area for storing accessories such as shelving, and it is better to do it just the same with the use of metal and wood.

Washbasins are installed in the garden or on the lawn. Sometimes the material is a metal barrel, and the option looks better with a dark color and a matte texture. By the same principle, tables with compact tabletops and chairs with the same small seats are made. The “cherry on the cake” will be multi-colored metal barrels with cut out holes for seats and backs from the resulting fragments. Moreover, the products fit perfectly into a closed environment. Wooden barrels are used much more often. Parts for large and small furniture are cut out of them. Wine barrels become part of chairs, sofas, tables. Vases for large plants, a portable refrigerator or an ice tank are also great options for the warmer months. Even such an unremarkable device as a trash can is also sometimes made from a wooden barrel.

From cable reels

Coils from wire find a place in interesting design objects. From rounded boards, original chairs with round sides are assembled, resembling a rocking chair. Coils are sometimes cut to shape non-standard look. Stands and small tables are sometimes attached to the boards. The very shape of the spools "hints" at the possibility of being used as a tabletop and at the same time - the base of the table. A set of garden furniture can be assembled entirely from coils, and with a minimum number of cut parts. Then there will not be so many options for decoration, but any metal products that are mounted on a wooden surface will become decorations. A minimum of effort will be spent on assembling the pouffe. You only need to sand, polish and paint the drum, then cut out the fabric and prepare the filler. Furniture is brought to readiness with the help of furniture staplers.

From tyres/tires

Tire garden furniture is made in several ways. In one embodiment, the tires are connected without changing the shape. The second approach involves obtaining strips from blanks. Well, the last method is to cut the tires into different parts. An ordinary table is assembled from just 2 tires superimposed on each other and a tabletop made of wood or glass. One tire with a disc is enough to make a swing. If you assemble a partition with hangers and chains, then the tires on them will play the role of flowerpots. Tires are used to make original chairs. One technique involves using a cut ring to form the back and armrests. At the same time, the supporting legs and the back part of the backrest are formed from rigid semirings. The legs are placed on metal supports. The seat is made either from a round wooden board or from a plexus of rubber flaps.

Tires should be coated with a special flame retardant compound!

From PVC pipes

PVC pipes are a good option for high chairs. First of all, the elements themselves are studied in order to create an accurate installation drawing along with a mounting option. Separate pipes are prepared and, if necessary, cut. The frame is assembled with glue and fittings, if necessary - by soldering. Then they prepare the seat: a dense fabric option is suitable - for example, for a folding option. You will need to check the strength of the fastening of the seat with the frame. Pipes are painted up to final assembly. In most cases, it is better to leave the original color, especially since the external imperfections of furniture in an open space can be presented as an original solution. A PVC product is sometimes decorated with a decorative self-adhesive film. Originality will be added by painting, curly cuts. In addition to chairs, it doesn't hurt to try your hand at creating a swing. Then there will be even more options for decoration.

Conclusion

Garden furniture is called a wide range of items and auxiliary elements. Additional devices turn the square near the house from a simple garden into a place for receiving guests, relaxing, cooking, family pastime, sports games. People prefer to buy all these accessories in the store, and only a part tries to save money by doing everything with their own hands. Further opportunities for arranging the territory directly depend on one's own industriousness, so the second option deserves a more serious attitude. For work in summer cottages, wood, metal and PVC are often used. From the same raw materials make furniture for the garden or vegetable garden. Some things will have to be bought, but many will be at hand. Some materials will leave a whole "field" for implementation creativity. Popular ready-made options suitable for those who do not have enough experience or doubt when making decisions.

If you are tired of tasteless furniture made of plastic and chipboard, try to do it yourself original solutions from wood. What types of homemade headsets exist, and how to make them yourself, you can find out from our review. With proper care, do-it-yourself furniture made of wood will last no less than. Besides, homemade products will become an original decoration of any room and will give the interior individuality and uniqueness. And for making simple designs you will need an inexpensive material, which will also ensure the cost-effectiveness of the headset.

First of all, let's deal with the materials improvised designs. Wood does not necessarily have a high value. Quality furniture from wood at comfortable prices you can order in many stores. You can choose furniture options with your own hands from furniture panels. Such material can be of two types:

solid type shields made from a piece of wood, which are processed in a certain way;
compressed material obtained by pressing thin shields. In this case, particularly strong plates are obtained.

Making furniture from wood requires a special approach. In this case, it is important to choose the right wood. In this case, all species are divided into hard and soft wood. Hardwood types include apple, ash, beech, acacia and elm. They are used for the manufacture of frame structures and furniture designed for a significant load.

Soft breeds are juniper, pine, willow, fir. Decorative parts are made from this raw material, which are not used for increased loads.

When designing solid wood furniture with your own hands, special operating conditions must also be taken into account. For example, for rooms with increased wood with good performance moisture resistance. It could be cedar.

Unique products are made from wenge, meranti, mahogany and makore, such materials have a non-standard texture.

Masters often use the following varieties:

pine used for frame upholstered furniture and for decorative elements;

beech refers to reliable, but not resistant to moisture. Before use, it should be covered with protective solutions;

oak suitable for the production of massive pieces of furniture such as chests of drawers, or;

birch not a very strong breed, so it is used for small chairs.

It is also popular to make furniture with your own hands from improvised means. Demanded for work, logs or bars. An important point is the preparation of a suitable instrument. It will take electric jigsaw, and a drill.

You can build furniture with your own hands from chipboard. This is a budget material for simple products.

How wooden furniture is made: manufacturing processes

Before you get started, you should find out how the production of wood furniture is carried out. A complete process includes such departments as raw materials warehouse, workshop, assembly room, painting workshop, drying chamber and finished product warehouse.

Special equipment is used in production. Edge banding machines are used for edging. For linear planing of parts, you need jointers. Thicknessing machines are used by craftsmen for various milling. Milling units are suitable for working with flat elements. Grinding equipment performs grinding and calibration of workpieces.

Features of creating furniture with your own hands: drawings and diagrams

Making furniture with your own hands involves the following steps:

marking and sawing out elements;
processing of different elements;
drilling different holes for fasteners;
surface painting;
varnishing;
assembly of the structure.

By purchasing different fittings and suitable materials, you can create all kinds of furniture options with your own hands at home. Wooden products can have two types of connection: one-piece and detachable. The design consists of flat, volumetric and linear parts. Flat ones are shields made of rails and bars. Parts of one-piece type are used for door leaves or covers.

Any manufacture of furniture with your own hands should begin with the choice of the type and configuration of furniture. It is important to think about the accessories.

For work, you can purchase. At the same time, sawing and edging can be ordered on site. You can order cutting of any materials. The price depends on the density and thickness of the parts.

You can see interesting DIY furniture ideas on our website. Front parts are often made of MDF. Finished facades do not require processing. They can be immediately used in the manufacture of structures.

1 of 6

How to assemble a wooden table can be seen in the video below:

How to make simple wooden furniture with your own hands: photos - examples

Making furniture with your own hands from wood begins with a drawing. The diagram shows the required dimensions and drilling marks. Then you should prepare the material. The attachment points are a groove and a spike. Fasteners are made on metal corners. Special skill is required when. If you are new to carpentry, then first draw the boundaries of the carving.

An important stage is varnishing, grinding, painting, as well as applying patterns. Proper knowledge of technology will allow you to create original products. To decide how to make wooden furniture with your own hands, you need to choose the appropriate version of the product and drawings for its manufacture. Ideas from pallets can be viewed on the video:

To build tables or benches, you can take logs. Simple seats can be made from pillows or from wood. It is not uncommon to use hemp for seats and tables. You can assemble interesting compositions of garden furniture made of wood with your own hands using saw cuts.

Image	Stages of work
	Drawings are prepared first.
	Preparations are being made. The beam is sawn into certain parts. With the help of the supports for the seats are processed.
	Support elements are fixed to the upper parts. Connections are fastened with self-tapping screws.
	Seat boards are installed. Hats should be deepened.
	Legs are fixed

To make wooden garden furniture with your own hands, drawings and diagrams will help design the selected product. You can see the features of designing a bench for a garden here:

The nuances of making children's furniture from wood

When making children's furniture with your own hands from wood, certain requirements must be taken into account. Products must be environmentally friendly, convenient and safe. In addition, items must fit into the overall interior.

Pay attention to how the surfaces are treated. There should be no roughness and splinters. All products must be varnished and painted. It is better if the objects have rounded edges. Furniture should be easy to care for.

The best option for study, the manufacture of furniture in white or pastel colors. Consider the features of the manufacture of desks. This set consists of two parts. At the top is a table top. There is also a horizontal shelf along the length of the tabletop. MDF facades are used as working surfaces. The shelf with the tabletop is fixed to the desk box. You can also make a chair from the same material for the desk.

For your information! It is necessary to take into account the dimensions of the room. Furniture items should not interfere with movement and games. Also, all products must fit in size.

How to make wooden gazebo furniture with your own hands

Furniture is often made from wood. This material is easy to process, durable and environmentally friendly. For open spaces sets of table and chairs are used. Making a simple table is not that difficult. First, blanks are cut out, which are processed with varnish or paint. Then the countertop is assembled. In this case, the boards are fastened with transverse bars and screwed with self-tapping screws. After that, a support is made with a jumper and legs. The supports are attached to the tabletop.

When choosing options for garden furniture, it is worth considering the following features:

built-in or portable design. When choosing the built-in option, it is important to plan the distance between the table and the bench within 5-10 cm;
choice of material. Can be used combined option. For example, a frame part made of metal;
bench width;
product configurations.

Varieties of furniture for gazebos

Most often, they choose a table, a couple of benches or chairs. In order to decorate a small dining area, you can even use a cupboard. Convenient option rattan outdoor furniture. For convenience, pieces of furniture can be covered with pillows or other options for soft seats.

When choosing items for a gazebo headset, it is necessary to take into account its resistance to moisture, the sun, as well as to changes in high and low temperatures.

Do-it-yourself furniture options for summer cottages made of wood

You can make original country furniture with your own hands from wood. Photo examples allow you to see the most original ideas. A good option is the construction of willow twigs. Wicker products look elegant and do not clutter up the decor.

You can make interesting designs from pallets. These elements are used to create armchairs, sofas, tables and even. You can use folding structures that are easily removed when it gets cold and do not take up much space during storage.

Stationary benches and benches can become a real decoration of their summer cottage. When using sofas and benches added benefit there will be covers. With high-quality processing, the surface of the wood will become invulnerable to external factors.

How to make furniture in the bath with your own hands from wood

When creating furniture for or a bath, certain requirements must be taken into account. The material of the products must have low thermal conductivity, be safe and do not emit harmful components.

If resin is present in the wood, it can even cause burns. Therefore, it is worth choosing varieties deciduous trees. Cedar furniture is useful, as it releases essential oils when heated. For a steam room, attributes from linden or aspen are suitable. Such wood has a light shade, and is also resistant to moisture. In addition, linden has a pleasant smell, but is prone to the appearance of fungi. But aspen can darken over time.

Of the exotic varieties, abasha wood is popular. This tree is native to Africa. Its advantage is that it does not heat up and you cannot burn yourself about it. But this option will be very expensive.

There are certain options for bath furniture:

shelves are a mandatory attribute. It comes in different configurations, it is installed against the walls, it can be in the form of the letter P and G. You can also put special footrests and headrests in the steam room;

there are shops different shapes and dimensions;

stools are used as coasters for buckets, tubs and tubs;

hangers are used;

a table is set up in the rest room. Thermoses with tea and cups are put on it.

It is important to carefully process all the details so that the edges are rounded and the details are carefully sanded. Details are fastened with oak wedges, for which grooves are made. When using screws, the caps should be sunk to a depth of 5-6 mm.

When assembling bath furniture, all boards should be placed with a gap, and not close, which will solve the problem of water drainage. In this case, the wood will be better ventilated.

Wooden toy furniture options

Homemade toy furniture for children looks unusual. Such designs can exactly copy the original. It is not difficult to make kitchen furniture made of wood with your own hands. It is worth remembering that all details must be carefully processed, which is a guarantee of the safety of your child.

For the manufacture of such options, plywood is often used. This material is easy to process, harmless and durable. From such material, you can construct functional facades for a wooden kitchen with your own hands. Before making the product, you need to prepare detailed drawing and then make templates.

Here are the main manufacturing steps:

preparation of elements is carried out using a jigsaw;
all details must be cleaned;
assembly of finished parts is carried out using;
products are covered with different colorful coatings.

Article