Do-it-yourself cornice: a detailed description of how to design and decorate a stylish interior element (80 photos). Do-it-yourself cornices for a summer residence Make a wooden cornice with your own hands

It is difficult to imagine a modern home without curtains on the windows. Long and short, transmitting light and creating a cozy twilight, heavy and almost weightless - the curtains organically complement any interior. They are usually attached to cornices, which differ in device and material of manufacture. Often there are home-made cornices for curtains, especially in private village houses or summer cottages. Since the need to make a cornice with your own hands can also arise in a city apartment, it is better to know in advance what is useful for this.

Wooden cornices are quite durable and are often decorated with rich carvings. They are made from pine, beech, oak and redwoods.

Quality materials to get the job done

Improvised tools that can be used to make cornices: cuttings for garden tools, boards and their trimmings (for making sidewalls), parts of a metal pipe, wire remnants. Of course, plastic pipes are also suitable if their strength allows them to be used for such purposes.

You will also need:

nails;
self-tapping screws;
sandpaper or grinder;
saw;
roulette.

Cornice options

The easiest and fastest option to perform is a fishing line (wire) stretched between the studs. Above the window at the desired distance (equal to the width of the frame or a little more), 2 carnations are driven in. A fishing line is attached to one of them and stretched to the second, for which it twists. The curtain can be hung by threading the fishing line into a specially stitched “pocket” (the edge of the curtain is bent and sewn), or hung on any not too heavy clips or hooks.

There is another option for homemade cornices - a steel pipe or a piece of reinforcement. The edges of the pipe are treated with a grinder to get rid of irregularities. In addition, you can put tips on them, rubber is best, but plastic or wooden ones will do. Next, rings with clamps are put on the pipe, with which the curtain is attached.

Wood cornice

You can not ignore the most common option - a cornice made of wood.

For light curtains, you can even adapt a processed tree branch (it will look very original). Add another 10 cm to the desired length - to attach the cornice. Any stick or branch needs to be sanded - for smoothness. Then treat with varnish or wood paint.

Options 2 and 3 require wall mounting hardware. The easiest way is to use blanks cut from boards for this purpose.

The longest side is attached to the wall using self-tapping screws or special shelf mounts. The recess at the top serves as a support for the cornice. All corners can (sometimes even need to) be rounded - so they will look prettier. The diameter and radius of the recess must correspond to the same parameters of the handle (sticks, pipes).

Carrying out repair work in the room, many refuse to use popular blinds and leave familiar and such native curtains to everyone. In this case, the arrangement of the cornice plays an important role, both in the functional use of the structure and in the decorative position. Making a cornice with your own hands is becoming very fashionable, because it creates the opportunity to design a cornice in the most convenient way. For some, this is due to the cost of the goods, while others, on the contrary, doubt the quality of the purchased products. But often they resort to self-production of a cornice when there is no suitable option in the store, and custom-made production will be very expensive. Let's look at how to make this decorative element and how to dock it correctly.

Some information

Curtain rod

For those who want to know what a cornice is, I will say this: the device of the cornice implies a certain support that is capable of holding a certain weight. It is installed for both windows and roofs.

When choosing curtain rods for windows, you should pay attention to the overall design of the room, because all the details in the room must be combined with each other. Cornices can be:

Plastic - suitable for heavy curtains
Multi-row - their use is necessary where it is decided to use multi-layer curtains
Wooden ones are round cornices that we are all used to. They are considered classics and are suitable for any curtains.
Metal - serve as both decoration and holders for curtains and tulle

As you can see, there are a lot of varieties of supports and you will undoubtedly have options from which you can choose the best one for your interior. However, today I am focusing on making it with my own hands, because it will not be so difficult to make such a mount yourself.

String cornice and its manufacture

Do-it-yourself string cornice in the room

This option is boldly called the cheapest and, unfortunately, it does not always fit into the overall interior. But since it is still in demand, you can use various materials that improve the appearance of the entire cornice. For example, using a decorative strip, you can hide the string base.

You can install such a bar in 2 ways: in the first, it is enough to assemble the entire structure together, and in the second, fix the decorative bar already on top of the installed cornice. Use laminated chipboard for the plank, the width of which will be at least 10-15 centimeters - select the length according to the dimensions of your support. You should always take the material with a small margin, in which case the excess is very easily removed with a hacksaw. The appearance of the resulting bar depends only on you - some make beautiful carvings on it, while others simply paint and varnish it. But I found another interesting option using self-adhesive film. At the moment, there are many imitations and colors of this material, so you can choose a film for any design, and wood imitation will make the cornice even more attractive.

string cornice

When the decorative strip is ready, it remains to make the cornice itself. With the help of a string base and screwed corners, which have a rectangular shape with wall fixation, it becomes possible to dismantle the support if necessary.

Important! Ease of manufacture allows you to equip cornices with your own hands very quickly and without much cost. With the help of decoration with a decorative strip, not only the string device is hidden, but also possible flaws on the wall. The only drawback is that the cornice will not be able to hold heavy curtains or curtains.

Plastic pipe holder

This method was invented not only for beginners, but also for lazy people. You can spend very little time on the manufacture of such a cornice and its installation. A plastic pipe cornice can be used for any room, but it is best suited for summer cottages or for temporarily holding curtains.

You can use such a cornice for light curtains and curtains on rings or hinges. Select the number of pipes according to the number of valves. Do not forget about additional elements, such as holders. If you need high-quality and long-term fixation, then it is better to use screws and a drill, but it is better to use liquid nails for temporary cornices. Do-it-yourself making is very simple, because it is enough to install holders on the wall, into which then insert a plastic pipe. Self-adhesive film or other accessories are also suitable for decorative design.

The problem I encountered after making the cornice

The fact is that any repair must be carried out with high quality. Even if it takes place in the country. I was faced not only with the problem of making curtain rods, but also with how the well-known joining of the ceiling cornice in the corners takes place. Only we are used to calling it not a cornice, but a ceiling plinth.

I might not have noticed this "fear" that I had in my room from a previous renovation, but the installation of a curtain support made me pay attention to it. For those to whom it may seem difficult to join skirting boards with their own hands, there are well-known decorative corners. Of course, you will have to spend money on them, but they will make it easier for you to cut the plinth with your own hands. You can dock the plinth thanks to the following elements:

Connections for internal corners
For outside corner
Connecting element

Important! To cut the plinth at the desired angle, you must use a miter box. However, do not forget that not all angles in the room can be equal to 90 degrees. And therefore, it will be necessary to finally adjust the angle already in place.

The miter box allows you to cut the plinth at the most common angle, because it is necessary to join at 45, 60 and 90 degrees. When cutting, do not press hard on the material, as the cut line may be damaged. If you use a clerical knife, then it must be sharp.

Results

Do-it-yourself cornice installation

Designing and creating a curtain rod for curtains with your own hands is a troublesome task. However, in some cases, it may be the only right decision, since getting to the hardware store may not allow time, money, or your location. If you turn on the fantasy during the manufacture of the cornice, you can get not only a high-quality curtain holder, but also a wonderful decorative element. Viewing various photos, videos and master classes will allow you to more accurately analyze the technology of independent production. Always choose the option of a curtain rod based on the weight of the material that it will hold, because there are holders that are not able to withstand strong impact. If you are not afraid to make holes in the wall, then it is always better to use strong fasteners, and leave the glue option as a last resort. Do not be afraid to do something new with your own hands, and if you are already worried, then practice on those materials that you do not mind throwing away. Only a serious approach to work using good materials and tools will allow you to perform all repair and decorative processes on your own.

Some owners, when creating decor for window openings, prefer to design a cornice with their own hands. This is due to several factors. Some do not trust the quality of finished products, others are not satisfied with their price. Someone needs a special model that you can’t find in a store, and ordering from a master is quite expensive. A variety of detailed master classes allows you to get acquainted with the basic recommendations and carry out work at the proper level. Today, at home, you can make not only traditional string cornices, but also holders for Japanese curtains, plastic rod options.

How to make a traditional string cornice?

String or cable curtain rods are the cheapest option for attaching fabric sheets. Unfortunately, such a solution looks quite cheap, so it does not always fit into the interior. There is a simple way out of the situation - a decorative bar is made for the string base, which completely covers the functional part. The approach can be used both when installing the system and when improving an existing structure. The only difference is that with the first option, the entire system is first assembled and then attached to the ceiling or wall. In the second option, work is carried out on the manufacture of a bar, which is simply mounted on top of an already existing unaesthetic cornice.

To manufacture the product, you will need a cut of a chipboard sheet of the desired length, from 10 to 15 cm wide, about 1.5 cm thick. The advantages of this material are that, if necessary, it can be shortened with a hacksaw or lengthened by fixing an additional part with glue and metal brackets. It is worth considering that this can only be done if the part is used only for a decorative purpose.

When the cut of the required dimensions is selected, work begins on its appearance. When using high-quality wood, beautiful carvings can be applied. If you do not want difficulties, painting or varnishing will be enough.

Today there is a wide choice of decorative self-adhesive films that can radically change the appearance of the cornice. Such elements are inexpensive, and as a result, you can achieve design for expensive wood or even metal.

At the last stage, the cornice itself is constructed. If necessary, a string base is fixed to it, after which two or three rectangular metal corners with holes for hanging on nails or self-tapping screws are screwed. The location of the corners depends on the type of fastening of the product. With wall fixation, it remains possible to remove the part if necessary.

The positive side of the method is its simplicity and the fact that the decorative strip can hide not only the ugly base of the cornice, but also visible defects in the wall. On the other hand, when approaching, strings are most often used, on which heavy curtains and multilayer curtain structures cannot be hung.

Production of the simplest plastic pipe cornice

For a kitchen or similar household premises, you can independently make a simple and original cornice from plastic pipes. It is ideal for light curtains on rings, loops or grommets. True, this is a temporary solution, but it is perfect for giving.

To carry out the work, you will need only a few pipes (depending on the number of wings), special holders and accessories for fastening structures. You can use screws and a drill for high-quality fixation, after which holes will remain in the frame, or liquid nails that will not leave marks, but will not last so long.

An ideal option for curtains for this cornice would be the hourglass design. It is very simple to make it - you just need to fix the cornices on the upper and lower sections of the sash, stretch the canvas and pull it in the center.

This option can be called work for the lazy: the whole process takes only a few minutes and does not require complex manipulations. It is only necessary to cut the plastic pipes into pieces of the desired length, fix the holders on the wall with screws or an adhesive base, insert the pipes into them. When using glue, it is recommended to first supplement the fixation with ordinary adhesive tape, which is removed after the base has dried.

Creating a cornice for Japanese curtains and the rules for its installation

The most difficult process in the manufacture of homemade elements is the assembly of cornices for Japanese curtains. The best option is to purchase a finished product with all the guides to which you can make a curtain frame, but with a strong desire, you can also make a cornice yourself.

The very design of Japanese panels, consisting of stretched fabric sheets, will look attractive only with the correct installation of the guides, rigid fixation of the grooves and the absence of the possibility of scrolling the elements around its axis. This is achieved through the use of quality materials and specific complementary products.

The eaves for Japanese panel curtains can be plastic or aluminum. Each section is intended for a separate curtain and has a basis for fixing Velcro, on which fabric webs are attached. If you make the design yourself, you can use a double-sided fabric with Velcro on both sides. This will allow you to change the appearance of the room depending on the mood.

The master must think over the number of tracks in advance: it is very problematic to mount additional parts in such systems. There are basic elements that allow you to install not one, but several guides on one track, which will keep the width of the structure small and significantly save free space.

To fix the panels of Japanese curtains, there are several options for the location of parts, which provides a variety of decorative solutions, but can significantly complicate the work of a home master. You need to think in advance how to manage the system. In case of refusal of direct manual control, a special cane is mounted. If there is a need for an electronics device, it is recommended to contact professionals. The slightest inaccuracy in the setting will lead to the fact that any movement of the panels will turn into a complex and painful process.

In the production of eaves for Japanese curtains, you cannot use standard systems; in any case, you will have to purchase specific profiles. As practice shows, independent production of such products is not always cheaper than buying a finished model and its professional installation. It is better to pay once than to call the masters later to dismantle the structure, adjust it and reinstall it.

Conclusion

Designing, creating and installing a homemade cornice is a laborious process, but if all the rules are followed, the result of the work will exceed all expectations. Not every owner can boast of an original product in the decor of his home, so such touches are always highly valued.

Designers remind you not to focus only on the functional side of the issue. Thanks to the abundance of accessories, even the simplest product can be decorated in accordance with the basic style of the room and emphasize its uniqueness.

As for Japanese panel curtains, it is better to trust the masters here, especially since, in the light of growing competition, the cost of such work is no longer so high.

When decorating the interior of an apartment, every detail, every little thing is important. One bad touch can spoil the whole look, and often curtain rods that do not match the overall design of the room act as such a factor. Making this piece of furniture to order is quite an expensive pleasure.

Therefore, it is not surprising that many owners prefer to make curtain rods for curtains with their own hands, since today there is more than enough consumable material for them. You can purchase accessories for the cornice and simply assemble the necessary design, suitable in size and appearance. And you can make a product almost from scratch.

The main types of curtain rods

There are several signs by which cornices can be classified: by type, material of manufacture, installation location and number of rows:

Cornices can be both wall-mounted and ceiling-mounted. If earlier, as a rule, the first option was used, then more and more preference is given to structures with ceiling mounting. This point is due to the fact that wall cornices are less reliable and, under the weight of heavy curtains, often break off over time.

Also, the division can be carried out according to the number of rows required for curtains. Today, designers often use multi-layer compositions on windows as a decorative element. Therefore, today you can often find cornices in several rows of the most diverse designs.

According to the type of construction, there are:

The most common option is a string cornice. The essence of this design lies in the fact that the curtains move along stretched strings, which are preferable to hide with a decorative strip.
The tubular cornice has also been used for a long time and has been familiar to many since childhood. Two mounts and a pipe inserted into them has only one quality flaw. Over time, the surface of the holder loses its smoothness and the rings on which the curtain is held begin to move poorly.

Baguette cornice is a more modern version of this piece of furniture. It is a profile with grooves, usually fixed on the ceiling, and in some cases on the wall.

In addition, cornices can be made from a variety of materials: wood, metal or plastic. And each raw material has its advantages and disadvantages.

Metal curtain rod: simple execution of a complex design

Metal curtain rods are mainly used for heavy curtains and multi-row compositions. And this implies a rather complex design of the eaves. However, everything is not as difficult as it seems. It is not at all necessary to purchase an expensive metal curtain rod model. You just need to choose the right ordinary metal profile, buy hooks and attach the structure to the ceiling. In this case, the number of stripes in the profile must correspond to the number of expected rows of curtains. By the way, this option is perfect for Japanese-style curtains.

A tubular cornice can also be made of metal. As is clear, this will require an aluminum or stainless steel pipe of suitable diameter and brackets for its fastening. Or a metal bar, on which plugs are subsequently placed along the edges, for example, from wooden door handles.

Polyurethane cornice: design of non-standard window openings

Plastic cornices are best used for light curtains, as this material is unlikely to be able to withstand too much load. The most common option is a tubular cornice, because finding material and brackets for it is quite simple (for example, in a plumbing store). Also, such products include a cornice made of polyurethane, a material that has higher performance characteristics than all other polymers:

Like any plastic, polyurethane is absolutely indifferent to water, so its use in rooms such as a bath or a bathroom is more than justified.

Also, the material is lightweight, high strength (a cornice made of this raw material can withstand a load of up to 50 kg) and is resistant to high temperatures. Such properties make it possible to use a polyurethane cornice in almost any conditions and easily attach it to a variety of bases, including drywall structures.
In order to install such a cornice, you only need a polyurethane profile and hooks hanging on it. At the same time, the high flexibility of the material allows you to give it absolutely any shape.

Most often, polyurethane cornices are used for curtains in the bathroom and for decorating windows in bay windows.

Cornice for curtains made of wood: a new look at familiar things

Today, antique-styled decorative elements are increasingly returning to the interior. Was no exception and the eaves for curtains made of wood. As a rule, wood is used to create decorative strips for one of the types of construction.

It is quite easy to make such a product, while you can decorate it at your discretion:

From a sheet of laminated chipboard, a plank is cut out with a length of a cornice and a width of approximately 15 cm, which is subsequently painted or pasted over with a self-adhesive film of the color you like.
If the chipboard sheet does not allow cutting the bar of the required length, it can always be extended. For this, as a rule, thick PVA glue and furniture brackets are used.
Attach the bar to the ceiling on metal corners. Inside the structure, as a rule, strings are installed in one or more rows.

Or you can use another option for a wooden cornice. To do this, you need to choose a suitable ... stick. Sand it, sand it and insert it into wooden brackets, which, with some experience, can also be made independently. As a result, you will get an original cornice, which no one else has!

Plasterboard curtain rod - an element of a modern interior

Making a curtain rod for drywall curtains is a more difficult task than previous options. This will require some skill in working with building materials and tools. As a matter of fact, we will not even talk about the cornice itself, but about a niche in which one of the models can be installed:

The design itself is a kind of box in which spotlights can be built in for additional lighting.
As a rule, a niche is made in the case of a stretch or false ceiling.

The main purpose of this design is to hide the cornice and the top of the curtains from prying eyes, so they make it along the width of the window opening or along the entire wall adjacent to it.

Please note that it is necessary to mount such a niche for the eaves at the stage of manufacturing the ceiling itself, since subsequently it is extremely difficult to perform such work.

As you can see, there are enough options for making curtain rods for curtains with your own hands, both simple and more complex. It is worth showing a little imagination and making quite a bit of effort and a new original piece of furniture will decorate your home!

interiorno.ru

Wooden cornices are quite durable and are often decorated with rich carvings. They are made from pine, beech, oak and redwoods.

Quality materials to get the job done

You will also need:

nails;
self-tapping screws;
sandpaper or grinder;
saw;
roulette.

Cornice options

Do-it-yourself wooden cornice scheme.

The easiest and fastest option to perform is a fishing line (wire) stretched between studs. Above the window at the desired distance (equal to the width of the frame or a little more), 2 carnations are driven in. A fishing line is attached to one of them and stretched to the second, for which it twists. The curtain can be hung by threading the fishing line into a specially stitched "pocket" (the edge of the curtain is bent and sewn), or hung on any not too heavy clips or hooks.

Wood cornice

You can not ignore the most common option - a cornice made of wood.

Options 2 and 3 require wall mounting hardware. The easiest way is to use blanks cut from boards for this purpose.

Attach the workpiece to the wall, insert the eaves into the grooves, hook the curtains onto it with the help of rings, ties, hooks.

Such homemade products are very simple to perform, with due effort they look no worse than store cornices. The cost of making them is minimal. A home-made cornice is ideal for a country house, a summer residence, as a temporary accessory when repairing an apartment.

1pooknam.ru

How to make original cornices for a summer residence?

uznamania.ru

Is it possible to make a cornice for traditional or Japanese curtains with your own hands?

How to make a traditional string cornice?

Today there is a wide choice of decorative self-adhesive films that can radically change the appearance of the cornice. Such elements are inexpensive, and as a result, you can achieve design for expensive wood or even metal.

Production of the simplest plastic pipe cornice

An ideal option for curtains for this cornice would be the hourglass design. It is very simple to make it - you just need to fix the cornices on the upper and lower sections of the sash, stretch the canvas and pull it in the center.

Creating a cornice for Japanese curtains and the rules for its installation

The master must think over the number of tracks in advance: it is very problematic to mount additional parts in such systems. There are basic elements that allow you to install not one, but several guides on one track, which will keep the width of the structure small and significantly save free space.

After repairing the water supply, many have extra pieces of plastic pipes. They can be used to make various crafts and household items. Today I will talk about how to make a cornice from plastic pipes.

After the repair, I needed a temporary cornice in one of the rooms. There are many different materials. Using creative thinking, I came up with the idea of making a cornice from the remnants of a plastic pipe.

materials

Remains of plastic pipes.
Holders for pipes.
Glue or liquid nails (if you don't want to make holes in the frame).
Screws and a drill (if you are not afraid to drill the frame).

Embodiment

I planned to hang hourglass curtains on such a curtain rod. The idea was to do something similar.

The beauty of such a cornice is that practically nothing had to be made or painted. Photo holders for pipes, they are different in size, depending on the diameter of the pipe. Pipes are easily attached and removed from such holders.

The pipes and holders were white, I just cut them to the desired length with a hacksaw.

Since I needed a temporary solution to the problem, I did not drill the frame, but simply glued the holders (I fixed it with adhesive tape for the glue to set). Such holders can be mounted on a frame or wall with screws.

Unfortunately, there are no photos left with the finished curtain. But I think the idea is clear.

Curtains can be anything. You can use these cornices not only for windows, but also for doors or glass cabinet doors.