Small wooden bench bench shape. Garden bench for giving with your own hands: Six projects for every taste

A light and comfortable garden bench can be put on a cozy veranda or arrange it in the shade of trees so that you can hide from the heat and enjoy reading a book or a pleasant conversation. So, we describe the main stages of its manufacture.

Of which material you did not decide to make a bench, so that it is as convenient as possible, with its construction, certain proportions should be observed:

height: The seat is always located at the level of 0.5 m from the ground;
width: at least half a meter;
back Height: 0.45 m;
the angle of its tilt: the perfect 45 °;
the height of the armrests: calculated from the level of the seat and should be equal to 20 cm.

If the bench is bamped into the ground, the length of the legs increases at least 70 cm. In this case, its legs are lowered into the prepared pits, they fall asleep with stones and poured concrete. Do not forget to prepare wood with a solution that protects against rot and mold.

Bench with your own hands step by step

The back and seat of the garden bench is better to perform not a solid cloth, but to make a small distance between the planks. In this case, the rainwater will be completely flushed with them, the boards - it is better to blow out, and the product will be less susceptible to rotting:

Replace the veil can be a strong mortar of manganese. A tree treated with such a composition becomes dark and rich color. Depending on the number of manganese, you can get a shade of a nut or a saturated color of a mahogany.

Bench of wide boards

Bench of flexible grape vines or IV roths

Eco-friendly garden furniture, and not only a bench, but also a chair and even a table can be made of pre-divesed prucks of willow or vines. You can also use nut branches, willow, aspen or even birch, but in the last cases the product will last much less, and it will look more rude.

To collect raw materials, it will be necessary to wait for the time of "maturation" of shoots. The optimal branch blank season - from September to March. It is at this time that the rods acquire the required flexibility:

Types of beam

We described only the simplest options for manufacturing a garden bench. You can make it practical from any materials:

If you are planning to make a wooden street bench, it is better to use coniferous rocks or larch, poorly praised. The oldest furniture from oak or nuts remain inherited as a material to create a solid and very original garden product.

Should I buy a bench or still make it yourself?

Buy a bench for the garden, of course, is much easier. Moreover, the simplest of them cost enough cheaply.

But still work performed by your own hands will bring more satisfaction. And with a certain patience and skill, even made of primary means, it can become exclusive work, which will not be ashamed to boast of friends and neighbors. For example, the next photo of the bench is made of conventional pallets painted with bright paint and decorated with decorative pillows.

Good afternoon, today we will do a variety of benches with your own hands. I collected this article all simple ways Make a comfortable and beautiful bench itself. I will give detailed explanations and demonstration photos, and I will tell you the most clearly on how to make a bench from wood (timber and boards) and protective materials (pallet pallets, old chairs, boxes and other). I will also give drawings, assembly schemes, and step-by-step master classes.

All collected models of country benches I will post as they are difficulty - that is, we will begin with the easiest and simple and concise ways - and finish real professional products worthy of the hands of the master. After this article, you will feel that they have become a master who knows a lot about and easily make a bench completely from any material, even if it is a bit. And the bench will be firmly standing on their legs and years will serve your family. And how to know, maybe you can even sell your benches to the neighbors - because they also want to have such country shops on their plot. And later you will begin to do and also according to my lessons.

In this article, as well as in the following article of this cycle, we will look at ...

Benches made from old chairs.
Bench goat in french style
Beautiful manufacturer benches from bed backs.
Master class of an elite bench from the chest.
Country benches with back - from bar and foam blocks.
Benches for summer cottages - Shield opported for whole sidewall.
Simple drawing Cutting benches - in 15 minutes.
Cutter benches with curved side part.
Rack benchesfor giving - with a curved shape of the seat.
Bench benches with backrest and armrests - 23 models.
Benches under a canopy or classic pergola.

So let's be able to understand. And let's start with the easiest ways to make a summer bench with your own hands.

Model number 1.

Bench for dacha

From old chairs.

Here in the photo below we see the original and very simple bench - which is easy to make with your own hands from unnecessary chairs. Everyone at the cottage has old slim chairs. Once you left one chair in the rain, the lacquer coating was swollen on them, the soft upholstery had long mounted on the shaggy holes. Throw out a pity, you put it at the wall of the garage or in the Saraike - and he continues to wind. Then another friend's friend added to him - but he is still nothing, and you keep it on a summer veranda. And sometimes cutting chairs with a peasive leg you see at the entrance (someone delivered on the trash).

All these old men can give a new youth life. Paint them in a joyful juicy color. And cover with a wide board - to fasten into the screws (so that they keep behind the noise of the bottom of the chair, it can be strengthened with a wooden lining). Or fasten not to the bottom and to the chairs frame.

By the way, if you do not have old chairs - not trouble. Go to any site-flea market, - there is very part selling old chairs for the living pennies. They are joy that they sold. You happiness - what they found.

If wooden chairs will have a different seat height - it is easily solved by making legs to the high chairs (or stuffing on the frame of a low chair of an additional thick fortune to raise the seat at the desired height.)

Chairs can be connected not only in the zone of the seat - but also along their backs. Here on the step-by-step master class of manufacturing such a bench (photo below) we see how it is done:

Mounting nodes on the rear line of the seat - a long wooden plank.
Fastening nodes on the front line of the seat - screed screws (or just a bunch, which is kept due to the fact that the back plank does not give the chairs to disperse).

Select the side handrails benches. Drink corner Pazik On the handwheel, so that he entered the back of the stool.

Okrew the lacquer coating from the chairs (we prepare them to paint). Ground before painting - special primer for wood. We impregnate moisture-resistant coating.

And attention - add elements of strength. From the bottom and on top between the backs of the chairs - you feed short wooden planks-holders. They combine the backs of the chairs - into a single overall back of the country bench.

Cut the seat chamber. Please note that there are special square drives in it (so that the high "robes" of the legs of the chair passed through them.

Here we have the elegant garden bench. It can be put on the lawn of the garden in a place with a table - under a canopy, in the recreation area, on the veranda or terrass. And for the winter and the rainy season to enter the house.

But the idea of \u200b\u200bhow it is possible to place the chairs for our future bench for the cottage - with a rounding.

And you can make a round garden bench around your beloved tree or a lilac bush on your dacha - also from the chairs of the backrest.

Even if you found only 2 chairs on the flea market - you can do the original bench with them - which will only have you.

Moreover, one exclusive idea is still hiding here - just for two chairs.

Here in the photo below we see how exactly the two old chairs can make your own hands french bench-goat.

On the photo scheme below below, we see the master class - where it is shown as two backs from the chairs - become the side elements of the frame of the garden benches.

First do it quadrangular Frame for Seat (Light tree in the photo below) - Another scientific is called the Tsargi (frame elements under the chair, or under the tabletop of the table). You feed this CARD Frame to the lower straps of the chair back.
And then so that our bench does not shut there, and make an additional rama-tie Already at the bottom of the legs of the future bells. According to scientific, such a frame-screed at the bottom of the legs is called the Prede Frame.
Mobile All product is white and get a whole French bench for a beautiful holiday at the cottage.

If you wish, you can attach a back to such a garden shop-goat. Just beaten to the side surface of the chalk board. How it is done in the photo below.

Model number 2.

Country benches

From the old bed.

But ways to create a beautiful bench for giving using the backs from the old bed.

One back is poured as it is in half. Halves will be used as side elements of the country benches.

Even if the back of your bed is not made from a solid shield, but decorated with carved bassines - you can still make a bench according to this scheme.

Side can be covered with a solid wooden shield. Or wreating boards-slats as in the photo below.

The second back of bed can be used under the foot bench - From the facade edge. How it is done in the photo below. The bottom frame of the benches can be simply cooled by a edged plane board and paint. And you can cut one-piece shield and put it on top on the frame.

You can use only one back to create a bench.

You can make a fresh frame from the edged board under the dacha bench.

Or a frame for a seat - a CARG frame bench - can be taken from the same material as a skeleton frame of bed. How it is done in the photo below.

And pay attention. Here, part of the skeleton of the bed is stuffed from above - to increase the level of the seat.

Beautiful summer bench can be made even using modules from any other furniture. For example, from the old buffet. Suppose you have a buffet part of which is not subject to restoration (drunk guests fell and broke the line of drawers).

Then the fate itself suggests you from it an exclusive bench. It is unusual to beat the remaining part of the buffet. And create a cozy corner for family privacy.

And you will not want to set such a designer bench for rain. You will find her honorable place in your country house. And a blue pads with an embroidery of snow-white patterns for it.

Model number 3.

Shield garden benches

Do it yourself.

In order to immediately explain the term "shield". Sign by this simple design - a mini-shop from cutting kitchen boards. This is the classic shield design bench. That is, the product is collected from one-piece shields.

In the photo below the shields are connected by a groove manner. Board sidewindes in the grooves on legs-racks.

Here, the bench is made in the same way - the shield method. Only shield material is more rude and stove. And here they added a back - it was embedded in the grooves, chopped in the support panels.

Fastening the shields to each other may be a groove (as in the photo above) - where in some shields pubs are cut down, and other shields in the bottom enter. Such fasteners are used only in shields made from a solid piece of wood. The glued shields are not suitable for this - they can cut down in places of their gluing.
Also, additional fasteners are used for attachment - wooden(Tsargi, corner bodies, progs), metal (corners, brackets and perforated plates).

Rustic shops are made. 2 side shields (these are legs) - a long board is connected together (this is Prix). The board can be placed at the bottom of the cross, or at the top of the cross-line - immediately under the seat board. In the photo below, we see both of these ways to locate.

As you understood the shields you work with, the right shape should be required. It may be a wreckage of an old board whip - in which you cut out flat Lines Supports for Sitting and backs.

In the photo below, a solid shield plays the role of support and for the seat board and for the backrest board.

Here the same principle is a solid support for the seat and the backs of the country bench.

And this beautiful white bench for giving is made by the same principle. Only already from exactly bought shields and painted.

Here we see the shield model of the bench's bench, where already 2 shields play the role of support for the seat and backs.

And these support side panels are made at a slight angle of inclination. And so the bench got a seat with a slope of deep into and slightly thrown back. Very convenient to sit in such a bench.

And you agree to do, cut this bench with your own hands very easy. Here the drawing is not obliged to be accurate.Just do in your soul. Easy the angle of the nasklock of the sideways Choose an eye.

Side backrest - in the form of a long triangle (choose angle ourselves).
A foot support for the seat - in the form of an elongated trapezium (you can with a flap of or without).
Under the foot supports, a segment of a thick bar is drunk - so that the bench is height. But if you have a wide board, then the legs will turn out to be higher at the bench, then you can and without barous supports

All items can be placed on ordinary nails.

To the bench is not so low (If you wish) you can make the foot bars higher - to stick together several segments of the bar - put them on each other with a turret and fasten with the inside of the board (so that everything together) or without a board just on nails.

And also such a bench can be put on legs - also in the form of elongated trapezoids. Available from the inside of the sideways.

Shields for benches can be shot down (that is, not solid, but consisting of their boards closed with each other pericing plank). A simple dacha bench with a photo below just demonstrates this method.

And this garden bench made of thick boards is also done on the same principle.

Model number 4.

Cutting benches

Do it yourself to do in the country.

But another simple model of the country benches. She is not only easy to constructive - but also in the material. From one long edged board, you can make such a garden bench quickly and just with your own hands.

It can be supplemented with armrests, cover the noble dark vest, or paint bright juicy color.

From the side sides of the country's benches of this type, you can make a book under books, pivasik, those things with whom you love to relax in the country.

Let's look at the drawing of this country bench. We see that all corners of the planning of the board have a slope of 30 or 60 degrees. Dimensions in the drawing are indicated in inches. One inch is 2.54 cm.

We see the drawing from the side. The length of the back and seats - on your choice.

Cut the board to the segments we need. And we collect a bench on bolts, screws or nails.

To such a bench in the country, you can make a table for provisions. Or ordinary panel shop.

Model number 5.

Shield benches for giving

With a curved side shield.

Shields that you cut for the sidewalls of your Bench to the country can have smooth round lines. Then the bench can be a real work of art - your creative work.

The seat in such a bench holds on the planks stuffed under it from the inside of the sidewall.

The back rests down at the bottom - on the same bar as the seat, and at the top on the bar navigate vertically along the spin part of the curved sidewols.

Boards of which you cut out the curly sideline can be treated along the edge, giving it roundness and smoothness (left photo below).

And more curly sidewalls can be cut not from a regular shield And from a joinery with a terrain - the front part of the cabinet or an old viper door. Even the door handle can not be removed - but leave for beauty (on the right photo benches below).

Model number 6.

Cutting bench for cottage

How to make with your own hands.

And from carved sidewols, you can make an interesting rack of benches. They have a round seat with smooth outlines and a curved backrest line.

In the photo below, we see just such a convenient bench for giving.

The bench swelling is obtained due to the fact that narrow rails are fought on a bending perimeter of figured side parts.

In the photo below, we see a master class of manufacturing such a bench for giving. In order for the rails not beyond the weight of a sitting man - for such a bench, another skeleton figured element is made - by Entra. All three details are connected together into one common frame - just putting them on the slopes of the lower ridges (as in the photo below).

And then on this frame on its upper perimeter - stuff on the rails of the rails.

If you want such a bench is longer, then you just need to make not three curly models of the frame - and four, or five, or six. Well, of course, printed rails should also be long.

Model number 7.

Fast bench -

from foam blocks with cavity.

Foam blocks (or gas-silicate blocks) sometimes manufactured with through holes inside. This is done to save material and also to enhance the heat shielding properties of such a building material.

And we can use this "holey" feature of gas-silicate blocks - in the good purpose of creating a bench for the cottage.

To do this, we install 2 two rows of foam blocks down holes down, and put more foam blocks on the holes. And in these holes insert the suitable sections. To make it easier to sit upstairs, you can leave the pillow pillows. It is better to choose those that are covered with a waterproof cloth. Or sew themselves from the loaf and thick foam (sold in Khozmagach and Stroymagas).

You can simply score the cover from the boards into the solid one - so that the flat seat without holes it happens.

And the foam blocks are good to cover the usual paint - to get a bright beautiful bench.

These are the ideas for the manufacture of country benches with their own hands. But this is not all the models of wooden benches of which I would like to tell you. Therefore, wait for the continuation - we will make interesting benches from the tree (timber, boards and logs).

On this, your professional growth will not end ...

You will see how it is simple and quickly make a real structure with your own hands - a large summer gazebo. How to install pillars, like (without any building education) to make a roof, how to cover its roof (polycarbonate, slate, tile). Stay with our "family handy" - and we will give you "Golden Handles".

Successful to you dacha construction.

Olga Klishevskaya, especially for the site

If a you liked this article
And you want to thank for this painstaking work of our free author,
then you can send any sufficient amount
on the his personal Purse poison - 410012568032614

After hitting the official website for the first time on Casino x, you accurately remember this site on its unique design and the large selection of promotional proposals. Experienced gamblers who know the felt in the game software, with joy become the guests of the resource. There is everything you need for a comfortable game: licensed devices, bonuses, high level of service. This is a serious long-term project that is successfully advertised on the Internet and gives a real opportunity not only to break the Kush, but also withdraw honored winnings without any difficulties.

Virtual slot machines Casino X of any genres

All professional resources that make a casino X review, mark it a very impressive gaming assortment. You will find more than 450 slots from more than 30 providers. The main part is the development of NETENT and Microgaming. Basically, it is five-drum simulators of all sorts of genres: fantasy, history, plots from films and legends, fictional stories, sports, animals, treasures and, of course, fruit classics. For convenience, the top online machine guns are collected in a special section. You are waiting for interesting game mechanics:

freebies;
cash bonuses;
multiplication of awards;
special symbols;
drives and multipliers.

On the official website

The web resource also paid attention to desktop entertainment and Live categories. For moving to paid rates, you need to start a profile in the system. As soon as fast registration passed, the player can replenish the account of his account. Immediately after that, you can proceed to the game on the most sought-after slot machines. Most of the devices are adapted to sensory control gadgets. On the Casino smartphone x, the mobile version is slightly different from the format on the computer. There are no functional differences: you just manage your bank and bets as on a personal computer.

Free Casino Mode X Online

Clubs Club do not have to search, where to download automata for permanent access to demomm. The browser version of the portal works around the clock, as well as its technical support. The site is sometimes updated to better meet modern quality standards. All casino guests play for free without registration can be connected to the smartphone, tablet or computer to the Internet. It is enough to click on your interesting video slippers and start a test game in Demo Coins. The results of such spins or betting at the table of roulette, the poker will not affect the real balance sheet.

Access without restrictions on casino x Official site

If for some reason Casino x the full version does not open up the address you have familiar to you - this problem is easily solved due to alternative copies. For each client and a simple guest, the mirror today serves the most convenient way to enter your office and on a page with slot machines. You are waiting for the same licensing software with a complete guarantee of particular algorithms. You will never lose your status and balance on the balance, as additional addresses with a similar interface and bonus capabilities are constantly added to the network.

The bench is characterized by functionality and allows you to supplement the garden. It is usually not used for classic types of gardens, because there is no need for it.

On this site, you can only see the beds and growing potatoes, tomatoes, cucumbers and other useful cultures. And when it comes to the garden, let them and not particularly extensive, then it becomes clear that it is difficult to organize it with high quality without the use of benches.

Since the garden is created for other purposes, it is necessary for rest and draining with a natural atmosphere.

Modern designers learned how to create different versions of structures for such purposes. However, wooden and benches collected from metal are considered the most popular.

Types of benches for garden use

Any selected design option for a bench or its size should serve as one goal - the formation of a person's rest space. Its form assumes the possibility of convenient placement for a long time.

The classification of similar products may occur based on a number of features. Usually they are associated with the type of material used to assemble a bench.

What materials are most often used?

In fact, their mass, however, can be dwelling on the most popular of them. Most often use:

Plastic, since the benches created on its basis differ resistant to environmental impacts. They offer a reduced mass and an attractive price. Folding structures formed by materials formed by these materials are offered on the market, they are very convenient for the moments of staying in the country;

The tree is most often used to create homemade species of benches. It is perfectly poured into the interior of any garden plot. Designers belong to this material to the classic types remaining in fashion;

Important: Wood is characterized by reduced resistance to exposure from humidity, insects in comparison with plastic, stone products or metal modifications. Because of this, the life of a wooden bench will be the smallest among other options.

Metal allows you to create benches with your own hands based on the use of profile pipelines. However, forged versions based on this material are more often applied.

An independent creation of such variations is virtually impossible, since for this you need to have blacksmith skills. Because of this, there is the possibility of using only purchased forged parts of the sidewall for self-assembly bench;

The stone is distinguished by the level of durability. Other materials cannot be compared with them by duration of use. The bench can be formed from several large boulders or purchased marble and side parts. In this case, it is necessary to repel from the price of the product and its combination with the common style of the country area.

How to create a long-term bench?

To do this, you can use a combination of various elements or fundamental material. There are several options to achieve this goal:

Concrete will help to pour durable side parts, and for the seat you can apply a slab formed on it;

The combination of materials is considered a successful option, and it is often used to create a bench in the garden. It is created using a combination of metal frame and wood planks, respectively, to create a back and seat. And also permissible combining options for benches from stone and wooden elements.

Application of copyright design for creating bench

Usually, only this direction gives rise to true works of art, they are already difficult to consider a classic place to relax. For the most part, it is used wood. You can select well-known variations of copyrights:

An annular version of the form is created as a conventional design, however, framing a living tree;
Bench created in the distance between two flower beds;
A bench decorated on the basis of a large animal grazing space;
With the addition of stone statues on both sides of the bench;
Bamboat based on a bamboo connection with a seating area in its central part.

It is worth recalling that the process of creating a garden bench will allow you to go into the creative flight of fantasy. It should not be prevented by existing designs, because you can still come up with something original.

The information received using this article helps to familiarize yourself with various options and will present several non-standard approaches.

Photo of garden benches

And the point is not even that it is very convenient and functionally, but in the fact that the garden bench has always been almost the main element of the decoration of the household site. In order for the bench perfectly into the overall appearance of the garden, and at the same time kept its functional affiliation, it will not be too much more detailed to consider this item "Garden Interior".

Materials of garden beam

Modern benches are made of both classic materials - wood, stone, wrought iron, marble, and from more modern plastic, synthetic fiber. Often benches can be made simultaneously from two or more materials - stone and iron, wood and glass, wrought steel and wood. From this depends on the style in which this subject is made. This means that it is necessary to select a bench for the garden, taking into account its stylistic features. For example, a bench from stone or wrought iron and wood will perfectly fit into the garden, made in a classic style, and the plastic bench will look great on the lawn in front of the cottage in a modern style.

But still, the most popular material used for the manufacture of a garden bench is a tree. In particular, Tick is most often used. Ticky tree has always been used in shipbuilding, as it is very moisture resistant. In the fresh air, a gray raid appears on the furniture from teak, which is easily removed with a soft brush. In addition, tick furniture must be treated with teak oil, which comes complete with furniture - so furniture will serve for many years.

Manufacturers of garden furniture are often not limited to production only benches, but make whole ensembles of furniture for the garden. In addition to the benches, it includes a table, chairs, swing, pillow storage chests - and all this, performed in one style, will become amazing decoration of any garden.

Where to put a garden bench

If only single benches are planned to put in the garden, then it is necessary to put one bench at the porch - it will be a wonderful sign of hospitality, and if you put another bench somewhere in the garden depth, under an empty tree, then this place will be an excellent corner for privacy and rest in silence.

Of course, the bench, first of all, plays a functional role. Therefore, it is worth a particular attention to its dimensions. For example, if the bench is installed in the part of the garden, where family gatherings for barbecue are held, then the bench should be long there, or several small benches, so that all family members and guests can comfortably accommodate. But if you remove the true functional purpose of the bench, then you should pay attention to the psychological aspects of its use.

According to psychologists, the joint seat on the bench can pick up the collapsing spouses, tie a friendship with a pleasant interlocutor. And the secret of this is that when people are sitting on a bench, their look covers one landscape, they breathe in one air, their thoughts and feelings are gradually starting to flow in one direction.

Garden benches - Photo

But as for the shape of the bench, now there are many of them and choose anything to be taste. Suppose the garden grows a huge spreader tree with a wide trunk. Around it can be installed a round bench so that the sitting were back to the tree trunk. But if you build a beautiful round flowerbed or a small fountain, then the round bench will fit perfectly in the same way, only sitting will already be face to the center of the composition. Round benches are very convenient to accommodate a lot of people, while not taking a lot of space.

Everyone who installed a bench in its garden, or even a few, with confidence it can say that he received another peculiar room, a cozy corner of his house, in which it is always nice to relax and spend time with loved ones. The only difference is that this corner is open-air.

Bench around the tree do it yourself

The bench with several seats can be a logical conclusion of flower beds or surround the tree in the garden. A couple of days of work - and a new place of rest is ready!

It will be necessary to work with decorative details, you can use our option or independently develop a form. The presented bench is suitable for trees with a barrel with a thickness of up to 45-50 cm!

The template for decorative slats is based on a grid of 5 x 5 cm. Intellite the cells on the tree, and then transfer the smooth line.

The shortest seat board is performed with a special notch so that the inclined backs are precisely adjacent to it. To do this, to the details, which from both ends is already spilling with a 17 °, attach two rails as a reference point for marking. The slave imposed on top should be the size of the back, the second rack serves only as a support.
Starting from the rear angle, note the thickness of the back (3.5 cm).
Since the angle of inclination of the back is 100 °, it is necessary to verify the recess with the angle of inclination of the part.
Using a joinery of a carbon, mark the angle of 100 °, as shown in the photo. Then hesitate cut the complex "wedge".
A blackboard with two slats will serve as a template for mounting seats.
So that all six seats were the same, check with the template.
For decorative slats, you will need a grid pattern, with which you can handle all six boards.
Holes Perform the forstner drill.
Round the edges of the top mill.
Mount the back.
Cover the details of the protective primer for wood and paint their enamel.