Transparent partition between rooms. Interior partitions for zoning: design features and unusual design options

Sliding partitions are widely used to design interiors of residential buildings. This is primarily due to the practicality, high functionality and aesthetic attractiveness of these elements. The main function of the sliding partition is zoning space indoors. However, the cost of such models is quite high, so much cheaper to make partitions with their own hands. How to do it later.

Sliding partitions with their own hands - features of application and types

Sliding partitions are a rather popular way to zoning the interior. With the help of such an element, it is easily possible to divide one room into several functional zones, while it will not be necessary to build a wall and spend a lot of money on its construction and finishing. It is enough to install a partition, which at any time is easily removed and the space does not lag.

There are a large number of sliding partitions both on the principle of their structure and according to the material from which they are made. Glass partitions are a pretty expensive option, which is characterized by a special attractiveness. In addition, such partitions have additional light translucent abilities. The possibility of a combination of several types of glasses and mirrors, matte and glossy surfaces allow you to create a unique composition that will decorate any room.

However, glass interior partitions have certain disadvantages. First of all, they differ heavy weight and non-resistant to mechanical damage. The glass partition can be quite easily smashed, unless of course it is not made of tempered glass. In addition, the glass partitions are easily polluted and need frequent periodic care. Therefore, such products are not recommended to install in the house where there are children. Glass partitions are more suitable for the maid-tack connoisseurs or modern style directions in the interior design.

Interior partitions made of wood are quite high. Such products are primarily environmentally friendly and some extent useful to human health. After all, a natural tree is a natural regulator of humidity in the room and supports a healthy microclimate in it.

Wooden partitions are decorated with various glass inserts, thread, etc. Wooden partitions are distinguished by high strength, universal use, light weight, which allows you to mount them in different parts of the room and dismantle if necessary. In addition, the available cost of these partitions is caused by the cheap material for their manufacture. Wooden partitions are quite simple to make it yourself.

Also, partitions for the room are performed from plastic. This material does not need additional care, it is able to imitate various textures, including a tree. Plastic partitions are distinguished by stylized variety, available cost, ease of installation. However, they are unstable before high mechanical loads. Such partitions are made independently at home is impossible.

In addition to the above-mentioned partitions, a combination of such materials such as glass, wood, metal, plastic, leather inserts, etc. First of all, the type of partition should be determined by individual features of the room in which it will be installed.

In relation to constructive features of partitions, they are:

• sliding
• tear-off, etc.

We offer to familiarize yourself with the variants of sliding models. This form of partitions has a shape of a wide web, which has filling depending on the material from which it is manufactured. The decorative bar ensures the strength of the mechanism, and on the partition canvas there are elements in the form of additional fittings. In the ratio with the number of guide planks, sliding type partitions are:

• one-stranded,
• double-lens
• three rails, etc.

Segments of partitions are moving both in one and two directions, depending on individual needs. In the ratio with the form of partitions, they are straight and semicircular. The second option is characterized by a very smooth surface, as each segment of the partition should be close to each other closely.

In a ratio with the type of canvases used in the manufacture of partitions, they are:

• all-glass;
• framework.

The first option of partitions is able to easily withstand its weight, as they do not have a frame. Especially relevant for glass partitions. The frame walls of partitions consist of a frame structure, inside which there is an additional filling with any material or a combination of several materials.

In configuration to partitions, various fittings are installed on them, they increase the level of convenience in the operation of partitions. Most often, the handles are installed directly on the canvas or built-in inside it. Some partitions are distinguished by the castle, for closing, synchronizers and closers.

Sliding partition with your own hands photo:

In the ratio with the design of partitions of sliding type they are divided into:

• rail partitions are similar in appearance with a wardrobe compartment, quite comfortable in use, well saved space;
• unbreak-out partitions - fixed only on the top guide, which allows you to open them, differ in the absence of a threshold, which makes the use of these partitions safe in everyday life and in a small house;
• the sliding partition is harmonica with their own hands - it is distinguished by an unusual appearance, the space saves well.

Among the advantages of applying sliding partitions, we note:

• the ability to save space in the room, the thickness of the partition does not exceed 10 cm, while, for the construction of the same wall, you need to spend a lot of time, material means and thickness will be more;
• qualitative designs are distinguished by high reliability and resistance;
• the possibility of decorating partitions and their own structures with their own hands allows us to make a partition in a suitable room with an interior of the style.

Sliding partition for zoning room with their own hands

The process of manufacturing interroom partitions should be started with the preparation of drawings in which the type of partition and the material from which it will be constructed is clearly defined. In addition, the opening should be measured, in which the partition will be mounted, in the presence of carcans, it is also necessary to take care of their arrangement. If necessary, partitions are built into the premises as completely overlapping the opening and overlapping only half of the opening. If you cannot equip secret pockets, we recommend to stop on the harmonica partition, which saves the place and time spent on the construction of pockets.

Making a partition that hides inside the wall, consider the fact that the depth of pockets should be equal to the width of the partition. Otherwise, hide the partition completely fails. Note that the width partition should be greater than the opening of approximately 50 mm in such a way, it will be possible to prevent the formation of cracks when the design is closed.

In order for the process of facing the sliding partition in the room with her own hands, it was quickly and successfully, first of all, be reinstated by drawings and correct materials to work. The easiest way, the installation of frame structures is performed, so it is this particular partition for a beginner.

Special attention is paid to the mass of the structure, it depends on the material from which the partition will be constructed. For these purposes, a tree, plasterboard, foam, plastic, PVC, chipboard, MDF, etc. When choosing a MDF or chipboard, we recommend ordering panels in advance, measurements defined in the drawing.

After preparation, the material and tools for work, the installation of the guide framework is mounted. When installing rail structures, it is necessary to make sure the strength and flatness of the floor. Otherwise, the partition will look asymmetrically.

Suspended type partitions, which are fixed only on the ceiling, must be installed at a reliable overlap in the form of a concrete plate or wooden beams. Note that on the suspended ceiling such structures are prohibited.

Interior partitions sliding with their own photos:

For the manufacture of partition framework, use a tree or steel profile. To close the frame, any leafy materials are used in the form of a tree, chipboard and even laminate.

Special attention should be paid to the installation of fittings, guide and sliding mechanisms. From their quality and the correctness of the installation will depend on the duration and convenience of operating partitions. You can purchase accessories in specialized stores, which sell spare parts for furniture.

For the construction of a partition with sliding doors, the hands of the rail type will require the presence of such elements of the fittings as:

• roller mechanisms;
• top and bottom locks;
• rails on which there are additional limiters;
• corners;
• individual elements whose type depends on the door to open the door.

How to make a sliding partition with your own hands

Before starting work on the partition, the opening should be measured, which implies free space for opening each sash. Choosing material for mounting partitions. Type factors as the type of overlapping, the flattering floor, the overall weight of the structural elements, parallel between the floor and the ceiling.

If there is brick or concrete walls in the house, they do not need additional strengthening. Otherwise, before fixing the partition, an additional metroprophilic frame should be installed. For its formation, use metal corners, beams, and profiles made by minimum of three millimeter steel.

Suspended structures are set to these systems. The rail system must be mounted on a previously equipped screed, the minimum thickness of which is 400 mm.

After the installation work, fittings, locks and handles installed in the recesses are made. To avoid damage to the walls, limiters are installed on the extreme parts of the partition.

Performing the manufacture of interior partitions of sliding with their own hands Follow the instructions:

1. Measure the opening in which the partition will be installed.

2. Select the materials for its manufacture, make a drawing, according to previously performed measurements.

3. Install the directing system guides. Install the mechanisms.

4. Collect the frame part of the partition, fill it with the previously selected material. Fix all the elements on the frame design.

5. Decorate the room partition, for example, on the frame design, you can install a photo collage or a beautiful image. The main thing is that the image is combined with the overall set of interior style.

If the budget for the manufacture of the interior partition is limited, then in this case, we recommend to stay on budget versions such as chipboard or MDF. Guides and fittings are purchased in advance in a special store, try to choose elements from one manufacturer, as it is possible for the option of their incompatibility among themselves. Internal mechanisms are less noticeable than external, they make the appearance of the partition attractive.

In the process of assembling the frame design, use special locks, joinery and previously developed drawings. We recommend to stop on the installation of steel rollers on the rails, they are characterized by a longer service life than rubber.

In order to improve the appearance of the design, decorate it with a variety of elements that will approach the overall style of interior design.

Sliding partitions do it yourself video:

Interior partitions do not perform bearing functions. Their main purpose is the formation of the indoor space of the apartment (dividing it into separate rooms and other rooms). In addition, partitions perform the functions of sound and thermal insulation.

Types of interior partitions

Depending on the design features, all partitions can be divided into two types:

Solid partitions;
. Framework frames.

Whole interior partitions

One-piece interior partitions can be built from gypsum concrete plates and blocks, as well as laid out of the brick (the width of such a interior partition is a half-clip) or made from wooden sawn timber. In the design of interior partitions of a frame type, a frame is present, the internal space in which is filled with by any material (aggregate).

Interior partitions frame type

The construction of the interior partitions of the frame type begins with the mounting of the frame. As materials for the framework of such a partition, a steel or aluminum profile is used, a profile of polymeric materials (in particular, from PVC), a wooden bar. To fill the framework space, sheets of drywall or polymer materials are used. Also, plywood sheets, ordinary or eurovaga, as well as other materials available on the market can also be used as aggregate.

Selection of materials for the construction of interroom partitions

Gypsum concrete and brick interior partitions have considerable strength, which makes it possible to continue to secure on such a partition hinged furniture or other heavy items. However, their construction and subsequent decoration require significant labor costs. In case the partition is planned for separating the room with high humidity (for example, a bathroom or shower room), the use of materials that do not have a sufficient degree of moisture resistance is inappropriate. So, in the specified case, drywall is undesirable. Wooden interior partitions are responsible for the highest environmental requirements. The tree is easily processed and has sufficient strength, and after his finish, the entire room acquires a very attractive view. However, its disadvantage is low fire resistance.

What partition is suitable: transparent or not

Partitions are divided into two types: non-transmitted light and transparent. Transparent partitions are mainly made of glass. As materials that do not transmit light, opaque partitions use wood, phaneer, aluminum, fiberboard, MDF and PVC.

More than all, of course, stationary partitions are popular: frame, frameless and modular. Transformable: sliding or folding are also used. There are still furniture and mobiles (for example, shirma). When making a decision on the installation of a stationary partition, especially frameless, it should be thoroughly thought out. Since, when installing, and, subsequently, and when it is dismantling, it will have to disturb the integrity of the coatings on the floor, walls and the ceiling. The framework of the partition, it provides for the production of a frame in the form of a frame where the material of the partition itself will be mounted, for example, plasterboard.

Such large-scale and serious solutions will not be taken to take - transformable space separators of the room. As already mentioned, they can be folding or sliding. Their convenience is that such a partition can be pulled or folded in the case of unrequisite.

Furniture items can also serve as a zoning of space in the room. It can be a wardrobe or rack. And it is not necessary that this furniture is height from the floor to the ceiling. Well, and, probably, the most comfortable is the mobile partition. It can be like furniture items (racks on wheels) and the others adapted to this purpose objects.

Partition for Zoning Room - Shirma

The easiest and most common type of partitions is shirma. In the construction of Shirma is used as a mobile partition.

Office at home using partition

Office partitions can be both opaque and translucent, not accustomed to the ceiling. They can be made of a frame made of aluminum or plastic. In the frame mounted filling material - glass, wooden array or aluminum sheets.

For zoning office space or the creation of individual workplaces, they set the deaf septum to the ceiling itself. They are performed with increased sound insulation.

Materials for mounting interior partitions

The main advantages of interior partitions are the speed and ease of installation, they can be performed even in one day. As an option, you can order a finished partition and hire specialists who will install it quickly and efficiently. You can install the finished product and yourself.

Brick partitions

The traditional and most common material, as always remains a popular and high-quality view of the building material. In the interior of a small room, a brick partition will create a kind of severe, inhibiting mounted wall, so they are usually mounted in large and spacious rooms.

Glass partitions for room zoning

Natural and indispensable type of material that is equipped with high-quality and aesthetic properties.

Indoor partitions from wood or drywall

This type of material is suitable for any interior, and will create a special attractiveness of the room. Partitions separating rooms are made in the form of deaf structures of wood or drywall. Such designs are very lungs, they can be installed anywhere. In addition, in such partitions, you can mount sliding doors in the form of a cabinet compartment. It is also possible to accomplish the partitions of sliding themselves.

Ceramic 3D tile for zoning

Wound Partitions for Rooms

Metal products for partitions are performed in the form of forging, whole decorative sheets, or in the form of cladding of brick partitions. But the metal canvas is more like a screen and in the interior performs the function of the decoration element.

When choosing such a way of separating the room space, the complexity represents the definition of the installation site of such a partition. If there are two windows in the living room, then you can do the setting of a small jumper between them so that the light is correctly illuminated by the fenced space. And for a room with one window, you can install a partition that could be accessed from two sides. And the light from the window would be equally equally on the felling space and the rest of the room.

The frame of such a partition can be made of a wooden bar or a special metal profile. It is important for a robust fastener to the floor, ceiling and, if necessary, to the wall. Since, plasterboard - the material is fragile, the framework must have horizontal and vertical crossbars. And if you go to work creatively, making a niche and backlight in the partition, then such a partition will create additional amenities.

Room zoning - wardrobe, rack

There is no doubt that many have a closet that does not quite fit in the place allotted in the room or even inconveniently worth it. So he can become the partition in the living room. It you just need to rearrange the right way. And the best option in this case will become a pass-through rack without the rear wall. Having established it as partition, it will be possible not to break the illumination of the room as a whole. And the installation of the partition from the modular rack, which can be, from time to time, is rebuilt into the desired form, will become an interesting and creative solution.

Partitions for zoning room - Photo

It would seem that to divide the room so as to highlight individual zones in it and at the same time save the feeling of space, it is impossible. But decorative partitions help can easily turn out and not such a focus. After all, they not only fulfill the task, but also make the interior more original, comfortable and interesting. After all, the room with an openwork or transparent partition is boring.

Where and in which room you need a partition

The partition is a solid or openwork structure that separates adjacent rooms or a part of one space. Unlike the wall of the partition - an unloaded element, that is, it does not assume the load of the ceiling. The partition can be height from 50 cm to the maximum possible for this room, it vary its width similarly, and the form is set not so much the geometry of the room as functional.

Redevelopment of the room is a complex process not only in terms of work, but also in the aspect of the official design of the documentation. Partitions allow you to take advantage of all the charms of redevelopment and not spend time on obtaining permits. The exception is made only for stationary partitions of brick or foam blocks, which create an additional load on the slabs of the floors.

Even low partition can provide visual zoning of a small room.

Odnushka

Most often partitions are found in one-room apartments with separate kitchens and studios (when space is open completely), which is caused by the natural need to hide some zones from the eye of the guests. Hide behind such a design double bed - a completely rational and implemented solution, especially for those who are inconvenient to sleep on the sofa or difficult to transform it. In this case, the bottom of the partition is made impermeable, and the top is openwork or translucent.

The end-to-end furniture partition successfully sets the layout of the layout of the room

The easiest all such zoning is performed by installing a septum-rack with closed lower sections or mounting the ceiling eaves for dense curtains. If, in addition to visual fence, noise insulation is required, various types of glass panels come to the rescue.

The septum in this case gives a feeling of comfort and isolation in the bedroom zone, provides the necessary privacy with a child with a child, allows the hostess not to blush, when guests come unexpectedly. After all, now many fuel the bed on the American manner when bed linen remains open, and this option is clearly not for outsiders. The partition also allows you to install the sofa in the next zone and thus take relatives with overnight, which is impossible when the owners themselves use the sofa.

Transparent squares simultaneously divide the living area and save the overall feeling of space.

An equally popular option zoning odnushki is the highlighting of the zone by the hallway with cabinets or partitions. It is not only convenient, but also removes the feeling of the passage room and makes the situation cozy.

Kitchen

The studios also often occur the sliding partitions next to the kitchen area, as it is often impractical for lovers to prepare an open option. But since the space for cooking is small, it would be inexpedient to separate the room of the capital wall.

It is necessary to close the glass panels - and no one will prevent the owner to create

Similarly divide the kitchen-living room of large size, as in extensive spaces it is possible to equip individual full-fledged rooms.

A glass partition with a metal frame perfectly fits into a room with classic notes.

Bathroom

Another traditional area for installing partitions is a bathroom or combined bathroom. In the first due to partitions, partitions build a shower room, which is then closed with a curtain or glass door. When the bathroom is small, the partition closes its part next to the mounting of the shower watering can and thus get an analogue of the usual curtain. Such a solution is very practical and now interior designers in 99% of cases prefer its usual finished hydrobox with a pallet.

Shower zone from glass blocks looks luxurious and unusual

I have a partition in my bathroom, half off the bath. It is made of a height of about 1 meter, it is made of foam block and covered with tiles, and the transparent glass is fixed above on pelican retainers. If desired, you can stick to the bath and hide from around the world, this corner turned out to be cozy, but thanks to the glass is not dark. During the shower procedures, protects perfectly, without it, part of the water would definitely fall into the sink, which is located immediately behind the partition. And at the expense of the difference in the thickness of the foam block from below and glass from above, it turned out a comfortable shelf, on which I hold the bottle with shampoo, a balsam and a gel for the shower. I can say for sure that this is a practical decision, including for families with children. My malas of the year in 2-3 were afraid to remain behind the usual curtain and always splashed with an open bathroom, but the transparent glass did not scare them at all. The partition is now three years old, and despite all the moved life strikes, it looks new.

Brutal metal is an excellent contrast of the light setting.

In a combined bathroom, a similar design appears next to the toilet. The partition helps to separate this space and close the unsightly object from the one who relaxes in the bathroom. By the way, psychologists confirmed that a person when performing a rite of intimate hygiene feels more protected and comfortably in a small space.

Cabinet

To solve homework homes, to engage in home accounting or just to surf in the network, you also need a cozy space, but to highlight a separate room for the office and even just equip it on the balcony / loggia is far from always. And the desktop located in the bedroom or the living room does not prevent homemade to distract worker. Anyone who tried to work in one room with children or a TV on, will confirm the need for a separate corner. The same can say the needlewoman: neither drawing nor sewing is impossible in the thick of events.

Very successful combination of wooden panels from below and matte glass from above allowed more convenient to arrange furniture

In such cases, partitions are also saved. If it is often necessary to work, the lesson is responsible, it is worth making a stationary design of drywall with noise insulation. When it is important to just hide and not distracted by flashing pictures, you can do a sliding lolan curtain or shirma on the legs.

Children's

Often, parents do not have the opportunity to allocate a separate room for each child, and children, even in different ways, have to live in the same room. When the kids share for several years or a boy and a girl live nearby, the room must be at least shirma in the room so that one of them can retire if necessary.

Unobtrusive room zoning helped separating the kid zone from a teenager's corner

Stationary partitions made of wood or drywall should be narrow, so as not to overlapping the movement of playing kids, and strong enough to withstand attempts to climb them. From the mobile safer there will be a curtain: hardin, fixed on the ceiling rollt or blinds that will definitely do not harm the kids. If the room is quite large and with two windows, the stationary partition can generally divide the nursery into two separate world with a small common template at the entrance.

Children's same-sex kids are better divided by a partition on the bedroom and gaming zone

But if your children are already more than fourteen years old, any types of partitions can be used in persuasion with them, even the brutal metal structures (for boys) and forged products (for girls).

Bedroom

In the bedroom, it is sometimes necessary to separate the dressing room or a meycapa zone. Of course, a young couple is usually not shy to each other, so she does not need a solitary zone for dressing up, but the appearance of children changes everything. One-year-old kids and two years are already very actively interested in others, so they are not superfluous from them.

Make makeup for openwork white partition much more pleasant

In addition, kids are big lovers to rent cabinets, dressers and make-up tables, so that it is possible to close one door and thus preserve all their things are extremely important for young parents. For such cases, it is possible to make a stationary septum with a height of 1-1.2 m, so that the mother remains the opportunity to observe the baby while it makes makeup, engaged in ironing or other affairs.

Even a symbolic hint for the separation of space works on creating comfort

By the way, the ability of partitions to create a musty is actively used in the arrangement of cafes and restaurants when the large hall is separated into separate secluded corners. And in huge offices, low partitions are used to create working boxes, where each employee can create its own comfortable atmosphere.

What partitions are suitable for zoning

If you planned to divide the room, you need to carefully consider the operation of the obtained function zones. The bedroom is usually separated by a stationary partition, as it is difficult to imagine that you have to ever open this part of the apartment guests. On the other hand, the separation of the kitchen and the living room / dining room is preferably mobile, so that the smells do not spread during cooking, and when covering the table, it was possible to freely move from the workspace into the zone with treats.

In addition, the partition can be:

• monolithic - all-glass or brick;

  Leave a part of the brick wall or imitate it with a clinker tiles partition - a popular way to finish

• frame-sawn drywall (cores from metal-plated drywall);

  The original form of a plasterboard septum brings the memories of tropical shower

• frame-filling in the form of a wooden screen, covered with cloth, or metal profiles with glass filling;

  Light Shirma with filling from rice paper Migom will give the Eastern Note interior

• blind, that is, consisting of elements in parallel and almost not fastened.

  Louvrugous partition harmonica looks very impressive in dark color

When classifying partitions it is extremely important to take into account the material, since the properties of the finished design depend on it. For example, the plasterboard wall will provide complete privacy, but make it mobile will not work. The blinds are lungs, they are simply installed with their own hands and is even easier to use, but noise from them noise isolation.

Glass partitions

Glass partitions are fashionable, beautiful and practical. In loft styles, minimalism, high-tech and contemporary, they look so aesthetic that they are often used exclusively for the sake of decorative effect. In addition, in the room with low lighting glass - almost the only option for zoning.

Transparent glass in the black frame will be a good partition option for real loft connoisseurs

The main mines of glass are the opportunity to break it on sharp fragments and the need to regularly wipe visible surfaces. In the first case, I can rephrase the famous phrase: the glasses are afraid - no windows. Did you often break the windows in the apartment? You can be sure that the glass partition will not be more fragile. But in the second will have to confirm - yes, it is dumping. My transparent partition in the bathroom looks clean, only if you wipe it after everyone (indeed everyone) taking the soul. For me, this transparency was extremely important in terms of design, so I went to it consciously. But if you are more important practicality, take a matte glass, an option with a pattern or droplets. But in the rest of the rooms, glass can be cleaned no more often than the facades of lockers and the door. By the way, I noticed that fingerprints and dust are assembled only in the lower third, and at the level of the eye the partition still seems clean.

If you do not like transparent glass as I love him, then one of the most important advantages of the glass partition will be the opportunity to decorate it with a variety of ways. Of those that almost every company offers:

• sandblasting or film matting. Of course, the fashionable boom on the matte drawings has already passed, but geometry and unobtrusive plant patterns remain relevant. In addition, you can always use fully matte glass;

  To emphasize the luxury, you do not always need diamonds, sometimes enough skillful glass

• lacobe or color film is an excellent option when the partition is designed not only to blow the place, but also to make an emphasis color. If the shade is bright, there is a reason to take film tinting, which can then be removed and even replaced with minimal cost;

  Black glass will never come out of fashion

• flour, film, fusing or ultraviolet stained glass window - option risky in terms of design (difficult to enter in the interior), but always very spectacular. When there is a risk that the drawing will quickly get tired, take the film - it will be possible to remake it with his own hands if desired;
• the decoration of the fates elements (when the pattern is pasted on the glass pattern of pieces of glass with a bevelled edge) and engraving is the most noble methods of decor that can be entered into any interior. Such a septum resembles a huge overflowing crystal, but it does not stand out by screaming beauty.

  Decorative elements with fucets may have a small size and intricate shape

In addition to beauty and durability, glass partitions are also highlighted by the possibility of quick installation (4-6 hours at large sizes) and not bad indicators of noise insulation. Transparent glass, if necessary, complement curtains, dense curtains or window blinds (as in offices).

The average service life of the glass partition is 50-80 years, so it is able to survive not one cosmetic repairs. And if we get bored - it can be removed and selling, on the ad sites there are such suggestions and buyers are pretty quickly.

Blind partitions made of wood

The tree is convenient because it is simultaneously frame and finishing material. In addition, it is easy to enter into any interior style, it is always safe and looks good. The cost of the structure varies depending on its complexity and applied materials. For the shelving of oak with manual carvings, you will have to lay out a round sum, but the frame-covered frame will be completely cheap and after painting it will also look stylish and noble.

Wooden lamellas will add winning strokes for any room.

Among the advantages of wooden structures is also moderate weight and the possibility of mounting already after sticking wallpaper. And this means that to add such partitions it is not necessary to start a large-scale repair. By the way, on the basis of wood, you can do both stationary and sliding models, as well as mobile screen and racks. But most often from wooden slats form blinds from vertical or horizontal lamellas. This option allows you to simultaneously use the strength of the tree and ensure the translucency of the structure.

Of the disadvantages, only sensitivity to humidity can be called, but products from larch and thermally processed ash or oak are installed even in the bathrooms. Inside the septum made of wood, it is also not necessary to lay the wiring, if necessary, it is better to make it external and hide in the corrugation or a decorative copper tube.

Gypsum County Partitions

Plasterboard partitions are already considered antitrend, but with competent use they are able to become a stylish highlight. The main advantage of such structures is the ability to disguise under the wall, they can be painted, bold with wallpaper, cover plaster, tiles, etc. The narrow partition height to the ceiling will look like a logical and appropriate architectural element and easily help highlight a niche for a cabinet, bed or work Corner. When you need to avoid the feeling of alienity, ideally to withstand the size, divide the room, without loading overlaps, and do the minimal cost, the plasterboard is the most.

Possessing a good taste, you can find it advantageously in the interior even the most irrelevant elements

But, on the other hand, add or remove the plasterboard partition only during repairs. If the brilliant idea of \u200b\u200bthe new planning came to you after sticking wallpaper, it is better to postpone its implementation or to do with a rack. In addition, the plasterboard partition can not be fine, and this is already a noticeable minus in a small bathroom, where you have to save every centimeter.

A simple plasterboard partition allowed the wardrobe more successfully.

The recipe for the correct partition of plasterboard is simple forms plus a disguise under the wall / furniture plus a functional justification. If you give the will of fantasy, it turns out that modern designers consider the bad taste and consequences of the nineties.

Video: Installation of plasterboard partition

Wound Partitions for Rooms

Metal in partitions are used in two versions - for the frame of glass products and in the form of forged elements. The first are suitable for modern styles, the second is perfectly combined with the classics, romantic, palace, baroque, glamor. But the perfect space for the adhesive partition is a modern room.

Wooden curls look gently and unobtrusive

You will receive an adhesive partition already in the finished form and correct its shape and the size of the house will be impossible. Therefore, it is very carefully taken to the design of this design. An excellent way for newbies is to make a model from cardboard and install it in the right place. So you not only appreciate how the product will look like and what it drops the shadows, but also make sure that no one hooks the curl shoulder or does not confuse in the partition with hair.

Among the undoubted merit partitions are originality and attractiveness, because each product is created using manual labor. There is always the opportunity to change the model for yourself, order a non-standard painting or invent your own drawing. Such a decor is very durable, it can be repainted several times, and when it is getting tired - generally apply on the balcony or to make a sleeper to the climbing colors at the cottage.

Of the disadvantages - quite a big weight (complicates delivery and installation) and inconvenience in cleaning due to a large amount of curved lines.

The combination of forging and stained glass can create a fabulous atmosphere in the house

Despite the fact that the forged elements seem incredibly gentle and fragile, they still remain metal. Once I was seduced by a beautiful wrought bedside table and happily used them a few weeks. But once in the morning I tried to turn off the alarm clock, and the phone fell from the table down. After a single strike on the clutch on the leg with the implacated Japanese smartphone had to say goodbye. Therefore, if you decide to establish houses forged products, let them be on top or located in places with a minimum point for impact, especially when the hyperactive levier runs around the house.

Video: Wrought partition with stained glass in the interior

Modular and furniture partitions from chipboard

The zoning of the room is furnished - one of the easiest techniques that allows you to use the space as efficiently as possible. You can make redevelopment at all without repair, and the desired cabinet or rack is collected with your own hands. Among the finished furniture, it also makes sense to try to find a suitable option, it may be a narrow bookcase, a console table or simply 2-3 chest of chest.

The transformation of a large modular partition can be entertainment.

Modular racks are very convenient to use as partitions, because they can always be modified under their needs. For example, first the bed was supposed to stand the headboard perpendicular to the window, and the partition reached the walls. Then the bed rearranged the headboard opposite the window and it turned out to be more convenient to place the partition in the center with the passages on both sides. With a plasterboard design, this will not be checked, and the modular transformed in a few minutes.

Video: Installation of a stationary modular partition

Openwork partitions from MDF

With the appearance of CNC machines, it was possible to turn MDF sheets into elegant openwork webs. Such partitions in the style of Morocco always look very exquisitely, and many firms make it possible to cut the pattern in their own drawing. Therefore, when you need to give the interior exclusive notch, designers prefer precisely partitions from MDF.

Exclusive room decoration in the form of openwork partitions from MDF will immediately transform a boring interior

They are completely safe, are able to serve dozens of years, painted in any colors and take any forms. Of the disadvantages, it is impossible to repair with their own hands and the presence of a frame that bonds the entire design (the frame is optional in openwork forged partitions).

Due to the frame of the drywall, the openwork partition looks like a picture

You can also find plastic partitions, which usually copy the design of more expensive materials. There are imitation of glass products with plexiglass, openwork under MDF, smooth monophonic canvases. Their undoubted advantages are low weight and price, but you need to remember that they are several times less and are not always safe for health.

Video: Installation of soaring partition

It may be quite enough to the ordinary inhabitant of the species described species of partitions, but designers often prefer to create something exclusive. Since some of them can be repeated personally, it is worth asking the ideas of the pro.

Photo Gallery: Designer Interior Partitions

One of the exclusive design techniques is the combination of openwork partitions and a console table Mobile closet partition will be pretty expensive, but spectacular zoning method
Metal mesh as a partition fit the most bold connoisseurs of beauty and functionality Individual landscape stained glass window will be an excellent choice if you wish to arrange a non-standard partition When in the married bedroom there is a separate bathroom, the partition between the rooms can be transparent To combine in one interior so different partitions can only designer When using end spells, it turns out a very original interior

Production and installation of the partition for zoning the room with their own hands

If you are at leisure you do not have a metal welding and do not hide in the garage with a CNC machine, the openwork partitions will not do. The manufacture of plasterboard structures requires construction skills and several days of work in a non-residential room. Therefore, we consider the manufacture of a simpler partition that can be mounted independently and without prejudice to the interior.

Wooden lattice panel is easy to make with your own hands

To make such a septum from the tree you will need:

• 4 BROUSE for vertical supports with a cross section of at least 5x5 cm. Their length should be equal to the selected partition height. If the width of the partition is greater than 2 m, the bars are better to take more of the calculation that the distance between them will be from 0.6 to 1 m;
• 3 bruck for strapping, designed to framed the future grid. The cross section is also from 5x5 cm;
• set of horizontal lamellae. Length must match the width of the partition or be a little more. The amount depends on the height of the partition, the width of the plank and the size of the gap between adjacent horizontals;
• self-tapping screws on the wood of medium length (specify based on the thickness of the bar and lamellas);
• morilka, paint or wax for wood.

Required tools:

• lobzik for cutting wood;
• screwdriver with a bat for screwing screws;
• corollary to control the correctness of the cut;
• building level;
• roulette.

Getting to work.

1. If necessary, skill wood and impregnate it with a verse or a selected protective agent.

   You can make several trials or combine several shades in one partition.

2. Cut the sawn timber to the desired size and spread the grille on the floor as you plan to mount it. If there is no shortcomings, you can bore a design of horizontal and vertical slats with self-draws or decorative cloves.

   If you wish, you can experiment with the direction of the planks

3. Secure it to the wall, floor and ceiling (if the design is planned to the ceiling height) bars in the place where the partition will be installed. Use long dowels so that the guides keep firmly. Install the prepared grille, screwing it on the screw to the guide bars. If necessary, fasten the top horizontal strapping bar on vertical bars.

   When you need to screw the self-tapping screw at an angle, it is necessary to pre-drill a hole of a smaller diameter

4. Clean the design and paint it, cover with varnish or verse. If the wood was decorated in advance, it is enough to eliminate defects that arose during the installation process. Self-tapping screws can be hidden under a spheolder or special stickers, and it is possible to leave as a brutal decor.

   The color of the wrappers need to be chosen in the morf

By changing the width of bars, the size of the gaps, the direction of the planks and color, on this principle you can create completely different partitions.

Video: Reward from Retails do it yourself

If you still doubt the practicality or attractiveness of the partition, make the most simple screen for the house. Surely, you will soon make sure that the ability to zone space is optionally, it is very convenient and entertaining.

If there is a large room in the apartment, then its space is better divided into zones with a certain appointment. Solutions of such a task will help partitions for zoning space , who put inroom. Easy and comfortable design is a better alternative to scale sprinkler. The universality of using these products was estimated by the owners of spacious dwellings and owners of one-bedroom apartments. With the help of a simple design, it is possible to significantly change the appearance of the dwelling for a short time.

The partition can be equal to the height of the room, be higher than human growth, there are no restrictions when choosing design and materials. A comfortable design will protect the corner from hot sunlight, creates cozy shelter in a huge room. Shirms and partitions were previously used for dressing, and today they are often installed in private apartments.

Features of zoning room

The partition in the large room should be installed so that in each of the parts of the room, at least one window remains. If the execution of such a condition is impossible, install a partition from matte or stained glass. This will allow the light in both zones, isolates them. Designers successfully share the room with racks. This will add functionality, room. On the shelving place books, photos, souvenirs, etc. An interesting design of the design will smooth the border between the zones.

Tip! Small rooms should not be divided, as it will make them uncomfortable, similar to technical premises. Installing the product in the studio apartment will deprive her charm, you will not succeed to achieve the desired result. Therefore, before accepting such a decision, you should carefully consider all the little things, take into account the features of the room.

Designers use such dividing elements for the organization of the useful area in the apartment with the following goals:

• You can easily split the space on the parts that perform different functions.
• Creating a private zone.
• Optical correction of space.
• Transform the room atmosphere depending on the time of day.

To give new characteristics to space, you should adhere to certain zoning rules that were created by designers:

• It is not worth separating the rectangular space along, it will lead to the creation of two long non-functional parts.
• In the low room do not put solid structures that run from the floor to the ceiling.
• Do not divide the window with a partition.
• It is not recommended to post unnecessary decor objects in a small room.
• There is a minimum of architectural details in the interior.

Varieties of partitions

To highlight the place in the room under a certain occupation, you do not need to build deaf walls. Take advantage of a light and practical design that is simply removed at the right time. Installation of the door-coupe, which will be divided by a living room and a bedroom, a kitchen and a table, etc. Create a lightweight and weightless partition, ordering cascade curtains. They will bring chic and luxury to the room, they can be easily moved to another place. Another option is shirma. Designers offer many interesting solutions using this subject.

Inpatient options are most popular, which are divided into the following types:

• framework;
• frameless;
• modular.

Stationary partitions during installation require impaired integrity of the floor covering.

TRANSFORMED STOCKS Used in the interiors:

• sliding;
• folding.

Transformable separators do not require large-scale changes, they can easily switch or remove if necessary. Such interior elements consist of one or more parts, they do not have a doorway, they do not attach to the walls. Zoning space is easy with furniture.

Materials

In the manufacture of partitions, various materials are used. Wood products are lattice and solid. They are made of timber, MDF, bamboo, etc. Magnificent qualities have structures from pear, cherries, ebony. They are durable, environmentally friendly, reliable. Plasterboard is a good interior option that allows you to transform a room with a minimum cost. It is light, does not have a large load on the floor, it is well handled. Plasterboard products are easy to install, playproof, are not afraid of fire. The disadvantages of such material include fragility.

Metal products, decorated in accordance with the stylistics of the room, fit perfectly into the interior. They are suitable for such styles: classic, baroque, modern, country. To give the design of a luxury species, artistic forging is complemented by other decorative elements. Housing owners will be able to easily divide the room on the zones, set the necessary additional objects. Beautiful decor is glass. Partitions from this material are matte, transparent, decorated mysterious patterns. They are beautiful, skip the rays of the sun, durable.

The brick partition will be severe for a small room, so this option is used mainly for spacious rooms. The product on the aluminum frame will allow to completely distinguish the space, but they will not be removed. The customer can pick up the design independently, choose the material. A successful option will be a laminate plastic partition or an option with a photocartine. The decor will give the room an unusual look, make it more comfortable.

Benefits of designs

Within dwellings, there are no erection of walls with powerful sound insulation, light designs are required for visual separation of space. The main advantage of interior partitions is the speed and ease of their installation. You can invite specialists to install the product, or independently implement it.

Benefits:

• No need to build a capital wall.
• Many materials to achieve the desired effect.
• The problem is solved in a short time.
• It is not necessary to destroy the walls and gender.
• The room saves the unity of style.
• Mobile variant allows you to change the configuration of the room in a matter of minutes.
• Combination in one room of several design solutions.

The durability of products depends on the type and quality of the material used for their manufacture. They carry a practical and decorative function. Competently selected products will become a stylish interior addition. The space will visually increase with proper zoning. Correct the disadvantages of the room by selecting functional zones.

Zoning children

If the family has two children living in the same room, then use zoning to create multiple areas with different functional intended. This technique can be used and then when one tenant is indoors. Competently dividing the room to certain zones, it is easy to achieve the goals. The recreation area involves restricting the bed with a partition. In the working area it is important to competently think about the installation of lighting, correctly place all things and items. With the help of modern means it is easy to equip a small working office for a child, which will help organize it, will provide the convenience of classes.

The room must be present in the gaming area for active kid games. It is released from unnecessary items, if there is a free area, equip the sports corner. The space highlighted for work will help the child to concentrate. Zoning will develop discipline, teach to order, create comfortable conditions for two children, defining for each personal space.

What partition is preferred?

Before ordering products, decide on its functionality. In order not to reduce the size of the room, buy a screen. Finding the right size of the product, it will be possible to close the second part of the room, but at the expense of the free space under the ceiling it will look all the way. Aluminum products are distinguished by practicality and ease, but not resistant to mechanical damage. Random strike leads to surface deformation. They are not suitable for premises where guests are often gathering, noisy children's companies. This is an acceptable option for a small-sized apartment.

Important! Pay attention to the quality of the accessories, it should be a durable, reliable and ensure trouble-free design.

Universal models are the accordions-accordion and shirma, metal, wood, glass, plastic are used in their design. Therefore, they harmoniously fit into any interior. Plastic products occupy a minimum of space and are suitable for small rooms. When choosing such a way of separation of the room, determine the installation site of the partition, consider it. This will make it possible to achieve the perfect conformity of the product stylist.

Before the practical performance of zoning, drawing is made. For these purposes today use special computer programs. Contact your designer designer, which will solve the problem in the minimum time. Creating a sketch by a professional will avoid possible errors, make it easier for the task and save time. Each owner of the apartment tries to functionally organize a space for a joint pastime, create a personal space in the dwelling. At the same time consider the tastes of family members, their desires for design and design.

Partitions for zoning space in room 43 photo:

With the help of a partition - a common designer reception. Such a solution allows even in a small room to organize currently use different options for partitions. They differ in size, shape, design.

Zoning in one-bedroom apartments is most in demand. There is an urgent need for a room at the same time to equip the living room, a bedroom and an office. Also ideas with the help of partition are relevant in studio apartments. This is mainly due to the desire of limitless space, however, with individual zones.

Partitions can be made with their own hands, as well as purchase ready-made options. Fortunately, currently there are no limits for their varieties. They are made from different materials: wood, metal, fabric, drywall, etc.

In this article, you will get acquainted with the common methods of zoning residential spaces themselves.

Types of partitions

Before you begin the separation of the room on the zone, you need to know that partitions are two types:

1. Stationary. They are directly attached to the ceiling and the floor, so it is impossible to transfer them to another place without repair work. As a rule, these are plasterboard partitions, arches, columns, podiums, and so on. The peculiarity of this kind is that some constructions are solid, and this can be displayed on the natural illumination of the zone. Therefore, designers recommend combining materials, such as plasterboard with glass or mirror inserts.
2. Have more advantages overpatient. If necessary, they can be easily moved or completely removed. And this, in turn, will allow changing the design of the room and the location of certain zones.

Designer zoning room with partition

Real photos of the rooms divided into zones can be found in the article.

In order to properly use partitions for separating the room to the zone, it is necessary to take into account not only their size and design, but also functionality, and appointment. Specialists will cope with this.

Use for zoning furniture

This method is considered to be the least costly. For zoning only narrow furniture. It can be racks, cabinets, shells, and sometimes even upholstered furniture. The most sought-after wardrobe for this role. Due to the high height, it is able to perform the functions of a solid partition, while serving the place to store things. The zoning of the room with the help of a partition is done very easily: the cabinet is installed in any convenient location. In order for this design to have a presentable view from both sides, you can discuss this issue in advance with the manufacturer (with an individual order it is not a problem). For small rooms, it is recommended to purchase models whose doors have a mirror spraying.

Book racks, in contrast to the wardrobe, form a lack of partition. Thanks to such designs, the light can freely penetrate the long part of the room. The model with a deaf table below is perfect. It will give the necessary solitude, without having lost the common space.

Multi-faceted textiles

Zoning the room with a septum partition is the easiest way. This design is perfectly suitable for both classic interiors and modern. In the latest options, it is recommended to use dense tissue with a rectangular weight loss. This will give it to form or, on the contrary, straighten. Install yourself this type of partition is not a problem. It is enough just to attach the cornice on the ceiling.

In some styles of classicism, Provence, Country can use elegant sticks with pickups, fringe, rushes, brushes. We will not be able to lambrequen.

Zoning room with a partition (watch here) has many advantages:

• mobility;
• ease of installation;
• rich abundance of color solutions;
• the ability to quickly dismantle;
• low size.

Partitions from the curtain will perfectly fit into small rooms, for example, harmoniously separating the sleeping area. They will not only hide the space from prying eyes, but also make the interior more cozy and warm.

Decorative shirma

The indisputable advantage of decorative shirm is mobility. It can be transferred to another place or add and remove it. Many mistakenly think that such a kind of zoning is only suitable for classic interiors. Currently, we make a variety of models that perfectly fit into any styles. The zoning of the room with the help of a width partition with oriental motifs will be an excellent solution for the ethnic direction. Metal structures with glass or mirrored inserts are suitable for high-tech.

Another advantage of Shirm - functionality. With independent manufacture, you can come up with different devices, such as pockets, stands, shelves. Such a solution will allow you to place many small items. It can be a remote control, comb, telephone and more.

The only task for those who choose this method of zoning is to correctly choose the designer design, thanks to which Shirma will become a beautiful complement to the overall interior.

Columns and Arches

Spacious rooms need large elements, so it is recommended to take advantage of the original method of zoning - the colon. This species refers to the stationary separation, so you need to thoroughly think about how to start them. In small rooms, this design is not recommended, since the power and greatness of their appearance can also shrink so small space.

The zoning of the room with a partition from the column has advantages and disadvantages. Let's look at them in more detail.

Benefits:

• this design is sufficiently stable;
• the ability to carry out additional lighting;
• the versatility of the material allows you to significantly diversify the finish finish.

Disadvantages:

• massive appearance columns is not suitable for all interiors;
• change the room design only with the help of repair work;
• an impressive weight design.

As for the arches, everything is much easier. They can be used both in small and large rooms. The form and design is selected individually, which radically changes the external perception of space.

Sliding doors - Stylish solution

Alternative replacement of the interior partition will be sliding doors. Using them, if necessary, you can completely hide a specific zone. As a rule, for a clear distinction, it is such a zoning of a room with a partition (real photos below).

Doors can be chosen deaf or with glass. If three and more sash are installed, it is recommended to use different models. For example, the width of the opening allows you to install four doors, then two (along the edges) are deaf, and the rest (central) - with decorative inserts. In order for the glass in the glass, it is possible to choose products with special processing: matte, figured, color or with engraved engraving.

Advantage of sliding doors:

• individual dimensions;
• wide selection of design design;
• easily open and closed.

Disadvantages:

• In the manufacture of doors, manufacturers are not recommended to make a height of more than 2.5 meters, as this can lead to the deformation of the canvas.
• It is necessary to build an additional ceiling structure.
• Low sound insulation.
• With sharp movements or strong blows, the sash can jump out of the guides.
• Roller mechanisms need systematic care: cleaning, lubricant, etc.

Fireplace - Decorative Partition

The zoning of the room using most often performs a conditional role. Using such a way, try to achieve visual separation, and not clearly placed boundaries. One of the most common delimiters is a fireplace. The time of massive models for which the chimney is needed and the additional strengthening of the foundation has passed. To replace them, they came compact fireplaces, performing the role of decor, and not central heating.

In order to divide the room on the zone with the help of the fireplace, it is necessary to choose the right model. For this purpose, false panels or electrical appliances are suitable. They are plausible to imitate live fire, so externally practically do not differ from full fireplaces. The only drawback is the absence of the smell and the sound of crackling of firewood.

Built-in models are suitable for zoning. They are mounted in a predetermined construction, as a rule, from drywall. And then decorated with appropriate materials.

Universality of plasterboard

Currently, brick interior partitions have almost ceased to be used in residential premises. Their functions were perfectly replaced by plasterboard. At the same time, it has a huge number of advantages in comparison with other construction materials.

1. The zoning of the room with a partition from the plasterboard is significantly saved by space, its thickness is about 7 cm.
2. Due to the flexibility of the material, different forms can be attached to the structures.
3. Accurate compliance with the technologies during installation guarantees a long service life.
4. The surface of the drywall can be painted, damage with wallpaper, ferry, tiles, plaster and other materials.
5. Hollow construction perfectly hides communications, wiring and other inconvenience.

However, speaking of such partitions, it is impossible to be silent about the disadvantages. They are quite a bit:

1. For the construction of a plasterboard design, it is necessary to own special knowledge and have skills in the work.
2. The installation of such a partition is a complete repair, in which you need to be prepared for dust and construction dirt.
3. The drywall surface must be placed in front of the finish finish.

Modern glass partitions

Sometimes the room is so small that separating a certain zone, you can visually overload the space. How then be in such cases? Designers found a way out of the current situation and offer an alternative zoning of the room with a partition. Glass, in this case, will be the only right solution. It misses the light perfectly, and the room will seem much more spacious. The design of such a partition can be different: a sliding, stationary, rotating. As a rule, only tempered glass is used during the manufacture. It has good technical characteristics, and this minimizes the risk of random damage.

Wood partitions

The zoning of the room with a septum from the rail is the most common option in country houses, especially if the interior dominates the tree. For apartments, this method is also relevant. In order to build such a partition, you will need to install the guides on the ceiling and the floor. After that, the surface is assembled by a setway. The advantage of such a partition is in an inexpensive price and naturalness of the finishing material.

Tree in the interior is a classic. Such decoration can be used in all stylistic directions. To care for the surface of the partition is very simple, it is enough to wipe it with a damp cloth. If over time the appearance will lose attractiveness, then it is possible to update it with paints and varnishes.

Living partition

In the modern world, such quality as naturalness became very valued. Therefore, many prefer the zoning of the room with the help of a partition from the living colors. Immediately it is worth noting that its appearance is incomparable with any other options. However, such a partition is very arrogant. Lack of light and improper care can completely spoil it. Living flowers require increased attention and take a lot of time, but the originality of the interior fills the spent forces with interest.