Doors for bathroom and toilet - Beautiful options for a better design (90 photos). Secrets of a good purchase: choosing doors for the bathroom and toilet Which is the best to install a door to the bathroom

Doors for bathroom and toilet differ from those that are installed for other rooms. They need to be practical and at the same time fit in and around the house. Before buying doors, check out tips on how to choose the right one.

Criteria for choosing a door for bathroom and toilet

Regardless of whether it is separate or separate, you need to carefully approach the decision of the issue of buying a door for a bathroom and toilet. How to choose not to have to change after a few years? First, you should take into account the specifics of the rooms. Doors for them must be resistant to moisture, moisture and steam. Because of this feature, the fittings (hinges, handles, latches) must be more durable than in other interior designs.

It is more difficult to choose doors for a bathroom than for other rooms. After all, such doors must be durable, soundproof and resistant to moisture.

If there is a hood in the room, and it works properly, there should be no problems with humidity. However, take into account how often and for how long you plan to use the bathroom. This largely depends on the number of family members. Also, when choosing a door structure, consider the size of the rooms and how the plumbing is located in them. It is important that the doors are good at isolating sounds and keeping you warm.

What material to give preference to

Most manufacturers of interior doors use:

wood (including MDF, chipboard and veneer);
glass;
plastic.

Sliding doors from natural wood

Wood

The peculiarity of wood doors is that they can "breathe": absorb and release moisture. In the bathroom, this process can be especially noticeable - the doors swell. To prevent this from happening, you need to regularly paint them or open them with varnish. Antiseptic treatment will not be superfluous. Wood collapses when splashed with water. Therefore, such doors are not suitable for small rooms.

Advice. So that the door frame does not lurch over time, it should be securely fixed initially. For this, use anchor bolts and polyurethane foam.

The advantages of wooden doors include:

they look noble and create coziness in the apartment;
are made of high quality material (usually oak or beech);
with proper care, using an antiseptic and varnish, they can serve for a long time.

Doors made of natural wood, although expensive, are very beautiful and durable

Cons of wood products:

are very expensive;
due to high humidity often become covered with cracks, which forces the owners to periodically restore them;
caring for them is very expensive.

Chipboard, MDF, veneer and laminate.

The first two materials are pressed wood boards, and veneer is a thin sheet of wood cut in a special way. They are very common in the manufacture of doors. But nevertheless, experts warn about the fragility of such structures, if it comes about installing them in a toilet or bathroom. According to the owners, doors made of these materials swell rather quickly and stop closing normally, in addition, they are unstable to strong impacts.

Laminated doors

The advantages of wood-based panels include their low cost. They fit well into the interior of the entire room. However, the instability to high humidity is the main disadvantage of the installation in the bathroom. The same applies to natural veneer doors. They look like real wood, but they serve much less.

TO budget options"Wood-like" also includes laminated doors. These are the same MDF structures, but covered with a laminate - a special film. It protects the door from moisture, is easy to clean, is inexpensive, and has a wide variety of patterns.

Laminated doors fail pretty quickly

However, there are many disadvantages to such a door:

low level of sound insulation;
impossibility of restoration (in case of serious damage, it will need to be replaced);
external unpresentability (they look very simple).

Attention: Doors made of MDF, chipboard and veneer contain formaldehyde, which can cause individual allergic reactions.

Glass

For doors to the bathroom and toilet, manufacturers use a particularly durable material that is difficult to break.

Glass doors, despite the external fragility, are quite durable

Other advantages of these designs are as follows:

resistance to moisture;
good sound insulation;
environmental friendliness;
ability to keep warm;
variety of models;
external attractiveness;
thanks to the glass, the room is visually enlarged.

Glass doors are very beautiful but require careful maintenance.

disadvantages glass doors for a bathroom:

settling of condensation, which leaves streaks on the glass;
frequent care (it is necessary to regularly wipe the glass to give it a neat look);
high price.

Advice. Despite the strength of glass for a bathroom, in a house with small children it is better to additionally cover it with an impact-resistant film.

Various types of plastic

This material is well suited for wet rooms. A plastic door is cheaper than a glass one, but it also has many advantages:

not afraid of exposure to water and steam;
lasts long enough;
retains heat well and isolates noise;
has many finishes;
hygienic;
easy to clean.

Plastic doors

The disadvantages include the rapid deformation of such doors in the event of a heavy load on them. With this in mind, manufacturers produce more durable designs. They are equipped with special inserts that reinforce the product (increase strength), or are made on an aluminum base. There are such metal-plastic doors more expensive than usual.

The main types of door designs

Design of doors for toilet and bathroom

By choosing door structure for a bathroom, you need to pay attention to how harmoniously it will fit into the interior. For example, laminate doors are almost identical in design. This can be useful if you plan to install them in all rooms. Manufacturers often decorate such structures like stone or wood.

Plastic products are distinguished by a wide variety of palette. This allows you to choose desired color doors, combining it with the rest of the apartment or house. However, perhaps most of all designers pay attention to glass. Doors from it are made opaque, decorating them:

Various designs of bathroom and toilet doors

stained glass paints or multi-colored glass;
gold and silver paints, creating a dusting;
sandblasting materials, etc.

In addition, glass doors are matte, mirrored, embossed. Often they are complemented by inserts made of wood, metal or plastic.

Often, toilet and bathroom doors are smaller than other designs. This is due to the fact that a low sill is usually placed at the entrance to the bathroom. It will be useful to make careful measurements before buying.
A ventilation grill can be installed in a wooden or plastic bathroom door. This solution is suitable for rooms without natural ventilation.
When installing sliding doors, additionally use insulating gaskets.

Fastening system sliding doors

How to choose doors to the bathroom and toilet: video

Doors for bathroom and toilet: photo

What door to put in the bathroom so that it does not deteriorate from high humidity, is durable, reliable and beautiful? Not every material will be able to withstand specific conditions of service without consequences, so it would be impractical to choose a door, guided only by its suitability for the interior. Let's figure out which doors are best to put in the bathroom by type of design, material and external design.

Wood MDF Plastic
Glass Mirror Stained Glass

To withstand the conditions of use in the bathroom, the door to the bathroom must be resistant to high temperature conditions and humidity, ensure good air exchange and sound insulation, and have antiseptic properties. What materials will meet these high requirements?

Natural wood

Solid wood bathroom door - good choice if it meets the following requirements:

has an external water-repellent paint or varnish coating;
treated with antiseptics;
made of hard woods that absorb little moisture (beech, oak, mahogany).

It is important to install the door unit correctly. So that the box does not bend over time from the constant exposure to hot steam and water, it is fixed using an anchor and polyurethane foam. If these conditions were met during the selection and installation, in the future its durability will depend on proper care... From constant humidity and fumes, external protective covering loses its properties, and it must be updated from time to time, otherwise cracks may appear on the canvas.

Covering from MDF or fiberboard

Manufacturers of MDF and chipboard doors assure that the products are absolutely not afraid of moisture. In fact, the structure consists of a frame made of pine, which is highly hygroscopic. The structure has water-repellent properties due to the outer finish of the canvas: the laminated coating is resistant to moisture, but until chips and scratches appear on the surface. There are other vulnerabilities as well: backside boxes for which water-repellent protection is not provided. In just a few days of operation, the wood can swell and the door will stop closing completely.

Products from MDF and chipboard have an affordable cost, wide the lineup and a varied range of colors are their main advantages. To ensure they have a long service life, it is necessary to process all open areas boxes protective compound, make sure that the edge of the door is glued properly and has no cracks, protect the door surface from damage.

Metal-plastic

If you are going to purchase doors to the bathroom and toilet, and doubt which ones will last better and longer, take a closer look at metal-plastic structures. Aluminum and plastic, the main components of these doors, have many advantages:

resistance to moisture, temperature extremes and cleaning agents;
strength and durability;
non-susceptibility to deformations;
simple hygienic care;
lack of a nutrient medium for putrefactive bacteria and fungi;
low cost.

It will also be easy to choose a bathroom door with a design similar to other structures installed in the apartment: the external decor of metal-plastic PVC film allows you to get any color and texture.

Glass

Glass door - very good an option for the bathroom, given the resistance of this material to moisture. There will be many disadvantages of this design:

When turned on hot water the glass surface is constantly covered with condensation. Moisture flows down the smooth panel, accumulates in puddles on the floor and leaves streaks.
Water stains, splashes, fingerprints are very clearly visible on the glass surface, therefore, such doors need constant hygienic care.
Glass is fragile and, if broken, is also dangerous. So that in case of damage to the glass door, it does not crumble into small fragments, the surface is protected with a special film, and this affects the increased cost of products.
Low absorption of sounds is another drawback.

Glass door designs are very diverse. It is customary to install deaf structures in the bathroom, therefore, designers solve the issue of glass transparency in various ways: they create stained-glass drawings, do spraying with paints, paste over with foil or matte.

Types of doors by opening method

Swing Sliding Foldable

Which door is better to put in the bathroom according to the opening method? Manufacturers provide several designs to choose from.

A swing door is the usual standard option, quite convenient if only allowed square meters... The structure consists of a box and a sash attached to it with hinges. Provided that the bathroom is usually modest in size, the door leaf opens outward. This saves the area of the bathroom. It is necessary to install such a door taking into account that, when open, it does not block free access to other rooms.
A sliding door does not require additional space in the room, but for it it is necessary to leave a part of the wall free, where the sash will move. There is another option: to equip a groove inside the wall, where the sash will go when opening. In this case, the door will not interfere with the use of free space.
The folding design "book" or "accordion" has the only drawback - poor sound insulation. This design is compact, in open form takes up a minimum of space.

Color selection

What color to choose bathroom and toilet doors? The entrance to the bathroom, kitchen and room is, as a rule, in the hallway. To avoid color dissonance, the most rational decision- choose the same shade for all designs. If the door block placed in the bathroom is made of a different material, you must take care in advance that the decor of the doors is in harmony with the interior in color. It can be a colored textured PVC film, a similar pattern on glass and similar fittings.

Hardware features

When choosing a door to the bathroom, you need to take care of suitable fittings. These are hinges and a snap-on handle. It is advisable that the design of the chosen option corresponds to the fittings installed on other doors of the apartment. To check the quality of products, you should pay attention to the following points:

Door hinges should not squeak. High-quality fittings open smoothly, but with little effort.
A lock with a magnetic latch has a shorter service life than a mechanical one. Pay attention to the tongue of the lock. The plastic tongue produces less closing noise than the metal tongue.
You can determine the quality of a doorknob by its weight. The iron core, which is characterized by a long service life, is significantly heavier than the unreliable silumin, a material for cheap Chinese products. The spring of the handle must be elastic.
For the door to be locked from the inside, the handle must have a locking device. It is considered more reliable in operation when the latch is included in the handle kit, but during installation it is located separately.

All door hardware must be covered by a warranty. If the store refuses to issue a warranty card, it is better to refrain from buying.

Rating of manufacturing firms

Before choosing the doors to the bathroom and toilet, we suggest that you familiarize yourself with the rating of manufacturers.

"Alexandria Doors"- Ulyanovsk factory. Modern equipment from Germany and Italy allows us to produce products of European quality.
"Volkhovets"... Doors of this brand are produced in Veliky Novgorod. Customers are provided with a very wide range of products in a variety of styles.
"Dera"... The Penza company has been producing its products for more than twenty years. The manufacturer offers a unique design, high quality and affordable prices.
"Stendor"- practical, elegant, durable doors from St. Petersburg. The factory is equipped with imported equipment.
"Sophia"... The Tver factory recently upgraded its equipment. The products are made in accordance with international standards.

World famous foreign brands:

Tre-Piu Is an Italian company. Offers non-trivial models with finishing elements made of aluminum, impact-resistant glass, veneer, fine wood.
Garofoli- a huge range of models from the Italian manufacturer.
Dana Is an Austrian company. It has been supplying its products to the world market for over 40 years.

Products renowned manufacturers characterized by decent quality. The durability of the product depends not only on how to choose a door, from what material, and from which manufacturer, but also on correct execution installation work, timely hygienic care and careful handling.

Replacing doors in a house is a serious undertaking that requires a balanced approach. Special attention should be given to damp rooms. Not all materials can be used there. Choosing doors for the bathroom and toilet is far from easy, since there are many nuances to be taken into account.

Requirements

Doors to the bathroom and toilet are chosen not only for their appearance. It is also necessary to take into account their properties. In bathrooms, high humidity is not uncommon, so moisture resistance is an important characteristic. Good tolerance to wet cleaning is equally important. This is another selection criterion. Durability and reliability are also important. Properties such as sound insulation and low thermal conductivity are also important. In the bathroom, we feel comfortable with more high temperature, and it is easier to create it with a door that has good thermal insulation properties.

There are also technical nuances. According to building standards the doors to the bathroom and toilet can be made narrower than to the living quarters. This is precisely the situation in apartment buildings... In private houses and cottages, this rule is rarely followed, and during repairs, or often they also make doorways of ordinary sizes.

There is also a nuance. For quick removal humid air requires good ventilation. It can be natural or forced (with a fan), but for it to work well in the bathroom, there must be an influx of fresh air. To open up air door leaf make 1.5-2 cm shorter, leaving a gap in the floor area. It just sounds scary, but in practice this gap is almost invisible. The second way to ensure air flow is special ventilation grates, which are built into the door leaf. And the third one is the air inlets in the wall. Of all the options, it is the idea of \ u200b \ u200bthe gap near the floor that is least striking. It is also the easiest to implement at the same time.

What doors for the bathroom and toilet are

Even the most ordinary doors- wooden or paneled (wood frame with plywood inserts), painted with paint. With well-functioning ventilation, they serve well, only few people like them. Therefore, they prefer to replace them with new, more modern ones.

Wooden and veneered

Solid wood doors are undoubtedly beautiful, but also expensive. They are placed in a damp room if they are covered with a layer of varnish. In this case, manufacturers in the description usually indicate that they are "waterproof". Provided you use a good varnish and apply it correctly, the coating protects against moisture and washes well. If necessary, the varnish layer can be renewed, although this operation will not be required soon.

Veneered doors are made from inexpensive low-grade wood, and then veneered with expensive wood veneers. Veneer is a thin saw cut of a tree - a few millimeters thick. The presence of glue makes veneered doors not quite "natural", but at the same time protects the wood from swelling. However, veneered bathroom and toilet doors are not the best the best choice, because the veneer is not airtight, moisture penetrates into the smallest cracks, due to which the surface warps and the veneer begins to flake off.

Wooden doors - expensive and beautiful

Not so long ago there were doors trimmed with euro-strip. It is a new material composed of wood and binder. Wood fibers dyed in different colors are mixed with a synthetic binder. This mixture is forced through a powerful press and comes out in the form of a belt. In appearance, the resulting material is practically indistinguishable from natural veneer, and surpasses it in terms of performance. Doors finished with euro-strip are not afraid of high humidity, the coating has a high mechanical strength and does not fade in the sun. You can distinguish them by touch - the coating is too smooth.

If we talk about other characteristics, it can be noted that wooden and veneered doors for bathrooms and toilets have low thermal conductivity and protect well from noise. Wet cleaning they endure, but soft cloth and without aggressive detergents.

Plastic and metal-plastic

Plastic doors to the bathroom - an economy option. They are inexpensive, they are not at all afraid of water in any of its conditions, they do not deform from high humidity. Their disadvantages are that they are made from unnatural raw materials, inexpensive models have low mechanical strength. It is also worth remembering that, like doors made of wood or veneer, they cannot be "adjusted" to the desired size.

Plastic - good material for wet rooms

Reinforced plastic doors are rarely installed in the apartment bathroom. But not because they do not fit in quality. Rather, they are not used for aesthetic reasons - their appearance is very different. If doors made of other materials are installed in other rooms, it is very difficult to choose a more or less suitable color. Another limiting factor is the hefty price tag. And the characteristics - better than you can imagine.

Glass

Glass is not very popular as a door, but it has good characteristics. It does not react to water and high humidity, does not rot and you can wash it as much as you like. They have one drawback - fragility, but modern technologies overcame it - glass is made tempered, which gives it increased strength. There is also laminated glass (duplex and triplex). This is when glass sheets are glued with a reinforcing film.

It is possible to break a glass door leaf, but it is difficult to do it, and if it happens, the glass breaks up into many small fragments with smooth rather than sharp edges. In the case of laminated glass, the fragments hang on the film, and the tempered glass simply disintegrates into small fragments, but one should try to get hurt by such fragments. The only trouble from such an event is the need to buy a new door.

Glass door leaf can be colored

Glass doors for bathroom and toilet are made opaque. They are tinted, can be mirror-coated or stained-glass. All that can be seen through such doors is a blurred silhouette and no specifics. In general, a good option if there are no small children in the family.

Laminated and PVC

One more inexpensive option bathroom doors - laminated with foil. The door leaf itself is made according to frame technology... The frame is made of pine timber, the gaps are filled with soundproofing material (the cheapest are corrugated cardboard, more expensive - polyurethane foam), after - sheathed with laminated fiberboard or MDF. The surface of the door can be decorated with a wood look, it can be smooth (it is much less common).

The door leaf is lightweight, but it does not tolerate shock loads very well. At good quality lamination, such a door to the bathroom and toilet is not afraid of moisture, and it can be washed well (with a damp soft cloth with non-aggressive liquid detergents). As long as the lamination remains intact, it looks quite decent. With intensive use, the film is erased and appearance deteriorates markedly.

PVC bathroom doors are made using the same technology. The only difference is that the frame is sheathed with extruded PVC. The density and strength of PVC is several times higher, so the durability is also higher. Better and performance: vinyl is not afraid of water in any form, so for the bathroom and toilet this is a great option.

Combined

When they say combined doors, they most often mean that they have inserts of a different material. And most often these are glass inserts. Glass sizes can vary greatly. It can be a narrow strip along one of the edges, or big piece half the door. Glass is also used opaque, tempered or laminated. If the glass in the model you like is too transparent, you can stick a self-adhesive stained glass or translucent film on it.

Combined options are the most interesting in terms of design

Glass inserts are made in wooden, metal-plastic and veneered doors. Less often - in MDF and almost never - in plastic. But the most interesting in design models are found in this category - there is more room for imagination.

Opening systems

except different materials doors for bathroom and toilet can have different types opening. The option we are used to is swing doors... All of them are good, except that in the open state they block a solid gap of space.

Are becoming more and more popular in recent times... This is when a bar is attached to the upper part of the door, rollers are attached to the door leaf, the doors roll along this bar. According to the method of mounting the guide, sliding doors are open and secret. Open - when the bar is attached to the wall from one side, and the canvas runs along the wall. With a hidden system, a niche is made in the wall, into which the door leaf enters.

The second option, when open, takes up almost no space, but during installation it requires serious intervention in the structure of the wall, which is not always possible. It is unlikely that it will be possible to carve a niche in a concrete or even a brick partition. the right size... Then, in order to hide the canvas, they build a false wall of drywall.

Lack of sliding doors - more complicated installation and at open systems — low degree soundproofing (the canvas simply hangs along the doorway, solid gaps remain). In this regard, secret systems are getting better - they have door frame, with a groove into which the door leaf enters and a seal in this groove. Such systems have good sound insulation, but are expensive.

Folding - accordion (right) and book (left)

Another view. There are two types - "book" and "accordion". Book doors have a door leaf consisting of several parts. These parts are movably connected, when opened, they fold, resembling a book. Accordion doors have a similar structure, but fold in a different way: relative to the axis passing through the center. Book doors are often glass, they can be made of MDF or plastic, accordion doors are often made of plastic and they cost a little.

High humidity and temperature, splashes of water and soapy foam - not only the floor and walls in the bathroom are exposed to all these aggressive influences. The bathroom door is also under threat - meanwhile, special models are rarely found in the catalogs of manufacturers with photos. In such cases, it remains to buy ordinary serial products - this will also help to create. Indeed, according to modern design canons, the doors should be the same or consistent in the same style.

Which door is the best for the bathroom

When developing a technology, most manufacturers take into account that their products will be used in wet rooms as well. However, this does not mean that any of the models on the market are suitable for a wet area. We will tell you what to look for when choosing.

Which material is best for bathroom and toilet doors

First, let's consider what materials are generally used.

Lamination

It is produced as a base and a layer of paper glued to it - this is called the lamination process. But they are glued not on ordinary glue, but with the help of special resins. But all the same, there are gaps into which moisture can penetrate. Perhaps one of the few options devoid of this disadvantage is laminate. It differs in greater thickness and is varnished on top for better protection... The canvases processed in this way can withstand humidity up to 60%.

PVC covering

These models have a MDF base, and a PVC coating on top. It is water-repellent and can even be washed. The advantages include a wide variety of colors and textures of these interior doors - it will be easy to choose the one you like in the bathroom and toilet. But there are also disadvantages - the canvas can exfoliate from too high humidity. And when the temperature rises in the paving, PVC can emit chloride - for those who strive for, it is better to refuse this type.

Eco-veneer

Modern material, which is produced from woodworking waste and polymer plastic. Despite the complex name of the latter, it is environmentally friendly. It is difficult to distinguish eco-veneer from natural material externally, but in quality it even surpasses real veneer. Among the advantages are moisture resistance, aesthetics and environmental friendliness. But it can become an argument not in his favor.

Wood (veneer)

Too capricious, and is unlikely to perform well in the bathroom. But if you choose a product with a high-quality varnish coating, it is quite possible to put it. The frame of veneer products is made of soft wood or chipboard, but outside is already covered with natural wood species.

Plastic

Perhaps, if you are looking for an answer to the question of which door to put in the bathroom and save your budget, this is exactly your option. Raw materials are inexpensive, therefore ready product available. Plastic is not afraid of temperature extremes or moisture as well. And the sound insulation of such models, as a rule, is at a height.

But do not rush to draw an unambiguous conclusion - especially if aesthetics are important to you. Plastic products are rarely beautiful, but they are also made standard form, and any deviations are impossible. It is also not an environmentally friendly material.

Glass

Glass constructions absolutely waterproof, but the thickness of the canvas must be at least 8 mm, otherwise it will not be possible to provide sound insulation. In addition, it must be taken into account that products decorated by sandblasting (matte and with a matte pattern) become transparent when moistened, and any embossed pattern ( laser engraving, fusing) will make it much more difficult to care for the surface.

It is better to give preference to hardened structures with colored ceramic coating or triplex - plain color, with a pattern or photo printing. Glass products will last longer in the bathroom than any other, while it is easy to choose an option that matches the style of apartment decoration.

So which material is better? Pay attention to alternatives to wood: eco-veneer, plastic and glass. And only if the room is spacious enough and well ventilated, you can think of laminated, made of natural wood (veneer) and PVC-coated. When choosing the latter, it is the type of coating on the web and edge that is of great importance. If the joints are not tight, moisture will penetrate in this place and the product will deteriorate.

Which door to choose in the bathroom by design

There is traditional options- swing and other structures. Let's consider each one.

Swing

A classic that is used in all rooms. Has a standard frame: box, platbands are placed. You can also put thresholds, and this improves sound insulation. The standard swing type opens inward or outward and there must be room for that. If inside, there may be problems with this.

Sliding

The design of the compartment is very space-saving, which is again useful in small sizes. But when installed, a gap remains between the floor and the canvas, which means that heat and sound insulation will be reduced.

You can compromise and install a model that slides into the wall - this is only possible before starting capital works, since you need to groove the wall. In such sliding options, the disadvantages are minimized.

Foldable

Structurally, they are divided into a book and an accordion. In the first case, the canvas is divided into two parts, and in the second - into three or more. When folded, they will take up space in the opening, so the space savings are essentially negligible.

6 points to consider before buying

1. Availability of decor

Paneled structures are made of solid wood, according to the generally accepted opinion, they are unsuitable for a bathroom. However, this is not always true. If the frame of the structure is made of glued bars, and the panels are made of high-density fibreboard (HDF), and at the same time the canvas has a multilayer coating (high-quality polymer enamel or varnish), then water is nothing to him. The likelihood of warping and cracking is minimal, and the finish will withstand both high humidity and frequent washing.

And shield (smooth) canvases, as practice shows, are quite capable of withstanding the conditions of the "home tropics". Such models are characterized by stable geometry, because their frame (usually made of ordinary coniferous blocks) is protected from moisture by skin. But the service life of the latter depends on the type of decorative coating.

2. Transparency

The presence of frosted or tinted glass often raises questions. From an aesthetic point of view, it looks nice and good, but how practical and is it suitable for a bathroom? The fact is that sound insulation is good only if the glass is dense, from several layers.

3. Choice of size

Typically, the bathroom and toilet should be about 194-196 cm in height and 60 cm in width. Meanwhile, the minimum height standard door block for many firms it is 204 cm. A structure of the required dimensions can be made to order (it will cost 10–20% more, and it will hardly be delivered earlier than in 2 weeks). Another option is to file the canvas, having previously checked with the manufacturer how to do it correctly. Typically, for panel boards, you can cut 100 mm both from the bottom and from the top, but then a strapping bar should be glued in place.

There is always an extractor hood in the bathroom. Moreover, in many apartments, it is designed to serve the adjacent premises. And it will function normally only if you leave a gap of at least 8 mm between the floor and the canvas. But such a gap will adversely affect sound insulation, so it is better to build it into the door vent valve with sound absorber ( approximate price- from 1 200 rubles).

Prepared by: Vladimir Grigoriev