Window with ventilating valve. Ventilation valves for plastic windows

Recently, plastic windows in various areas of building buildings and structures are increasingly found. Thanks to most advantages, these designs can be used both in housing and industrial. They are well protected from heat and cold, prevent the penetration of noise and different smells, as well as harmful insects. But there is a huge drawback, which lies in the obstacle to the penetration of air into the premises.

It can be noted that this is not quite a lack of plastic. It can be noted that it is these structures that are not provided for houses that were built in past centuries.

Ventilation and plastic: compatible or not?

Why did the method have not yet come up in the modern world for efficient ventilation of windows? Here you need to penetrate the question more. Everything was based on the presence of drawing in the kitchen and bathroom, as well as ventilation through the door and window gaps. This technique was invented a long time ago and already justified the expectations of inventors.

And now you can see this invention by the arrangement of new plastic windows. When the design passes the installation process, then all the slots and gaps are close, thereby produces moisture in the room. It violates the natural air exchange due to not air intake. In the room of the house or it becomes stuffy, wet and discomfort begins. There may begin such a process that will be as follows: all the air will not get out of the room, but will remain constantly there, as well as all the smells from neighboring apartments will be completely completely from you.

There can be allocated other problems that occur during operation. Due to the constant closing of windows, condensate can be formed inside the design, which will prevent the normal use of materials. It is best to keep windows on micro-ventilation functions for obstacle glass fog.

Watering Mode Plastic Window

Of course, you can get rid of such problems with the help of simple ventilation on several built-in modes. Also, when acquisition, the number of cameras should be taken into account. If there is a cold temperature mode, it is better to buy multi-chamber windows that will save heat much better. Of course, the quality will have to overpay, but the result will not make you wait.

Combining ventilation and windows

Is it possible to combine ventilation and windows? The answer is simple - you can. There are quite a few options for the device. Combinations are quite a lot, some of which are:

with the window;
with self-detention;
with a comb;
with ventilation valve;

Drill the hole for installing the ventilation valve

Room vent valve

And from the street

Window windows

A fairly common method of ventilation device, which is used for quite a long time. It provides for air intake under the ceiling in a room, which is then mixed with room, thereby forming a cool and clean product. Here the appearance of drafts or condensate in the window is excluded.

The disadvantages of such a design are quite large appreciation and complication of the structure, which increases the weight of materials. It is worth noting that in case of complication, a large amount of light flux is lost, which makes the room quite dark. It is not always good.

Plastic windows self-detention

Self-delayed windows are the optimal option for the device in all buildings. They can find application, both in civil and industrial construction. This option lies in the fact that the structures use profiles with holes at the top and bottom of the frame. The holes are located in the upper inner and lower outer parts. Air masses, passing through the bottom, heated, and already heated air enters the room.

The principle works very well, but has some limitations. Such designs cannot be installed on the upper floors due to the insufficient amount of incoming air. From such a shortage of many systems recently, the ventilation valve for windows has purchased a large distribution.

Window with combs

These windows received the greatest distribution. With such a device in the windows, a regulator is built, which allows either to open the window completely, or open it in several modes.

Such a mechanism is very inexpensive, but quite well gives the result. The comb makes it possible to adjust all incoming masses and leave the window in the intermediate mode.

Ventilation valve in windows

For normal operation, such a device must combine several functions for full-fledged work. In compliance with such laws, the entire room will be in constant ventilation, which will ensure normal temperature regime. It should be noted that such a valve has several varieties that are called classes. Classes are very different from each other and have different ways of mounting.

To put the valve in the window frame, you can either replace the entire double-glazed glass, or replace the part that is responsible for venting. There are also its drawbacks, which are to increase the cost and weight of the structure. Such operations are carried out in less than an hour, but guarantee a fairly good result.

Next, you need to decide on the control mode. Here, as in any design, it can be used both automatic and manual modes. In such options there are differences that are as follows. With the help of manual, you can adjust the ventilation, thereby placing it where it is necessary. There is a partial ventilation that allows you to do these processes only where it is required. As for automatic control, then everything is very simple. The mechanism embedded in the windows itself adjusts the required temperature and if you need to add the air masses of the desired temperature. However, there is a third option that combined all the advantages and removed many of the shortcomings of the two previous modes. This is a mixed mode. It allows you to configure any mode when it is convenient.

Operation in winter

There may appear their problems that are concluded in the appearance of condensate. But such a lack is impossible to predict. In all cases, everything will be different. Such a consequence will depend on the temperature of the external air, the material of the walls, the chamber of the windows themselves.

Climate valve

When operating in winter, it is worth noting that under any circumstances, the premises should be at least 2 times a week. This will provide a rather durable use of structures and save them from condensate.

Installation

Considering this issue you need to remember that it is better to hire good specialists who will qualitatively establish this design.

If there is an incorrect installation, there are all sorts of difficulties, which sometimes lead to attenuation with a large amount of moisture. This can lead to fairly difficult results and money will be thrown into the wind.

Installing the window ventilator

Very important . How to arrange it correctly - read in a separate article.

Plastic windows appeared with us quite recently - the first workshops for their production in the CIS countries appeared in the early 90s of the last century. Nevertheless, we are already hard to present your life without plastic glass windows. The main thing is their dignity - they do not let street noise and cold air in the apartment. That's just at the same time we lose the most important - natural air exchange. You can correct this disadvantage using the supply valves on the windows.

PVC windows are good: with them heat, quiet and cozy. However, with plastic windows leaves much to be desired. Without proper ventilation, the tenants risk earning "side effects" like incessant fatigue and. Of course, you can ventilate the room to provide a flow of fresh air, but this solution is difficult to be considered successful: in windy or cold weather, it is quite problematic to keep windows with open windows. In addition, the air in the room arrives uncontrollably.

Accordingly, for a comfortable stay in the house there is some kind of device with which air will continuously enter the room in the required quantity. For this purpose, and were created. One of their species, window valves, is embedded in the glass, so it is formed a narrow slot that regulates air supply.

The modern market presents a large range of ventlipans. Typically share several types of devices.

Manual

Aeroclap with manual control is cheaper automatic, but adjust the air flow manually difficult: because the required amount of fresh air strongly depends on the number of people and the condition of the microclimate indoors.

Automatic

The automatic valve on the window is more convenient. A sensor is built into it, which determines the level of relative humidity in the room. Due to the sensor, the device itself adjusts the amount of incoming air and determines when opening or close the vent hole.

Fold supply ventilation valves

The most fiscal option. Fresh air is served from the street into the house through special holes in the frame or sash. To install the valve, you do not need to dismantle the windows. Street noise practically does not penetrate the house. The main disadvantage of this type is low bandwidth: the room will still need periodic ventilation.

Slit valves on windows

With slotted ventilation, the air is supplied through the hole, the width of which is 12-16 mm, and the length is from 170 to 400 mm. Some models consist of one universal block, and some are of two blocks: one is installed on the inner side of the window, and the second is on the outside. The slot valves are high throughput, and the windows dismantling are not required for their installation, so they are quite popular in the market.

Pen with supply valve

Mounted instead of the usual handle of the plastic window. When installing the appearance of the window does not change in any way. Also, often the valve handle has a built-in filter element that blocks dust.

Overhead valves

This species among others is most effective. However, without dismantling the window can not do: the dimensions of the window flaps and the frames need to be "customized" under the device. There is practically no protection against street noise. Therefore, this species is more often used in warehouses and factories than in ordinary apartments.

According to the material of the manufacturer of the model are divided into wooden, metal and plastic.

If you do not count the onset valve mounting, there are two ways to install it: with milling (in the window block will have to do a hole; most likely you will need help from specialists) and without milling. The second method is the easiest, with it, you can install the valve on the PVC windows with your own hands in a matter of minutes.

You will need:

stationery knife;
cruciform screwdriver;
line.

On the frame cut the stationery knife part of the sample seal equal to the length of the valve.
At the place of the old seal, glue a new one - it comes complete with a supplit valve.
In the same way, remove the excess seal on the sash.
In the groove on the sash, where the previous seal was located, install the plugs from the kit.
Attach the valve to the top of the sash (the brackets must be directed towards the window). Secure it with self-draws from the kit.
Install the new seal between the brackets.

Ventclapan reviews are most different - from enthusiastic to aggressive-disappointed. Almost all users mark the same pros and cons.

Benefits:

Unlike microwing or venting, with open windows, there are no drafts in the apartment in the apartment.
Fresh air is applied continuously, which positively affects the microclimate of your home. The humidity in the apartment is normalized, the risk of occurrence and fungus on the walls is reduced.
The device is easy to install and use.
The likelihood of education on the windows is reduced.

Disadvantages:

In winter, some valve models are frozen.
If you have a manual valve, you will often have to regulate it depending on weather conditions, the number of people indoors (i.e., carbon dioxide levels in the air) and other climatic indicators. Since the valve is located in the upper part of the window, it may be necessary to get up on the chair or the stepladder to adjust the operation of the device - it all depends on the height of the windows themselves.
The device is usually not equipped with filters, so particles of street dust and other pollutants can enter the air.

As we see, the supply valves on plastic windows have both pros and cons. The question is naturally arising: is it worth the sheepskin? What else are there, which will provide the influx of fresh air and oxygen?

To compare, first it is worth identifying comparison criteria:

Performance.The performance of the ventilator is measured in cubic meters of air, which is supplied by the device per hour. On average, the adult consumes about 30-40 m3 / h. So, if in your family three people, you will need a device with a productivity of 90 cubic meters per hour. It is best to take an air ventilator in order not to overload the machine with constant work at maximum settings.
Noise.Low noise level is important for comfortable use of the conductor. The inconspicable level of noise is in the range of 30-40 decibels, at high performance, the normal level of noise of the conductor should be no more than 50-55 decibels. Also, when choosing a device, it is necessary to trace which sound comes from the conductor: intermittent noise will most likely be irritating hearing.
Filtration system.Air filters are not installed in each ventilator. If you want the air supplied to the apartment not only fresh, but also clean, the presence of the filtering system should be a decisive criterion for you.
Air heating system. Air heating is a necessary function for residents of cities in which winter is especially the Surov. With the help of the heating system, you can program the device for the air supply of a comfortable temperature.
Mounting complexity.Installation of the conductor is a process requiring accuracy and accuracy. Some types of ventilators are installed with their own hands, for some you need help specialists.
Cost. The price of the ventilator depends on the factors mentioned above - maximum performance, sound insulation, quantities and quality of filters, the presence of a climate control system, etc. Thus, the cost may vary from several hundred rubles to tens of thousands.

The climatic valve for plastic windows is the simplest and budget solution to ensure ventilation. Its installation does not require special equipment, through it fresh air enters the house, it does not make noise - only slightly increases the level of noise penetrating the room from the street. However, the possibilities of the device are not so great. Its performance is quite low - up to 35 m3 / h. The device is not equipped with filters and heating element.

Similar device has a wall trimming valve. To install it, you need to do a hole in the wall. As a rule, the performance of the wall valve is higher than that of the window (up to 50 m3 / h). Some models are equipped with a coarse filter, which prevents large dust indoors, fluff and insects into the air. Due to the errors when installing the wall on which the valve is placed, can freeze at low air temperature; No air heating system.

The mechanical ventilator is similar to a wall trimming valve, but it necessarily has a fan and more efficient filters. The performance of such a device is limited only by the performance of the fan (40-120 m3 / h). Nevertheless, such an aircraft does not clean the air from small dust and allergens; He also does not have a climate control function.

- The most effective intake ventilation system among previous options. The advantages of the bizer are in the presence of climate control and a three-step air filtration system. The recycling mode is also present in the brizer, that is, the device can clean the air inside the room. The device is mounted by experts by doing a small hole in the wall overlooking the street, and takes about an hour. The cost of the bizer is significantly higher than the remaining ventilation.
Below we led a brief comparative table of four ventilation devices (characteristics may differ depending on the model).

A distinctive feature of metal-plastic windows is the ability to maintain heat in a residential building. They effectively prevent sound penetration, cold, moisture. At the same time, these solutions do not allow the internal space of fresh air in sufficient volume. The only correct solution is to establish a trim valve on plastic windows. What kind of products are this, and what is their purpose?

Do I need supply devices at all?

Plastic windows have a mass of obvious advantages. They appreciated not only the owners of urban apartments, but also country cottages. That's just with all its "advantages" visually beautiful decisions of de facto worsen microclimate housing. Installation of the supply valves on the PVC windows is the most affordable and simple way to normalize the temperature and humidity regime, leveling the risk of mold formation, fungus.

So, what is this device and how does it work? A trim valve for plastic windows is a small solution that is customary to be installed in the upper frame of the frame. It is located in a strictly horizontal position, so that the exhaust function is implemented. The small valve not only levels the likelihood of condensate formation in the frame, but also contributes to the support of a comfortable microclimate.

Supply valves on the windows are advisable to use for a number of reasons:

in the process of its functioning, any thermal losses are excluded, the sound insulation level is preserved at the initial level;
in contrast to traditional ventilation, there are no drafts;
the window opening does not change in terms of light penetration;
the product can be easily installed, no problems occur during operation;
the device can be corrected at its own discretion.

Why do not need supply valves

Construction Features and Nuances of Functioning

The competent installation of the supply valve on the plastic window is possible only if there is an exhaustive understanding of the mechanism of operation of this device. In the process of assembly work, a plot with a rubber seal is removed from the window opening design, and like the sash and the frame. It is replaced with an additional layer of the seal and the supply device, which is delegated to the role of passive ventilation.

Decisions in this way make it possible to divert warm air to outward and exercise a fence of fresh oxygen into the room. This is achieved at the expense of the pressure difference. The system works under the condition that the temperature outside the window is not lower than + 5 ° C. Ventilation products in the sultry heat are powered due to the forced hood.

The valve on the plastic window includes a number of items:

outdoor design air intake (Mounted only with the outer side of the frame). A trump card that prevents penetration into the penetration of inside of moisture, atmospheric residues should be present above the most time.
compact telescopic canal - a small element combined with a window case and fixed by a special sleeve;
inner fragmentLocated inside the room. From the structural point of view, it is one of the most complex elements of the system, which includes: control mechanism (to adjust the air flow), filtration grille and exhaust nozzle.

Design device

There are a number of conditions necessary for efficient work in plastic windows:

operation of the main house ventilation channel;
the presence of a natural air exchange (small slots in the floor, in interior door);
tightness of the entrance door;
outside the temperature window is not lower than + 5 ° C.

Be sure to watch the video on the principle of operation of the supply device.

The transfer of the "Miracle of Technology" on NTV, about aircraft supply valves (Aereco)

There is a wide range of exhaust solutions for PVC windows. As for the differences between specific models, they are usually considered for a number of criteria.

Varieties of supply devices

Depending on the prevailing in the design material:

metal;
wooden;
plastic.

According to the method of intake of fresh air Inside the room:

Overhead solutions. Valve valve for plastic windows characterized by high efficiency. The key feature is the need to "fit" the framework of the frame and the glass unit under the exhaust device. Such products cannot be embedded in the finished window. The main scope of application is warehouse objects, manufacturing complexes.

Continuous-slotted structures. Air fence is carried out through 16-cm gap. Inside the room is a special adjusting unit, and outside the intake, preventing insect penetration, small particles and precipitation. To install, there is no need to dismantle the window. The product is characterized by sufficient high performance.

Fold products. One of the most affordable varieties of window. The supply of fresh oxygen is carried out by means of small cuts located in the focus. Solutions are characterized by good soundproofing, low throughput and simplicity of installation.

By type of management:

manual;
automatic.

note! The original designs in the form of valve-handles are in great demand. This product replaces the traditional window handle and does not violate the appearance of the outlook itself.

Step-by-step instructions for installation of the ventilation valve

Let us dwell in more detail on the nuances of the valve mounting with your own hands. For this event, no specialized skills are required, and in time the whole process lasts up to 40-60 minutes.

To install a trim valve on the windows with your own hands, you should prepare:

template;
dumping medium length;
complete valve;
stationery knife.

All listed items needed for installation of small products are present in the standard supplies set. The valve length does not exceed 35 cm. In addition to it, you will need 2 seals, the length of each of which is at least 16 cm, as well as the additional segment by 35 cm. For fixing the design, special attachments are used on self-drawing.

Stage 1. . Localization of the installation site. Window supply valves are customary to be placed in the top of the sash. Experts recommend noting the place in the middle of the design, and then attach a template to it and circle around.

Stage 2. . Reception of the seal. In the specified area, you must remove the standard seal. It is not fixed too tight and if you make small cuts by a stationery knife, then the rubber product can be absolutely free to remove.

Stage 3. . Installation of dowels-fixtures. In the free groove it is necessary to insert 3 dowel-locks. Their main purpose is the fastening of the valve body on the base of the sash. One dowel is shifted exactly in the middle, and the remaining 2 are placed around the edges.

Stage 4. . Installing the ventilation device window. To work it was more convenient, we recommend to the surface of the sash pre-apply double-sided assembly tape. The valve is located in the most preferred position.

Stage 5. . Fixing valve on the window sash. The ventilation product must be attached to the profile design using the screws (do not forget about dowels). This will allow enough to secure the product.

Stage 7. . Dismantling of the old frame seal. In order for the ventilation device to function properly, it needs to ensure the influx of clean air. To this end, experts strongly recommend refusing a typical seal, replacing it that comes with the valve. In front of the fixed valve, a segment is tested, the total length of which should be at least 35 cm. We dismantle the old seal with the subsequent replacement of the new one.

The sealer in the frame has the appearance presented in the image below. If you take a narrower seal, then a small gap is formed between the sash and the base of the frame, through which there is a fence of fresh oxygen. The window will remain operational.

This is considered to be completed. At its own discretion, you can adjust the oxygen inflow using a small engine. In the right position, the curtain will be open completely, therefore, the air flow will be maximal.

The device discussed in our article is a useful and necessary solution for each house, which allows you to improve the housing microclimate. Installation work, if desired, can be performed by the personnel without resorting to the help of specialists. Features of the installation depends on the configuration, design and specific valve model.

Helpful information

The installation of plastic windows can lead to a violation in the house or office of the microclimate: the increase in the humidity of the medium, the lack of oxygen and the edge air. Eliminate such problems easily with the help of supply valves on window openings.

The company TBM-Market has a large selection of window ventilators from leading Russian and world manufacturers. They normalize natural ventilation and stabilize air exchange in residential or non-residential premises.

Advantages of the supply valves

The valve consists of an internal controlled lattice with adjustment and an external visor. The last element blocks the falling in the house, is equipped with a protective net from small insects. Internal controlled item allows you to specify the amount and side of the movement of fresh air.

The features of window ventilators include the following:

the light zone of the glass pack remains free;
lack of drafts, like open window;
the flow of outdoor air passes organically, in full;
there will be no heat losses;
saving sound isolation;
you can set the work parameters, especially if it is automatic systems;
simple installation and use.

The vent valve looks like a narrow box, which is attached to the window opening crossbar. Internal parts, called feathers, are responsible for air inflow from the outside. With good weather, the device misses the air flow into the apartment, and with strong winds, the feathers block the getting of cold into the room. Due to the fact that ventilation is automatically adjustable, open windows to ventilation in the morning and in the evening.

Classification

Choosing a trim valve can be relying on the following criteria:

Product material:

metal;
plastic.

By type variations:

mechanical adjustment, where manually installed the desired level of ventilation;
the automatic option when the element itself determines the period of opening / closing the supply channel depending on the humidity, pressure jumps in the room, the number of people in the house, etc.

By type of air inflow in the room:

Fold mechanism when air flows pass through small holes in the gate. Dismantle the window does not have to, but the bandwidth of the valve is low, can suffer soundproofing qualities.
Slit systems, where air enters the room through a hole with a height of up to 16mm. Outside, the system is covered with a protective block from small insects and moisture. The inner part is represented by regulating sash. Installation is carried out on the top vertical or on the horizontal crossbar.
Overhead elements. Installation does not perform an already existing double-glazed window.
Wall-mounted mechanism, where the air exchange passes through the hole in the wall and the plastic pipe. It is expensive, but the effective device comes on sale already with forced heating or filters for air purification.

By way of installation:

With built-in valves that go along with PVC windows.
With milling when an element can already be purchased after the glass package is installed.
Without mounting.

Depending on the manufacturer:

Russia;
France;
Germany.

TBC market consultants will help you choose the window to ventilate to create an ideal microclimate in the house, office or production room.

Good to everyone and everyone separately!

One of my friendlies, different talking, increasingly began to complain about poor well-being. She, of course, is no longer a girl, but a lady in a solid age, but still go to work. And here and colds. Without opening the window, it cannot be breathing due to a stuff, and opening, falls under draft. I tried to find out if the trim valve is available in the window. It turned out that nothing knows about him. If you also hear about this device for the first time, then read further.

Questions of ventilation in PVC windows, or why do you need a trim valve?

The first thing that I want to declare is: I'm talking about the supply valve not for the sake of product advertising of your company, but to expand the circle of people who will know how to make the microclimate of the room with PVC windows as pleasant as possible.

Plastic double-glazed windows provide a room with excellent heat and sound insulation. But man can not stand around the clock in hermetic space and feel comfortableIf the room is not ventilated or not equipped with a good ventilation system.

Fiberglass manufacturers have long developed a number of ventilation devices to PVC profiles.

What is the task of the voiced additional elements? They provide the influx of fresh air for the ventilation of the room and remove from it contaminated. Valve models, like manufacturers, many, and today can easily find ventilation window add-ons from the Belgian company Titon, French Aereco or German Siegenia.

If we talk about ventilation products in more detail, then I relate to the maintenance device for small ventilation and compact discovery limiters, in their characteristics closer to fittings. Plug-in elements for PVC profiles, such as, for example, ventilation channels, valves, dampers with opening, have an appointment, but are subject to a separate classification. Choosing out of the range available in the availability, you need to know in advance which principle of regulation of ventilation devices - automatic or manual - it is more suitable for you. Not unnecessary knowledge, albeit superficial, on the principles of work at least some of the ventilation add-ons.

To begin with, I will tell you a little about ventilation plates and dampers whose variations are very much. They manually regulate them, their mechanism of operation is similar to the functionality of the opening limiters, but their presence must be provided by even when removing the measurements of window openings. That is how the fittings will not remove them and do not dress - these are separate details, built directly in the window designs.

When looking at the incision of the ventilation plank, it can be seen that this is a multi-chamber profile. How much do you need running through holes at the moment, so much and open. In this case, the intake of "oxygen" occurs on systems formed by the vented holes displaced relative to each other.

What are the cons of such ventilation planks? With disadvacted holes to the room, not only fresh air will come, but also street noise. Therefore, this type of ventilation device recommends only if the windows of the room go to the quiet street or if the presence of a noise background will not be considered a serious irritant factor.

Otherwise, it is better to choose a ventilation device in the form of, for example, a German noise-resistant air vetor of the Siegenia brand. With it, the air exchange occurs due to the pressure drop. The device controls due to the effect on the lever drive, which can be placed on any type of window frame.

Minus the design of the aeroms in the need to sacrifice 8 cm light opening along the top horizontal windows, since it is so much space will take a ventiiler between the double-glazed window and the profile. According to the manufacturer, this small problem and the device predicts high consumer demand among buyers aimed at improved glass accommodation in homes or offices.

The following object for study is a REHAU-Climamat, a ventilation valve, mounted directly on the window element. Its functionality allows you to control the volumes of the incoming air, adjust the degree of humidity of the atmosphere of the room and bring the climate of the room to the desired level.

At the same time, the product has small sizes and does not require disrupt the integrity of the window profile.

The main advantages of the valve:

silent control of incoming air volumes;
executes the role of the filter;
air flow is regulated by a special valve with several levels;
drafts will not disturb - the air distribution occurs in the vertical plane;
designed for any load;
not attached to a certain type of profile.

Valve automatic operation. The membrane existing in it silently moves out of position when it opens or overlaps air access. With moderate impact of the wind, the membrane does not interfere with the passage of the air mass. When an impact of the membrane changes the position moving by air flow. Therefore, with an increase in wind on the street, the room is not threatened with overweight heat. As soon as the impact on the membrane decreases, the passage of fresh air is resumed.

The valve was initially created with a guide frame for panel buildings.. The first device was submitted to the market in 1986 by Rehau AG, after a problem with ventilation was discovered due to the installation of translucent structures with plastic profiles.

The French company Aereco is the next worthy manufacturer of ventilation devices taking the ventilation on reasonable conditions. This manufacturer makes its models to equip tissue polyamide drives. The level of air humidity has an impact on the fabric stretching with increasing humidity and declining when the air becomes less humid. Thus, the dryness of the atmosphere of the room is adjusted, thereby disappearing the problem with excess water vapor, the formation of condensate on glass packages and mold colonies on slopes.

When choosing the Aereco valve, you will need to invite a specialist in the cutting of such devices in the window profile. When choosing the desired model, it is necessary to take into account the technical capabilities of each relative to noise absorption and air flow.

With Aereco, you can not be afraid of colds due to drafts - the flow of cold air is always directed towards the ceiling. With the full opening of the valve, the device provides sound insulation within 33-42 dB. The device is actively round, does not require an electrical connection, the valve comes into motion when the atmosphere humidity changes. It can be installed on a frame from any material, including wood. To support impeccable hygienic condition, it is necessary to clean the valve once a year without removing it from the frame.

Valve Aereco can be used even on the windows of residential buildings in the regions where winter is characterized by severeness. Despite the absence of heating elements inside the design, the formation of ice on it, due to the difference in the temperatures of the street and room air, does not occur. In this phenomenal feature of the device there is nothing mysterious: the incoming cold air acts on non-heated parts of the valve, preventing contact with them with warm air humid mass from the room. Therefore, the freezing does not occur.

If you think about stabilizing the level of humidity in the kitchen or bathroom, I can recommend the exhaust lattices of the same manufacturer.

As well as the device described above, they independently determine the degree of air saturation in moisture and when the desired level is exceeded, it starts to output it. For lovers, control such processes are provided for manual inclusion mode. If desired, the device can be supplemented with a fire system, a fan or filter. But even during operation, only the base option will breathe comfortable not only indoors with a source of increased moisture execution, but also in the entire apartment.

However, I will return directly to the valves for windows. In our capital, Aereco products are found on glass packages of various manufacturers. Since the installation of the product can be performed both when creating a separate design and on glass windows, already standing in window openings, without resorting to dismantling or replacing the frames. Therefore, today the service for adding the glass package by the Aereco ventilation valve does not surprise anyone.

The pleasant difference between this model of the valve, which when fixing on the binding (frame, improbate, clarifying or frame of frame-sash), the light opening of the window will not decrease. And it is this factor that can be determining in the decision to acquire this particular version of the ventilation supplement.

On the principle of operation of the Air-Box Valve for plastic windows, see the video:

Aerko ventilating valve

With an unpleasant consequence of the installation of plastic glass windows - excessive sealing, leading to an increase in air humidity level in rooms, the appearance of mold on the slopes of windows and walls of the room, the formation of condensate on the glasses with the arrival of the cold season, the consumer faced initially. Seeing one or more manifestations, people immediately began to blame on the problem of glass producers. Mall, plastic is poor quality or technology is incorrect, since there were no such problems from the windows in ordinary frames.

In fact, everything described happened for one reason - due to the lack of an adjustable air exchange process, which is why the moisture allocated by us during the period when we are indoors, it remains in the atmosphere of the room.

Many of us live in buildings where exhaust channels are provided only in special purpose premises (kitchen and bathroom). According to SNiPs and guests, an additional air flow acted due to the presence of microscins in wooden frames. Those. It turns out that all these drafts from under the windowsides and the frames were not only a consequence of their physical drying, but also accounting in projects, the necessary factor. Thanks to him, the tenants of apartments with normal heating did not come across such a phenomenon as mold on the walls and condensate on the glasses.

When installing plastic double-glazed windows, the air exchange through the microbes of the window frames stopped, so the entire moisture secreted by people during breathing in the process of cooking or washing, remains inside apartments and houses. There are also the other products of our livelihoods, albeit invisible for sight.

What remains in our homes except water vapor:

carbon dioxide falling into the atmosphere of the room at our breathing;
evaporation from the surface of the decorative finish;
smells from preparing dishes;

I would also bring Radon to this listThe representatives of SanEpidemadzor are increasing about the exceeding the rules of which in any dwelling with PVC glass windows without ventilation. This gas belongs to the inert group, it does not possess odor or color, but is a source of radioactive radiation. Doctors consider him a little less aggressive killer of people than Nicotine, leading to death from lung cancer. Radon is attributed to 8/10 from all household exposure falling on a person from home sources. Where does this gas come from in our homes? From building materials and land, so it is almost impossible not to get into the field of its rays. If only not to provide your home with high-quality ventilation.

We arrange the ventilation of the room with PVC double-glazugacket by venting

Modern plastic double-glazed windows have very convenient features.

In addition to ensuring complete tightness, they allow you to open the sash, as you think about it - completely opening, slightly open the upper part with the inclination on you, setting the slotted ventilation.

However, part of the hosts of houses or apartments with such windows reveals the windows in the old manner. Or at all does not ventilate the premises in the winter, seeking to keep such an expensive warmth in the house today.

The main causes of such behavior:

advertising, where it says that due to the plastic windows near the window opening, it does not blow anywhere, apparently, so worked for the subconscious, that people simply do not open the windows in winter (this aggravates the problem, because in houses with PVC structures needed);
slitual and ordinary ventilation can lead to the formation of drafts, and they are trying to avoid;
in theory, to keep in themselves normal working capacity and feel cheerful in the body, we need fresh air, at least 25 cubic meters per hour; To provide himself with him in such quantities, the room needs to be tired 5 minutes 24 times a day - naturally, no one is simply bothering about this;
street noise in some cities is so annoying people living near transport arteries that residents categorically do not want to open plastic windows even for mandatory ventilation (not everyone agrees even a short period of time to sacrifice 25 dB of noise insulation).

I do not argue, insulting, having spent very considerable money for double-glazed windows, completely eliminating you from street noise, tolerate it when you let fresh air inwards. Another moreover, when you expect to refresh the atmosphere of the room, and instead you get residues of smog.

In addition to this problem, the opening of the glazing sash in the usual or slot mode has a number of other negative consequences:

sharp change in temperature;
entering allergenic pollen and ordinary street dust;
creating hazardous conditions for a child, a pet;
the ability to suffer from intruders (especially relevant for residents of the first floors).

This is how the main reasons look like that having modern glazing in apartments, people suffer because of excessive humidity in the premises, but still refuse to conduct ventilation or do it too rarely. To break this closed vicious circle is easy - installing the ventilation valve. For example, such as AERECO.

It was designed to provide people with the opportunity to live in apartments with PVC windows in the most comfortable conditions. This is the only compromise solution for those who do not want to personally engage in multiple dwellings, but does not want to sacrifice health because of this. With ventilation valve AERECO fresh air will be included in the room even with constantly locked sash. At the same time, neither drafts or a sharp drop in the air temperature will occur.

Installation of automatic aircraft ventilation valve on the already installed window block in video:

All major advantages

I count them seven:

the valve provides up to 35 cubic meters of fresh air per hour (indoors with such ventilation a head will not overenex times, it is always easy to breathe);
aREO operating valve does not affect the soundproofing quality windows;
the valve will not be the source of noise and draft (the air flow will be directed towards the ceiling);
the ventilation valve is reliable in the fight against radon radiation, because it provides a round-the-clock supply of fresh air;
when studying the valve, it is not necessary to think that I bought a defective when you find the absence of a tightness - this is a technical solution to the problem of ventilating device;
the Aureko Valve is mounted in the area of \u200b\u200bthe through rectangular slit on the upper horizontal frame, so it does not affect the amount of light glass bandaged;
always and on any window you can put the AEREO valve, without removing the frames and not drinking extra holes in it (very convenient in the absence of a pre-installed ventilation system in the double-blade);
the AEREO valve will forever forget about condensate, mold, stuffiness and radon.

How to choose the right ventilation valve

Elegant design of the aircraft valve AREKO consider an additional bonus to excellent technical characteristics.

devices. Since, whether it is even a non-zeroshist, it should still be installed. After all, if it is presented, your house will leave a lot of problems of a sanitary and hygienic plan. The table will help to navigate the advantage of AEREO over the supply valves of other types and stamps.

Independently perform installation of the vent valve

I do not advise you to pay attention to the supply valves at a seductively low price and, moreover, trust the installation of the device with a random person. You can damage the glass, which will remain only dismantled and throw it out.

As for the cost. ARECO Valve in full configuration (I speak about the series of EHA and EMM), costs about 150 euros. Under full package, you need to understand the presence of the most ventilation device, the grid from mosquitoes and an acoustic visor. The product of the similar purpose of the Vent Air II is cheaper - 2000 rubles. However, the impeccable installation of both devices is possible only in factory conditions.

In practice, it looks like a rubber on the profile of a frame of a pair of through channels using an adapted milling unit. On the profile of the installed window, such a process will no longer - only similar, but it will not be any sense.

I admit that the stars smile to you, and you will meet a person, ready to install a trim valve on the window of one of the above models. Want, I will tell you how events will continue to develop and how will the valve editing?

To support the image of a professional, the craftsman will reach the incomprehensible type of the metal pattern, and then troliases it on the frame. It will make some marking or remember to one visible points to contact the worn device with the frame.

Armed with a drill, threaten profile, inhalesing in it not one dozen through holes - at this stage you can already say goodbye with the tightness of the profile.

After drinking each hole, the adjacent territory will be decorated with a portion of shallow metal dust and chips. Then, with the help of the jigsaw, through channels will appear, which will be brought to the "ideal" state of the usual file. The resulting holes will be covered with a supply valve, and it will cost this disgrace in an unknown how much - its size is limited to the conscience of the master.

For your own money, you get the disabled window under the guise of the modernized, bunch of dirt and the future to seek funds to the new glass. Avoiding such fate will help the acquisition of a supply valve that does not require the insert in the profile. For example, such as a product of Russian production Valve Air-Box Comfort. Installation of the product standing, on a second, only 400 rubles, does not require significant skills of ownership of male tools and is enough to know how to handle with a screwdriver. Detailed instructions in Russian significantly simplifies the process - you do and know that you do not invent a bike at your own fear, and follow the recommendations of real specialists.

Algorithm with an exemplary indication of time manipulation spent:

10.30 - free the coil space - prepare the working area;
10.35 - Find and put a sharp stationery knife and a screwdriver next to the window;
10.37 - Ripping window;
10.37 - Make the valve to the frame in the place where it will be installed;
10.38 - Do not cut on the sealing elastic itself, focusing on the outer edges of the valve;
10.39 - carefully removed the part of the seal, which noted with cuts;
10.39 - Insert the mortgage fasteners of the dowels where the velocity of screws for the installation of the supply valve are scheduled on the sash;
10.40 Crequaping three screws valve on the sash;
10.42 - Building two seals from the configuration to the ventilation device at the interval between the points of fasteners;
10.43 - take off the rubber seal on the frame profile in the place where the valve is worth, replacing the rubber band by the seal from the configuration to the ventilation device;
10.44 - replay how everything is beautiful and reliably.

All costs are 400 rubles and an incomplete quarter of an hour to work on installation.

What to expect from the Air-Box Comfort ventilating valve:

air permeability indicators - 10 Pa, cubic meters / hour 42;
soundproofing protection - RA, dBA - 32;
an indicator of the ability to hold the heat m2 * OC / W - 0.58;
overall parameters 350x32x13 (in mm);
RAL on request;
panel color white.

AIR-BOX COMFORT Valve - this is a guarantor of your comfort.

Feedback on the operation of the Air-Box Comfort Supply Valve in Video:

Are there any windows of your apartment to breathe at night?

A man has little roof over his head, he seeks to create a maximum comfort in his home. The comfort of the atmosphere in the house depends on the heat of air, its humidity and speed of movement. If all the parameters are normal, inside the house breathes, it works and relaxed easily. When there is a breakdown, for example, due to lowering the volume of oxygen, problems begged with the overall well-being of the inhabitants of housing. The person also reacts to an increase in humidity or volume of unobistant for human sense of smell, but still real evaporations from furniture, outdoor coating.

What to do in this case? To establish the process of manual or automatic ventilation - the portion of fresh air from the street will quickly lead to normal the state of the atmosphere of the house. It will be abandoned by carbon dioxide, highlighted with our breathing, fresh and not very flavors of food will be destroyed, the balance of moisture in the air is leveling. All these processes are described in one word - ventilation.

Without it, it's not even when there is no one in the apartment or house. Everyone in the atmosphere of the house has the ability to breathe, even the process and differs from what we used to understand under this term. The result of the air of the dwelling is filled with moisture from aquariums, plants, breathing in the house of pets. But the volume of water replenishments in this case is small and with their conclusion to the street will cope with microbes of apartments available in walls, window and doorways.

By the time the hosts return home, the moisture level is kept at the base indicators.

The value of this parameter affects many factors. Among them, the degree of cooling air outside the house, the number and power of the heating devices inside it, the presence of controlled and uncontrolled household sources of moisture.

Excess moisture in the air is also harmful as its deficit. But with the arrival of the heating season, the relative humidity of the atmosphere of the apartment can drop to 15%, which is very harmful. Then you need to think about installing the device, to saturate the air of the room moisture.

However, the situation with the water balance in the room atmosphere changes dramatically with the arrival of the owners. Evaporation from wet clothing, people's breath, hygienic procedures, washing, lead to an increase in moisture concentration. With the sink of activity, humidity falls, but significant saturation changes occur only when conducting. In the morning everything is repeated and in the air again is filled with moisture due to our habitual action: cooking breakfast, hygienic procedures.

If it seems to you that people with breathing are not so much moisture, I will say only one thing: during the dream, one person exhales near the liter of water. Multiply this volume on the number of households. Now it is clear why in the morning the apartment is sometimes reminded of a sauna? And excess moisture in the air is not only a small discomfort in breathing, but also a headache, a sense of breakdown.

In general, take control of the level of humidity in the house in your hands. If you like to gather a large family from the TV in the evenings, you can ventilate a room both before the home movie session and after. Before bedtime, if you want everything in the mornings, everyone was vigorous, and not sleepy chics, too, do not forget to run a portion of fresh air into the bedroom.

Of course, it will be necessary to spend money on warm air warming. However, it is impossible to neglect the ventilation due to savings considerations. Those citizens that pay for a communal without taking into account the personal actual expenses of energy resources, somehow do not think about the connection: more often carry out, we spend more energy resources for heating at home. What you can not say about the persons who have switched to individual counters.

No matter what category of citizens your family belongs to to the issues of heat energy, it is necessary to approach consciously. Even the inhabitants of the multi-storey house can increase the level of heat in their apartments without having direct access to the valves to regulate heat supply in the battery.

The easiest, but non-losing efficiency way is to eliminate the points of unauthorized rooting of heat into space. This is achieved by insulation of windows, doorways, replacement of light curtains on dense curtains. If the boiler room works not so actively, as you need, you can not do without an additional heating device.

I can offer a more modern way to solve the problem of heat leakage from the house - the replacement of old frame structures on modern PVC double-glazed windows. In addition to the ability to stand in faithful guard on the protection of room heat, modern windows are qualitatively protected from outdoor noise, dust. But for no hope, in the absence of a built-in ventilation system, such windows become a source of humidity problems and contribute to the passion in the atmosphere of the apartment concentration of radon, carbon dioxid, unpleasant odors.

As a result, you begin to notice that:

pVC windows windows are covered by condensate (especially in the cold season);
on snow-white slopes, then there are spots of mold appear;
in the apartment then there is a foolness.

What is the reason? Old wooden frames were the so-called cold bridges through which the heat accumulated around the street flowed into the street. But through the same cracks left the room not only an extra moisture, but also seeded fresh air. With the installation of PVC double-barakers, all these holes disappeared. The habit of often to air the house is not available. As a result, stationary ventilation moves in the bathroom and in the kitchen cease to cope with the load and the house, and at the same time you with your family, begin to suffer from manifestations of high humidity.

If there is a good habit at no less than once a day to air the room, problems due to plastic double-glazed windows may not arise. At your disposal, even when buying a basic configuration of the window, the ability to open the sash in the same way as was done with the window in the window with a wooden frame, or rotate the sash in the inclined plane or use the slotted ventilation. About the same opening limiters should not be forgotten.

Starting airports:

stone so that during the ventilation into the zone of drafts, neither you nor some of the loved ones;
be ready to suffer a little from street noise, even with a slotted ventilation - the soundproofing level for this period will fall to 18 dB with slotted ventilation and up to 9 dB - with usual;
do not leave an open window without supervision, if you live on the first floor and do not have a protective frame on the opening (at night, do not even think to go to bed, not locked the window);
do not leave the opened window unattended if the houses are children, a cat, birds outside the cell;
with high humidity in the room or a large cluster of people in the apartment, open the sash more often than usual (if someone is against, try to explain the cause of your love to the manipulation with the window).

Of course, establishing new glass windows from PVC, you hardly hoped for the emergence of a new duties. Most likely, the manager offering windows did not tell about them. And on the question of the dangers of a complete tightness of the residential premises, in response, you heard, I think only about the provided for the micovestation of windows.

Yes, some kind of outdoor air will penetrate the room through the channels in the window profile - they are specifically made at the factory. However, these receipts may only fight, for example, fogging glass. But these miniature channels are not able to provide the needs of your family in the fresh air. Think itself: SNOPU is needed to update the atmosphere of the room at a speed of three cubic meters of air per hour per square meter of residential area. Can such a volume of air masses leak into the tiny holes of your window profile? Therefore, the ventilation process must be constantly supervised either independently or with the help of auxiliary devices.

The presence of fresh air in the house is the guarantee of the health of each of its inhabitants, the basis of well-being in all its manifestations. After all, without having a shortage of oxygen, we are cheerful, with less effort solve the existing tasks. Yes, just glad the arrival of the next morning, and do not fight with the desire to stay forever under the canopy of blankets.

If serious health problems so far, thank heaven, did not happen, but you are worried about the sudden appearance of mold on the slopes, then you are not nervous in vain. This is one of the first manifestations indicating the presence of a problem due to the tightness of plastic glass windows.

So far, other unpleasant surprises followed, take the case to organize the right ventilation of the room under your control.

Even if there are no extended lines in the existing windshop, the situation is corrected even without radical methods. And constantly pay attention to the fortakes, breaking them and locking them every hour, also do not have to. Everyone has already thought out, came up with and even made up before you realized that you need to do something with the manifestations of excessive moisture in the house.

With problems because of hermetic windows, all owners of apartments or houses with installed double-glazed windows are facing.

The value of the latter does not affect their ability to resist the accumulation of excess moisture. It matters only the presence of the supply valve or the habit of carrying out full ventilation several times a day.

What are hinged ventilation systems? All models can be divided into embedded in window profiles when assembling structures at the factory and on the windows hanging on ready-made double-glazed windows. The last type eliminates the need to spend money on reinstalling the glass windows of a new sample with pre-installed ventilation valves. When choosing the second, I recommend choosing models in which ventilation will be carried out automatically. Otherwise, the running to the supply valve will be different from the runner to the window flaps for the formerization in the usual format?

To work independently of control from your side, you need to configure its response to some specific parameter. It is most convenient to focus on the index of the atmosphere of the premises. After all, its level is most often jumping both due to our natural livelihoods and as a result of the actions that we often perform at home: we are preparing, erased, we dry clothes after forced walking in the rain.

If you take control of this very humidity, in addition to universal improvement in well-being, in the course there is a problem with the appearance of mold on the slopes and walls, the windows will stop moving.

In order not to provoke problems with well-being due to permanent hopping hopes that control its devices for windows need to be selected from the product line with hygroregulated automatic systems. Then the stabilization of humidity will pass smoothly and around the clock, without an unnecessary consumption of room heat.

For more than 20 years, the French manufacturer of aircraft ventilation systems has been supplied to the market automatic supply devices of humidity regulation. Models of EN and EMM are able to work offline format and without the help of exhaust grilles. But then you have to pay a little more on electricity bills.

Products are small, can work on structures from any material.Do not reduce the volume of incoming light, as they place them on the frame itself, the equipping profile from the inside and outside. Even when working at full power, they do not allow street noise to make you, since their the index of the arrangement of sounds varies within 33-42 dB. Especially pleased that the device is not necessary to interfere in the profile device or disable windows.

In operation, these supply valves are very convenient and not to be formed to drafts, since they send the incoming air towards the ceiling. In the homeland of plastic windows - in France, and on the rest of Europe, these devices have long been exploited. And, I think it's time to develop the culture of the right use of plastic glass packages. After all, they were created for our comfort, and not for the opportunity to add problems to our lives.

How to solve the problem of ventilation after installing PVC windows, see the video:

Features of the supply valve

Plastic packages have taken root. After all, with their help, it is possible to provide silence even in an apartment emerging with the windows on the busy highway, reliably protect your house from drafts, cold and precipitation. However, there are one minus that prevents enjoying the functional PVC windows - because of them the premises become hermetic and the process of natural air exchange observed in the apartments with wooden frames is reduced.

In plastic profiles, there are no microcracks through which the apartments received quite solid portions of fresh air. Therefore, the modernized apartment needs to be ventilated either by opening the sash to your handles or with the help of special supply devices.

Any modern ventilation valve on the windshop becomes a solution of a number of problems.

Among them:

stabilization of humidity level in the room;
half pains of households due to the rise of the atmosphere of the room with breathing products, evaporation from the surface of the household items.

How is the ventilation valve

This invention is for installation on a plastic window (top horizontal) so that in this place through the barrier profile profile passed small amounts of air: fresh inside the room, stupid of it.

In addition to the device for mounting into the upper window, you can use structures to insert into a stubborn joint, which is available between the frame unit and the wall, in the window itself or into the space between the sash and the PVC glass pump.

In the case when the supply device is available, but the problems with mold and excessive humidity did not disappear, then you will be authoritatively state that you bought and put a fake valve. Therefore, show attentiveness, choosing a similar product, do not rejoice in the opportunity to save greatly. Most likely, the low price of the valve, this is an indication that you are trying to sell fake.

We carry out the installation of the construction

There is nothing complicated in the valve installation if each step corresponds to a specific point in the instructions. All you need is the valve itself, a normal and comfortable screwdriver, a sharp stationery knife. Supportless canopies that need to be installed using milling, it is better not to put independently - a professional will not only make it all beautiful, but also will retain the "life" of the glass pack.

Indisient advantages of the ventilation supply device:

it can be put on any frame (wooden, aluminum, plastic);
it does not attend the light-permeability of the window, since it does not reduce the volume of incoming light;
the working device does not reduce the soundproof of the glass unit;
fresh air will enter the room around the clock (it is necessary even if it is outside the winter window);
under the injection of the air, drafts are not formed - the air mass is sent to the ceiling (thanks to this, neither you nor someone from your loved ones, which means that no one will sacrifice health in favor of the desire to maintain normal humidity in the room);
fresh air flow does not lead to significant heat loss.

Information about the supply valves in the video:

Types of valve

To improve double-glazed windows, the market offers wooden, metal or plastic supplies. All this mass you can divide into two groups: manually controlled and operating automatically. The first are equipped with a special coat, without which to get to the device, located at the top of the glass package, not very comfortable even to a high person. The second requires only the initial setting of orientation parameters, and then the valves themselves are disclosed and closed as needed.

Work on the basis of pressure accounting occurs with the help of a special curtain equipped with upper suspension. With a strong wind, the curtain crawls up and reduces the volume of the air entering the room. Work on the basis of moisture metering depends on the testimony of a special sensor in which there are nylon tapes. When wetting, they force the valve to open, during the drying of the ribbons there is a reverse process.

Intervene in the operation of the device designed to work in automatic mode, I urgently not advise - The risk of achieving the freezing of the room and the output of the valve is out. All product developers have provided, so you need to relax and folded the powers responsible for fresh air in the room. The device itself will determine when the moment comes to exchange air between the room and the street.

In order not to miss the selection of the valve under the already standing window, choose the product with technical parameters as close as possible to similar window characteristics.

Care

The device of the intake ventilation device is simply called, before disgrace, therefore, periodic manipulations for cleaning the valve from dust and dirt are unlikely to cause difficulties.

All you need to do is, it is periodically once a year or two to remove the main layer of pollution with a vacuum cleaner. The surface of the case will have to wipe the wet cloth somewhat more often, focusing on the presence or absence of traces of flies, other types of pollution.

No more wet than a hygienic napkin, I do not recommend using, because the washing or abundant wetting of the valve can turn it out of failure. Use for wetting napkins aggressive chemistry and even ordinary water is impossible. When carrying out repair work in a room where the window has a vent valve, it is necessary to cover something.

Put the ventilation valve will be able each

Installation of the ventilation valve does not require professionalism - It is enough to be able to properly use a screwdriver and a stationery knife, but have 15 minutes of free time.

Before starting the installation, remove everything from the window sill to save the lives to all the subjects lying there and exclude the possibility of inappropriate damage to some part of the glass package.

First, make a product to the profile and a knife make cuts on a sealing gum, indicating the valve boundary. Cuts are coarse, and then exhaust the resulting segment of gum.

Insert a dowel into the holes under the screws, covering the valve to the sash, and then tighten all three methols in them. Between the fasteners insert rubber seals offered in the configuration to the product.

Installation

Why are plastic windows become popular? They are an irresistible barrier for outdoor dust and moisture. But thanks to its technical characteristics that provide tightness, the windows prevent the windows, and rather eliminate the possibility of natural air conditioning. The consequences of this you watch after a couple of days after the final installation of the glass package in the frame: glass designs begin to be covered with condensate, and puddles begin to grow on the windowsill. Starting and mold will begin to appear on the slopes, if you do not solve this problem with some kind of radical way.

Regular control over ventilation is not for everyone - we are too busy everyday affairs to open the window to launch the next portion of fresh air. And in winter, such procedures do not really want to do when frost on twenty degrees and the wind north.

Setting the valve on the window, solve many tasks:

you do not need to throw on current affairs and distracted by the processing procedure;
the flow of fresh air portions is carried out when the atmosphere indoors contains an excess percentage of moisture;
carrying occurs in safe for all mode.

What is the trim valve?

If your window "put" condensate tears, and the slopes bloomed the spots of mold, then the solution is one: urgently push the air conditioning.

Then quickly get rid of manifestations of excess moisture. Where does it come from in a room with heating and a reliable roof?

Here are the main sources of moisture:

the resting person highlights about 40 g of fluid per hour;
a working person highlights about 90 g of fluid per hour;
one medium-sized floral vase is a source of 10 g of water per hour;
all water tanks per hour are supplied to the atmosphere of the room to 200 g of fluid;
when cooking, drying the wet underwear, a wet cleaning of the atmosphere of the apartment is hourly gaining up to 1000 g of water.

Only one small valve on the double-glazing can easily eliminate the atmosphere of the room from excessive moisture reserves. If he does not cope, then either its installation was performed with a violation of technology, or you bought a fake.

How to mount?

Each domestic wizard can cope with the installation of the supply valve for ten minutes. From the utility tools you need only a screwdriver, and the stationery knife. Naturally, the valve is in full configuration (with 350 mm rubber sealing cords).

In order not to persuade when the rubber is removed in the frame frame, you first need to make measurements and set the markup where the valve will stand.

After freeing the sealer, put the valve first at this place, and then the seal from the set to the product. Yes, you only need a sash that can be moved.

Having understood with the sealer site to be removed, carefully remove it. In this place is now clearly visible to the groove where you need to insert three plugs from the valve. Then removed from the device the upper strip of the two-way tape and the sticky plot of attaching to the place where the plugs are already available.

Using small self-tapping screws, screw valve, screwing them into the plug. Try carefully to move the device. If it sits reliably, you can glue the sealing rubber.

Terms of use

Each ventilation valve to the plastic window is an adjustable device. At the location in the extreme right position, he skips air. Physically, it is possible to determine, bringing hands to the hole - the skin must feel the movement of the air. To close the valve, it needs to be translated until it stops into the left position.

Ventilation valve installation technology in video: