Like chicks a mosquito net on a plastic window. Installing mosquito nets on windows

Plastic double-glazed windows are found in almost every home today. Many owners have to face the need self-assembly mosquito net - a protective device that prevents flying insects from entering the living quarters. Flies, bees, mosquitoes and wasps can deprive anyone of sleep, so a protective mesh sheet is a necessary measure with the onset of warm days. How to choose and install a mosquito net on a window?

A little about the design of mosquito nets

The traditional elements of a mosquito net are the following details:

frame profile and impost reinforcing it (plastic jumper with metal reinforcement inside);
connection corners;
fastening cord;
corner profile;
plastic or metal fasteners.

The mosquito net requires minimal maintenance.

It is easy to attach and remove.
All dirt can be washed off with soapy water and a stream of water from the shower.
The mesh is lightweight, resistant to UV radiation and temperature changes.

Modern mesh fabrics are produced by the most different forms, but they have one function - to protect rooms from dust and insects.

Popular types of insert meshes for plastic windows

The choice of mesh sheets to protect windows and doors from annoying mosquitoes is quite large. Of the variety, the most popular models can be noted:

frame structure. It is the most affordable and simple, can be sliding or removable. If the area of the window opening is large, a mosquito net is installed with an additional reinforcing bar in the middle;
mesh mounted on plungers directly into window hole. Its advantage is a higher resistance to environmental factors. For example, strong gusts of wind;
Velcro mesh. A popular model among those customers who do not need permanent protection from flying insects. This protection can be removed at any time without outside help;
mosquito net mounted on hinges by the type of door opening. The closed position of the structure is provided by special magnets;
roll type mesh. According to the principle of operation, it resembles roller blinds. The canvas is unwound and assembled back into the box, installed above the window opening;
pleated mosquito net. This is also a roll type of construction, but it is assembled in a horizontal plane (similar to an accordion). The advantages of such nets are a wide range of colors, the possibility of decorating the canvas decorative elements and patterns.

Varieties of mesh fabric - gallery

Mosquito net with Velcro - a great option for use in the country Hinged mosquito net used for plastic windows and doors Roll mosquito net folds up, looks aesthetically pleasing and saves space Pleated mesh can be made in different colors

Fasteners for mosquito structures

Installing a mosquito net on a plastic window involves the use of one of 4 possible types of fasteners:

The plunger is a metal pin with a spring that can be adjusted in length. The most expensive and most reliable type of fastener.
"Checkbox". Such fastening is considered the most short-lived. This is a small plastic hook that is easily torn off by gusts of wind.
Z-shaped metal corner. Mounted on the frame from the inside, used when internal installation mosquito net.
Plastic corners. Their main plus is that the window opens and closes freely during the operation of the mosquito protection.

How to put insect protection on frame fasteners

If the mosquito net is already equipped with Z-shaped fasteners, the installation algorithm is as follows:

Align the grid, positioning it so that the mount is on inside. They put fasteners with a large hook up, and down with a small one.
Insert mosquito protection into the window opening.
Raise the net as high as possible.
Get a big hook on the top edge window frame.
Fasten the mesh tightly by lowering the lower hooks.

Fastening with plastic corners

A feature of this method is the installation of the structure on the fasteners of the window opening. Procedure:

Make the necessary measurements of the window opening.
Make preliminary markings on the outside of the window frame for future fastening of the corners. Fixation of plastic corners from below is carried out 1.5 cm below the window opening.
Measure a distance equal to the height of the mosquito net + 1 cm. This is the location of the upper corner.
Fix the corners with self-tapping screws.
Install the structure according to the scheme: lifting it all the way up, inserting the corners into the grooves, attracting the mesh to the opening, lowering it down.

Grid size for outdoor installation differs from the plug-in design. The height should be 1 cm, width - 2 cm more than the size of the window opening.

How to attach the mesh to plastic corners made by yourself - video

Plunger option for installing mosquito structures

The peculiarity of plunger installation is that the mesh is installed in the window opening itself, and not inside or outside. To fix the plunger, a hole is drilled into which the pins are inserted.

Plunger mesh installation process:

As many holes are drilled on the window opening as there are plungers on the mosquito net profile.
Reciprocal levels are fixed in the holes.
The plunger is inserted. To do this, press its head towards the mosquito net.
When the pins are fixed on one side, the second side of the grid is fixed in a similar way.
In conclusion, a sealant is glued to the frame of the mosquito net, which increases the degree of protection against small insects.

Is it possible to install a ready-made mosquito net on a wooden window

Installation of the finished mesh on a wooden window is possible if the dimensions of the structure and opening match. In this case, the procedure is similar to that used for plastic windows.

If you pick up a ready-made mosquito net for a window country house difficult, but ordering production according to individual project expensive, you can assemble mosquito protection yourself.

How to make a protective insect net yourself - video

When buying a mosquito net, you must carefully study the mechanism for its installation. For example, plunger structures must have the size of a window opening and are not always suitable for consumers with non-standard plastic windows. The owner must think over all the issues of the upcoming installation of mosquito protection in advance and choose the most suitable option.

Kirill Sysoev

Calloused hands do not know boredom!

Content

I really want to open the balcony and windows with the onset of warm days, so that Fresh air. A problem arises: numerous insects - wasps, flies, mosquitoes - are activated at the same time. If you put mosquito protection, you can easily fix the situation.

What are the fastenings for mosquito nets on plastic windows

Anti-mosquito frames are popular because they protect the room from external influences. You can order them immediately when installing windows, or install them later. Over time, deteriorate and require updating and replacement of old structures. Due to the low price, the installation of the product is unprofitable for specialists from firms. You can understand how to install a mosquito net on plastic window, change it yourself. With the help of such protection, you can protect yourself from the effects of:

rain, snow;
dust, dirt;
mosquitoes, midges.

Before you learn how to install a mosquito net on a plastic window, understand the design features and fastening methods. Often used and affordable option with a frame. To assemble such an anti-mosquito structure on your own, you will need special tools, skill, and dexterity in work. It is more profitable to order it to specialists - you first need to measure the internal opening of the installation site, and then install it yourself. The necessary holders can be bought inexpensively in the online store or purchased from the same company.

The low price is different type, which is attached to the opening with Velcro. When replacing old structures, you can use in modern ways protection. How to fix a mosquito net on a plastic window? There are fastening methods:

plunger - fixed with pins;
sliding - moves away on skids;
door - the design is equipped with hinged hinges;
rolled - unwound from a special drum;
installation of hooks;
fixing mounting angles;
fixation with magnets;
rotary structures;
spring-loaded pins into the inner opening.

How to securely install a mosquito net on a plastic window when animals live in the apartment? Special reinforced fasteners will protect the cat, even if it jumps onto the structure after a flying bird. A more durable model of the anti-cat system will protect your pet from injury. If you do not tolerate dust well, you can install a structure with the smallest cells that do not let it through when replacing. For the sunny side, it is good to hang a device with a reflective coating. This will keep the house cool.

How to put a mosquito net on a plastic window

deal with installation work within the power of any person holding a screwdriver. Figure out how to install a mesh on a plastic window using mounting brackets. You will need fasteners - two upper and two lower. For clarity, see the photo:

Parts are attached to the window with self-tapping screws with outer side. To get the job done, you need:

measure the inner opening;
order a finished frame with dimensions 20 mm larger than the received dimensions;
purchase accessories.

How to attach a mosquito net to a plastic window? We follow technology:

set aside from the outside down from the opening 30 mm;
at the top we mark the size of 40 mm;
we make risks from below from the side of the opening inside with a distance of 20 mm;
we apply a smaller bracket, aligning the inner shelf with the lower marks on the window;
fix with masking tape;
fasten with screws;
repeat the operation from above large brackets, installing the inner shelf according to the markup - it should look down.

It will not be difficult to install the structure in place. Instructions for inserting it correctly:

it is necessary to take the frame out of the window, holding it by the handles;
with a slight inclination, bring it up to the stop against the shelf of the bracket;
align vertically;
lower, put on the shelf of the bottom bracket;
to remove, you need to do the operation in reverse order.

Prices for installing a mosquito net on a plastic window

Figuring out how to install an anti-mosquito frame on your own is not easy, and sometimes not at all. Get acquainted with the prices for work offered by firms in Moscow for orientation. One installation is estimated from 350 to 800 rubles. The total cost does not include delivery and the call of a specialist to measure the dimensions. Price spread for square meter to manufacture and install the design is:

for framework - 1200-1500 rubles;
sliding - 2500-2800 rubles;
rolled - 3500-3800 rubles;
type "antikoshka" - 1700-2000 rubles;
"anti-dust" - 2400-2700 r.

Video: installing a mosquito net on a plastic window yourself

If you are going to protect your apartment from mosquitoes and other insects, see how to install a mosquito net on a plastic window yourself. Help to understand the features of measurements, essential tool and mounting video instructions. You will learn how to insert a mosquito net into a plastic window, you will see little installation tricks. Everyone will understand why repairing and installing mosquito protection on their own is more cost-effective than ordering installation by specialists.

Did you find an error in the text? Select it, press Ctrl + Enter and we'll fix it!

The long-awaited spring brings with it not only fresh air that enters the apartments through the wide open windows. Spring is also the time of the year when the invasion of all kinds of insects begins (and, unfortunately, continues until the onset of cold weather), trying to take a place next to a person.

Open windows, not closed ventilation ducts- this is the main entrance for mosquitoes, flies, and sometimes bees.

A natural solution, arising from the desire of a person to choose for himself who has the right to be in his apartment, was the invention of such a simple but indispensable addition to windows as a mosquito net.

Protective mesh for PVC windows and doors

In the wooden windows of the old sample, the vents were open throughout the warm period of the year. The owners of apartments, in order to prevent insects from entering the housing and leaving poplar fluff on the other side of the window, attached gauze to the windows. It turns out that the mosquito net is a new accessory from the “well-forgotten old” series.

On the principle of operation ends what is common between modern mosquito nets and gauze on old windows.

Plastic windows, which have become widespread and universally accepted, are mostly opened by opening the entire sash or tilting it to an inclined position. This led to the need to refine the gauze version to meet the requirements of modern conditions.

Adjusting to these requirements, we had to make the grid easily removable, interchangeable, invisible from the side of the room or from the street.

The frame on which the mesh is stretched was also made convenient: it can be disassembled and stored in this form.

During one season, so much dust accumulates on the grid that if you do not wash it off, then not only mosquitoes - even fresh air will hardly enter the room. The collapsible frame is very useful here: after removing the mesh, you can safely wash it, like the same gauze.

The door to the balcony, which in the summer (like the window) is quite often open, has always been a separate headache in terms of dealing with insects and poplar fluff. But even here a competent solution was found - this is a swing mosquito net.

A similar swing option is a mosquito net stretched over a frame the size of doorway. For rigidity, the frame is reinforced with one or two crossbars. In principle, a hinged mosquito net is a prototype of a door, only this door is designed to stop not people, but insects and street dust.

For wide doorways, where it is not possible to install a frame, a protective mesh was invented, rigidly fixed on all sides except for the place where it touches the floor. In the middle of such a grid there is a cut, which, passing a person or an animal, closes itself tightly thanks to the magnets located at the edges of the cut.

It would seem that it is impossible to come up with something else that is radically different from the standard sample of a mosquito net stretched over metal carcass and fixed with rigid fasteners on the window frame. So they came up with a swing option, so they made a grid on magnets, and that’s it? No, the inquisitive design thought did not stop there.

On sale there were protective nets for windows in the form of roller shutters or blinds. Such structures can not be removed, sent for storage in winter period. It is enough to twist them into a roll, and they can be in this position until such time as there is no need to use them again.

Unfortunately, not only mosquitoes try to enter the premises through the window and doors. Sometimes a mosquito net attached to a door or window opening, becomes an obstacle for a cat or dog living in an apartment. In the fight against these representatives of the animal world, the mosquito net suffers a complete defeat.

But smart heads also worked on this issue, creating a mosquito net with a protective PVC coating applied to it. Such a grid, due to its purpose, received the appropriate name - "Antikoshka".

Instructions for assembling a mosquito net in the video:

Varieties

Mosquito nets are not just window nets that protect against blood-sucking insects.

According to their functional abilities, they can be divided into several types: standard, most often used frame mesh, stretched over aluminum frame:

mesh, which is a roll, unwinding along guides fixed on the window frame;
hinged, having loops and opening by type ordinary doors. It can be mounted both on a door or window frame, and in a window or doorway;
magnetic mesh. Installed in doorways and does not interfere with the passage of humans and animals;
mesh folding in the form of an accordion in a special case- "pleated";
mesh coated with a special anti-vandal coating;
a mesh that protects against the penetration of fine dust into the room. It is recommended for installation in rooms where people suffering from seasonal allergies to the flowering of various plants live.

Briefly define the main types mosquito nets, then the list will look like this:

framework;
roll;
pleated.

Ways and means of fastening

Because there are different kinds mosquito nets, it is natural that they came up with different ways fastening to the carrier base.

These methods might look like this:

an option in which the size of the mesh frame matches the size of the sash. Such a frame is mounted on plunger pins;
if the frame is larger than the opening in the frame, in which the sash is located, then it can be fixed on the outside of the frame on special ears. Previously, the ears themselves are screwed to the frame with screws;
the second option for attaching the frame larger than the sash- on hooks that are fixed on the frame itself and cling to the frame during installation;
horizontal guides fixed on the window frame, along which one or two mosquito net frames can move, freeing the window opening;
rolled mosquito nets are installed on the upper part of the frame and unfold, moving along the vertical guides fixed on it;
sliding nets with magnets can be fixed to the frame with adhesive tape;
frames can have curtains and be mounted on the frame, opening free access to the premises;
pleated mosquito systems with a complex mount, the device of which can only be entrusted to a specialist.

All these methods of fastening can be systematized according to the main defining features:

fastening on plunger pins;
on hooks;
on the ears;
on tape;
roll system with fixed vertical guides;
frame system with horizontal guides;
pleated system.

Mosquito nets wearing additional functions(for example, "Antikoshka") are usually used in a standard frame version and always have several additional fasteners. This is done so that the animal, which can use the net as a support, does not fall out into the street with it.

Almost all options for mosquito nets installed on plastic windows are suitable for use on aluminum and wooden windows.

With a clear variety of mesh types and options for their fastening, it becomes difficult to determine which mesh is best to install in this particular case.

To answer this question, you need to figure out what functions the barrier in the form of a mosquito net should perform.

If you just want to prevent insects from entering the room, then the standard frame option is the cheapest way out.

In cases where it is necessary to close sliding balcony frames, it would be appropriate to use the frame option in which two mosquito nets move along horizontal guides, changing places with each other like sliding wardrobe doors.

If there is a danger that the mesh could be damaged by a pet, then the version with a regular mesh should be replaced with a mesh of increased strength.

How to handle

It would seem that the main purpose of mosquito nets is protection from annoying midges, but this is only one of the functions performed by this type of protective device.

The mosquito net, among other things, can even serve as a regulator of air flows entering the room through open doors and window openings. If there are grids on all windows in the apartment, then with gusts of wind they will stop the speed of air movement, protecting the residents of the apartment from the danger of getting a cold.

In addition, out of nowhere, the layer of dust that appears on the furniture will practically cease to appear if nets are placed on the windows, designed to prevent the appearance of midges and mosquitoes, but also having an additional anti-dust function.

For allergy sufferers, this type of mosquito net will help not only make their apartment cleaner by putting debris and dust in the way reliable barrier, but most importantly, it will help maintain health, leaving the very cause of allergic reactions outside the window.

The only condition for the complete fulfillment of the Anti-Dust mosquito net of its main purpose is to stop the penetration of fine pollen flowering plants, is a periodic maintenance of its surface.

To do this, you need to wash the grid itself with soapy water and only after complete drying, install it in its place. If the mesh is installed without letting it dry, then the dust will immediately stick to it, clogging all the cells, and the cleaning process will have to be repeated again.

There is no fixed time after which the mosquito net with an anti-dust function has to be removed. It all depends on how quickly this mesh loses its ability to pass air freely. In cases where the room in which meshes of this type are installed are located on the lower floors of buildings, and trees grow nearby or a busy highway passes, they have to be washed quite often.

How to properly install

The easiest and most affordable way for the average user to install a mosquito net is to fasten it with hooks. The hooks themselves finished version are already attached to the mesh frame, and the entire installation process consists only in positioning the frame in place, where it should be, and turning the hooks into a position perpendicular to the frame.

No tools and special devices it is not used.

The device of all other methods of fastening, more precisely, the fixation of their elements, is best entrusted to professional installers.

The “pleated” system, in which the mosquito net is deployed, taking on a working state, without the use of special tools and skills are impossible to make.

Attach the ears to the frame outside also not easy. After all, for this you need to accurately calculate the amount of tolerance required for the free exit of the frame between the upper and lower fasteners.

Yes, and the process of tightening the screws pressing the ears to the frame will have to be done, half leaning out of the window opening.

Similar difficulties will be encountered when installing horizontal guides for sliding frames.

Even for installing a mosquito net with plunger pins, you need the right calculation to mark the exact location of their installation and a tool that can drill grooves to fix the pins.

Video instruction on how to remove a mosquito net from a plastic window:

How to remove without problems?

In order for the removal and installation of the grid not to become a problem, the methods of its fastening must be chosen the most convenient. Such as, for example, fastening with hooks or on plunger pins.

Mosquito net frame that is attached to the frame balcony door on curtains, is also removed with a simple action. To do this, it is enough to lift the side of the frame where the hinges are located, and they will easily come out of their attachments to the frame.

Since the mesh, which is used on doorways, has to be constantly closed and opened, special handles are attached to it for convenience. For a snug fit, seals are installed on the frame, into which the frame itself is fixed.

On frame-type nets, fastened on ears, hooks or pins, plastic holders are inserted into the frame from the inside, allowing you to hold the net when it is installed in its place.

To remove the mesh, which is standardly fixed on the outer side of the frame, you need to lift it so that the lower horizontal bar of the frame comes out of the lower lugs, then the bottom of the frame should be brought out and, lowering, remove the frame from the upper lugs. The vacated mesh can be returned to the room.

To return the mesh fixed on the hooks to the room, you need to turn the hooks along its axis to the position along the frame, while not forgetting to hold it by the plastic holders.

The mesh on the plunger pins can be quickly removed by simply pulling on the pin heads to release them from their sockets. Once again, the vacated net must not be forgotten to be held so as not to run after it into the street.

Mosquito nets that move along horizontal guides, despite the seeming complexity, are released from the guides as simply as with the lugs. In exactly the same way, you need to raise the frame and remove it from the bottom of the lower mount - this allows you to make a gap that is between the frame and the upper guide.

The most difficult in terms of dismantling are roll-type mosquito nets and the pleated mosquito system. Their periodic maintenance has to be done without removing them from the mounts.

How to fix without errors?

If you decide to independently install a mosquito net on the “ears” mounts, then first you need to take the necessary safety measures when working at height, since you need to work halfway out of the window. After marking for the installation of fasteners, you need to select screws of such a length that they are screwed only into the plastic and do not rest against the metal frame inside the profile. The length of the optimal screws should be no more than 20mm.

There are guides for the movement of the frame, which are attached with double-sided tape. In this case, you need to especially carefully make the markup. If a mistake is made, then it will be impossible to fix the incorrectly installed and once dismantled guides a second time.

In case, however, plastic profile holes were drilled by mistake, they need to be repaired. For this purpose, a special liquid plastic is used. But if this material is not available, then you can close the holes with ordinary white silicone.

About installing a mosquito net without handles on a PVC window in the video:

Frame mounting options

The first option is the easiest and safest., is provided to those owners of premises whose windows are at a height of free access from the outside. To implement this option, you do not need to risk leaning out of the window. It is enough with the help of a stepladder, attaching the grid to the frame, mark its contours and screw either ears or guides relative to them.

The second option is that you can not immediately screw the mount-ears, and, after sticking a double-sided adhesive tape, use it to install them on the marked place and check the accuracy of the marking by installing the frame. These actions will protect the profile from the appearance of holes on it, left due to erroneously applied marks.

Most reliable option is to involve specialists in the installation of mosquito nets. Such a service is provided in combination with the installation of a window, provided that the installation of a mosquito net is included in the list of activities indicated in the contract.

If the need for a mosquito net arose after a window or door was installed, then, as a rule, such a service is provided by manufacturers of nets, providing their specialists for installation.

Can I install it myself?

Problems that arise when open doors and windows, force many people to take action to eliminate them.

The easiest way out is to tightly close the opening that causes inconvenience. But instead of some problems, others come, sometimes more serious than dust and mosquitoes.

Mold and fungus may appear on the walls of the room: they are always in a hurry to start up where there is no good ventilation. Micro-ventilation, available when installing almost all plastic windows, cannot eliminate this trouble.

There are only two options for dealing with poor ventilation of the room:

tie-in to window profile special air valve providing sufficient air exchange in the room;
installation on an open door or window opening of a mosquito net, which does not impede the movement of air and eliminates the problem of an open window or door.

Lightweight and durable mosquito net does not disturb general view of the window or door on which it is attached, because the color of its frame can be matched to the color of the profile. So that the mesh itself does not catch the eye, it is mainly produced in light gray, although options are possible at the request of the customer.

If desired, you can easily get the grid itself from the frame. To do this, pull out the rubber sealing cord, which is inserted into the groove located on the inside of the frame-frame. This cord secures the edges of the mesh, preventing it from slipping out of the groove.

Having taken out the mesh, you can disassemble the frame itself by pulling forcefully on the strips at the joints.

Due to the fact that the frame is collapsible, it is not necessary to buy a new product in case of damage to the canvas itself. You can buy a new piece of canvas and insert it into the old frame.

If it was decided to do without the help of measurers and installers, then before proceeding with measurements, you need to carefully consider how the plastic window is located relative to the outer slopes.

Sometimes the upper profile of the window, deeply recessed under the slope, does not allow to place “lugs” on it. There is simply no place for this.

The same trouble can be expected if it was decided to install a rolled mosquito net on the side profile, which is almost completely hidden under the side slopes.

If the profile moves away from the slopes to a distance that allows any type of attachment to fit, then you can proceed to the next step - measuring the frame of the future mosquito net.

For the frame, which will be attached with the help of "ears", you need to measure the width and height of the opening in which the sash is located, and add three centimeters to these dimensions - this will be the desired size of the mosquito net frame. The frame must come with fasteners and screws for fixing them. If there are no screws, then you need to find those that meet two requirements: they must be made of stainless material, and their length must not exceed 20mm.

A set of fasteners "ears" consists of four pieces: two of them differ from the other two in length. Those mounts with a smaller shelf are placed at the bottom of the frame, and those that are longer hold the top of the frame. This is done so that the gap in the upper "ears" allows you to raise and take out the bottom of the frame.

The size of this gap must be measured very accurately - it is he who is responsible for how securely the mosquito net is held in its mounts. Also, a correctly calculated gap will make it easy to install and remove the grid.

For self installation mosquito net is best to use the option with hooks. All steps for installing the hooks can be done indoors, because the hooks are attached to the frame of the mosquito net itself. The finished mesh will only need to be carefully installed in the window opening, activating the hooks and turning them around its axis.

Tips for using a mosquito net on PVC windows in video:

Does it make sense to install?

It cannot be said that a mosquito net is the most necessary invention for a person, and one cannot do without it. It is quite possible to hang gauze on the window, and on the doorway plastic tape, scaring away all living creatures. It's certainly cheaper than buying and installing a mosquito net. But the whole question is whether such methods will be as effective and convenient as the mosquito net used for the same purposes, or, correctly speaking, mosquito net, is effective and convenient.

It must also be remembered that in addition to its main function (not letting winged insects into the room), there are additional functions that such a grid successfully copes with. Among them: the ability of a fine-meshed canvas to keep small dust formations, to restrain drafts, to stop pets from flying through an open window.

Any of these functions is already worthy in itself to install a protective mosquito net on a window or door for its sake.

Unlike ancient methods such as gauze or tape on a window, the mesh fabric is almost invisible in an open window opening. In addition, mesh is a reusable, easy-to-use product that has applications to suit different requirements.

The mesh can be in the form of a roll, in the form of an accordion, simply stretched over a frame or with magnets to fix it behind a passing person (mesh on a doorway). Those who wish can always choose the option that suits each.

And at the same time, it requires minimal care - as it becomes dirty, it must be washed with soapy water, and this is the whole simple care procedure.

Step by step installation

The best option for installing a mosquito net would be to install it complete with a plastic window. Separate ordering and departure of a specialist will cost more than complex services. In addition, sellers of plastic windows often have promotions for which a mosquito net can be received as a gift.

But if you have to order the manufacture and installation of the grid after the plastic window has taken its place, this is also not a big problem. In this case, there will be advantages. The distances from the glass to the side and top slope will indicate which type of mosquito net (frame, roll) and which type of fastening is best suited for a particular option.

In order to order a mosquito net and install it yourself, you must sequentially take the following steps:

free the window sill and window opening from foreign objects;
open the sash and determine which part of the upper and side slopes is not covered by the outer slope. If they have a free distance of 3 cm, then you can start measuring;
with a pre-prepared tape measure, you should accurately measure the distance of the opening in the frame in which the sash is located;
it is best to give the obtained dimensions to the manufacturers of the mosquito net for processing. They will calculate exactly how to change the data in order to ready product fit perfectly into the window opening. This option is especially good when the customer does not know exactly which type of fastening is better to choose. Each mounting option has its own tolerances to the main size. But if you decide to do the calculations yourself,
then for the method of fastening with the help of "ears" it is necessary to add three centimeters to the obtained dimensions of the height and width of the opening;
in order to fix the finished product on the window frame, first you need to make marks corresponding to the places where the fasteners are installed. The location of the two lower mounts should be such that the lower edge of the mosquito net frame installed in them is one and a half centimeters below the opening of the sash;
from the lower mount shelf, you need to measure the distance to the upper mount shelf. This distance should be one centimeter greater than the height of the grid frame;
on the marks obtained, it is necessary to install fasteners with the obligatory condition that the fasteners, in which the shelf pressing the frame, which is shorter in length, are installed at the bottom of the frame. To fix the fasteners, you need to use stainless steel screws.
The installation of the grid itself is not particularly difficult. To do this, securely fixing the mesh with plastic holders, first insert it into the upper mount, lift it up to the stop, and, pressing it against the frame, lower it into the lower mount. If the tolerance between the fasteners has been calculated accurately, then the mesh frame will take its intended place without any problems.

About the types of mosquito nets in the video:

Mosquito net and its installation on the window

To determine which of the existing technical means best suited to stop flying insects trying to enter the house through the window, you need to understand the range of products offered.

For this purpose, you can use fumigators, special light devices that destroy insects, adhesive tapes and much more. However, each of these means of dealing with annoying living creatures has its drawbacks: fumigators can have a negative effect on aquarium fish, lighting fixtures consume electricity, sticky fly tapes hung around the house are unlikely to give aesthetic pleasure to anyone.

But there is a competent solution to this topical issue every spring - this is the installation of a barrier in the form of a mosquito net in the way of insects.

Sometimes mosquito nets installed on the windows of residential premises can be seen even in the winter season. This does not mean that the apartment owners forgot to put the grid away for storage. Some people need nets on windows at any time of the year, because in addition to protection against insects, they also have other functions. Such nets can not only not let them into the room, but also not let them out of it (for example, a cat or a hamster that walks along the windowsill while the owner ventilates the room).

If the mesh fabric is covered with a special protective composition from polyvinyl chloride, then it can be forgotten for more than one year, leaving it in the window frame.

After all, she practically does not interfere with looking at the street. The mosquito net becomes noticeable only if it is left unattended and allowed to become covered with a layer of dust. But this problem is easily fixed with soap and water.

If there is no need to use an anti-allergic version of the mesh cloth with a small mesh size of 1mm 2, then a cloth with holes of 3mm 2 can be used. This will significantly increase the time between those moments when you need to take action to care for the mosquito net.

Mosquito nets can differ from each other not only in the cell of the canvas, but also in the shape of the cells. It is believed that the canvas, in which the cells are rectangular, transmits light and air worse, but is stronger for tearing and cheaper in cost. A canvas with hexagonal cells is recommended for use in places where midges and small midges are common. This is due to the fact that a hexagonal cell transmits light and air twice as much as a rectangular cell of the same size.

It is difficult to install a mosquito net on the frame only for the first time, since it is necessary to perform several steps for precise marking and subsequent fastening of accessories that fix the mesh frame in accordance with the selected type of fastening. For this reason, it is better to seek help from specialists who, having installed the grid, will explain to the owner all the conditions for its further operation.

You can not ask for outside help if you use the easiest installation method, it does not require any measurements or special tools.

The mosquito net, not stretched over a metal frame, gave the name to a new method of installing mosquito nets - frameless. One side of the Velcro is glued to the window frame and connected to the other part glued around the perimeter of the canvas. This is the whole process, the complexity of which is only that the tape on the window matches the tape on the canvas.

For entrance doors

The requirements for door mosquito nets are very different from those for window nets. The door mesh should allow people and animals to pass freely, while blocking the path of flying insects.

Since the requirements for these nets are different, the approach to attaching them to the doorway is also somewhat different.

For this purpose, you can use nets equipped with magnets - they do not impede the passage of people and are an excellent barrier to insects.

Such mosquito nets are attached to the door frame with burdock Velcro on the sides and top. The bottom of the net and the place of passage have bipolar magnets, with the help of which the edges of the net, having passed a person, instantly slam behind him.

There are other ways to install mosquito nets on doorways.

One of them is called "pleated". This method consists in folding the mosquito cloth into an accordion and fixing it in a special box. This method is used for large openings that cannot be closed by applying other approaches to the installation of a mosquito net.

A more common way to close doors with a mesh is to install on door frame a frame with a stretched mosquito net, which is attached to the frame with the help of special curtains.

The disadvantage of this option is a short service life, since the aluminum frame can be easily damaged.

Both in "pleated" and in swing version The mosquito net has two common serious disadvantages compared to the net with magnets. While a person enters, he needs to spend a few seconds to open and close the doors, and sometimes this time is enough for those whom the grid should stop to enter the room with him.

DIY mosquito net

There is an emergency solution to the problem of annoying insects getting into the room, if an unforeseen situation suddenly occurred, and the frame with a mosquito net removed from the window received mechanical damage and cannot be placed in its place.

To do this, you need to get the canvas out of the frame by pulling on the rubber cord that fixes the edges of the canvas. Then remove the sealing gum from the window frame. Insert the edges of the canvas into the freed groove and secure them with a clothesline. There is no doubt that the canvas will fit in size, because the mesh frame is only slightly larger than the sash opening.

In the event that there is a ready-made mesh in working condition, but the fasteners that should hold it are not yet fixed, the following actions must be taken:

try on the frame to the opening, which it should cover. If it hides behind the frame for 1.5 cm on each side and does not rest against the outer slope, then its size corresponds to this window opening;
mark a place for the lower mounts with a short clamping shelf so that subsequently there is enough space to lift the frame up by 1 cm and at the same time it does not rest against the slope;
mark the place for the upper mounts so that they are 1 cm higher than the frame;
after the marking process, it is necessary, observing safety measures, to install the fasteners in the places intended for them.

After that, it remains only to put the net in the mounts, holding it by the special holders installed on the sides.

The task of installing the mesh is greatly simplified if you need to secure the mesh with Z-hooks. First you need to find the main hook, which should be the first to cling to the frame. The main one is the longest, it should be on the short side of the frame. This hook must be placed behind the upper inner ledge of the window frame, while the frame of the mosquito net should be on the outside of this ledge.

Next, holding the frame securely, you need to turn the lower hook on the inner ledge of the window frame and lower the frame down. After the frame is in place, you can fix it by turning the side hooks.

Installing the mesh on the balcony frame

The mosquito net can be installed on the outside of the window - these are fastening methods using "ears" and "hooks", as well as the "pleated" system and roll-type nets.

It is allowed to install the grid in the frame - fastening on plunger pins.

The only way to fasten a mosquito net installed on a frame indoors is in openings with sliding frames. This is due to the fact that this kind of frame does not have protruding handles that can damage the mesh web.

As a rule, two frames are installed on the balcony, which can move, changing places with each other. For their movement, two guides with two grooves in each are attached to the inside of the frame. Inside these grooves, mosquito nets, moving along the entire length of the balcony, can occupy any place.

Due to the fact that the installation of the rails is accessible from the side of the balcony, the installation of this type of fastening of mosquito nets is not considered too difficult. It is quite possible to produce it yourself, just by correctly marking the places where the guides should be attached.

Door mosquito nets

The main difference between the two main types of nets that cover doorways is where the canvas is located - framed or not.

A mosquito net is considered a frame if it is a constituent element of the pleated system or stretched over a frame, which is attached to the door frame with curtains.

Representatives of frameless mosquito protection are nets in which the edges of the cut after the passage of a person are interconnected using magnets or Velcro.

Frameless screens are easy to install and convenient to use, which cannot be said about framed mosquito protection door samples.

To put additional door from a mosquito net, you need to take actions similar to installing a door leaf in a door frame.

What type of attachment is the best?

All existing methods mosquito nets meet main goal– block access to the premises of small insects. In order for this function to be 100% fulfilled, all types of mosquito barriers have been developed, the essence of which was detailed above.

The most popular frame mosquito nets are those that are attached with hooks and Z-shaped fasteners (“lugs”). They are easy to install and also easy to dismantle. Affordable price also plays a big role.

A roll-type mosquito net will cost more, and its installation will not do without the help of a specialist.

The purchase and installation of the pleated system is the most expensive pleasure in the range of mosquito control devices, but at the same time, the most convenient.

The cheapest mosquito barrier is a frameless canvas with Velcro. But after several removals from the window to remove dust, the Velcro stops sticking, and the question of how to protect the room from mosquitoes becomes relevant again.

We must not forget that mosquito nets can also carry additional functions - help allergy sufferers survive the flowering time of plants, and can also stop small domestic animals from traveling out the window.

To determine which type of mosquito net is better than the rest, you can only carefully read the available materials on this topic, or carefully read this article, which has all the data for analysis.

The great Russian poet A.S. Pushkin wrote about the importunity of insects: “Oh, red summer, I would love you if it weren’t for ... mosquitoes and flies!” Indeed, in warm time you can’t hide from insects even at home if its windows don’t have reliable protection. By installing a mosquito net, you will forever forget about these problems.

Benefits of mosquito nets

Mosquito nets for windows can be purchased online, like any other product. This is not only profitable, but also convenient. When ordering something, a prudent buyer always tries to evaluate the pros and cons of a future purchase. By installing a mosquito net, you will forget:

about unpleasant mosquito bites which are especially unpleasant for children; . pesky flies flying over dining table;
poplar fluff that flies into the apartment in June;
small debris that can enter the house through the window.

Services for the manufacture of window nets are now offered by many companies.

If you decide to entrust the installation of a mosquito net to a professional, you can not worry about how to measure correctly, what type of nets to prefer and other difficulties associated with installing it on a window or doorway. If you don't want to wait for the master - pick up a tape measure and start measuring! The easiest way to measure a mosquito net is to find out the height and width of the opening window sash. It will suit you if, when opening the window, from the light opening to its edge, there will be at least 25 millimeters on the side and at least 35 millimeters on top.

What you need to know when deciding to install a mosquito net yourself

In order for the mosquito net to be installed correctly, you will need the advice of professionals:

the mesh is attached to the window from the outside with the help of special upper and lower fasteners, which are sold with it as a set;
so that insects cannot penetrate the gaps between the mesh and the window, it must go onto the frame;
you can also find out the size for ordering the grid in this way: having measured the height of the light opening, add 3 centimeters to it, and do the same with the width.

How to install a grid on a window yourself

When you have the mosquito net, proceed with the installation of the mounts. It will take no more than a quarter of an hour and takes place in several stages:

1. the lower (smaller) fasteners are installed - mark with a marker or pencil the points located 2 centimeters below the light opening and fix them with electric drill or a screwdriver;

2. measure the length of the mesh from the installation site of the lower mounts and add 1 centimeter - this will be the place where the upper mounts should be located;

3. Check that the fasteners are secure by gently pressing on them.

Now you can install the grid itself.

The instruction prescribes the following actions:

grab the handles and pull the frame out of the grid;
put the top fasteners inside the frame;
fasten them over the seal;
fasten the bottom brackets in the same way.

Window mesh installed! As you can see, this is not so difficult to do. It is removed in reverse order.

If you have any questions, you want to order a mosquito net or invite a measurer, we are waiting for your call!

Sale of mosquito nets. All for 300!

MOSQUITO NETS WHITE

№	Width	Height	Qty
1	335	1015	1
2	390	1390	1
3	405	660	1
4	430	1110	1
5	434	1115	1
6	435	1250	1
7	437	1264	1
8	438	1065	4
9	485	1045	1
10	525	1060	2
11	530	1114	1
12	545	1150	1
13	565	985	1
14	580	2035	1
15	588	1215	1
16	595	1312	1
17	595	1245	1
18	604	1055	1
19	620	1025	2
20	655	1110	1
21	690	1450	2
22	695	1213	1
23	795	1268	1
24	800	1370	1
25	900	1215	1

A mosquito net on a plastic window is faced by many, as soon as the fly comes into legal rights. Midges, awakened after a long hibernation, strive to fill all the rooms, climb into all the cracks, beat against hot lamps, not to mention the annoying mosquitoes that interfere with sleep. And in the heat, you really want to open the window wider, especially in the evening, when the heat of the day gives way to the coolness of the night.

However, before opening the windows, it is worth installing mosquito nets and preventing the possible penetration of harmful insects.

Ready grids

In any store a la "everything for the home" you will find ready-made mosquito nets. They close the windows well, the main thing is to choose the appropriate size. But at the same time, they also have disadvantages. For example, having purchased for a frame, you will be faced with the need to get it every time you need to close the window. Also, if we are talking about plastic windows, you will not be able to open them for "ventilation", leaving the grid in place. Therefore, before buying a finished frame, think again about how to install a mosquito net on a plastic window, while avoiding a lot of unnecessary actions?

DIY mesh

Stretch the mesh on the frame right size you

you can at home, which, however, will not solve the problem of removing it from the window opening every time you need to close the window. An interesting alternative is to use a grid without a wireframe. on without using hard inserts? Very simple. Installing such a grid will take no more than fifteen minutes! To do this, you need to buy a mosquito net desired color and size in any hardware store, Velcro tape (textile fastener), silicone-based glue or double-sided tape. The length of the skein of textile fasteners is determined along the perimeter of the window frame.

Making a grid

The first step is to cut out the mosquito net that will fit the size and

the shape of your window. Second: we attach one half of the Velcro to the mesh with glue or Of course, it is more reliable to use glue - it provides better adhesion and does not leave unaesthetic marks. The third step: we glue the second half of the textile fastener to the perimeter, and it is advisable to place it as far as possible from the edges of the opening itself. In this case, it is also optimal to use glue: even if you need to remove the Velcro, it will not leave marks on the frame. What to do next is obvious: carefully apply the mesh so that the textile fasteners match, and enjoy the mosquito net, which protects against midges and does not interfere with the full functioning of the window frame. So, the question is: "How to install a mosquito net on a plastic window?" resolved.

At the end of the season, such a mesh is easy to remove, wash and put off until next summer, and textile tape easy to clean with soapy water. As you can see, everything is quite simple.