How to make a flowerpot out of wood. How to make outdoor flower pots with your own hands? Instructions and photo ideas

Decorative flowerpots will make the design garden plot finished. They can be purchased at garden centers or made with my own hands... Consider ways to make a flowerpot with your own hands from various materials.

do-it-yourself flowerpots. Photo master class

Do-it-yourself stump pot

To make a street flowerpot from a stump with your own hands, you first need to pick up suitable tree... This can be a thick stem or a small driftwood. The decorativeness of the flowerpot depends on the shape of the tree and the texture of its surface.

They begin to make a flowerpot with their own hands with the definition sizes. Optimal height is forty centimeters. The excess is cut off with a chainsaw. In this case, it turns out even cut and the bark, which adorns the surface of the future flowerpot, is not damaged.

A circle is marked on the surface of the hemp. Internal content drilled out using a cone-type drill. First, holes are made ten centimeters deep around the entire perimeter, then the wood is knocked out with a mechanical chisel and the walls are finished with an ordinary chisel.

do-it-yourself flowerpots for the garden. Photo

The inner surface of such a garden flowerpot is processed stain... To do this, the composition is poured into a small glass and applied with a paint brush to all surfaces of the product, trying not to leave unpainted areas. Additionally, you can use various decorative elements.

The resulting chumps nail down to the dried and processed bottom. For it, you can use a saw cut suitable in diameter. The parts of one circle are connected to each other with a construction stapler with inside... The next row is placed so that the seams are constantly displaced. The rows are also connected with a stapler.

outdoor flowerpots from the stump with your own hands. Photo

We put a clay or plastic container inside the resulting flowerpot suitable size... We pour soil into it and plant flowers

Concrete garden pot. Master Class

From cement with the addition of other components, you can make both large flowerpots for flowers with your own hands, and relatively small ones.

To make a flowerpot big size would need plastic mold with parameters 53 cm in diameter and 23 cm in height.

Solution we make from two parts of white cement, one part of perlite (agroperlite) and two parts of high-moor peat. You can take a one and a half liter bucket as a measuring container. A mixture of three components is diluted with water until a thick mass is obtained.

do-it-yourself flowerpots made of cement. Photo

Since such a flowerpot will be quite heavy, it is better to do it right away in a permanent place.

To make a pot of cement with your own hands, we take a plastic pot, which is a form, and line it thin film... The cellophane must be straightened so that incomprehensible folds are not imprinted on the surface.

First, spread the solution to the bottom. The layer should be about four or five centimeters thick. Matches or toothpicks are great for controlling thickness.

To increase the strength of such a large product, you can install metal wire frame or other reinforcing structure. You can add about a handful of chopped fiberglass to it to strengthen the composition. Since the flowerpot is large enough, and knead large volumes cement composition hands are difficult, then you have to do it fractionally. It will take about four or five batches.

Do not forget when making garden flowerpots with your own hands and about drain hole ... It is made by placing a cork wrapped in a film on the bottom.

You can make this pot multicolored... For this, the cement mixture is divided into parts. Various dyes are added to them. The multi-colored mixture is placed on the inner surface one by one, which makes the finished container colorful.

After the entire surface is lined with the mixture, the product is closed cellophane film and leave for about ten days. During this time, the cement mixture will harden and gain strength. If the product dries out too quickly, it will need to be moistened.

After eight days, check the readiness. To do this, tap on the surface of the cement. If the sound is not deaf, then the flowerpot is removed from the mold along with the film.

After brushing, the flowerpot is washed with water and slightly dried. Further, his words are wrapped in film so that the mixture continues to harden.

After about a week or two, the material will take on a lighter shade. This is a sign that it is time to remove the film, and put the flowerpot in its final place.

Small flowerpots made of cement

From such cement mix you can also make small flowerpots with your own hands. For them, take any form. It could be old fruit vases, flower pots and buckets, basins and dishes. Manufacturing technology is the same as for a large flowerpot.

Flowerpot on a leg with a curly surface

To make such a flowerpot with your own hands, use a mixture of the following components. Take one part of gray cement, one part of vermiculite and two parts of high-moor peat.

As a basis, take a wire fan frame and five-liter plastic bottle cut at the desired height.

The fan frame is lined with foil. It will take three layers so that the mixture does not squeeze too much between the rods. After the mixture hardens, you get the original carved surface. It only needs to be lightly brushed with a metal brush and the do-it-yourself cement pot is almost ready.

Flowerpots from car tires. Step by step instructions

For decoration personal plot you can also use practically junk materials, for example, old car tires. To make flowerpots from tires with your own hands, you should choose raw material the right sizes... Winter studless rubber, which is softer and thinner, is best suited for carving.

do-it-yourself flowerpots from tires. Photo

Consider how to make a flowerpot out of tires with your own hands, similar to a flower. To do this, first draw a contour with chalk on the side of the tire.

When the petals are cut on the tire, small longitudinal cuts are made. They are located at a distance of five or ten centimeters from each other and facilitate the process of everting the tire.

It is not easy to turn the product out. It requires physical effort, but after being turned out at least small area, the process is accelerating.

After that, it remains only to decorate ready product... There are other options for making flowerpots from tires with your own hands.

DIY plastic barrel garden pot

From a large barrel of one hundred and fifty liters, two containers can turn out at once. To do this, in the middle of the barrel, mark the place of the cut, along which they cut into two parts jigsaw.

The edges process special tool so that there are no burrs.

Outside, two are attached to the bottom. bar to make the pot easier to move.

The resulting workpiece is sheathed wooden planks... They can be positioned end-to-end or overlapped.

The nails are driven in with a special pistol. From the inside, they are bent with a hammer.

Upper rim made from planks connected at an angle. Fasten it with nails and glue.

The wood trim can be varnished or painted in a suitable color. The pot is ready, you can plant flowers in it.

Vases made of silicate blocks with several tiers

This design option looks impressive and makes even the most familiar plants unusual.

The cavities inside the blocks are great for planting and growing plants. Some manufacturers even began to produce special hollow elements for landscape design.

To make outdoor flowerpots from silicate blocks with your own hands, you should think over the design so that it is stable and has enough space for plants. Further, the necessary material is acquired.

The blocks must contain drainage, so that excess water goes away. The base is chosen strong enough.

The base is glued to the bottom of the silicate blocks. Then the structure is assembled from the resulting elements. The blocks are connected to each other using glue.

Gradually building the tiers, it is necessary to fill the lower ones with earth.

Small flowerpots made of sticks

For work you will need thin sticks for example from ice cream. They are glued to wooden cubes.

By repeating the processes, three more sides are made.

Then sticks are glued on top on both sides.

The surface of the resulting container is sanded and painted.

It turns out a small flowerpot in which a container with flowers is placed.

DIY styrofoam pot

Polyfoam is a common material and people are often interested in how to make a flowerpot with their own hands from it.

First cut out rectangular blanks for walls that are glued together with self-tapping screws. Then the container is covered plaster mix in several layers with reinforcement plastic mesh... When the mixture is dry, the surface is cleaned from irregularities. The next stage is painting. After that, it is applied finishing layer decorative plaster... The product looks like it is cast from concrete.

A pot from a pallet. Master Class

You can make a garden pot with your own hands from wooden pallet. To do this, it is carefully disassembled into boards.

All boards with a length of 80cm are cut in half. Boards 120cm long, mark them into three 38cm pieces and cut them, making a beveled cut at an angle of thirty degrees.

We connect boards with oblique cuts using self-tapping screws. It turns out a hexagon. We attach a leg to each of its boards.

Similarly, we collect the second hexagon.

We collect the bottom of the flowerpot. To do this, we attach a transverse board between the legs. We put the bottom boards on it and fasten them to the edges of the hexagon with self-tapping screws.

It turns out robust construction, which should be treated with an antiseptic. You can decorate it in any way.

Do-it-yourself flowerpots made of cement and fabric for a garden are an original find that can decorate any backyard landscape. Despite the fact that they appeared in the courtyards only a few years ago, the history of the existence of such decorative elements began quite a long time ago.

The use of outdoor flowerpots made of concrete in landscape design dates back to ancient gardening art, the works of which were housed in palaces. In the front alleys and parks, exquisite bowls made in the Baroque style were an obligatory attribute. Little by little, such flowerpots began to occupy an honorable place in the landscaping of city parks and gardens, public buildings, ceremonial. Concrete outdoor flower boxes are widely used to decorate the entrance to the house, areas intended for recreation, outdoor terraces... In gardens, they play the role of small architectural forms- their use in the landscape allows you to slightly dilute the monotonous unity of the green grass carpet and create attractive visual accents.

Show all

Manufacturing of concrete products

To make concrete flower girls on your own does not require any special labor-intensive actions. You will need to first stock up on ingredients for making the working solution and choose containers where the concrete will be mixed. Select the forms with which the product will be made.

It is not so difficult to make decorative flowerpots for a summer residence with your own hands if you have imagination and a desire to create. Wonderful garden decorations performed in any shape - they can be made round or square, rectangular, abstract.

There are many materials available that are suitable for making castings. These are plastic bottles with different capacities, and children's rubber balls, and metal or plastic basins. A flower pot made of fabric and cement can be amazing in beauty - you can create a real masterpiece with your own hands.

The first flower beds made of fabric and cement with their own hands probably turned out by accident. After all, many people, after repair, simply throw the soaked cement mortar rags. But if you lightly conjure over the fabric and fix it with a solution, it will turn out to be unusual and very beautiful.

How to make a container for flowers

The simplest version of a concrete flower girl can be obtained as follows:

1 Pick up necessary materials... except concrete mortar, you will need old towels (terry or waffle towels) or a piece of any thick fabric of the right size. To begin with, you can take an unnecessary bucket as a form. You will also need a piece of plastic. Protect your hands with gloves when working with grout.
2 Dilute the cement with water to a consistency reminiscent of liquid sour cream. Turn the bucket on which you will dry the flowerpot upside down and wrap it with polyethylene, otherwise it will not be easy to remove it after the mixture has hardened. Immerse a towel in a container with the prepared solution. Then take it out and spread it. It should be saturated with the mixture completely, without residue, do not leave dry spots on it.
3 Put a towel on a bucket that has been turned upside down, then smooth the bottom better so that there are no folds, otherwise the future vase will turn out to be unstable. Straighten the fabric folds any way you like. Leave the resulting structure to dry for a couple of days. After the fabric has hardened, remove the bucket to the outside. Here is your flower girl and ready.

You can make a flowerpot for a garden with your own hands exactly as you intended it. The resulting product can be painted with bright colors or simply left as it turned out.

How to decorate your vase?

If you liked the very idea of \ u200b \ u200bmaking decorative flower girls and would certainly like to build such flowerpots for the garden, you can feel free to get to work. Handicrafts always attract a lot of attention, they can be proudly shown to friends and acquaintances. But sometimes you want something more unusual or bright. You can decorate homemade flower girls as you like.

For example, you may not like the rough outer surface of a homemade flowerpot. You can turn it into a glossy one after a little alteration. To do this, when making a mixture, choose cement and sand of fine fractions or add Rotband dry plaster to the mixture. Use silicate glue instead of water to dilute the mixture.

Polyethylene is used to form a glossy surface. The following additions will be needed to the main manufacturing method:

1 Prepare a large, sturdy piece of cardboard. Lay a greenhouse covering material on it and straighten it so that all the folds are smoothed out.
2 After saturating the fabric with the solution, spread it out on a cardboard and smooth it well so that the towel adheres better to the surface.
3 Then, the bucket selected to create the shape is placed in the center, after which the entire structure must be carefully and very quickly turned over, while holding it by the cardboard. In this case, the fabric should stick around the bucket along with the film.
4 Form the folds of the future product to your liking. You cannot make deep creases - it will be difficult for you to get the film out of them. From an already frozen structure, you can try to burn out pieces of film stuck there with a lighter.

The desired gloss has been achieved, but the product remains small defects... How can this be fixed? Take a brush and smear on the dried vase silicate glue without diluting it. So you can hide all the defects. You can additionally mix paint into the adhesive - this is how you get a pot the desired color and add it to the outer surface of the shine.

Option with print

In the process of making a flowerpot, you can perform decoupage. To make external decorative layer, you will need a thin printed cloth or loose patterned paper. For example, wallpaper, old newspapers are not bad. No need to use glossy magazines, posters, vinyl wallpapers.

When manufacturing, the sequence of actions is the same as when performing a glossy surface. You just need to add a layer with a picture. The step-by-step procedure is as follows:

1 Cardboard with foil is spread with silicate glue. Cloth, newspapers, wallpaper, selected for the drawing, are applied to it. Everything is smoothed out.
2 The reverse side of the paper material is coated with silicate glue. The glue should saturate the material well - this will take about 10 minutes. If there are dry areas, coat them additionally.
3 Place the cement-impregnated fabric over the pattern. Everything should be smoothed well, then the cardboard with the resulting "sandwich" should be tipped over onto the mold and left to harden. Straighten the folds.

If, after the mold has dried, there are protrusions that you do not need, they should be cut with a hacksaw. The resulting roughness can be sanded with a coarse emery mesh, which is easy to find in hardware stores.

How to prepare the solution?

To make the flowerpots beautiful, it is advisable to pay more attention to the preparation of the working solution.

This will provide it with the desired density and solidification rate.

To get a concrete solution for work, you need the following substances:

fine gravel;
sand;
cement;
water.

Portland cement, white cement works well. Gravel to choose fractions of 3-7 mm, sand will do open-pit fine-grained. Everything is mixed in a container in a ratio of 2 parts of sand, 1 parts each of cement and gravel. Water is added in small portions until the consistency of liquid sour cream is obtained.

To make the finished product lighter, small expanded clay is added to the batch. When using these ingredients, it is better to replace some of the gravel with it.

After pouring, the molds must be covered with foil or a damp cloth - hardening in this way is much slower. This will prevent the formation of cracks when the concrete dries. The structure should be disassembled no earlier than 3-4 days later. The surface of the resulting product is cleaned using a brush and sandpaper, irregularities are trimmed.

You can make your own material that is an imitation of tuff or sandstone. For this, a solution is prepared from 1 part of cement, 1 - sand, 2 - peat. Dilute the mixture with water until a mashed potato consistency is obtained. With the help of sculpting, the mass is given the desired shape... You can also use art-concrete for preparation - it allows you to make durable, elegant and lighter products.

How to paint a planter beautifully?

The most convenient way to decorate concrete pots is by staining. Suitable for this acrylic paints: they are the most resistant to weathering. Can be made concrete mix add coloring pigment to it.

The product is dried before painting and a primer is applied. To make a painted flowerpot look beautiful, it is better to choose colors that are not very bright, close to natural ones - the main point for focusing the gaze should be the plants inside the pots, whose task is to create a natural frame for them. You can arrange decorative painting in several colors on the surface, plant compositions, geometric patterns, abstract drawings.

How to prepare soil and plants for decorative flower girls

A layer of gravel, expanded clay, crushed stone is poured onto the bottom of a product made of concrete for drainage. A layer of nutrient soil is poured on top, which should include trace elements and mineral supplements. There should be a lot of organic matter in the soil for annual flowers. To provide organic fertilizers peat, compost or rotted manure are introduced into it.

Those summer residents who are seriously going to grow flowers in street pots should know that before the onset of winter time, it is necessary to prepare flower girls for the next season. In winter, in frosts, the soil completely freezes in the flowerpots. Therefore, in order to create flower arrangements in homemade pots, it is better to choose annual plants.

It is easy to paint the seedlings of annuals with your own hands. In order to achieve the desired effect, it is worth planting plants with bright colors and leaves with a decorative appearance in flower girls. It can be marigolds, annual dahlias, begonias, coleus, Snapdragon... A good visual impression is made by ampelous plants - these are nasturtiums, petunias, nasturtiums. In concrete vases, you can also thicken the planting in order to quickly achieve the desired effect. It should be understood that with such a small amount of land, it will dry out quickly, it needs regular watering.

You can place interchangeable compositions in flower girls. V spring time it is better to make them from multi-flowering bulbous plants - these can be daffodils, hyacinths, crocuses, tulips. For summer compositions, cineraria, lavatera, viola are suitable. In autumn, beautiful flowering is provided by asters, heliotropes, petunias.

Do you still associate the dacha with potatoes or tomatoes? But more and more of our compatriots are abandoning the vegetable garden and hard physical labor in favor of comfortable rest and beauty. suburban area... Typically, the beautification process backyard territory requires significant capital investment, but they have a real alternative. A flowerpot garden is affordable for every summer resident; it is able to revive even the most dull landscape. The secrets of landscape gardening will help you to choose the right flowers for flowerpots.

The advantages of growing flowers in flowerpots

Potted floriculture has ancient origins. Today, just like several millennia ago, people grow plants in pots or special containers.

The container garden can easily be placed even on a small personal plot, for this you do not need large areas... Green pets in flowerpots look perfect on paving slabs, cement pavement, in courtyards and on the porch of the house.

Flower pots can be placed at different levels using shelves, stands and steps. They can be easily moved from one place to another if desired.

Caring for plants does not require much physical effort. They are not afraid of the common bear, the larvae May beetle and other pests living in the earth. In the photo, flowers in flowerpots look not just a decorative background. They give charm and charm to everything that surrounds them.

Flowers will decorate every corner of your home

Due to the use of special substrates, you can plant any flowers in containers, even those that are not suitable for the soil of your summer cottage.

Flowerpots can be used to mask imperfections or unsightly objects. To do this, it is enough to put a luxurious flower in the right place.

Unlike stationary beds, there is always the possibility of replacing plants that have faded with others.

Such a garden has unique mobility. It is easy to transport it to another cottage, place it on the balconies or loggias of your own city apartment.

What flowers to plant

Ampel petunia, pelargonium and fuchsia are considered ideal flowers for outdoor flowerpots. The variety of shapes and colors of these plants allows you to create chic flower arrangements.

To ampel petunias pleasing to the eye for a long time, do not forget to remove dried flowers

It should be noted that petunias are quite capricious flowers that can only be grown experienced florists... Possession of agrotechnical techniques and strict adherence to the rules of care will allow you to maintain a delicious appearance of this ornamental plant.

The main advantage of pelargonium, popular in European countries, is its enviable endurance.

The best places for fuchsia, shady alleys are considered. This plant is not placed in open sunny areas.

Fuchsia is a great option for a hanging flowerpot on a shady terrace

The following plants are also suitable for growing in pots:

undersized marigolds;
daisies;
pansies;
coleus;
dwarf dahlias;
begonias;
lobelia;
Snapdragon dwarf varieties;
equal-leaved bell;
periwinkle;
chlorophytum.

In the spring, you can decorate your garden with blooming crocuses, daffodils or potted tulips.

Bulbous plants after flowering, it must be removed to a cool room

The containers are ideal for spicy herbs such as basil, lemon balm, rosemary and marjoram. The "highlight" of the garden can be figured trimmed flowerpot shrubs and trees.

The technology of planting flowers in flowerpots

In order for flowers in containers (street pots) to delight you with their beauty for a long time, it is necessary to take into account several simple rules.

If desired, you can create a mini rock garden in a flowerpot

Features of care and protection against pests

Once the flowers are planted, they need regular maintenance and watering.

It is important!
Container plants it is best to water with moderate amount of water. Remember to loosen the soil frequently to allow air to reach their roots.

Flowers in pots need additional feeding... For this are used mineral fertilizers as:

granules (characterized by slow action, it is enough to add 1 time per season);
solutions (feeding is done during watering, the recommended frequency is 1 time in 10 days).

It is necessary to remove dried inflorescences in time. This improves the appearance of plants and prolongs their flowering period.

Heat-loving species (fuchsia, pelargonium, coleus, etc.) for the winter must be transferred to a room with a temperature of at least + 5 ° C.

Perennials can be left to winter in the garden. Straw and jute fabric will help protect the flowerpots and their contents from frost.

Pelargonium in pots will decorate your garden with its flowering for at least 3 years

The main enemies of potted plants are the whitefly and spider mite... These pests can be dealt with chemicals... In addition to Lepidocide, Gaupsin and Bitoxibacillin, nettle or garlic extract is often used for spraying.

At proper care flowers in flowerpots grow beautiful and healthy. Let your work and imagination pay off with the beauty of a blooming garden!

It is easier to neatly organize the plants in the country than it might seem at first glance. It's really possible to make outdoor flowerpots for any flowers in just one weekend with your own hands. In this case, the necessary materials are probably already at hand. Simple to help you step by step instructions in the article below.

We make concrete flowerpots step by step

Concrete flowerpots are the most common outdoor option. They fit well into any landscape design direction.

It is easy and simple to make such flowerpots yourself, and the limitation in size and shape depends only on your imagination. Follow simple instructions below.

Necessary materials

plastic containers (of the same size and shape as you wish to see future flowerpots);
vegetable oil;
good concrete mix;
drill;
drill for concrete;
Master OK.

Getting Started

Plastic containers should be made of dense plastic and retain their shape while the concrete cures. Thin and wobbly walls of a fragile container can bend, and flowerpots will come out of a bizarre shape (although this may well be attributed to an individual design decision).

Advice! It is necessary to choose concrete from fine cement for your flowerpot... Concrete with the addition of large pieces of stone (gravel or crushed stone) is not suitable, since the final look may not be very aesthetic.

Grease the sides of the container very liberally vegetable oil, so that later it is easy to remove the frozen forms. Do not be afraid to overdo it: it will be much worse if you do not add oil and the concrete sticks to the walls.

Pouring mortar into molds

Pour the mixture into a container, and now place another smaller diameter in it. The smaller container should be oiled inside and out. You can put more solution in a small container, and another smaller one in the middle.

And so while there is enough space. Fill the last container with stones for weighting. How it looks, see the photo below.

Level the surface of future flowerpots well. Leave them to dry overnight. Then remove the concrete from the containers, shaking gently. If you are not too lazy to grease the containers with oil enough at the beginning, it will be easy to remove the forms.

How to drain the pot?

Leave the finished flowerpots to harden for another week so that the concrete sets and is ready for drilling. Use a concrete drill to drill holes from the bottom for drainage.

Plant plants to your liking in flowerpots and boldly decorate the summer cottage space.

Flowerpots made of fabric and cement for the street or yard

Other interesting solution country landscape design - curly flowerpots made of fabric and cement.

What materials do you need?

To make them yourself, prepare the following materials:

dry Portland cement (or other fine grinding);
voluminous cuts of cotton fabric;
a container that will serve as the basis for drying the composition (for example, an old bucket);
polyethylene;
thin wire.

The fabric base for a durable flowerpot should be:

dense and inextensible;
absorbent;
large enough to accommodate the desired plant and roots.

The color does not matter, since concrete pavement will not leave a trace of the original print. Therefore, feel free to use unnecessary faded towels, tablecloths or curtains on flowerpots for the garden. Synthetics will not work.

Step-by-step instructions for performing work

Prepare the frame: wrap a bucket or other container in plastic and secure with wire. Try on the fabric, and trim off excess pieces if necessary. If an even shape of the edge of the flowerpot is desired, round the corners of the fabric.

Photo selection:

Prepare the slurry according to the instructions on the package. Blot the fabric well with the solution and cover the bucket to create a beautiful vase. Straighten the creases according to your artistic taste.

Leave the product to dry for a few days. Then remove from the base, turn it over and let it dry for another day or two before making holes for drainage.

What to plant in flowerpots on the street?

After the man-made containers for plants are ready, it remains to decide which flowers to plant in flowerpots in the country so that they bloom all summer.

Try to plant something from the list below:

Perennial marsh hibiscus.
Petunia.
Zinnias.
Spherical gomphrene.
Feverweed.
Day-lily.
Iberis is evergreen.
Echinacea purpurea.

Do not forget to consult with a specialist in a store for summer residents, because each of these plants requires a separate approach. But all of them, of course, will delight you with flowering all summer season, and decorate the flowerpots that you made with your own hands.

Step-by-step video instructions

We also invite you to watch several videos on the topic of the article. From them you will get even more ideas on how to equip a summer cottage space with your own hands.

Decorative flowerpots will complete your garden design. They can be purchased at garden centers or made with your own hands. Consider ways to make a flowerpot with your own hands from various materials.

do-it-yourself flowerpots. Photo master class

Do-it-yourself stump pot

To make a street flowerpot from a stump with your own hands, you first need to choose a suitable tree. This can be a thick stem or a small driftwood. The decorativeness of the flowerpot depends on the shape of the tree and the texture of its surface.

They begin to make a flowerpot with their own hands with the definition sizes... The optimal height is forty centimeters. The excess is cut off with a chainsaw. In this case, an even cut is obtained and the bark, which decorates the surface of the future flowerpot, is not damaged.

do-it-yourself flowerpots for the garden. Photo

The resulting chumps nail down to the dried and processed bottom. For it, you can use a saw cut suitable in diameter. The parts of one circle are connected to each other with a construction stapler from the inside. The next row is placed so that the seams are constantly displaced. The rows are also connected with a stapler.

DIY outdoor flowerpots from a stump. Photo

We put a clay or plastic container of a suitable size inside the resulting flowerpot. We pour soil into it and plant flowers

Concrete garden pot. Master Class

From cement with the addition of other components, you can make both large flowerpots for flowers with your own hands, and relatively small ones.

To make a large flowerpot you will need plastic mold with parameters 53 cm in diameter and 23 cm in height.

do-it-yourself flowerpots made of cement. Photo

Since such a flowerpot will be quite heavy, it is better to do it right away in a permanent place.

To make a pot of cement with your own hands, we take a plastic pot, which is a form, and line it with a thin film. The cellophane must be straightened so that incomprehensible folds are not imprinted on the surface.

First, spread the solution to the bottom. The layer should be about four or five centimeters thick. Matches or toothpicks are great for controlling thickness.

To increase the strength of such a large product, you can install metal wire frame or other reinforcing structure. You can add about a handful of chopped fiberglass to it to strengthen the composition. Since the flowerpot is large enough, and it is difficult to knead large volumes of cement composition with your hands, you will have to do it fractionally. It will take about four or five batches.

Do not forget when making garden flowerpots with your own hands and about drain hole... It is made by placing a cork wrapped in a film on the bottom.

After eight days, check the readiness. To do this, tap on the surface of the cement. If the sound is not deaf, then the flowerpot is removed from the mold along with the film.

After brushing, the flowerpot is washed with water and slightly dried. Further, his words are wrapped in film so that the mixture continues to harden.

After about a week or two, the material will take on a lighter shade. This is a sign that it is time to remove the film, and put the flowerpot in its final place.

Small flowerpots made of cement

From such a cement mixture, you can make small flowerpots with your own hands. For them, take any form. These can be old fruit vases, flower pots and buckets, basins and dishes. Manufacturing technology is the same as for a large flowerpot.

Flowerpot on a leg with a curly surface

To make such a flowerpot with your own hands, use a mixture of the following components. Take one part of gray cement, one part of vermiculite and two parts of high-moor peat.

As a basis, take a wire fan frame and a five liter plastic bottle that is cut to the correct height.

Flowerpots from car tires. Step by step instructions

To decorate the personal plot, you can also use practically junk materials, for example, old car tires. To make flowerpots from tires with your own hands, you should choose the source material of the desired size. Winter studless rubber, which is softer and thinner, is best suited for carving.

do-it-yourself flowerpots from tires. Photo

Consider how to make a flowerpot out of tires with your own hands, similar to a flower. To do this, first draw a contour with chalk on the side of the tire.

When the petals are cut on the tire, small longitudinal cuts are made. They are located at a distance of five or ten centimeters from each other and facilitate the process of everting the tire.

It is not easy to turn the product out. This requires physical effort, but after even a small area is turned out, the process accelerates.

After that, it remains only to decorate the finished product. There are other options for making flowerpots from tires with your own hands.

DIY plastic barrel garden pot

The edges processed with a special tool so that there are no burrs.

Outside, two are attached to the bottom. bar to make the pot easier to move.

The resulting workpiece is sheathed wooden planks... They can be positioned end-to-end or overlapped.

The nails are driven in with a special pistol. From the inside, they are bent with a hammer.

Upper rim made from planks connected at an angle. Fasten it with nails and glue.

The wood trim can be varnished or painted in a suitable color. The pot is ready, you can plant flowers in it.

Vases made of silicate blocks with several tiers

This design option looks impressive and makes even the most familiar plants unusual.

The cavities inside the blocks are great for planting and growing plants. Some manufacturers have even started to produce special hollow elements for landscaping.

The blocks must contain drainage, so that excess water goes away. The base is chosen strong enough.

The base is glued to the bottom of the silicate blocks. Then the structure is assembled from the resulting elements. The blocks are connected to each other using glue.

Gradually building the tiers, it is necessary to fill the lower ones with earth.

Small flowerpots made of sticks

For work you will need thin sticks for example from ice cream. They are glued to wooden cubes.

By repeating the processes, three more sides are made.

Then sticks are glued on top on both sides.

The surface of the resulting container is sanded and painted.

It turns out a small flowerpot in which a container with flowers is placed.

DIY styrofoam pot

Polyfoam is a common material and people are often interested in how to make a flowerpot with their own hands from it.

First cut out rectangular blanks for walls that are glued together with self-tapping screws. Then the container is covered plaster mix in several layers reinforced with plastic mesh. When the mixture is dry, the surface is cleaned from irregularities. The next stage is painting. After that, a finishing layer of decorative plaster is applied. The product looks like it is cast from concrete.

A pot from a pallet. Master Class

You can make a garden pot with your own hands from wooden pallet. To do this, it is carefully disassembled into boards.

All boards with a length of 80cm are cut in half. Boards 120cm long, mark them into three 38cm pieces and cut them, making a beveled cut at an angle of thirty degrees.

We connect boards with oblique cuts using self-tapping screws. It turns out a hexagon. We attach a leg to each of its boards.

Similarly, we collect the second hexagon.

We collect the bottom of the flowerpot. To do this, we attach a transverse board between the legs. We put the bottom boards on it and fasten them to the edges of the hexagon with self-tapping screws.

It turns out a solid structure that should be treated with an antiseptic. You can decorate it in any way.