A hive with bees from plastic bottles. DIY plastic bottle bees Crafts from plastic bottles bee hive

Today, almost every home collects a variety of plastic bottles. Don't throw them away. This waste can be disposed of in a smart way. Even decorate the territory of the summer cottage or the area in front of the house with funny pigs, outlandish palm trees, lush flowers, whole flower beds. Such garden decorations and various crafts made from improvised materials with your own hands are very fashionable today. And how spectacular a bee created from a plastic bottle will look on some flower bed or fruit tree in your garden. Moreover, it is easy to make it: a small one - from bottles of baby juices or mustard, a large one - from a liter plastic bottle, or a larger volume. And what wonderful bees can be obtained from a kinder surprise, especially the plastic box where the toy is hidden, usually yellow.

Video: DIY funny bees from plastic bottles

How does a bottle bee appear?

First of all, you should make sure that all the necessary materials at hand are available:

• plastic bottles;
• yellow and black acrylic paints;
• glue;
• black electrical tape;
• stationery knife;
• small buttons;
• brushes;
• wire;
• scissors.

To make a "real" bee from a plastic bottle, the instructions must be followed exactly:

1. The first thing you will do is simulate the striped belly of a bee. If you have a yellow or black bottle, you will save time. Because in this case, you just need to finish the missing stripes. It is enough to wrap a yellow bottle with electrical tape. Transparent - you will first have to paint it yellow, and after the paint is completely dry, apply strips of electrical tape. Or do without tape, and use only paints.

1. Four wings are cut out of a transparent plastic bottle (it is better to draw them first). On the top of your bee's body, you will need to make cuts to secure the wings. And so that they do not fly off, glue them a little. Wings in the sun will shine brighter with glitter nail polish.
2. You can use a larger cover as a muzzle. Make the eyes from two small caps, and on them depict the pupils either from dark plastic or black paint. The role of the proboscis will be performed by a piece of black wire. Antennae and paws can also be made from it, for which the plastic is pierced with an awl, and bend them using pliers.

Thus, you will make as many bees as you want - a whole hive.

If bees are to fly over a flower bed, they should be fixed on a long stick-holder, which must be inserted into a hole made specially for this purpose in the bee's abdomen.

If they "live" on tree branches from the garden, you will have to make a special mount. The transparent line must be inserted first into the lower and then the upper hole in the middle of the bottle, then strung onto the branch.

You can make another craft, a beehive from a large bottle. Cut a square hole in it and paint it in three layers of yellow paint, no less.

Are you convinced that the most ordinary plastic bottles are quite suitable for crafts, and you can create a whole swarm of bees with your own hands?

How else to create a bee with your own hands?

What could be more pleasant for a child than doing something with his parents with his own hands. Such crafts often become the most beloved toys. As a material, you can use the simplest things that can be found in your home:

• Paper

Paper plastic for your child will be not only enjoyable, but also develop his imagination and fine motor skills.

Among the sheets of colored paper, select yellow, black and white, stock up on scissors, glue and thick thread, and do not forget about a ruler with a pencil. And start (step by step instructions):

1. Cut off a strip of 3x21 cm from the yellow and black sheets.
2. Fold them at a 90º angle to each other, black at the top and yellow at the bottom.
3. Glue the ends of the strips carefully.
4. Yellow - put on top of black, again at a right angle, and iron the fold.
5. Continue to alternate the bends of the stripes.
6. Glue the tips.
7. Iron the folds well again and stretch the paper accordion slightly.
8. Turn the workpiece upside down with the yellow side, and bend the last square diagonally and make an incision 5-7 mm long.
9. Straighten the yellow square and bend the sting of the future bee. If you did everything right, the stinger is yellow on top and black on the bottom.
10. Cut out paired wings (oval or round) from yellow paper and fasten on the back of the bee.
11. Draw black pupils on circles cut out of white paper, and glue the finished eyes to the bee's face.
12. Fasten the thread on the back.

It turned out to be an excellent craft - a bee. Your little one can send a DIY toy flying.

Video: Crafts for the garden Bee from plastic bottles

More options

Or you can try to make another bee. A 12x9 cm thick yellow paper cylinder will become the belly. You will help the baby to glue it together.

Stick the strips 1x13 cm of black paper onto the cylinder, leaving small equal gaps between them.

Cut out double wings from blue paper. It is better if the workpiece is solid. This makes it easier to stick it to the back.

The role of the head will be played by a circle of yellow cardboard 3 cm in diameter. Glue thin tendrils of black paper on it, eyes made of white circles (5 mm in diameter) with drawn pupils. Cut a perky bang and a long sharp sting out of black cardboard and glue it on the bee's face.

It remains to glue the head to the body. The bee will turn out to be perky, ready for adventure.

• Kinder Surprise Container

This delicacy is familiar to every child. It is rare that a parent does not buy this chocolate egg for his baby. Although there is nothing more interesting than a surprise hidden in a yellow container inside an egg. And what gorgeous crafts you can make from these yellow kinder boxes!

For example, here is the easiest way to make a bee from a kinder surprise container for your child with your own hands:

1. Wrap it with thick black thread several times.
2. Draw a muzzle with a marker. The little artist will be happy to do it with his own hand.
3. With an awl, pierce the back of the bee and pull the thread through the hole.

There are many more different ways to create kinder surprise bees, and not only them.

You will have fun and usefully spend an hour or two with your baby, creating fancy toys with your own hands. Dig around at home among unnecessary little things. You will probably find something you can create from in the same way as from plastic bottles and boxes from Kinder Surprise.

Among the elements of modern landscape design, a special place is given to the use of a variety of decorative beehives, which can be made by hand or purchased ready-made.

Artificial dwellings for bee colonies have coexisted with humans for many centuries and rarely surprise anyone. The emergence of funny and bizarre forms of beehives as an element of decor is only gaining momentum on the territory of Russian household plots.

The main purpose of these unique decorative structures is not to accommodate honeybee families, but to decorate the surrounding landscape space. The summer residents who install them are far from knowledge of beekeeping, and their main goal is not to care for bees and the stable receipt of beekeeping products.

Most types of decorative hives fit very harmoniously into the landscape and design features of the country garden and are able to give it an individual and pastoral look. Depending on the gardener's imagination and budget, this type of beehive can be made from various materials and using a variety of design solutions.

Hive options

Based on the main goals, hives can be colonized by bees or be an ordinary garden environment. It is possible to use both a ready-made decorative bee house and a homemade version.

Depending on the material used in the construction, the history of beekeeping, two types of hives are known:

• based on natural materials (clay, straw, cork and others);
• based on synthetic materials (most often polyurethane hives).

Polyurethane hives appeared in Russia relatively recently, but a number of advantages made them quite popular and well-known.

Polyurethane hive

The main advantages of this type of decorative beehive are:

• a variety of shapes and a wide choice of colors;
• fully collapsible design;
• resistance to temperature extremes;
• design features allow, if necessary, to easily change the size of the decorative bee house;
• can be easily transported and carried to a new place;
• ecological purity of the source material;

• interchangeability of almost all parts;
• durability and resistance to damage and adverse external influences.

These ready-made bee hives are easy to assemble and disassemble. The self-respecting manufacturers attach the drawings of the hives and the assembly diagram to the finished product.

Maintenance of such decorative structures is minimal and consists in periodically cleaning the internal surfaces. It is allowed to wash the hive with a warm soda solution. Subsequent disinfection is carried out only with approved preparations.

When choosing a polyurethane decorative beehive, you need to make sure the quality of the source material and check for a certificate. Such a beehive is quite a budget option and assumes a variety of shapes and sizes.

In addition to ready-made hive options, most gardeners have an excellent opportunity to make a do-it-yourself hive. Most often, improvised materials are used for homemade bee houses. For such a creative process, you can use completely different components or use special editions that contain a variety of drawings of the hives.

How to make a beehive out of wood

Any decorative type of hive should not only be suitable for a bee colony, but also be a harmonious component of the surrounding landscape. For this purpose, you can use a wooden block from which the core is extracted with a hammer and chisel. Then an entrance is made, which will allow the bees to freely fly into and out of the hive. A landing board is attached under the taphole.

Different designs for hives allow for a variety of materials to be used as the top cover. A round wooden beehive with a high thatched roof looks most impressive. Using wood to make a beehive is highly justified. If such a hive is covered with a special varnish for the greatest decorative effect, then it will look very organic against the background of any garden plantings.

How to make a beehive from improvised means

Quite often, plastic five-liter bottles are used for decorative purposes, which can be found in almost every household. Decorative bee houses made of this material look very original and fun. In addition, such hives are not populated with live bees, which is very reasonable if there are small children or people in the house who suffer from allergic reactions to bee stings.

In addition to empty five-liter bottles, you will need the following material to make such adorable decorative houses:

• various small plastic bottles for making bees;
• a can of yellow paint or a can of yellow acrylic paint + a brush;
• electrical insulating tape in black;
• four wet brushes;
• glue for plastic;
• decorative eyes and beads;

• a small skein of twine;
• synthetic white or colorless thread.

For a more stable color and protection from UV rays, small bottles should be painted yellow with several coats of paint. It is advisable to apply at least three coats of paint from a spray can. After the paint has completely dried, strips are made with black electrical insulating tape. Eyes and noses of future decorative bees are attached to the blanks with the help of glue. The wings are cut from clear plastic bottles and attached to the bees with synthetic thread.

It is marked on a five-liter bottle, and then a square hole is cut out. The future hive is multi-layered with yellow paint. Four bast brushes are fastened with twine, which are fixed on the bottle lid as a roof.

The improvised decorative bee house is ready, and all that remains is to place it on the branches of a tree. Bees complement the composition, which must be placed around the decorative hive.

Beehive (video)

Any garden decorations and decorative elements have become very demanded, and prices for them are unreasonably high and inaccessible to most summer residents. Homemade decorative bee houses are a very budget option for landscaping. They will give the garden originality and will delight not only the owners, but also the guests for many years.

For the originality and uniqueness of the whole composition, you can also make plastic decorative bees for the hive. To do this, you need capsules from Kinder Surprise or from rubber gloves. Naturally, you will need:

• threads of two colors;
• contour "bronze" and "gold";
• stencil for the wings;
• marker, crochet hook;
• scissors, awl, pencil, screwdriver.

The prepared capsules must be crocheted, while the color of the threads alternates. Gently remove the ends. Cut out the wings from a plastic bottle using a stencil. Do not forget to draw the veins with an outline, this will give more realism.

The next stage in making bees for the hive is making a hole with an awl in the blanks and fastening the wings with bolts, which can be positioned both up and down.

At the back we make a small tail-sting. The nose will help to make a bead, and the eyes - buttons. If the contour is perfectly traced on the wings, then they shine very beautifully in the sun. With an awl, you also need to make a hole in the bee's abdomen and insert an unnecessary knitting needle there. That's all, now attach the bees to your hive. The work is done, it remains to choose the most ideal place for such a decorative and very attractive thing in your garden!

The original decor always brings zest to the interior, fills it with character and meaning. Unusual and beautiful things do not have to be bought (their price is usually high), but you can do it yourself.

A nice bee hive will be an excellent decoration for your kitchen or summer cottage. He will fill the room with home comfort. Making a craft does not require special skills and expensive materials. Most of the materials can be found from many housewives, and the rest will not be difficult to acquire.

For manufacturing you need:

Balloon;
a roll of twine;
PVA glue;
hot glue;
decorative bees, flowers and more.

Inflate the balloon to the desired size. Mark the place of the entrance to the hive with a marker. We coat the ball with PVA glue.

Loop by loop, carefully wind the twine. At the edges of the window (the entrance to the hive), cut the thread and make the next row. When the whole ball is wrapped around, we decorate the entrance to the hive and leave it to dry completely.

If all the threads are dry, pierce the ball and remove it.

Using hot glue, we fix bees, flowers and other decor to the product. Fasten a wire ring on top and wrap it with twine. Now the evidence can be hung.

Inside evidence can be left blank or decorated. For example, place a synthetic winterizer inside and cover with a yellow rag. Remember to fix the fabric with hot glue. Another option is to put bees or flowers inside.

For decoration, you can use a honeycomb cut from a piece of black leather. Coffee beans look good against the twine. Which decor you choose depends entirely on your imagination.

Bee evidence can serve not only as a home decoration, but also as an excellent craft for school and kindergarten. Its production does not take much time and effort, and the result is sure to turn out to be very effective and attractive. Children can also take an active part in manufacturing, because all stages are quite simple and understandable even for a child.

You will find a lot of interesting and original home decor, extraordinary and useful things on the website.

Making crafts from plastic bottles with your own hands has become popular relatively recently, but already everywhere in the yards, on the playgrounds in kindergartens, you can see colorful and unique figures made of this material.

Craftsmen create stunningly colored and skillfully designed compositions. A plastic bottle, previously thrown into a landfill, comes to life in the hands of a master. Bottles are used to make flowers, animal figurines, and even toy cars and trains. We are going to make a hive and little bees.

Assembly video

Beehive for landscaping

We will need the following materials to make this composition with our own hands:

• plastic 5 liter container;
• acrylic paints: black and yellow;
• scissors;
• bast.

Rinse the bottle well, soak the glue and label. If there is a ring to wear, cut it off. Degrease the work surface with detergent. This is necessary so that the paint lays down evenly and does not roll off the walls of the bottle. Do not forget that our structure will stand outside and be exposed to rain and sun.

In the middle of the bottle, cut out a rectangular or round door, as your imagination decides. Paint the future hive with yellow acrylic paint. It should be painted twice, so there will be no gaps and the paint will lay down more evenly. Paint stripes on the hive with black paint, mark the windows and the door.

Next, you need to make the roof of the hive. It also needs to be done with your own hands from a bast. We need a piece of bast 30 cm long. Tousle it well, grease the neck of the bottle with glue and glue the "skirt". If there is no washcloth, it can be replaced with available materials: straw, twine. In this case, glue the pieces of twine in several layers.

The roof can be treated with furniture varnish. Such a roof will withstand any bad weather. The finished hive should be screwed to the tree with self-tapping screws.

Bee decor

Now try to make with your own hands not only a hive from a plastic bottle, but also woolen bees. To make the bees we need two or three capsules from the Kinder Surprise chocolate egg and a skein of thread. The materials must be used the same as in the first method with the addition of:

• whitewash brushes;
• a skein of yellow woolen yarn;
• a small plastic mineral water bottle;
• marker black.

It is good to degrease the capsules with a detergent. Make slits in the surface of the capsules. Cover the entire surface with glue. Carefully wind the woolen thread over the entire surface of the capsule. From a small plastic bottle, cut two wings for our bee.

Paint the wings with black acrylic paint. Let it dry and fix it in the slot on the back of our bee.

Use a black marker to draw stripes and eyes on the bees. It is desirable to cover the top with furniture varnish. Put the bees on knitting needles (knitting needles from the umbrella frame are allowed) and stick them into the roof of the hive. You can also make flowers around the hive from plastic bottles with your own hands or attach a loop from twine to the roof.

You can create beautiful crafts with your own hands. Artificial bees will decorate the backyard and look harmonious among the abundance of greenery in the country!