Installing a steel bath: tips and tricks. How to fix the bathtub so that it does not rock: the recommendations of the masters Special brackets for attaching the bathtub to the wall

1 Cast iron, steel and acrylic - what's the difference
2 Fixing bathtubs and communications to them
3 Wall mounting options
4 Large gap from the wall - what to do
5 Videos

One of the most important elements in the bathrooms there is a bath, and this is despite the fact that relatively inexpensive showers are considered more popular today. Many people are interested in how to fix the bathtub to the wall in such a way that water does not flow along the wall under the bathtub, and the bathtub itself does not stagger. For this purpose, special fasteners are used, they can differ markedly, given the difference in types of baths.

Cast iron, steel and acrylic - what's the difference

Cast iron baths. During installation, you will feel that these bathtubs weigh a lot, so they must be installed on a solid and stable base.

Steel baths are fixed on a podium, the walls of which are made of bricks. A bathtub installed inside the podium will never sway and will become very solid on its base. However, if you fix the bath in this way, then noise during its filling with water cannot be avoided.

You can reduce the sound during the filling of the bath by treating its outer part with mounting foam or putty. Then the sound of water will not be heard, in addition, the heat will remain in the bath longer.

Those who install an acrylic bathtub know that it retains heat much better than its cast iron counterparts, plus its non-slip surface. Acrylic bathtubs are also known for their pleasant appearance, although, however, the degree of its strength is not so high. Considering that an acrylic bathtub has a flexible bottom, it should be made for such a bathtub metal carcass, otherwise the bottom of the tub will sag under the weight of the person. It is also necessary to use special legs, which are part of the frame for bathtubs made of acrylic and steel.

Fixing bathtubs and communications to them

Regardless of which bath will be installed, you need to learn a few basic principles that will help you install the bath correctly:

Drain pipes are more convenient to fix when the bath is on its side. Turn it on its side carefully, otherwise there is a risk of damaging the coating of the bath. After that, an overflow is mounted to it and drain pipe.
The next step is to connect the siphon with pipes (usually plastic and flexible).
Legs are attached to the bath in its supine position, and it is installed on them so that it is easy to connect the siphon pipes to the sewer.
The bathtub is placed on its legs only after the installation of the drain.
Once in place, the bathtub is leveled horizontally using a spirit level (to do this, adjust the height of the legs).
After finishing the installation drain system it needs to be checked for leaks. To do this, put water into the bath, and then check if it has leaked onto the floor. If there is a leak, the shortcomings must be eliminated - seal the seams with silicone or simply fit the pipes more tightly at the joints.
Then, if necessary, a drywall frame or a special podium made of foam blocks is arranged, which will hide the bottom of the bath.

How to install bathtubs from different materials? Now let's analyze this in detail.

Cast iron bathtubs are often installed on four legs. These legs are connected to the body with the included wedges, or the tub legs can be bolted on. If a cast iron bath needs to be installed on an insufficiently strong loose surface, then metal plates should be used, which are placed under the legs and allow you to properly distribute the weight of the bath over the surface of the base.

The diameter of such a lining must be at least 5 cm, and the thickness must be 5 mm or more.

Steel tubs don't weigh as much as cast iron tubs, so it's a little more difficult to stabilize them. It is better to install them on bricks to increase the area of \u200b\u200bsupport. The acrylic bathtub is attached exclusively to the wall, otherwise a slight backlash or wobble cannot be avoided. In addition to the fact that a frame is being assembled, with the help of which the whole structure will be somewhat strengthened. In the video below you can see how the acrylic bathtub frame is mounted in the bathroom:

Wall mounting options

There are several ways to secure a bathtub to a wall.

Insert into a niche. If the installation of the bathtub is carried out in a bathroom where there is not even a rough finish yet, then a niche can be omitted if, given the size, this is not necessary. The bath is simply installed, the walls are plastered, they are finished and the joint is treated with sealant so that it does not run along the wall. If you are going to install a bath in this way in a bathroom where there is already rough finish walls, you need to purchase a bath of the appropriate size and prepare a niche in the wall for it. The diagram shows how to properly install the bath in this way.

In principle, the first method is also possible, but it is not as reliable as installation if the tile is already lying. In this case, the bathtub is attached to the wall only due to the sealant and decorative plinth.

Installation on a metal corner. Cast iron and steel bathtubs can be installed on a metal corner, it is attached along all walls, and the sides of the bathtub are installed on it. Further, if desired, a plinth is installed, the joints are treated with sanitary sealant. Why can't you attach an acrylic bathtub to the corner? Because the side can be deformed, since with inside it is not supported by anything, as a result, the sealant will move away from the wall, and water will seep onto the floor.

Mounting on hooks or brackets. it best way mounts acrylic bathtubs. To install an acrylic bathtub on hooks or brackets, you need to install the bathtub in place, leveling it. Stepping back 20 cm from its corners, make marks. Then the bath is moved aside, the thickness of its sides is measured, this distance is measured down from the marks on the wall and holes are made for one or two dowels. Install fasteners. Then the bath is simply mounted on hooks or brackets with sides. Everything - the bath is rigidly fixed. A plastic or ceramic plinth is glued on top of the seam, the joint is treated with a sealant.

Large gap from the wall - what to do

It often happens that after the bath is already installed, a decent distance remains between it and the wall. Since the bath in this case does not touch three walls, it will stagger. In order to fix it rigidly, it is necessary to create a frame that can be used simultaneously as a shelf for shampoos and various jars.

What will be needed? First of all, a frame is assembled using metal profiles. Then it is sheathed with drywall. For this purpose, a special moisture-resistant drywall is used. Be sure to make a niche with a door so that you can get to the plumbing system.

Alternatively, instead of a frame, you can attach a bar to the wall so that its top is slightly higher than the level of the bath. A shelf is made on the bar, which will lie on the bath. At the same time, it should have a slight slope towards the bath so that water does not accumulate.

This video shows how to use the special fixings for mounting acrylic bathtubs:

Installing a bathtub is a pretty hard job in the truest sense of the word. Especially it concerns cast iron sanitary ware, which to install alone is an almost impossible task.

For installation, even relatively light acrylic bathtubs, it is better to find an assistant, as any awkward manipulation can damage the body, cover or drain parts.

What to consider before starting work

Before you start installing the bath yourself, critically evaluate your own capabilities - do you have enough skills to mount plumbing fixtures almost by touch. Although we note that even very modest skills acquired, for example, when installing kitchen sink, should be enough for a successful installation of the bath.

When purchasing plumbing made of acrylic, be prepared for the fact that the work will have to be done with the utmost care - if carelessly handled, the bath can warp, causing the coating to crack. It will also be damaged if the working tool accidentally falls into the bowl. In addition, during installation, blind holes will have to be drilled in the body of the acrylic bath, and given that this material is extremely easy to drill, it is quite possible to overdo it and make a hole through the bath.

What you need to know about cast iron bathtubs

Before purchasing cast iron bath, it is necessary to familiarize yourself with its features as carefully as possible:

It is better to lean such a bath on three walls at once, especially if it is installed on open decorative legs, since the latter can easily break from the lateral force applied to the bath.
It is advisable to attach the siphon to the drain hole in advance, while again, a heavy bath will have to be turned over once again, which can lead to various damages.
Cast iron bathtubs are quite expensive to buy, but their operation is also expensive.

When installing cast iron, take care not to damage the tiles on the floor.
To do this, usually put bricks under the legs.

Cast iron warms up for quite a long time - in order to fill the bathtub with warm forty-degree water, a boiler that heats water up to 60 degrees will need about 100 liters of water. For comparison, the same acrylic bath will require only 50 liters of water heated in a boiler to 60 degrees. It should also be taken into account that cast iron gives off the received heat much faster, therefore, in terms of efficiency cast iron bath inferior to acrylic more than twice.

Features of acrylic bathtubs

Unlike cast iron, acrylic bathtubs are quite light, which makes it possible to install them alone. In the production of acrylic sanitary ware, enterprises do not experience any technological difficulties associated with giving products any complex shape, so on sale you can find a variety of samples, but at the same time quite inexpensive.

The thermal conductivity of this material is quite low so that the bath does not cool down for a long time, while it heats up almost instantly. This is associated with significant savings in the operation of acrylic plumbing, as already mentioned above.

Attach the assembled frame to the acrylic bathtub in the bathroom,
otherwise, it may not pass through a standard 60 cm doorway.

The main disadvantage of acrylic bathtubs is their relatively low strength and not as long service life as cast iron ones. However, with careful operation, it can reach 15 or even 20 years. Overview - read the next article.

The method of installing acrylic bathtubs also differs from cast iron ones, which is due to the characteristics of the material.

Installation of cast iron bathtubs

A cast iron bath, as previously noted, is extremely heavy, and it is with this circumstance that some features of its installation are associated:

Installation of acrylic bathtubs

First of all, when installing an acrylic bath, it will be necessary to attach guides for legs to its bottom, which are attached to the bottom with self-tapping screws.

All marking is carried out in accordance with the instructions, while the lodgements are installed strictly perpendicular to the longitudinal axis of the bath.

The attachment points of the legs usually have an increased thickness of acrylic.
If not, glue wooden blocks and screw on them.

Drilling blind holes for self-tapping screws is necessary with a drill with a stopper about 3/4 of their length. After that, the legs themselves are installed, drain fittings are mounted.

An extension of the bypass pipe should be provided.

The side of the bathtub sits on plastic hooks that are attached to the wall with dowels.

The bath is installed in the right place and leveled in height with the help of adjusting screws.

Note. It is not necessary to adjust the slope of the bathtub for draining, it is structurally incorporated at the ebb of the bathtub bowl.

All cracks are sealed with silicone, the influx of which can be removed with a rag soaked in acetic solution.

There is also an option for restoring a bath - this is, read all the subtleties of this method in a separate article.

When installing important role plays the height to which you can raise the bath above the level of the sewer inlet. It should be raised higher for two reasons:

The drain from the bath will become more intense. In this case, it is not so much the speed of water removal that is important, but the fact that a powerful drain will almost completely eliminate the formation of hairballs on the drain grid and in the siphon.
The high location of the bath will make it possible to install a siphon with a deep elbow and, accordingly, a good water seal, which will significantly reduce the likelihood of unpleasant odors and harmful gases backwards from the sewer.

Deep knee protection unpleasant odors sewers

The choice of material is also important. In most cases, it is made of polyvinyl chloride (PVC) and polypropylene. Latest material more expensive, but at the same time it is stronger, more durable, its walls are smoother, which minimizes the possibility of blockages.

Regarding the choice of drain, a few words should also be said. So, too cheap models of siphons, the metal mesh of which is attached to a bolt, can in fact be considered non-separable, and therefore non-repairable. The fact is that after a few months the rust seizes the bolt so much that it is not possible to unscrew it without breaking the siphon. At the same time, it does not even matter what metal the hardware is made of - steel or, for example, bronze or brass. Just in the first case, we will observe the usual chemical corrosion, and in the rest - electrochemical.

In conclusion, we note that for overflow in the bathroom, you should not take a rigid pipe at all. A flexible corrugated hose is quite suitable for this, which, on the one hand, is extremely easy to install, and on the other hand, due to its larger internal diameter, provides better water permeability, which reduces the likelihood that water from the bathroom will overflow.

Installing a bathtub is a responsible matter, because this item of plumbing has a very large load. An improperly installed and poorly secured bathtub can leak, and in the worst cases, tip over and injure the owners. Therefore, before installing, read our article, from which you will learn about the methods of fixing the bath and correct order production of works.

Material Features

Regardless of the type, there are basic principles for installing a bath:

Installation of various bathtubs

As we mentioned earlier, type of fastening depends on the chosen bathtub.

In general, the following steps can be distinguished on how to install a bath against a wall:

the bath is laid on its side, and a drain pipe is mounted to it;
the floor siphon is connected to pipes, most often, these are flexible plastic pipes;
legs are attached to the bathroom, and it is installed so that it is possible to connect the siphon pipes to the sewer;
check the tightness of the connected sewerage;
if necessary, they construct a drywall frame, a foam block podium and install spacers.

How to fix a large gap in the wall

Usually after installing the bath, it may remain long distance between end and wall. This will not allow you to securely fix the bath on three sides, and it will shake. In this case, you can turn the disadvantage into an advantage, and create a framework. As a result, you will get a shelf between the bathroom and the wall, on which you can put shampoos, powder and other accessories.

There are several ways to close big gap:

Create a frame from profiles, then sheathe it moisture resistant drywall. Do not forget to make a hatch for access to plumbing.
Fasten the bar to the wall, and make a shelf. One side of it will be held on a bar, the other on a bathtub or frame.
If you don't have a puncher, you can use another solution - cut a strip of extruded polystyrene or foam and insert it tightly into the slot. This is necessary so that the solution does not fall when embedding. From above, make a layer of gypsum and cover all the cracks. You can also use mounting foam for this. Thus, in just 15 minutes you will close up a large gap, get rid of the rumble and tapping on the walls. If you already have tile installed, cover it with masking tape so as not to stain the surface.

When creating a shelf near the bath, make it with a slope so that the water does not accumulate there, but flows down. In addition, it is important to mount the bath itself with an inclination towards the drain so that the water does not stagnate.

Podium installation

An elevated platform is created to install the bath on a podium made of bricks or foam blocks. The bath is placed on the podium, while the legs remain on the floor. Before laying the podium, the walls and the bottom are abundantly coated with mounting foam.

Instead of a brick podium, you can fill plastic bottles water, close them tightly, and lay them on the floor. They will serve as a space filler when you want to create a "thick pillow". Treat them liberally with mounting foam and lay the "belly" of the bath on them. This method is much cheaper and faster than a brick podium.

Homemade podium from polyurethane foam and bottles.

Another option is to create a wall that will support the board and hide internal communications. This method is especially suitable if you have glued legs, as they will not be able to reliably support the weight of water and your body.

Tiles are laid on top of the wall, or choose another finish.

If you have any questions, watch the video instruction on installing and fixing the bathtub on the podium:

After installing and fixing the bath, be sure to check the reliability of the seal so as not to accidentally flood the neighbors.

Old-style cast iron baths are quite difficult to budge. But modern steel and acrylic models, due to their low weight, are rather unstable. If installed incorrectly, they will wobble with use or move with the slightest push, spoiling the finish of walls and floors. Let's talk about how to fix the bath - steel or acrylic - to avoid such troubles.

The stability of the bath depends not only on the procedure for its installation, but also on the dimensions of the bowl of this plumbing. In order for the bath to stand securely, its dimensions must correspond to the distance between the walls at the installation site, minus 2.5–3 centimeters on each side. Under such conditions, the bowl will be easier to fix to the walls and floor. In addition, in this case there will be no gap between the bathtub and the walls, into which water will inevitably enter during use.

Features of the device of steel baths

Among all types of bathtubs, steel models are the most difficult to install motionless. This is due to two features of their design:

low weight of the bowl;
lack of mounts for legs.

on cast iron and acrylic models With outer side the bowls usually have special fasteners to which the legs can be securely screwed. Manufacturers of steel baths have abandoned these details. Because steel is pretty soft material, there is a high risk that when using the bath, under the weight of the water collected in it, plus the body immersed in it, it can bend. In this case, the fasteners will inevitably damage the enamel coating of the bowl.

Legs for steel plumbing are usually a kind of goats or props. The tub is supposed to just rest on them. Some models of legs can be supplemented with an adhesive layer for a more secure fixation with the bottom of the bowl. But that doesn't improve the situation much. Therefore, it is recommended to use more reliable structural elements in addition to the legs.

How to fix a steel bath so that it does not swing

There are several ways to install a steel bath in a stable position. Most often, it is recommended to make a brick stand under the plumbing bowl. But this option is not suitable for everyone. First, executing brickwork requires certain skills and abilities. Not every homeowner will be able to build a reliable stand with their own hands. And in this case, rather high requirements are imposed on the quality of the masonry, since moisture and serious weight will constantly affect it.

Secondly, in many houses, especially those belonging to the old fund, interfloor ceilings they just can't bear the weight brick substrate. As a result, installing a bathtub can turn into a utility accident for you and the neighbors downstairs. Plus, not everyone wants to wait a few days until masonry mortar dry and acquire the strength necessary for the installation of plumbing. Therefore, it is better to use more simple options fixing the bath.

Tip: if you still want to install steel bath on a stand, do it not from a brick, but from a gas block. This material weighs much less, and it is more convenient to mount it.

To the simplest and most reliable installation methods steel bath relate:

fastening to walls on metal corners;
installation on a frame made of a metal profile;
use of special fasteners.

Where does the installation of the bath begin

Whatever installation method you choose, remember the main thing - the installation of the bath begins with a fitting. First, the bowl is placed in the right place on the legs, its position is leveled and connected to the water supply and sewerage. After that, you should check the performance of the product and especially the quality of the water drain. As you know, the bath should be at a slight angle: only in this case the drain will work correctly.

Having found out the optimal angle of inclination of the bowl by adjusting its height, mark the position of the sides on the wall. According to these marks, in the future you will install fasteners for the bath: steel or acrylic. Turn off after marking. plumbing device from communications and take out of the room.

Important! The final installation of a steel bath, regardless of the methods of its fastening, should be carried out after the floor of the room is completely finished with tiles or other material.

Mounting the steel bowl on the corners

Enough reliable option fixing the bathtub - in addition to the legs, lean it with its sides on wide metal corners screwed to the walls. This the way is fine you if the walls of the room are made of sufficiently strong material and are leveled with plaster or tile adhesive. To drywall constructions it is better not to fix the bath: they will not withstand such a weight.

Important! Installation of corners should be done after the finishing of the walls of the room is completed.

You can hang the corners only on two walls, against which the short edges of the bowl will then abut, or on all three vertical surfaces with which it will come into contact. In order not to damage the finish, first use a special drill to make holes for fasteners in the tile. After that, you can drill through them directly into the wall, using, depending on its material, a drill with a victorious solder or a puncher.

The place of attachment of the corners should be determined by pre-made marks. At the same time, keep in mind that the bath will rest on them with sides, but part of its weight should also fall on the legs. Don't forget to adjust for the thickness of the corner.

Installing the bathtub on the frame

If you plan to close the space under the bowl, The best way how to strengthen a steel bath so that it does not stagger is to put it on a metal frame. The structure is made from wall profile UD and CD. The first is fixed to the floor with dowels as a base for the frame. From the second, the upper frame and supports for it are assembled. You can also make a welded support structure from:

metal corner;
steel pipes of suitable diameter.

Important! The size of the frame is selected in such a way that the profile of the upper frame fits snugly against the walls of the bowl, while the bath itself stands firmly on its legs.

Corner posts from the profile are fastened to the upper and lower frame, and also, for greater reliability, are attached to the walls of the room. The erection of the frame should be carried out after finishing the walls, or at least after tiling the part that will be located above the bowl. Upon completion of installation, the frame can be sheathed plastic panels or drywall, which is then tiled.

Important! When sheathing, do not forget to leave an inspection hatch for access to communications located under the bathroom.

Using special fasteners

If the bath bowl rests firmly enough on the legs, you can restrict yourself to fixing it to the wall using special fasteners. They are sold in a wide variety in construction and plumbing supermarkets. This operation should be carried out before finishing walls. In the future, the fasteners are hidden under, which contributes not only to improving the aesthetics of the room, but also to increasing the reliability of fastening.

Acrylic bathtubs today are gradually replacing other varieties of similar plumbing. They are made from lightweight practical material. At the same time, the cost of acrylic bathtubs remains acceptable to buyers. For them to last a long time, you need to properly mount the bowl. This procedure can be performed independently. How to mount an acrylic bathtub to the wall will be discussed later.

Acrylic Features

Installation of an acrylic bathtub is quite possible to do it yourself. This is due to the characteristics of this material. It is lightweight and practical. Therefore, products from it are much easier to install in the bathroom than, for example, cast iron or steel bowls.

The advantage of acrylic bathtubs is the variety of their shapes and sizes. If desired, you can purchase a straight, angular, figured bowl. Suitable for any interior style suitable option. Therefore, wanting to repair and replace the bath, the owners of houses and apartments most often opt for acrylic plumbing.

It is also worth noting that bathtubs are on sale. different sizes. They may be quite small. In this category, an acrylic bathtub with a 150x70 cm frame is most often purchased. However, other sizes are also in demand. The choice depends on the dimensions of the bath.

Acrylic has a high ability to retain heat. The water in such a bowl will not cool quickly. At the same time, the inner surface is easy to clean and does not turn yellow during operation. This is true for products made from high quality acrylic. Baths in this case serve for several decades.

During installation, it is important to properly fix the bath in the place intended for it. If this work is done incorrectly, the bowl will be deformed. This is a shortcoming of the presented material. However, it is easy to fix it by doing correct installation.

Sustainability

Installing an acrylic bathtub does not have to be left to the professionals. This work can be done independently if desired. To do this, you need to take into account that the stability of this product in different planes is not the same. So, in the vertical direction, the structure on the legs is stable. Manufacturers create supports that can support the weight of a bowl of water. It is easy to feel if you stand inside the bath.

However, in the horizontal plane, the material cannot boast of stability. Acrylic and steel bowls get out of balance in this direction quickly. If the bath is left to move horizontally during installation, the sewer connection may be damaged.

It is also worth noting that an acrylic bath 170 cm long in a bathroom with dimensions, for example, 180 × 200 cm, can adjoin only one side to the wall. In this case, its side parts remain unfixed. The tightness of the joint between the wall and the bathroom will certainly be broken over time, if other fastener options are not provided.

For a bowl made of acrylic, it is important to choose one of correct options installation. This will securely fix the bowl in a horizontal plane, avoiding trouble in the future.

Wall mount

If you need to fasten an acrylic bathtub 170, 180, 150 cm wide or another size, you can place it in one of four positions. Possible the following options:

It is believed that the most durable installation option is to install the bath in a niche. This can be done in typical Khrushchev. In such apartments, the bathroom is very small. Therefore, by purchasing an acrylic bathtub 150x70 with or without a frame, you can ensure that plumbing fixtures are securely fixed between three walls. If the room is spacious, such an installation will be more difficult. You will need to build another partition to create a niche of the required size.

However, there are many ways that allow you to firmly fix the bath. It may not contact the walls at all. True, it is much more convenient when the plumbing is not located in the center of the room. This option is only suitable for owners of very spacious rooms.

To perform the correct installation, you need to use special clamps. The fastening material must firmly hold the bathtub in the wall. Its main element should be bent up. This will allow him to get close to the wall below. The side of the bath is put on fasteners. So he can press close to the wall from below.

In order for the latches to perform the functions assigned to them, it is necessary to perform accurate marking, as well as control the position of all components during the installation process.

Factory fasteners

How is an acrylic bath attached to the wall? There are several options for such fixation. A reinforced steel frame may be included in the scope of supply. This is a prefabricated structure, which is made of a steel profile (square section). This frame is attached to the bottom of the bath. The design assumes the weight of the bath, water and a person, evenly distributing the load on the support posts, horizontal structural elements.

Do-it-yourself installation of an acrylic bathtub on a frame is simple. The design allows you to firmly fix the bowl. It can be installed even in the center of the room. She won't wobble. However, not always in the delivery set there is a similar frame. Sometimes, in order to save money, the manufacturer replaces it with two cross bars. They possess short legs. In this case, the installation of an acrylic bathtub on the frame with your own hands should be done next to the wall.

It is worth noting that simply propping the bowl against a vertical surface will not be enough. Over time, it will begin to move away from the wall. There will be a gap between it and the bathroom. To prevent this from happening, fixing the acrylic bath is carried out using special brackets. They can be purchased at a specialized store.

Before fixing the bath with brackets, it is recommended to glue the side with double-sided tape or sanitary sealant. After that, the product is attached to the wall with brackets. This option is also suitable if the owners want to finish the outer side of the plumbing tiles.

Insert into a niche

Considering existing methods attaching the bath to the wall, it should be noted such an option as a tie-in into a niche. It is suitable for a room in which there is not even a rough finish yet. To perform such an installation, a strobe is cut out in the wall. It must be created at the correct height.

For this, the structure is assembled, installed on legs. Then it is attached to the wall. The installation height of the bath is determined. A line is made according to the level of its side. Moreover, it must be taken into account that tiles can still be laid on the floor, due to which the height of the base will rise. The edge of the rim of the bath will have to enter the strobe and rest on its edge inside the wall. The depth of the cut must be at least 5 cm.

When the bath is installed in the place intended for it, the tile is installed on the wall. The joint is coated with sealant.

metal corners

If the decoration in the room has already been completed, metal corners can be used. First, the installation height of the bath is determined. At the required level, holes are created using a perforator. Dowels are inserted into them. Next, corners are applied to the wall (if necessary, holes are also made in them). The latch rod is screwed into the prepared seat.

On this corner put on the side of the bath. He will rely on her. Next, you just need to coat the joints with sealant.

Step-by-step instructions for fixing to brackets

Fastening the side of an acrylic bathtub to the wall is most often done using brackets, corners or brackets. Installation in this case occurs according to the same method. It is worth considering in more detail.

First you need to do correct markup. A line is drawn on the wall, which corresponds to the location of the edge of the bath rim. For this, the structure is assembled using a factory frame or cross bars with legs. The adjusting screws of the latter must be set to the middle position.

To mount the acrylic bathtub to the wall, the bowl is placed against a vertical surface. On the side, markings are made on the wall. It is important to find out the features of adjusting the legs horizontally. Subsequently, it will be necessary to adjust the height to the height of the fasteners. The markup is checked using a level. It must be even. Otherwise, the bath will be skewed.

Completion of installation

Next, the selected type of fixture for the bath is installed. Fasteners are embedded in the wall. For this, a puncher or a powerful electric drill is used in the work. Thereafter assembled structure bath and frame is mounted on brackets. The side should engage with the latches.

After that, using the adjusting screws on the legs, adjust the height of the bath. Its position is checked with building level. Only after the bowl is in the correct position, you can connect the siphon. There are also plumbing connections. After that, the room can be finished (if it has not been created earlier). The joint between the bathroom and the wall is treated with sealant.

It is worth noting that these recommendations apply to conventional acrylic bathtubs. If the design provides for hydromassage, it is better to entrust the installation to professionals. In this case, the operation of the system requires correct connection not only to plumbing communications, but also to electronics. Therefore, it will be difficult to do such an installation with your own hands. Specialists will be able not only to correctly connect all the elements of the system, but also to firmly fix the bath near the wall.

brick frame

In addition to attaching an acrylic bathtub to the wall with brackets, corners can be used more radical way. It allows you to firmly fix the structure, eliminating the possibility of loosening it. This method involves the construction of a frame made of bricks.

In this case, from blocks and cement mortar a wall is being built desired height. In this case, it must be taken into account that there must be a distance between the bottom of the bath and the floor. should not be monolithic. It should have a hole that provides access to the siphon.

With the help of bricks and cement mortar, a niche is built in the bathroom. It will have a bathtub. Proceed to construction work You can only after purchasing a bath. A niche is created specifically for the specific dimensions of plumbing. This method involves inserting bolts into the wall, on which the bath will rest on the opposite side.

Between the bottom of the bath and the base of the room, it is recommended to lay a layer of mounting foam. In this case, damage reverse side bowls will be almost impossible. Also, a special mounting film is laid down. When installing the bath in the prepared space, water must be drawn into it. So she sits better in a niche.

The bath is installed in the created niche only after the solution and polyurethane foam dry completely. All seams are then treated with sanitary silicone.

Some rookie mistakes

Fixing an acrylic bathtub to the wall can be done by inexperienced craftsmen. In order for the installation of the bowl to be carried out correctly, you need to take into account several simple tips. Some beginners make mistakes during fixing plumbing to the wall. As a result, the bath staggers, the joint, sealed with sealant, begins to let water through. If no action is taken, the drain system or tub body may be damaged.

To avoid problems later, you should not think that by moving the bath close to the wall and covering the joint with sealant or a special solution, you can achieve good fixation. To achieve this, you need to use brackets, brackets or other appropriate fasteners. You can also make a cut into the wall, creating a strobe. However, ordinary mortar or sealant will not be able to firmly fix the bath against the wall.

It is also worth noting that many craftsmen cover up the joints with solutions on plaster base. Of course, such compositions are distinguished by whiteness. But gypsum mixtures are categorically not suitable for wet rooms. Therefore, when creating a finish, you need to use special sealants in white or transparent color. They should include antiseptic components. Through the use sanitary sealant fungus and mold will not form at the joints.

Having considered how to mount an acrylic bathtub to the wall, you can do the installation yourself correctly. Plumbing in this case will last a long time, will not loosen and collapse.