Folding bench with backrest drawings. Do-it-yourself garden bench with a backrest: drawings and photos of successful designs

garden benches: the topic of today's article on sat. Drawings, photos, and instructional videos for manufacturing garden bench with your own hands, as well as construction tips, you can find in this article.

Arrangement of a personal plot is carried out by various methods: they are installed and, paths are laid, they are broken. The final nuance is garden furniture. For arranging a small recreation area just the same and suitable garden bench.

garden bench with a back can be a key element in the design of the local area

Garden benches their types

The modern range of garden furniture is quite extensive. Classification of products is carried out on the basis of such features:

specifications;
material;
functionality.

Wooden bench located on the veranda of a private house

Functionality of garden benches

Functional features of furniture are valued along with their practicality and durability. All products are divided into two large groups:

benches used exclusively for sitting;
multifunctional benches (the product can perform several functions - be a bench, rocking chair or table).

Bench with back made from logs and boards

Useful advice! Use the unusual design of the transformer bench to save space in the garden. It can easily be converted into a table for writing or eating outside.

Many homeowners install. To create them, materials of various types are used, and the structures themselves can be given an interesting shape. To make it convenient to use such a bench, it is imperative to build a canopy over it. It will provide protection from the sun and rain.

Bench-swing- excellent garden furniture

Popular for making do-it-yourself benches that have a stationary type of placement. Most often they are made of concrete or brick, and a special place is selected for installation. Such products are not afraid of the influence of the sun and moisture.

Exists folding benches with small dimensions and mobile design. They are useful if the suburban area is rarely used. During the absence of the owners folding benches removed to the garage for storage or to the house.

Combined bench made of wood and metal with forged elements

Useful advice! Take oak or larch for work.

In order to protect the surface of the product, it is necessary to cover it with a varnish or paint. This will prevent damage to the wood, which is caused by insects, fungi, mold, as well as moisture and sun. Using a lacquer as a finish will help preserve the natural grain of the wood.

Metal products are characterized by high strength and long service life with minimal maintenance.

Photo of original benches

If you prefer practical options for benches, you should pay attention to products made of stone. This type of material is characterized by low cost and long service life, and the structures are durable, reliable and aesthetically attractive.

The stone belongs to the category of materials of natural origin. Despite this, the designs of such shops will not always be able to support any. Stone elements must be present on the site as an addition. The shops look especially advantageous against the backdrop of a residential building, partially made of stone.

Bench lined with natural stone, with soft mattresses and multi-colored pillows

A good ensemble will be made of stone:

steps;
tracks;
reservoirs;
gabions;
flower beds.

Supports, arbors and awnings can be made of stone partially or completely. If at least one of these elements is present on the site, stone shops will always fit in. However, it should be remembered that such products do not have a back.

Even the simplest stone bench looks elegant, noble and solid.

Photos of garden benches made of plastic and other materials

Plastic products have a number of advantages, which include:

simplicity and low weight of the structure, due to which the transportation of the material does not cause difficulties, and the bench itself can be moved from one place to another;
profitability;
an extensive selection of color solutions, which allows you to make a product that will subsequently fit well into the design of the garden;
practicality (folding-type structures are easily disassembled and stacked in the trunk and also easily assembled on site).

Plastic benches are light in weight, making them extremely mobile and easy to transport

Useful advice! Use your own hands to create designs from combined materials. You will be able to endow your product with positive performance characteristics that are inherent in each type of raw material used.

Combined combinations of materials of different texture, texture, color and origin are used not only for decorative purposes. The most common option is a combination of stone and wood.

Combined bench built from metal and wood

Designs made of wood and complemented by stone or metal elements look original. In such projects, wood creates a soft and beautiful texture, while stone and metal are responsible for strength.

Making garden benches with your own hands

bench designs have some distinctive features. Building a garden bench- the easiest way to organize a seating area in the garden. The product does not have a back and, unlike benches, has a simple external design.

Creating a bench– a quick and easy way to organize a place to relax in the garden

Created with a back can have a more complex decorative design:

non-standard form;
armrests;
design, decorated with carved and forged elements.

Photos, ideas for making garden benches

To revive the design of a simple bench, it is not necessary to invent complex drawing and puzzle over the creation of additional accessories for the garden. It is enough to use two wooden boxes and several boards.

original wooden bench with table designed to seat two people

The boxes in this case will serve as supports. After making the bench, they can be filled with earth and organize a small flower bed. A seat is made from the boards, which is installed between the boxes. The material must be sanded well with sandpaper, remove all irregularities and burrs.

Useful advice! From benches based on boxes, you can make a garden bench with a backrest with your own hands. It is enough to install the structure against the wall and nail several boards on its plane in the required place as a back.

Rice. 1-1. Bench drawing with wooden boxes for flowers: 1 - bench arrangement and calculation of materials: A - logs (2x4 boards 17 1/2" long - 6 pcs., 2x4 boards 20 1/2" long - 4 pcs.); B - drawer bottom (3/4 plywood 20 1/2” x 20 1/2” - 2 pcs.); C - trims (1x4 boards 23 1/2” long - 16 pieces); D - side lamellas (boards 1x6 25” long - 32 pieces); E - trims for facing the top (2x4 boards 45" long - 8 pieces); F - seat frame (2x4 boards 63" long - 2 pcs., 2x4 boards 17 1/2" long - 2 pcs.); G - cross bars (1x2 boards 17 1/2” long - 5 pieces); H - seat (boards 1x4 60" long - 5 pcs.); 2 - side facing; 3 - installation of the walls of the flower box; 4 - mounting dimensions of the walls of the box; 5 - diagram of the device for the bottom of the flower box

Wood structures have a certain disadvantage. The material itself requires constant care, and in this case the tree is also in contact with the soil, it is necessary to periodically water the plants. To make a bench more practical, wooden boxes can be replaced with concrete or stone pedestals. Concrete flower beds can be made independently or purchased at the store.

For the seat, you should use processed boards or half a log. The choice of raw materials depends on the style in which the design of the garden or patio is made. It is recommended to fix the seat with metal corners fixed to concrete using dowels, and to wood using through bolts or self-tapping screws.

Rice. 1-2. Bench drawing with wooden flower boxes: 6 - mounting dimensions of the seat frame; 7 - strengthening the design of the bench; 8 - installation of seat rails; 9, 10 - drawer installation

As supports, you can use flowerpots with dwarf trees or ornamental bushes. The only, but very important requirement is that the container must be very strong. A hole is cut into the seat in the shape of a flowerpot in the place where the legs of the benches are usually located. The size of the hole should be sufficient to allow the plant to grow and care for it, however, it should not exceed the size of the container. Essentially, a plank seat is placed on top of the flowerpots and fixed by gravity and the weight of those seated.

corner wooden bench with flower boxes, installed on the veranda of a private house

Garden bench in ethno style

Ethno and rustic design styles are often used in interior design. A country house, cottage or cottage is a great place to create an eco-friendly and natural corner suitable for a family vacation. This design can be continued in the garden. For this, it is enough make a bench with a back from logs (Fig. 1) and other natural materials.

Useful advice! For the construction of the structure, logs with or without bark can be used. To process the material or leave it in its original form - depends on your wishes and the design of the site.

benches made of logs are distinguished by originality and environmental friendliness

The principles of making a garden bench from a log

To form a seat, it is enough to saw a tree trunk along. This can be done exactly in the middle (in the diameter zone) or by moving the saw closer to the edge (in the medium diameter zone). The back is made from a thinner tree trunk, or you can cut closer to the edge. As a result, this element must be thinner and lighter than the seat part.

Rice. 2. Log garden bench in the courtyard of a country house

Legs can be made from the remains of a log. They are connected to the seat part with metal pins. It is done like this:

In the parts to be connected, holes are made for the pins in the appropriate places. The diameter of the holes should be slightly smaller than the diameter of the fastener.
The pin is driven into one of the holes approximately in the middle of its length.
On top of the free edge of the pin, the second part to be connected is placed and also hammered. In this case, the blows fall not on the pin, but on the wood.

Ethno and rustic styles are great for decorating a personal plot

Fasteners are hammered with a sledgehammer or hammer. Since wood is a fairly soft material by its structure, hammer blows can damage its surface. To avoid this, you need to put an unnecessary board under the instrument.

Pins provide a reliable connection of all parts. To strengthen the fixation, you can install 2-3 pins.

Bench with back made using logs

Ethno-style in garden benches building ideas

In the ethno style, you can create a design with a non-standard design. The highlight can be, for example, the manufacture of a bench using curved branches of different diameters. Before assembling the product, these branches are processed and skinned. In other words, the bark is removed from them, and then the surface is polished with sandpaper. An unedged board must be used to assemble the seat. It is processed in a similar way.

Various options wooden benches created in ethno style

Note! All elements of this design have rounded shapes, and the seat boards face forward.

If your summer cottage has a wicker fence, you can use the same design option with some changes. Short seat boards can be replaced with long ones by placing them along. The back is formed according to the principle of weaving from branches of medium thickness, which bend well.

Rustic bench will become a unique object in the garden

To make a wicker back, it is not necessary to have any special skills. You may not get a very neat result, but this is not necessary. The back should be simple and unobtrusive, coarse weaving will only increase its decorative properties. Branches can be placed tightly or, conversely, leave gaps between them so that your bench “breathes”.

Bench made of logs installed on a closed veranda of a country house

Bench - an alternative to a garden bench

Despite the absence of a back, this scheme (Fig. 3-1) for making a bench looks quite attractive due to the characteristics of the material from which it will be made. The design itself has a very simple structure, so everyone can handle the technology of its creation.

For the legs you will need a rounded beam. If you have logs with a small diameter, you can save on the purchase of material and trim them yourself. The original appearance of the bench is obtained due to the fact that the bars are stacked one on top of the other and fixed. The result is a beautiful support for the product.

Rice. 3-1. The procedure for manufacturing a simple wooden bench: 1 - drawing up a design drawing

Calculation of parameters and required materials

The height of the bench can be adjusted according to your needs. This indicator also depends on the diameter of the timber that will be used in the work. To calculate the amount of material, you need to determine how many bars will be stacked one on top of the other to form the required height of one of the legs.

Size chart:

In our case, 5 bars are required, the length of which is 0.45 m. Calculation formula: 5x0.45 \u003d 2.25 m. Based on this, 4.5 m of timber (2.25x2) will be required to build two supports. The seat will consist of five boards 1.2 m long. For its manufacture, the following amount of material will be required: 5x1.2 \u003d 6 m.

Rice. 3-2. The procedure for manufacturing a simple wooden bench: 2 - cutting wood for the legs of the bench; 3 - drilling holes in the details of the legs; 4 - preparation of boards for the seat; 5 - processing the edges of the seat parts

Useful advice! To round the edges of the timber, you can use a cutter or purchase ready-made profiled material. Its cost is higher, but profiled timber is much more convenient in work.

Initial stage: preparation of the material

To begin with, boards for the seat are being prepared. The material is cut into the required number of boards of the appropriate length and processed. Sharp corners should be rounded off. Take advantage of the capabilities of a milling cutter or grinder for this. If you do not have such a tool at hand, it will be enough to process the edges with sandpaper.

Rice. 3-3. The procedure for manufacturing a simple wooden bench: 6, 7 - marking the details of the legs; 8 - drilling holes at the intended points; 9 - applying a protective coating to the parts of the seat

Grinding with sandpaper is a long and laborious process. To simplify your work, you can order the grinding of the material at the sawmill. After the boards are prepared, they need to be opened with a varnish composition. It can be a completely transparent varnish or a tinted composition (the choice of topcoat is up to you).

The bars intended to form the legs of the bench are tightly stacked next to each other so that their edges form a straight line. Using a pencil and square, mark the areas where the fasteners will be installed. The lines should be distributed along the entire length in increments of 7-10 cm.

Rice. 3-4. The procedure for manufacturing a simple wooden bench: 10, 11 - fastening the legs to the seat; 12 - view of the finished product

Assembling a garden bench: mounting fasteners

Metal pins will be used as fasteners. An alternative replacement for them can be dowels made of wood. Holes are made for the installation of fasteners, the diameter of which is slightly smaller than the diameter of the pins, and the depth is half the length of the pin.

To fix the parts, the fasteners will be hammered into one of the bars, and the next element will be pushed through the hole on top of it.

Photo: a bench without a back can be used not only for sitting, but also as a table

Useful advice! Assembling the structure with pins is a reliable method of fastening. To increase the strength of fixation, you can use the adhesive composition during installation, but this technique will make the structure non-separable.

The pin connection is also used in the process of creating according to the drawings do-it-yourself benches for summer cottages from a tree which design is completed with a back. A qualitative result can only be achieved if all the holes are located strictly one above the other. As a result, all parts during assembly should form an even edge line.

White painted wooden table and benches form a cozy dining area in the garden

After drawing the marking lines, you need to measure the distance from the edge, which should be the same. For these purposes, it is recommended to create a template. It is enough to take a piece of the bar, the width of which is 1.5 cm. It will serve as a kind of limiter. In other words, a distance equal to the width of this bar will separate the holes from the edge. Attach the template exactly along the edge line and mark the intersections with the already existing perpendicular markings.

The installation of the pins must be done in a checkerboard pattern, so you should place the holes not at each intersection of the lines, but through one. Holes are also made on the other side of the bar. They should be staggered in relation to the holes that were made earlier. As a result, when connecting the legs to the seat, each plank will have a pair of pins.

Photo: bench with back built from wood

The final stage of building a bench made of wood with your own hands

From a technological point of view, the previously described type of connection can be considered correct. However, the scheme of its installation is quite complicated for a person who does not have the necessary skills.

There is an easier way to fasten the structure:

The bars are stacked on top of each other.
Folded parts are fixed with clamps.
Through holes are made at three points (in the center and along the edges).
Through the holes, the parts are fastened with a long stud (do not forget to put washers under the nut and cap).

Photo: original bench made from an old wooden bed

After that, the seat boards are nailed to these legs (on top) or you can make a pin connection in this place.

Useful advice! To hide the placement of the nails, prepare a masking composition from a mixture of very fine sawdust and mastic intended for wood. Choose mastic to match the shop. Apply this mixture to all joints. After drying, the surface should be sanded.

The idea is simple board benches attached to a tree in the garden

When the assembly of the structure is completed, grind all the parts. Their surface should be as smooth as possible. After that, you can apply the finish coat. Use for this purpose a varnish composition or wood paint intended for outdoor use. It is better if the finish coat is translucent. In this way, you can leave the natural pattern of the wood visible.

Photo: wooden benches with comfortable soft seats, decorated with pillows

Garden bench: drawings and photos, for making your own hands

Bench due to the presence of a backrest, it has a more convenient design than a bench. You can lean on it and relax your back. The capacity of such products may be different, but usually drawings garden benches wooden do it yourself are made up for 2-4 persons. This is done for the reason that the long structure needs to install an additional support. As a result, the process of creating a product becomes more complicated. In fact, there is enough space for 2-4 people, so you can limit yourself to making the simplest designs.

The bench, due to the presence of a backrest, has a more comfortable seating design compared to a bench

Garden bench with a back: drawing for manufacturing

To make a bench with a wooden back for this project (Fig. 4) with your own hands, you need to acquire the following tool:

drill;
a set of drills;
hacksaw;
planer.

Note! The design is intended for installation in the garden, on the balcony or terrace.

benches, built of wood, harmoniously fit into any landscape

It will take you no more than one day to complete all the work on creating a bench. A square bar made of pine will be used as the main material. The parameters of its section are 6x6 cm. You will also need "twenty" boards. Before cutting these boards, they should be planed until parts with dimensions of 5.8x5.8 cm are obtained.

Bench for giving: instructions for making

Bench assembly from pine bars is carried out in the following sequence:

with the help of dowels and adhesive composition, we assemble the legs for the U-shaped sides. Then, using the same fastening method, we fix slats (5.8x2 cm) and prongs (3.5x3.5 cm) mounted on the sides on them;

Rice. 4. Drawing of a wooden bench with back for two persons

to mark the locations of the reciprocal holes for mounting dowels, use a marker;
connect the sidewall and the longitudinally located rail. In order to mark the position of the sidewall, a 2 cm thick spacer should be used;
fix all elements while drilling holes with clamps. This will allow you to achieve accurate mating between the connected parts of the structure;
before performing the final assembly, sand all the elements well.

The last stage of construction is the application of a protective agent and a top coat.

For a longer service life, wooden structures need to be treated with a protective agent and applied with a topcoat.

Garden benches made from pallets

From such improvised materials as pallets, you can create an interesting bench design (Fig. 5). It can be installed not only in the garden, but also on the terrace and even inside the country house. Three pallets are required for work.

Manufacturing steps:

one of the pallets is divided in half. These halves will subsequently be the back of the product. Cutting must be done so that after assembling the parts of the back and seat form a figure of a geometrically correct shape, and all edges coincide;

Rice. 5. Manufacturing procedure pallet benches in six photos

two other pallets are knocked together with nails. We fix the back halves to them;
a mattress of the appropriate size should be placed on top of the structure. You can use cushions from an old sofa, reupholstering them first, or sew new ones. You can also put a few small pillows on the back.

Using wooden pallets is a fun way to create original garden furniture.

Useful advice! You can leave the mattress lying still or fix it with straps. For greater functionality, wheels can be added to the design.

Drawing garden bench "Transformer"

For the manufacture of the structure, you will need to purchase pine lumber.

Materials for work:

Features of the manufacture of a transformer bench

Following the step-by-step instructions, you can create an interesting bench, the design of which can be transformed into a table with two benches (Fig. 6).

Main stages making benches:

having created the supporting parts according to the drawing, attach 3 boards to one of them. The seat will be formed from these boards. At the same time, do not forget to step back from the end part by 5 cm. 4 self-tapping screws must be installed in each board. Two of them will fix the seat to the support on one side, the rest are designed to fix the seat to the other support (on the other side of the product);

Scheme with mounting dimensions transformer benches

for each nodal assembly zone, it will be necessary to install 4 fasteners;

Useful advice! When assembling the assemblies, apply wood glue to these areas. The adhesive composition will increase the strength of fixation and the durability of the entire structure.

after all the parts are prepared for work, the legs, which have backrest and seat support, should be sawn from the end at an angle of about 75º. Using self-tapping screws designed for working with wood, connect the legs in pairs with the middle bars. The optimal length of fasteners is 5 cm;

Rice. 6. Drawing to create a transformer bench: 1 - kinematic diagram of the transformer in the "table" position (1 - position limiters B (pipe 20 × 20 mm, length 35-49 mm), 2 - support rod); 2 - detail C (pipe 40 × 20 - 2 pcs.); 3 - connecting jumpers (pipe 20 × 20 mm). D - for an external bench, D1 - for an internal one; 4 - parts B, B1 (pipe 40 × 20 mm). B1 is mirrored with respect to B; 5 - bench leg (4 pcs.), where: A - steel pipe 40 × 20 mm, 1 - jumpers (pipe 20 × 20 mm - 4 pcs.), 2 - support rod

next is the back. In the process of transformation, it turns into a countertop. Locate the longitudinal edge of the support board. Its length is 32 cm. Here you need to attach three boards 150 cm long. In this case, the indent from the end in this case will already be 8 cm;
boards are mounted so that a gap of 1 cm is formed between adjacent elements;
in the support board, you need to make 3 holes, the diameter of which is 0.8 cm. It is better to perform this procedure in advance. These holes will be used to fix the back of the bench in a horizontal position.

One-piece wooden structure for the garden, consisting of a table and benches

The final stage of the construction of the transformer bench

To create axes of rotation, make 2 holes in the top of the rear leg. Fixing the back to the base of the product will be carried out by a pair of M8 bolts.

One of the holes made will be axial, the second - ordinary. To simplify the operation of the bench, equip the bolt in the area of \u200b\u200bthe axial hole with a nut with 6 edges, for the second, a wing nut is suitable. She should bend her mustache. Due to this simple manipulation, fasteners can be turned away / wrapped without the use of additional tools, but only by hand force.

The key link in the patio is a wooden bench with a back

Upon completion of all work, you need to check the design for operability. Set the backrest in an inclined position and secure it with bolts. Remove the fastening element from the hole and move the backrest to a horizontal position. To fix it, place the bolt in its original place and secure with a nut. The design is completely ready for operational use.

While creating garden benches you can experiment and appear fontasiya. The main thing is that at the same time the product turned out to be durable and practical.

With the onset of summer, it becomes impossible to sit in the house - you want to spend as much time as possible on the street. Today we will show you three ways to make benches with your own hands.

Your bench option will depend not only on the model you choose, but also on the materials available to you. After all, often a bench made with your own hands from improvised materials looks both neat and interesting.

Each bench option needs its own skills, but even someone who does not have special skills in working with the tool can easily make the first bench.

Do-it-yourself benches in half an hour

Here is an example of the simplest bench you can think of. With all the materials, such a bench is assembled in a matter of minutes!

All you need is eight cinder blocks with through holes, four pieces of wood, and construction adhesive. It is better to choose the bars according to the width of the holes in the blocks, but if they are a little narrower, then this is not a problem.

Be sure to sand the wood surfaces to avoid splinters.

Blocks and bars can be painted if desired to give the bench a more pleasant look.

It remains to install the blocks vertically, having previously lubricated the contacting side surfaces with glue, and insert the bars into the holes. Once the glue is dry, the bench is ready! Optionally, you can equip it with pillows: it will be more beautiful and comfortable.

How to make a wooden bench with a metal frame yourself

If you have at least minimal welding skills, then here is a project that will suit you. The bench stands on two metal supports and it turns out simple, but reliable. You will need a profile pipe or a thick plate for the supports and, of course, a wide seat board.

If you are far from welding, then you can assemble a metal frame on the corners and fasten it with metal screws.

After the bench is assembled, the metal legs should be treated with a metal primer that will protect them from corrosion and then painted with an exterior metal paint.

The wooden seat of the bench should be painted with varnish or paint for outdoor use. Such a simple version of the bench with your own hands will serve you for many years.

You can experiment and create your own bench design. For example, such a laconic designer bench is quite within your power. it is done in exactly the same way.

How to make a bench with a back

It is easy to attach a back to a bench standing on metal supports.

To do this, you need to take metal plates and bend them at the right angle. This is easy to do even with your hands, or you can fix the edge of the plate and bend it with a hammer. The plates will act as a support for the back. With one end we fix the plates from below under the seat, and fasten the back to the other end.

It is better to drown the bolts on the back (and on the seat too) into the tree so that they do not create discomfort.

If you don’t want to mess around like that, then you can use bolts with a round cap.

A more advanced backrest solution is to attach it to the frame rather than the seat. This design is definitely more reliable.

To do this, you will have to weld some parts at an angle, because it is more convenient to sit on a bench with an inclined back. And this requires great care.

There are special devices that allow you to fix the parts to be welded at the right angle - they are called magnetic holders or positioners.

But there is also a "folk" method. Make a wooden blank and attach the parts to it while welding. So you can weld the required number of supports, accurately maintaining the same angle.

It remains to attach the back to the frame, and the bench is ready!

DIY benches from old furniture

Old unnecessary furniture can still serve us in the country. You can practically make benches yourself.

We do not throw out an unnecessary crib, but we make a bench out of it with our own hands. One of the backs of the bed will be the back of the bench. The second backrest is divided into two parts: the lower part is the lower front part of the bench; the upper part is divided into two parts and serves as a bench handrail. The bench has a convenient storage box for pillows.

The wooden bench has been converted from a regular sized bed. Provide a small box for storing pillows in the seat, then you will not have to carry pillows from home all the time and come up with places to store these pillows.

Run out of beds? You can make a bench with your own hands from an old shelf - they painted it and made a pillow, that's all the work. But this simple shop can turn almost into a throne if you have an old unnecessary door in stock. From it you can make a beautiful high back for a bench. By the way, old wooden windows can be adapted for the same purposes.

Even if you don’t have a single board, you can still make a bench for your favorite cottage!

That's all! Simple do-it-yourself benches can be made in just a few hours, while not spending much on materials. And it will definitely become a favorite vacation spot for the whole family. After all, it is so nice to read, drink tea, chat with friends or even work on the bench, taking your laptop with you!

Each household plot should have several benches and benches with backs, so that in good weather you can relax on the street, sit under the gentle sun and just take a break from working in the garden. You can buy such a wooden or metal bench, or you can just make it yourself. In this article, we will look at what types of benches are and how you can make one of them yourself, having all the necessary tools and materials at hand.

How are the views

There are a large number of benches with a back, and each owner of a country house or cottage chooses for himself the option that is most suitable for the exterior of his backyard.

Benches are very different depending on their scope.

Ordinary benches with a back are suitable for any personal plot and fit perfectly into the exterior of the yard. They are comfortable and very practical, as they have a simple design and unpretentious in their appearance. Suitable for installation near the house, in the gazebo, near the pond, etc. They can be made of wood, metal, stone, and also be combined (wood and metal, wood and stone, wood and brick, plastic and other building materials).
Corner benches will look great where you can’t put an ordinary large bench with a back. They can be placed in the corners of the gazebo, in the gardens, as well as in any convenient place on the plot. Such benches can be metal, wooden, stone and combined.
Ordinary backless benches can be installed anywhere, as they are versatile and comfortable enough for any country house. They can be easily made by hand, as they are made according to the most common standard drawing of a classic type.
Oval, round or semicircular benches with or without a back will look great in the center of the same round gazebo, in the center of the garden or anywhere else, where they will create an aesthetic exterior for the entire backyard, and also perform their direct functions. Also, in the center of a round bench, a tree, a green bush can grow, a beautiful flower bed can bloom, or even a children's sandbox can be located. It all depends on the imagination of the master and the functional needs of the owners of a country house or cottage. They can be made of wood, metal, stone, as well as in a combined form from various natural materials compatible with each other.

Photo gallery: do-it-yourself garden benches with a wooden back - types and designs

Wooden bench with metal legs for the garden Wooden bench with wrought iron legs for the garden Corner wooden bench with brick support Semicircular wooden bench on a brick support Bench from a wooden beam for a garden with a back Decorative wooden garden bench with flower box supports Classic wooden garden bench with rails and backrest Round wooden bench with backrest for the garden The original bench from a solid log for the garden Wooden bench on supports made of natural stones for a personal plot Wooden bench with concrete supports in the form of flower beds Wooden bench with wooden supports in the form of flower beds Wooden bench with wicker back for the garden Stone design bench for the garden Square wooden garden benches

Preparatory stage: drawings, dimensions, angle of inclination

Before you start making a bench for your backyard from any type of material, you need to take all measurements and draw up an accurate drawing of the future design. This is necessary so that it turns out to be even without distortions and rolls. Also, the design scheme will help to calculate the required amount of material for the manufacture of shops of any type.

For the manufacture of wooden structures for a personal plot, pine, oak, birch boards or logs are usually used, as well as pear, hornbeam and durable larch. Almost any tree is easy to process, has excellent decorative qualities, and also fits aesthetically into the country landscape. The main advantage of wood is its beautiful aesthetic appearance. But meanwhile, it negatively tolerates sunlight, high humidity and low temperatures (hard frosts). Therefore, it is best to install wooden benches in closed gazebos, on terraces covered with tents, or make them portable (collapsible) so that you can clean them indoors (pantry, basement, closet) for the winter.

Steel supports will be the most competent choice for making a bench with a wooden seat and back to place it on the territory of a summer residence or a country house. Such a bench will serve you for at least 15 years, and it will not need to be removed during snow or rain.

How to make a wooden bench with a backrest with your own hands

To make a wooden bench, we need:

Before proceeding with the manufacture of a wooden portable bench, it is necessary to saw the boards into certain elements:

All prepared boards must be sanded, all sides smoothed and soaked well with an antiseptic. Then leave until completely dry.
We mark the height of the bench 40 cm. Starting from the very middle in the upper part of the elements of the longest legs that will hold the back, it is necessary to make an oblique cut at a slight angle of about 20 °. Then all the corners of the bars must be cut and sanded on both sides. In this case, the back will have an inclined shape. The sections must be strictly the same, otherwise the bench will end up skewed and will have an unattractive appearance, and it will be uncomfortable to sit on it.
We collect the legs of the bench. The distance between the legs should be about 28 cm. The front (facade) and rear wooden pairs of benches for support from the invisible inner side must be fastened with prepared bars and self-tapping screws. We connect the legs with a beam, which we cut to the entire width of the structure - by 50 cm. The strapping is best done double - from above and below.
In order to protect self-tapping screws and screws from premature corrosion, it is necessary to pre-drill the necessary holes and slightly deepen their heads into the board.
On the frame of the bench, as shown in the drawing, at certain intervals (1 or 2 cm), we nail or fasten the planks. Three planks for the seat and two boards for the back. After all the elements are stuffed, it is necessary to check the correctness and evenness of the entire structure with a level. For greater reliability, stability and rigidity, the legs at the bottom are knocked down with planks on both sides. It is advisable to leave gaps of several centimeters between the planks for better air circulation and drainage. We fasten the back (first bar) at a distance of 20 cm from the seat, and the second - at a distance of 38 cm from the seat.
The design of the bench needs to be strengthened and for this it is necessary to make the lower trim of the legs. To do this, we take two beams 1.5 meters long and fasten them to the front and rear legs of the bench frame.

Shop decoration

After completion of all carpentry work, the bench must be completely treated with flame retardant and then coated with several layers of waterproof varnish or ordinary oil paint.

If you want to make the shop more aesthetic and beautiful design, you can simply saw the boards lengthwise and then stuff them diagonally, crosswise or herringbone.

Making a garden bench from wood and metal

A bench with a back, a wooden seat and strong metal legs will be the best option for garden furniture that can be installed in your backyard. Such a design, even in winter, can be left on the street without any problems.

Material calculation and necessary tools

To make a bench, we need:

One iron corner with a shelf measuring 40 - 50 mm;
One beam for the manufacture of bench seats with a thickness of 40 mm;
Special bolts;
Hacksaw or grinder;
Drill;
Screwdriver;
Welding electric or gas machine;
Sandpaper or grinder.

Step-by-step instruction

The metal corner must be cut into four pieces of one meter each for the manufacture of vertical supports for the structure. Cut five pieces of half a meter and two pieces of one and a half meters to make a frame for installing a seat and back boards on it.
To make the back and seat, we cut off seven planks from a bar 1.5 meters long and 10 cm wide. We grind them and smooth all the side parts well. Soak all the boards well with an antiseptic and leave to dry completely.
We cut the ends of the joining parts from iron corners exactly at an angle of 45 ° and then connect them in series using hot welding. To begin with, we make a frame for the seat device and weld the iron legs well for subsequent attachment of the backrest to them, as well as the stops. In the process of welding, it is necessary to use protective equipment.
In the boards of the seat and back, where the fasteners will be, it is necessary to drill holes for special bolts. After welding, the metal structure must be well sanded at the seams in order to eliminate all irregularities and bumps. Then treat the metal with a special anti-corrosion coating and oil paint in two layers.
We bolt ready-made back and seat boards to the finished metal frame. We pre-impregnate the boards with a flame retardant (preferably saline) and then cover with a good layer of water-repellent varnish or colored paint.
On the ground, it is necessary to make markings for the legs. To do this, it is necessary to dig four holes about 50 cm deep and pour river sand (about 10 cm) on the bottom, and fine gravel (about 20 cm) on top. We lay pieces of roofing material upstairs and put a reinforcing mesh. We install the legs of the bench in the pits and check the horizontal evenness of the structure with a level. Then we fill the legs with concrete (the ratio of sand and cement is 3: 1).
If you plan to put a bench on a regular asphalt or paved surface, then you do not need to make a concrete foundation. The legs of the structure are made from four pieces of an iron corner about half a meter long. For greater stability to the bottom of the corners, it is necessary to weld square "heels" or strengthen the entire structure with the help of a lower metal frame.

Finishing

All metal structural elements must be treated with anti-corrosion agents and primed. Then paint with regular oil paint.

We impregnate wooden elements with special antifungal agents, flame retardant, and then paint with waterproof varnish or colored oil paint.

If desired, the metal parts of the bench can be decorated with various wrought iron patterns, which can be forged on your own or purchased ready-made from special firms.

Bench for a personal plot on brick supports

Material calculation and tools

To make a bench, we need:

building brick;
Wooden boards (thickness about 40 mm);
A pack of self-tapping screws and screws;
Several bags of cement, fine sifted sand (6 bags or more) and gravel.

step by step

On a stone-paved and concreted area, the bench must be placed on a cement foundation. On soft ground, it will be necessary to make a columnar foundation.

We carry out the marking of the territory for the installation of brick racks and remove the top layer of soil (turf). We dig holes with a diameter of 20x20 cm and a depth of about 50 - 60 cm for the foundation. At the very bottom of the well, we pour sand 10 cm thick and crushed stone 20 cm thick on top. We tamp all this well, pour a little water over it and leave it for a day.
We put several pieces of roofing material on top and place a bunch of five reinforcing bars in the hole. All this is poured with concrete and allowed to harden for about three or four days. For concrete mixing, we take cement, sand and fine gravel (1:3:5).
We put a small layer of liquid concrete (1-2 centimeters) on the prepared foundation. This will be the basis for the future brick decorative base. Next, we begin to lay a brick with dressing. The masonry is made necessary for the construction of the width, that is, such as the shop itself will be or a little narrower. The height of the brickwork should be about 50 cm. Inside the masonry on the top row, we leave a place to form a shelf for the subsequent installation of a bench seat.
We fasten the seat boards together with the help of a board and self-tapping screws. Then we install the finished bench on the prepared brick supports. We impregnate the tree with a flame retardant, let it dry and cover it with a special water-repellent varnish or colored paint.
Also, depending on how long the bench will be, it will be necessary to make several brick supports. Corner or figured (semicircular, round, oval) structures are best installed on a solid brick base, which will be located on a tape-type foundation.

Shop decoration

We treat all wooden planks with antifungal agents and flame retardants, and then prime and cover with waterproof varnish or ordinary oil paint. Brickwork does not need additional finishing, as it looks quite beautiful and aesthetically pleasing on its own. If you still want to make it a different color, you can also paint with oil paint.

Video: how to make a bench for a country house yourself

If you make a bench made of wood and metal with your own hands, you can enjoy the fruits of your labor for many years and relax on it in the shade of fruit trees. With proper and timely care for such a wooden bench with metal or brick supports, it will serve for many years. But in order for it not to suffer from heavy rains or snow in winter or autumn, it is best to clean it indoors, if possible. Regular care can significantly extend the life of your bench in the garden.

In order for the garden plot to be comfortable enough, it should be properly equipped. An important component are garden benches. They can be made independently in different ways and from various materials.

Bench made of concrete slabs and boards with a back

Looking at the drawings of the bench, you can find out the features of its device. You can make such a design with your own hands relatively easily, quickly and without high financial costs.

Making a bench with a backrest with your own hands in a step-by-step instruction is described in great detail.

Assembly: the initial stage

After the preparatory work, the time for wood processing is coming. In order for a do-it-yourself bench with a back to serve for a long time and decorate the site, it is necessary to pre-process the materials.

wood cover antiseptic formulations and let dry. After that, you can start collecting backs.

On one of the two-meter boards, fifty centimeters are measured from the edges. At this level, the edges of the white will be located.tons of slabs. From this mark another fifteen centimeters are measured to the center of the board. Here the first boards will be attached. From the resulting marks we measure seventeen and a half centimeters - the gap between the boards of the back. Next, we measure fifteen centimeters for two more boards. Between them there should be a gap of five centimeters. All this can be seen in the drawing.

Wood glue is applied to sections of fifteen centimeters. Boards are applied to them, the length of which is sixty-five centimeters. Additionally, they are fixed with self-tapping screws.

From above, between the boards of the back, pieces of seventeen and a half centimeters are glued. In order for the parts to stick together well, they are clamped and held until the glue sets. After gluing is completed, the back is covered with an antiseptic.

All wooden parts can be coated varnish. This will give them additional stability and attractiveness.

Assembly of the main part

It is better to collect the main part of the bench from two sides. Concrete slabs are placed between the boards, and M16 threaded rods fifty-five centimeters long are inserted into the drilled holes. They will need four pieces.

The rods are fastened with nuts and washers M16. They are twisted at the same time from different sides to make the bench even.

A simple bench with your own hands

You can make benches for giving with your own hands quickly enough if you follow the instructions. Consider four options for such garden structures.

On the drawings benches detail all its features. Making such a bench with your own hands is quite simple. The only difficult element is the concave seat.

The number of parts and their dimensions are indicated in the table.

The manufacture of benches with their own hands from wood begins with blanks the necessary details. Boards and timber are sawn into pieces of the desired length.

The manufacture of seat supports will be somewhat more difficult. You will need to markup on the blanks. Two points are marked along the edges at a distance of seven and a half centimeters from the bottom side, and in the center a point at a distance of four and a half centimeters. They are connected using a flexible plastic ruler and cut out jigsaw. Sections are treated with sandpaper.

Seat supports are attached to the two upper tsargs. One on each end and one in the middle. Next, the supports are screwed, spaced from the extreme ones by the width of the legs. All connections are made with self-tapping screws.

Boards are attached to the resulting base seats. It is desirable to deepen the hats of self-tapping screws.

Then attach legs. They are attached to the seat supports. The lower tsargs help to fix the legs.

The finished product is covered antiseptic and varnish.

Simple bench #2

To make such a garden bench with your own hands, you will need concrete flower girls and boards. Flower girls are required to create the base of the bench. Use two with a rectangular base and two cubic ones.

In order for the base to be stable, the flower girls must be glued or connected from the inside with staples fixed with self-tapping screws. A layer of drainage and soil is poured into the tank. This increases their stability.

The seat for the bench is made of boards. To do this, they are cut into segments of the desired length. These blanks are laid so that they have a distance of half a centimeter. Then they are connected using cross bars. Planks are placed in three places: along the edges and in the middle. Corners are attached to the planks. With their help, the seat will be fixed on the flower girls.

Do-it-yourself bench with a back

Prepare the details of the bench shown in the figure. They are processed antiseptics before connection.

Then the supports are assembled from the parts. Pre-round the corners and chamfer. First, parts A and B are connected with a bolt, and then B, C and D are also connected using a bolt.

The inclination of the back is determined by part D, after which it is connected to part A. Similarly, but in a mirror image, another support is made.

After that, the back and seat are assembled. To do this, the supports are placed so that there is a distance of twenty centimeters between them. First, the front and rear bars are screwed to the supports, then all the others, and finally the stops are screwed.

At the last stage, the back of this bench is screwed.

Bench #4Another option for a simple do-it-yourself bench. Its length is one hundred and twenty centimeters. The height from the ground to the seat is fifty centimeters, the height of the back is also fifty centimeters.

The base is made from boards, whose thickness is five centimeters, and the width is from ten to twelve. One of the legs continues and is the backrest support. The supports are connected according to the “half-tree” method and fastened with bolts.

The basis for the seat is a bar fixed on self-tapping screws. The short legs on the back of the bench are colleted together to increase stability. The seat and back are sheathed with boards with a smaller thickness. The surface is painted or varnished.

A simple bench with a back for a summer cottage

The dimensions of the structure and wooden parts can be seen on drawings benches. If we consider how to make a bench with our own hands, then this option will be the most optimal in terms of the simplicity of the process and the result obtained.

Materials are best purchased already cut to size. If there is no such option, then you need to cut them yourself.

The resulting blanks polished. The ends of the boards are treated with an electric planer.

The rear legs of this simple do-it-yourself bench are also a support for the back. To create the desired level of inclination, the blanks are marked.

At a height of forty centimeters mark the place of attachment seats. Above the board is cut at an angle of twenty degrees. The cuts on the two blanks should be the same.

Gather first legs benches: the front ones are connected to the back ones with a beam. It is better to do this from above and below.

When the side parts are assembled, they can be connected to each other with seat boards. Screw the boards with self-tapping screws, leaving distances of one or two centimeters.

To strengthen the structure and increase its stability, make the lower strapping bar on the legs. Two boards are attached to the back.

Finish the work with a finish coated which will protect the product from moisture and adverse conditions.

Do-it-yourself pallet bench

Make a bench with your own hands pallets It's easy if you use your imagination. To do this, you need three or four of these wooden structures. Some will need to be cut to get additional details. The simplest do-it-yourself pallet bench design is when two pallets are attached perpendicular to each other, creating a back and seat.

So that the design does not turn out to be too cumbersome, it is better to cut the pallets to the desired dimensions. Fasten the elements with self-tapping screws. Add side details that enhance strength and make legs. All this can be seen in the photo.

Since the material of the pallets is raw, rough, it will need to be preliminarily grind. This will allow you to do without splinters.

The manufacture of benches with their own hands from pallets is being completed with varnish or paint.

Bench puzzle

You can make such a bench with your own hands if you have a wide board and shovels for shovels. Figured seats are cut out of the board in the form of puzzle pieces. Legs from cuttings for shovels are attached to them. Separate stools are obtained, which are quickly assembled into one long bench. All manufacturing steps are detailed in step-by-step photos.

Benches from unnecessary chairs: two do-it-yourself options

First option

To create such a bench for a summer house with your own hands, you will need four old chair.

From the first two chairs filmed parts on the front of the seat.

The rest sawed off the front legs are slightly lower than the seat structure.

From the resulting details you need take off old varnish or paint. To do this, a special agent is applied to the parts that dissolves paint and varnish coatings. Then the softened layer can be removed with a spatula.

The racks should drill dowel holes. Holes are required on the front and end sides.

The dowels are smeared with glue and inserted into the drilled holes.

When the dowels are glued, you can collect base benches. To make the design durable, the parts are fastened with self-tapping screws. Construction surface sanded.

For seats benches choose a board that is suitable in size, saw off the excess.

If several narrower boards are used, then they are glued together with wood glue. For a tight connection, they are clamped with clamps and waiting for the glue to dry.

The finished seat is also glued to the base with wood glue. Heavy objects are placed on the board and clamped together with the base with clamps.

When the glue dries, cover the seat with masking tape and stain other structural elements with wood paint.

The adhesive tape is removed and the seat is processed wood stain. In conclusion, the entire bench is varnished.

Second option

To make a second garden bench with your own hands from old furniture, you will need two chairs. It is better if the back and hind legs are not separated.

Two identical chairs clean up all parts of the structure except for the rear legs with a back.

take bars 5 cm wide and 3 cm thick. Two pieces are cut off, equal in length to the width of the chairs, and two pieces of the same length as the finished bench will be. From these four parts, a rectangle is assembled. It is fixed to the backs of the chairs with self-tapping screws.

Another frame is assembled in the same way. Several cross bars are attached to it. This design is attached under the seat, makes the bench more reliable and plays the role of a shelf.

If the chairs are old coating then remove it with sandpaper. After that, the surface is puttied with a special compound or coated with a primer. When the layer dries, it must be sanded with fine-grained sandpaper. At the end, the structure is covered with paint.

Do-it-yourself seat for a garden bench is made from Chipboard or plywood. A rectangle is cut out of the selected material, which is larger than the base by half a centimeter on each side. Then cut out a piece foam rubber with the same dimensions. A rectangle is cut out of the upholstery fabric. It should be larger than the seat by five centimeters on each side.

Foam rubber is laid on a sheet of plywood, it is covered with a cloth on top. The fabric is fastened from the inside with furniture stapler.

The seat is attached to the base with a piano loop.

Bench-swing

To make such a bench for giving with your own hands, you should prepare the necessary materials. Start manufacturing by creating basics designs. The seat bars are attached to the back bars at a selected angle.

Along the seat install additional ribs providing rigidity.

Attached to the seat planks, drilling holes in the base bars for fastening. The same goes for the back.

Armrests are installed on both sides of the seat. They can be bolted on.

The resulting bench cover wood preservatives and varnishes. It is very important to paint over everything as carefully as possible.

The bottom of the bench is reinforced with metal profile. Chains are attached to the profile, on which the swing bench will be suspended. Be sure to check the reliability of the beams on which the bench will be suspended.

log bench

To make such a bench with your own hands from wood, you will need chainsaw. A thick log one meter long is taken as the main material.

Log mark out, to get two slightly unequal parts. The back will be made from the smaller one, and the seat from the larger one.

Chainsaw log sawed along the mark. The resulting irregularities are immediately cut off with the same saw.

The cut triangular piece is cut into pieces and inserted into the holes in the seat. The back is fixed on top. The bench is almost ready. It remains only to give it a more decorative look.

Can the seat be placed on legs. To do this, recesses are made in the lower part for installing a pair of logs as legs.

Bench-transformer

Design features of the transformer can be seen in the drawings of the bench. A do-it-yourself transformer bench is made from planed boards, which is cut to the named sizes.

In sliced lumber details holes for fasteners are drilled.

At the tabletop, boards located on the edge can be made wavy.

In material intended for countertops, drill holes with a diameter of twenty-two millimeters and a depth of three centimeters. Cuttings of the same diameter will be inserted into them.

The edges of parts and edges are processed and rounded.

The assembly of all elements is carried out with screws and screws. Screws are needed with dimensions 6x70 and 6x90, screws - 8x80.

Wooden parts stain stain.

The structural parts that will move are connected by hinges.

Between the boards of the tabletop place parts of a round cutting.

Set the stop for backs.

A do-it-yourself transformer bench is covered varnish.

rocking bench

Making an original bench with a backrest with your own hands is not difficult if you have the tools and materials. First you need to consider the drawings of the bench, which contain a small amount of detail.

The side parts according to the pattern are transferred to euro plywood three centimeters thick. They are cut with a jigsaw and the ends are processed with a grinder.

To fix the connecting strips, markings are made. Then holes are drilled. After assembling the frame, the rails are fixed with self-tapping screws. The attachment points are spatulated, and the product is completely varnished.

Bench around a tree

The simplest version of such a bench - hexagonal. The size depends on the size of the tree. Measurements are made at the height of the seat. To the result obtained, another margin of fifteen to twenty centimeters is added. If you divide the result by 1.75, you get the length of the inside.

For cutting boards ten centimeters wide are laid in four rows at intervals of one centimeter.

The cut point is marked immediately for all rows with an angle of thirty degrees. So cut out six sets of blanks.

Legs are used with a height of sixty to seventy centimeters. They are connected by crossbars by drilling holes and using bolts with nuts.

The seat is installed so that the joints are located in the center of the ribs of the legs. Screw the outer pieces first, then the inner ones. In this way, the entire hexagonal structure is assembled around the tree.

At the end, they make a back and mount an apron. The result is a circular bench with a do-it-yourself backrest.

The finished product is processed oil impregnation.

Bench made of curved branches

A bench made of curved branches will look original. For you will need branches for the front, two legs, a horizontal top and a pair of transverse branches.

Sawing branches so that they match each other as accurately as possible. Then they are connected with metal corners.

Similarly, the back is made and connected to the front.

The finished product is placed on a flat area and the seat is assembled.

Bench options

log bench which blends in well with the natural environment. It consists of half a log used for the seat, and two short round logs that are legs.
Beautiful wooden bench with a back and armrests, reminiscent of a sofa. Curved and carved elements make it more attractive, while left knots and bumps give the design a natural look.
Bench made of wood and metal. The base of the structure is metal. The wooden parts of the seat and back are fixed to it. Due to the small thickness of the metal parts, it looks light.
A bench of a simple, classical form. It is made of wooden, rather wide boards. This width allows you to comfortably sit on the bench. Armrests make the design more complete.
original bench made of wood with curly details. This option is well suited for a site with a natural rural design. Carved legs and armrests, figured back - all this gives the product originality.
Bench with an interesting back. The curved parts gradually deviate back, creating a unique design. The seat is slightly curved but has a more traditional look.
Wood complex- a table with two benches. The design looks traditional due to the material used. The original solution is to fasten all the components into a single structure.
The bench is made from solid wood. A single piece is cut out of it, combining the back and seat. The legs are attached to the bottom. The log is required quite large.
Bench with storage box for toys. Outwardly, it looks like an ordinary wooden bench-sofa, but under the seat it has a box in which you can put various things.
Comfortable wooden bench with a simple shape. The base is made in the form of a rectangular box. The back is also simple with a straight shape. The seat is padded with soft cushions for added comfort.
A wooden bench placed around a tree. It is made as if it consists of four benches, each of which has one armrest. The composition looks attractive and comfortable.
Bench of a simple form from wide boards. It looks solid, but its size is somewhat hidden by the gaps between the boards and the light blue color in which it is painted.

A garden bench is an indispensable attribute of relaxation, necessary in any summer cottage. It can be very simple (consist of one board with supports) or have an unusual shape and design, becoming part of the landscape design and decoration of the yard.

Since the construction does not require special skills, many owners prefer to do it themselves. If you also like crafting for the home and are planning to equip a recreation area in the garden or in the yard, we suggest that you familiarize yourself with how to make a bench with your own hands using improvised materials.

Types of shops

Bench for rest

The first criterion by which they differ is the possibility of their movement from place to place, that is, they are portable or stationary. There are also differences in the design of benches, on this basis, the following types are distinguished:

Bench without back. This option is easy to implement, although not the most convenient to use.
Bench with a back (folding or regular). This design is classic and is used more often than others. It is especially convenient to have a bench with a folding back that can be lowered onto the seat when it rains, thereby keeping it dry.
Circular bench. It is usually arranged in the garden under shady trees. Due to the considerable seat area, circular benches are great for a large family or a group of friends.
Decorative bench (with flower beds, from non-standard materials or an unusual shape). The best solution for decorating the site is an unusually designed bench. Another of its advantages is the possibility of using a wide variety of materials (stumps, logs, wheels from an old cart, and the like).

When deciding on the type of bench, you need to take into account its functional purpose and, in accordance with this, select the design and its location. For example, it is better to equip a bench for rest and privacy with a comfortable back and place it inside the garden or in another place that offers a beautiful view. And near the entrance to the courtyard, you can limit yourself to a simple bench without a back, it is ideal to take a break from the road or put the bags you brought on it.

Pine bench

Pine timber is an excellent material for a bench

Pine is an inexpensive, easy-to-work type of wood, which explains its popularity. Let's consider how to make a bench from a pine beam, using the example of a design with a back. Our bench will be roomy and will allow several adults to sit on it at the same time. To make it, you will need a set of tools, which includes:

electric planer;
axe;
drill;
hacksaw;
screwdriver;
saw;
roulette.

The bench will rest on two connected pieces of timber, which in turn are attached to paw-shaped legs. Ribs are stuffed onto the beams, which serve as the basis for the seat and back, and on top this frame is sheathed with a polished board.

First of all, you need to saw off two parts 1.7 m long for the beams and two more pieces of 60 cm each for the legs from the beam. Further, the beams are placed in the center of the legs and fixed with nails and special staples (they can be made independently from a wire with a cross section of 6 mm).

When the support is ready, you should cut off the blanks for the ribs, 3-4 pieces for the seat and the same amount for the back will be enough. They need to be ergonomically shaped with a hacksaw and an ax, then sanded. The ribs of the seat and back are interconnected with 120 mm nails, tightened with staples and nailed to the supports. To prolong the life of the tree, it is recommended to cover the frame with acrylic paint.

Finished construction

While the skeleton of the bench dries, we cut bars 2 m long, 10-15 cm wide and 2 cm thick for the seat and back. The blanks will need to be processed with a planer and laid on the frame, securing with self-tapping screws. It is advisable to open the surface of the wood with varnish or treat it with a water-repellent compound. The resulting bench, despite its considerable weight, can be moved to any convenient place on the site.

Fancy-shaped snag bench

After uprooting old trees, the question arises - how to dispose of the remaining stumps and snags? It turns out that it is very easy to make a shop with your own hands from such waste. Thus, you will solve several problems at once - clear the yard of debris and get original garden furniture, spending almost nothing but your free time.

Bench made of snags

Driftwood is ideal for creating benches with a back. You just need to pick up curved branches of the desired size and diameter (at least 15 cm), clean them of bark and excess knots, and then sand them. The resulting blanks are connected into a single whole with the help of nails or self-tapping screws. Then the structure must be treated with an antiseptic, varnished, and the unusual bench is ready.

Carved bench with armrests

Carved garden furniture emphasizes the good taste of the owners and creates a special atmosphere of comfort. Such benches are classic and will always look appropriate, both on the veranda and in the garden. Below we will tell you how to make a carved bench with your own hands.

The bench model under consideration is a portable structure, the feature of which is a comfortable back and armrests. Its sides will be decorated with curly cuts, the back and seat can also be covered with carved patterns.

Shop drawing with dimensions

To make a bench, you will need to prepare the following materials and tools:

boards;
PVA glue;
paint or yacht varnish;
screws;
milling machine;
drill and jigsaw;
screwdriver;
lathe.

All the details of the bench are first made of cardboard, and then, focusing on the templates, they are cut out of wood. Let's start with the sides. For them, you need to make 2 identical parts, designed to mount the seat and back, in which holes are drilled in the center using a saw thread, forming a trefoil. The sides of the parts are decorated with semicircular recesses, and their bottom is decorated with a pattern that partially repeats the shamrock. All patterns are cut with a jigsaw.

The supports that give stability to the structure are made from a bar with a thickness of at least 4 cm. The material should be processed with a milling machine and then sanded, moving clearly in the direction of the wood fibers. The edges of the supports and sidewalls should also be milled.

A thinner board is suitable for the seat and back (permissible thickness - from 2.5 cm, width - 18-20 cm). The optimal bench length for this design is approximately 1.2 m, respectively, the boards should be the same length.

Carved bench design option

To assemble the bench, you will need a proleg, as well as armrests and racks for them. The listed parts of the bench are fastened with the help of bosses located at the ends of the parts (protrusions with a diameter of 2.5 cm), by combining them with recesses on opposite fragments.

Now it remains to connect all the details, gluing them with PVA and reinforcing them with screws. Having assembled the bench, the surface is sanded with sandpaper and opened with two layers of varnish or painted.

Stationary bench from gabions

A gabion bench is a metal mesh tank filled with stones and equipped with a seat. Such structures are rare in our area, but in Europe they are already quite popular and adorn the landscapes of many sites and squares. Unusual appearance is not the only advantage of gabions, they are also easy to implement and quite inexpensive. We suggest that you familiarize yourself with the information on how to make a bench from gabions.

Gabions as the basis for a garden bench

The filling for the gabion is usually stone - sandstone, diabase, limestone and other similar species. You need to choose a specific filler depending on the desired decorative properties, for example, limestone will make a light shop, diabase will add dark gray shades, and sandstone will make it brighter (red, green, yellow). If there is no need to save money, then it is better to choose already hewn stones, since it is easier to lay them than uncut ones.

The lattice box that will hold the stones should be purchased ready-made. Usually, for such benches, a grid of durable galvanized steel is used, and its individual fragments are interconnected with special spirals (attached in the kit).

The assembly sequence is as follows:

The parts of the box are laid out on the ground in the chosen place.
The sides are connected to the bottom with spirals. This process is simple and does not require the use of additional tools.
The side parts are fastened together. For convenience, they can first be slightly screwed with wire.
Stones or other decorative material are placed inside the resulting box.
A cover is fixed on the structure with spirals.

Box assembly

So that the bench does not sag, it is advisable to strengthen the sidewalls with additional jumpers attached to hooks or put a diaphragm inside. You can screw boards to the finished box or simply put a soft seat on top.

A simple bench from an unplaned board

If the designs described above seem too complicated, or if such materials are not available, then you may be interested in how to make a bench with your own hands from an unplaned board. The model is very simple, but at the same time comfortable - a portable bench with a back.

Boards should be processed with a planer

The main material is unplaned boards, which should be pre-treated with an electric planer. The dimensions of the bench may be different, but the optimal height for it is 90 cm. Production begins with cutting out the back legs. To do this, on a workpiece of a suitable size, we draw a curly leg of a bench and cut it out with an electric jigsaw. Then we circle the first leg on the next piece of the board and cut out the second part.

The back and front legs are connected with a rectangular piece of board, the length of which is equal to the width of the bench seat. To securely fasten them, you will need to cut grooves in the details of the legs. We act as follows - we saw through several parallel, closely spaced grooves, remove all unnecessary with a chisel, so that grooves form. We place a rectangular fragment of the board in them and fix it with self-tapping screws.

We got two sidewalls that need to be connected with transverse strips (front and rear), also planted on self-tapping screws. Now it remains only to mount the seat and back boards on the frame. The design is almost ready, but it is recommended to varnish it before use, otherwise the bench may begin to deteriorate after 1-2 seasons.

Even a simple homemade bench can brighten up your yard.

Of course, novice masters are unlikely to be able to immediately complete all the work perfectly. But do not be upset if your bench is not as beautiful as in the picture. The main thing is that the design is reliable, and small flaws can always be hidden by the original design. Do not be afraid to experiment and create something new, because making a shop with your own hands means adding a special flavor and comfort to your yard, which cannot be given by the same type of factory products.