DIY crafts from plastic bottles for the garden. What can be made from a plastic bottle

If you want your dacha to be decorated at any time of the year with a bright strawberry bush, a towering stork, white daisies, and a glowing firefly in the evening, then find out how all this can be made from plastic bottles.

Broom made from plastic bottles

It will certainly come in handy on the farm. It can be used not only to sweep away trash from the hut, but also to collect fallen leaves and litter from garden paths.

To make such a durable broom, you will need:

6 plastic bottles;
scissors;
hammer;
stalk.

First of all, wash the bottles under warm water, remove the labels from them. Now cut the bottoms of five bottles and cut off the necks of four. Starting from the bottom, cut the canvas of the containers into strips 1.5 cm wide. To ensure that the broom has sufficient rigidity, stop before reaching the shoulders, as shown in the photo.

Do not cut off the neck of the fifth bottle; make a fringe on it in the same way. Now put 4 bottles on top of it. Prepare the sixth differently. Cut it below the shoulders, leaving a neck.

Place this sixth bottle on top of the five containers. Insert the stem into the neck. Now squeeze the workpieces a little so that the broom becomes flatter.

Remained finishing touch, make several holes with an awl in the working part of the panicle, insert a wire here, and secure the product to the handle. Here's how to make a broom out of plastic bottles.

How to make a stork

This is such a wonderful stork that can decorate your garden or city yard.

If you have leftover floorboards after building a house or renovating, they will come in handy. Here's what you need to prepare besides them:

plastic milk bottles;
green and red electrical tape;
self-tapping screws;
block of wood;
2 metal rods;
glue gun;
eyes for toys.

Cut off the bottom and neck of the bottles. Make four feathers from the resulting fabric. To do this, first cut the bottle on the side, then use scissors to divide the resulting canvas into rectangles. Round the bottom of each and frame the feathers with fringe, cutting the edges of the blanks.

Draw a stork template on paper or cardboard, attach it to the board, outline it, and cut it out with a jigsaw. Separately, draw the wing, also cut out 2 such parts, screw them to the stork’s body with self-tapping screws.

Leave the bird's beak unshaped for now, starting from the head, cover the body and wings of the stork with blanks from plastic bottles. Please note that the bird's head plumage is different from the bird's body plumage. Shorter pieces are made for the head.

To decorate the wings you need to make not only white, but also black feathers. You will make the latter by taking a shampoo bottle of that color. You will need the same, but long ones, when decorating the stork’s tail.

Wrap red electrical tape around the bird's beak. Glue the eyes, attach two metal rods in place of the legs. Secure their lower part to a block.

Here's how to make a stork so as not to spend extra money on buying such a garden figurine.

Decorative flower beds - idea one

Beautifully designed flower beds are a delight to the eye. Plastic bottles will also help in their creation. If you do not have a summer cottage, you can implement the idea presented below in the summer at local area in the city, on your balcony and even on your windowsill.

This container flower bed is also made from plastic containers, but in a rectangular shape. For work, prepare the following:

3-4 plastic bottles;
awl;
scissors;
glue;
white paint.

Cut off the necks and sides of two bottles, leaving the “sides”. Match the 2 containers, glue the place where they are connected as shown in the photo.

Such plastic flower beds can be based on not two, but more bottles. Then the middle elements of the flower bed are cut out without “edges”.

Now you need to make holes in the bottom of the blanks with an awl to drain excess water. If so decorative flower bed will be at home, then you need to put it on a pallet or tray.

A beautiful fence is also cut from plastic bottles. Its vertical fragments are 4 cm wide, and the height should be 5-7 cm greater than the height of the sides of the containers. The upper part of such a picket fence is pointed, the lower part is rounded.

Now cut the remaining bottles into long strips. Attach them horizontally to a vertically located picket fence and glue them. If the bottles are transparent, first paint them white or any other color, let the paint dry, and then cut out the fence elements. After that, glue it to the flower girl.

You can leave the flowerbed like this or decorate it with flowers made from plastic bottles. When filling containers, first place drainage in the form of small pebbles at the bottom, then a small layer of coarse sand, and then add fertile soil.

The second version of a flower bed made of plastic bottles

This idea will certainly appeal to lovers of classic forms. Trim the necks of two eggplants, but do not throw them away. The photo shows what shape they need to be given so that these parts turn into the legs of a mobile flower bed.

Cut out the sides of the bottles themselves, but leave along the side near the bottom and near the shoulders. Insert these parts of the two containers into one another, not forgetting to secure with glue. Use it to attach the legs.

All that remains is to cover your creation with paint, let it dry, fill it with a small layer of drainage, light soil and plant your favorite plants.

When purchasing glue, check whether it is suitable for plastic. The same applies to paint, because not every paint fits well on a given material.

Crafts for the garden

After winter there are still few bright colors in the garden. These mischievous crafts made from plastic bottles will help fill this gap. These funny little mice will become both small flower beds and garden decorations.

For this garden craft you will need:

plastic bottles;
acrylic paints;
scissors;
glue;
fishing line;
buttons;
felt-tip pen.

Lay the plastic bottle horizontally, cut out the side of it, which is now the top of the container, but don't throw it away just yet. Draw 2 ears and a tail on it.

Color the tail and body of the mouse from plastic bottle gray, and ears pink. Glue all the parts in place, use 2 dark buttons as eyes. Draw a mouth for the craft, glue pieces of fishing line onto the nose, which will become the toy’s mustache. After this, it can be used for its intended purpose.

The next flower garden for the dacha is made using almost the same principle. Also cut out the side of the bottle, ears, tail for these funny piglets, then paint them pink. When the paint is dry, fill the containers with soil and plant flowers.

There are crafts for the dacha that look good during the day, and even more spectacular at dusk, due to the fact that a neon lamp is lit inside.

Here are the materials needed for the job:

green plastic bottle;
black or green wire;
yellow paper;
gold decorative wire;
neon lamp;
scissors.

Wash the bottle with warm water and remove the label. Now cut 3 strips of wire and twist them onto the container as shown in the photo. The bottom of the wire will become the legs of the firefly, and the other parts of the wire will drape a rectangle cut out of yellow paper.

Draw wings on cardboard, cut them out and glue them onto the back of the insect. Glue 2 beads to the lid, which will become the eyes of the firefly. Twist the gold wire in the form of his antennae. Bend the neon stick so that it lights up, insert it inside the container, and secure its upper part inside the neck with tape.

Here's how to make a firefly from a plastic bottle. It will look beautiful next to ornamental plants, also made by hand.

Strawberries and flowers from plastic bottles

These are the beautiful daisies you can get by using empty containers for dairy products. Of course, first you need to wash them well and remove the labels. To make one flower, place in front of you:

3 white plastic bottles;
cover;
scissors;
wire;
felt-tip pen.

Cut off the lower parts from the containers; we won’t need them when making flowers from plastic bottles.

Leave the neck on one bottle and cut it off the other two.

Lid orange color Perfect as a flower center. It will only be necessary to erase the numbers indicating the production and expiration date of the product. This can be easily done using acetone or paint thinner.

Now make 8 petals on each blank. To make them the same, use a stencil or first outline them with a felt-tip pen and then cut them out. It will also need to be erased later. Place the second one on the first blank, on which the neck is preserved, then the third. Pre-drive the petals so that the flower is voluminous. Close the lid.

Using a drill or a hot nail, make 2 holes in the lid, thread a soft wire through them, and wind it onto a hard one, which will become the stem of the plant. You can wrap it with green electrical tape or paint it that color. All that remains is to cut out and attach leaves from a green bottle to the trunk, make 2 more daisies, and your handmade flowers are ready.

Such bright juicy berries will also be a wonderful decoration for your garden at any time of the year.

Making this strawberry bush is extremely simple. The bottom is cut off from the bottle and set aside. The middle part of the container is not useful; it and the neck need to be cut off and thrown away. But insert the remaining fragment from the neck to the bottom of the shoulders into the bottom of the container. Also make 2 more berries or as many as you wish to create.

Now these blanks need to be painted red, and when this tone dries, make dots of white or dark color.

A sepal is cut out of a green bottle and placed into the recesses of the berry. In his and her center, you need to make a hole with a drill or using a nail and a hammer, align them and thread the wire. On the other side, leaves cut from a green plastic bottle are put on it. Below the wires are connected and the lower edge is stuck into the ground. As a result, what a wonderful garden craft you will get!

There are others interesting ideas for the dacha. From the video you will learn what other flowers you can make from plastic bottles:

This video shows how to make bees from small plastic bottles:

The next master class will teach you how to create country figurines of storks from the same material:

Plastic bottles are an inexpensive and accessible material from which you can make many unique and original things that can not only decorate your garden or yard, but also bring practical benefits. At the same time, you do not need to have plumbing or construction skills, nor do you need to buy expensive tools and equipment. The instructions below will help you implement the most unusual ideas.

Flowers from polymer containers

You can start the creative process of decorating your suburban area by making flowers from plastic bottles for the garden. This will not require much effort from you, and the result will exceed your wildest expectations. Once you get the hang of it, you can make more than just one flower, but an original and unusual flower bed that will delight the eyes of all the inhabitants of the dacha and its guests.

Before starting work, you need to prepare the following materials:

The required number of polymer containers. Garden crafts made from plastic bottles of the same size and shape will not look very attractive, so it is advisable to diversify the raw materials. Remember, the larger the bottle, the larger the flower corollas will be.
Acrylic paint. It is used for coloring plastic, therefore, before purchasing, you must check the instruction manual and make sure that the selected composition is suitable for application to a plastic surface.

Advice!
If your bottle garden is “grown” from already painted containers, you do not need to buy paint and apply it to the parts, which will speed up the manufacturing process and reduce its labor intensity.

Further work is carried out in the following sequence:

Bottles need to have their necks cut off. There is no need to remove a large amount of plastic, just separate the cork itself and the hangers. The rest of the container will go to the petals and corolla.
Using a garden knife or stationery scissors, cut petals from the bottle suitable size and shapes. Do not separate them from the bottom of the bottle, since the latter will protrude from the middle of the bud to which the “stem” is attached.

To give the petals a more natural shape, they can be rounded. A knife or metal rod heated with a blowtorch or gas burner will help with this. The first crafts made from plastic bottles for the garden are unlikely to be ideal, however, as you gain experience, your products will look better and better.

You can also make a multi-layered flower. To do this, a second one, cut in a similar way, is attached to the first part using an awl and wire.
The last stage is attaching the stem. The material for it will be a metal rod, wooden stick, strong wire and so on.
You can decorate the flower stem as follows:

cut a ribbon from another container with which to wrap the stem, then secure it by melting both ends;
wrap a green hemp rope around a rod or stick and glue it with PVA glue.

Note!
Crafts from plastic bottles for a garden they do not have to be large and tall.
Low small flowers also look attractive.
It is only necessary to organically fit them into the landscape.

Useful devices

Do-it-yourself garden crafts made from plastic bottles can bring not only aesthetic pleasure, but also perform many useful functions. The scope of their application is limited only by your imagination.

Solar water heater

If you have not yet installed an electric or gas heater, a solar collector will help ensure that the water in the shower is heated to a comfortable temperature.

Like other crafts made from plastic bottles for the garden, this device is made from polymer containers without the use of complex and expensive equipment. Price hot water in this case it will be equal to zero, which, among other things, will help you save on utility bills.

So, to construct the collector you will need the following materials:

plastic bottles with a capacity of 2 liters;
empty milk cartons;
polymer pipes diameter 100 and 20 mm;
accessories for plastic pipes(tees, corners and plugs);
glue for joining plastic parts;
matte black paint;
sandpaper;
duct tape;
paint brush;
wood hacksaw;
mallet.

For ease of presentation, it is advisable to divide the manufacturing process itself into several stages:

The bottom of plastic bottles is cut off, after which they are inserted into each other in pairs and glued together. It is necessary to ensure that the seam is sealed.
The frame is assembled from pipes. Parts with a diameter of 100 mm are needed to form the frame, and smaller ones (20 mm) are suitable for connecting bottles together into a common network. Use fittings in the right places.
The entire collector is mounted on a sheet of plywood, covered with black milk bags on top. The pipes are also painted the same color. This will help increase the heat-absorbing characteristics of the parts and increase the operating efficiency of the entire device.
Ready design must be installed on the roof of the house or its southern wall. The collector must be mounted at an angle to receive maximum ultraviolet rays.

According to the inventor, the collector panel, with an area of 1 sq. m. effectively heats enough water to wash one person.

Growing plants

What else garden crafts can making your own from plastic bottles be beneficial? Naturally those that help in growing plants. It's about about containers for seedlings, as well as devices that help water the lawn and garden in the summer.

Making both the first and second products is not particularly difficult. All you have to do is cut off the neck of the bottles and make holes for drainage or water dispersion.

If you paint a pot or diffuser acrylic paints, you will receive a garden decoration made from plastic bottles that will also carry a payload.

Buildings and constructions

House

Immediately after purchasing a country house land plot, any summer resident wants to build a home there to shelter from bad weather, store tools and simply relax after hard work in the garden.

Therefore, when talking about what kind of garden crafts you can make from bottles with your own hands, it would be useful to mention the possibility of building a temporary (and perhaps permanent) residential house from them.

Before replacing traditional bricks or cinder block with polymer containers, check out the following tips:

Bottles need filling river sand. This will increase their strength and reduce the thermal conductivity coefficient.
It is recommended to lay a reinforcing metal mesh between adjacent rows, which will further strengthen the finished structure.
Cement mortar does not stick to plastic, therefore, many holes must be made in each bottle, which will allow the mounting mixture to interact with the sand located inside the container.
During laying, it is advisable to secure the necks of the bottles with twine or wire until the solution completely hardens. This will prevent the wall being built from spreading.

Note!
The polymer from which the bottles are made loses its properties over time from exposure to unfavorable conditions environment.
Therefore, do not expect that your house will last more than 5-10 years.

Other elements of the building can be made from the material in question:

Roof tiles. To do this, plastic bottles need to be heated in the sun so that the polymer softens a little, and then compressed using a steel or wooden sheet with a load placed on top.
Slate. It's even easier to make. You need to remove the neck and bottom of the bottle, and then cut it lengthwise into two parts. You can fasten the resulting elements together using adhesive compositions. You just need to carefully monitor the tightness, otherwise your roof will leak.

Gazebos and greenhouses

However, these are not all ideas for a garden made of plastic bottles. After all, this material can be used to construct a gazebo or greenhouse, replacing expensive polycarbonate or fragile glass. The polyvinyl chloride from which the containers are cast has similar consumer properties.

The work on making a gazebo is carried out as follows:

Using wooden beams, metal corners or polymer pipes, you need to make the frame of the future structure.
Using a drill, awl or a hot knitting needle, holes should be made in the bottom of each part. Then all the bottles are strung on a fishing line or twine, the length of which is slightly greater than the height or width of the frame.
The resulting bunches are fixed both along and across the frame. The layers must be additionally tied together with wire to reduce the vibrations of the bottles in windy weather.
Make attractive appearance You can use containers of various colors and sizes, creating a beautiful ornament from them.

A pergola and a greenhouse are built in the same way as a gazebo, so there is no need to describe this process in detail.

Parking space

Few motorists like it when their “iron friend” is standing under the scorching rays of the sun, rain or snow. Therefore, many people build carports using corrugated sheets or polycarbonate for this purpose.

However, a regular plastic bottle will work just fine. The resulting structure will not cost you much, and with some imagination you can make a canopy that will serve as one of the decorations of your summer cottage.

The work should be done like this:

a hole is made in the bottom or cap of the bottle, after which a fishing line, twine or wire is fixed there;
then the resulting blanks are attached to the frame, forming dense rows;
to prevent the protective coating from being too mobile, the bottles can be additionally cross-linked;
To protect the parts from sunlight, it is advisable to paint them with acrylic paint before installation.

Conclusion

Garden crafts from bottles are not only a way to save on the purchase of certain devices or decorations. With their help, you can show your creative inclinations and emphasize your individuality.

You can get even more ideas and ways to implement them by watching the video in this article.

Trend rational use household waste in Lately is becoming increasingly popular, especially for plastic containers. You can make almost everything from plastic bottles with your own hands. country house interior and not only. One of the main advantages of this material is its long service life, and it is also very elastic. Don’t forget that plastic bottles are an affordable material that every owner or housewife always has in stock.

Cheap and cheerful - we make flower beds from bottles

Plastic containers are ideal option for, since it has a great advantage over wood and even metal. Wooden fencing in flower beds or flower beds dries out over time or rots under the influence of moisture and sun. Even metal curbs are susceptible to corrosion and require periodic maintenance, such as regular painting.

What about plastic? It does not lose its shape and does not collapse for a long time. This means that such a flower bed will last for more than one season or even one year, and it also requires absolutely no maintenance. Even if a “breakdown” occurs, the required “element” can always be found in the pantry and easily replaced, without resorting to long, tedious shopping trips to find a suitable fragment.

So, what can you make from plastic bottles with your own hands?

Bottle borders

If you need to fence a flower garden, plastic containers of different sizes will do the job perfectly. This will not only limit the space and prevent the growth of perennial plants, but will also retain moisture and prevent the appearance of weeds.

The shape and size of the flowerbed depend only on the imagination of the summer resident: it can be either equilateral or in the form of some kind of animal or plant. You can also use bottles to break the flowerbed itself into segments.

Even a child can build a bottle border (with the help of adults, of course):

The first step is to draw the contours of the flower bed with a sharp object or sprinkle sand on the site.
Remove the labels from the bottles, wash them, pour sand into them and screw on the cap. If this is not available, you can use ordinary soil or water. This is necessary for stability, since empty containers will quickly fall out of the fence.
Dig a groove along the outlined contour so that the bottle can be deepened into it by about 1/3.
Place the filled bottles in the groove with the neck down, as close to each other as possible, and cover with soil.

For visual effect, you can use bottles from different color plastic (green, white, brown).

Some summer residents do without digging in bottles. For example, bottles without a bottom are simply inserted into each other, forming a circle. The finished structure can be “put on” or taken into a ring around the trunk of a tree. To secure the curb, it must be pressed tightly to the ground with arcs.

Multi-tiered flower bed

If you really want to have a flower garden, but there is too little space, you can make it yourself from plastic bottles. The principle is the same as when constructing a border, only after laying the first tier it is necessary to fill it with nutritious soil, and only then lay out the next floor.

When planting plants for the lower tier, it is better to choose moisture-loving specimens, since when watering the water will flow down.

Mini flower beds

Beautiful and useful crafts for a summer residence, you can make it from 5-liter plastic bottles. They will serve as miniature and cute flower beds, for example, in the shape of everyone’s favorite piglets.

Group compositions in the form of trains with flowers look no less impressive.

And if instead of flowers you sow lawn grass, a large bottle turns into a cute hedgehog with green spines. All that remains is to attach the eyes and nose.

Those who are not afraid of small rodents will like cute mice from small (liter) bottles. They are good for planting petunias.

Flower pots and flowerpots

With a little imagination, plastic bottles can easily be transformed into small ones. decorative pots under flowers or spicy greens. You can make them even or cut them to fit a marker in the shape of a face. Such flowerpots will look great not only in garden gazebo, but also in the house on the windowsill.

But if you put a fabric cover on the cut bottle and attach ropes, you will get elegant flowerpots for the summer veranda.

The easiest way to make hanging pots is to cut out fragments of the walls on both sides of the bottle, and secure a rope under the neck for hanging. Compact, low-growing plants can be planted in such flowerpots.

Making a beautiful garden path

Paths made from plastic containers are especially popular among summer residents. The strength of such a path depends on the laying method and what part of the plastic container serves as building material:

Paths made of plastic bottles become very slippery in winter.

Fun playground - decorating a place for children to play

Caring parents always strive to provide their children with a place to play in their dacha, where the children can while away the time while the adults are busy in the garden. Of course, it should not only be safe, but also colorful so that the kids will like it. With the help of plastic bottles it is easy to decorate the playground by making a variety of plants and animals. Regular paint will help give them brightness.

In the shade under a palm tree

What is a children's playground without a sandbox? And where there is sand, a palm tree must “grow”. For Tropicana you will need bottles of green and Brown for the trunk and leaves, respectively.

Before you begin assembly, you need to make sure you have a solid base. For example, fix a metal pin in a concrete screed, and it should be quite long so that the tree becomes tall and children can walk freely under it.

When the base is fixed, you can start “growing” the palm tree:

cut off half the bottle (the top and neck are not needed) and form a jagged edge;
Make a hole in the center of the bottom, string the blanks onto the base pin, bending the teeth to the side for a more natural look;
cut off the bottom of the green bottle and make straight cuts along the entire contour to the place where the wall meets the neck (if desired, the branches can be made into shapes - cut into 4 parts and make teeth on each one);
string fragments of the branch onto the base;
firmly attach the finished branches to the top of the stem (by welding or construction cords).

If after assembling the palm tree there are still a lot of green bottles left, you can use them to make a small (or large) Christmas tree. Remove the bottom of the bottle and cut it into long narrow strips right up to the neck. Trim the edges of the strips to resemble thorns. String the leaves onto the base.

Such a Christmas tree will look great on the site in winter, especially under the snow, and will also help out in New Year's Eve those who, in a hurry, did not have time to buy a living tree.

Guests from a fairy tale - funny animals

And of course, there must be toys. Children often take their old favorites outside. With the help of plastic bottles, you can easily diversify the “zoo”, creating real masterpieces - from the fairy-tale Frog Princess and Goldfish to modern cartoon characters.

Take, for example, a handsome cat, painted with black and white paint. Or you can use brown beer bottles and you will get a brown cat, also beautiful.

Form a head from two bottle bottoms (connect them), and the curves on the bottoms will indeed look like a real head. On one of them, paint eyes, eyebrows and mustaches with white paint, and a neat tongue with red paint. Insert small cut out ears on top. For the body, string the same short-cut bottoms onto the base, closing the body last. Melt the edges of the bottoms. Apply white paint along the melted contour of the ears and body fragments, and make a white spot on the chest on the front bottom.

Glue the head and legs - the top parts of bottles with elongated necks will be useful for them. Cut them to the place where the bottle expands, cut the edges with sharp teeth and build legs from 4-5 parts, putting them on the base wire. Screw the plugs onto the upper necks and use them to glue the legs to the body. For the tail, take a long wire and string the narrowest parts of the neck onto it, but without the plugs. To make the tail fluffy, cut the edges into thin strips.

Beautiful animals are also obtained from large 5-liter containers. With the right combination of bottles of different sizes and with the help of bright colors, you can place a zebra, horse, cow, donkey and even a giraffe on the site.

Flowers for my daughter

In the sandbox, children not only make Easter cakes. Little girls love flowers very much and often collect dandelions on the lawn (or in their mother’s flowerbed) to plant them in their sand garden. But you can make a whole greenhouse of flowers from bottles, and little girls will be happy to take part in making the most simple options. Chamomiles, cornflowers and tulips will decorate the sandbox, especially since young flower growers will be able to repeatedly “transplant” them from bed to bed without harm to the plants or mother’s nerves.

For flowers you will need:

wire for the stem;
straight parts of bottles for cutting leaves out of them;
necks or bottoms for the inflorescences themselves;
dye.

Adults can make more complex versions. Plastic roses or poppies will decorate not only the playground, but also the flower bed.

Plastic design for garden

Plastic bottles have a wide range of applications. So, if small animals and birds look appropriate in flower beds and playgrounds, then larger animals can be placed in the garden, among trees and shrubs. They will give the garden a unique look and enliven it.

Amazing garden sculptures

Representatives of large birds made of plastic look almost alive. Using multi-colored paints you can achieve a stunning realistic effect. To make them, you just need to master the technique of cutting feathers from the sides of bottles and prepare a frame on which they will be attached.

The following will look very impressive in the garden:

In the garden you can place sculptures of not only birds, but also animals of a large enough size so that they do not get lost against the background of tall trees.

Among the greenery, a bright spot will be a white sheep, which is quite easy to make if you have 2 liter bottles and several 1.5 liter bottles lying around in the pantry:

Cut the necks of two 2 liter bottles and put them on top of each other - this will be an elongated head. Cut from the third bottle long ears, roll them up a little into a tube and attach them to the head in appropriate places with wire (or glue). You can draw eyes or glue two corks.
For the body, insert the whole bottle with the neck inside into the cut-off top. Make 3 more such blanks and attach them to the first one on the sides and top, thus giving the sheep the desired “waist” volume.
The neck will be a whole two-liter bottle, which should be attached to the body at an angle of approximately 120 degrees so that the cork is on top.
Place the head to the neck (on the plug).
For the legs, cut off the top of a two-liter bottle and insert a whole bottle of a smaller volume (1.5 l) into it. Make three more such blanks and attach the legs to the body with the wide part up.
From the cut bottoms of two liter bottles make a fleece, fastening them together, and put it on the body. Grip the edges of the fur coat under your belly.
Paint the sheep with white paint and draw black eyes.

Caring for birds

Plastic bottles can be used not only for decorative purposes, but also for the benefit of the garden. After all, it is always inhabited by the summer resident’s little helpers - various birds that collect pests from the trees. In the warm summer they have something to eat, but in winter it becomes more difficult to get food. That’s when the feeders hanging around the garden will come in handy. And if you involve children in the process, you get a double benefit: the children get an interesting activity and pleasure, and the birds get a cozy house with grains.

The simplest ones can be made from large 5 liter plastic bottles by simply cutting large arch-shaped holes on both sides.

To prevent birds from injuring their paws on the sharp edges of the bottle, they must first be melted or covered with electrical tape.

For those who rarely visit their summer cottage in winter, a feeder that fills automatically will come in handy.

You can make it from a bottle and two wooden spoons:

make two holes in the bottle opposite each other, with the second one located slightly lower;
unwrap the bottle and reverse side repeat the procedure;
insert the spoons crosswise into the holes.

After the bottle is filled with food, it will be poured through the holes into the spoons as they are emptied.

A cozy place to relax using improvised means

Not only birds, but also the owners themselves should have their own secluded corner among the greenery, where on warm summer evenings you can happily drink a cup of tea, inhaling the aromas of nature. Many people prefer to place it in the garden. They are very beautiful, you can’t argue with that, but they require certain financial investments. But it’s cheap and cheerful to make from plastic not only a recreation area, but also to completely equip it.

Alcove? Easily!

A gazebo is one of the largest-scale garden crafts made from plastic bottles. But a plastic gazebo has two big advantages:

it is easy to assemble;
will last for more than one year without damaging the material.

Perhaps the only drawback of the building is the presence large quantity bottles that need to be stored somewhere during the collection process.

What the gazebo will look like depends only on the desire of the owner, and, accordingly, on the availability of “building materials”:

Practical curtains for the gazebo

IN summer gazebos there is a lot of fresh air, but, unfortunately, also dust. Ordinary tulle requires frequent washing, while a plastic curtain does not collect as much dust, and you can “wash” it without even removing it - just spray it with water from a hose (of course, if such a curtain is not hanging in the house).

For dreamy and romantic housewives, delicate curtains made from the bottoms of plastic bottles strung on a base are suitable.

Energetic people who love bright colors are more suitable for cork curtains assembled according to the same principle.

garden furniture

A table, ottoman, armchair and even a sofa in a gazebo can also be made from plastic bottles. The old one from the house is also quite suitable for relaxing on fresh air, but like the curtains, it will eventually become a collection of dust. In addition, take out wooden sofa It is quite difficult to go outside, because such furniture is quite bulky and heavy. But rearrange plastic chair won't be difficult.

Assembling the furniture is not difficult - the bottles just need to be placed tightly and connected together with tape, giving the required form. For ottomans, knitting or sewing a cape - no one from the outside will guess what they are actually made of.

Leatherette covers are more suitable for a sofa.

Unbreakable chandeliers for the garden

If you are planning an evening tea party, you should definitely go to the gazebo. To decorate the light bulb, you can cut the bottle into two parts and make a simple lampshade from the upper half and paint it or cover it with colored thread.

In plastic chandeliers, it is better to use energy-efficient light bulbs - they do not heat up so much and will not melt the material.

In more complex versions, chandeliers are assembled from fragments of leaves or flowers cut from multi-colored bottles.

Gardening supplies for gardening

To country cottage area looked beautiful and neat, it needs to be looked after all the time - weeding, collecting fallen leaves and small debris. To do this you will need tools. Of course, you won’t be able to make a hoe or rake out of plastic, but simpler ones are quite possible.

Craftsmen have long known how to use plastic bottles to benefit themselves and save the family budget. After all, if the scoop suddenly breaks, you no longer have to run to the store for a new one. From household waste, which is found in every home, a lot of useful things are obtained at no extra cost:

Garden cares

From plastic bottles you can make useful things not only for the garden, but also for the vegetable garden. These can be either small crafts in the form of, or larger-scale structures such as greenhouses.

Greenhouses for seedlings

Most summer residents grow seedlings of garden crops on their own. Some do this in apartment conditions, but more quality seedlings They are obtained from greenhouses - there is enough heat and light there.

We can’t even talk about cost, but as for durability, plastic bottles will certainly last longer than film shelters or glass structures.

To increase the service life of greenhouses made from plastic bottles, it is advisable to place them on a foundation and use a metal profile for the frame.

The simplest version of a greenhouse involves constructing walls from whole bottles that are placed on top of each other.

It will take a little longer to tinker with a greenhouse made of plates, but it will turn out warmer. In this case, you need to cut out even parts from the bottles and fasten (sew) them together in the form of a canvas. Use ready-made canvases to assemble a greenhouse.

Watering "systems"

For gardeners, watering is no less pressing issue than having a greenhouse. Instead of ready-made watering systems in the garden, you can use. They must either be hung above the bush, having previously made holes in the lower part, or dug into the ground.

In addition, the bottle makes a good sprinkler - you just need to make small holes in it and connect it to a watering hose.

Getting rid of pests

A repeller made from a plastic bottle will help drive away the gardener’s worst enemy, the gardener, from the property. He not only plows up the beds, digging his tunnels, but also damages them in the process root system plants, depriving gardeners of the future harvest.

If you cut the side walls of the bottle, bend them and put the container on a steel rod, when there is a gust of wind, the bottle will spin and make noise. The sound will go into the ground through the rod and deprive the mole of the desire to manage in this noisy place.

The list of things you can make from a plastic bottle with your own hands is quite long. These are just a few crafts that make life easier for summer residents. Agree – it’s better to get the most out of bottles than to pollute the environment. Take care of nature and work with pleasure!

21 ideas for using plastic bottles - video

Handmade is popular in any form, be it a gift to friends or a joint creation with a child. Bottles of water, carbonated drinks, milk and juices are an excellent base for crafts. The material is easy to process, durable, and not afraid of precipitation, which is why it is so loved craftsmen and famous designers.

It’s easy to see this by looking at the photos of crafts made from plastic bottles. The ideas implemented on them are easy to repeat yourself, or they will become Starting point to create new masterpieces in the interior or garden.

What to prepare for work

An important advantage of handmade objects is that any material available on the farm can be used for crafts. Plastic containers for drinks are a universal “raw material”.

In action are:

whole bottles of any size, including canisters;
separately necks or figured bottoms:
main smooth part;
covers.

The advantage of the material is its ease of processing. Blanks can be:

pierce with a knife, awl, clamp needle
heat until the plastic takes the desired shape and hardens
cut with scissors or a stationery knife

For decoration, depending on the idea, you will need paints, remnants of thread, scraps of fabric, natural material (cones, twigs), artificial flowers, leaves. There is a use for old children's toys, broken garden tools, ribbons, foam rubber, and wrapping paper.

Schemes for crafts made from plastic bottles are easy to find on the Internet, but if you lay out the existing bottles and various waste materials in front of you, ideas will arise by themselves.

Big possibilities in a small bottle

No complicated tools or special skills are required. But as a result you can get:

real animals and fictional animals;
organizers for storing small items, stationery, garden supplies;
figurines of people, animated characters, fairy-tale heroes;
flowers and various floral arrangements;
flower pots and flowerpots for indoor and outdoor plants;
bird feeders;
decorative details for interior or landscape design.

Original ideas for bottle crafts do not necessarily involve cutting the container. As a result of simple manipulations with loosened soil and multi-colored paint, you can build:

a low figured hedge or frame for flower beds,
flat silhouette of a flower, insect, animal;
smiley

In this case, the bottles are simply sunk into the ground to the desired depth, and the protruding parts are tinted in the selected color.

A beautiful vegetable garden without much hassle

It will not be difficult to buy in the store garden figurine any subject. The same goes for flowerpots, decor for a recreation area or flower garden. But similar things made with your own hands look no less impressive. Crafts from plastic bottles for the garden can be made in the winter, so that at the beginning of the season you can install them in places of honor in the country house.

Artificial pond

1.5 liter bottles are painted in Blue colour by 1/3 of the length, starting from the bottom. Then they are pressed into the loose soil close to each other. There is no need to create perfectly even outlines. Let the artificial lake have an irregular shape.

You can line the edges with large stones, and install figures of waterfowl or water lilies “on the water.” Plants, by the way, can also be made from plastic containers.

Engine

Shape of 5 liter cans drinking water resembles train carriages. You will need whole bottles with necks and soft plastic lids for homemade preparations. In the lids and sides of the bottles, two protocols are made from the bottom of the canister. The holes are located closer to the beginning and end of the workpiece on both sides. Then, using flexible wire, the “wheels” are attached to the locomotive and carriages. Now the composition can be painted.

The neck of a soda bottle looks like a pipe and can be inserted into the hole on the nose of the locomotive. If you cut rectangular holes on top of the cars along the perimeter of the bottle and pour soil inside, then the train turns into pots for climbing and short plants.

Hares, pigs, and elephants

Cut off the top of a large round canister and you will get the body of an animal, on which even an incompetent artist can depict a muzzle and paws. You can cut long and thin ears from another bottle and insert them into the slots closer to the edge of the bottle. You will get a recognizable bunny.

Ears are round and small size– for a bear cub, huge and wide ears – suitable for an elephant. If you place the canister horizontally, leaving the spout with a lid, then the small sharp ears and pink color will help turn the bottle into a perky pig. The crochet tail is made from a small bottle cut in a circle.

Excellent crafts are created from trimmed to required height plastic containers. If you make holes on the sides and insert wire or twine as a handle, you will get a convenient basket for collecting berries.

It can be painted, covered (tied) with colored ribbons or twine, and artificial flowers can be added. You can decorate the necklace with an old lace napkin or create a pattern from coffee beans.

1000 ideas for 1000 things

A detailed description of crafts made from bottles for novice designers can be continued with organizers that are necessary in any home.

Supporters of minimalism will appreciate the prefabricated composition of bottles with cut-off necks, varying in height and volume. They can be fastened together using wire, stretching it at the puncture sites and tightly twisting it into a flagellum inside the containers. Multi-colored caps, beads, appliqués made of fabric or self-adhesive paper will help to cover the fastening points.

Hanging organizers are indispensable in the bathroom, home workshop, garage, or craft corner. You can make a rigid mount by cutting a hook or loop from part of the bottle so that it is one piece. Or choose an option with fastening on a rope or wire, similar to the principle of a bow on a bucket.

Figured baskets. It is easy to arrange soft plastic in the form of a basket. Then you can store, for example, cosmetics in it. It would be appropriate to make a spice box for the kitchen, and if you line the bottom of the box with thick foam rubber, then rings and stud earrings will look original in it. The edges of such baskets can be wavy, smooth, or jagged.

Another idea for filling - floral sponge. You can fix artificial buds in it or create a composition of fresh flowers.

And can apple trees bloom on Mars?

A master class on crafts made from plastic bottles would be incomplete if we ignore the plants created from them. An exotic palm tree can easily grow in your home or garden, even if you live in middle lane Russia.

For flower arrangements you can do:

Inflorescences from figured bottoms. It is enough to paint them with bright colors and install them on a rigid “stem” made of wire. The leaves can be made from green bottles.

Exotic buds. From the soft plastic center you need to cut four-pointed holly blanks of different sizes. They can be connected in pairs, combining parts of different shades, but from the same color range. Each detail needs to be slightly shifted relative to each other, creating volume by bending the petals towards the center or towards the bottom of the bud.

Prefabricated flowers. Round-shaped petals are prepared in advance and slightly melted over a candle flame. Through the holes made at the bottom of the petals, the bud is collected onto a flexible wire.

Fairy lights. The easiest way to assemble them is from multi-colored bottoms from bottles with a volume of 0.5 to 1.5 liters. You can string the buds horizontally or create vertically flowering vines. They can block the entrance to the gazebo or hang from trees in the garden.

Leaves are cut small and round, tall and thin, like sedge, or with soft curves, like in nature. The latter option is easily obtained from wave-cut strips, lightly scorched over a candle fire.

Bonus ideas

Before you enthusiastically engage in creativity, you can familiarize yourself with a small kaleidoscope of ideas available for implementation:

mosaic on garden path or a gazebo wall made of plastic covers;
a corrugated pipe or hose from an old vacuum cleaner as the trunk of an elephant, the neck of birds, a giraffe, the legs of animals (a rigid wire frame is inserted inside to give the desired bends);
bottoms of multi-colored bottles instead of mini-shades for garlands;
canisters for rinse aids and others detergents to create fancy figures, funny faces;
a bottle as a sprinkler (pierced with a thin needle and put on a garden hose) or an automatic watering container.

It’s not difficult to see that a plastic bottle is an inexhaustible source of ideas for creating useful little things. For more instructions on how to make a craft with your own hands, watch our video.

Create, please others and enjoy the process of creation yourself. Remember that by giving bottles and canisters a second life, you make the world cleaner and brighter!

Photos of crafts made from plastic bottles

Interest in DIY crafts from plastic bottles, probably will never disappear, because an incredible amount of them accumulates in the house. And besides, if you really want to do something creative, keep your children occupied during the holidays or vacation at the dacha, or do something cheap and practical, then best material than PET containers are hard to imagine.

That is why today you will find another, but very interesting selection of the best ones that are suitable for all the tasks mentioned above.

DIY crafts from plastic bottles photo

Of course, there is no ranking of the best, simplest works, because everyone has their own requirements both for the master class and for the finished result. For many, the result is not as important as the creative process itself, but for others, useful and practical DIY crafts from plastic bottles, photo which you can see in our article, will serve for a long time and will become excellent helpers on the farm.

So we can conditionally divide all the options into useful, decorative and mixed works, that is, those that also perform a practical function, but at the same time, say, decorate the interior (carved).

For example, such works include original pendants and lampshades for lamps, photographs of which you can see above. They are created from many top parts of the container, that is, before doing the work, you will only need to cut off the top third and leave the bottom for some other work.

Methods for decorating pendants can be different - it can be applique with fabric, ropes, laces, stones, the surface can be painted both inside and outside with paints, and can be perforated with interesting patterns.

Before you is the process of performing such DIY crafts from plastic bottles step by step, which results in a wonderful lampshade for a small lamp (of course, it should be LED lamp which does not heat up or heat up surrounding objects like an incandescent lamp, which could cause a fire). We cut off the upper part and leave the lower part to create.

Try to process the edges using a hot surface so that they are not sharp, or when gluing the cord, wrap it behind the back of the plastic. In our example, the craft is made using a technique similar to papier-mâché, when tape or polyethylene is glued to a plastic surface specifically so that the lace does not stick to it.

The lace is well impregnated with PVA during the process, so when the glue dries, you can simply remove the bottle from the inside and only the rope frame will remain. But if this technique is too complicated for you, then leave the bottle inside, just decorate it with paint or another layer of rope.

This way you can create magnificent New Year's decorations if you leave transparent plastic inside, and treat the top and bottom with hemp, inserting a small Christmas decoration. in the same style can become a pretty vase or interior decoration in oriental style, it all depends on your imagination and on the interior of the room where you are going to hang your new homemade decor.

There is nothing more beautiful than, but only on the condition that these flowers are made carefully, in interesting technology, using several shades of plastic, as in the master class presented to you above. And, on the contrary, there is nothing worse than terrible and clumsy flowers, for example, from a cut bottom, somehow painted with paint. There is no beauty or aesthetics in such decor; even a summer cottage is not recommended for anyone to decorate in this way.

Dacha do-it-yourself crafts from plastic bottles

A real treasure trove interesting tips always concerns decoration do-it-yourself dachas. Crafts from plastic bottles always help us make country life a little more beautiful, more convenient, and more practical. And for families with children, these are a great way to both keep the kids busy for a while and entertain them with ready-made garden decor.

For quite a long time, empty containers have been used as containers for seedlings or as small pots (plant pots) for flowers, herbs, and salads. All this can be organized so beautifully that you get both country decor and useful system storing fresh herbs for the kitchen, cooking.

Just such examples are shown in the photo, and it works Golden Rule, that if the plants are beautiful in themselves, have lush, elegant greenery and bright flowers, then the bottles can not be decorated at all or the decorations can be minimal. On the other hand, if you grow kitchen herbs, such as parsley or watercress, right in the summer kitchen, then a great idea would be to decorate such pots, make decoupage or other types of applique for them.

Attracting birds to your site using feeders is great idea, both for winter and summer. Many people simply don’t think about how many pests an average sparrow or starling can eat in one summer season. Moreover, the more grain and seeds the birds have at their disposal, the less attention they will pay to valuable cherries. You have options DIY garden crafts from plastic bottles- not only cute feeders, but also a drinking bowl, which is also very necessary for a comfortable stay for birds in your garden.

They may be valuable for their decorative value, but useful things created using ordinary plastic in the country are no less needed.

We present to your attention an interesting broom for outdoor cleaning, because, as any summer resident knows, in suburban conditions any broom or broom wears out at cosmic speed, especially if you need to remove fallen leaves or fruits. To get a broom, you need to assemble a structure from a long stick and a cross board, the initial blank will resemble a mop.

Using self-tapping screws, several lids are attached to the horizontal board, as shown in the photo, into which the necks can be screwed. The containers themselves are cut into strips using scissors or a cutter, first cutting off the bottom. Try not to make the strips too thin, otherwise the broom will ultimately work worse; you need all the “twigs” to retain their elasticity.

DIY children's crafts from plastic bottles

Entertainment or creation interesting decor– ideal DIY children's crafts from plastic bottles must combine both of these concepts. It would not be very pleasant if, as a result of painstaking and exciting work, you ended up with something not very beautiful. Therefore, when choosing among a variety of ideas, pay attention not only to the ease of implementation, but also to the end result, which must definitely find its place in the nursery.

For example, such a place can very easily be found by a stand for pencils and pens, made in the shape of a space monster, not at all scary, but very funny.

To work, you will need a suitable container, preferably already painted, so that you do not have to use additional paint from a spray can, as well as paper for applying the applique - face, hands, teeth, and so on. For more delicate natures, pencil cases with images of cats are suitable, which are also quite simple to make; the faces are not glued on, but carefully drawn with markers of different colors.

DIY crafts from plastic bottle caps

If the rest of the material has already gone to beautiful, then we suggest you use absolutely all the spare parts and make DIY crafts from plastic bottle caps, intended for children. It is the lids that accumulate a lot in the household, thanks to their durability, good shape and variety of colors, they can be very easily used as educational toys, items for appliques and even for didactic material, helping children's development.

The photo shows options for games that you can organize with or for children using multi-colored plastic covers. Worthy of attention is the option of turning the caps into chips for playing tic-tac-toe.

And if you insert small magnets from the back inside the lids and secure them with glue, you will be able to play not only on a specially drawn field, but also on any iron plate or refrigerator.

Animal toys, created on the basis of lids, will help you make a home puppet theater; with their help, you can easily tell any fairy tale, from classics to short stories own composition. As for drawings, this is a great way to teach children to count in their senior years. preschool age or learn colors in junior.

To do this, the picture shows circles of different colors, and the baby will need to find the right one among all the different colored lids and place it in the right place. The result is a simple and quite exciting game.

DIY crafts from plastic bottles for children

Fulfill DIY crafts from plastic bottles for children It may not be very simple, because plastic is difficult to process; you need sharp scissors or a knife, special paints, hot glue, etc. Therefore, it will be better if you do all the work together, as a friendly team, trusting the children to complete simple steps, and leaving the work with cutting or treating surfaces at high temperatures for yourself.

In the photo you can see how easy it is to do small toys, if you combine the lower, stable part with the upper. They can be securely connected with glue, or they can remain autonomous, looking like neat boxes. Be sure to paint it using acrylic or stained glass paints; children will like it much more. The idea of bottle nesting dolls painted in folk style is also interesting. To create them, you just need to find containers of different volumes, but of a similar shape, that could fit into each other.

This tutorial for making a lampshade using a container and lots of plastic spoons is a great option for a more complex collaboration. But ready product It will turn out so interesting and elegant that it can be used to decorate the interior, especially in a modern style.