Sofa for a summer residence (41 photos): using old furniture, making a swing sofa and exclusive furniture. We provide an excellent rest in the country by making a hanging sofa swing with our own hands How to make a wooden sofa for a large swing

To diversify the rest in the country, in the shade of the garden trees, there is a comfortable swing, where you can relax and recharge. We want to tell you how to make a garden swing with your own hands, because it is doubly pleasant when joy is also brought by the use of the product of your own labor.

Preparation for the construction of a swing

Choosing a place on the site

A swing is not just a bench or a stump with a seat, this type will be a stationary and relatively capital object, so you need to choose the appropriate place for it.

This means that we need to take into account all the nuances of this structure, namely:

Mobility. Part of the structure is a movable unit that performs damped oscillatory movements under the influence of gravity, like a pendulum. Therefore, it is necessary to calculate the maximum stroke of this pendulum in each direction and make sure that there are no obstacles within these limits: trees, stumps, bushes or pieces of garden furniture;
Stationarity. To ensure the movement of one part of the structure, it is necessary to securely fix the other part of it - the support frame. To do this, we will have to bury them in the ground and concrete the racks to a depth of 60 - 70 cm;
Site quality... You've probably noticed the constant puddles and mud under the yard or homemade swing, as the ground under the seat is constantly scrubbed with your feet during braking, and a depression is formed there where water and dirt accumulate. Therefore, for a comfortable use of the attraction, you should immediately save yourself from this misunderstanding - make a concrete screed or put tiles, rubber, at least make a gravel dump.

Important!
For normal and long-term operation of the structure, it must be installed as evenly as possible, that is, when the seat hangs freely in the lower position, the chain or cable must be perpendicular to the upper crossbar.
It is most convenient to use a plumb line to control this parameter.

It is also important to remember that it is very dangerous to be in the vibration zone of the attraction bench, as you can get a strong blow and seriously injure a part of the body. Therefore, this area should either be restricted for access or ensure that no people or animals enter it while the swing is operating.

Another aspect that is often overlooked: most likely the attraction will be a permanent place for your children to play, so it is better to think in advance about a way to limit the zenith or the highest point to which you can swing the pendulum. Otherwise, children, due to unreasoning, can swing it up to a full turn around the crossbar, winding chains on it and falling upside down.

Important!
From all that has been said, one can make the following summary: the place for should be spacious, even, free from obstacles and be in a line of sight relative to the house for control and safety.

The choice of material and type of construction

Several factors will depend on the choice of the type of construction and materials:

Reliability;
Durability;
Price;
Security;
Relevance from a design point of view.

As a rule, two types of materials are used for self-production: wood and metal, as well as their combinations. We will not consider concrete work and site improvement work for now.

At first glance, metal models are more reliable and durable, and other things being equal, this is the case. However, the metal is also susceptible to corrosion, and if it is improperly processed, this advantage is easily lost.

On the other hand, properly selected and treated wood, with timely care, demonstrates quite acceptable reliability indicators comparable to metal.

If we consider these materials in terms of safety and artistic value, then wood is the undisputed leader here (unless, of course, your garden is not made in the style of a Gothic cemetery and is not replete with forged trellises and fences).

It is also important that the processing of wooden parts is much easier and does not require tools such as a grinder, electric and gas welding, a drill for metal, etc.

If we talk about cost, then a really beautiful forged frame will cost much more than high-quality wood, and the use of banal pipes or corners will result in a "freak" that will ruin the beauty and atmosphere of a country estate.

Important!
We consider the most suitable from the point of view of expediency a wooden structure, reinforced with metal parts in some places.

Making a swing

Before starting work, it is necessary to draw up a work plan and a drawing. You can easily find drawings of a garden swing with your own hands on our website, you can also draw them yourself.

We take 4 three-meter beams 100x100 mm and make two L-shaped structures, connected at an angle of 50 - 55 degrees using furniture bolts;

We retreat from the lower end of the support 60 cm and divide the remaining part by three. At the level of the border of the first and second thirds, we mount the puffs from the edged board, two for each leg. We fasten with bolts.

Now we connect the resulting frames with a 100x100 mm crossbar made of oak timber. We select the length of the crossbar so that the width of the frame is 50 cm greater than the width of the seat.

We dig in the legs of the structure to a depth of 70 cm, where 10 cm will be filled with rubble and sand. Next, we concretize the pits with a solution of cement, sand and crushed stone 1: 3: 5. We set the structure along a plumb line so that the thread is perpendicular to the crossbar;

Important!
Part of the support beam, which will be immersed in concrete, is treated with bituminous mastic.

Output

A good wooden swing in the country is a great place to relax and a joy for children of any age. We told you how to make them yourself, the nuances are in the video in this article.

Garden swing for summer vacations in the country can be made with your own hands, you just need to choose a drawing . You can make a swing from different materials, choose a model to your liking.

Swings with a bench for 2-3 people are typical models for garden plots.

Track.

Basic structural elements.

The dimensions are calculated taking into account the model.

There are 2 types of parts connection. Welded is preferable, since the screw fastener unwinds under the influence of vibration during swinging. It is necessary to tighten the bolts and nuts periodically.

There are two types of connections of structural elements: welded and prefabricated

A hole is drilled in the crossbar, a bolt is inserted into it, to which an eye-nut is attached. The bench is suspended using a connecting ring. The connection is periodically lubricated to avoid damage to the mechanism, squeak.

The bench is suspended from the crossbar on rope ropes, chains, metal cables

The construction of an iron swing begins with the installation of a frame. For portable structures, it is more correct to make a connecting frame from a metal profile along the lower perimeter of the frame. Stationary - they are dug into the ground to a depth of 50-60 cm, then they are concreted.

All metal structural elements are treated with compounds that prevent the formation of rust, they are painted.

U-shaped swing

They are structurally simpler and consist of side posts and a crossbar. Stability is provided by the upper corner strips connecting the supports.

The U-shaped structure is less stable, therefore such a swing is buried in the ground, followed by concreting

When drawing up a plan, a model diagram, you need to take into account some points. The seats are suspended at a height of 50-60 cm. A minimum indent of 30 cm is made from the side supports.

Do-it-yourself garden swing made of wood

Naturally fit into the concept of landscape design. On the farm, you can always find material for harvesting from wood: timber, logs, boards. Ease of processing, plasticity of wood is another advantage. Unlike metal, it is not so hot in the sun.

Durability of structures is given by treatment with means that prevent the penetration of moisture into the material, varnishes that form a film on the surface.

It is also possible to assemble a swing made of wood and metal

The frame is made in the same shape as for metal structures. To build a swing, choose a model, make its scheme. Before drawing, they decide what type of wood will be used.

Layout of material on a 3-seat swing.

Measurements are made with a meter, the evenness of the structure is checked with a level, a building corner. Details are cut with a saw, jigsaw. Grind with sandpaper, grinder with a special attachment. To screw in self-tapping screws, a screwdriver is used, holes in the tree are made with a drill with drills of different diameters.

Everyone probably remembers their childhood sensations from riding a swing. Up into the sky and the whole world under your feet! Would you like to keep such feelings in the future? Sure, but it's not always worth swinging so hard. You can relax yourself in the country. For example, a sofa swing with your own hands is not an option? First of all, it is pleasant to swing on them. In addition, this is a kind of training for the vestibular apparatus. Consider a simple design option, how to please yourself by creating such a system with your own hands.

Hanging sofa swing: types

Some models are designed for children and some for adults. Therefore, before choosing a model, you should clarify the weight for which it is designed. In addition, the material from which the frame and base are made can be different. You can use metal or wood. The children's version can be plastic, but, as a rule, it is unlikely to withstand a couple of seasons.

But the design is unlimited:

Sofa on chains;
A bench with a soft seat;
Gazebo with sun and rain protection.

Important! Apply varnish immediately to protect the timber frame. Moreover, this must be done before the structure is mounted.

Most often, do-it-yourself swing on chains is installed outdoors, especially if they have a canopy. But still, they can be hung in closed rooms, provided that the ceiling can withstand the weight of the structure.

Why are wood products good?

A wooden swing has a lot of advantages, which include:

Ease of manufacture. For your own production of such an element of the interior, you do not need to be a professional carpenter, just minimal skills with this material.
Low financial costs. The manufacturing cost will be less than in the case of metal.
Versatility. Wood is an excellent material not only for making small one-seater structures, but also for large sofas.
Harmony. Such a product will be perfectly combined with a garden style, in contrast to a metal swing, which will not be appropriate everywhere.
Environmental friendliness. No one will dispute that wood is a natural, environmentally friendly material.
Security. This material is soft enough, so the possibility of injury to children is minimal.

Important! If a thorough preliminary processing of wood is not carried out in order to prevent the negative impact of external factors on it - precipitation, excess moisture, sunlight, frost, etc., the material may rot and deform. This is the main disadvantage of such models.

Why are metal products good?

Such a swing is characterized by:

Durability. This material will serve for many years without breaking or decaying.
Reliability. It is difficult to argue with this statement, since the metal is hard and stable.
Practicality. The material is not affected by negative environmental factors: rain, snow, sun rays.
A variety of models. The swing can be collapsible, welded or forged. You can choose the appropriate option specifically for your site.
With the appropriate skills, hand-made production is possible.

Important! Despite a considerable number of positive characteristics, do-it-yourself sofa swings made of metal have a number of disadvantages. For example:

On the one hand, it's good that the material is dense and hard, but you can easily get injured.

In order to avoid corrosion, a layer of special paint must be applied periodically.

Do-it-yourself garden swing

In fact, making a hanging sofa swing with your own hands is not so difficult. Consider an example with an A-frame.

Important! The first step is to select a place for installation. The surface must be flat. It is better to choose a place behind the house in order to have a full rest. Pay attention to the obstacles in the back and in the front: they should not be.

Materials for work

We carry out preparation of materials and tools:

Beams with a section of 100x100 mm, four pieces of 3 meters each;
Beams with a section of 80x80 mm, one piece 2.5 meters long;
Beams with a section of 45x56 mm, twelve meters;
Edged boards measuring 30x100x600 mm, one piece;
Sheathing boards measuring 26x46 mm, eighteen meters;
Pillows (if desired);
Large link chains;
Metal corners;
Eye bolts or hanging hooks;
Furniture bolts;
Self-tapping screws of different lengths;
Roof materials (plywood, planks or straw);
Concrete solution;
Screwdriver;
Grinder or jigsaw;
Construction level;
Electric planer;
Electric drills.

Progress

When everything is ready, we start assembling:

We choose a timber on which there should be no knots and cracks. The wood must be of a durable variety: cedar, spruce, oak or birch.
We make side racks. The difference in the width of the uprights and the seat must be more than half a meter. For example, if the width of the seat is 0.8 m, then the vertical beams of the supports should be at a distance of at least 1.3 m. All the necessary corners are sawn with a jigsaw. Long screws or furniture bolts are used to connect the upper part of the beams.
We mount the side ties. The side struts need to be divided into three sections.

Important! In this case, keep in mind that the calculation is based on the soil level. That is, you need to fold back about 60 cm, on which the racks will enter the ground.

The screeds will be located on the border between the lower and middle thirds of the uprights. It is necessary to measure and saw off the required length. For fixing, metal corners and self-tapping screws are used.

Important! To make the structure more durable, you can make another tie, located at a distance of 20 cm from the top of the racks.

It is necessary to cut out two isosceles trapezoids, the height of which is 10 cm. Using self-tapping screws and metal corners, they must be fixed on the inner side of the beams at the very top of the structure. They will become an additional support for the structural beam.
To make the seat, you will need to create two frames. For the seat - 2000x500 mm, for the back - 2000x650 mm. To strengthen the inner contour of the frames, vertical stiffeners are used. Self-tapping screws and corners are used to connect the back and seat. For cladding, a cladding board is used. Installation of armrests is also possible.
The suspension mount is created using eyebolts: one pair is screwed into the backrest, its upper bar, and the second into the seat, its front bar.
Using self-tapping screws, we mount the bearing support on the side posts.
We dig holes into which the side supports will enter. Their depth should be at least 0.8 m, since the racks will enter 0.6 m of them, and the rest of the space will be used for a cushion of rubble.
After filling the crushed stone, we place the beams in the pits and fill them with concrete.
Using the building level, we install the racks so that they are at an angle of 90 degrees.

Important! The immersion depth of the racks must be the same, otherwise the structure will not be stable and will become unusable very quickly.

If you still do not know what complete relaxation is, then for sure there are not enough swings on your yard, and not simple ones.What helps a person to relax? That's right, a comfortable sofa. What about a sofa swing at the site?they will definitely not be superfluous.

Types of hanging sofa swings

Note that there are adult sofa swings and swings designed only for children, so when choosing a specific model, check the weight that the structure can support.

In addition, sofa swings differ in the type of material, namely, the frame and base can be either wood or metal. Again, plastic swings can be purchased for children, but as a rule, plastic for such structures turns out to be very fragile and after a couple of years, the child will surely break them.

As far as design is concerned, there are no distinctions. There are also such models that resemble a full-fledged sofa, only without legs, floating in the air on chains. There are more modest options, reminiscent of a bench with soft seats, rather than real sofas. There is also a swing-gazebo, which is an independent structure with a canopy that will protect you from rain or sun.

So, if you have chosen a wooden swing, then it is best to cover the wooden frame with varnish, and this must be done before installation.

So, if you are hanging a sofa, in the truest sense of the word, then you do not need to worry about how to make the seats soft.In general, special sofas of lightweight construction are provided for the "swing", inside which there is a tree and a synthetic winterizer. Such material is very soft, and it will last a long time. For other options, such as a bench, a bunch of soft pillows will be required.

Place of installation of a sofa swing

As we have already said, a sofa swing can be both part of the interior and its completely independent element, as, for example, in the case of a structure under a canopy. Most often, a swing sofa is installed outdoors on tracks, on patios.

But, modern trends increasingly include sofa swings as a piece of furniture for closed rooms, such as a nursery or living room. Agree that it looks very impressive, but, unfortunately, not in every room you can hang a sofa from the ceiling.

A sofa floating in the air can often be found on the front lawn, however, in case of bad weather, you will have to take care in time to protect the sofa from moisture.

Do-it-yourself sofa swing

Yes, it's real, and it's easy to do it from scrap materials, in fact, you only need to buy fasteners and wooden beams. A stand or support is made of them, as well as the seat itself.

The frame is built according to the type of U-shaped or A-shaped frames, which must be fixed to the foundation. This foundation can be earth, or a concrete base, any other soil. Accordingly, the more massive the swing, the stronger the foundation should be. Most often, the sofa is hung with chains at four side points from the bottom and two from above - along the back. All you have to do is sew a soft mattress or buy more pillows so that the whole family can comfortably sit on the swing.

Photos of hanging sofa swings

To make your vacation at the dacha as comfortable and convenient as possible, you must, first of all, take care of comfortable and functional furniture. And if the purchase of new products is not included in your plans or is too expensive, then you can get out of this situation by making a sofa for a summer residence with your own hands. In addition, you can make other furniture yourself, using only the materials at hand.

What factors should be guided when choosing a specific solution

It should be understood that the operation of furniture in the country has a lot of features, and any product must meet the following requirements:

Functionality	Various artsy sofas do not fit well into the suburban interior. Classic products with a folding system look much better, because then they can be used as a bed
Practicality	The conditions for using furniture in a suburban area have their own differences. Upholstery should be well cleaned, or even removed for washing.
Reliability	Most often, the premises are not heated during the winter period, so chipboard furniture can deteriorate and delaminate. Natural wood works best
Profitability	Buying a new sofa at the dacha is not the smartest decision. You can make the furniture yourself, or you can move the sofa to the dacha from home, and buy a new model home

The main types of solving the issue with a sofa in the country

Consider the experience of thousands of summer residents to determine how best to act in a given situation. Of course, you can find other options, or you can learn someone else's valuable experience ().

Use of old furniture

This option is relevant if you bought a new sofa in the house, and you need to put the old one somewhere. And naturally, most often he goes to the country.

Of course, the best option is if the sofa is in excellent condition and looks decent. But what if the furniture is loosened and the upholstery on it is far from the first freshness?

You can carry out a few simple manipulations and freshen up your sofa:

Carry out the hauling of furniture... Most often, this service is provided by professionals, but its price is also quite significant, so you can do the following: buy upholstery fabric and a stapler and carry out the work yourself. The instructions for carrying out the work are simple: the fabric is neatly stretched and fastened with staples to the bar from the back side, even if there are small flaws, for country furniture it is not as scary as at home.
There is an option to do it even easier: to sew a sofa cover on your own or with the help of specialists... This option has two big advantages: it is easier to implement, and the cape can be removed and washed if necessary. This allows you to keep your furniture clean without any hassle.

Purchase or independent production of a swing sofa

This option is perfect for a suburban vacation.

A swing sofa for a summer residence is an excellent solution for a number of reasons:

In such a design, you can perfectly relax after working days or retire with an interesting book.
The product is perfect for outdoor installation: on a terrace or in the shade of trees.
In summer, you can pull on the sun shade and place soft cushions on the seat. They are removed for the winter, which is also very convenient and functional.

You can buy a finished product, or you can make it yourself, and you do not need the skills of a carpenter, since the design is quite simple. In addition, it can be made from both wood and metal, but in this case, welding will be required.

Advice! If you are not going to move the system after assembling it, you can do it thoroughly and concrete the posts in the ground, so your system is guaranteed not to loosen.

Independent production of exclusive furniture

You will be surprised how easy it is to make a stylish country sofa. To do this, you will need the most ordinary pallets, which will not be difficult to get. The use of these structures for furniture has long been a hit among designers and is widely used in Europe.

The work is carried out as follows:

Pallets of the same size are selected, they must be intact, if necessary, they can be strengthened with self-tapping screws.
Further, all surfaces that will be visible must be sanded to perfect smoothness - so that during operation no one will drive a splinter.
After that, using the same screws, the elements are connected to each other. At first, it is best to put all the fragments into the intended structure and then decide how best to carry out the work.

Advice! You can assemble not only a sofa, but also a table - such an ensemble will look great in any country house.

You can also make almost full-fledged wooden sofas for a summer residence. This will take more effort, but the result is worth it. A frame of any configuration you like is going to be assembled; it is best to strengthen the connections with corners. The back is made of slats and is angled.

When the assembly work is over, the surface is sanded and covered with paint or a protective compound. After the impregnation has dried, you can lay down pillows and use the furniture.

Output

It is possible to make furniture elements in the country, practically without spending money, the main thing is to show imagination and give life to old and seemingly unnecessary objects ().

The video in this article will clearly show some interesting nuances related to the topic in question.