Plastic panels which company is better. Which pvc ceiling panels are best for the ceiling: types and sizes

Every year more and more popular among finishing materials buy plastic panels for the bathroom. If before the most the best option tile was considered to decorate the walls in the bathroom, now she has a worthy competitor in all respects. These are plastic wall panels that are ideal for rooms with high humidity, i.e. bathrooms and kitchens.

Repairs are hard work and very expensive. For this reason, many try to possible ways save cash and simplify the process. To do this, manufacturers of materials for interior decoration have come up with many different ways and periodically supplement the range with more advanced products.

So convenient and practical that some apartment owners use them in places where there is no particular humidity, but the coating on the walls must be good and durable. We are talking about narrow corridors and hallways.

Patterned bathroom panels are very popular.

And yet, most often the decoration with plastic wall panels can be found in bathrooms. The popularity of this type of finishing materials is quite justified. Panels are easy to install and are much cheaper than tiles. The price of panels for the bathroom, the photo of which is just below, depends on the quality and the manufacturer. At the same time, plastic perfectly withstands and high humidity, and sudden changes in temperature, remaining in its original form.

An additional plus is the color range offered by manufacturers. Wall panels for the bathroom are so diverse that every (even the most demanding) buyer can find what he likes. Bathroom panels with a pattern, for example, in the form of marble, granite and other natural materials, are very popular. Often, in addition to the walls, they also install a screen under the bathroom in a similar color scheme. This is very convenient and makes it possible to hide communications behind a kind of screen.

Panels are easy to install and are much cheaper than tiles

Nowadays, wall panels are used as often as tile. In this case, the first option can often be found outside the bathroom. If it is customary to tile only an apron in the kitchen, then plastic panels can completely decorate the walls. It is very comfortable, practical and looks very good.

PVC bathroom wall panels are chosen for their numerous and undeniable advantages. Plastic has a high level of fire safety, as modern materials do not support combustion. At the same time, the moisture resistance of the panels is very high. This type of material will not let moisture through, which will eliminate the possibility of rotting. With moisture and rather high temperatures, PVC panels do not deform.

The indisputable advantage of plastic is that it perfectly tolerates how high temperature, and low, for this reason, it can be used even in those rooms where there is no heating.

Plastic has a high level of fire safety

The service life of plastic panels is much longer than that of other materials that are often used for wall decoration in the bathroom. PVC will last even longer than tile, not to mention ordinary paint and wallpaper. At the same time, plastic is an environmentally friendly material. It does not emit toxins even with significant heating.

And yet, most owners make bathroom decoration with plastic panels, the photo of which can be seen just below, due to the affordable cost. Thus, repairs in the bathroom and bathroom will be much cheaper than when using tiles. You can not ignore the ease of installation of plastic panels. Their installation does not require complex tools, and the work itself takes place in relative cleanliness, which is a rarity during repairs.

A bathroom finished with plastic panels will not only last a long time without the need for repeated repairs, but also has a beautiful appearance. Depending on their preferences, the owner of the apartment can choose the most suitable texture and color for himself.

A bathroom finished with plastic panels will last a long time and has a great appearance.

Types of plastic panels

Before proceeding with the choice of plastic for repairs, it is necessary to decide on the type of PVC panels for the bathroom, since this type of finishing material is sold in several variations.

Rack panels are distinguished by a narrow and long shape. They can be installed vertically or horizontally. Depending on the type of installation, the bathroom can become either wider or visually elongated. This is convenient for adjusting a small or very low room.

PVC panels in the form of rails are sold in various colors. At the same time, experts recommend not dwelling on one shade or structure. A little imagination - and from the slatted panels you can create something special that will delight the residents of the apartment and surprise the guests. Often, slatted plastic panels are used to design a high-tech bathroom.

Slatted panels are distinguished by a narrow and long shape

Plastic bathroom panels in the form of tiles are considered more convenient than slatted ones, as they are small and their installation is extremely simple. If necessary, you can choose plastic panels from 30 centimeters or more. Meter options are also available. This type of panels is considered the most profitable, so it is chosen by economical owners.

Here, too, it is not necessary to use only one color. PVC panels in the form of tiles look good if you stack them in a checkerboard pattern or create an unusual geometric pattern.

When a large wall is to be finished, it is most convenient to use sheet plastic panels. Their dimensions are calculated in such a way that the number of joints is reduced to a minimum. Thus, you can significantly save on material. The only disadvantage of large sheet panels is that it will not be possible to combine different colors, so the room can turn out to be somewhat monotonous and boring.

Regardless of what type of PVC panels for the bathroom will be used, all these types of material have a high level of moisture resistance, maximum environmental friendliness and practicality, that is, they are easy to wash and clean. A big plus of plastic panels is that they do not let moisture through even at the junctions. In addition, PVC materials create good heat and sound insulation.

Installation nuances

Experienced craftsmen know how much easier it is to work with plastic than with tiles. Nevertheless, the installation of PVC panels has many nuances that you need to know about, and they should not be ignored in any case. If a person does not even have the slightest idea how to finish the bathroom with plastic panels with his own hands, it is better to watch the video that can be downloaded below. In extreme cases, you can leave this work for professionals.

Installing plastic panels in the bathroom on your own is quite difficult and risky.

The most difficult thing to work with is tiled and slatted panels. For them, you will definitely need a crate, which is a frame made of metal or wood. It is attached to the wall with brackets, and then it will support the panels. With sheet panels, everything is much simpler, since they can simply be attached to the wall. Between themselves, sheets, slats and tiles are connected by special fasteners.

To properly install plastic panels in the bathroom, you need to consider some rules. First of all, you need to correctly calculate the distance between the frame rails so that the structure is as strong as possible. You also need to think about a way in which you can make the joints more airtight. In addition, special pads are used that hide the places where the screws were used.

Experts say that it is quite difficult and risky to install plastic panels in the bathroom on your own, since improper installation will only be a translation of a rather expensive material.

The service life of plastic panels can reach 25 years

It is better to combine the installation of PVC panels for the bathroom with a general renovation in this room and the bathroom. Thus, once having taken up the walls, ceiling and floor, it will be possible to forget about the repair work in this room for a long time. Manufacturers of finishing materials claim that the service life of plastic panels can reach 25 years.

Experienced craftsmen recommend immediately repairing the bathroom, not only around the perimeter, but also to deal with communications, replacing plumbing and all kinds of fittings. An integrated approach will ultimately be cheaper, both in terms of money and the number of nerves spent.

Options for fixing plastic on the walls

If the owner of the apartment has enough knowledge in the field of repair, desire and free time, while plastic panels have already been purchased, it is worth thinking about how to install them. There can be several fasteners for PVC panels.

We offer you to get acquainted with the distinctive features of PVC products and their main sizes.

Read in the article

Scope of PVC panels

This finishing material is not afraid of moisture. It is widely used for decorating walls and ceilings in rooms with a high level of humidity. With its help, finishing is carried out.


Sufficient frost resistance makes it possible to use panels in decoration, in an apartment or a terrace in a private house. Since the material is environmentally friendly, it is possible to use it for finishing residential premises. Ease of care (the resulting stains are easy to wash) makes PVC panels relevant for finishing utility rooms.

Plastic lamellas are relevant not only for residential premises. With their help, walls and ceilings in trading floors and office space. In some cases, products are used as decoration and either window.


Varieties of PVC panels for their intended purpose

This finishing material is widely used for decorating walls and ceilings. The former have higher strength characteristics, the latter have less weight. When choosing, you should pay special attention to the purpose of the model you like.

Attention! PVC wall and ceiling panels are not interchangeable.

Wall models have a length of 2.5 ÷ 6 m with a width of 25 ÷ 30 cm and a thickness of 6 ÷ 10 mm. Considering that the ceiling is not subjected to mechanical stress during operation, the ceiling products are made thinner. Their dimensions are 6÷10 m, 25÷30 cm and 4÷5 mm, respectively. Manufacturers offer products with matte, glossy surfaces, as well as varnished.

Using PVC panels as a finishing material, you can refuse pre-training grounds. Installation can be performed without the use of special equipment, which greatly expands the possible area of ​​use.


Types of panels by connection method

Manufacturers offer lamellas with different connection patterns. The presented assortment can be divided into products:

  • seamless type;
  • with chamfer (rust);
  • with embossed surface.

Seamless products are relevant for decorating the ceiling. Due to the special design during installation work, they are located close enough to each other. Observing the technology for performing installation work, you can make the connecting line almost invisible.


Attention! Low-quality PVC panels as a result of thermal exposure may be subject to deformation changes. This will cause a change in the shape of the formed coating. The material must be carefully selected.

PVC panels with a chamfer have a characteristic decorative recess at the junction of the lamellas. Such products are sometimes called rustic. Most often used in the design of the ceiling.

Panels with a relief surface are relevant when decorating walls. Special finishing significantly increases their strength characteristics and wear resistance. This is reflected not only in the appearance of the formed surface, but also in the selling price.


Advantages, disadvantages and properties of PVC panels

PVC plastic finishing material of all sizes has a number of undeniable advantages:

  1. Excellent light and moisture resistance, resistance to environmental influences. The formed coating is able to maintain its presentable appearance for a long time.
  2. Mechanical strength with a relatively small weight of the lamellas.
  3. Heat and sound insulation.
  4. Ease machining. To form the desired contour, you can use a standard set of carpentry tools. If necessary, individual panels can be glued and welded.
  5. Environmental Safety.
  6. Compliance with fire safety requirements.
  7. Versatility. PVC panels can be used for interior decoration for various purposes.
  8. Various sizes. The presence of standard sizes allows you to use products of different sizes or the same size, but with a different pattern for decorating walls or ceilings.
  9. Wide range of. Manufacturers offer with different textures and colors, which allows you to choose suitable option for any interior.
  10. Presentability. If desired, the appearance of the formed coating can be changed by applying a self-adhesive film or paint coating to the surface. The possibility of applying solvent or silk-screen printing will allow you to become the owner of a unique material. The availability of additional additional decorative accessories allows you to emphasize the contours of individual slats.
  11. Long service life up to 20 years.
  12. Ease of installation. Products can be mounted not only strictly vertically or horizontally, but also at any angle. Installation can be done on your own.

Despite the undeniable advantages of the material, there are a number of disadvantages. Sometimes the use of PVC panels can be if the premises serve as escape routes in case of an emergency. When burning, PVC produces acrid fumes.


How to choose and buy high-quality PVC panels

Having decided to buy PVC panels, you should first decide on suitable model. Given the large range of products offered by manufacturers, in the selection process it is worth focusing on the main purpose of the room. Based on the selected one, it will be easier to make a choice in favor of a particular model.

During the purchase process, you should make sure that all products have a perfectly flat surface. Only in this case, the formed coating will have a presentable appearance. All lamellas must be from the same batch so that they do not differ in color scheme. It is better to make a purchase in a specialized store.

If you have not yet decided on a suitable model, we suggest that you look at the photo of PVC panels in order to make it easier to make a choice

1 of 6

PVC panels: dimensions, release form

The thickness can be 5 mm or 8÷10 mm. For these sizes, manufacturers offer moldings that have a standard configuration and dimensions. The dimensions of plastic panels depend on their release form. Manufacturers produce lining for 3 m. For more wide panels length can be 2.6; 2.7 or 3 meters. Some manufacturers offer material up to 6 m long. This length is sufficient indoors without horizontal seams. The width depends on the release form:

  • Clapboard. Width 10 cm. Manufacturers offer lamellas with a standard wide lock, which is sometimes called a European, and with a narrower one (polka). For structures with a double profile, the width increases to 12.5 cm. However, this material has found limited use. lining may be different. However, white products are most widely used;
  • Panels. Width can be 15÷50 cm;
  • Sheet. Width 80 ÷ 203 cm with a length of 150 ÷ ​​405 cm. The thickness of the sheets can reach 30 mm.

The main types and sizes of PVC ceiling panels

When choosing a plastic profile for the ceiling, you should not only pay attention to the appearance of the material you like, but also correlate its dimensions with the configuration and dimensions of the room. It is worth giving preference to the size that will minimize waste. So, if it has a width of 1.5 m, PVC ceiling panels are most often chosen, having a length of 1.5 ÷ 3 m. Using lamellas, the length of which is a multiple of the length of the room, you can reduce the number of butt joints.

Ceiling decoration is most often performed using products having a length of 2.5 ÷ 4 meters and a width of 10 ÷ 50 cm. Lining and a profile of standard width are quite popular. The choice of standard size depends not only on the size of the premises, but also on the shape and location lighting fixtures.


The main types and sizes of PVC wall panels

To decorate the walls, a polyvinyl chloride material is chosen, having a width of 0.5 ÷ 2.3 m and a length of 1.5 ÷ 4.05 m. The thickness can be 1 ÷ 30 mm. In the first case, the foundation must be prepared properly.

The dimensions of PVC panels for walls depend on the design of a particular room. If with their help it is planned to finish only part of the wall, choose a material with the nearest length, a multiple of the height of the finish. The shape of the profile can be different, but sheet material is the most popular.

Attention! When using large panels, installation work can be greatly simplified.


Characteristics and dimensional parameters of sandwich panels

Demanded when decorating walls. Differ in the increased cost, demonstrating attractive appearance and high mechanical strength. With their help, slopes are often erected and made out.

The sizes of sandwich panels vary significantly. Manufacturers offer material with a length of 3 m with a width of 0.9, 1.15 and 1.5 m. The standard thickness of products is 1, 2.4, 3.2 and 4 cm.

The main advantage of PVC sandwich panels is high resistance to external influences. The formed coating can last at least 20 years.


Article

When making repairs in an apartment or house, the question of choosing materials often arises. After all, they should be both attractive and of high quality, and fit the chosen interior. The modern market offers a huge amount of finishing materials, and PVC panels have recently begun to stand out among them. Due to the variety of options for this material, you can experiment. However, the abundance of options can make you choose the most suitable material for a long time.

Properties and characteristics

To understand what PVC panels are, you first need to find out what these three letters hide behind them. In fact, everything is extremely simple - they stand for polyvinyl chloride (organic polymer). This is a type of plastic with its own advantages and disadvantages.

This polymeric material is used for decoration, and it is worth noting that recently it has become very popular. The composition of polyvinyl chloride includes chlorine (57%), carbon (42%), hydrogen with impurities (approximately 1%). It is very rare, but still found, that lead is added to PVC as a stabilizer. Of course, because of this component, there were rumors that the panels are unhealthy. However, today lead is replaced by zinc and calcium in equal proportions, and therefore they are completely harmless.

PVC panels are produced in standard sizes according to GOST. So, the length of the panels is 2700, 3000 and 6000 millimeters, and the width is 100, 250 and 375 millimeters. As for the thickness, it depends on the manufacturer and model, and its value varies from 1 to 30 millimeters.

PVC can be used at temperatures from -50 to +60 degrees. Moreover, it is desirable to use the panels for interior decoration. This is due to the fact that in the premises during the day the temperature difference is not too strong. Of course, there are types of panels, for example, for finishing a balcony, which are resistant to extreme cold or sunlight. In addition, they calmly tolerate temperature fluctuations.

The strength of the panels depends on how many percent of the polyvinyl chloride they contain. Also, the strength is affected by the number of stiffeners. Moreover, the ribs should not be visible through the front side of the panel.

The colors and texture of PVC panels are completely unlimited. Today you can find both white classics and wood or stone style, and you can get absolutely any shade on order. It is worth noting that when painting this finishing material, water-based paints are used.

The surface of the panels can be either matte or glossy. There is only one manufacturing technology - varnishing, just after glossing the panels undergo additional processing. Such a coating carries not only a decorative function, but also a protective one. After this treatment, the material becomes antistatic, wear-resistant, resistant to mechanical damage (scratches), and also better tolerates ultraviolet radiation.

Lining made of polyvinyl chloride is used for finishing walls and ceilings in residential premises, offices, shopping malls. At the same time, in apartments they can be used everywhere, including the hallway, bathroom, kitchen, living rooms. Of course, most often they are still used in the bathroom and in the kitchen. Also, the panels are used for finishing slopes on windows, as well as loggias and balconies.

Such an extensive use of this finishing material is primarily due to the fact that it is easy to care for and even easier to install. The light weight allows you to finish both the walls and the ceiling with such panels even alone. Moreover, they are sold in a very convenient package, which greatly facilitates their transportation.

Another important property of PVC panels is that they have low degree flammability. This just allows them to be used without undue embarrassment, in particular, in the kitchen, even next to a gas stove.

Advantages and disadvantages

Plastic panels, which are also widely known as plastic lining, have come a long way until they were able to appreciate them. To understand why they have become popular lately, it is worth knowing their pros and cons.

Of course, you should start with positive qualities:

  • Affordable price. This quality can be safely called the most important advantage of PVC panels. This material is several times lower in cost than most other finishing materials. And despite the low cost, plastic panels also have excellent properties.
  • Ease of installation. Working with PVC is very easy. As a result, they are often mounted independently, which saves money on the services of a specialist. In addition, the ease of use also allows you to save on finishing time.

  • Mask imperfections. Such a finish will also become indispensable if there are any flaws on the walls or ceiling. With their help, any irregularities or other defects are hidden very easily. After finishing with this material, an even and pretty room is obtained.
  • Easy to replace damaged PVC panel. In the event that for some reason one of the panels was damaged, it can be easily changed to another. As a result, you do not have to renovate the entire room again, which again saves time, effort and money.

  • Ease of care. A room with panels will always look clean, because they are easily wiped with a damp sponge. To make them always look like new, it is enough just to periodically carry out wet cleaning. Of course, special attention will have to be paid to the joints of the panels, but these are trifles.
  • Moisture resistant. Not every finishing material can be used to finish a bathroom or a room with a high level of humidity. At the same time, a rusty coating does not form on the panels and a fungus cannot appear. Thus, they make it possible to fulfill the dreams of many housewives about the absence of problems with excessive moisture in the kitchen and bathroom.

  • Little weight. Lightweight panels won't hurt at all load-bearing structures. At the same time, they are easy to transport and mount even alone.
  • Long service life. Quality PVC can look like new for 40 years. Such a dignity cannot go unnoticed.
  • Great variety of colors. A huge palette of PVC makes it easy to match them to any interior. And quite often, not plain panels are in demand, but with drawings, as well as in the form of imitation of wood or stone.

  • Environmental friendliness. If quality materials are chosen, they are completely non-toxic.
  • Sound and heat insulation. The PVC finishing of the rooms makes them even more soundproof. At the same time, they will also keep warm better.
  • Strength. Not everyone agrees with this dignity. In fact, the panels are strong and flexible, but many make the mistake of choosing. Indeed, for wall decoration, panels with a higher density should be used, and “lightweight” options are also suitable for the ceiling. Light impacts and other minor mechanical damage to the panels are not terrible.

  • Withstand temperature fluctuations. Most PVC panels can easily tolerate temperature fluctuations from +50 to -50 degrees.
  • Application versatility. In addition to walls, ceilings, windows, door slopes, they are also used to create shower cabins, formwork of non-standard shapes is mounted. And even summer residents have found a use for them, forming excellent beds from them.

With all the advantages of so many negative qualities, this material does not have so many:

  • Distortion during sudden changes in temperature. Of course, in a certain temperature range, this material serves perfectly. However, if there is a sharp jump, for example, by 20 degrees (no matter in which direction), then it can be deformed.
  • Area reduction. Sometimes indoors it is necessary to use additional structures for mounting panels. For example, if the walls are very curved, you first have to install a wooden or metal frame. As a result, the area of ​​\u200b\u200bthe room may decrease slightly.

  • Acrid smoke from a fire. PVC - practically non-combustible material, but when it burns, it produces a very acrid smoke. Therefore, prolonged contact with it can be harmful to health.
  • UV resistant. This disadvantage is especially noticeable on white panels, which turn yellow over time under the sun's rays, losing their beautiful appearance.

  • Bad smell. This disadvantage of the panels disappears a few days after their installation. And it doesn't always happen.
  • Not suitable for children. Despite the high environmental friendliness of the panels, many experts still do not recommend using them for children's rooms. In addition, some cheap panel options may contain harmful substances.

Varieties and applications

Present on the market today a large number of plastic panels. With them, the cladding of houses becomes pleasant and simple. Surprisingly decorative wall PVC able to make the walls look like laminated. They are very different, and you can choose them even based on the type of furniture.

However, such a variety can sometimes even make it difficult to choose. To make this task easier, it is worth considering in more detail each of the types of panels that are on sale:

  • Rack (vinyl) panels, they are plastic lining. In their appearance, they really strongly resemble a lining, hence the name. use this species panels for walls and ceilings. Moreover, the main advantage of the view is that the lining can be placed both horizontally and vertically. The first location option will visually increase the height of the ceilings, and the second one will slightly reduce it. Such type-setting rectangles are attached to the wall with metal brackets or just glue.

The most popular types of lining by connection:

    "European" has a wide castle;

    "Polka" is distinguished by a narrow castle connection.

  • Tile panels. By themselves, such typesetting panels are often squares, that is, they look like familiar tiles. Installation of this type of material will be very difficult and time-consuming. However, in the end, you can experiment with interesting designs, including unique copyrights. Squares differ in their size, design, texture.

This type is especially relevant for interior decoration of a bathroom or kitchen. Moreover, in the latter case, it is best to select only the working area with panels for tiles.

Installation of such panels is carried out using a special adhesive. They are connected to each other like a constructor or a puzzle - the panels have grooves and protruding parts with which they are attached.

  • Sheet panels, or seamless. They are definitely the most beautiful view PVC panels. This is due to the fact that no joints are formed between the panels during installation. Most often they are used for wall decoration. Installation of this type is carried out using glue or nails.

  • Sandwich panels. This type is often used as a decorative finish. With such panels, any room will look more representative and aesthetically pleasing. They are also used for finishing partitions and window slopes. These panels consist of two sheets.

In order for this material to acquire the best thermal insulation properties, polystyrene foam or polyurethane foam is used as a filler for it.

According to the material from which the outer layer is made, sandwiches are divided into three types:

    Laminate. Such plastic is formed by combining decorative paper, kraft paper and overlay. All this is impregnated with formaldehyde and pressed. Possesses high durability and reliability. Withstands even heavy loads.

    Foamed. This plastic has a porous structure. Best suited for places with high humidity. Moreover, it is good heat-insulating material. The surface of such panels, as a rule, has a roughness.

    Hard. It can be either matte or glossy. Quite often used for decoration window slopes and doorways.

Dimensions and decor

The dimensions of PVC panels vary depending on their type. Therefore, it will be useful before choosing the desired option, to get acquainted with what the panels can be in size. After all, depending on this, you can choose the most optimal option for a particular interior.

Dimensions of plastic lining:

  • thickness - from 8 to 12 mm;
  • length - from 300 to 1200 mm;
  • width - from 100 to 500 mm.

Tile panel dimensions:

  • thickness - from 0.5 to 1 mm;
  • length - up to 1000 millimeters;
  • Width - 500-1000 mm.

Sandwich panel dimensions:

  • thickness - from 10 to 32 mm;
  • width - from 900 to 1,500 mm;
  • length - up to 3,000 mm.

In addition to size, the panels are also distinguished by their decorative appearance. The coating of the panels differs, which can be glossy or matte. They can be colored, patterned and even embossed. For example, lining is most often white matte or glossy, sheet panels can even imitate tiles with their appearance.

Depending on the type of coating, the panel can be matte or glossy. There are also differences depending on the application of paint to the surface of the panel. For example, a pattern is applied to a white panel, and then, using a special paint roller, it is painted in colors. After that, a colorless UV varnish is applied as a protective layer.

There are types with thermal printing, which makes them more diverse and affordable. However, these options are shorter in duration.

Of course, today it is not difficult to choose finishes, even if the interior design requires something special. For example, if the interior is played up with a marine or country theme, then panels with imitation of a stone cut will be an excellent option. Look amazingly realistic PVC options depicting natural slate. This solution is especially relevant for the bathroom.

Very refined and subtle options among plastic tiles are also not uncommon. You can choose models under blue marble. A little suitable elements decor, and a room with such tiles will be the height of elegance. Of course, the most common White color or panels with a pattern. However, dark colors have shown that they are in considerable demand.

Among those in demand are red shades, transparent panels, bamboo imitation. Particularly impressive are the wide and thin sheets of panels that give the walls the smoothest and most luxurious look. It is worth noting that wood panels (especially pine) also proved to be one of the most popular.

An amazing decor can be mirrored PVC, which instantly give the room an attractive look. They are actually glass made of polystyrene, which is attached to the frame. Moreover, a pattern, perforation can be applied to its surface, or it will be with a holographic effect.

Panda panels have an exclusive design. They have very high quality and bright drawings. Moreover, the images are visible very clearly, it is not difficult to see even the smallest details. The interiors of the bathroom, hallway, kitchen or living room with such panels will be chic. Indeed, in the collections there is one main drawing and from one to five additional ones.

Chic wenge color options will also be an excellent solution. Their rich dark brown color, approaching black, will bring real tropical notes. An instant transformation can be achieved using black and white patterns on PVC. For lovers of brighter and more luxurious, there are options in combination with a golden hue.

Varieties of decorative PVC decoration there is a huge variety. It is enough just to choose the appropriate variation for a certain interior.

Manufacturers

There are many panels on the market different manufacturers. Of course, among them there are options that were able to prove the quality of their products. It is on such PVC that you should pay attention when choosing. Today, manufacturers such as KronaPlast, Aquaton and Vox stand out among the entire range.

"Kronaplast" has been operating on the PVC panel market since 2000. Currently, this company is a leading manufacturer of finishing materials. Among the company's products you can find plastic panels for walls and ceilings, lining, floor plinths, accordion doors, moldings. Particularly noteworthy are decorative plastic panels, the Ceramica collection for tiles, laminated, offset and ceiling panels from this manufacturer. The company's products are also different big amount colors for every taste.

Aquaton LLC has been operating for over 16 years. Now the company produces a large number of materials from fibreboard and polyvinyl chloride. The manufacturer presents not only panels, but even PVC window sills, sheet panels, as well as various fittings. Aquaton offers interesting options in its Novita collection. This collection also includes panels for walls, ceilings, moisture-resistant floor coverings and composite marble based on rigid PVC.

VOX has been producing building materials and furniture since 1992. To date, the company represents a huge amount of PVC materials for outdoor and indoor use. Moreover, there are panels for walls, ceilings and even facades. The company constantly cares about the development of technologies, which allows maintaining high quality and affordable prices.

Vox decorative panels are suitable for finishing both residential premises and commercial real estate (offices, shops, utility rooms). Unique interiors can also be created with Vox's "Didital Print" collection. It should be noted that the colors of the panels of this manufacturer are distinguished by a special European aesthetics.

You can buy high-quality and interesting panel options today even in the online store. For example, the Axon store offers a large number of finishing panels for any interior from leading manufacturers. At the same time, they can even be ordered for delivery by a certain time, which is very convenient. You don't even have to leave the house to update the interior.

Criterias of choice

At choice of pvc panels, you should pay attention to a number of some parameters. It is advisable to first decide where exactly the panels will be used. Today they are used not only for walls and ceilings, but also as cladding for balconies and loggias, slopes of windows and doors, and even as floor formwork for steps of the original form.

One of the main parameters are the stiffeners that are inside the panels. It is they, or rather, their number and location (at least 10 millimeters between them) that determine how quality product. The higher the rigidity, the more pressure the panel can withstand. Moreover, the ribs should not be visible through the front side of the PVC.

It is also worth carefully examining how the paint is applied to the surface. Ideally, it should lie in an even layer, and there should be no stains, streaks or other defects. It would be useful to carefully inspect the panels also for scratches, dents, cracks. It is best if the panels are covered with a protective film.

Before choosing panels with a pattern, special attention should be paid to how it is made: thermal printing, offset printing or lamination. After all, each panel will need to be installed so that a full-fledged image is obtained. Moreover, such panels require very accurate measurements. Having made a mistake with the calculations, then you may not find the necessary drawing. It is worth considering the fact that when ordering a batch with a similar pattern, you can find out that the panels differ in some details in the image.

For living rooms, panels with printed patterns are the best option. As for bathrooms, as well as kitchen spaces, thermal transfer options should be selected for them. Such panels better tolerate detergents and frequent friction.

When choosing panels, be sure to check how tight their joints are. The smaller the inter-seam space, the more neat and even the wall looks. Of course, the best option become seamless panels.

The weight of the lining matters, and this must be taken into account when choosing panels. Based on this parameter, one can get an idea of ​​the panel wall thickness, stiffness, and the number of stiffeners. For example, one square meter of a standard PVC lining weighs about 1.5 kilograms.

Panel thickness is also important. Often it varies from 0.1 to 10 millimeters. However, the highest value given parameter has when decorating walls. And in this case, the greater the thickness, the better. For ceilings, panels with the smallest thickness can also be selected.

According to professionals, high-quality plastic lining contains about 20 percent of chalk. If this indicator higher, the product will be more fragile. To check the amount of chalk in the material, you need to bend the corner of the panel. In a plastic product in the place where there was a bend, neither a strip nor a crack will appear.

When choosing panels, it will also be useful to sniff them. After all, if in a store where finishing materials are sold, there is a sharp smell of plastic, then this indicates their toxicity. In fact, a specific smell should only be when opening a new package with lining. And it can not be called sharp.

Well-known trade brands already have a well-deserved reputation, so it is better to choose well-known brands that try to maintain quality at a decent level.

When choosing panels, you need to think in advance exactly where they will be used. After all, PVC is ceiling and wall. Recently, you can even find floor panels. By design, they practically do not differ from each other, but their strength and some characteristics still have differences.

If the material is purchased for finishing walls with large dimensions, then it is better to opt for sheets of maximum dimensions. Thus, the interior will look more aesthetically pleasing.

The resistance of PVC to various temperatures deserves special attention. Especially this parameter should be taken into account when choosing a material for finishing a kitchen, bathroom or balcony.

Price also matters. Moreover, it often depends on the manufacturer and quality. However, it cannot be said with absolute certainty that the most expensive panels are the highest quality. It is better to stop at a reasonable middle.

By choosing specific PVC panels, you can even ask the seller for a certificate confirming the quality standard, as well as wear resistance, fire safety and other product parameters. Do not be afraid to request these documents, as their absence indicates a low-quality product.

Frieze panels are lightweight and highly durable, making them indispensable for bathrooms or kitchens where interior partitions are made of fragile drywall. Panels under a natural stone or a tree. Moreover, the first option is lightweight, but it looks very realistic, and the second one is moisture resistant and does not lose its appearance over time. PVC with a 3D image will also be an interesting option.

For finishing a balcony or loggia, laminated panels will be an excellent option. They do not fade in the sun, are not covered with cracks, do not deform from low temperatures. In terms of resistance to mechanical stress and image quality, such panels can easily compete even with MDF.

If the apartment has high ceilings, then it is best to opt for glossy panels. They are an excellent reflector of light, which will make the room even brighter and more pleasant.

Accessories for mounting PVC panels is also not the last point that should be considered when choosing. After all, molding ( special mounts) must be of high quality, match the grooves to the thickness of the panel and be matched exactly in color. Otherwise, the fittings will stand out too much against the background of the panels. You should also be aware that moldings may vary depending on the surface to be faced.

Mounting

Finishing with PVC panels can be carried out with the installation of a frame or by installing panels without crates. To better understand which method to choose, you should read them in more detail.

The easiest option is to mount the frame. For its manufacture, you can use a variety of materials.

Frame from wooden beam Suitable for most living spaces. However, it is worth remembering that it is not suitable for bathrooms or kitchens, as it does not tolerate high humidity. And in these rooms, the panels will have to be washed frequently.

For quick installation, it is necessary to use a frame made of plastic strips.

The most reliable is definitely a frame made of a metal profile. Of course, it should be borne in mind that it is very expensive.

To install panels without any crate, you need to have solid experience, as well as even walls and ceilings. Of course, you can try and understand this process, but it is worth considering that skills are also important here. Main disadvantage this method is that if one of the elements loses its appearance, then to replace it, you will have to veneer the entire wall.

Which method to use is up to you to decide. Here it is necessary to take into account the area of ​​\u200b\u200bthe room to be finished, and the shortcomings of walls with ceilings, and most importantly, take into account the peculiarities of the microclimate.

When you have decided on the installation method, you should proceed to preparation. At this stage, you will need a tape measure, a level, a ruler (preferably a meter long), a pencil or marker, a screwdriver, a drill, dowels, self-tapping screws or nails, a stapler, a hacksaw. In addition, it is worth preparing bits, drills, staples and other consumables in advance. If all this is taken care of in advance, then the time for finishing can be significantly reduced.

You should not mount the panels on the walls as soon as the sheets were brought home after purchase. It is best to give them 24 hours to mature. To do this, the panels are unpacked so that they can "get used" to the conditions of the room.

Also on preparatory stage complete dismantling of the old wall and ceiling covering should be carried out. Then it is necessary to carefully level the surface, repair holes and remove other defects so as not to spoil the quality of the PVC coating. Otherwise, the panels will stick out in places, and in the future they will completely deform. At the end of the preparation of the walls and ceiling, they should be covered with an antiseptic. This is especially important in the bathroom and kitchen.

Mounting with a frame has some advantages. The main one is the ability to eliminate significant irregularities and various wall defects. Also, the frame allows you to make the thermal insulation of the room better and hide various communications.

When the walls and ceiling are prepared, you can start marking them. This is done exclusively with the help of the level. It is important to avoid even small mistakes here.

Frame assembly starts from the bottom. The lowest row must be raised above the floor by 1-2 centimeters. This will allow the panels to fit very snugly against the wall. Next, using a square, level and pencil, you need to make a mark and climb 50 centimeters up. At this point, you need to make another part of the frame.

Repeating this procedure, you need to reach the very ceiling. Upon completion of the work, you should evaluate how parallel the lines are and whether they are at the same distance from each other.

When all the lines are outlined, you can install the crate. For wooden crate It is better to use an additional disinfectant solution. Dowels should be installed at intervals of about 50 centimeters, and then fix the rails on them. Moreover, if the wall is with obvious irregularities, then the recesses can be filled with wood chips or special wooden wedges of suitable sizes. It is worth noting that a wooden frame is best suited for finishing dry rooms.

The frame can also be created from a metal profile. This option is especially relevant for the bathroom, where there is constantly high humidity. During installation, an important point is the direction of the panels and the profile itself.

by the most modern version the frame is a plastic crate. In this case, the guides are attached to the wall using dowels. The clips are inserted into a special groove, and PVC is held on them.

When assembling the frame, it should be borne in mind that it is desirable to maintain a distance of 8 centimeters from the wall to the panels. This is necessary for the normal movement of air in order to avoid the appearance of too much dampness.

After creating the frame, you can mount the panels themselves. Installation usually starts from the left corner of the room. First you need to install the inner plastic corner, which has connectors oriented to the adjoining walls. After that, you should fix the upper and lower plinths.

Next, you need to attach the plastic panels to the surface and take measurements. It is important to consider that they must be inserted into the connectors of the lower and upper plinth. Measurements are best done with a tape measure and very accurately (up to a millimeter). The first panel must be inserted into the corner, and if necessary, cut the groove part with a conventional construction knife.

Then the desired length of the panel is cut off and inserted into the top plinth, after which it lower part bent and immersed in the bottom plinth. In the event that all measurements were made correctly, the panel will fit snugly and evenly. Now you can connect the grooves of adjacent panels and secure them using self-tapping screws or a stapler and staples. To remove the gaps at the joints of the panels, you can use silicone.

Thus, all panels are mounted. When the installation is completed, the molding should be installed. It is thanks to him that the finish will be more reliable and visually attractive. It is necessary to install molding elements around the perimeter and seams. You can make holes in the PVC panel for sockets, pipes or lamps with a simple clerical knife.

Can also be used to mount panels frameless method using glue. However, it must be borne in mind that it is not as durable as a frame one, and the walls should be carefully aligned for it.

It is worth considering that if the installation of the panels will be carried out by this method, then the surface should be primed in advance. For this procedure, it is necessary to use special solutions that are selected depending on the material of the walls.

When mounting panels on glue, it is important to choose a quick-drying glue (you can use “liquid nails”) that will not leave streaks, since it cannot be washed off. At the same time, it must be resistant to excessive moisture. The glue is applied with a notched trowel on the wall in large drops in a checkerboard pattern. Then panels are attached to it in turn, joining each other. It should be noted that with this method of installation it will not be possible to install recessed fixtures.

With the help of panels, you can also create window slopes yourself. You can also make a whole panel on the wall from PVC sheets or decorate an arch. Various crafts will only transform the interior and make it even more interesting. The original painting of the panels will also give originality to the room.

Examples in the interior

Numerous samples of interior design allow you to quickly choose the most suitable option. Today it is easy to find interesting options that will suit both the Provence style and the loft style. Very original design ideas can be realized using panels with photo printing.

The design of the hallway room with panels will be very interesting and bright. Moreover, you can choose bright PVC sheets with floral or abstract patterns that will look great against the background of wooden furniture. An excellent option for a spacious corridor will be panels with a picture, tinted with a not too catchy pattern. At the same time, it is best to give preference to bright and juicy shades so that the space seems brighter and more welcoming. For those who appreciate elegance and modesty, wood-effect panels will become an indispensable option for finishing the hallway.

For the bathroom, choosing an interesting interior is even easier. Panels with a pattern for small mosaics or marble look perfect. They fill the bathroom space with a special charm. And you can give them a little pretentiousness due to molding with golden and silver elements. Panels with 3D images maritime theme able to turn a familiar bathroom into a tropical oasis.

The kitchen area with cladding panels can look bright, practical and modern at the same time. For the main part of the walls (preferably the top), it is better to prefer a color that is not too catchy, but a smaller part can be lined with panels with bright pattern. At the same time, the working part can be highlighted in a different color, conditionally dividing the kitchen into a zone. As for the choice of colors and shades, everything here is exclusively individual.

Updated: 27.01.2020 16:55:44

Judge: David Weinberg


*Overview of the best in the opinion of the editors of the site. About selection criteria. This material is subjective, is not an advertisement and does not serve as a guide to the purchase. Before buying, you need to consult with a specialist.

In recent years, more and more Russian homeowners prefer special panels when decorating walls. This building material allows you to revive the interior, independently perform installation work, save money during renovation. Today in the domestic market there are products of different manufacturers. They differ in material, shape, price, etc. In order to choose the most suitable wall panels for a particular room, you should listen to the recommendations of experts.

How to choose wall panels

  1. Types of wall panels. Most often, buyers are faced with three types of wall panels. Rack products are produced in the form of planks 240-370 cm long, 12.5-30 cm wide, 8-12 mm thick. This finish is best for small spaces, the connection of individual elements occurs through spikes and grooves. Tiled panels are made in the form of squares measuring 30-98 cm. Such elements are fastened with glue or clamps. With their help, it is possible to create unique drawings. The largest are sheet panels. They reach overall dimensions from 1.22 to 2.44 m. It is best to use this finish in large rooms installation takes place in the shortest possible time.
  2. Base material. Everybody decorative panels consist of base and cover. PVC products have become the most popular. They are lightweight, affordable and moisture resistant. Fiberboard panels made on the basis of wood-fiber sheets are considered convenient to use. The outer surface is covered with a decorative film. MDF has become a popular material not only for making furniture, but also for decorating walls. A distinctive feature of this material is heat and sound resistance. Gypsum elements are considered one of the most environmentally friendly panels. They bring zest to the interior, while having an affordable price. Exclusive design indoors allows you to create a cork. This material combines lightness and environmental friendliness, it holds heat well and does not let in sounds. Only in damp rooms cork panels should not be mounted.
  3. Mounting methods. When buying wall panels, it is important to consider how they are attached. If the base has a perfectly flat surface, then you can use a special adhesive or liquid nails. Mounting fasteners are considered a reliable mounting option, but often require a crate.

We have selected 13 of the best wall panel manufacturers for our review. Their products are widely represented in the Russian retail chain, they have received high marks from experts and positive feedback from users.

What is better tile or wall panel

Cladding type

Advantages

Flaws

Tile

Strength and durability

Resistant to moisture and temperature extremes

Environmental friendliness

fire safety

High price

Complicated and lengthy installation

simple design

Wall panel

Affordable price

Rich assortment of patterns and textures

Simple and fast installation

Low resistance to moisture (with rare exceptions)

Limited service life

Not all materials are sustainable

Rating of the best manufacturers of wall panels

Nomination place manufacturer rating
Best PVC Wall Panels 1 4.9
2 4.8
3 4.7
4 4.6
5 4.5
6 4.4
7 4.4
8 4.4
The best MDF wall panels 1 4.8
Best gypsum wall panels 1 4.9
The best cork wall panels 1 4.9
The best fiberboard wall panels 1 4.6
2 4.5

Best PVC Wall Panels

PVC wall panels find a wide scope of application. Due to their moisture resistance, they can be used in all heated rooms, as well as in some buildings without heating. Experts highly rated the products of the following brands.

Forte

The leading European manufacturer of PVC wall panels is the Italian company Forte. For the high quality of products and a rich assortment, experts gave the brand the first place in our rating. Advanced equipment, strict selection of raw materials and strict control at every stage of the production chain allowed the company to achieve stable quality. Domestic consumers can choose finishing material from two collections, where there are about 20 different colors. In addition to wall panels, the company produces accordion doors, as well as sliding curtains for showers and baths.

Users speak flatteringly about the quality of wall panels, a wide range of decors, and durability. The only downside is the high price.

Advantages

  • high quality;
  • a wide range of colors;
  • durability;
  • stylish design.

Flaws

  • high price.

Venta

Since 1993, the Belgian company Venta has been operating on the European building materials market. The brand has become a leading manufacturer of PVC wall panels. Among the clients of the company are consumers not only from Europe, but also from the American continents, the countries of the former USSR. Since 2003, a branch of a Belgian company has been operating in the Moscow region, which is equipped with modern equipment and high-quality raw materials. Thanks to the location of the production site in our country, we managed to find the best combination of price and quality.

Russian consumers praise the products for an affordable price and beautiful appearance. The brand failed to get around the leader of the rating due to the fragility of thin panels. Therefore, cutting the material must be done with extreme caution.

Advantages

  • affordable price;
  • simple installation;
  • beautiful appearance;
  • color retention over time.

Flaws

  • thin panels break easily.

Deceuninck

One more Belgian concern got into the top three of our rating. The Deceuninck Group was founded in 1937, gaining the trust and loyalty of consumers from different countries. Today the company has 14 production sites, 22 warehouses and 3,600 employees. In our country, the interests of the manufacturer are represented by a division of Deceuninck Rus Ltd. The experts highly appreciated the socially responsible approach to the production of PVC products. The brand is associated with environmental friendliness, energy efficiency and innovation. In 2018, the concern's products became a laureate in the "Energy Efficiency" nomination at the "Innovations in Construction" exhibition.

Those consumers who have purchased systems exterior finish, celebrate the beauty and functionality of the finish. Users attribute the high price to the disadvantages of the product.

Advantages

  • environmental friendliness;
  • energy efficiency;
  • beautiful appearance;
  • convenience in operation.

Flaws

  • high price.

Vek PVC panels

the largest Russian manufacturer PVC panels is LLC "Vek". The company specializes in the production of interior finishing materials. Plastic is environmentally friendly, it does not emit toxic substances. The production chain uses German, Italian and Russian film, which has been certified and has necessary qualities. To give an aesthetic appearance imitation printing is used, and the uniqueness of the interior is ensured by author's developments.

Experts praised the two-layer lacquer coating panels resistant to mechanical stress. Users liked the affordable price, elegant appearance. But the fragility and persistent smell did not allow the brand to take a prize in the ranking.

Advantages

  • affordable price;
  • beautiful appearance;
  • a wide choice of colors and textures;
  • ease of maintenance.

Flaws

  • no significant ones were found.

One of the most high-tech enterprises in the world that produce PVC panels is the Chinese company Shanghai Zhuan. In the company's catalog you can find sandwich panels, blinds, aluminum products, etc. The Russian consumer is already well aware of PVC wall and ceiling panels, as well as accessories for them. The experts were surprised by the variety of colors, rich range of sizes. In this way, the manufacturer tries to meet the requirements of any customer. At the same time, the model range is constantly being updated, today panels with a 3D image, with holographic paintings imitating a mosaic, have appeared on the market.

Advantages

  • high-tech production;
  • spectacular design;
  • constant updating of the model range;
  • acceptable price.

Flaws

  • the smell of plastic;
  • inaccurate dimensions.

green line

In the Russian city of Kolchugino, the production of plastic panels with the Green Line trademark is located. A combination of many years of experience and modern equipment allows creating high quality products. The manufacturer uses only environmentally friendly raw materials from Europe and the USA, which do not support combustion. Experts attribute 100% moisture resistance, good sound insulation, and a wide range to the strengths of the panels. Using UV printing technology, unique patterns and logos can be applied to products.

Users speak flatteringly about the reliability and workmanship. There are complaints about the tonality of panels from the same series, it is not always possible to find the required dimensions.

Advantages

  • environmental friendliness;
  • moisture resistance;
  • UV printing;
  • affordable price.

Flaws

  • the tone of the panels from the same series is different;
  • poor range of sizes.

Aquaton

For more than 16 years, the Aquaton production company has been operating in the domestic construction market. The company produces a wide range of PVC and fibreboard finishing materials. Moisture-resistant panels, plastic products with acrylic coating, 3D effect, etc. are made at the plant in the Kursk region. The manufacturer managed to achieve a combination of lightness and strength through PVC foaming technology. The presence of modern equipment allows you to accurately imitate stone, tile or wood. So that the image does not wash off for many years, the surface is covered protective layer waterproof varnish. You can mount wall panels with glue or staples (in the case of a crate).

Positive consumer feedback allowed the brand to get into our rating.

Advantages

  • rich assortment;
  • ease;
  • strength;
  • affordable price.

Flaws

  • bad smell;
  • inaccurate dimensions.

Vivaldi

The history of the Vivaldi enterprise began 30 years ago, the first production site was built in Taiwan. In 2010, products with this trademark began to be produced in Russia. Experts included the brand in our rating for the unique design of textured films, fire safety and durability. Wall panels have a Russian certificate of conformity and meet strict hygiene requirements. The advantages of Vivaldi finishing material include moisture resistance, versatility, ease of installation, affordable price.

Users are satisfied with the quality of the panels, stylish appearance, ease of operation. The disadvantages of the brand include a modest color palette, a small range of sizes, and the lack of additional items for sale.

Advantages

  • versatility of installation;
  • moisture resistance;
  • durability;
  • affordable price.

Flaws

  • few colors;
  • small selection of sizes.

The best MDF wall panels

The scope of MDF wall panels is limited to dry warm rooms. With their help, you can make the room warmer and quieter. Experts most of all liked the products of one brand.

Aplast

A wide range of finishing materials is produced by the production and trading company Aplast. The domestic consumer is offered products made of PVC, MDF, HDF. The experts were especially interested in MDF wall panels. Decorative sheet materials are distinguished by their exact imitation of wood, brickwork and masonry. The manufacturer managed to achieve this effect by embossing. To connect individual panels into a single composition, there are special overlays. MDF interior panels will help to stylishly decorate the kitchen. High-gloss kitchen aprons with embossed and shimmer effect.

Users are satisfied with the combination of quality and affordable price, spectacular appearance, ease of installation and operation.

Advantages

Flaws

  • low moisture resistance.

Best gypsum wall panels

The high popularity of plasterboard finishes has made gypsum-based wall panels in demand in our country. Durability and reliability are complemented by environmental friendliness, which was noted by experts.

Artpole

Artpole 3D panels have become a new extraordinary project in the world of design. The company has focused its efforts on the production of gypsum wall coverings. They attract users with seamless connection, environmental friendliness and non-combustibility. Today, the consumer is offered various design options, accessories are developed specially for the order. The high quality of products is ensured by strict control at every stage of production. The products were appreciated not only in our country, but also in Belarus, Kazakhstan and Ukraine. The brand gets into our rating for high-quality and stylish products, which are sold at affordable prices.

Since 1999, the Portuguese company Egen has been producing finishing materials. Cork wall panels are of particular interest to domestic consumers. But the range is not limited to one type of finishing materials, the company produces ceramic tiles and sanitary products. Experts note a high level of quality that meets the requirements of international standards. Among the consumers are serious companies from Central and Eastern Europe. The brand got into our rating not only for excellent quality, but also for a wide choice of textures and colors.

Users praise Egen cork wall panels for their warm and cozy atmosphere indoors, unique design and environmental friendliness. The only downside is the high price.

Advantages

  • quality manufacturing;
  • environmental friendliness;
  • unique design;
  • a wide range of textures and colors.

Flaws

  • high price.

The best fiberboard wall panels

Low cost and ease of installation attract the attention of consumers to fiberboard wall panels. Sheets can be attached directly to the base or to the crate. But for wet rooms, experts do not recommend their use. Here the best manufacturers in this segment.

DPI

The American brand DPI is well known all over the world. The manufacturer specializes in the production of fiberboard wall panels. The company managed to take a leading position in the domestic market due to high consumer properties and democratic prices. The range includes panels with original interior solutions, which allows you to implement the most daring projects of designers. Thanks to unique technology the consumer is offered relief surfaces under the stone, imitation of brickwork and the fibrous texture of wood. Experts gave the brand the first place in our rating.

Users praise DPI wall panels for their beautiful design, high quality, practicality and reasonable price. Of the shortcomings, wetting is mentioned during prolonged contact with water.

Advantages

  • original design;
  • variety of textures and colors;
  • practicality;
  • quality manufacturing.

Flaws

  • low moisture resistance.

The Skano concern sells decorative fiberboard panels under the Isotex brand on the domestic market. Special attention The manufacturer pays attention to the safety of its products. Therefore, only natural raw materials are used in the production chain, which are combined into one Finnish technology. soft fibreboard, which is the base decorative material, plays the role of heat and sound insulator. The surface of the panels is covered with washable wallpaper, they are distinguished by a variety of colors and textures. Bonding is carried out using a water-soluble adhesive.

Advantages

Flaws

  • brittleness.

Attention! This rating is subjective, is not an advertisement and does not serve as a purchase guide. Before buying, you need to consult with a specialist.

Among modern finishing materials, plastic panels are very popular. And all this because they are light, hygienic, easily attached to walls made of any material, are not afraid of moisture and are not subject to decay. Plastic panels made of polyvinyl chloride (PVC) are made by extrusion, which gives them the necessary strength and rigidity. In this article, we will define the main criteria for choosing this finishing material.

Today, the industry produces a huge selection of plastic panels produced in Turkey, China, Russia and Ukraine, differing in appearance, color, gloss level and other characteristics. In any hardware store, eyes run wide from their abundance and variety, confusion sets in: so which panels to choose?

All panels are conditionally divided into ceiling and wall. There is no direct ban on the use of wall panels on the ceiling, and ceiling panels on the walls, but a slight finger pressure test unambiguously interprets that, having low strength, these panels cannot be used for wall cladding.

An additional distinguishing element is the length. Typically, ceiling panels are 6 or 12m long, while wall panels are shorter - 2.7, 3 and 6m.

The thickness of the ceiling panels is gradually reduced by manufacturers, before it was 8mm, then it became 7mm, now there are 5 and even 4mm, and wall panels are usually produced with a thickness of at least 10mm.

Many buyers consider the cheapest panels, but do not want to pay attention to the fact that a quality product cannot be cheap.

After all, the vast majority of Chinese plastic panels are made from low-grade raw materials, bad adhesives and varnishes. In the future, they will quickly lose their appearance and, most importantly, begin to release toxic substances, even the option of provoking an allergic reaction of the human body is not excluded.

So, you should purchase panels thoughtfully, comprehensively considering and paying attention to the following factors. The main types of plastic panels are:

    1. Plastic lining- used in the decoration of walls and ceilings, for fastening use special mounting brackets. Embossed panels quite often called clapboard, because they create an imitation wood panel"carriages".
    2. Plastic panels for tiles. It is advisable to use square tiles having a width of 30 to 98 cm.
    3. Sheet panels - resemble plywood. Their main difference lies in the installation - fastening is done with glue or nails. Joints are sealed with sealant or sewn up with rails that have the structure and color of the panels

From the point of view of room design, emphasis should be placed on the fact that there is a variety of color palette panels, allowing to satisfy any desire of the buyer.

All panels are conditionally divided into glossy, matte and semi-gloss.

Their technical characteristics are the same, and the difference lies solely in the surface layer. This is achieved by using a varnish that creates a layer of protective film on the front surface.

When choosing plastic panels, you must carefully study the following parameters:

    1. The thickness of the front part - a large thickness has significant strength.

    2. The number of stiffeners - the more, the stronger the panel. The external state of the stiffeners must be identical without visible deformations. A high-quality panel has more weight, which corresponds to its thickness and the number of stiffeners.

    3. The outer surface must be evenly painted, and viewing the stiffeners is not allowed. It is easy to check the quality of the panels - just press it down with a deflection of up to 50% and look at the result. There are no dents in high-quality panels, mainly due to the low content of chalk.

    4. Panels must fit snugly and firmly into the groove. The type of joint in the panels is seamless and embossed. The most common at present is seamless, but it should be called conditionally seamless, because even with the highest quality installation, the joint is still visible.

    Poor manufacturing or incorrect storage and transportation of plastic lead to its inevitable deformation and, as a result, to the impossibility of perfect joining of its parts.

Characteristic advantages and disadvantages of plastic panels

Like any material, plastic panels have their advantages and disadvantages. Let's start with the positives.

According to the manufacturers, all plastic panels are environmentally friendly, do not burn, have soundproof properties, light weight, good moisture resistance, durability, easy to clean and, moreover, are inexpensive.

The disadvantages of plastic panels are as follows:

    low strength, scratches, dents and chips remain on the surface (one sufficiently strong blow or strong pressure leads to a crack);
    panels have a limited scope;
    initially there is a specific smell;
    being universal material, plastic panels are usually used for interior decoration.

Installation of plastic panels

can be performed both horizontally and vertically and even at any angle.

They find their application in the decoration of loggias and balconies, and are also often used as ceiling material in the bathroom, hallway and kitchen.

Sewing walls with plastic is extremely simple, therefore, it is done by hand without any problems.

a) Initially, it is necessary to bring the temperature of the plastic panels closer to the temperature of the room - if they brought it from the cold, then let them adapt.

c) Walls with a high-quality dry surface must be sanded, in this case the adhesive will lie perfectly, therefore, the panels will last a long time.

d) Cutting panels is easy, using a hand saw for wood or metal.

e) For a good appearance, cutting and drilling of panels should be carried out on the front surface.

e) Take pictures protective film with plastic panels is necessary in the last step, as it protects the surface of the panel from cuts and scratches.

Finally, a video on the topic from Roman ...

Was this article helpful to you? Subscribe to site updates to receive the latest articles on renovation and interior design before anyone else!