Features of prestige doors made in Russia. Window opening limiter: types, selection, installation Window opening limiter long

Today, almost universally installed plastic windows. They are durable, functional, provide reliable heat and sound insulation. Increase comfort PVC double glazing, while making them safe for children and pets, window stops allow.

Peculiarities

The window stop is a design that allows you to slightly open the window, leaving a small gap and fixing the sash in a predetermined position. The device received the name "comb" for its external resemblance to a comb. It has several slots. A rod can be placed in any of them, which allows you to keep the ajar window in one position, and household members and pets not to get too close to the window opening.

The comb is installed on windows of a rotary type, that is, on those where the sash opens exclusively in the horizontal direction. In fact, the limiter allows you to open the sash like a window if necessary. However, nothing prevents installing a comb on windows with a tilt-and-turn mechanism. Its use will reduce the gap formed when the sash is opened in the vertical direction.

The design consists of a strip with slots and a window sash position lock (rod). The bar is mounted to the frame, the latch is installed in the window sash. By installing the latch in one or another groove, it is possible to slightly open the window within 1-10 cm. The opening angle depends on the length of the strip with grooves and the number of the latter.

The more grooves the bar has, the more precise adjustment of the sash position can be achieved. A standard bar is considered to be 10-12 cm in size with 4 grooves.

Limiter manufacturers usually list 2 main functions of the comb:

ventilation premises (especially relevant for windows that do not have supply valves, sashes that open exclusively horizontally);
protection double-glazed window from damage due to a sharp slamming of the sash due to a draft, strong wind.

Ensuring the safety of children and pets is another benefit of the restrictor.

By adjusting the position of the comb, the user has the ability to open the sash wider or narrower. Thanks to this, it is possible to achieve an optimal microclimate in the room, to prevent the formation of condensate on plastic double-glazed window without overcooling the room.

In this position, you can leave the window at least for the whole day (which is especially important in the warm season). By opening the window literally 5-15 cm and using the limiter, you will ensure optimal air circulation in the room. However, it is important to understand that the comb only fixes the window, but in no case is it a locking device. Residents of the first floors should not leave windows open and fixed with limiters when leaving the house.

In addition to the obvious advantages, the design also has “cons”, which are better to learn about before buying and installing the comb. Installation of the device requires additional perforations in the profile, which slightly reduces thermal insulation properties double-glazed window. The sound insulation coefficient is also reduced by 2-3 dB. Finally, the presence of holes leads to a decrease in the strength of the profile, possible violations of the geometry.

If we compare supply valves with limiters, then the latter, of course, lose to them in terms of their safety and functionality. The operation of double-glazed windows with valves is more convenient, but such products are more expensive.

Kinds

Boundary elements may differ in the number of slots. Standard models have 4 slots, but there are also 5 slot options. In addition, there are several types of combs.

outdoor

Designed for folding window sashes (for example, window vents). It has 3-4 grooves, fixes the sash during the ventilation of the room.

built-in

Invisible to the eye analogue of the outer comb. In terms of its functioning and the number of grooves, this option is identical to that described above. The difference is the greater aesthetics of the window, since the built-in limiter is invisible.

Continuous brake

Perhaps such a name will seem unknown to many, although, perhaps, everyone has come across such mechanisms for sashes. A permanent brake is usually installed on the doors of shops, offices. It is enough for a person to pull the door towards himself and open it. You don't need to close. Thanks to the built-in mechanism, the door will smoothly close automatically.

A similar system is mounted on the window, preventing the sash from spontaneously closing or opening too wide. Such a mechanism should not be pulled by force when trying to close the window, as it may break.

Cable stopper

Structurally, it consists of 2 elements, one of which is fixed on the frame, and the second on the profile. Between themselves, they are connected by a metal-based cable (sometimes in a plastic braid). There are models where the cable is replaced by a thin chain. The micro-ventilation function is realized due to the short (up to 20 cm) length of the cable.

Unlike a standard comb, it does not allow the sash to be fixed, but only holds it, preventing further opening of the window. At the same time, the cable stopper is stronger than the comb and can withstand a breaking force of up to 550 kg (depending on the model).

For protection against children and unauthorized entry from the outside, a cable restraint is more suitable than a comb. For ventilation, it is better to choose the latter.

When installed on swing leaves, the limiter can be mounted anywhere in the profile and frame, when mounted on tilt-and-turn structures - only in the upper part.

lock handle

This is the most effective limiter to prevent children from opening the window. It is a metal handle with shutoff valves. On its outer part there is a castle. Opening is done with a key.

Using the key, you can securely close the sash or give it a reclining position. In my own way appearance such designs are indistinguishable from conventional handles. The inconvenience is the need to preserve the key. To do this, find a place inaccessible to children. The use of a key is also provided for by waybill and mortise locks, as well as a wrap-limiter and blockers for sliding windows.

Depending on the material used, there are also several types of combs.

plastic

This is the most accessible type. It may have multiple options. color finish, goes well with PVC designs. The basis is ABS (impact-resistant) plastic. The standard number of grooves is 3-4.

Among the shortcomings, one can single out the lowest strength indicator and, accordingly, a shorter period of operation. It is not recommended to install such products on windows facing the windy side, since under heavy loads they can deform and burst.

metal

Metal combs are stronger and more durable, and therefore have a higher cost. It is important to consider that the metal of the product must have anti-corrosion protection. best material for the manufacture of the structure is considered brass. To protect it from corrosion, a zinc layer is required. Usually such products have 4-5 teeth. The color range is very wide (copper, golden, silver, gray shades).

Combined

Such a device includes 2 materials at once - plastic and metal. As a rule, the latter serves as the basis for the latch, while the comb is made of plastic. The number of teeth can vary from 3 to 5. White products of this type are more often produced. Sometimes you can find brown combs designed for windows with a wood-like profile. Color options are usually made to order.

Depending on the type of installation, limiters are distinguished that are mounted under the sash handle, as well as analogues that are installed at the end of the window sash.

How to choose?

You can buy products in specialized stores, household supplies departments, as well as from specialists involved in the production and installation of windows. It is better to give preference to designs made of durable materials simple shapes. This will increase the durability of the limiter, reduce the risk of breaking off its individual elements.

It is important that the limiter matches the design features of the double-glazed window and the operating conditions.

For example, on balcony doors it is better to install mechanisms of the included brake. For overall windows, as well as roof windows that open up, you should choose only metal limiters of increased strength.

If the active operation of the double-glazed window and its frequent opening / closing are expected, it is better to give preference to a mechanism with a lock and a key, rather than a conventional comb. Then the device will last longer.

The cost of products ranges from 100-500 rubles. It depends on the material of manufacture, the manufacturer, the number of grooves. The most affordable are plastic models, the more expensive ones are metal and combined. Also usually combs with big amount grooves have a higher price.

How to install?

Installing the comb will take literally 5 minutes. The process does not require professional skills, all the work can be done by hand. You will need the following tools and materials:

directly window stop, which includes the comb itself, the retainer and brackets;
self-tapping screws, which are usually also included in the kit (you can pick them up yourself, the main thing is not to take fasteners whose length is more than 12 mm, otherwise it will damage the profile);
screwdriver or screwdriver;
a knife (construction or ordinary kitchen), with which you will need to pick up the plug;
pencil or washable marker for marking;
drill.

You can set the limiter in several stages.

After preparing everything you need for work, drill several holes in the window using a drill. With this tool you will get perforations without damaging the profile plastic. If you neglect this stage and try to immediately screw in the screws, you will not be able to avoid cracking the profile material.
Rotate the cap at a right angle. To do this, find a special groove on its surface, pick it up with a knife and turn it 90 degrees. Once the procedure is completed, 2 bolts will be found under the plug. They need to be unlocked.
Note the position of the window handle, then remove it. It will help to avoid confusion by giving the handle the same position that it has when the window is open, that is, the handle should be perpendicular to the vertical of the window.

Place the limiter bracket in the profile space so that it is later under the window handle. Perforations for screws should be visible in the bracket holes. After that, the handle is installed on the bracket, that is, it returns to its original place.
Take the latch, align it with the axis of the bracket (it must fit correctly into the grooves). Having determined the optimal position of the latch, you should make the appropriate marks on the profile.
In the marked places, 2 holes are made using a drill with a thin gimlet. Then you can fix the limiter using self-tapping screws. After that, the installation is considered complete.

A slightly different way is to install the latch in the end of the sash. This type of mounting allows the comb to be located anywhere on the fixed part of the frame. To fasten the latch, use a long self-tapping screw so that it can pierce both internal jumpers of the end part of the sash (it is also called overlay). Only in this case, you can count on the reliability of fastening. As with the previous method, it is important to pre-drill holes for the screws, and then screw the fasteners into them.

Installing a limiter in the end of the sash is usually an alternative. It is resorted to if there is fittings under the window handle or opposite it, due to which it is impossible to fix the latch.

It is important to note that the window stop installed in the overlap of the sash can only be used for plastic windows. Its use in a wooden profile threatens to crack the wood in the direction of its fibers.

With this method of installation, the risks of breaking the tightness of the double-glazed window and deforming the frame are minimized.

Manufacturers

Among the manufacturers of window restraints, products are trusted by buyers Penkid. These are cable restraints made of steel, the strength characteristics of which are admirable - they withstand pressure up to 550 kg. They cannot be broken, cut with a knife or eaten with pliers. The cable length is 200 mm.
Unsurpassed German quality is demonstrated by Roto limiters. On some of them, the manufacturer gives a 10-year warranty. The plastic stops for this trademark completely safe from the point of view of environmental friendliness, and metal ones have multilayer protection against corrosion.
The fittings of another German brand are characterized by high reliability. Reha u.

Previously, various objects or crumpled paper were placed under it to fix the door. However, progress flies rapidly, and today no one uses sheets of paper to hold the door. And along with such door fittings as handles, latches and hinges, as an alternative to the well-known door chain, special door opening limiters are widely used, which allow the sash to be slightly opened to a predetermined distance.

The need to limit the opening of the door

Limiting the opening of the door with the help of special latches can be useful in various cases, most often when it is necessary to rationally plan the space in the room and ensure the safety of opening the door. In a similar way, it is possible to protect not only the door leaf, but also furniture and walls from damage caused by excessively strong opening of the door, as well as prevent injuries, which can be provoked by a sharply slamming door from a draft.

Sometimes it becomes necessary to fix the door in a certain position, for example, if you need to bring a large object into the room or ensure the unhindered movement of large groups of visitors. Often this is necessary when the house has Small child, which inadvertently can pinch its fingers or hit the doors. It is also to some extent protection against hacking.

Especially relevant is the use of special latches where they are installed at the entrance double doors, which in open position not easy to hold at the same time. Let's say in suburban buildings it is often customary to install two input structures - steel and glass. The first door can be fully opened during the day, held in a predetermined position by a latch, and the glass sheet is used at this time as the main protection and an additional source of illumination.

Types of door opening limiters

Door opening limiters are presented on the market of door fittings in a wide range. Each manufacturer strives to make them in intricate designs, polished, chrome, silver or gold, as can be seen in the photo of the door opening limiter. When choosing a door latch, it is advisable to select it in harmony with the fittings already present on the door.

Floor stops

Exists different types stoppers that are installed on the floor. Some of them are able to hold the door leaf in a given position, others simply do not allow it to swing open enough to damage standing pieces of furniture behind the wall or wall decoration. Among them are mobile and stationary products.

Stationary floor models include:

Magnetic retainer. The principle of its operation is quite simple: in the lower part, a small metal plate is screwed onto the door leaf, and the stopper itself with a magnet is attached to the floor in the place beyond which the door should not swing open. Such a plate, when the door is opened, is magnetized to the stopper and fixed in this position.
Door stop. This is the simplest product, which by itself does not fix the door, but at the same time does not allow it to open more than necessary.

Mobile floor clamps are much more diverse:

The most common door stopper in the open position is an ordinary wedge that has a non-slip base and can be made in the form of a figurine toy.
Another type of floor stopper is a device that is put on the lower end of the door, and its legs, which are non-slip, rest against it on both sides of the floor.

To close or open the door, just press the floor limiter with your foot interior door, thereby releasing it from the groove. There are other configurations of similar devices on sale, but they all work on a similar principle.

Wall restraints

According to their purpose, wall clamps are divided into slamming and swinging door limiters. Door swing limiters are small parts various forms and styles that are attached to the wall with screws and do not allow the door to beat against it. Such devices are simple and magnetic. Their installation is justified in the case when you do not want to spoil expensive parquet with floor stops, or if a “warm floor” system is equipped under your floor covering.

More functional are such open door stoppers that are attached to the upper casing. The tilted design does not prevent the door from closing, but if you turn it down 90 degrees, it will create an obstacle for the door to close completely. However, we want to reassure you: do not be afraid that wall or floor opening stops will damage the door trim. They are made from soft materials or equipped with a rubber pad at the points of contact with the door leaf.

Overdoor restraints

If you only want to protect your pets and children from a slamming door, then you can put a C-shaped limiter on its side or top end, which is made of elastic plastic, rubber or other soft material.

If you need door leaf hold at the right angle, then you should pay attention to the door opening angle limiter, which consists of a metal case that is screwed to the door, as well as a brake shoe. In order for the brake shoe to slide out and the door to be locked from opening, you just need to press your foot on the pressure pedal. To remove the fixation, it is enough to lift the brake shoe by pressing the lever.

Locking Device Limiters

When it is necessary to restrict access to a specific room, as a rule, fixators of locking devices are installed. Locks are rarely installed on interior doors. If in the room it became possible to restrict access, for example, to the bathroom, then it is customary to choose door handles with a stopper. Such handles are equipped with a latch that holds the door in the closed position with a tongue that enters the hole in a special striker on the box. No less popular are magnetic latches.

For entrance doors, latches are placed so that it is not possible to open the door from the outside with a key. Entrance doors often tend to slam shut at the most inopportune moment, for example, when you decide to take out the trash. Magnetic opening limiter front door it will not allow this to happen, since it holds the tongue of the lock inside the mechanism. For an interior door, closing stops perform a similar function - nozzles on the door or pegs under the bottom of the door.

Door stop material

On store shelves huge number door fasteners. The price of door opening limiters often depends on the material from which the device is made. Steel, aluminum, steel alloys, brass, plastic and wood can be used for the production of door clamps. The stronger the raw material from which the latch mechanism is made, the more it can withstand a greater load.

If the latches are designed for a massive and heavy door to the living room or bedroom, you should buy stable metal mechanisms. If you want to make the door to the bathroom functional, it is enough to choose a plastic limiter, which conditionally makes it clear to guests or household members that the room is occupied. If you want to protect children from accidental finger bruises, then you need to buy plastic or rubber door stoppers.

If you plan to prevent the front door from swinging open, you should opt for metal latches. In addition, they must have a strong magnetization that can stop the movement of a massive door leaf. For light interior doors, magnetic latches with a lower magnetizing force are intended.

If you have to protect furniture sets and finishes from a strong swinging of the door, it is better to choose wall latches that stop the door from the wall at a certain distance. So that the door trim is not damaged, it is worth choosing limiters made of soft materials, for example, rubber, or latches with soft pads.

It turns out that the door opening limiter is very useful thing. It will protect your furniture, wall decoration, and the door leaf itself from damage when the door is suddenly closed. In addition, your children will be protected from accidental injury.

Sections of the article:

This little accessory is not such a useless contraption as it might seem at first glance. Often, many people open interior or front doors from all over. Sometimes this can lead to backfire. For example, someone put a dear behind the door glass vase, or a child hid behind it. In addition, the pen may scratch the wall finish. The door opening limiter is a necessary accessory. It allows you to keep an attractive appearance of the door and wall.

Purpose of limiters

There are a huge number of situations that require the presence of such a limiter. So, the door is fixed to exclude its independent opening or closing. This is very important in families with small children. Children through negligence and inexperience can be injured varying degrees heaviness, bruises, cuts, pinched fingers from the door, which suddenly slammed shut due to a draft.

Another situation where you simply cannot do without a door opening limiter is a large number of people who must enter the room, which is even more important if the door is the entrance.

Where are restraints used?

Often, these small parts of door fittings can be found in office space, shopping malls, administrative buildings, restaurants, and of course, in residential apartments. These small products are relevant wherever doors are used frequently and in different ways.

Limiter Capabilities

As you can see, this is a fairly simple device, but it is used almost everywhere. This can be explained very simply. This part performs simple, but nevertheless very important functions.

So, the limiter can keep the sash open, protects pieces of furniture from mechanical damage due to blows from the door handle during sudden opening. Also, with the help of these parts, you can use the doorway as an additional source of light. Another functionality is fixing the sash at a certain angle. In this case, the value of this angle can be different. This is true if you need to carry any large object through the opening.

In addition, the product is practically indispensable for double metal door structures that play the role entrance group in country houses. It is also believed that the element can provide anti-burglary protection. In addition to practical functions, these details also solve decorative tasks. There is a wide range of these products in various shapes and colors. You can pick up a unique copy that will perform useful functions and decorate or complement the interiors of the home.

Classification

There is a certain classification of limiters. This will facilitate the purchase of such products in the store, since thanks to it you can easily explain to consultants what exactly you need.

These products are classified as follows. So, at the place of installation, floor, door, and wall parts are distinguished. According to the principle of operation, the elements are divided into magnetic, mechanical and simple.

If you know information about the types and functional features of each product, you can easily choose a latch. To understand what is needed, you should familiarize yourself with the types of door opening limiters in advance.

Floor fixings

These elements are mounted directly on the floor. These fasteners are manufactured in various variations. Some models are able to hold the canvas only in a given position, while others do not allow the door to swing open much, thereby protecting walls or furniture.

Floor parts are of two types. This is a stationary floor limiter for opening the door and a mobile latch.

Stationary products are made in the form of a magnetic stop and limiter. The latch with a magnetic system consists of two structural element. This is a small metal plate that must be fixed at the bottom of the door leaf and the magnet itself. It is fixed in the place where it is necessary to stop the door. When the canvas opens, the magnet attracts the plate and securely holds the structure.

The simplest floor products that are designed to work with interior doors are made for other tasks. These details do not fix the sash in any way, but simply do not allow the canvas to open wider than necessary.

Mobile elements for fixing the door leaf are also produced in several forms. The simplest floor limiter for an interior door has the form of a wedge with a rough base. Many products of this kind resemble toys or various figurines. Another type is a stopper, which is put on the lower end of the door leaf. A feature of this product is non-slip feet, thanks to which the canvas is securely held in the desired position.

Except design features, each retainer and limiter is different in design. Today it is not at all difficult to choose a detail that will be in harmony with the door leaf, wall decoration and floor.

wall stops

All those stops for wall mounting that can be found in hardware stores can also be divided into two types. These are devices that limit the opening angle and mechanisms that limit the slamming of the door.

Elements that belong to the first type are fixed to the wall using various fasteners. These devices reliably protect the wall surface and any interior items next to the canvas from mechanical shock.

Such products can also be magnetic or conventional. Installation is recommended when the owners country houses or cottages do not want to spoil the expensive flooring. Moreover, floor clamps cannot be installed if heated floors are installed in the room.

Has more features wall limiter for interior or any other door, which is fixed on the top of the casing. When it is inoperative, it does not prevent the canvas from closing. But one has only to turn the device 90 degrees and it will not allow the canvas to close completely.

Overdoor clamps

For families with children or pets, these products are very relevant. They reliably protect children and animals from the door, which can slam shut at any moment. To do this, a special stopper is put on the side end of the canvas. Often, this small device is made of plastic or rubber. It will not damage the door trim and will protect the wall and children.

In order for the leaf to be in the open state and at the same time in a certain position, for this it is necessary to install a limiter for the opening angle of the door. This special device, which is a metal case. This body is installed directly on the canvas. Also included is a brake pad.

To fix the door in a certain position, it is necessary to apply force to a special lever. To remove the fixation, so that the canvas can close and open again in the normal mode, it is necessary to lift the brake shoe.

Other types of restrictors

Door stops - very important detail. But the limiter for furniture doors is no less important. It allows you to prevent excessive opening of the sash, which can harm the hinges, body, adjacent doors, walls. If done right choice With this product, you can significantly secure your home and life.

The stopper, designed for door handles, is able to restrict access to the room without the use of any locking mechanisms. There are two types of execution of such door accessories.

The first type is a mechanical latch. The special handle has a special latch that can fix the door in the same way as a lock. The second type is a magnetic stopper. Such systems are used for doors to toilets and bathrooms, parental bedrooms and other rooms. The device of these products has a special rotary button. It helps to securely fix the doors in the closed state inside the room.

materials

The cost of door openers can fluctuate greatly. The price primarily depends on the materials that were used in the production, and only then, depending on the mechanism that performs the fixation.

Among the most popular are steel, various steel alloys, plastic, aluminum, wood. How more expensive material, the more durable the product will turn out, and the longer the service life will be. In addition, the reliability of the design is significantly increased from high-quality material. This is true for all products except over-door. They are made from soft materials. Here quality material is elastic.

Which material to choose does not depend on taste. If there are children in the family, then the most the best option plastic products or rubber. If the door leaf is massive, then it is better to use metal accessories. It is also better to install a metal opening limiter for the front door. Wall fixings should be predominantly soft.

Magnetic systems will be relevant if it is necessary to firmly fix the canvas in the open state. The strength of the magnetization in this case depends on the weight of the canvas.

Mounting

The door opening limiter for the floor is mounted in several stages. So, at the first stage, prepare necessary tools. This is a puncher, drill, screwdriver and a marker, or a pencil. When buying a product, it is important that it is equipped with special fasteners.

The second step is to find a suitable location. The main thing here is to choose the right place. To do this, open the door leaf and then fix it in such a position that approximately 5 cm remains from the door to the wall. At the same time, it is also ensured that from the door to the wall there is no less than the length door handle otherwise the emphasis will not work. If the product will be installed in the passage room, then it is fixed as close as possible to the wall.

Next is the marking stage. At this stage, mark the place where the device will be placed. Then two holes are drilled in the floor - one for the dowel, the second for the pin. A dowel is hammered into one of the holes and the products are installed in this place. It is important that the pin also sits in the second hole. Then you can fix the element.

Limiters are very useful and practical products. They protect walls and furniture, and you don't have to worry about children's fingers or pets.

Window sash opening limiter (aka "comb", aka "crocodile") is a window ventilator. It consists of two parts - a comb (a small bar with recesses) and a retainer. The latch is mounted on the movable sash of the window, the comb itself is fixed on the frame. Please note that the window comb simply fixes but does not lock the window.

Combs are used for controlled ventilation of the room on PVC or wooden windows. They provide the possibility of fixing the sash in 2 planes: vertical and horizontal.

Plastic comb (installation under the handle)

There are options available:

Plastic comb with 4 positions. Length - 10 cm.

Plastic comb for 5 positions. Length - 12.5 cm.

The window opening limiter comes with painted fasteners installed under the handle of a plastic window.

Materials from which the comb for plastic windows is made:
- metal part under the handle made of painted galvanized metal,
- the case - from high-strength ABS plastic.

The principle of operation of the comb

The comb window limiter is the most economical option for limiting the opening of the sash.

The principle of operation is very simple: depending on how much fresh air you want to provide, the size of the gap between the sash and the frame is selected, the slotted bar is thrown over the protruding pin of the latch.

The window comb can be installed on any plastic windows from any profile. And not just on the windows! The comb can also be placed on the balcony door.

Why do you need a window limiter "comb"

The window sash limiter in the form of a comb (crocodile) is needed to limit the opening of the window sash. A window equipped with a comb can be easily fixed in the open and ajar position. Fresh air will enter the room through the resulting gap between the frame and the window sash. In this case, the comb will provide a rigid fixation of the sash in the position you need. This avoids strong drafts when airing the room, which is especially important in winter.

In addition, if you have pets like a cat that love to sit on the windowsills and look out into the street, then you simply need such a limiter. Through a narrow gap left by the limiter, your beloved animal will not be able to climb onto the ledge and leave you.

Comb sash opening limiters allow you to leave the fixed window sash unattended, without fear that the window will open with a gust of wind.

Advantages of a comb

low price
easy installation - no special skills required for installation
installation "under the handle" allows you to put the limiter "comb" both on plastic and on wooden windows
the ability to choose the appropriate color - white or brown - depending on the color of your windows.

How to install a comb

To install the comb on the window, you must have at hand: at least one comb, 2 screws, a screwdriver.

If you forgot the screwdriver in the garage, you can use a regular screwdriver, as shown in our series of photos.

To install the comb on the window, you must first remove the handle from the window sash. To do this, turn the cover and unscrew the handle screws. One screw on the top and one screw on the bottom.

Then install the counter part of the comb with the rod on the handle.

Put the handle back in place.

Attach the comb itself to the box opposite the counterpart, located on the window sash under the handle, and mark the place of the self-tapping screw with an orange felt-tip pen.

Secure the comb with two self-tapping screws and a screwdriver (screwdriver). Since the combs can be installed on plastic, wood or aluminum windows, self-tapping screws must be purchased independently, based on the material of the window, they are not included with the combs.

As you can see, installing a comb on a plastic window is the process is easy and takes very little time.

Trademark "Doors Prestige" supplies interior doors of various content and production method. All products meet the requirements of GOST.

Features of the company's products

Prestige LLC (production is based in Pushkin, Leningrad Region) is one of the largest interior door manufacturers in the North-West region of the country. There were difficult periods in the past activities of the company, but now, thanks to the creative activity of employees and highly qualified management, the company's products are distinguished by excellent consumer properties and design variety. Therefore, it is constantly in demand in the relevant market segment. Doors Prestige is always a symbiosis modern forms and proven quality over the years.
The main products of the enterprise are veneered interior doors, although the manufacturer also produces metal-plastic windows, moldings and accessories for their products. The manufacturer works closely with the Ankor sales and service company, which provides not only the necessary distribution services, but also delivery, installation and monitoring finished products.
The production of door products, which is located in Pushkin, is equipped with first-class equipment, and the North-West of Russia has been famous for its skilled workers since the time of Peter the Great. All these components eventually became the prerequisites for a constant increase in the popularity of the Prestige Doors trademark.
Door products manufactured in Pushkin are produced in the following range:

Panel interior doors with veneer trim of various textures and colors (wood of oak, walnut, maple, pear is used).

Paneled interior doors (finish - walnut and cherry).

Thanks to the feedback established by Ankor, the Prestige trademark constantly updates and corrects the lineup manufactured products. The manufacturer's products are produced in strict accordance with the requirements of GOST 6628-88:

The company also manufactures products individual orders, formed by the trade and service company Ankor in accordance with demand and consumer feedback.

Distinctive features

Manufacturer combines various ways filling the door leaf than achieves high efficiency the use of materials and, consequently, the low price of their products. Most often used:

Solid filling with wooden blocks and / or chipboard strips;

Filling voids with the same components as above;

Filling voids with veneer;

Filling with plywood or fiberboard.

High-quality filling provides the manufacturer's products with high sound and heat insulation performance, which is noted in reviews of products manufactured by the brand.
The assortment is especially wide in the section "Panelled doors". LLC "Prestige" produces several series of them: Classic, Retro and Modern. At the same time, it provides wide opportunities design and operation.
Two-color version of the door leaf on each side of the interior door. This greatly facilitates the subsequent color and decorative solution of the interior, especially for rooms with different purposes, for example, for an entrance hall and a living room, a corridor and a bedroom.
Manufacturing door panels supplied with mirror inserts. To improve the strength characteristics of the product and its operational durability, options are used both with tempered glass and with special coatings on the surface of the mirror. protective films. Mirror inserts can be placed on both surfaces of the product or on one of them. The surface of the mirror for a number of series is decorated with artistic drawings, the nature of which can always be chosen according to taste, focusing on the catalogs provided by Anchor.
In order to ensure good ventilation of the premises where the products of Prestige LLC are installed, door leafs can be provided with ventilation openings. From this, the aesthetic appearance of the doors does not suffer. A variant of the lower location of such holes is also possible. This is very convenient when cats or small breeds of dogs live in an apartment or a private house.
Glass inserts are also very popular, and the glass can be both transparent and tinted. A number of models are equipped with frosted glass with artistic engraving, and the pattern can be either on one or both glass surfaces. This performance significantly improves the artistic impression of the product, which is recorded in numerous positive reviews about it.
The company has mastered the production of products with combined transparent Triplex inserts, which are two layers of tempered glass, and a special translucent adhesive is placed between them. This option significantly increases the strength of the door and security under various emergency conditions. Additionally, noise protection indicators are increased. Judging by the information of the company Ankor, the demand for such a product is constantly growing.

Decorating fireplaces with artificial stone

Innovation in the production of basic elements

In the manufacture of door panels, the company uses carefully prepared pine wood, freed from the natural defects of natural wood. This provides the manufactured goods with high durability and resistance to decay. In order to avoid warping of the material, it is hot glued under pressure using high-strength fiberboards. Characteristically, toxic adhesive compositions are not used for joining, and gluing is carried out by lignin released from wood when it is heated to temperatures above 100 ° C. Thus, it is guaranteed high degree environmental friendliness of products.
For surface finishing, the company uses not only veneer, but also fundamentally new compositions: German-made thermoplastic PVC material, as well as Cortex coating, which successfully imitates the structure of natural wood.
The peculiarity of the composition lies in the fact that with its help an optical 3D effect of the spatial structure of the tree structure is created. Coatings are highly water-repellent, which provides products with good operational stability. In particular, doors with the types of coatings described above can be installed in kitchens, bathrooms, etc.

The Ankor company constantly updates product catalogs from the Prestige Doors trademark, so a potential consumer can always be well informed.