Types of fastening for horizontal blinds. Blinds: what type of fastening to choose and why? Fastening roller blinds

There are many types of light-protective sheets, but they have common features. All of them consist of a metal tube-roller, or rod, on which fabric is wound: bamboo or cotton material. The length is adjusted using a chain that is attached to a rotating mechanism on one side of the roll.

Usually at the bottom of the curtain there is a steel or wooden weight bar that protects it from deformation, allows it to hang evenly and fit tightly to the glass. The latter is achieved using a pair of small magnets that are glued to bottom part frames and attract the weighting agent, if it is metal.

You can take a more complicated route and thread a fishing line through the guides, which will hold the roller shutter during wind fluctuations and opening in the “window” mode. It must first be threaded into the upper fasteners several times so that when tensioned it does not pull out. Unwind it all the way and insert it into the special eyelet on the weight bar. At the bottom of the frame, attach small corners with holes for fishing line. Pull it there, tie it, cut off the excess.

Sometimes manufacturers install a spring inside the shaft. In this case, there is no need to fiddle with the cord with your hands to open or close it. It is enough to pull the plumb line located on the bottom bar with a little effort.

Dimensions

They are different. The length can reach 1.5 m. The standard width is 50 cm, but there are models 30 cm, 150, and more. Very small roller blinds, designed literally for one double-glazed window, are called “mini”. Sometimes they are hung together with ordinary curtains, especially if you need to combine two tasks: to shade the room as much as possible.

Kinds

Open

They are also called classic. The shaft on which the roll is wound is visible to everyone, but this does not spoil the interior. Moreover, there is a significant plus. The crossbar can be shortened if you have the right tools. The canvas itself can also be adjusted to fit the opening if you made a mistake with the dimensions or simply didn’t find the perfect one in the store suitable option.

Open structures are most often installed on small ones. Those that can be hung without drilling the frame have PVC clips on both sides of the top edge; they have holes into which both ends of the metal rod are then inserted. These clamps are held on fasteners that are pre-drilled to the wall with screws.

Models that require mounting directly on the frame can be mounted either with self-tapping screws or Velcro. The first option is the most reliable, but it’s not suitable for everyone: the warranty on double-glazed windows expires or you don’t want holes to remain on the crossbar after removing the decor. The second method is especially good for “mini” type products, which, due to their low weight, can be held for years on corner clamps that are placed on the open sash.

Cassette

They, like open analogues, can be different sizes, including “standard” and “mini”. You can also fix them using self-tapping screws or double-sided tape. They differ from the previous category in appearance: the textile roller is hidden in a compact plastic box located on the frame. And they are not attached to the wall above the opening - it’s clean. They cost more than the first type, but they look neater.

Cassette varieties, both with and without a spring, are mounted only on glazing beads, and not on the entire opening. They are particularly demanding in terms of measurement accuracy. Otherwise, the cassette will not fit or the rod will not be enough to “catch” the opposite edges of the sash. Please note that when unfolded they cover about half of the window sill. Therefore, if it is occupied by flowers or other decor, it is better to choose a system that is installed above the opening. Otherwise, it will not be possible to fully expand it.

Degree of transparency

The material for making roller shutters is most often dense fabric. It can be cotton, synthetics or mixed materials. The degree of transparency varies depending on the fabric. Based on this feature, three types of roller shutters are distinguished; they are presented in the table.

Relatively recently, an interesting variety has appeared, with the ability to regulate the degree of illumination of the room. It is called a day/night or zebra roller blind. These are two panels, each of which is assembled from strips of transparent and light-proof fabric. The strips move one relative to the other, either completely darkening the room or allowing access to the sun's rays.

Materials for making roller shutters are impregnated special compounds, therefore they repel dirt, do not attract dust, and do not become electrified. The finishing of the panels can be very different. Photo printing has been especially popular lately, which allows you to create very interesting solutions for interior decoration.

Roller blinds for plastic windows

Installation sequence:

We outline the locations of the fasteners.
We drill holes, put the side clamps in place, and secure them with self-tapping screws.
We put the roller with the cloth in place and close the plugs.
We prepare the guides for installation, remove the protective tape from the self-adhesive layer. Lower the curtain by 20-25 cm.
We place the canvas under the guides and carefully glue them in place.
We install limiters on the chain mechanism or a decorative weight on the weight bar. We check the functionality.

Installation of cassette models

First apply the markings.
Using a level, adjust the “horizon” of the location of the roller shutter.
Drill holes at the marked points.
Using self-tapping screws at the top of the glass unit, screw the box with the roll rolled up inside it.
If you don't want to make holes, use tape at least a millimeter thick. But first, work some magic on the markings so that the box hangs evenly.

Fastening roller shutters “mix”

Models that can be opened not only from the bottom, but also from the top are becoming very popular. We'll tell you how to hang them. Measurements are taken along the outer edges of the beads: both in width and height. This will be the perimeter of the fabric cut, and the whole product will be 26 mm wider due to the box. The package includes a fishing line that needs to be cut in half.

Installation sequence

We stretch the end of the fishing line into the hole of each fastening and tie it with a double knot.
Using self-tapping screws, we fix all four fastenings (a pair of lower and upper ones) to the glazing beads.
We insert the line first into the lower bar, then into the upper one.
We thread the free ends of the cable into the holes of both upper fasteners.
Tighten the fastening clamp with a screwdriver, slightly tensioning the fishing line.
We stretch the fishing line to the lower fastenings and fix it there.
Trim off the excess cord.

That's it, the fabric cassette can move up and down, revealing the panorama of the street the way you want. The box can also be made motionless by screwing it to the frame through special holes. Whatever installation option you choose, remember that the control chain needs to be moved away from children’s hands if there is a child in the house. Install the holder for it at such a height that the baby cannot reach it. We invite you to watch a video on how to secure roll

Roller shutters are a good solution for any interior. They are practical, beautiful and allow you to effectively regulate the level of illumination in the room. Night/day roller blinds are especially good for this. For those who do not want to give up traditional curtains, we can recommend using them in combination with rolls. The result is very interesting and functional combinations.

Material prepared by: Natalya Utochkina

If you are going to do all the work yourself, without the help of a specialist, it won’t hurt to first get full information how to install horizontal blinds on plastic windows, so as not to get confused in the process, but to clearly perform all the necessary actions.

This is why you are provided with these instructions so that no problems arise during installation. Be attentive and careful, and most importantly, do not rush, everything must be done with clearly controlled movements, especially if you decide to drill the profile of the sashes or window frame.

Materials and equipment:

There is nothing complicated here, as you will see for yourself, but it is worth following the necessary sequence, and for starters, at least acquire all necessary equipment and equipment, without which it will be not only difficult, but completely impossible to cope with the matter.

Themselves, previously purchased, unpacked and assembled as needed, are horizontal blinds that are exactly the right size for your purposes.
Hammer.
A tape measure no less long than the widest or highest point of the window opening.
A level with which you will need to check the horizontalness of the top cornice strip.
Pliers.
Pencil or marker for marking.
A set of screwdrivers, and possibly also special tool for twisting parts of blinds.
Drill or hammer drill to make special holes for curtain fastenings.

Installation of horizontal blinds on PVC window sashes

With this installation method, the blinds are attached with small self-tapping screws (included in the kit) to the window profile. They must be installed so that they do not interfere with the handle turning. Be careful: if you drill too close to the bead, you can damage the glass unit. Therefore, in this case, correct measurements are very important.

Installation of blinds on a PVC window

Installation step by step

The procedure is as follows:

We install the fasteners on the cornice so that they do not interfere with the moving parts inside.
Let's try the product on the frame. We set it so that the lamellas overlap the drain frame and the right at the same distance.
Mark with a pencil or marker the place where the fasteners should be located. During this operation, you need to keep the cornice as level as possible. You can follow the contours of the window frame or use a level.
Although the plastic is quite soft and you can immediately screw self-tapping screws into it to prevent the frame from cracking, it is better to pre-drill the holes. The diameter of the drill is slightly smaller than the diameter of the screws. Usually the kit comes with self-tapping screws with a diameter of 3 mm, so you need to take a 2 mm or 2.5 mm drill.
We take the brackets and fasten them to the frame with self-tapping screws. Screw in the self-tapping screws
Insert the blind rod, pressing until it clicks.
We close the ends with the plugs that come with the kit.

Having to drill holes in a window frame can be intimidating, but it's no big deal. In case of incorrectly made holes, the unsuccessful ones can be filled with sealant. White silicone, not acrylic (acrylic quickly turns yellow). The performance of the windows will not be affected. What can be dangerous is getting into a double glazed window. Then it may crack. But this is not fatal either - it can be replaced, although it will not be cheap.

We install the lower clamps

But that is not all. To finally install horizontal blinds on plastic windows, you need to drill a couple more holes - for the clamps (also called anti-wind). This additional fastenings below on the opening sash of the window. The lower edge of the blinds is tucked into them. They do this so that when ventilating, the blinds do not hang down, dangle in the wind, or knock over objects on the windowsill.

Don't hang out...

We install the clamps like this: we try them on, pulling the blinds down a little, mark the fastening points, drill holes, and install them. Fill the bottom bar into installed clamps. Now, even with a draft or an open shutter, the blinds will not dangle. The only thing you need to watch out for during installation is not to get caught in the glazing bead (this is a long strip that runs along the glass unit and holds it in place). It is necessary to drill a hole in the frame itself, stepping back at least 1 cm from the edge. Otherwise there are no problems.

No drilling

There is also a way to install blinds on plastic windows without drilling the frame. This method is only available for those blinds that are hung on opening sashes. In this case, they are simply hung on plastic fastenings/brackets that fit onto the frame from above. To prevent them from moving, a strip of double-sided tape is attached to the back of the bracket. Taking off protective film, it can be glued (but not fixed).

The shape of the plastic fasteners depends on the type of cornice. So you need to select it specifically for each

These L-shaped plastic brackets are not included, but can be purchased at a store or company that sells horizontal blinds. This method is convenient by simply dismantling the blinds, which is convenient if they need to be repaired or washed.

Methods for installing horizontal blinds

Just like vertical blinds, horizontal blinds can be installed on the ceiling, wall, to each window sash or to the trim. Here you need to take into account two factors: the depth of the window and the width of the window sill. First, measurements of the windows are taken.

Installation diagram:1. When installing blinds in a window opening, the length of the blinds should be reduced by 2 cm at the bottom and top. When using the overlay method, you need to do the opposite - add 5 cm on each side. 2. Using tools, make precise markings of the places for mounting the fastening structure. Installation of fastenings is carried out using dowels and special screws. Experts recommend using 6×100 dowels for this. Everything is ready to install the cornice with all the elements and check the functionality of the mechanisms.

The installation of vertical blinds differs from horizontal ones in that special weights are attached to the vertical models from below, which should be pulled together with a chain both from the inside and from the outside. outside. Most best option Blinds are an option for attaching to each window sash. The advantages of this method are obvious: compactness, preservation of mobility, ease of opening the window.

To install the blinds you will need self-tapping screws, dowels, a drill, a pencil, a tape measure and a level. If fastening is carried out using self-tapping screws, then plastic fasteners will be needed. But the most reliable way cornice fastening is the installation of structures with screws to the frame. If blinds are installed on plastic windows, then you can do without drilling. When installing blinds on non-standard windows, you need to use lamellas of a special shape and length.

How to measure

If you decide to hang the blinds yourself, keep in mind that you need to take proper measurements. This determines how convenient it will be for you to use them.

If you have chosen vertical design, you need to know the dimensions of the window opening: height and width are measured from the mounting location.

The principle of measuring dimensions for the horizontal type is a little more complicated.

Mounting in a window: the length and width of the opening are measured. In the absence of a window sill, the length can increase to the floor.

Aluminum and plastic blinds easy to shorten and adjust.

For a working window, you can choose blinds in two halves. You just need to measure the height of the glass and add 2 cm to the top. The same principle is used for the width of the glass, only you need to add 0.5 cm on both sides.

In this way you can take measurements for roller blinds.

Advice! If the window does not open, this type of curtain can be installed right in the middle of the window.

By taking measurements yourself, you save your time and money, eliminating the need to wait (often at an inconvenient time for you) for representatives of window companies.

Mounting methods

Along with the blinds, manufacturing companies include fasteners, screws and instructions. Having carefully read it and armed yourself with certain tools, the installation process will not seem so difficult.

Before we start mounting, let's look at the methods.

Fastening without drilling

To easily remove blinds at any time and not leave marks on the window frame, walls or ceiling, use the following methods:

Secure the bracket with double-sided tape;
Attach the bracket to the top of the sash that opens, and the bottom using magnets.

Drilling installation

Do the following:

Attach the cornice to the top of the sash and mark points for installation. It is advisable to pre-drill holes for screws.
Attach the bracket, take the screw and carefully screw it in, securing the cornice.
The fishing line holding the lamellas must be fixed. Drill holes at the bottom under the glazing beads; the fishing line should fit into the plugs that we insert into the holes.

Important! A separate curtain should be attached to each sash.

Installation with drilling is relevant for installing cornices in ceiling or wall areas. To do this you need:

make holes in the selected location;
hammer in a few dowels;
Secure the brackets with screws.

There may be differences in depth between the glass unit and the frame. Because of this, the fasteners sometimes do not completely adhere to the window. To eliminate this drawback, take U-shaped pads and place them (or several) into the resulting void.

Using brackets

The carrier from the blinds is fixed directly on the bracket, which allows you to easily detach it for washing and cleaning if necessary. If you decide to completely remove such curtains, this can be done quite simply. At the same time, the window remains impenetrable to wind and temperature changes.

You can secure the bracket with screws as shown below.

Methods for attaching the bracket without screws:

Hook onto the top of the opening sash profile. This method will allow you to remove the bracket without effort at any time.
Glue with double-sided tape.

Types of blinds

For plastic windows, compact horizontal blinds and more comfortable vertical blinds are chosen with equal success. They differ in the way they open, so in horizontal ones the door moves up and down, in vertical ones it moves to the side.

Classic horizontal models are made from lamellas, but now roller blinds, pleated blinds and Roman blinds, which also belong to this category of products, are no less in demand. Mostly they are hung only on windows or partitions.

The video contains selected photos of beautiful horizontal blinds in the interior

Please note that the video clearly demonstrates how to combine blind systems with traditional curtains, and also assembles good examples how to choose light protection systems for different styles interior

Vertical blinds take up more space, but they allow you to completely cover the opening and even the entire wall. This type is the most rational for decoration large areas glazing, long corridors, complex openings architectural form, for example, curved or arched.

The video below contains beautiful photo examples various types of blinds.

Types of blinds and their differences

horizontal
vertical

Horizontal and vertical ones consist of lamellas (separate strips fastened together to form a structure).

Pleated

This protection consists of 2 guides, with fabric in the middle. During operation, the fabric gathers into folds, opening the sash.

Rolled

The principle of operation is hidden in the name; with the help of a mechanism, the fabric is collected into a roll.

Cassette

Cassette windows were invented specifically for plastic windows; the cassette mechanism is attached to the window sash; if desired, the canvas is completely retracted inside.

In order for blinds to serve you faithfully for many years, you need to fasten them competently, carefully and securely. Installing blinds, although a quick process, requires certain knowledge and experience.

Methods of fastening blinds differ from each other depending on their type, the material from which they are made and the type of window. There are plastic and wooden windows. Also, the method of installation on attic and non-standard shape window.

How to take measurements correctly

First of all, the blinds must be correct size. To do this, you need to decide on the method of fastening. Methods can be divided into two groups:

Attach blinds directly to window frames. There are options here that involve the use of self-tapping screws and fastening the structure without drilling. In addition, you can install common fasteners on the entire frame or on each sash separately.
Place blinds on walls or ceilings. There are also several additional solutions possible here. – installation in a window opening, on the ceiling in front of the window, on the side walls. For each case you will need to measure your parameters.

If you plan to install blinds on several windows, you should measure each opening separately. Although it seems that the window openings are exactly the same, this is not always true. A discrepancy of 2-3 cm can lead to consequences that are difficult to eliminate.

If you plan to mount a vertical structure, it is necessary to measure the height and width of the window opening. You should be careful when measuring, since you can shorten slats that are too long, but adding additional elements to narrow blinds will be problematic.

To install plastic windows yourself, read the article:

If the model has horizontal lamellas, the measurements will be somewhat more complex. If the blinds are attached to the opening, you need to determine what the width and height are. The length of the canvas is selected at your own discretion. You can find both models up to the window sill and long options, reaching to the floor. If necessary, blinds with plastic or aluminum slats are not difficult to make shorter.

When installing directly on the frame, you will need to consider whether the window will open.

If the window is solid and does not open, you can measure the entire width of the opening. If the shutters will open, it is worth ordering a separate structure for each half of the window. Measurements should also be taken accordingly. Measure the parameters of the glass (width x height) and add 20 mm on top and 5 mm on the edges.

When designing blinds attached directly to the frame, make sure that they will not interfere with the operation of the fittings and will not become an insurmountable obstacle to its maintenance (lubrication, adjustment, etc.)

Mounting instructions

After you have taken measurements, proceed directly to installation. You will need: pencil, screwdriver, brackets, drill (6 mm drill), hammer, scissors, dowel and screwdriver. How to attach blinds with horizontal panels? This process is carried out in several stages:

step back 6 cm from the glass on both sides, mark the required place with a pencil, make sure that the line is straight, otherwise crooked curtains will not work well and will quickly fail;
using a screwdriver, make holes into which you will attach the brackets;
if the window opens, make holes in the upper part of the sash, but if the window is solid - on outside glazing bead;
insert the blinds into the brackets, snapping them into place;
Make a hole for the fastener at the bottom or side of the window sash;
lower the blinds and check their operation;
If at any stage you have difficulty, watch the video, which shows in detail how this process occurs.

Installation of vertical blinds

To attach vertical curtains, use the following instructions:

Use a pencil to mark the brackets (they should be located at a distance of 10 cm from the edge of the cornice);
Having drilled a hole, insert a dowel into it and secure the brackets using self-tapping screws;
mounting brackets and decorative panels install on the cornice;
assemble the runners and secure the fabric in them;
Weights are attached to the lower part of the blinds, then a decorative chain should be hung;
install the decorative panel into the mounting brackets by inserting the end corners and side panels into its ends;
check how vertical curtains work using the control cord and chain;
watch the tutorial video to make sure you did everything correctly.

Fastening roller blinds

Roller blinds can be secured either with self-tapping screws or without drilling. The most popular are blinds that can be hung directly on the window sash. To do this, you will need double-sided tape, adhesive tape or liquid nails. This method is suitable for both fixed and operable windows. Do not forget that the frame must first be washed and degreased with alcohol. More reliable is fastening with self-tapping screws, which is carried out according to the principle of installing vertical blinds.

Blinds are a design that does not require careless handling and, if used incorrectly, quickly fails.

Installation of horizontal blinds

A huge plus of horizontal blinds is that they can be installed on plastic windows of any shape, even skylights not an exception.

Installation on a frame is an ideal option for horizontal slats, allowing you to open and close windows separately or simultaneously.

To install horizontal slats, you need to stock up on a screwdriver, a screwdriver and marking material (chalk, pencil or alcohol-based felt-tip pen).

Having decided on the mounting method, proceed to the following steps.

Find out the dimensions of the window (measure the width and height).

If you are going to install blinds in the first way - in the window opening - you should subtract 2 centimeters from the height. This way you will achieve a result when the slats do not touch the window sill.
If you chose the third method - attaching the blinds with an overlay - add 5 centimeters to the width, but always on each side. In this case, the height is determined by the desires of the owner.
Installing blinds on windows (on each sash) is considered the simplest and most the easy way fastenings The dimensions of the window must be measured taking into account the fittings, that is, so that they do not limit the window or touch it.

Remember: both plastic windows and blinds must function perfectly and efficiently

Therefore, it is very important to take accurate measurements before hanging them.

Unpack the blinds. Assess their quality, inspect for defects, and check the components. Everything is in place?
Place the blinds against the window. It is important that the body fits between the boundaries of the beads on both sides of the glass.
Pull the blinds tighter. They must be in the same plane as the window.
Assess the overall situation. The blinds should be located at the top of the transparent area.
Visually record the presence of a gap, which very often forms between the fastening elements and the window sashes. The size of the gap can be different and vary from a few millimeters to a couple of centimeters. They do not depend on the correctness of your actions; these are rather the costs of the design of the window and double-glazed window. Manufacturers foresaw the possible risk and, to correct the current situation, equipped the blinds with linings and special elements that allow them to achieve the required thickness and reduce the distance between the fastening elements and the window sashes.

Be sure to pay attention to the marks on the base of the linings. They can be of two types: R (from English word right) and L (left)

Right and left application respectively.

Fix the gaskets until a tight clamp is established. Then secure them in the gap between the fastening elements and the window field.
Mark the fastening.

The geometric shape of the curtains is the main guideline for marking. Be sure to check that nothing prevents the window from opening and closing. Install an additional fastener where the cord is adjusted.

You can attach the blinds using one of two options.

Bead fastening. A very delicate process that requires care in choosing the length of the screws. An incorrectly chosen length is the first step towards depressurization of the glass unit, the result is a violation of the thermal insulation properties.
Attaching to a profile is a simple and safe process, but it requires care and precise actions.

Remember! The bead can always be replaced, the profile cannot.

Install the structure

Install the blinds using long screws. It is advisable that you use the self-tapping screws included in the kit. The aesthetic appearance of the window after installing the curtains depends on them. This step must be taken with great care.

Install the cornice, runners, slats

Place the decorative cornice on the mechanism and secure the plugs on the sides. Using a drill (diameter should be 3 millimeters), make a hole for the plastic “fungi”, they are located in the lower edge of the bead. This will allow you to install the guide line. After pulling it tight, secure it and cut off the excess.

Control step - checking the functioning of the entire structure

How to take measurements

If you decide not to use the services of a specialist, but to hang the blinds yourself, you need to take the correct measurements, since the ease of use of the curtains will depend on this. If you are installing vertical blinds, you will need to know the dimensions of the window opening. Measure the height and width from the mounting points. Be careful: shorten long curtains will not be difficult, but adding plates to ones that are too narrow will not work.

Measurements when installing a horizontal model will be more difficult. If you are attaching curtains directly to the window, you will need its width and height. The length of the blinds can be chosen as desired: they can be up to the floor or cover only the window sill. If necessary, blinds made of aluminum and plastic can be easily shortened or adjusted using the built-in mechanism.

If the window is blind, you can fix the curtains inside. For an opening window, separate blinds for each half are suitable. In this case, measure the width and height of the glass, and then add 2 centimeters on top and 0.5 centimeters on both edges

It is important that the existing window fittings do not interfere with the functioning of the blinds. Using the same principle, measurements are taken to install roller blinds.

You can take all the necessary measurements and order blinds using these data. However, in this case you will spend more money than when purchasing standard models. To save money, find out in advance what the size chart is and select the appropriate fastening method. If you have difficulty taking measurements, watch the instructional video.

Mounting diagram for horizontal blinds

Alternative types of installation

It is not necessary to drill into the window to attach the blind base. There are other options for attaching blinds to windows. For installation roller blinds you will need the following tools:

Double-sided tape;
liquid Nails;
scissors;
ruler or level.

Roller blinds are a smooth canvas that can be rolled up, raised or lowered using a special mechanism. Roller blinds do an excellent job of protecting from scorching sun rays, while at the same time decorating the living space. Let's look at how to attach roller blinds to plastic windows. This type of curtains is attached separately to each window sash. Roller blinds There are several types, and the method of fastening each type may vary.

Attaching roller blinds with double-sided tape

The Mini roller system is a classic roller blind on a compact shaft. They can be easily installed on individual plastic window sashes. The fasteners are attached without drilling, and thanks to this the frame remains intact. To prevent the fabric from sagging, the lower metal rail should be fixed using special magnetic holders. The window sash can be opened in any way.

Roller cassette curtains are roller blinds that are assembled into a cornice that looks like a compact cassette. This type curtains will do for flaps, plastic or aluminum. The most popular curtain options are the Rollite and Uni systems. Models of these designs include strips for double-sided tape. Using these strips, the guides are glued to the window sash.

Cassette blinds are controlled by a single chain, with the help of which the height of the curtain is adjusted. On window frame a special clamp is installed that keeps the chain from sagging when the window is ventilated.

Isotra blinds

Isotra and Isolite systems are also popular. A plastic window with this type of blinds can be used in any mode without fear of breaking the system. Fastening is carried out using glazing beads, in which small holes will need to be made. If such glazing beads become damaged, they can be easily and quickly replaced at any time.

Interestingly, the method of attaching blinds to the wall is still used. This type of installation does not harm the plastic window; you just need to take the correct measurements.

Instructions for installing blinds yourself

The very first step is determining the dimensions. You can attach curtains to a window opening, wall, or ceiling. Having determined their future location, it is necessary to take correct measurements.

To secure the curtains to the opening, you need to take the following measurements. Determine the length - it will be equal to the height window glass with insulation (usually a strip of rubber) plus 1 cm.

The width is defined as the width of the glass, but taking into account the sealing rubber. Don't forget that the plastic window should open freely when the blinds are assembled.

If you are going to attach curtains to the wall, then please note that they must completely cover the plastic window. The width will be 10 centimeters wider than the window

The length, taking into account the cornice, increases by about 5 centimeters; its final size depends on whether the shutters cover the window sill or are located just above it.

When blinds are attached directly to plastic windows, the length will be its height and the width will be equal to the width of the window being closed.

We use the drilling method

You can fasten the structure using drilling tools, or do without them.

Let's look at how to hang it correctly horizontal curtains with your own hands directly to the window sash using the drilling method.

Since the curtains are attached with self-tapping screws, we mark their installation locations by placing the top bar of the blinds against the top window profile. Use a small drill to make holes and attach the brackets.

We fix the blinds and attach the fishing line that will hold the slats. On the lower part of the sash, again by drilling, we make two holes, placing them exactly under the upper exits.

We fix the fishing line in the structure of the blinds, fix the ends with plugs and thread them into the prepared holes, stretch the fishing line.

The drilling method discussed is usually used when it is necessary to hang rolled or horizontal structures.

This method is also used to hang vertical curtains. Holes are drilled at the fastening points and mounted using connecting elements.

We take measurements

You need to decide on the type of blinds (horizontal, vertical) and the method of installing them (on a wall, on a ceiling, in a sash window, in a window opening) before purchasing. And even before you start measuring. Because different installation methods require different sizes. Only with correct measurements will it be easy to install blinds on plastic windows.

For everything to work well, you need to take the measurements correctly.

Another important point: Each window must be measured separately. Sometimes it just seems like they are absolutely the same. Believe me, there is a difference. You also need to write down the measurement results and sign which specific window you measured and which sash it is. Accurate and detailed records will help avoid confusion during purchase and installation.

In the window opening

Although the appearance of the products is different, when measuring there is no difference between horizontal and vertical models. If you are going to install blinds in a window opening, you need to subtract 2 cm from its width on each side. You can subtract 1-3 cm from the height of the opening. Such gaps are needed so that the canvas hangs freely in the opening and the lower edge of the slats does not rub against the window sill.

How to measure when installing in a window opening

Please note that you can install blinds on plastic windows “into the opening” not flush with the edge of the opening, but deeper - near the glass itself or by retreating 5 or more centimeters from the edge. If the opening has a trapezoidal shape, the height/width of the opening will be smaller for the glass, so we carefully take measurements

And also, in this case, it is better to put marks for installation when measuring. Then you will know exactly where you will need to install blinds on plastic windows so that their dimensions fit perfectly.

On the ceiling or wall

Here the measurements depend on your desires. The length of the blinds can be up to the floor or just up to the window sill. Moreover, depending on the type of installation chosen, the slats can cover the window sill or not. So the length is whatever you like.

This is wall mounting. When mounted on the ceiling, the length will increase, but how much is up to you

The width of the blinds with this installation method is wider than the window opening. How much wider depends on your desire, but the minimum offset is 5 cm on each side. But if the window is in the same plane as the wall surface, you will need additional brackets, which are not included in the package: the slats must be placed at a distance of at least 5 cm from the glass surface so that they do not interfere with opening the doors for ventilation.

On the doors

When installing blinds on a multi-leaf window, there are two options - install one device on each sash or order one long one for the entire window. Usually the first option is chosen - it makes it possible to open and close the shutters with the blinds lowered. If you choose this installation method, you will need to measure each sash and record the results. The doors may be different, so be careful.

The option on the right is more convenient

The width of the blinds when installed on the shutters is taken to be 3 cm wider than the glass. When hanging, the lamellas overlap the profile by 1.5 cm. This is convenient and does not interfere with opening/closing windows. The length depends on the location of the fastener, but usually it is 5 cm longer than the height of the glass.

Once again we draw your attention: we measure each sash!

Varieties

Today, construction stores offer several types of blinds. Depending on the specific type, the features of fastening curtains change.

Horizontal blinds

You can find several varieties of horizontal blinds on sale. The lamellas in them are installed horizontally, which explains the name of the design. The thickness, width and type of material can be customized. The structure can be attached inside the frame, to the frame itself, to the slope or on top of the window block.

Horizontal blinds are most often installed in institutions

These blinds are installed in offices, production facilities and other places. These designs are universal - if desired, you can find horizontal blinds in almost any color and shade.

Vertical blinds

Due to their design features, such blinds are most often mounted on top of windows.. The slats in this case are oriented vertically and are made of plastic or fabric. There are varieties on the market that differ in the length of the slats.

Vertical blinds are mainly installed in residential areas

This model is most often installed in private homes, but they are also in demand in offices. Installation of vertical blinds is carried out using self-tapping screws. As an alternative, installation to the ceiling is practiced.

Roller blinds

Roller blinds are made of fabric, completely cover the glass, and if desired, they can be raised by rolling them into a roll. Installation is carried out using brackets, screws or adhesive tape.

Roller blinds can be installed without drilling walls and doors - using double-sided tape

The need for drilling varies depending on the type:

Vertical structures are mounted on top of the window or under the ceiling. In both cases you will have to drill the surface.
Horizontal blinds can be attached to the top slope or to the window sashes. Without drilling, such structures can be mounted on the sashes of a window block.
The interframe analogue, as you can easily guess from the name, is designed for installation inside the window itself. This option requires drilling the largest number holes.

Bracket mounting

Taking into account the dimensions of the device, the places where the brackets will be installed are marked. The distance between them should be 55-60 centimeters. Avoid getting the brackets into the control mechanism, clamps and calipers.
The brackets are attached to the ceiling, wall or window sash.
Turn the bracket latches counterclockwise until they stop completely.
The upper cornice of the product is inserted into the bracket, after which the latch is turned clockwise until it stops.

Drilling installation:

Brackets are installed on the upper part of the sash, and plastic corners are attached to the lower part.
Along the edges of the upper cornice, cables are secured in special bushings.
The cornice is fixed to brackets.
A cable is threaded along the edges of the lamellas through special holes.
A second pair of bushings is installed in the lower brackets, through which the cable is threaded and secured with a screw.
The mechanism is secured with a hook on the handle.
The handle holder should be directed towards the sash.
After installation is completed, you should make sure that the structure is working.

Installation of the structure without drilling using overhead brackets:

Places for installation of brackets are marked.
The brackets are secured with a screw.
The structure is installed on the top of the sash and then secured with a key.
Drop-in bottom brackets are attached to the bottom of the sash.
The cables are secured in the bushings.
The cornice is fixed to the brackets, after which the cable is threaded.
Plastic bushings are directed into holes located on the bottom bracket.
Use a screw to secure the cable in the bushing.
The handle hook is attached to the control mechanism, after which the handle holder is installed.
Finally, you need to check the operation of the structure.

Installing blinds inside the frame

TO wooden window paired design or plastic old type, it is possible to install inter-frame blinds. To do this, the distance between the glasses must be at least 3 cm. Installing the mechanism inside the window is a little more complicated than mounting it on the sashes. In addition to attaching the bracket, drillings are required in the frame to provide control output for the rotary-lifting mechanism.

Drill two holes at the top of the inner sash (one above the other) in the profile from the side of the canopies - above the upper canopy.
Attach the inter-frame brackets to the upper profile.
Snap the blind curtain rod into the brackets.
Unwind the control cord and pass it through the lower hole and through the guide spring.
Pull out the flexible rod through the top hole.
Use a clamp to connect the flexible rod and the control handle.

How to properly install blinds on plastic windows

Just 10-20 years ago there was no choice of window coverings - only massive curtains and curtains were hung on the windows. Progress does not stand still, and in last years New types of window curtains are appearing. The most popular now are blinds. In apartments you can often see a combination of blinds + Roman blinds and blinds + curtain. This method of curtaining protects the home from the sun, street noise and can decorate the window. Increasingly, instead of heavy curtains and blinds, compact roller blinds and blinds are used in everyday life. They fit much better with metal-plastic window frames. They are used in both offices and residential premises.

How to properly install horizontal blinds

What do you need for efficient installation blinds
Preparatory stage for installing horizontal blinds
Step-by-step instruction installation of horizontal blinds

The fashion for bulky curtains that collect significant amounts of dust in record time has already passed, so most people prefer to use light, airy fabrics to decorate the window area. To protect the window of a room from strong sunlight and curious passers-by or neighbors, horizontal blinds are increasingly being used.

Horizontal blinds are easy to use, which is why they are so popular.

It’s not difficult to figure out how to install horizontal blinds, but there are a lot of subtleties in this matter that need to be taken into account so that in the future the mechanism works correctly and fulfills its function. Blinds can be made of wood, plastic and aluminum, with the latter being the most common as they are extremely easy to use and can be installed on all types of window frames.

Step-by-step instructions for installing blinds

To understand how to install blinds on windows with your own hands, you need to consider their placement. For example, when using PVC brackets can be dispensed with without drilling the frame. This solution allows you to carefully attach products with minimal time.

When installing using brackets (for large blinds), the work is carried out according to the following scheme:

1. Above the wall or frame where the blinds will be installed, a distance of 10 cm is marked. When marking, you need to use a level, which will prevent uneven installation of the elements.

2. Above the drawn line, the places for fixing the brackets are determined according to the width of the upper cornice.

3. Using the holes in the brackets, mark the locations for preparing the holes for the dowels.

4. The wall is drilled at the marked points and dowels are installed.

5. The brackets are fixed on the wall, the upper cornice and the blinds assembled according to the instructions from the set are installed in them.

6. Insert the control handle into the hook of the rotating mechanism located on the upper cornice (relevant for a design with a cord and handle).

7. Check the correct installation and ease of opening the window when the blinds are fully folded.

In addition to these instructions, the video attached to the article will also help you become more familiar with the installation details. Expert tips and an accurate description of each step will allow you to complete the job without errors.

Installation instructions without drilling

To install blinds without drilling with your own hands, you do not need any tools or even skills; it is important to correctly calculate the width of the canvas and attach it evenly to the surface. . For clamps

For clamps

Installation on special brackets-clamps is perhaps the easiest way to hang blinds with your own hands, but this mounting option is only possible on an opening window sash:

assemble the cornice and canvas according to the manufacturer’s instructions;
put clamps on the cornice, check that they do not touch moving elements and do not interfere with the movement of cords and chains;
attach the cornice to the sash, mark with a simple pencil where to hang the brackets;
unfold the canvas, check whether it touches the protruding elements of the window; if necessary, the curtain must be adjusted to size: cut to width and shortened;
unclip the clamps from the cornice, open the sash and put on the brackets according to the marks, make sure that they are tight and level;
You can fasten the curtain rod and the canvas to it.

The diagram shows one of the options for hanging blinds without drilling

On tape

If you are looking for a simple and at the same time reliable way to hang blinds on a plastic window with your own hands and not damage the profile, then the option of mounting with tape is the most optimal. Here it is important to glue the cornice correctly so that the canvas hangs straight down, without distortions, otherwise there will be unsightly overlaps and gaps on the sides and bottom, and in the end the blinds will quickly break.

Installation steps:

assemble the blinds according to the attached diagram;
try it on the window, if necessary, cut it on the side and along the length, taking into account that the minimum gap between the panel and the protruding elements of the window is 5-10 mm;
mark the extreme points of the cornice;
draw a line between them, ideally it should be strictly parallel to the window sill;
if the geometry of the opening is not ideal, make a plumb line from a rope and a weight, attach it to the marks, mark the side lines where the edges of the canvas will go, and straighten the line along which the cornice will be glued, it is better to have a slight distortion at the top and bottom than ugly gaps and overlaps on the sides;
wipe the place where the cornice is fixed with solvent or acetone;
remove the protective film from the double-sided tape and glue the cornice strictly along the line;
check the operation of the canvas; if it catches somewhere, then it would be correct to remove the system, clean the installation site and re-glue it.

Sometimes the tape is not glued to the cornice, but the kit comes with special fasteners with a magnet or hooks. Installation of such a model occurs according to an identical scheme described above.

The video clearly demonstrates that even a child or a woman can glue blinds with tape.

Where to install

Installation of horizontal blinds is mainly carried out on:

casement windows;
upper frame profile;
on the upper slope of the opening;
less often on the partition, if the design features of the opening or the design of the room require it.

Installation of vertical blinds is impossible for technical reasons on the sash or window frame; they are usually mounted on:

upper wall;
ceiling;
horizontal slope of the window, if its width allows.

Installation Features

Compact and lightweight, horizontal blinds can be mounted without drilling. To do this, use special brackets made of metal or plastic, as well as double-sided tape.

All models that need to be installed on a slope, in a pier or on the ceiling are fixed on special brackets that are attached to the surface with screws or dowels.

In order not to redo the work when installing blinds with your own hands, it is better to once again check and double-check the geometry, how the canvas will go, whether the cornice is skewed

Required materials and tools

Now let's look at fastening with self-tapping screws. This is a much more versatile option that allows you to hang almost any model using any mounting method (on the ceiling, in an opening or on the walls).

First of all, you should pay attention to the quality of the fastening elements included with the blinds. Sometimes manufacturers (this statement especially applies to cheap Chinese-made models) include too short and thin self-tapping screws made of low-quality steel into the kit.

If you plan to mount heavy structures to the ceiling, it might be worth purchasing something more reliable.

Also for work you will need:

Measuring tool: pencil, ruler with bubble level, roulette.
Drill. The drill bit for the drill is usually #6.
Dowel and hammer.
Brackets for mounting (usually included with the product).
Scissors.
Screwdriver.

Having prepared a set of tools for work, you can begin.

Installation of horizontal structures

To install horizontal products on plastic windows without any problems, you need to prepare a screwdriver and a screwdriver in advance. In this case, the upper part of the product should be placed on the brackets. Mark in advance the places where you will need to screw in the screws. Try to have as few fasteners as possible, of course, without compromising the reliability of the fixation.

After all the measurements, remove the brackets, and using a screwdriver, sequentially screw the parts into the marked places. It is necessary to check whether all the clamps are holding and that they are not bending under the weight of the structure. Fabric blinds are attached without screws. They are also fixed using brackets, but they are glued to the profile.

Vertical blinds are installed in a similar way. If installation to the ceiling or slopes is chosen, then special slats are first installed. This is also done using screws. Then everything goes according to the usual plan with brackets. But if you are attaching blinds to the wall, you first need to install a special curtain rod. Also, unlike horizontal models, vertical products also need to be assembled. But they are sold complete with instructions, so you can cope with the task without any effort.

First, collect all the runners, turn them right side towards you. Then the slats are inserted into the runners. You will know that the parts are connected by clicking. It guarantees a tight seal. Special weights are inserted into the lower part of the lamellas, secured with a chain. You can test the blinds and their operation directly on the floor before installing them on the wall. Otherwise, you will have to remove them again and fix the lamellas better. The mechanism of vertical blinds should work smoothly and without any jerks.

Installing ready-made blinds on windows does not require any special skills. Moreover, for this, in general, simple work, sometimes you have to pay quite a lot of money to professional installers.

Therefore, it would be most advisable to mount the blinds to the ceiling with your own hands. To do this, you can make do with improvised tools that are available in the arsenal of any home craftsman.

Aesthetics and practicality

Just recently, blinds were perceived as nothing more than some kind of foreign exotica. But quickly enough our fellow citizens, accustomed to traditional curtains and curtains, were able to appreciate the practicality of use and the aesthetic beauty of these structures.

From then on, the “triumphant march” of these light-protective devices, invented back in the 18th century in the USA, began through apartments and offices in our country. Today, we no longer perceive them as something unusual - more and more owners of residential and office premises give preference to these easy-to-use lattice structures.

The only negative that can be pointed out is the higher price of blinds compared to classic curtains from fabric. However, the overall cost of the structure can be reduced if you install it on the windows yourself.

Design features of blinds

Vertical blinds

Today there are several types of blinds on our market, differing from each other in the features of their design. Depending on their type, the methods of attaching blinds also differ:

Horizontal blinds. The slats (or so-called “slats”) in this design are located one above the other. The access of light into the room here is regulated by rotating the lamellas around their axis, as a result of which they either press tightly against each other or form a gap. As a rule, such structures need to be installed directly on window frames.
Vertical blinds. They differ from the first option in the arrangement of lamellas hanging from top to bottom. In this case, adjusting the access of light can be done either by turning the slats or by moving them to the side, as with conventional fabric curtains. In this case, the fasteners for the blinds are located directly above the window - on the wall above the window opening or on the ceiling.
"Roman curtain". It is one of the types of horizontal devices. Only the access of light here is regulated not by turning the slats, but by lifting the entire structure: the curtain goes up, rolling up into a roll. Fasteners for blinds of this type are also located either on the wall, above the window, or on the ceiling.

The materials from which devices can be made are very different - aluminum, wood, fabric. But this in no way affects the installation features of the blind mounts. As a result, we have two main types of fastening:

directly on the window frame (for horizontal type devices);
on the wall or ceiling (mounts for vertical blinds).

If some damage is caused to the blinds during the work, it will no longer be possible to exchange them for others. Warranty for damage caused by self-installation, does not apply.

Installing blinds on a wall or ceiling

Blinds mounting diagram

The main device with which vertical blinds are attached is the cornice. It contains rotary and sliding mechanisms, the slats hanging down are attached to it.

Preparatory work

For fastening the cornice vertical device to the wall or ceiling, you will need the following tools:

impact drill or hammer drill;
screwdriver;
roulette;
building level;
pencil.

Before you begin installing the cornice, you should take all the necessary measurements. The height of the cornice must be installed in such a way that the slats hang at least 5 - 10 cm below the window or window sill.

At the required height on the wall, mark a point and, using a pencil level, draw a strip along which the cornice will be attached. On this line, mark a point that exactly coincides with the middle of the window.

Installation of cornice

Next, we will need to determine the points for installing fasteners - dowels and nails. To do this, we attach the cornice from the blinds kit to the line so that its center corresponds to the mark of the center of the window.

If the part already has holes for fastening elements, then we place points in these places on the wall or ceiling, depending on where you intend to attach the cornice. If ready-made technical holes are not provided, then you will have to make them yourself using a drill, stepping back a few centimeters from the edge of the cornice.

Then, using a hammer drill or impact drill We drill the wall (ceiling) and hammer a plastic dowel into the hole.

Place the cornice again in place so that mounting holes in the cornice coincide with the dowels installed in the wall or ceiling, and using self-tapping screws we fix it in the desired position.

In the case of a significant width of the cornice or the overall massiveness of the structure, it is recommended to additionally secure the cornice in the center in one or two places.

Installing blinds on window frames

This installation method is used mainly for horizontal devices. Unlike attaching a curtain rod to a wall or ceiling, this method Many home craftsmen find it difficult.

Many people do not quite understand how to attach the structure to the frame of plastic windows. Meanwhile, the same self-tapping screws or self-tapping screws are used for this.

In this case, when drilling an aluminum or polyvinyl chloride frame with a self-tapping screw, the tightness of the window does not suffer at all.

To do this, as in the first case, we make markings in such a way that the blinds evenly protrude beyond the edges of the glazing on both the right and left. In this case, we take into account that all preliminary measurements were made before purchasing the blinds, and they exactly match the size of your window. We install the blind holders directly on the window frame, using metal screws (for aluminum frames) or ordinary screws (for PVC frames) for fastening. For more information about installing blinds, watch this video:

We snap or screw the supporting cornice onto the holders - depending on design features devices. We install sequentially on the cornice rotating mechanisms with control cords. It is also possible to install blinds of this type in the inter-frame space if you have double wooden frames at home.

The light protection device is mounted on the inner frame on the side facing the outer frame. To control the blinds in this case, a hole is drilled in the upper part of the frame through which the cords of the rotating system are threaded. To learn how to install blinds without screws, watch this video:

As you can see, installing any type of blinds on windows can be easily done with your own hands. This will allow you to significantly save on calling a team of professional installers. To carry out the work, it is enough to have only a standard set of household items. construction tools and necessary mounting hardware.

Installing blinds on plastic windows without drilling allows you to maintain the integrity of the profile; installation can be done with your own hands in a matter of minutes; no tools or special skills are required.

Types of blinds that are attached without drilling

Blinds can only be hung on the window sash without drilling; to avoid deformation from the load, they must be compact and lightweight. This fastening is convenient because you do not need to roll up or lift the curtains to open the window. The following types of blinds can be installed without drilling:

horizontal blinds made of thin wooden and aluminum slats, 25 mm and 16 mm wide;
pleated curtains;
roller and Roman curtains - mini systems, small cassette systems, regular ones on a roller, including the most fashionable now day-night.

On the doors with folding mechanism You should select horizontal blinds with side guides; they press the canvas to the frame and it does not dangle when the window is opened.

Fasteners

All fasteners for installing blinds without drilling are developed by manufacturers taking into account the size and weight of curtains; they are reliable and designed for a long service life. Fasteners and installation instructions are included in the kit. There are several ways to attach blinds without drilling:

double-sided tape - for installing light and small-sized curtains;
magnets on double-sided tape, the installation principle is identical to the first method, the only difference is in the design features of the blinds;
brackets-clamps.

According to reviews from experts, it is advisable to hang blinds with tape only on plastic windows, wooden surfaces such fastening is unreliable.

The following videos will inspire the weaker part of humanity to install blinds; the video once again proves that installation without drilling is possible even for women.

Types of brackets

Installing blinds on brackets without drilling is a reliable way to fix the structure on the window sash. Manufacturers offer 2 types of clamps:

plastic;
metal.

Plastic hinge brackets are a hook that fits onto the window sash, similar to a regular paper clip. The holders are inserted into the special grooves of the hook and the roller with curtains is hung on them. These mounts are designed for installing light-weight blinds. They are almost invisible on the window.

Metal brackets can withstand greater weight, are universal, suitable for installing lightweight mini structures and for attaching heavier horizontal blinds with aluminum and wooden slats. Metal clips provide rigid fixation to the window. The principle of operation is the same as that of a clamp: the fixed part of the bracket is put on the sash and fixed on the front side of the window with a clamping foot. Metal clamps are much more expensive than plastic clamps, but they are more convenient and reliable; if the fastening becomes loose over time, it can be tightened. The metal bracket looks massive and protrudes from the front side.

And here opinions about brackets differ radically: according to reviews from men, metal clamps are the best option for hanging, while women write in their reviews that plastic clamps are more aesthetically pleasing. It is difficult to reconcile the opposition, the male population is for reliability and strength, and women always know everything better, it is important for them to be beautiful.

Installation instructions

To hang blinds on tape or clips, you don’t need to drill holes, so you can handle the task yourself.

It is important that the brackets do not touch the moving part of the rollers and cords inside the curtain rod. Before installation, be sure to try on the fasteners and, in this form, attach the blinds to the window to mark the installation location of the brackets or clamps.

Installation on tape

You can install regular and cassette blinds using tape; the only difference is in the fastening; the installation technology is identical. It is important to ensure reliable adhesion here, so the surface should be properly prepared:

be sure to wash the window frame and dry it well so that dust and debris do not get under the tape;
treat the installation site with a degreaser; according to reviews from experts and home craftsmen, acetone is best suited for this.

To hang a regular model, you need to attach special platforms to the profile. The adhesive tape is already glued to the parts; you just need to remove the protective layer and attach the pad in place to the prepared surface. Next, a holder with grooves is hung on it, onto which the cornice is fastened.

Horizontal cassette blinds are also installed using double-sided tape. The adhesive strip is located on the inside of the box on the top bar and on the sides. Here it is important to place the cornice evenly against the frame and press it tightly. To avoid distortions, it is recommended to put marks on top, which will serve as guidelines. Hanging blinds with tape with your own hands is very simple, but this method does not leave room for error. If the curtains are installed unevenly, you will have to remove the structure, tear off the tape and re-stick it. Be sure to watch the video tips from the master; he explains all the nuances of installing cassette curtain rods with tape.

How to hang blinds on plastic brackets

Plastic brackets for hanging blinds come in the form of hooks or brackets, it all depends on the design features of the cornice. The hooks are installed on the top of the frame, and brackets are attached to them in grooves, onto which the blinds are placed.

The clips have a more rigid fixation and are suitable for installing small horizontal blinds, including pleated blinds. The cornice is placed at the installation site, pressed against the sash, and a bracket is placed on top, grasping two surfaces at once, like a paper clip on paper. The clamp should be pressed until there is a characteristic click, which indicates that the edge of the bracket has completely entered the groove of the cornice.

Features of installation on metal brackets

To install a metal bracket, you must first mark the space for the clamp. Then it is put on the sash basic part bracket and the movable element and is pressed on the front side with screws.

The video below shows how to attach blinds to different types brackets, you can compare designs and select best option for myself.

Just 10-20 years ago there was no choice of window coverings - only massive curtains and curtains were hung on the windows. Progress does not stand still, and in recent years new types of window curtains have appeared. The most popular now are blinds. In apartments you can often see a combination of blinds + Roman blinds and blinds + curtain. This method of curtaining protects the home from the sun, street noise and can decorate the window. Increasingly, instead of heavy curtains and blinds, compact roller blinds and blinds are used in everyday life. They fit much better with metal-plastic window frames. They are used in both offices and residential premises.

Types of blinds

Designers bring to life a variety of solutions that have no analogues. There are the following types of blinds:

plastic;
wooden;
fabric.

Installing blinds on a plastic window is a job that requires preparation. The installation process will depend on the type and shape of this product. Note that blinds are classified according to their shape:

Horizontal.
Vertical.
Rolled.

Horizontal ones are most suitable for living spaces. They do not take up space under the windows and can be mounted both inside and outside the sash. Can be combined with curtains of different sizes and styles.

Vertical blinds look better in office premises. Their peculiarity is that they can be attached directly to the ceiling. They can visually increase the space and are suitable for rooms with low ceilings.

Roller blinds have a wide palette of colors and can decorate any room. Made from fabric, they are easiest to clean from dust and dirt. There are several ways to attach them.

In the CIS, you can most often find blinds made in China, Belarus and Russia in stores. Since the majority of the population has plastic windows, especially in cities, it is necessary to study information on how to install them correctly. Let's consider several options for how to attach them to windows with your own hands, so as not to damage the window structures.

Standard installation of blinds on plastic windows

Blinds can be attached different ways. It can be:

installation by drilling;
using double-sided tape;
using magnets;
using brackets.

When purchasing, instructions are included on how to hang blinds on plastic windows yourself. Mostly advice is given on how to install them by drilling windows. In this case, the fastening is carried out to the window frame above the double-glazed window. You need to carefully study the instructions and carefully take measurements.

Installation of blinds is carried out in the following ways:

into the opening of a plastic window;
onlay;
for each half of the window separately.

Important! Before purchasing blinds for two window halves, make sure that the lifting mechanism is on the left and right sides. Otherwise, the cords from different halves will interfere with each other.

Installing blinds on windows using drilling is not suitable if you plan to change the type of curtain. After drilling, marks will remain on the window profile, and this will be noticeable. The blinds are attached with screws and this moment This is the most reliable type of fastening.

Let's take a closer look at how to hang horizontal blinds on windows. The process can be divided into the following stages:

We retreat 5-6 cm on both sides and mark the location for attaching the blinds. At this stage, you need to measure the distance very accurately, since if there is an error of even a couple of millimeters, your blinds will hang askew and will soon fail.
We make holes for the brackets with a screwdriver, paying attention to whether the window sash will open or not. If the window will open, then the hole is made in the upper part of the window sash; if it is blind, then on the outside.
After inserting the blinds into the brackets, just snap them into place.
On the side of the sash you need to make a hole for the latch.
Check how the mechanism works and whether it is comfortable for you.

Vertical blinds are a little easier to install; the following procedures should be followed:

We make markings for the brackets, retreating 10 cm from the edge of the cornice.
We drill holes and insert dowels into them. After this we fix the brackets.
We install the fasteners together with the slats on the cornice.
We assemble the runners, fasten them into the canvas, and then attach weights to the bottom of the slats.
You can check the operation of vertical blinds.

The brackets can be glued with double-sided tape if you do not want to spoil the window profile. If after drilling the window there are excess holes left, they can always be removed with acrylic sealant.

If you purchased roller blinds, you can use another installation method to install them.

Alternative types of installation

It is not necessary to drill into the window to attach the blind base. There are other options for attaching blinds to windows. To install roller blinds you will need the following tools:

Double-sided tape;
liquid Nails;
scissors;
ruler or level.

Roller blinds are a smooth canvas that can be rolled up, raised or lowered using a special mechanism. Roller blinds do an excellent job of protecting from scorching sun rays, while at the same time decorating the living space. Let's look at how to attach roller blinds to plastic windows. This type of curtains is attached separately to each window sash. Roller blinds come in several types, and the mounting method for each type may vary.

Roller cassette curtains are roller blinds that are assembled into a cornice that looks like a compact cassette. This type of curtain is suitable for flaps, plastic or aluminum. The most popular curtain options are the Rollite and Uni systems. Models of these designs include strips for double-sided tape. Using these strips, the guides are glued to the window sash.

Cassette blinds are controlled by a single chain, with the help of which the height of the curtain is adjusted. A special clamp is installed on the window frame, which keeps the chain from sagging when the window is ventilated.

Interestingly, the method of attaching blinds to the wall is still used. This type of installation does not harm the plastic window; you just need to take the correct measurements.

Marking before installation

In the question of how to hang blinds on plastic windows, one of the main points is correct measurements windows and blind designs. You need to take measurements before going to the store. The main thing is to maintain the optimal distance along the edges of the markings, armed with a ruler and pencil. It’s even better to mark it on the window itself with a pencil using a level; in this case, you don’t need to rely on your personal feelings and measure by eye. The fasteners must be marked symmetrically on all sides. When installed inside a window opening, our design should not reach 3 cm. When installed on top of the window, it should protrude no more than 5 cm at the edges. The height should be 3-4 cm higher. It is necessary to ensure that the blinds do not extend beyond the boundaries of the glass.

It happens that the fastening plates do not fit tightly to the window profile. In this case, special pads are used, which, depending on the gap, are used in different quantities - from one to four pieces.

It is necessary to measure the height and width of the window along the light opening to the edge of the sealing rubber bands. Then measure the depth of the bead from the glass to the outer surface of the profile. It is necessary to take into account the availability window fittings, so that it does not interfere with the operation of the blinds. If you take incorrect measurements, unnecessary sunlight will shine through the cracks in the blinds.

To attach horizontal blinds made of plastic, the Holis and Magnum system is used.

Before installing blinds, you need to prepare window openings. They must be smooth and clean. Ideally, they need to be degreased.

Remember, with the slightest error in measurements and installation of fasteners, there is a great risk of damaging both the windows and the structures themselves. Installing blinds with your own hands should be treated with greater care and attention, as this is a very painstaking job.

How to choose blinds

When choosing blinds for your apartment, you need to carefully select the material, color and texture in order to harmoniously fit this type of curtain into the living space. If you have a glazed balcony, then plastic or aluminum blinds will be the only option the right decision on the balcony windows.

An important advantage of blinds is their compactness, heat and sound insulation. When using this type of curtain, your window sill is freed up. You can save a lot on energy consumption, as blinds protect your living space from excess sunlight and heat. In summer, the air conditioner will operate in a more economical mode. Now you can purchase structures not only from plastic and aluminum, but from bamboo and wood.

Vertical blinds are often treated with special dust-repellent solutions. This design can be rolled up and washed in washing machine or with your hands.

Enough interesting view for interior decoration for pleated curtains. Pleated blinds are made from pleated fabric and are attached directly to the window. These curtains are closed using a cord.

The most refined and expensive look wooden blinds. Wooden plates do not rattle, have a natural structure, protect the room from light and do not heat up. They enhance the room and fit into any interior, suitable for both offices and bedrooms. They are made from Canadian linden and balsa wood varieties.

You can also choose multi-textured blinds - a combination of plastic and fabric. Vertical plastic blinds are made to be curly, because of this the entire room is filled with a variety of light reflections. They look like curtains made of airy fabrics.

A new product on the market is photo blinds. Any design can be applied to the white slats, and when the blinds are opened you can admire the beautiful picture.

Japanese curtains are a combination of several fabric panels made of fabric or plastic. They move along the cornice with different guides and can move and slide apart.

You can always change the look of your windows by buying new blinds - and you have a new room without renovation. Carefully choose the color of the curtains, paying attention to the colors of the furniture in the room.