How to make a mesh for gabions. DIY gabions

Many owners of private houses use gabions as elements of landscape design. Thanks to such structures, it is possible to quickly and effectively ennoble the territory. These elements of the decoration of the site have high strength, stability, of which you can perform the most different elements for the design of the territory. And the simplicity of the technology allows you to make gabions with your own hands, you just need to clearly know the step-by-step instructions.

With the help of a gabion, you can decorate a garden or patio your house

General description and design device

Gabions are volumetric structures made of metal mesh. In their appearance, they resemble cells of different sizes, but in decorative purposes their figured variants began to be used. Various stones or other materials are poured into these nets, which give the structure an interesting and attractive look.

Since gabions are constantly in the open air, they are affected by various adverse weather conditions, it is best to make them from steel wire double torsion with a diameter of 2 to 8 mm. And it is also desirable that the wire has anti-corrosion protection from a polyvinyl chloride, zinc or galfan coating.

A thick metal wire is used as a frame for a gabion.

Most often, a mesh with a hexagonal shape of cells is taken for the frame, but if desired, it can also be used with square or rectangular ones. The following materials are usually used to fill such a structure:

crushed stone;
granite;
pebbles;
cobblestone;
sandstone;
basalt;
slate.

If during the filling of the structure large materials voids have formed, then they can be filled with small gravel. In principle, there are no special requirements for the material in terms of color, appearance and shape, the only thing is that it should be about 40% larger than the grid cell.
The internal volume of the gabion is filled with stone or crushed stone
Scope of application
Initially, gabions played the role of fortification structures on the fields of military operations. At that time, they were made from wicker baskets, and filled with ordinary earth. Such structures were high reliability, well protected from bullets and quickly assembled.
Nowadays, gabions are widely used as:
decorative fences;
fortifications for bridge piers;
framing for flower beds and lawns;
wind barrier;
supporting walls for strengthening hangars;
organization of embankments;
design of places of rest;
retaining walls for overhanging plants.

V landscape design such products are often used to give respectability and chic to a suburban area. They don't require special care and cost the owners inexpensively, especially if you make gabions from the grid with your own hands.

This video details how to assemble a gabion with your own hands:
Step-by-step instruction
If initially gabions had only a rectangular shape, now they began to use completely different types this product. Classic option are box structures. They are mainly used for the construction of protective supports, steps and fences. This version of the product is also called Jumbo, and it is the most dimensional. And also there are cylindrical, flat and artistic designs.
Cylindrical products are otherwise called gabions-bags. They are used for decorative purposes., and with the help of them, foundations located under water are equipped. Flat structures are called reno mattresses. They are most often used for alignment. uneven surfaces, strengthening sites on the slopes or banks of ponds. Artistic designs can be the most different shapes. Basically, they perform only a decorative role.
Before you start making gabions from a welded mesh with your own hands, you need to prepare the following tools and materials:
staples;
metal spirals:
metal mesh;
hammer;
pliers;
plumb;
shovel;
material for filling the structure;
geotextile;
stapler for wire;
steel pins.

On sale you can find ready-made frame parts for creating such products, but they do not always correspond the right size. Therefore, it is better and cheaper to make gabion structures with your own hands. Even the smallest structure will weigh quite impressively, so it should be assembled immediately on the spot.

In construction stores, ready-made frames for building gabions are sold.
First of all, you need to prepare the base. Depending on the dimensions of the product, such work is performed in different ways. For example, for small structures it will be enough to remove upper layer earth or just tamp it well. But for overall products, pillows should be made of sand with a thickness of about 20 cm.
In order for the finished building not to overgrow with grass, you need to make a small groove around its perimeter, about 15 cm deep. After that, it should be covered with a geotextile sheet or an ordinary black film, and one edge should be folded under the future structure.
Gabions made of metal mesh must be cut according to a previously prepared drawing, but for this it is necessary to accurately calculate the dimensions. Once everything is ready, you can start the installation process. Fits first Bottom part structures, and after that the sides are already attached to it with wire or staples. All ends of the wire must be twisted well or secured with pliers.
In long boxes, additional transverse panels should be installed - they will protect the building from bursting. Such panels are also braided with wire with side walls and bottom. If the structure, on the contrary, is high, then all its internal corners should be fastened with reinforcement bars.
To strengthen the finished building, you can also additionally use reinforcement. In this case, it is welded together, and then attached to the grid. All welded seams should be treated with anti-corrosion agents. The upper side of the gabion must be left open, as it will be filled with stones or other material through it. The final stitching of the structure is carried out only after the complete filling of the entire volume and upon completion installation work.
The appearance of the gabion depends only on your imagination, with the help of stones of different colors you can create interesting patterns.
It is possible to lay small stones of the same size in bulk, but always in several stages with compaction of each layer. If materials of different sizes are used for filling, then large ones creep in on the sides, and small ones fall asleep in the middle.

In the process of work, you can combine materials various colors, size and type, so that the finished composition will look even more interesting and original. If there is not enough material to fill the finished structure, then you can go for a trick. To do this, the stones should be laid out close to the grid, and the space in the middle can be filled construction waste or just rubble. The main thing is that the inside should not be visible from under the stones.
For the manufacture of such buildings do not need any specific skills or experience. The main thing is to keep general recommendations and strictly observe the parameters in the developed drawing.
Advantages of gabions
Grid gabions in landscape design are effectively used for zoning the territory. With the help of such structures, you can, for example, highlight a recreation area or a playground. Moreover, even to create high and large buildings, you do not need to use specialized construction equipment, but you can quickly and easily do everything with your own hands.
These products are highly durable and throughput. If gabions were collected from quality materials and in compliance with all the basic rules, then they will serve for many years. And also these structures have high hydropermeability, due to which conditions for stagnant water are not created.
Such buildings are not afraid of seasonal soil displacements. In this case, they can only slightly deform. Over time, various plants begin to grow between the stones in the grid, but thanks to this, the structures only become stronger and more reliable. And they don't require additional service and care.
If you install a tabletop on top of a rectangular gabion, you can get a durable garden table, which does not need to be brought under the roof for the winter. Also from these buildings you can easily make a gazebo, terrace, plant containers and even a fireplace.
Per Lately gabions are becoming increasingly popular with owners country houses. This is all due to the fact that such constructions combine reliability, practicality and visual appeal. And thanks various materials, which are used to fill the structure, you can create interesting and unusual compositions.

For many years, the main function of gabions was that they were used to increase the strength of redoubts in military developments. Nowadays, with their help, they form the coastal part of rivers and lakes, strengthen slopes and make retaining walls. Recently, gabions are increasingly used in the design of landscape design. For example, fences, flower beds, low fences, etc. are made from them. This article will step-by-step instructions on how to make gabions with your own hands, but first we will look at the advantages and features of these designs. The article will also talk about materials that can fill the internal space of gabions.

The high demand for gabions is due to a number of their advantages:

Naturalness of the structure. As for the gabion fence, it will be in harmony with the landscape and environment. Such a product is monolithic, and therefore reliable.
High strength. Gabion successfully copes with heavy loads. This fact allows them to strengthen the banks of reservoirs.
Availability and ease of construction. A gabion fence is 60% cheaper than its counterpart made of brick and reinforced concrete. For its construction, you do not need lifting equipment and any special knowledge.
High level of sound absorption.
Environmental Safety.
Durability.

If you are faced with the choice of material for the manufacture of the fence, then you should think about gabions. It is generally accepted that the fence should be made of brickwork, corrugated board, metal, wooden picket fence or reinforced concrete. Each of these designs has a number of disadvantages.

If you are a connoisseur original ideas, then we recommend that you familiarize yourself with gabions as a material for the manufacture of fences. These are a kind of bulk fences that preserve the natural attractiveness of the internal filler, such as stone or wood. These railings go well with decorative flowers and lawns.

If stone structures need to be connected cement-sand mortar, then gabions do not require this, since the stones are held by an inconspicuous frame.

A gabion fence may have different sizes, thickness and height. Individual elements can be installed tightly or at some distance from each other. Before buying or self-manufacturing gabion, it is important to identify it functional purpose and surrounding landscape elements. Paths paved from the same stone, artificial ponds and bridges, as well as flower beds from pergons will look good.

Gabions also work well with hedges. Fences filled with blue-gray or pink marble, as well as white limestone, look spectacular. With a competent approach, even the most ordinary stones of large sizes can become an exquisite decoration of a personal plot.

Photo instruction

This photo tutorial shows how to make a simple gabion fence:

Traditionally, gabion nets are filled with quartz, granite, sandstone, large pebbles, quartzite or broken bricks. If you decide to fill the gabion with such material, then you should consider the following points:

Stone size can vary from 7 to 40 cm. The material must be uniform and dense. It is important that the diameter of the mesh cells be smaller than the diameter of the stones, otherwise they will fall out of the structure.
The shape of the stones also matters. They should be rectangular, sloping or round. The use of flat forms is unacceptable.
By strength stones should not have an indicator less than 1000 kgf / cm 2.
Aesthetics- the filler should be attractive. It is important that it is in harmony with nature.
Frost resistance. The stones must be suitable for the climatic conditions of the area in which the gabion will be installed.
If we are talking about filling the gabion with granite, it is important to consider degree his radioactivity.

It is not necessary to use stone as a filler. From extraordinary materials are often used:

wooden cuts;
glass;
pieces of pipes;
firewood;
paving stones;
broken tiles;
crushed concrete.

Below will be step-by-step instruction for the manufacture of gabions, which will help you do all the work yourself.

So, for the manufacture of box gabions, you will need:

galvanized chain-link mesh with PVC coating, which will prevent metal corrosion;
reinforcing bars Ø 6–8 mm used for the manufacture of stiffeners and gabion frame;
flexible galvanized wire Ø 3 mm, used to attach the mesh to the frame;
filler - stones or other materials listed above that exceed the dimensions of the mesh cells.

The first step is to weld the gabion frame from 4 long and 8 short reinforcing bars. On the sides and in the plane of the bottom of the frame, weld several vertical and horizontal rows, thus giving the frame the appearance of a lattice box.

Before installing the frame, prepare the soil. First, dig a trench under the gabion 15 cm deep. Then make a sand and gravel cushion. So that the weed does not germinate and does not spoil the gabion, and in order to avoid direct contact of the metal with the ground, it is necessary to waterproof the base.

The frame of the cell can already be moved to the place of permanent deployment. Now the gabion needs to be covered with a chain-link mesh, fixing it on the reinforcing bars with wire. After that, the gabion should be filled with filler. It is worth noting that the chain-link gabion looks very attractive. In terms of strength, it is not inferior to its purchased counterpart.

The finished design will serve you for many years, but it still depends on the aggressiveness external environment. Over the course of 5–10 years masonry is so compacted that the strength of the lattice no longer plays such important role. But if you want the structure to continue to be attractive, then it is better to replace the worn mesh layer in a timely manner.

So, based on the information provided, it is not difficult to make a gabion on your own, and this pleasure will cost you inexpensively. However, it is worth noting that purchased gabions are more durable, and you will have to spend much less time to install them.

Video

You can learn more about how gabions are made by watching the video:

Photo

Gabions are supporting and decorative structures made of a strong metal mesh filled with stones. From military fortifications, gabions have turned into structures for landscape design. Since the 16th century, such products have been used to build defensive fortifications for guns and trenches. In the 19th century, builders became interested in gabions - with their help they strengthened steep slopes and areas with unstable soil, erected supports for bridges and dams, and strengthened river beds. Modern landscape designers with the help of gabions equip fences, terraces and create small architectural forms.

Interesting! Properly made gabions are as strong as a concrete slab! The main thing is to choose the right materials.

Mesh and stone for gabions

The basis of the gabion is a strong galvanized or PVC wire, its thickness varies from 2 to 6 mm. Welded or mesh blocks are fastened together with brackets or clamps. If the structure is massive, special cables are used to give it stability. The cell structure can be different: polygonal, square, diamond-shaped.

Important! For the production of gabions, the chain-link, familiar to summer residents, is not suitable. It does not hold its shape well and bends under the weight of stones, which means it will not last long.

Various stones are used as filling of the gabion - basalt, granite, quartzite, cobblestone and others. For small architectural shapes fit pebbles, rubble, sandstone. There are no special requirements for shape or appearance, but the size of the stone should be 25-50% larger than the cell size.

The main types of gabions for summer cottages

Cylindrical. Quite flexible but strong. Suitable for strengthening riverbeds, slopes prone to landslides, the construction of retaining walls.

Rectangular. They often make fences, outdoor benches, arches and other elements.

Mattress-mattress. Gabions with a flat surface, most often low. They can serve as the basis for a foundation or other structure.

Arbitrary form. This group includes small architectural forms - vases, sculptures, columns, flower beds.

The main advantages of gabions

Flexibility. The wire base allows you to give the structure the desired shape and realize your own ideas. design ideas in life.
Strength. The gabion is not subject to deformation, it is resistant to soil movements. Provided that high-quality materials are used, the structure will serve for decades.
Profitability. Expensive materials are not used for the manufacture of the structure.
Water permeability. Since the gabion is primarily a protective structure, it does not impede the movement of water.
Various forms and sizes. valuable quality for landscape design, you can even make non-standard objects.
Ease of installation. Special equipment or a team of builders is not required, one person will cope with this task. By the way, care for gabions is also not necessary.

What can be done from gabions in the country?

Support wall. Actually, the original purpose of this element. Helps protect the site from landslides, strengthen the soil and the foundation of the house. In order for the wall to fulfill the task assigned to it, it is important to correctly calculate its dimensions: take into account the mass, wind intensity, and soil quality. When erecting structures with a height of more than 1 meter, it will be required strip foundation.

Gabion fence. This fencing is original, easy to install and durable. A gabion fence is mounted on a point foundation, no more than 50 cm deep. If desired, gabions are combined with boards, concrete slabs, brickwork, vertical gardening.

Facade finishing. The gabion facade does not need to be painted, puttied and constantly repaired. The structure is fastened with an anchor method and has good sound absorption.

Hearths and fireplaces. Gabion can become the basis of an outdoor hearth or a garden fireplace with an open firebox.

Practical furniture. Coffee table gabion mesh with stones and wood or glass top will decorate the garden! You can pair it with wonderful benches or ottomans. And so that it is not hard to sit, provide removable pillows.

Borders and flower beds. Life hack: to make gabions look more interesting, you can fill them not only with stones, but also with wood, glass blocks and etc! They perform an exclusively decorative function, so the requirements for loads are minimal.

Artificial reservoirs and fountains. The gabion mesh is very plastic, so you are not limited in the choice of sizes and shapes.

Columns, vases, sculptures. They can be used both as an independent element of decor and as coasters for flower pots or kitchen utensils.

Gabions are combined with natural and artificial materials and will decorate your summer cottage!

The material for the creation of which are stones that are not bonded with a solution. This design is called gabions. If desired, it is very simple to build such a fence of stones. Gabions are used in the construction of wind protection, hedges. Using such structures, it is possible to strengthen the shore of lakes and ponds, create original elements decor in the garden. In order to understand how to lay gabions with your own hands, you need to familiarize yourself with the functions, types of designs, and the material used to make them.

What are the functions of stone structures

Gabion structures are successfully used in construction. Among the main functions it is worth highlighting:

Protection of the site from the winds.
Strengthening the coastline of various water bodies.
Using gabions, you can regulate the riverbed and organize an embankment.
Creating hedges in areas of any size.
Protection against the convergence of large masses of snow.
Use for decorative purposes.

Advantages of gabions

A wide range of applications of gabions speaks of the advantages of the design:

During the installation of the frame, the gabions are bonded with galvanized wire, which makes it possible to speak about the strength of the structure, capable of withstanding heavy loads.
In the process of absorbing various sediments by gabions, they are not destroyed. During erosional erosion, the base of the structure is slightly deformed, while remaining strong.
During the installation of the structure, there is no need for construction equipment and the creation drainage device. It is enough to buy stones. Moreover, they do not need special processing. Therefore, this method of strengthening significantly saves money.

Given the shape of gabions, they are divided into box-shaped and cylindrical. Sometimes you can find flat rectangular products, the thickness of which reaches 30 cm. This type of structure is used to strengthen the coastline, in the construction of retaining walls.

Cylindrical structures are used to create underwater foundations from box gabions.

Making gabions

To complete the work, you will need step-by-step instructions for the construction of the structure. Before proceeding with the construction of gabions, it is necessary to choose a place for construction. The preparation stage includes tamping the soil.

Preparation of materials

It would be useful to make a foundation with a pillow. It uses crushed stone and sand. You will also need a metal mesh. At the same time, it is important to correctly calculate the load level so that in the future the structure does not collapse.

An excellent option would be a mesh with PVC coating or stainless steel.

The color of the stone depends on individual preferences and ideas. The size of the material must match the grid cells. When choosing stones, it is worth considering their density and frost resistance. Especially these parameters need to be paid attention if the structure will be under the influence of water. Most often used:

granite;
diorite;
quartzite;
basalt.

No less popular is sandstone, which is frost-resistant.

If you need to build a gabion above the water surface, it is important to choose a stone that is 30% larger than the cells. For underwater structures, stones that exceed the cell size by 50% are suitable.

Frame preparation and installation

The mesh is cut to size and stitched, adhering to the intended shape. For this purpose, welding or a strong wire is suitable, the ends of which are inserted into the stone filler. If the gabion is long, you need to take care of the partitions. The design should be filled gradually. Today, gabions on the market can be purchased unassembled, so it will be very easy to transport them.

stone laying

Once the structures are placed in the right place and linked to adjacent sections, they can be filled with stones.
Brick, flat pebbles and large stones are laid by hand.
Small stones can be poured out and compacted.
If the mesh reaches a height of 0.5 m, the stones are laid on its third, then the front and back wall strong wire.
Lay another layer of stones.
Repeat the procedure for bonding the two walls.
Stacked last layer stones.

It is worth remembering that flat gabions can be filled immediately. In the case of filling gabions in layers, the lower one must be covered with a stone 5 cm above the container, taking into account shrinkage.

For structural strength, it can be reinforced with rods that are installed inside the frame half a meter apart.

How to build a fence

In the natural landscape, a gabion fence will be an ideal protection that will last a long time without much maintenance. A feature of the construction of the structure is that more space is needed for its construction than for a conventional fence.

Install stone wall directly on the ground, without a foundation. For its reliable fixation, it is necessary to install steel poles at regular intervals.

First of all, you need to dig holes for the posts. The depth of the holes depends on the height of the future fence.
The pillars are placed in pits with pre-poured concrete, which must be carefully compacted. It is important to install the posts evenly. The plane of the fence depends on this.
It is necessary to give time for the concrete to harden (three days).
A wire frame is fixed around the fence, in which the stone will be laid. The work is carried out with the help of nuts, clamps and washers. For a low gabion, you can make a frame from a chain-link mesh.

After installing the mesh, one should not forget about treating the wire with anti-corrosion agents.
When laying out the stones, it is advisable to link the mesh with extension brackets. Fill the frame evenly. In this case, it is advisable to use multi-colored stones and materials of a rare breed. The main thing that appearance the fence was not knocked out general style site.

Fences in which stones alternate with layers look very original. fertile soil, with unpretentious plants planted in it.

As you can see, many people can make a gabion, but in order for it to last as long as possible, it is important to follow the recommendations outlined in the article.

Video

Watch a short animated video that shows the process of creating gabions step by step:

In this video you can see a variety of gabion structures:

Photo

A gabion is a large metal cage made from twisted wire. This design is very simple to manufacture and place on the territory of your site. Such a design is not expensive, and at the same time reliable in use. She doesn't need any extra care.

Advantages of gabions

If we compare gabions with other similar structures, it becomes clear that gabions have great advantages. Their advantages include:

high strength, as it is able to withstand heavy loads;
each mesh structure can be attached to another, for this you need only galvanized wire, as a result you can get a monolithic structure;
they blend well with the rest of the landscape, so over time, the effectiveness of such a structure will only grow;
low costs for use and installation;
ease of installation due to the low weight of the product.

Gabions have many advantages, thanks to which they received wide use in various sectors and areas.

Varieties of gabions

Depending on the type, the following gabions are distinguished:

box-shaped;
cylindrical;
flat.

It follows that frame form will look like a cylinder, a flat figure or the shape of a box, it must be made from a mesh or from a welded structure.

In a welded structure, the bars, which are laid perpendicular to each other, are welded at the intersections. Welded boxes have a rectangular shape; in order to connect the walls, a wire spiral is made.

The mesh structure is created by attaching a steel mesh to a rigid frame. Each cell of such a grid is hexagonal in shape.

How to make gabions with your own hands

Before you start making gabions, you should take care of the availability next material which you will definitely need:

metal mesh, the thickness of which should be from 0.2 to 0.8 cm, depending on the parameters of the product. In this case, it is worth considering the features of operation;
fittings. With the help of it, the frame is strengthened and rigidity is given to it;
staples for wire and metal spirals. These materials are used to hold structural parts together;
geofabric. This material is required in order to create a reverse filtration, as well as to reduce the consumption of sand or other material for the embankment during the installation work.

Be sure to stock up on stones. If appearance is the main thing for you, then choose the material, different colors or unusual shapes. To do this, you must give free rein to your imagination.

To carry out work on the manufacture and installation of gabions, you need simple tools, many of which you probably already have: pliers or pliers, a stapler for mounting, a mount, a shovel and anchors.

Attention ! If reinforcing bars are used in the manufacturing process, then welding must be used, since tying the parts with wire is a rather difficult process, which, moreover, cannot guarantee the required rigidity of the frame.

We make a frame

Since the weight of even a small structure will be significant, the manufacture and assembly of the gabion frame must be carried out at the place of its installation.

The gabion manufacturing process takes place in several stages. To begin with, we will prepare the base, if possible, then it is better to strengthen it, for example, tamp the soil or remove the top layer of soil. Use sand to make a pillow, the thickness of which will be from ten to twenty centimeters. Everything will depend on the weight and parameters of the gabion.

Attention ! If a fence is being erected from gabions, then at a shallow depth it is necessary to equip a strip foundation. This is especially necessary in cases where gabions are combined with sections made of traditional materials.

To prevent grass and other weeds from growing on the gabion net, it is necessary to make a shallow ditch around the entire structure. After that, the ditch should be covered with a geotextile or ordinary black film, fixed by bending one edge under the future structure.

Then it is necessary to cut the mesh in accordance with pre-calculated dimensions and proceed to its connection.

First of all, it is necessary to install the bottom of the structure, and lay the sides to it and fasten them together with metal wire. The remaining wire must be tightly twisted and fixed using pliers.

If your gabion needs to be quite large or with one of the sides disproportionately long, you need to consider stiffening diaphragms. One of the sides must be open so that the structure can be filled with stones.

The last stitching should be done after all installation work is completed and the entire volume is completely filled.

After completing all the work on the manufacture of the frame of the structure, it must be finally installed and fixed. To ensure the strength and reliability of the structure, not only due to its own weight, the structure should be fixed with anchors or homemade stakes. You can also use reinforcement, the diameter of which should not exceed 1 cm.

In the manufacture of a structure consisting of more than one tier, it is possible to allow the possibility of saving material, for example, in the construction of fences. In this case, the gabion mesh of the lower tier can become the bottom for the upper tier.

Filling the gabion with stones

After prefabricated structures installed and rigidly fixed to each other, you can proceed to the next step - laying stones. This is not a difficult stage, but requires compliance with certain rules:

you need to start filling when the gabion is in its place;
if stones of various sizes are chosen for internal filling, then large ones should be laid along the edges, and the center should be filled with smaller stones;
if you use small stones that are of the same size and shape, then you need to lay them in bulk, in several steps with compaction of all parts;
with a gabion height of more than 1.5 meters, stones should be laid in several layers, the thickness of each of them should be from 15 to 25 cm. In addition, after the structure is 1/3 filled, it will be necessary to make stretch marks, which will opposite sides are fastened in order to prevent deformation;

Advice ! If the structure has a height of more than a meter, then this procedure should be done again after a certain interval, for example, after filling two-thirds and three-quarters of the volume

if the gabion will consist of many levels, then the bottom row should be filled with stones, taking into account their shrinkage under the influence of their own weight, as well as under the action of an external load, so they need to be filled on average 5-7 centimeters above the upper edge of the structure;
sometimes it is possible to allow the use of stones that have a smaller fraction than the parameters of the cell, but then they must be laid in the middle of the structure or at the bottom of the structure, they must first be wrapped with geofabric, which will not create an obstacle to water, seeping through the gabion, but at the same time will not let it wash the filler from the gabion;
after the installation and filling of the gabion is completed, you need to perform the last step - cover installed design cover and fix it with a metal spiral of wire.

Advice ! To ensure that the stones do not move and the image does not lose its appearance, follow the steps in several stages. Lay out the stones by hand, be sure to compact each layer in the gabion.

Conclusion

Gabions are a good tool to cheaply and cheerfully create decor in your personal plot or garden. This type landscape design is flexible and mobile. And it gives free rein to your imagination.

Your masterpieces will look respectable and beautiful. And most importantly, the manufacture of a gabion can be done with your own hands and with minimal cost. Show a little imagination and fantasy, be a designer, create and give joy to your loved ones and others. After all, when such beautiful elements of landscape design as gabions delight your eyes, your mood will improve and your soul will be light.

What is a gabion in landscape design? Fabrication designer lessons