Coloring plaster bark beetle. Painting decorative plaster in two colors

Bark beetle is rightfully considered one of the most popular coatings for interior and exterior work. The fact is that it is quite easy to apply to the surface, and the resulting pattern is distinguished by its aesthetic originality. But in order to achieve a more significant effect, it is necessary to paint the bark beetle. This is done in various ways, each of which allows you to get the desired result.

What is so attractive about this plaster? There are a number of undeniable advantages that distinguish this mixture from others:

1. A very strong layer is created, which is also distinguished by safety. That is, the composition does not emit harmful substances.
2. Minor load on the walls. This is due to the low weight of the material.
3. Not afraid of temperature changes and high humidity. It can retain its properties for several decades.
4. Does not shrink. Due to this, cracks and other damage to the coating do not form.
5. Ease of use. In addition to the fact that professional skills and special tools are not required for application, subsequently, caring for it is not much of a hassle.
6. Rich range of colors. In fact, the initial layer of the material is white, which gives room for imagination. Namely - use any shades.

Bark beetle plaster is easy to apply

What paint to choose?

It is the last point, which refers to the advantages of bark beetle decorative plaster, that can be considered the most significant when it comes to creating an individual interior.

On a note! It should be understood that a special bark beetle paint, which is intended specifically for such work, does not exist. Therefore, you need to focus on the available materials.

Preference should be given to the most common options.

oily

This suspension allows you to create a very bright and saturated surface. But there are also numerous disadvantages. Among them are especially distinguished:

• Almost complete lack of vapor permeability.
• Fear of exposure to alkaline substances.
• Slight fire resistance.

In principle, this option is already considered obsolete for this kind of work. Therefore, it is preferable to give preference to more modern compositions.

Oil paint allows you to create a bright finish

Alkyd

An excellent composition, but it is better to use it for work carried out outdoors. The reason for this is simple: this mixture has a very specific smell, which can be weathered (indoors) for many years. But there are also pluses:

• Low price.
• Neutrality to influence of temperature and humidity.

Alkyd paint has a specific smell

Acrylic

Many specialists who professionally paint bark beetle plaster prefer this particular suspension. She deserved this attitude for the following reasons:

• Environmental friendliness. The mixture is completely safe.
• The components included in the composition, namely acrylates, make the coating strong and very durable.
• Variety of color shades. There is a lot of room for imagination.
• Vapor permeability. That is, the wall will breathe and the structure of the coating will not be disturbed.

Acrylic paint is the safest to use

It can be concluded that this material is indeed the optimal solution.

What does staining

Naturally, staining is not the only solution. The color scheme is achieved in other ways: adding color to the mixture, waxing or applying varnish. But it is the paint that has a number of advantages:

• It is possible to get a unique solution for creating an interior. There is an opportunity to create interesting design options. Especially if you apply several shades at once.
• An additional protective layer appears.
• Even a small room can be divided into several zones without using additional materials.

The use of color allows you to create an interesting design

It seems that there can be no shortcomings. It's not entirely true, they exist.

1. You have to put in a lot of effort. The fact is that the process itself is very laborious. It will take a lot of time, sometimes even more than the application of the plaster itself. This is due to the complexity of the relief, so the colorful composition is distributed unevenly. You have to work with several tools: a roller, a brush and a sponge.
2. If you limit yourself to only one shade, it is difficult to get an interesting result. Although no one forbids applying everything in one uniform layer. But there is a high probability of getting a rather ordinary wall, devoid of any individuality. That is, the texture is simply leveled.

If you carefully compare the pros and cons, it becomes clear that the latter relate to the works themselves, and not to the resulting properties.

What else do you need to know

• To get a surface that will differ in individuality, but reduce labor costs, do the following: the desired color scheme is initially added to the mixture, echoing the color of the paint.
• When choosing a material in a store, pay attention to the manufacturer and the availability of the necessary certificates. It should be understood that the market is flooded with fakes. After applying them to the wall - there are many problems. Sometimes it comes to the fact that you have to completely remove the texture layer.
• You need to wait for the plaster to dry completely. It often happens that you want to finish the work faster. The result of such a rush is stains, swollen and destroyed areas.

Observing the technology, you can achieve a stunning effect.

For more convenience, use the following tools:

1. Roller with a medium pile (with a short pile - it turns out a great effect, but experience is needed).
2. A set of brushes: wide and small.
3. Sponge, but better mittens.

On a note! The roller with a long pile perfectly covers the wall, it is possible to immediately process large areas. But a lot of composition accumulates in the recesses, it dries for a very long time and poorly, cracks and swelling appear.

Various color options

To understand how to paint a bark beetle, you should consider several options, each of which is suitable for a specific situation. In principle, all methods are quite similar, they allow you to achieve an excellent effect, but differ in technology. Therefore, it is very important to follow the steps of each process.

The first option is the initial tinting of the mixture

It is considered the simplest option that anyone can implement, even without building skills. But another problem arises - you need to correctly and in the right amount add the selected color to the mixture, and also combine it with subsequent coloring.

Applying colored plaster

This event looks like this:

• Kohler is applied at the initial stage of mixing decorative plaster. This is done based on the amount of the prepared mixture.
• Next, work is underway to apply the composition to the surface.
• Waiting for complete drying. In terms of time - it is better to lay at least two days.
• Now they are coloring.

You can achieve different effects:

1. Same color range. To do this, use a light base layer and a darker final one (or vice versa). And also everything can be painted in one color, it will just be much brighter.
2. Games of contrasts. This requires the use of a completely different final layer, markedly different from the base.

Contrasting staining of bark beetle

Advice! If possible, then tinting (plasters or paints) is best entrusted to special devices. This service is found in many hardware stores. You can get the best result.

The second option is double coloring

The method described above is really good, but an insufficiently reliable protective layer is obtained. Many grooves remain insufficiently well stained. Therefore, bark beetle painting in two colors is carried out in order to obtain a reliable and very high-quality coating.

The technology is:

• The first layer is applied in a continuous thick layer. It is necessary to ensure that all the recesses are completely filled. Due to the fact that the paint turns out to be quite a lot, it begins to accumulate in the recesses and streaks appear. This is removed by using a sponge to blot the surface.
• Wait until the first layer is completely dry. The time depends on the selected composition and temperature indicators. Now paint a second time. This is done with a small pile roller. They work quickly, covering predominantly convex structures.

Bark beetle plaster staining options

The third option is to use a primer

This method is a bit similar to the first and second, but is used in cases where you need to work on an existing bark beetle that has not been tinted. So:

• The selected color pigment is added to the primer solution. It is possible to fill all the pores and create the first colored layer.
• But it turns out a rather unattractive surface. Therefore, a second layer is applied. Of course, the effect will not be so noticeable, but the result will be acceptable.

On a note! Before using the chosen method, it is better to conduct a small experiment first. To do this, paint an inconspicuous area in order to understand what result should be expected.

Coloring decorative plaster Bark beetle is a matter that requires a responsible attitude and labor costs. But this is more than offset by the result.

Coloring bark beetle in two colors

Coloring bark beetle in two colors

A wonderful thing, this decorative bark beetle plaster! Its convenience is that the cement base makes it possible to use it in places such as the facades of buildings and private houses. She tolerates the outside environment well. And if we take into account the apartment, then balconies and loggias, even glazed, even open, are an excellent opportunity to use this type of finish. Decorative bark beetle plaster is easy to use, no special skills are required for application, as is necessary when working, for example, with Venetian decorative plaster. But there are downsides. For example, painting bark beetle decorative plaster in two colors causes difficulty for many. Let's look at options and ways to solve this problem.

About the minuses of the bark beetle

Minus number 1. Difficult to color.

This is actually a bit of a challenge, as the texture is such that the finished surface has numerous indentations, similar to indentations in a tree eaten by a bark beetle. Here to paint over them - this is the biggest difficulty.

You need to take a thicker roller and soak it well with paint. The paint will flow into the depressions, then flow out from there, and accumulate ugly on the plane. You will have to collect it with a roller. And after all, in these recesses there will still be non-painting, which will have to be tinted with a brush. In general, suffer, and think about what would be better not to paint.

Minus number 2.

After painting in one color, you really understand that it was better not to paint, since a bark beetle painted in one color looks good only if it is made perfectly. And if you only once or twice tried to make decorative bark beetle plaster with your own hands, then you are still far from ideal.

But there is a way to fix everything. Paint the surface a second time with a different color. But with such a condition that only the plane is painted, and the stripes, furrows and potholes remain in their original color. It already looks quite original. So if that's the case, then go ahead. Paint with a different tone on top of the already painted one.

How to paint a bark beetle in two colors

But there is an opportunity to avoid the pain of painting the inside of the texture. The method is quite simple. It consists in adding color to the plaster solution when it is kneaded. Then, during the manufacture of the decorative layer, it will already have the original specific color.

Perhaps you have an idea how to ensure that the batch does not differ in color from the batch? It's actually quite difficult. But in fact it is not necessary. An approximate tone for each batch will be enough. At first, you will get a difference in the palette of different batches.

The project "Wet facade - the secrets of installation" - stage 20 application of decorative plaster "bark beetle"

Related Tagged Posts

Contents Do-it-yourself decorative plaster on walls How to apply decorative plaster Applying decorative plaster How to apply decorative plaster: masters share their experience Bark beetle. Application of decorative plaster on the walls. Experience 14...

Contents Decorative wall painting with your own hands Working with textured paint How to paint walls with textured paint Painting decorative plaster - tips and tricks LLC - NikaWood - high-quality wooden windows ...

Decorative plaster with the texture of "bark beetle" is one of the most popular: it is easy to apply, looks good, and is inexpensive. A variety of bark beetle variants can be found on any building, anywhere in the country, how and with what paint to get an evenly colored layer on a textured surface? We'll tell you in the article.

As a rule, ready-made pastes from different manufacturers are taken for decorating walls, which are white or light gray in color. It is not enough to create a beautiful texture on the facade; to increase its service life, it must be painted. This is the main reason why coloring is required, but there are others:

• paint creates a dirt-repellent layer, thanks to which the facade remains clean and attractive longer;
• the paint layer reduces the absorption of moisture, preventing the peeling of the plaster in winter;
• by painting in different shades of the same color or in different colors, you can achieve different optical effects, enriching the plasticity of the facade, making it more decorative and attractive.

It is advisable to select the paint for painting in accordance with the composition of the plaster: for acrylic - acrylic, for silicone - of the same composition.

Disadvantages of staining

Painting is an additional financial and time cost: by hiring craftsmen, the savings from self-applying plaster will come to naught, and do-it-yourself painting will sometimes take more time than plastering, especially if you do it in several shades.

Improperly selected paint can destroy home insulation efforts if the plaster was applied in the thermal insulation system.

Types of paints

For painting the facade, the most important is the vapor permeability of the paint layer: walls made of materials such as wood, cellular blocks of foam concrete or gas silicate, insulated according to the “wet facade” system, must breathe - that is, give out water vapor from the thickness of the wall, otherwise in the internal the humidity regime is disturbed in the space of the house. Over time, this leads to the formation of mold and mildew.

Consider the main types of paints used for exterior decoration.

oily

Oil paints - the oldest and cheapest composition for painting different surfaces, are completely unsuitable for the facade, especially for the insulated one:

• zero vapor permeability;
• low light and frost resistance - quickly fades and exfoliates;
• small color range;
• lack of resistance to alkaline environment;
• high flammability.

Even a low price will not make oil paint an attractive option for painting a facade, oil paint can be used to paint a fence or walls in technical rooms where only a durable moisture protection film is required at a budget.

Alkyd

Alkyd compounds are produced on the basis of pentaphthalic (PF brand) and glyphthalic (GF brand) varnishes. The most famous version of the alkyd composition is PF-115 pentaphthalic enamel. The main characteristics of alkyd paint for painting exterior walls:

• vapor permeability - low;
• light and frost resistance meet the requirements for paints for outdoor use;
• chemically resistant;
• durability - 5-7 years;
• low price;
• a poor palette of colors - only 24;
• high flammability.

Compositions based on alkyd resins contain a solvent, and therefore have a sharp unpleasant odor that disappears after drying. In bright sunshine during the summer heat, if the facade is painted in a saturated color, the smell may appear again.

Acrylic

Acrylic paints are the most environmentally friendly and safe:

• practically odorless;
• vapor permeable;
• frost-resistant and light-resistant paints designed for outdoor work;
• durability over 10 years;
• the widest range of colors, easily tinted in shades according to the RAL system, 3D +.

Thanks to these properties, experts most often use acrylic paints for facade work.

Some shades of acrylic compositions are used to a limited extent for the most loaded surfaces, for example, a plinth: the blue dye is the least light-resistant, therefore it fades in the sun.

Which one is better to paint and how to calculate the consumption correctly

After analyzing the characteristics of the paints offered for sale, it is easy to choose the desired composition. Acrylic paints are very popular due to their durability, safety and low cost.

In addition to acrylic, silicate, silicone and latex paints are used for facade work, which have sufficient vapor permeability, light and frost resistance, longer durability than acrylic, but at a higher price.

To calculate the paint consumption, you need to know the surface area, for painting in several colors - the area of ​​\u200b\u200beach color, and hiding power - paint consumption in kilograms or liters per 1 m2 with 2-layer painting. Spreading power is indicated by the manufacturer of the composition on the package: if the weight is indicated, then the hiding power is given in kg / m2, if the volume is indicated, respectively, in l / m2.

The easiest way to calculate the required amount of paint can be according to the scheme of the facade: draw the facade with dimensions, it shows all the openings and borders of different colors. According to the scheme, the areas occupied by paint of different colors are calculated, minus openings. The area is multiplied by the hiding power. 10% is added to the obtained value - for possible errors and repaints during operation.

IMPORTANT: when calculating, do not forget about the areas of window and door slopes.

Painting decorative plaster - technology and methods

For the first penetration, all the recesses of the relief are carefully painted over, for this they take paint of a thicker consistency, carefully shade it over the surface of the wall. Inevitable streaks are removed with a foam sponge. The paint must be completely dry before re-painting.

For the second layer, the paint is selected in a lighter or darker shade, depending on the desired effect. Thick water-dispersion paint can be slightly diluted with water, solvent-based paint can be diluted with the appropriate composition. Mow the most convex places with a roller with a small pile.

After the paint layer has dried, for an additional color effect, lightly wipe the most convex places with a fine sandpaper.

Conclusion

Coloring a bark beetle with your own hands will require preliminary preparation, free time and financial investments. Haste in painting will lead to an unsatisfactory result, and saving on primer or paint will negate the effect of wall insulation. Only following the painting technology and high-quality materials will give the facade of the house an individuality, reliably protect the walls.

Type of bark beetle plaster - suitable for both internal and external works. Due to the aesthetic originality, the resulting surface looks very attractive. The color scheme is achieved by adding pigment to the composition, waxing or applying a varnish emulsion. To make the effect even better, it is recommended to paint the surface. The bark beetle is painted in two colors by various methods. The two-color method will create a surface with a three-dimensional effect.

How long does the bark beetle dry before painting

For high-quality painting, you should find out how much the material will dry. Different brands dry for different amounts of time. Manufacturers provide all the necessary information on the packaging. The average drying time of the mixture is from 1 to 5 days.

Bark beetle-treated walls are a reliable protection of the surface layer and an excellent decorative solution. It is allowed to plaster walls and ceilings in the kitchen, bedroom and children's room. The material is safe for health and has an affordable price.

Stucco combines positive qualities well. The presence of visual samples allows you to easily select the most suitable composition. Bark beetle plaster is a leader among facing building materials.

The use of a spray gun will make it possible to treat the surface, and apply the composition several times faster and paint the finished structures. Putty hides minor imperfections - this means that the treatment of bases with plaster with the help of bark beetle with further painting will be a profitable solution.

The choice of paint for bark beetle

There is no specialized paint for bark beetle plaster. For this reason, the most suitable building materials should be selected. Painting the outside of the house should be done as soon as the putty has dried. It is better to buy dyes with a margin.

Note! It is better to choose a combination of shades according to color palettes or on the recommendation of professionals. Paint for the facade of the bark beetle is presented in a wide range. The choice is huge - from brands of manufacturers, to a color palette.

oily

The emulsion has a large selection of shades, the surface is rich and bright. Of the negative qualities note:

• vapor permeability is absent;
• the painted surface is afraid of the effects of alkaline elements;
• low resistance to fire.

For bark beetle-style decorative plaster, oil paints are considered obsolete. For this reason, it is recommended to use innovative component mixtures.

Alkyd

The suspension is great for outdoor work. Due to the fact that the paint has a rich smell. The treated walls inside the premises can be weathered for more than one year. The advantages include:

• acceptable cost;
• resistance to temperature fluctuations and resistance to moisture.

Acrylic

• environmental friendliness and safety for health;
• the acrylates included in the emulsion recipe make the surface layer strong and durable;
• many different colors make it possible to embody the most daring design decisions;
• good vapor permeability allows the walls to breathe without destroying the surface of the structure.

From the above advantages, we can summarize that the texture paint for embossed coatings is the best option. Paint consumption per 1 m2 according to the standards ranges from 180 to 300 grams.

Surface preparation

When carrying out staining of the surface layer, it is necessary to take into account the level of preparation and the nuances that arise due to the uneven texture of the base. The front composition is made with a two-layer texture. The plane has an imitation of the chaotic movement of a bark beetle. The effect is obtained due to the mineral particles included in the plaster recipe.

During grouting, the elements move along the base and form uneven recesses. It is these grooves that cause problems when painting facade walls on their own. When the plastering work has been completed and a full-fledged pattern has formed, it is necessary to erase all unattractive places in the joint area and evenly process the entire surface layer without strong pressure on the pattern.

Note! Is it necessary to prime the bark beetle before painting? The answer is positive. This technique will improve adhesion and extend the life of the front surface.

3 color options

To determine the method of coloring the bark beetle, it is recommended to study each case individually. The three methods are similar to each other and allow you to get a spectacular look, but they differ in the application technique. It is important to observe even the smallest nuances during each of the described stages.

Initial tinting of the mixture

The technique involves adding a pigment to the plaster solution. This option allows you to independently choose the tone and its saturation. The paint stains bark beetle grooves that are difficult to complete when finishing. The technique for applying a decorative mixture does not differ from the standard execution:

• With a construction spatula, the solution is distributed over the surface. After, after 15-20 minutes, when the surface begins to harden, it is overwritten.
• When the plaster ball is completely dry, paint.

The final layer of paint is selected at will and can fully match the pigment that is introduced into the putty. For a contrasting surface effect, it is recommended to choose dark or light tones. During processing with a roller, the tool should not be pressed against the surface. The method will allow the paint not to flow into the recesses. The consumption of the emulsion with this treatment option will decrease. To achieve different results, it is recommended to paint the plaster in the following ways:

• for the same tone, a light base and a dark finish are used (or vice versa). In the same way, they are painted in one gamut, and it will look brighter and richer;
• play on the contrast of colors. To do this, you need to apply the opposite finishing tone, which differs from the main one.

double coloration

The above option is quite good, but it forms an insufficiently resistant protective layer. In many voids, unpainted places are observed. Double painting is performed to obtain a reliable and high-quality coating. The application technique is carried out in the following order:

• the first ball is applied as a continuous thick mass. The main task is to completely fill all the recesses. Due to the thick layer, streaks form. This feature is removed with a sponge, problem areas are blotted with it;
• when the bottom layer is completely dry, staining is done a second time. Drying time depends on the selected paint and atmospheric temperature indicators. Work is carried out at a fast pace using a fine-nap roller. Mainly protruding textures are processed.

Primer use

The option is similar to the previous two, but it is used when working on finished plaster that has not been tinted. For this you will need:

• the selected color scheme is introduced into the primer mixture. This method allows you to fill the porous structure and form the first ball of paint. The result is a rather unattractive surface layer;
• To improve the external qualities, a second ball is applied. The final effect will not be pronounced, but the result will be satisfactory.

Photo examples of houses with bark beetle coloring in two colors

Cottage with painted walls with bark beetle stucco looks great
Bark beetle plaster harmonizes well with various types of facing materials
Styrofoam is used to insulate objects, and bark beetle plaster is made on top, followed by painting
Methods for applying decorative bark beetle plaster
Bark beetle plaster in the interior - a stylish solution

Facade plaster bark beetle is deservedly in demand when finishing facades. Walls acquire a creative appearance - such advantages attract both builders and consumers. This coating can be called universal, since it is used for both private houses and public buildings. Additionally, such a surface can be painted, improving both the decorative properties of the finish and its performance characteristics.

Facing the facade of the house with decorative plaster bark beetle

Why do you need to paint facade plaster?

Decorative plaster for painting is most often white or light gray in color and allows you to create a beautiful texture. And after drying, it can be painted in the desired color, increasing the life of the surface. When painting the paintwork, the finish receives the following advantages:

• The paint has a dirt-repellent effect, so the facade will be beautiful, clean;
• Reducing the hygroscopicity of the material;
• The finish will not flake off in winter, at least to a lesser extent;
• The facade can be decorated with combined coloring, which makes the exterior more attractive;
• The choice of paintwork is determined by the composition of the finishing mixture - for acrylic compositions, acrylic paint is chosen, for silicone, respectively, silicone.

Cons of bark beetle coloring

As for the disadvantages when painting bark beetle plaster, the main ones are time, financial costs. You will have to paint the walls yourself or hire a master. The more shades are used when painting, the more time will be required for such decor.

If the composition is chosen incorrectly, then the effect of warming the house will be significantly reduced.

Various color options

When painting a bark beetle, you can use mono-color or combined options, that is, tinting in two colors.

The first option is the initial tinting of the mixture

There are several ways to paint a bark beetle, and each of them will be optimal for a particular situation. At the same time, it is important to maintain the technology at each stage of staining in order to obtain the expected effect.

Applying plaster with color already added to the mixture

If you do not have much experience, and you are thinking about how to paint a bark beetle, you can choose the easiest option - this is the initial tinting of the mixture. Kohler is added to the finishing mixture, so after applying the plaster, the wall looks already painted. You can leave the facade in this form, or you can make the resulting color scheme the basis for subsequent painting.

Color is added at the stage of mixing the decorative textured composition. In this case, it is worth preparing the entire volume of the mixture at once, since it will not be possible to achieve the same shade in the future. After applying the composition to the surface, it is necessary to leave it alone for at least two days.

The second option is double coloring

Double painting means applying paintwork in 2 layers, which allows you to paint both recesses and the convex part of the surface. The first layer is applied in a thick layer, which allows the paintwork to penetrate into all recesses, so that the paint is not too much, non-periodic we blot the wall with a sponge. After that, you need to leave the wall to dry the surface.

Painting the bark beetle in two layers is carried out to get a rich color.

The second layer allows you to paint exactly the convex part of the structure, so the process is carried out using a short pile roller.

The third option is to use a primer

To color the bark beetle, you can use not only paint, but also a pigment along with a primer - in this case, the coloring composition is applied in several layers, which allows you to paint all the pores, as well as the convex parts. The color is less bright than with double staining, but still attractive.

Choosing a paint

To paint textured plaster, you can use a variety of paintwork, but there are no special paintwork for bark beetle.

oily

Oil paint on plaster

Such paints are distinguished by their rich color, bright shades, but due to their shortcomings, they are not very popular:

• Low vapor permeability;
• Do not resist alkalis;
• Low fire resistance.

They can be called outdated, so it is worth considering more modern options.

Acrylic

It is considered the best option for bark beetle - such a suspension has a whole list of advantages:

• Environmental friendliness;
• Acrylates, which are part of this paintwork, are durable, durable;
• A wide range of colors that allows you to implement any design project;
• Vapor permeability - moisture will freely evaporate from building materials.

Textured

Textured paintwork for the facade

Mainly used for metal. The special filling of such paint allows you to imitate wood that has been eaten away by insects. Textured paintwork for the facade is based on water-dispersion acrylic mixtures. It is worth noting the high service life, high vapor permeability, frost resistance, durability. It allows you to hide cracks, flaws on the surface, to embody any fantasies.

As for the minuses, it is worth noting the high costs, high material consumption, the need for skills when applying such material.

Alkyd

It is intended for outdoor work - during indoor work, the specific smell disappears for a very long time. Of the advantages, one can note a low price, good resistance to humidity, temperature effects.

Structural

Structural wall painting

Another alternative for bark beetles is structural paint, applied with a brush, roller or other accessories. It also allows you to create a certain relief on a flat surface. The cost of such a coating is quite high, but the ability to experiment with texture and the absence of surface requirements make it popular.

silicate

Since silicate compounds consist of glue, silicate filler plus mineral pigments, such a mixture is well tolerated by various negative weather conditions from ultraviolet to wind and snow. At the same time, the LKP layer passes moisture vapor, has a high operational life - about 20 years.

The negative aspects include the possibility of cracks and the fact that such paints quickly lose their appearance. High temperatures also adversely affect the paintwork, causing deformation of the coating.

Mineral

Such compositions are highly environmentally friendly, since they use crushed powder of natural minerals as a color. They are considered environmentally friendly and safe. When dried, such paint forms a polymer film with high strength characteristics.

Silicone

Paint consumption

In order to correctly calculate the consumption of facade paint per 1m2, it is necessary to take into account both the surface area and the number of layers that will be applied to the wall. To do this, it is necessary to clarify the hiding power of the paintwork, which is indicated on the package - this value can be indicated in kg / m2 or l / m2 for two-layer staining. By multiplying the covering power by the total surface of the walls, you need to add 10%, which will allow you to correct errors or repaint the facade during operation. It is this amount of paintwork that is required to be purchased before the start of painting work.

The material for painting the facade finished with bark beetle plaster must be prepared in advance

Technology for painting decorative plaster

To paint bark beetle, follow these recommendations:

Preparatory work

Preparation of the surface for painting consists in the complete drying of the finish - at the same time, it will not be possible to specify the exact time, since different types of plaster harden at different times. Therefore, this may take 8 hours or several days - after that the surface must be primed and left to dry.

Paint application

We paint the surface of the wall with paint in one or two layers in accordance with the chosen application technique, it is possible that a roller will be used when applying the second layer.

Disadvantages of the bark beetle

When choosing textured bark beetle plaster, as well as deciding whether to paint, it is important to take into account all the disadvantages of this finish:

• It is very difficult to repair such a surface, since it is very difficult to restore the texture and color at the site of mechanical damage.
• All works are subject to seasonal restrictions, since finishing cannot be carried out under certain humidity and temperature conditions.
• If the technology for applying paintwork is violated, problems such as swelling, color inhomogeneity, etc. may occur.

Painting a bark beetle in two colors

House facade painting technology