How to make a chandelier with your own hands - tips on choosing a lamp, decor, master class and photo ideas. Original ideas on how to make sconces yourself from scrap materials Make decorative spotlights with your own hands

Handmade projects help us add brightness to the interior and make it individual. One option is to make your own lamp for your home. Unusual details, materials, ideas and a little creativity - and the designer product is ready.

DIY lamps: interesting ideas

There are many models of lamps that you can make yourself. They differ in design, style, and size. A wide variety of materials are suitable for their manufacture - paper, wicker, plastic cups, yarn, fabric, glass bottles, plastic bags, wooden hoops, wire, veneer, old things or what was left after renovation, etc. The easiest option is to make a lampshade with your own hands and purchase ready-made system electrical wiring with a socket. It is accessible even to the most beginners in needlework and creativity.

Wall lamps

Set beautiful homemade lamp You can hang it on the wall near the bed, including in the children's room. Most often, unusual lampshades are made of wood, fabric, or wicker for this purpose. But there are also more original options.

At the dacha we made a lamp from two 0.75 liter cans and two pieces of boards with unevenly cut edges. The boards are connected to each other at right angles, and the entire structure is installed on the wall of the house under the porch. Cartridges are screwed into lampshade jars into which LED bulbs. This style of lamp is ideal for country house or a rustic interior.

Photo gallery: DIY wall lamps

Vine - interesting material for creating original lampshades Lamps made from boards are very easy to make and look stylish at the same time. Threads, glue and balloons are all you need to create beautiful lamps You can make different types of lamps from the board Bizarrely shaped driftwood is an unusual basis for wall lamp Clouds cut from plywood can be used to create a night light Even pallets can be adapted to create a beautiful lamp with your own hands

Table and floor lamps

Using scrap materials, it’s easy to update a floor lamp or make a new table lamp in ethnic, high-tech, or other styles. Beads, ribbons, and paper cutouts are used for decoration.

Photo gallery: interesting models of do-it-yourself table lamps

An eco-style interior can be updated by making a floor lamp with a wooden lampshade Long and thin branches tied together into a bunch, attached to a stable support, are used to create a floor lamp The frame of an old lampshade can be decorated with beads to create a new lamp Ribbons and beads can be used as the main material for a new lampshade or as decoration Fabric lampshades - perfect option for a table lamp in the bedroom The lamp can be made from water pipes A lampshade for a floor lamp is easy to knit The original lamp is made from aluminum can lids

Pendant lamps

Ceiling lamps made from yarn are common, which is used to wrap balloons, and then the entire structure is covered with glue. For many, such a simple option is their first attempt at this type of needlework. Chandeliers made from driftwood, bottles or suspended structures from plastic pipes.

Photo gallery: DIY pendant lamps

A driftwood chandelier is a bright and stylish piece for the living room You can quickly and easily make beads beautiful chandelier Wood material used for making lamps must be varnished Decorate the kitchen or Vacation home You can use a bottle lamp Plastic spoons are used to make beautiful lamps in the shape of a pineapple, a ball, etc. Lamp made of metal graters - stylish and functional decor for the kitchen Remains of water pipes and connecting fasteners are an unusual material for a ceiling lamp

How to make a lamp

Paper - corrugated, colored, geographic Maps, cardboard, wallpaper, bags and other types - one of the best materials for crafts. A simple lamp made from paper butterflies can be made quickly and without special effort. To do this, you will need a frame from an old lampshade, a metal ring or just wire from which the base for the product is made. Then all that remains is to simply cut out the butterflies and attach them to the frame using silicone glue or, for example, hang them on a wire. It doesn't take long to make a table lamp from plastic pipes or spoons, although the projects are more complex than paper chandeliers.

You can cut paper butterflies for a homemade chandelier according to a template together with your children

Lamp made from paper bags using the origami technique: step-by-step instructions

This lamp can be made wall, table or hanging. To work you will need:

ready-made electrical base for the lamp - a wire with a socket and a switch, a plug (for a table lamp or floor lamp);
stand for the lampshade (you can take it from an old one or use improvised materials for this, for example, a thick branch);
paper bag with an interesting print - 2 pcs. (when gluing, they must be at least 0.5 m long);
LED lamp;
thick thread and needle.

Operating procedure:

Cut the bottom off the paper bags and remove the handles.
Glue the resulting pieces into one, fold in half and then into an accordion. You should get 16 stripes of the same width.
The prepared bags are folded into an accordion
Fold each strip diagonally. This part of the workpiece will subsequently be the top.
The paper blank must be bent accordingly in order to later make a lampshade out of it
On the opposite side, which remains flat, also bend each strip diagonally. This part is shorter in length.
All folds on bags must be symmetrical and even.
Carefully unfold the bags and bend the blank along the resulting folds to form a lampshade.
Using the folds on the paper, a three-dimensional figure is formed, reminiscent of a berry.
On top (where the folds are longer) sew the workpiece with a thick thread.
To keep the lampshade in shape, it is fastened with thread at the top
Then insert a socket with a wire inside the lampshade, screw in the LED lamp and hang the structure on the stand.
Since paper burns well, it is better to use LED lamps in the lamp

LED chandelier from socket-splitters

An ergonomic and unusual chandelier in the loft style can be made from socket-splitters for diode lamps. Ready design painted in any color suitable to the interior of the room. It is important to securely fasten all parts. To work you will need:

ceiling rosette - 1 pc.;
splitter cartridges - up to 12 pcs.;
lamps - up to 12 pcs.;
spray paint;
paper.

The shape of the chandelier can be any

Spread paper on the work surface and paint the workpiece on all sides with spray paint.

Wait until it is completely dry.

Paint the ceiling rosette only from the front side and dry it too. If necessary, reapply a coat of paint.

If you want to change something in the room, you can simply connect the fittings differently to get a new chandelier shape

Video: how to make a lamp with shades from cups

Anyone can decorate their home with a new handmade lamp. Just choose interesting idea and put in a little effort.

Reading time ≈ 8 minutes

Everyone dreams of decorating their home with stunning lamps, made with their own hands from scrap materials according to an individual, unique design. These original products can transform not only a separate room, but the entire apartment. To have an exclusive item in the form of a sconce or an unusually shaped lamp, you do not need to buy expensive materials. All you need here are available tools, your imagination and a little creativity. Let's consider the most best ideas and homemade decor options.

Original pendant lamps-mugs

Masterpieces from simple materials

Lampshades and other lighting fixtures can be made of almost any material that can change shape or be divided into several parts. It can be wood, plastic, metal, paper, glass and even individual household items. Old bottles, records, dishes, toys or musical instruments, but the main component is still the light bulb.

That is why it is important to ensure that the lamp does not heat up too much and is safe for others. Otherwise, everything depends on your imagination and capabilities.

Room lamp in textile lampshade on a marine theme

What criteria are taken into account when choosing a lamp model:

general room design;
interior design style;
room size and ceiling height;
level of illumination and number of window openings.

But the creation of a product cannot always be planned in advance. Sometimes the materials themselves, found at home or in the garage, can give rise to the idea of creating a real masterpiece, as in the photo.

Wall and table lamps from old utensils and equipment

Let's look at a few unusual options:

from tin cans - great idea for arranging a workplace, it can be placed both in the office and in the student’s room. If desired, the jar can be decorated with paint, threads and even a beautiful print;
from hangers - it is better to use wooden ones, sanding each one and adjusting it to the desired size. At the same time, you can create any shape, and also cover such a lampshade with paint;
from wood cuts - wood will always be relevant and fashionable for interior decoration. To create a unique designer item, the cut needs to be well processed, dried, coated with a protective solution and the top part of the old lamp installed. As a last resort, use a lampshade base from a store;
from glass bottles– time spent on work cannot be considered wasted. After all, the end result is such beauty;
from old drums or sports equipment - the products look very unusual and are suitable for decorating a teenager’s room, office or country house. Drum set and old skis - also perfect solution for your own restaurant or office, as in the photo;
from small bicycle parts - designers from Texas were the first to come up with this idea. The artists made balls from small parts of old bicycles;
pumpkin lampshades - cut into the skin beautiful patterns, the pumpkin itself is dried, and a light bulb is placed inside. This will become a real masterpiece and will delight the household for a long time;
from paper cupcake tins - by securing them in a circle around the main lamp, you can make a beautiful night light for a nursery or bedroom;
from a set of graters - kitchen utensils can be useful and sparkle beautifully above your head, creating a special charm in the interior, as in the photo;
A lace lamp is made from openwork napkins and knitted scarves. The fabric is covered adhesive composition for fixation;
in cutlery - if you have accumulated a lot of spoons, forks and knives, and it’s a shame to throw them away, create stunning compositions for decorating kitchen sconces and chandeliers. Cutlery can be fixed with wire, rope and glue;
hanging sconces in cups will come in handy on cozy evenings while drinking tea in the kitchen or summer room;
from a colander - this is an excellent option for any. It is better if the product is covered with enamel, but such a lamp can be painted in any bright color;
wire - this is the most simple idea for Hand-Made, because any beginner can cope with the production. All you need is wire in bright colors, a can of paint and a steel wire;
from veneer - the material can be woven into a round lampshade, and the parts can be fastened together adhesive solution. You can use the veneer left over from the renovation;
from rope - in a modern city, with the help of such a lamp you can create a home cozy atmosphere real province and village comfort;
made of branches - this is an extreme design, suitable for Eco, Country and Loft styles. The branches can be tied together with jute rope into almost any shape. Compositions are created different sizes, varnished or left unchanged;
made of large beads and stones - such a chic design will transform any interior. Beaded lampshades are an excellent decoration for any bedroom, living room or;
from an old wheel - you can even find a use for it by cleaning it from rust and covering it with paint of the desired shade. Light bulbs are placed around the perimeter in any order;
shade self made from old photographs can decorate a table lamp or floor lamp, as seen in the photo;
from can pull tabs - tin cans from soda, beer and just canned food are suitable for this. You will have to save rings, keys and reeds for some time in order to have enough to create a lampshade or lampshade.

All lamps or lamps made by hand from scrap materials can have different configurations. If desired, it is possible to make both a floor-standing, table-top and hanging model.

Spoon chandelier

Not always to create original interior you need to buy expensive designer furniture and accessories. You can make decor and other items yourself from simple remedies. Consider a master class on making an indoor chandelier from plastic spoons - the work can be completed in just 30 minutes.

Required materials and tools:

a large number of disposable plastic spoons;
empty plastic bottle;
glue;
chandelier socket;
scissors and knife.

All labels must be removed from the surface of a bottle or any other plastic container using a soap solution. Then blanks are made from spoons, and the handles are cut off. The parts are fixed with glue to the surface of the bottle; here it is important to maintain a certain order or a planned combination of rows and colors. Cover the container in a circle, making sure that there are no gaps or visible excess glue.

Plastic chandelier made of white spoons

Glowing ball of thread

This perfect solution for a nursery or bedroom in Shabby chic style. To create a delicate ball chandelier you will need to purchase:

glue;
thread or strand of any suitable shade;
balloon;
petrolatum;
needle;
lampshade.

First you need to prepare by inflating and tying the balloon, and then covering it with Vaseline. We make a hole in the tube of glue through which we will thread the threads and glue it to the surface of the ball. When the ball is completely covered with ropes and only small gaps remain, leave the product for a day to dry.

The next day, the ball is pierced with a needle so that it deflates or bursts. We trace the circumference of the lampshade with a felt-tip pen on the surface of the circle, then make a cut the right size. The hole is needed to insert the socket and connect the lamp. The cartridge is well fixed with glue and additional threads.

Paper lamp for bedroom

To make a beautiful table lamp made of thick paper in the Minimalist style, you will need:

lamp set or lantern;
adhesive solution;
putty;
dye;
thick cardboard to create a template;
scissors;
art tapes;
grinding block;
wooden weighting material;
construction knife or drill;
ruler.

Indoor lamp made of thick cardboard

First, you need to reprint the template or simply transfer it onto paper, with each triangular shape containing 6 pieces from each 6-gon.

Manufacturing technology:

If you get inspired, be sure to make a lamp yourself - the product can be made from any available materials. The video master class below shows how to make a designer lamp from wood using drawings and diagrams.

Decorating the house yourself is a favorite pastime of many housewives; this article reveals how to make a lamp with your own hands. You can revive the interior of a living room, bedroom or hallway using improvised means, just by changing the shade of a chandelier, floor lamp or table lamp. Do-it-yourself lamp shades can be used not only in residential interior, but also in the halls of cafes, pubs, pizzerias.

Selection of materials and lamps for the lamp

Products made for children's rooms must be made from natural, non-toxic materials and painted with environmentally friendly paints.

When manufacturing, you should also remember fire safety, so lampshades made of flammable materials made from paper, plastic, feathers or threads should only be used with lamps that have a low heating temperature.

You need to use LED or fluorescent lamps. They have a number of advantages:

long service life;
minimal heating of the base from the glass part;
the light has three shades: warm, cold, neutral.

In addition, such lamps are also called energy-saving; their only drawback is their high cost.

It is also advisable to have a specialist connect the wire to the socket. You should not try to perform this operation yourself, as this may lead to undesirable consequences. It is more convenient to decorate an existing lamp frame or make it from durable and not very heavy materials.

To create lamps they use following materials: scissors, mounting knife, fishing line, wire, pliers, hot gun, in some cases it can be replaced with super glue. They should be used by an adult; it is unacceptable to involve a child in gluing. Since in one case he will get a burn, and in another he may glue his fingers together or stick to the parts of the future product.

What can a lampshade be made from?

Many craftsmen make lamps from completely unnecessary materials:

from plastic or glass bottles;
newspapers, thin or colored paper;
artificial or natural threads;
dried branches of unusual shape;
disposable spoons;
old disks.

Plastic lamp

You can easily make a homemade chandelier from plastic containers of different sizes.

For the base you need to take a 5 liter bottle. The bottom is cut off from it. Then circles with a diameter of 1.5 cm are drawn on the surface. They need to be cut out with a mounting knife or small scissors.
The bottom of the bottles for decoration is cut off and the entire surface is cut with scissors into strips 0.5 - 1 cm wide, then the workpiece is heated over a lit burner. When exposed to heat, the stripes will take on a chaotic appearance.
Then the blanks are inserted into a 5-liter container with holes, and with inside The lids are screwed on. Then a wire is threaded through the large neck and the lampshade is installed. For such a lampshade you need to use an energy-saving lamp.
In some interiors you can find a fancy lamp made on the basis of an ordinary hanger or straw hat. In general, nothing can limit the scope of imagination of both home craftsmen and professional designers.

Glass bottle lampshade

Very interesting option homemade chandelier is made from glass bottles. They are used to decorate the halls of catering establishments. Also this a good option for the kitchen in a residential building or apartment. This can be a lampshade consisting of one or several bottles, the bottom of which is cut off. You can do this yourself, but it is better to use the services of a workshop where they cut glass and mirrors.

How to use thread

For a lampshade made of threads or ribbons you will need: a ready-made frame made of strong wire, threads different color, scissors, glue.

The frame consists of two rings connected to each other by metal pieces. You can make it yourself from strong wire.
One color or several shades of thread is required.
A thread is secured to the bottom, then it needs to be pulled through the top ring, lowered down and thrown through the bottom ring. You need to make sure that the thread is taut and the turns fit snugly against each other. As soon as the thread runs out, you need to attach the next piece to the bottom ring.
Carefully trim the remaining threads and glue them on the back side.

Spoons for lamp

You can make a multi-tiered, colored lamp from ordinary disposable spoons.

It is necessary to make a frame from wire; for a round small lamp you need to make three circles with a diameter of 12, 18, 26 cm. Then the circles are fastened together using fishing line. The largest diameter will be at the top; there should be the same distance between them.
In the spoons you need to make a small hole with a thick needle at the top of the handle.
Spoons are painted with acrylic paints in three colors, for example, yellow, orange, red.
Assembling a homemade chandelier: cut the fishing line to a length equal to the distance between the circles. A spoon is tied to one end of the fishing line, and the other to the frame. You need to tie yellow spoons to the bottom circle of small diameter, orange to the middle circle, and red to the top circle.

Lightweight and elegant lampshade

For a paper lampshade, paper or thin cardboard is suitable. Such a lampshade can be either rectangular or square. First you need to think about the size of the lampshade than bigger room, the wider the design can be. In a small nursery or hallway, a lampshade with a diameter of 30–35 centimeters will look good.

The frame can be made of wire; it will consist of an upper and lower part; consider making a lampshade in the shape of a cylinder.

You need to make two circles of wire of the required diameter. They are connected to each other using a fishing line, the distance between the bottom and top frame– 12 – 15 cm, the hoops are fastened with fishing line in three or four places. The larger the diameter of the base, the more connecting elements need to be made.
You can draw circles on a piece of paper different diameters, figurines of cartoon characters. Outline drawings can be taken from the Internet and printed, then redrawn using carbon paper. A special ruler is suitable for drawing circles, or you can outline lids or buttons of different diameters. Some designs are cut out completely with a stationery knife, others are cut along the contour.
The paper is tried on the base and glued with an overlap. Then glued to the wire, it can also be secured using thin wire. To do this, first make a hole in the paper with a thick needle or awl, then thread the wire and carefully tie it to the frame. It is advisable to glue thin paper, as it can easily be damaged.

Exclusive lampshade made of metal basins

Cans made of any metal are used; an interesting option would be made from copper or aluminum containers. An old, used basin will also work. If there is a through hole in it, it needs to be welded or sealed, for example, epoxy resin.
The inner surface must be painted light color so that the light reflects as much as possible from it.
The outer surface can be painted dark, saturated color harmonizing with the interior.
A fringe about 5 centimeters long is glued to the bottom of the headband with hot glue. In the central part of the basin you need to make a hole for the wire. It can be drilled with a drill or pierced with a nail.

Such a lampshade can be decorated with a mosaic of CDs. To do this, the discs are cut into small fragments with sharp scissors, which are glued to the outer surface of the pelvis. You can glue only the bottom outline and paint the rest. Or decorate the entire surface of the lampshade with such a mosaic. The more convex the surface, the smaller the disc fragments should be.

Natural materials

An original lamp can be made from a dry branch of an unusual shape. It needs to be cleared of bark and covered with stain, then, if desired, treated with clear varnish. The branch must be attached to the hook on the ceiling using regular fishing line. Then I wind the wire with the lamp onto the branch several times. A branch entwined with several wires looks beautiful.

You can make a lamp from plastic hangers. Described in detail in the video:

Lamps for different rooms

DIY bottle chandeliers are more suitable for the kitchen. Structures made of glass or plastic will be easy to clean from dust and wash if necessary. For the kitchen, hallway or living room, a lamp made of natural wood.

For a children's room, a lamp made of painted plastic bottles, a floor lamp made of bright threads, or paper composition. The last option cannot be called durable, but this is the option that children will like. Girls will like a lampshade with butterflies and plant elements; boys will like designs with cars, superheroes or bright plastic lampshades.

Some cafes and pubs use original lamps made from bottles to decorate the hall. These could be beer bottles. They can serve as a lampshade for light bulbs, or be an interesting frame for a lamp.

Ideas for homemade lamps by location

You can give a new look to a floor lamp with your own hands. You can decorate the lampshade with fabric, threads, paper with cut-out designs, and you also don’t need to ignore the base and leg of the lamp. They can be painted with acrylic paints, glazed, and decorated with beads. The decor of the lower part of the floor lamp should echo the elements in the upper part. The easiest option is to decorate the lampshade solid color lace or guipure.

Decorating lamps

Bottom part A lampshade made of threads can be decorated with pom-poms of the same size hanging on a thread. They are glued to the inside of the frame with glue. Pompoms can hang at the same or different heights. They can be made in one color or combined several shades.

To decorate paper lamps, you can use lace, thick tulle, and beads of different sizes. You can decorate glass jars or bottles with glass pebbles, which can be purchased at hardware stores. You can also use buttons of different sizes and colors. Small buttons can even be glued to PVA.

On new year holidays It is customary to decorate the Christmas tree, but you can also decorate the shades of lamps and floor lamps. Here you can use regular rain, hand-carved snowflakes, Christmas tree figurines, decorative balls and a regular garland. If in wall or floor lamp If an energy-saving lamp is installed, its lampshade can be decorated with paper snowflakes.

Wall sconces installed in living rooms, bedrooms, children's rooms. After repairs, you can use old sconces only by changing them appearance. You can paint the body of the lamp in a light color, and apply bronze or silver paint on top with a hard bristle brush to create a patina effect. If the lampshade is glass, the desired pattern is applied to its surface using a glass stencil. Here you can use contour paints (they are used to create stained glass) or aerosol paints.

Economical lighting lamps are already found in almost every home. We offer you to consider how to make an LED lamp with your own hands, what materials will be required for this, as well as tips on what criteria should be used to select them.

Step-by-step development of an LED lamp

Initially, we are faced with the task of checking the performance of the LEDs and measuring the supply voltage of the network. When setting of this device to prevent damage electric shock We suggest using a 220/220 V isolation transformer. This will also ensure safer measurements when setting up our future LED lamp.

Please note that if any elements of the circuit are connected incorrectly, an explosion is possible, so strictly follow the instructions given below.

Most often, the problem of improper assembly lies precisely in poor-quality soldering of components.

When making calculations to measure the voltage drop in the current consumption of LEDs, you need to use a universal measuring multimeter. Basically, such homemade LED lamps are used at a voltage of 12 V, but our design will be designed for a mains voltage of 220 V AC.

Video: LED lamp at home

High light output is achieved with diodes at a current of 20-25 mA. But cheap LEDs can produce an unpleasant bluish glow, which is also very harmful to the eyes, so we recommend diluting your homemade LED lamp with a small amount of red LEDs. For 10 cheap white ones, 4 red LEDs will be enough.

The circuit is quite simple and is designed to power LEDs directly from the network, without an additional power supply. The only drawback of such a circuit is that all its components are not isolated from the mains supply and the LED lamp will not provide protection against possible electric shock. So be careful when assembling and installing this light. Although in the future the circuit can be upgraded and isolated from the network.

Simplified lamp diagram

When turned on, a 100 ohm resistor protects the circuit from voltage surges; if it is not there, you need to use a higher power diode bridge rectifier.
The 400 nF capacitor limits the current required for the LEDs to glow normally. If necessary, you can add more LEDs if their total current consumption does not exceed the limit set by the capacitor.
Make sure that the capacitor used is designed for an operating voltage of at least 350 V, it should be one and a half times the mains voltage.
A 10uF capacitor is needed to provide a stable, flicker-free light source. Its rated voltage should be twice that measured across all LEDs connected in series during operation.

In the photo you see a burnt out lamp, which will soon be disassembled for a DIY LED lamp.

We disassemble the lamp, but very carefully so as not to damage the base, then clean it and degrease it with alcohol or acetone. We pay special attention to the hole. We clean it of excess solder and process it again. This is necessary for high-quality soldering of components in the base.

Photo: lamp socket

Photo: resistors and transistor

Now we need to solder a tiny rectifier, we use a regular soldering iron for these purposes and have already prepared a diode bridge in advance and process the surface, working very carefully so as not to damage the previously installed parts.

Photo: soldering the rectifier

As an insulating layer, it is fashionable to use the glue of a simple hot-melt assembly gun. A PVC tube is also suitable, but it is advisable to use a material specially designed for this purpose, filling all the space between the parts and at the same time fixing them. We have a ready-made basis for the future lamp.

Photo: glue and cartridge

After these manipulations, we proceed to the most interesting part: installing LEDs. We use a special circuit board as a basis; it can be bought at any electronic components store or even taken from some old and unnecessary equipment, having first cleared the board of unnecessary parts.

Photo: LEDs on the board

It is very important to check each of our boards for functionality, because otherwise all the work is in vain. We pay special attention to the contacts of the LEDs; if necessary, we further clean and narrow them.

Now we are assembling the constructor, we need to solder all the boards, we have four of them, to the capacitor. After this operation, we again insulate everything with glue and check the connections of the diodes to each other. We place the boards at the same distance from each other so that the light spreads evenly.

LED connection

We also solder a 10 uF capacitor without additional wires; this is a good soldering experience for future electricians.

Finished mini lamp

Resistor and lamp

All is ready. We recommend covering our lamp with a lampshade, because... LEDs emit extremely bright light that is very hard on the eyes. If you place our homemade lamp in a “cut” made of paper, for example, or fabric, you will get a very soft light, a romantic night light or a sconce for the nursery. By replacing the soft lampshade with a standard glass one, we get a fairly bright glow that does not irritate the eyes. This is good and very nice option for home or cottage.

If you want to power the lamp using batteries or from USB, you need to exclude the 400 nF capacitor and rectifier from the circuit, connecting the circuit directly to the source direct current voltage 5-12 V.

This is a good device for illuminating an aquarium, but you need to choose a special waterproof lamp; you can find it by visiting any store of electromechanical devices; these exist in any city, be it Chelyabinsk or Moscow.

Photo: lamp in action

Lamp for the office

You can make a creative wall hanging, table lamp or a floor lamp for a work office made of several dozen LEDs. But for this, the flow of light will be insufficient for reading; here you need a sufficient level of illumination of the workplace.

First you need to determine the number of LEDs and rated power.

After that, find out the load capacity of the rectifying diode bridge and capacitor. We connect a group of LEDs to the negative contact of the diode bridge. We connect all the LEDs as shown in the figure.

Diagram: connecting lamps

Solder all 60 LEDs together. If you need to connect additional LEDs, just continue to solder them sequentially, plus to minus. Use wires to connect the negative of one group of LEDs to the next until the entire assembly process is complete. Now add a diode bridge. Connect it as shown in the picture below. Connect the positive terminal to the positive wire of the first group of LEDs, connect the negative terminal to the common wire of the last LED in the group.

Short LED wires

Next, you need to prepare the base of the old light bulb by cutting off the wires from the board and soldering them to the AC inputs on the diode bridge, marked with the ~ sign. you can use plastic fastenings, screws and nuts for connecting two boards together if all diodes are placed on separate boards. Don't forget to fill the boards with glue, insulating them from short circuit. This is a fairly powerful network LED lamp that will last up to 100,000 hours of continuous operation.

Adding a capacitor

If you increase the supply voltage to the LEDs in order to make the light brighter, the LEDs will begin to heat up, which significantly reduces their durability. In order to avoid this, you need to connect a 10 W recessed or table lamp with an additional capacitor. Simply connect one side of the base to the negative output of the bridge rectifier and the positive side, through an additional capacitor, to the positive output of the rectifier. You can use 40 LEDs instead of the suggested 60, thereby increasing the overall brightness of the lamp.

Video: how to make an LED lamp with your own hands

If desired, a similar lamp can be made using a powerful LED, but then you will need capacitors of a different value.

As you can see, assembling or repairing a conventional DIY LED lamp is not particularly difficult. And it won't take much time and effort. This lamp is suitable and how country option, for example, for a greenhouse, its light is absolutely harmless to plants.

Every person wants to decorate their home decorative items. This brings something lively and completely unconventional to the interior of the house. This transformation also affects lighting, lighting fixtures made by yourself - this is an excellent option to transform your life. This article will tell you how to make a lamp with your own hands.

There are countless ideas, this applies to both the design itself and its appearance. This could be a floor lamp or a chandelier shade, or even a table lamp.

Materials

It is worth paying attention to safety precautions and using non-flammable materials. You should not use paper, plastic and similar materials that have a fairly low combustion temperature.

As for the lamps themselves, it is worth using LED lamps, as they have many advantages, such as a long service life and do not overheat. It also has several shades and, of course, saves energy.

Ideas for lamps

More recently, it has become fashionable to create interesting lighting fixtures from completely useless materials; a striking example of this are lamps made from empty glass bottles.

There are countless ideas, however, if you have a desire to do something similar, but the idea is not ripe, then you can look on the Internet for photos of lamps made by yourself.

The simplest and effective way to make original lighting, it will be to create a lamp from an ordinary glass jar with screw cap.

Place the jar in hot water, in which dilute detergent, in order to clean it from labels and dirt. The next thing you need to do is drill a hole for the base. Now you need to insert the base into the cover and secure it.

The main thing is not to forget to solder the wire with a 220V plug, otherwise you will not have a power source. Finally, screw in the light bulb and screw on the lid of the jar. Done, now you have a very simple lighting device that stands out from the general concept of classic everyday life.

By the way, you can decorate the jar with painted engravings or a knitted thread pattern. This is a very original and beautiful solution. For example, you can make a lamp with a knitted pattern in the shape of a flower.

Wooden lamps

This type of lighting is completely different from simple designs. After all, a lamp made of wooden driftwood will look truly extraordinary. However, the work requires more time and care when handling tools and materials.

But at the same time, almost anyone can do such work. And wood can be found in forest plantations. The technology is quite simple; you need to clean the wood and sand it with sandpaper.

Now drill holes for the wiring in the necessary places, but this must be done where the wood piece will be installed closest to the ceiling. For greater effect, you can make small grooves in the wood where the wiring will be installed.

After laying the wiring, part of the wood with the wire can be puttied, and after waiting for the putty to dry completely, sand these places and open the entire driftwood with colorless varnish.

All that remains is to install this lamp. Of course, after the work done, the skill and understanding of this will appear, and now, with a high degree of probability, you will be able to repair the lamp yourself.

Lamp made of planks

Not everyone is satisfied with a spotlight, but you can assemble structures from scrap materials. When working with wood, in particular with boards, there are often scraps left over, and even they can be used. You can make an excellent decorative lamp from them.

The best thing about this design is that you don't need to use nails. To create such lighting fixture, you need 17 planks that will be the same size.

Now, each plank needs to be shaped into a wedge and a base is made where the cartridge needs to be installed. The next thing, using a drill, we will make a pair of holes in the base for each plank and, accordingly, in the blanks.

Let's take wooden pins and fasten the structure. This lamp is very easy to make and looks very impressive.

If these ideas do not suit you, then on the Internet you can easily find master classes on making a lamp in video format.