Simple crafts from plastic bottles with your own hands. Crafts from plastic bottles - ideas for summer cottages, gardens and gardens

From an ordinary plastic bottle, you can form products that will be useful in playing with children, in the household, and in the interior of the house. From unpretentious material, you can prepare crafts for kindergarten. Children can independently cope with elementary manufacturing schemes with little or no help from adults. In addition to plastic bottles, you may need a glue gun, paints and scissors.

To make any craft from a plastic bottle, you need to prepare the necessary tools and materials:

plastic bottles - the main material;
scissors, blade and clerical knife - used for cutting;
acrylic paints - useful for decorative finishes;
brushes of various thicknesses for drawing;
candle for burning sharp cuts;
glue gun for joining parts;
construction stapler to attach other elements to the base.

Depending on the complexity and decorative finishes, additional materials are selected.

Do-it-yourself ottoman from plastic bottles

Craft from a plastic bottle for home improvement is the best option for price and quality. Diverse furniture can be made from raw materials, in particular, an ottoman.

You will need the following tools and materials:

38 plastic bottles of the same size and shape;
a skein of wide stationery tape;
plywood sheet;
jigsaw, scissors, clerical knife;
roll synthetic winterizer;
construction stapler;
measuring tape and pencil;
thick fabric for upholstery.

Craft from plastic bottles with your own hands: step-by-step production of a round ottoman

Algorithm for creating an ottoman:

Arrange the bottles so that they resemble a honeycomb in shape. In the 1st row there are 4 elements; in the 2nd - 5; in the 3rd - 6; in the next - 7. The remaining 3 rows are set according to the principle of the 1st, 2nd and 3rd.
Wrap tightly with stationery tape. You need to make several layers and wind from the top of the bottles to the very bottom in a spiral - you will get the basis of the future ottoman.
Measure the diameter of the resulting honeycomb. On plywood, draw a sketch of a circle with the resulting diameter. Make 2 such details. It is advisable to try on circles so that they correspond to the parameters of the base figure.

Craft from plastic bottles with your own hands: step-by-step production of a square ottoman

Using a construction stapler, nail plywood circles on top and bottom of the base of the pouffe.
Wrap the sides with synthetic winterizer. Cover the circles with soft material too. Fix the soft base with a construction stapler.
Take measurements from the resulting workpiece and make textile patterns. Sew a cover, which is then put on the body of the pouffe.

Furniture of this type can be made in a few hours, it looks presentable, the costs are minimal.

Flowers from plastic bottles

There are many options for creating flowers from plastic bottles.

The easiest way to create a three-dimensional flower:

Cut off the bottom of the bottle so that the height of the resulting object corresponds to 5-6 cm.
Divide the circle into 5 equal parts with a marker. The markup is made so that each part includes the bulge of the bottom. Cut through the plastic to the very bottom of the bottom at each of the marks.
To form attractive petals, you need to round each resulting strip.
Treat the edges of the cuts by dusting over the flame of a candle.

Make a hole in the center of the bottom using a heated nail, awl or soldering iron. Pass a thick wire through it, which will become the stem of a plastic flower.

Plastic bottle toys

A craft made from a plastic bottle can become a strong, interesting and budget toy for a child of almost any age.

Several toy options:

apple box

Octopus

piggy bank

Cut off the bottoms of two identical bottles. The height of each element must be the same and be more than 6 cm.

Make a hole in the center of one of the parts with a hot nail.

Cut a strip from the canvas of a green bottle, twist it into a tube - you get a stalk. Cut out a leaf from the same strip.

Glue a leaf to the handle, thread the tube through the hole in the bottom. Everything is fixed with a glue gun.

If you insert one bottom into another, you get a full-fledged apple in which you can store little things.

Cut the bottle in half. Measure a distance of 5-8 cm from the cut. Divide the circle into parts, each should be 1-2 cm thick.

When cutting plastic along the marks, strips are obtained. Twist the elements with a scissor blade.

Make eyes out of lids. Draw the pupils with a marker, and then attach the blanks with a glue gun to the body of the octopus.

Make a hole in the bottom, thread a thread through it. You get a toy-analogue of "Yo-Yo".

Pick up a bottle with a wide bottom. Use a marker to draw the nostrils on the lid, and the eyes on the bottle itself.

Cut a narrow rectangular hole in the base of the body.

From the covers, make stable legs-stands by attaching the elements with a glue gun.

Cut out ears from thick cardboard and glue to the base.

You can make any toy out of bottles by creating a product layout:

Zhukov;
fruit;
vegetables;
transport;
dolls;
figurines.

house made of plastic bottles

From plastic bottles, you can create a house that will be a refuge for kids in the yard, the basis of a sandbox.

You need to make preparations:

more than 500 tons of bottles of the same volume and shape;
timber and plywood;
nails, wire, construction stapler;
sharp knife, nails;
4 hemp;
tools for making measurements and markings.

Algorithm of "construction":

From a bar to make the body of the future house. Wooden bases are knocked down in such a way that frames are formed - the foundations of future walls. Knock down 2 more frames, which will become the roof slopes. Install the body on the hemp-legs. Lay the plywood underneath.
Determine the container diameter. Mark the upper and lower beams in accordance with the received parameter. Drive a nail into the center of each strip.
From each bottle, cut off the neck so as to remove the narrowing of the element. In the center of each bottom with a red-hot awl hole.
String so many blanks on a piece of wire so that they form a full-fledged strip from the upper beam to the lower body. In the process of forming a strip of the wall, you need to make sure that all parts sit tightly relative to each other.
Fasten one end of the wire to a nail driven into the top beam. Stretch the metal base like a string and fasten it to the nail of the lower wooden base. Make as many stripes to make a wall.
To strengthen the walls, you can knock the bottles together with a construction stapler.

The roof is made according to the same principle. The ceiling can also be made flat using the wall manufacturing algorithm. By changing the direction of the "strings" on which the containers are strung, windows can be made.

plastic bottle doll

A plastic bottle craft can be a fully functional doll that you can play with.

List of tools and materials:

plain fabric in pastel color;
synthetic winterizer;
2 buttons;
Knitting;
printed fabric;
needle with thread;
marker;
bottle;
glue gun.

Manufacturing technique:

Head shaping. Cut out a circle from the fabric. Sew along the edge with a small line seam. Slightly pull the workpiece, fill it with padding polyester. Fully tighten the thread and fix the seam. Sew on buttons for eyes, draw a nose and lips with a marker.
Neck making. From the same textile cut a wide strip. On one side, sew a cut, slightly tightening the textile. Attach the element to the seam of the head and sew the pattern. Get a kind of skirt at the bottom of the head.
Hairstyle creation. Cut the knitting thread into equal pieces. Pass each part through a needle. Make a stitch on the "head" of the doll. Pull out the needle and tie the thread into 2 knots. It turns out immediately 2 hairs. After repeating the manipulations with scissors, trim the hair.

Hand making. Cut 2 strips from pastel fabric. Sew each strip to form a tube. Fill the space with padding polyester, sew up the edges.
Torso. Cut off the bottom of the bottle. Treat the area near the neck with a glue gun. Set the head on top, and lay the skirt-neck on the adhesive part. Using a glue gun, attach the hands to the base of the container.
Take measurements from the container and sew a sundress or dress for the doll. Put clothes on the doll. You can fix the element with glue.

You can make a more complex doll model using other auxiliary materials.

Do-it-yourself bird from plastic bottles

It is easy to make a parrot or an owl out of plastic containers, since the silhouette and manufacturing principle are identical.

Training:

2 identical containers;
several multi-colored bottles;
scissors or stationery knife;
glue gun;
2 lids and marker.

Manufacturing algorithm:

Make a base from identical containers. Cut out the middle part from one container and connect the cuts to each other, cut off the bottom from the second to expand. Using a glue gun, connect the bottoms together. Get a kind of hourglass.
Cut out the middle parts from the rest of the containers. With a marker, draw the number of ovals that will fit on the canvas.
use a glue gun to attach the ovals to the base. It is necessary to make sure that each next element breaks 1/3 of the lower one. It turns out feathers superimposed in layers.

Ovals are stacked in a certain pattern. When making an owl, eye circles are first formed, then the rest of the head is filled. In a parrot, feathers are distributed evenly throughout the body - from top to bottom. The lids make eyes.

Flowerbed from a plastic bottle

A neat, compact and at the same time roomy is a two-tiered flower bed made of plastic bottles.

Manufacturing technique:

Prepare a place for a flower bed, decide on the parameters and shape of the product.
Dig a small groove, which will become the outline of the flower bed fence.
Fill the containers with sand or earth, tighten the lids.
Bury the filled container into the groove. Immerse containers in the ground a little more than half. Bury neck down.
Having formed the lower tier of the flower bed, you need to fill the inside with earth. To prevent the bottles from spreading under the action of the soil, you can tighten them with wire. Tamp the earth.
Thanks to measurements and calculations, determine the center of the flower bed and make another one of the same fence, but smaller. Cover with earth and tamp.

The flower bed is ready for planting. Additionally, you can strengthen the structure with natural stone, brick, tile.

Birdhouse from a plastic bottle

For the manufacture of a birdhouse, it is better to take a 5-liter plastic bottle. Additionally, you need to prepare scissors and a glue gun.

Manufacturing features:

Cut off the bottom.
Remove half of the base of the bottle.
At the base of the neck (parallel to it), with the help of folds, form the silhouette of a house with a gable roof. You can bend plastic using scissors.
In accordance with the layout, bend the rest of the bottle.
Attach the layout to the cut bottom and cut out the shape from it. Glue to the house with a glue gun.

You will get a full-fledged house, the “entrance” to which is carried out through a wide neck.

Bird feeder from a plastic bottle

A plastic bottle craft can be a bird feeder.

Simple production option:

Pick up a bottle in the form of a barrel with a volume of 1.5-2 liters.
Cut out large arched windows at the base of the container. It is better to make 4 openings.
In the neck area, burn 4 holes at the same level. Thread a wire or thread - you get fasteners.

Grain is poured into the bottom, through the windows the birds will be able to get inside the feeder.

Palm tree from plastic bottles

To create a plastic palm tree, you need to collect more than 100 brown and 100 green bottles, prepare a construction stapler.

Manufacturing technique:

Cut off the bottom of each brown container. From the canvas of the container, form 5 rounded petals 5-7 cm long.
Sticking the neck of the bottle into the bottle with the petals up, fix each element with a construction stapler.
The neck and bottom are cut off from green containers. Bend the cylinder in half along the heights. Cut the element along the fold. Using scissors, make a terry along the long sides of the rectangle, cutting the edges into thin strips.
Place the green part on half of the other and fix with a stapler. Leaves are obtained.

At the end, the crown and trunk of the palm tree are assembled. You need to connect the parts tightly - it is advisable to use a wire. To make the barrel stand, you need to thread the workpiece with a metal pin.

Crafts from plastic bottles for preschoolers

A child of preschool age can make a toy or craft out of plastic bottles, which is important for all kinds of competitions in kindergarten.

It is worth choosing simple options and schemes of work so that the child can do everything at once, help from adults is minimized.

chamomile

Pick up containers from yogurt or milk. It is desirable that the lid has an orange color, and the container itself is white. Cut the bottle in half. Divide the base of the top of the bottle into 8-10 equal parts.

Cut into strips up to the neck. Round the edges and twist slightly with a scissors blade. Make a bend of each petal to the bottom. Screw on the cover.

Make a hole in the center of the twist by burning the base with a hot nail. Thread the wire - get a stem. Cut leaves from green plastic and glue them to the metal base with glue.

Penguin

Take 2 identical curly bottles. Cut one in half - leave the part with the bottom. From the second cut off the greater half, leaving only the lower part. Connect the blanks, fastening them with glue.

Paint over the form with black paint, the bottom with any other. With white paint, paint the base for the front. Form a muzzle. Glue a pom-pom from threads to the colored bottom. At the transition point, tie a ribbon that will play the role of a scarf.

Crocodile

2 green containers will come in handy. From the first cut off only the bottom and the hard part of the neck. Glue the edges of the smaller cut. From the second container, cut off the dense part of the bottom and top. At the point of narrowing, cut off half the bottle along.

Cut out 20 triangles from white paper. Make eyes out of colored paper, fix on the base. Glue the elements along the cut. Connect the bottles together. At the bottom of the form, glue 4 covers - these are paws.

bees

Paint over a small bottle with yellow, form black stripes along the entire “body” of the bee. Glue decorative eyes on the lid. You can draw with a marker. Cut an oval of medium size (wings) from a transparent or brown bottle.

Attach the manufactured parts to the base of the container. From narrow strips cut from the same container as the wings, make paws. Make a hole between the wings through which you can thread a thread - such a detail will allow you to hang an insect.

butterflies

Cut out the soft part from the plastic container, forming a canvas in the form of a rectangle. In accordance with the size of the base, choose a butterfly stencil. Apply a plastic base to the stencil, fix the components at 4 points with clothespins or clerical clips. Circle the contours with a marker, transferring the drawing to the plastic.

Lay the sketch on the board and cut out the shape with a clerical knife along the contour. Additionally, you can cut out some parts of the wing pattern. Nail polish can be used to paint the product along the marked lines. To add shine, you can use sequins, beads and rhinestones.

hedgehogs

Prepare 20-25 brown plastic containers. A transparent base is also suitable, which will then have to be painted over. Cut all pieces in half. Make a fringe by cutting strips to a tight place in the neck area.

Assembly is in progress - insert the bottles into each other. On the first container, draw the eyes of the animal. The cork represents the nose of the animal. On the "needles" you can put an apple made from bottles.

Helicopter

Pick up a table tennis ball and a container, the diameter of which will be the same as that of a sports equipment. Additionally, you will need cocktail straws, glue, scissors, and a safety pin.

Procedure:

Cut off the bottom of the container, leaving the neck twisted with a lid. It is enough to use a part with a length of 5-8 cm.
Make a cross out of the straws and fasten it with a safety pin. Attach to bottle cut.
Cut off a strip from the container along the circumference, divide in half.
Glue a piece of straw to a narrow strip along the edges. Use the part of the device in which there is a fold.
Glue the part on the bottom of the helicopter body - on the other side relative to the blades.
Insert a tennis ball into the cut hole of the container.

Glue the tail on the lid, which is made from cocktail straws. The model of this part of the helicopter can be made on the model of a real aircraft.

Matryoshka

Matryoshka is made using two techniques - working with plastic containers and papier-mâché. Choose the maximum curly capacity. Glue pieces of white paper on the surface that are dipped in PVA glue.

Cut off the hard throat. Close the hole in the same way as the base of the bottle. When the base is dry, smooth the surface with a damp brush. Paint the blank according to the sketch of the nesting doll. You can use gouache or acrylic paints for this purpose.

fly agaric

Prepare 2 containers - with a capacity of 2 liters and 0.5 liters. Cut off the bottom from the larger one, paint over with red paint. Make white dots. Treat a smaller container with white paint. Cut a rectangle out of paper, form a fringe on one side.

Glue to the middle of the white bottle. Fix the "cap" of the fly agaric on the white leg. You can make an additional fly agaric smaller and glue it to a larger element.

Household supplies from plastic bottles

From a plastic bottle, you can make not only jewelry or children's toys, but also functional products that are relevant in everyday life.

Item options:

Vases for indoor and garden flowers. Cut the container in half, give the original shape to the base and color it.

Country washbasin. Cut off the bottom. Fix the container upside down. With a slight loosening of the lid, water begins to pour out.
From 10 identical containers you can make a broom for cleaning the street. Cut off the bottom pieces. Fold each element in half lengthwise and make a fringe. Thread the elements by connecting them with wire.

Containers cut in half can be ideal caps for seedlings in the garden. If you remove the covers, then the cover will be additionally ventilated.
If you cut off 1/3 of the top of the bottle, you get a wonderful container for storing pencils, crayons and other small things.

Plastic containers can become the basis for weaving diverse baskets that can be used on the farm.
If there is a zipper between the two parts of the cut container, then you get an original organizer for storing cotton wool, bandages.
Cut off the bottoms from several containers, string them through the center of the part element onto a metal rod. Distribute the bowls evenly along the rod. Get a jewelry stand.

Cut the bottle in half. Cut out a square at the base. Such a device will become a pocket for the phone, which is put on the base of the charger, and the phone fits into the bowl.

You can decorate the craft decoratively by using paints, rhinestones, beads, glass stones, beads, ribbons. Elements can be attached to a plastic bottle using a construction stapler or glue gun.

Article formatting: Natalie Podolskaya

Video about plastic crafts

Craft from a plastic bottle with your own hands - video instructions for making:

That only skillful hands do not make from unnecessary (junk) items. Crafts from bottles with their own hands are made for arranging summer cottages, playgrounds. And they look very attractive and original. Plastic is the cheapest and most affordable and very flexible material. From it you can create figures of animals, flowers, dolls, children's transport, borders. Some craftsmen use them in the construction of arbors, fences, greenhouses, garden furniture and even boats.

Features of plastic as a material

Many people throw away plastic containers, considering them garbage, but this is a unique material for crafts that will certainly find application in the household. Its features as a material for creativity are that:

For the manufacture of crafts and work, you will not need any complex tools or devices, except for those that every good owner has in the house: scissors, sharp knives, candles, glue, stapler, drills, glue gun and so on.
Not only the bottle itself will fit in the work. From the covers you can create colorful panels, paths, decorate old furniture with them.
Thanks to the flexibility of the fluorescent bottle, even flexible structures can be created both indoors and outdoors.
Crafts can have different shapes and sizes, so both very small bottles and large bottles will come in handy.
Plastic is considered a safe material, so you can create crafts from it for playing at home or in kindergarten.

What bottles can be made for kindergarten or kindergarten

Creating characters and all sorts of figurines for children is a special area of amateur creativity. It is advisable to do them together with them. So it is easier to accustom them to perseverance, to teach attentiveness, concentration, to develop imagination. Consider, using the example of master classes, how to create simple figurines and fairy-tale characters for children.

chamomile

There are several options for making this delicate flower.

Option 1

White bottles are required for work. They usually sell their milk and should be picked up a little. In extreme cases, you can use transparent, but then repaint it in white. For each chamomile we need 3 bottles. All of them must have the same neck diameter, otherwise we will not be able to put together the magnificent parts.

We cut off the upper part (neck with a lid), just below the place of expansion. We do this with only two bottles, we leave one. It is desirable that the lid is yellow.

Cut out about 8 petals on each neck. Only so that they hold on, and do not fall apart. Bend them one by one in the opposite direction.

Let's start collecting the flower: we put on one of the blanks on top of the one that remained uncut.

Then the second in the same way.

We unfold and bend the petals so that the chamomile looks natural and lush.

We fix all three layers with a lid, we try to make it tighter.

Such flowers can be left as is, or you can paint them in different shades after assembly. They can be planted on a wire stem or attached to a fence.

Option 2

This daisy is more complex in design, but it also looks more natural and beautiful.

We cut circles from the cylinder of the bottle (about 8 cm in diameter, more if you want to create a large chamomile). Each will require three mugs

Each circle is subsequently cut into 16 strips and we form flower petals from them.

In the center with an awl, hot on fire, we make a hole.

A little later, when we collect the workpiece, you need to hold it a little over the fire. So the petals wrap themselves, creating the correct shape of a camomile.

We cut out the core of the flower from the yellow cover, pierce it and fasten it with wire with the inflorescence.

We make a sepal from a green bottle, also melt it a little over the flame.

We first attach the sepals to the stem, then three blanks of petals, the core and bend it with pliers so that the chamomile does not fall apart. After bending, we draw the wire through the sepal again and twist it with the stem.

The stem will be a wire, on which thin strips (about 5 mm) of green plastic are wound. In order for the layers to stick together well, they also need to be scorched.

If you want to create a whole composition, make leaves by cutting them out of green plastic, singe them a little, wind them around the stem.

You can bouquet and diversify the bouquet by combining them with cornflowers. Here you need blue plastic, the petals are cut out in the shape of cornflowers. A flower is going to be similar to a chamomile.

With this technique, you can make any kind of wildflowers, and even roses, if you can roll them correctly.

Option 3

Now let's try to make a giant daisy.

As you can see, to create such wonderful decorative flowers, it will take only a few hours of time, a bottle, an awl, a candle, glue and scissors.

Penguin

Plastic Coke bottles are useful for creating a penguin, due to their narrowed shape in the middle and expansion at the bottom, a believable penguin body is obtained from it.

Tools and materials:

2 bottles of the same size;
scissors;
cool gun with silicone pencils;
brushes;
black marker;
a piece of dense fabric;
white, black and red colors.

Step by step penguin assembly:

We cut the container in this way: the first, acting as the bottom, is cut in the middle or a little closer to the bottom, the second is the top of the penguin, so we only need the bottom. Rice. one
Now we connect both parts with slices to each other. Fig.2
When connected, fix with glue (you can use a silicone gun). Fig.3
Next, according to the plan, we will paint the body of the penguin. Select the type of paint so that it is not afraid of moisture. We paint the future toy in several layers. Rice. 4
When the paint coating dries, outline the chest and muzzle with a black marker. Fig.5
Paint over the outer part (behind the contours) completely with black paint. Leave only the top - this will be the place of the cap. Rice 5. and 6.
In principle, the penguin is almost ready. It remains only to paint the place left under the cap with red paint. You can, as shown in Figure 8, decorate it with black dots.
Draw eyes and a beak on the muzzle. This can be done with a thin brush and paints, or you can use colored markers. Rice. 9.
Cut a scarf from a small piece of fabric, tie it on a penguin.

Crocodile

Let's try together to make another toy for kindergarten - a crocodile.

Prepare for work:

two plastic bottles, 0.5 l;
twist plugs from the same container - 4 pcs;
sharp knife;
stationery scissors;
thin cardboard;
glue;
brushes;
waxed paper;
paints for drawing;
eye buttons.

Manufacturing and assembly instructions:

Cut the bottles first in half, then so that a distance of about 7 cm remains to the neck.

It is necessary to form the edges so that the body of the crocodile is slightly bent during assembly. As shown in the photo.

Glue the covers in place of the legs.

Form dense balls from cardboard - eyes, attach to the body.

Cover the entire body of the alligator with green colored paper.

Cut out eyes, teeth, paws from paraffin paper.

Paint the teeth (white), nostrils (black), eyes (also black) with a brush, or use dark buttons as eyes.

bees

These funny insects are very easy to make.

Option 1

Prepare ahead of time:

plastic containers with a capacity of 0.33 l;
sharp scissors;
acrylic paints;
cup 0.5 l;
brushes;
glue;
black tape;
wire;
stationery knife.

Instructions for execution:

From a plastic cup, cut out the wings of a bee, as shown in the photo.

The bottle does not need to be cut completely. We make only small cuts on the sides, with a clerical knife. These will be the placement of the wings.

Insert the wings into place, glue them.

Next, proceed to painting the bee. There are two ways to paint: paint the body black, then make yellow stripes, or vice versa, make it completely yellow, then draw black stripes. Let's use the first one - paint it dark.

Draw the eyes in white on the lid, and the mouth in red.

Option 2

You can make it in one copy, you can create a whole hive

To create a hive, prepare:

plastic bottles according to the number of expected number of bees;
yellow enamel or paint;
black electrical tape;
wash brushes - 4 pcs;
for the eyes - beads or buttons;
glue gun;
synthetic thread;
leg-split.

We paint plastic bottles yellow. You can do it a little differently - pour yellow paint inside, twist the bottle so that the paint evenly lies on the entire inner surface.

This method is a little more difficult and longer, but the coloring will turn out to be more effective and with gloss. In addition, it will not wear out, break or deteriorate.

This should be done in several stages to evenly paint the entire surface. Fill the bottle with paint, shake and lay on its side. As soon as the first layer of paint begins to set, twist it to paint the next area and so on until the end.

When the bodies of the bees take on a yellow color, we make transverse strips with black electrical tape.

On the lid we glue eyes, a nose from pre-prepared beads and buttons.

From another plastic container, we cut out shapes that look like wings. To them, at the same stage of work, we attach threads. For them, we will then hang the bee to the tree.

To the body of the bee, with the same glue gun, glue the thread with wings.

Color it yellow too. You can, again, use the complex method of painting. Or, in order not to lose a lot of time, just paint on top with a brush.

We will make the roof of the hive from wash brushes. We take them in a pile, tie them with twine.

On the lid of the bottle - this is our roof area, we apply a thick layer of glue. We spread the wash brushes on it so that they are evenly distributed on all sides. If somewhere they are a little unstuck, glue it.

Leave the craft for a while at rest to dry.

Everything is ready and the bees and the hive. It remains only to take it to the kindergarten and hang it on a tree.

In a similar way, you can make many bees, but without a hive and hang each one from a tree. Thus creating a real children's beekeeping center.

Creating bee crafts is an interesting activity, the work is not difficult. If the child himself makes it, under your strict guidance, it can be a good souvenir for grandparents. Such a craft will look very impressive against the background of the abundant foliage of a tree.

butterflies

Simple in execution and very interesting model of crafts.

Option 1

Let's prepare the materials:

plastic containers (a few pieces will be enough);
paper, not smaller than A4;
stationery scissors;
silver and brown nail polish;
sequins;
gel red pen;
rhinestones;
butterfly in a stencil.

Let's start making the insect:

First, let's prepare the bottles for work: wash, preferably with soap, release it from the label, dry it.

On a blank sheet of paper, scan or transfer the figure of a butterfly through carbon paper. For this we need a stencil. You will find it at the end of this subsection.

With a gel pen, you need to circle the contours of the insect on the plastic surface and cut it out.

We got a figure with wings curved down.

Turn it over, we need them to look up.

We take the gel pen again and draw all the lines, as shown on the stencil.

Paint over the middle (trunk) and antennae with silver nail polish. Let's draw the contours of the wings in the same tone.

Now with varnish you need to draw all the rulers, including the smallest ones, which were previously drawn with a gel pen.

Before the edges we put small dots (blotches).

Against the background of the silver drawing of the wings, we also put dots, only in brown.

We decorate the body of the butterfly with rhinestones. To do this, with any nail polish, put droplets and plant a pebble on top.

The butterfly is ready, for everything about everything, it took us a little time and material, which, for sure, will be found at home on the farm and with mom.

Similarly to the previous butterfly, we make another one, only this time it is plain and without pebbles.

We got two plastic butterflies, painted in the same tone.

If you stick a magnet to them, they will serve as a good decoration on the refrigerator or any other metal surface.

Option 2

Let's look at another implementation. We will paint it not with nail polish, but with stained glass paints. In the first version, we drew a butterfly on plastic, cut it out, and only then proceeded to coloring. Here the technology is different. We will draw an insect on the bottle, and we will paint it on it.

Let's prepare everything that is useful in the work:

stencil drawing paper:
plastic containers;
stained glass paints;
wire or thick fishing line;
scissors;
beads (several pieces of small size);
awl.

Step-by-step instructions for execution:

We transfer the butterfly from the stencil to the paper.

Redraw the insect on plastic. You can do it like this. We cut the bottle, adjust the drawing from the inside so that we can clearly see it from above. With a gel pen we transfer the contours to the plastic.

When we finish drawing, we can start coloring. Recall that we paint without cutting out the insect, the paint falls on the bottle, along the contours. After painting, leave the workpiece to dry. After it dries well, cut it out. Give the desired shape with your fingers.

We form the body. To do this, take the wire or fishing line that we have prepared, string a few beads on it. You can take the same color, or you can make it multi-colored, it's as your heart desires.

A butterfly, or not one, if you have made several of them, are ready. They can decorate indoor flowerpots, hook onto curtains by attaching a pin from below, it is better to glue.

If the insect is made by a child's hand, then it will be a pleasant surprise and a gift for March 8 for mom, teacher or grandmother.

Stencils for making butterflies

hedgehogs

Waste material has a lot of opportunities and ways to extend its life. Moreover, in every family there is at least something. Here you don’t need to buy or invent anything special, much less spend money on them. Let's try to make a hedgehog from the same waste material as used plastic containers.

For work we will need:

plastic bottle;
pine cones, about a dozen, as long as they are the same size;
two white caps, from the same bottles;
glue (you can use "Moment" or, if there is mounting foam);
colored plasticine.

Hedgehog creation technique:

First, we bring the container into the proper form: wash it, clean it from the label, wipe it and dry it.

On the prepared container, glue the cone directly on top with glue or foam (you can also use a glue gun if there is such an item on the farm). We start from the center, this will be the back of the hedgehog. We glue each cone as a separate element, after making sure that the previous one is firmly held.

If at least one of them falls, and the neighboring ones hold on tightly, then it will be difficult to “put” it in place. Take this into account and don't rush.

When all the cones - the needles of our hedgehog, are planted in their places, we will begin to form the muzzle. To do this, glue the bottle cap with black plasticine.

For the eyes, you will need white covers prepared by us. On them, in the center, we glue circles from the same black plasticine - these will be the pupils of the hedgehog.

Glue the eyes to the muzzle of the animal.

Now let's embellish our craft a little. What is a real hedgehog without stocks. We will make mushrooms, leaves, fruits with berries from plasticine. Then carefully lay it on his back.

You can create a baby for the company of an adult hedgehog by molding him with their plasticine. And since its dimensions will not make it possible to experiment with pine cones, the needles on the body can be made from sunflower seeds.

Helicopter

An interesting craft that you can do with your son for kindergarten. In this way, you will teach him to use various waste materials as a material for creating toys and other necessary things.

Prepare for work:

a small plastic bottle, you can use baby yogurt;
one tailor's pin;
3 tubes for juice;
scissors;
one ping pong ball
stapler.

Step by step work:

First, make a hole in the lid so that the tube can freely enter there.

Cut the bottle so that the upper (with a thickening) part remains intact.

Take the remaining 2 tubes, cut them to the length of the intended propeller blades.

Cross them and pin them in the middle with a pin. Insert the tail of the helicopter into the cork of the bottle. Make skids from the two remaining parts of the tubes, connect with a strip cut from the unnecessary part of the bottle with a stapler.

Attach the main part of the helicopter with skids with a stapler too. Insert a ping pong ball into the hole.

The helicopter is ready. A minimum of time was spent on it, and the child will have a lot of pleasure from a toy created by his own hands.

Matryoshka

Matryoshka is probably the only toy that more than one generation has grown up with. In addition, it is considered a symbol of Russia. Many foreign tourists, coming to our state, buy them as souvenirs. Is it possible to create such a complex figure with your own hands, and even from waste plastic? Yes, you can, let it not be as functional as modern ones in toy stores, but it will be personal and, for sure, the most beloved.

In creating such crafts, not only plastic food containers are suitable, we will consider this a little later. The toys that you see in the photo below are made only from the tops of the flasks. So they will be more stable. So that the edges are not too sharp, they can be processed with electrical tape.

In this photo, the top part is inserted into the bottom, the middle one is generally removed. This nesting doll has a more respectable appearance, looks more natural and believable. Painted with acrylic paints. Children will not succeed in doing the same, but there are many stickers and patterns of a similar image on the Internet. As a last resort, they have a lot of options to learn and draw nesting dolls on such a layout.

The following photo and the model itself can be attributed to multifunctional. Here is a nesting doll in its own design and a pencil case for storing pencils and pens. As you can see, it is not made from a food bottle, and their containers are from shampoo or cream.

Approximate drawings and schemes for creating nesting dolls from plastic containers in kindergartens and at home.

Bottle cut diagram

Handmade is popular in any manifestation, whether it is a gift to friends or joint creativity with a child. Water bottles, sodas, milk and juice bottles are a great base for crafts. The material is easy to process, durable, not afraid of precipitation, which is why craftsmen and eminent designers love it so much.

This is easy to verify by looking at the photo of crafts from plastic bottles. The ideas implemented on them are easy to repeat yourself, or they will become the starting point for creating new masterpieces in the interior or garden.

What to cook for work

An important plus of do-it-yourself objects is that any material available on the farm is used for crafts. Plastic containers for drinks are a universal "raw material".

In progress are:

whole bottles of any volume, including canisters;
separately necks or curly bottoms:
the main smooth part;
covers.

The advantage of the material is ease of processing. Preparations can be:

pierce with a knife, awl, clamp needle
heat so that the plastic takes the desired shape and hardens
cut with scissors, utility knife

For decor, depending on the idea, you will need paints, the remains of threads, scraps of fabric, natural material (cones, twigs), artificial flowers, leaves. There will be a use for old children's toys, broken garden tools, ribbons, foam rubber, wrapping paper.

Schemes for crafts from plastic bottles are easy to find on the Internet, but if you lay out the existing bottles and various waste materials in front of you, ideas will arise by themselves.

Big features of a small bottle

No complicated tools or special skills are required. But as a result you can get:

real animals and fictional animals;
organizers for storing small items, stationery, garden supplies;
figurines of people, animated characters, fairy-tale heroes;
flowers and various floral arrangements;
flowerpots and flowerpots for indoor and outdoor plants;
bird feeders;
decor details for interior or landscape design.

Original ideas for crafts from bottles do not necessarily involve cutting containers. As a result of simple manipulations with loosened soil and multi-colored paint, you can build:

low figured hedge or framing for flower beds,
flat silhouette of a flower, insect, animal;
smiley.

In this case, the bottles are simply sunk into the ground to the desired depth, and the protruding parts are tinted in the selected color.

A beautiful garden without much hassle

In the store it will not be difficult to buy a garden figurine of any subject. The same goes for flowerpots, decor for a recreation area or flower garden. But similar things made with their own hands look no less impressive. Crafts from plastic bottles for the garden can be made in winter, so that at the beginning of the season they can be installed in places of honor in the country.

artificial reservoir

Bottles of 1.5 liters are painted blue for 1/3 of the length, starting from the bottom. Then they are pressed into loose earth close to each other. No need to create perfectly smooth outlines. Let the artificial lake have an irregular shape.

It can be overlaid with large stones along the edges, and figures of waterfowl or water lilies can be installed “on the water”. Plants, by the way, can also be made from plastic containers.

locomotive

The shape of 5-liter drinking water canisters resembles train carriages. You will need whole bottles with a neck and soft plastic caps for homemade preparations. In the caps and sides of the bottles, two protocols are made from the bottom of the canister. Holes are located closer to the beginning and end of the workpiece on both sides. Then, with the help of flexible wire, the “wheels” are attached to the locomotive and trailers. Now the composition can be painted.

The neck of a soda bottle looks like a pipe, it can be inserted into the hole on the nose of the "engine". If rectangular holes are cut out on top of the cars around the perimeter of the bottle, soil is poured inside, then the train turns into pots for climbing and low plants.

Hares, pigs, and elephants

Cut off the top of a large round canister - and you get the body of an animal, on which even an inept artist will depict a muzzle and paws. From another bottle, you can cut long and thin ears, insert them into the slots closer to the edge of the bottle. Get a recognizable bunny.

The ears are rounded and small in size - for a bear cub, huge and wide ears - suitable for an elephant. If you place the canister horizontally, leaving a spout with a lid, then the small pointed ears and pink color will help turn the bottle into a perky pig. A crochet tail is obtained from a small bottle cut in a circle.

Excellent crafts are created from plastic containers cut to the desired height. If you make holes on the sides and insert a wire or twine as a handle, you get a convenient basket for picking berries.

It can be painted, glued (tied) with colored ribbons or twine, artificial flowers can be added. You can decorate the tuesok with an old lace doily or create a pattern from coffee beans.

1000 ideas for 1000 things

A detailed description of crafts from bottles for novice designers can be continued with such organizers that are necessary in any home.

Proponents of minimalism will appreciate the prefabricated composition of bottles with a cut neck, different in height and volume. They can be fastened together with a wire, stretching it at the puncture points and tightly twisting it into a flagellum inside the containers. Multi-colored caps, beads, applications made of fabric or self-adhesive paper will help to close the attachment points.

Hanging organizers are indispensable in the bathroom, home workshop, in the garage, in the corner of the needlewoman. You can make a rigid mount by cutting a hook or loop from a part of the bottle so that they are one piece. Or choose the option with fastening on a rope or wire according to the principle of a bow at a bucket.

Shaped baskets. Soft plastic is easy to arrange in the form of a basket. Then you can store, for example, cosmetics in it. It is appropriate to make a box for spices in the kitchen, and if thick foam rubber is laid on the bottom of the box, then the rings and stud earrings will look original in it. The edges of such baskets can be wavy, smooth, serrated.

Another idea for filling is a floral sponge. You can fix artificial buds in it or create a composition of fresh flowers.

Can apple trees bloom on Mars?

A master class on crafts from plastic bottles will be incomplete if you bypass the plants created from them. An exotic palm tree can easily grow in a house or garden, even if you live in central Russia.

For flower arrangements, you can do:

Inflorescences from figured bottoms. It is enough to paint them with bright colors and install them on a rigid "stalk" of wire. Leaves can be made from green bottles.

Exotic buds. From a soft plastic center, you need to cut four-pointed holly blanks of different sizes. They can be connected in pairs, combining details of different shades, but from the same color scheme. Each detail needs to be slightly shifted relative to each other, to create volume by bending the petals to the center or to the bottom of the bud.

Composite flowers. Rounded petals are prepared in advance and slightly melted over the flame of a candle. Through the holes made at the bottom of the petals, a bud is collected on a flexible wire.

Fairy lights. The easiest way to assemble them is from multi-colored bottoms from bottles with a volume of 0.5 to 1.5 liters. You can string buds horizontally or create vertical flowering vines. They can block the entrance to the gazebo or hang from the trees in the garden.

The leaves are cut small and round, tall and thin, like sedge, or with soft curves, like in wildlife. The latter option is easily obtained from strips cut by a wave, slightly scorched over a candle fire.

Bonus ideas

Before you enthusiastically engage in creativity, you can familiarize yourself with a small kaleidoscope of ideas available for implementation:

mosaic on the garden path or the wall of the gazebo from plastic covers;
corrugated pipe or hose from an old vacuum cleaner as an elephant trunk, bird neck, giraffe, animal legs (a rigid wire frame is inserted inside to give the desired bends);
the bottoms of multi-colored bottles instead of mini-plafonds for a garland;
cans of rinse aid and other detergents to create bizarre figures, funny faces;
a bottle as a sprinkler (pierced with a thin needle and put on a garden hose) or an automatic watering container.

It is not difficult to make sure that a plastic bottle is an inexhaustible source of ideas for creating useful little things. For more instructions on how to make a craft with your own hands, see our video.

Create, please others and enjoy the process of creation yourself. Remember that giving bottles and canisters a second life, you make the world cleaner and brighter!

Photo of crafts from plastic bottles

Plastic bottles are considered to be garbage and sent to the appropriate places - trash cans and landfills. But in the right, creative hands, these things can sparkle with new colors. And you don't have to be a master to breathe a second life into ordinary plastic. You just need to have a little patience and imagination.

Crafts are quite simple and everyone can do such things with their own hands. Or maybe for someone this business will become a real hobby.

Useful things from garbage

Plastic bottles come in different shapes. They are also different in color and size. Therefore, it is quite possible to make small decor items for the garden plot from them. And for a summer residence, plastic furniture or even a summer gazebo built from the same plastic utensils is quite suitable.

And even caps from plastic bottles in skillful hands can turn into real masterpieces - a mosaic on the walls, a hot stand, cute toys for a child and other useful little things.

Everyone can make this or that little thing. This is where fantasy plays the main role. After all, the material for making crafts is almost everywhere. They can be found in the park, on lawns, near the river and in landfills.

And collecting them for his creativity, a person thereby purifies nature from harmful things. After all, plastic today has become a real disaster that threatens the environment. This material is durable, so the constructed crafts from plastic bottles will serve and delight for a long time.

Where to begin

In every decision, the main thing is a plan of action. In order to start working on the craft, you will need the following:

a detailed description and photo of crafts from plastic bottles or one separate craft to choose from;
bottles of suitable sizes and colors;
additional materials and tools that may come in handy: a knife, scissors, adhesive tape, glue, paint, fabrics, etc.

Then you just need to be patient and follow the instructions. And soon the children will enjoy the new fabulous playground, the guests will be happy to spend time in the “almost crystal” gazebo, and the hostess will appreciate the unusual practical appliances in the kitchen.

Boxes

You can make an excellent box from plastic bottles, in which it will be convenient to store various little things: hair ties, buttons, paper clips. To do this, you need two lower parts of plastic bottles of the same size. They are interconnected by a zipper, which is sewn along the edges.

Or a simpler option is to cut off the top of the bottle in the place where it begins to narrow. The container is ready. It remains to decorate the bottle with decorative ribbon, buttons and beads. They are glued on. Sew a cap from the fabric, which is tightened with a cord and glue it to the edge of the container in the same way.

And it’s not at all difficult to make a convenient and original sandwich container that you won’t be ashamed to take to school or work. The main thing is to decorate it with a plan. And it is done in just a few steps.

The bathroom also has a place for a plastic box in which you can put all the necessary accessories: toothpastes and brushes, washcloths and shampoos. If these boxes are hung on the wall one above the other, then you can free up space.

Plastic bottles can make an unusual stand for pencils and pens. It is enough to cut it in a circle in the shape of a muzzle of a cat or an owl and paint it. In the same technique, a vase for flowers is made. Only for its stability, a handful of small pebbles should be poured onto the bottom.

Playground toys and decorations

To decorate playgrounds, decorations are made in the form of plants, animals and even insects.

For a palm tree, you need about 15 brown bottles, from which the trunk of a palm tree is made, and 7-10 green bottles for leaves. The barrel is assembled from bottles cut across, stringing them on a frame made of a strong rod.

To create leaves, green bottles need to be cut lengthwise, forming the desired shape. To make longer leaves, you need to attach an additional one to the main sheet using a stapler.

You can decorate your garden plot even in winter. Funny penguins in colorful hats and scarves will cheer you up on a cold winter day. You can make penguins of different sizes. For one bird, you need two identical bottles that have a "waist" at the bottom.

This bottle needs to be cut in half. This will be the body of the penguin. At the second bottle, you only need to cut off the bottom with a small margin - these are the legs. Connect the two parts with a glue gun, paint. Make a pom-pom out of wool and a scarf out of a strip of fabric.

Such crafts are not stable, since plastic is a very light material. In order for the penguins to stand quietly in the chosen place, they must be filled with sand or small pebbles before gluing the parts.

Even plastic lids in skillful hands turn into cute ladybugs. You just need to color them accordingly and stick funny eyes.

If the plastic lids are connected to each other by the edges in the form of a small circle, then you get an original stand for a hot pot or kettle. Such a device is useful in the kitchen.

Flowers and plastic bottles

Flower beds can also be decorated in an original way with plastic bottles. If you take the lower parts of the bottles, paint them in different colors and stick them into the ground next to each other, you can create a flower bed that will “bloom” all year round.

The tops of bottles with caps can also be used as flower pots. They are not stable, but in the form of flower pots they will look fabulous.

From plastic bottles with a volume of 3-5 liters, you get a bright flower bed-train. In each bottle, you need to cut one side part. Paint in different colors. Fill the bottles with earth, transplant garden undersized flowers into them. Lay them horizontally and lean against each other, creating wagons.

Furniture and buildings

The construction of a summer gazebo will require more costs and effort. After all, for construction, you will first need to make a frame of wood or metal. The walls are built from whole bottles, which are strung on a wire or rod.

First, a hole is made in the bottom of the bottle, the cap is unscrewed. A rod with strung bottles is attached to the frame in a horizontal or vertical position.

With the help of bottles, you can create a sofa, armchair, ottoman. Here you must first make separate blocks: seat, armrests, backrest. Then connect them, according to the design. Blocks are best made from 2-liter identical bottles.

On the top of the bottle (where the cap is) you need to put on the bottom of another bottle so that the bottom of the bottle is on both sides. All bottles, blocks are attached to each other with adhesive tape. To make the seat soft - you need a foam block of a suitable size. Sew a cover according to the size of the furniture.

Photo of crafts from plastic bottles

Plastic bottles have appeared for a long time and, in addition to their direct purpose, are used for a variety of purposes. Due to their durability, bottles are widely used in the country, where they are used to make crafts, vases, furniture and even greenhouses. Fantasy is not limited by anything - after all, the sizes and shapes of the bottles are varied, they bend and cut easily. Bright plastic figures will decorate the summer cottage and reduce the amount of garbage.

General principles for working with plastic bottles

If there is a desire to decorate the cottage with crafts from plastic bottles, you need to collect a lot of them: you will need both ordinary ones from water or lemonade, and denser ones from shampoo or dish detergent. You can take large five-liter and small half-liter bottles - everything will go into business.

Instead of throwing plastic bottles in the trash, you can use them to decorate your summer cottage.

First, the plastic must be thoroughly washed with soap or dish detergent. It is good to do this by soaking the containers in a large bowl of hot (60-70 ° C) water and then rinsing them out of the hose under strong pressure.

To cut out some details, you will need sharp, durable scissors or a knife. To decorate the bottles, you will need waterproof, quick-drying paints:

To make the paint fit well on the plastic, you can use:

nylon brush (hair stripes may remain, you need to paint at least two layers);
foam sponge (wetting movements, also covered in two layers).

Plastic bottles from a can of aerosol paint are best stained.

Making a playground with crafts from plastic bottles

If the garden plot is large and it is possible to organize a playground on it, plastic animals, birds and fairy-tale characters will perfectly fit into its design, because the figures will be bright and durable. Cunning cats will chase nimble mice, gnomes will look after the plantings, a red fox will settle next to a cowardly hare, and an elephant near a fence with bright sunflowers. Bees, unlike real ones, will not sting, and the bull will butt. On the playground with such figures, children will have fun and interesting.

Photo gallery: figures from plastic bottles for a playground

To make funny gnomes, you will need not only bottles Children will not sit in such a train, but toys can ride Cute bottle cats will decorate any playground Bottle mice are well suited for small flowers or greenery
For crafts, you can also use dense bottles of detergents. A touching baby elephant with a flower in its trunk looks beautiful against the backdrop of sunflowers. The frog princess and her frog friend are comfortably located among the green grass. With the help of gray, black and white paint, funny hare and mouse are obtained. can be planted in a flower garden. A bull from a plastic bottle is not at all scary. If you use a little imagination, exotic penguins will settle in an ordinary summer cottage. Children will be interested in the playground with favorite cartoon characters.

How to make a bee from a plastic bottle

It is no secret that children are often afraid of flying and buzzing insects, although in most cases bees, beetles, wasps fly about their business and do not touch anyone. In addition, they bring considerable benefits to the garden, pollinating trees and shrubs. To make small summer residents less afraid of bees, you can make them from plastic bottles. The smallest will do, from 300 ml to 0.5 liters. Procedure:

Pour yellow paint into a clean bottle (about a third).
After pouring the paint into the bottle, you need to carefully screw the cap and shake
After screwing the lid on carefully, shake and turn until the paint covers the entire bottle (if it doesn’t work, you can add more paint).
Stick black thin tape on the strips of the bottle (several rows).
For strips, use thin black tape.
From a clean bottle, cut out two wings and bend the tips with corners in the place where the wing will be attached to the bee.
To make the wings even, it is better to use a stencil
Insert the wings into the slots on the back.
In order for the wings of the bee to hold well, it is necessary to bend the corners at the tips
Draw a muzzle on the lid with a thin brush and paint or varnish.
The muzzle of the bee must also be drawn with indelible paint

Decoration of a recreation area with plastic bottles

Gardeners are hardworking people, but sometimes they also want to relax. Relaxation corners are usually designed with special care: after all, you want it to be beautiful and cozy. As elements of landscape design, you can use crafts from plastic bottles. In the relaxation zone, you can place unusual animals and birds, artificial flowers and palm trees, colorful flower beds and even a plastic house.

Photo gallery: crafts from plastic bottles for a holiday corner in the country

It’s easy to make such a hedgehog, you just need to wrap an old bottle with a net and fill it with earth An old broom plus a five-liter painted in bright color - that’s the hive for plastic bees. If you make a house out of bottles and cement, it will be quite strong To lay out a whole wall of bottle caps , it will take a lot of time Simple, but bright vases from bottles can be placed on the porch or veranda Inedible, but very bright fly agaric attract attention With the help of red and black paint, you can lay out a bright flower bed of plastic bottles Palm trees do not grow in our area, but why not arrange imagine a paradise island with the help of skillful hands?

How to make a bird out of plastic bottles: ideas and instructions

To decorate the recreation area, you can make very beautiful fabulous birds: a swan, a peacock, a firebird or a flamingo. The basis for all birds is the same, only the color of the feathers and the shape of the head and tail are different.

Photo gallery: birds from plastic bottles

A cheerful cockerel, of course, will not wake you up in the morning, but it will create a great mood for the whole day Romantic swans in the pond are a real masterpiece of plastic art Hunting lovers will surely like the capercaillie Pink flamingo looks very bright in the middle of green grass

For the manufacture of birds, you will need bottles of different sizes: large five-liter and liter ones, as well as wire, corrugated pipe, metal-plastic pipes or rods for legs. It is important to thoroughly wash, degrease and paint all parts before starting to assemble the bird, since this cannot be done in finished form. Procedure:

Photo gallery: feather options for decorating a bird from a plastic bottle

To cut such feathers for a swan from a plastic bottle, it will take a lot of time. For a chic peacock tail, the feathers overlap each other. To make a plastic multi-colored parrot, feathers will need to be not only cut, but also painted. plastic bird more like the original

Video: plastic bottle swan

Plastic flowers are not a replacement, but an addition to real ones

Both real and artificial flowers will harmoniously look in the rest corner. They will last a long time and save money on arranging a summer cottage.

Making chamomile from plastic bottles: a master class

One of the most popular flowers in Russia - chamomile - is easy to make from white plastic bottles and wire. Procedure:

Cut the bottle into two parts: straight and tapered.
Two or three more bottles are also cut into two parts and cut off the necks.
For the middle of chamomile, use a yellow or orange cover.
Pass the wire through the bottom of the chamomile, securing it through the lid.
You can cut the petals out of a green bottle and attach them to a wire stem using thin wire or a lighter (if you heat the plastic leaves, they will firmly attach to the stem).

Video: chamomile from a plastic bottle

Among the plastic flowers there are also guests from hot countries, for example, lotus, and lilies of the valley familiar to us, as well as bright tulips, colorful asters and fabulous flowers that do not have "prototypes" among the real ones.

Photo gallery: flowers from plastic bottles

Until real tulips have blossomed, you can decorate a flower bed with plastic ones - you can’t distinguish them in a few steps You can make a lily of the valley from milk or kefir bottles Bright sunflowers will create a sunny mood on the site Red and white bells are in harmony with the brick wall of the house
Plastic lotuses in a vase will serve as a wonderful decoration for a summer cottage

Bright crafts from plastic bottles are not only decoration. They help brighten up leisure time in the country, save the family budget, unite the whole family for creative work and reduce the amount of garbage.