Fastening the stretch ceiling to the ceiling: installation system. Overview of various methods of installing stretch ceilings How to attach a stretch ceiling to walls

Stretch ceiling is a popular solution for interior decoration of residential and office space... The reason for this is originality and unusual view such a finish. Unlike pendant plasterboard ceiling, stretch ceiling allows you to create a perfectly flat ceiling surface without noticeable joints.

Peculiarities

Stretch ceiling is a sheet of material fixed under the main ceiling using special baguettes. The shape of such a ceiling can be rectangular, round, oval or irregular.

The material for the manufacture of ceilings is PVC film or fabric treated with a polymer composition. PVC use film or fabric makes it possible to make a ceiling using a seamless method. But the seamless method is only suitable for small ceilings... When finishing large area the prepared sheet is cut into several pieces, which are subsequently joined and stitched.

Oddly enough, but in a properly welded ceiling, the seam is the most durable place

Color palette

Stretch ceiling can be either monochromatic or combine several shades. Patterned ceilings available applied to Pvc film... The ceiling can have a delicate pastel or bright shade, simulate a marble, wood or metal surface.

Film ceilings have the most shades (more than forty)... Behind them are ceilings with a satin texture (about ten colors), in third place matt ceilings, color palette which is limited to pastel shades. The most modest color palette of metallic ceilings.

Advantages and disadvantages

Advantages of stretch ceiling structures:

aesthetics;
strength;
fire safety;
moisture resistance;
environmental friendliness;
unpretentious care;
thermal insulation.

The disadvantages include:

high price;
instability to mechanical damage;

Stretch ceiling fastening systems

Harpoon method

The method is used when installing film ceilings... The harpoon strip (seal around the perimeter of the film) is welded to the film at the factory. The canvas must be installed in an aluminum profile (baguette), which has a groove, insert the spike of the harpoon into it and seal the formed joint decorative overlay... Before attaching the stretch ceiling to the plasterboard, a plasterboard box must be pre-mounted on the wall.

The whole the installation process takes place at an air temperature of 40 degrees... This is necessary for better stretching of the film. First, one end of the film is inserted into the harpoon, snaps into the bar. Further the film heats up to 70 degrees and the rest of its ends are attached.

Since the harpoon is welded at the factory, it is initially necessary to measure the ceiling as accurately as possible. The plank should be 10-15 centimeters less than the ceiling perimeter... This is necessary in order to install the film with the required tension.

Staple or wedge method

The technology for attaching stretch ceilings of this type is based on the latch principle. At the same time, the fabric is automatically stretched... Installation consists in the fact that the edge of the canvas is inserted into the groove of the baguette and fixed with a strip, which also serves as a decoration. Here the dimensions of the canvas should also be several smaller sizes ceiling area... At the end of the installation, the ends of the film may protrude from under the strip, which are carefully cut with a knife.

The technology of mounting stretch fabric ceilings does not require preheating when fastening

Cam method

Provides for the use of a mounting plate equipped with “cams”, the upper one of which is a spring. When the blade is pulled between the cams, the spring is pushed back and then clamped even more tightly. This design uses a smaller fastening profile, which allows you to install a stretch ceiling at a distance of only 8 mm. from the main one.

Installation work

To carry out the installation of a stretch ceiling with your own hands, you will need:

plastic or aluminum profiles (the second option is preferable, since aluminum is stronger);
fabric or film (depending on the type of ceiling);
dowel-nails;
putty knife;
laser level;
construction hair dryer.

This requires:

clean the ceiling, remove peeling plaster from it so that it does not subsequently crumble and spoil the film;
if indoors, high humidity, then in order to avoid the formation of a fungus on the ceiling, it is necessary to pre-treat it with an antiseptic;
lay out the wiring in advance, and also outline the places for fixing the fixtures.

How is a stretch ceiling attached to a wall? - Installation work start with wall markings using a laser or water level. To do this, it is necessary to apply a level to the lowest point of the ceiling, making an indent of 1.5 cm for fabric ceilings and 4-5 cm for film ceilings. In this place, using dowel-nails, it is necessary to fix the cornice (aluminum profiles). The distance between the fasteners is 20 cm.

Next, we attach the edges of the canvas to the corners of the room and turn on heat gun. When the canvas warms up to 40 degrees, starting from the center, we insert the remaining ends of the canvas into the baguettes. After that you need to install decorative skirting boards, which are designed to hide the joints.

Installation of lamps

Before fixing the luminaire in a stretch ceiling, it is necessary to prepare a place for it on the main ceiling in advance. After installing the canvas, attach reinforcing rings to it in the places of the intended lamps and carefully cut the canvas along the inner edge of the ring. Pull out the wires, connect to the lamp and fix the plafond.

Since you cannot directly fix the chandelier to the stretch ceiling, then installation of chandeliers is carried out on a hook pre-installed on the main ceiling or mounting strips. Anyway all the load falls on the main ceiling.

It is advisable to use diode lamps so as not to unnecessarily heat the ceiling

Price

Depending on the type of material, its texture and type of ceiling (single-level or multi-level) and the country of the manufacturer of the material, the cost of the ceiling may fluctuate. Wherein, cost of one square meter canvases from 150 to 3300 rubles.

Cost per meter aluminum profile on average 100 rubles... The installation of one meter of the profile will also cost the same. These items already include the cost of screws and other fasteners. Installation of the canvas in the profile is 150 rubles per square meter.

Stretch ceiling today is the best solution for apartments and houses. It helps to give the room more volume, hide the flaws of the base floor and wires, and protect against leaks and noise. Their installation is easy and does without annoying construction waste... And one more indisputable plus - stretch ceiling very effective.

Reliable fixing to the ceiling: stretch ceiling as part of interior design

V recent times in the market of building finishing materials, stretch ceilings do not occupy the last place. It became possible to choose a vinyl sheet of different structures. Distinguish between matte, satin, glossy. Also, the stretch ceiling can be seamed and seamless.

Mounting methods

In general, the technology for attaching a stretch ceiling implies the use of different ways fixation.

Among them, the most common:

Harpoon;
Harpoonless;
Cam.

Each of them is distinguished by the level of complexity of measurements, cutting of fabric, installation and timing of work.

The reliability of the entire structure depends on the quality of the selected mounting method.

As a rule, specialists choose exactly the installation method that is ideal for a particular room, taking into account all its features.

Common ways of attaching a stretch ceiling to a ceiling

Various methods are used to secure a stretch ceiling. But all methods are united by a baguette fastening. Its essence lies in the fact that a profile is attached around the entire perimeter of the room, to which, in turn, the material of the stretch ceiling is mounted. And after that common features in the installation ends, because depending on the size of the room, it depends on which type of fastening will be chosen.

First of all, the installation takes into account the evenness of the base ceiling. If it is relatively flat and the light source is a large chandelier, then ceiling mount is used. With the curvature of the rough ceiling, it is better to fix the ceiling to the walls.

If you decide to take such a desperate step as self-installation ceiling, then consult with experts, watch the video tutorials.

Basically, three main installation systems are used: harpoon, harpoonless and cam.

The harpoon method is the most difficult and time consuming. It requires accurate measurements and maximum correspondence of the canvas to the parameters of the room. If the specialist decides to fix the ceiling in this particular way, be prepared for the installation to take more than one day.

Advantages and disadvantages of fastening methods

One of the advantages of this method is the ability to reinstall the ceiling if necessary. There are many more disadvantages.

These include:

Labor intensity of the installation process;
The presence of a weld (harpoon);
Application only when installing PVC ceilings;
The presence of slack in the center;
The distance from the main ceiling is 5 cm;
The welded spear is the weak link in the system.

The next method is harpoonless or wedge-shaped. It is also called the glazing method of fastening. This is the most accessible type of installation, therefore it is used more often.

The benefits include:

Possibility to use with plastic, foam plinth or flexible insert;
Technology availability;
In the event of a leak, it is possible to dismantle only the damaged part of the web;
Can be used in round rooms.
A universal system for installing stretch ceilings has not yet been invented.

Disadvantages of wedge mounting:

The inability to dismantle the ceiling;
The presence of a centimeter gap between the ceiling and the wall;
Possible loosening of the fastening;
This method cannot be used for installation. multilevel ceilings with foam plinth and round level transitions.
The cam method is more complicated than the harpoonless one.

But among its obvious advantages:

The ability to attach the canvas as high as possible;
No gaps;

The disadvantages of this method include the impossibility of installing ceilings in large rooms without the use of additional stiffeners. Before the master starts installing the ceiling, discuss not only the structure, drawing, cost, but also other nuances of installation work.

Possible ways of attaching a stretch ceiling to the ceiling: diagrams

For each type tensile structures own fastening system is selected, the scheme of which is not only individual, but also worked out to the smallest nuances.

The fastening system reflects to some extent the nationality of the manufacturer.

There are Dutch and French types of fasteners that are popular when installing decorative canvas. The staple (wedge) fastening system was developed by Russian craftsmen. It is used for installation vinyl ceilings domestic firms - manufacturers. This fastening system is not designed for denser structures. But, nevertheless, the use of a glazing bead (wedge) during installation significantly reduces the cost of the installation process.

The material on the choice of accessories for stretch ceilings will also be useful:

Frequent question: is it possible to attach a stretch ceiling to the ceiling

When installing a stretch ceiling, depending on your wishes, decorative elements and other finishes may be present. It all depends on the capabilities of the premises and the qualifications of the specialists. One of the frequently asked questions from customers to installation specialists is: "Is it possible to attach a stretch ceiling to a ceiling?"

If the master shrugs his shoulders indifferently, then it is better to refuse his services. An experienced craftsman will draw your attention to how exactly the builders laid the slabs. Only on how flat the base ceiling is. It depends on this whether the profile will be fixed to the ceiling or walls.

Installation of stretch ceilings (video)

Most stretch ceilings are installed in one day. It all depends on the complexity of the design, on which canvas you chose, and, accordingly, the fastening system determined by the master. Do not be confused by a longer process, because the result will certainly meet all your expectations!

In the middle of the 20th century, a rather unusual look was invented in Switzerland ceiling covering, called today a stretch fabric. In our country, such ceilings are considered French, apparently because France is their largest manufacturer.

It should be noted the splendor, beauty, aesthetics, as well as the variety of shades and textures of this coating. Stretch ceilings have the ability to visually influence the geometry and dimensions of a room. Many owners who start repairing dream of decorating the shelves of their apartment in this way, and it is quite possible to do it yourself. The main thing is to understand how to fix a stretch ceiling, and what this material is.

Stretch ceiling - a polyvinyl chloride canvas fixed in a profile or a knitted fabric made on the basis of polyester.

In addition to aesthetic appeal, stretch ceilings have significant advantages. We propose to evaluate these advantages by comparing them with suspended ceilings:

When installing suspended ceilings, whole line work to eliminate various defects:

meticulous leveling of slabs;
sealing cracks, seams;
putty of attachment points.

Despite such a difficult preliminary preparation of the base, it will be extremely difficult to end up with a perfectly flat ceiling surface. But stretch ceilings really give an excellent opportunity to get a flat surface.

Fastening the ceiling sheet is less troublesome, in contrast to false ceiling... Recall that when installing a suspended ceiling, you have to:

empty the room from furniture;
spend a lot of time cutting, making bends of drywall, as well as subsequent filling and painting;
wash the room, remove the abundance of dust and accumulated debris;

To fix the stretch ceiling, it will be enough to warm up the room, gently stretch and then fix the canvas. Another advantage of stretch ceilings is a guaranteed long service life (about 10 years).

Moisture resistance is another advantage. The stretch ceiling is absolutely not afraid of moisture. If suddenly flooding occurs by neighbors living on top, the stretch ceiling will only bend under the body of water, but it will not break. After you pump out the water, your stretch ceiling will return to its original position.
Strength is another plus in the treasury of stretch ceilings (100 kg per 1 m²).
Fire safety.
Perfect for rooms with low ceilings (they take up to five centimeters of the room height).

Minuses

Damage can be easily inflicted with any sharp object.
High cost (price for 1 m² - from 200 rubles).
The editing process is actually not as easy as it sounds.
Special equipment required.
It is impossible to build in luminaires of more than 50 W, since they will heat the canvas, and because of this, it will lose its elasticity.

Consider the option of mounting the ceiling of a room that does not have protrusions and ceiling communications. The film will be attached using a special baguette profile.

At the first stage, armed with a water level, you need to determine the lower corner of the room, then indent two centimeters from it and mark (these centimeters will be needed to fix the profile). Exactly how to measure and apply zero level on all walls of the room (along the perimeter).
Next, you need to measure the corners of the room, which is important for the precise joining of the profile parts in the corners. For this purpose, a special folding protractor is used.
At the third stage, a profile rail is to be prepared. In the case when the rail is longer than the width of the room, the edges of the rail must be cut at an angle equal to half the corner of the room (you can measure it with a folding protractor). If the rail turns out to be shorter than the width of the room, then one corner should be cut at an angle of 45 °, and the other at an angle of 90 ° in order to achieve a clear abutment of the profile parts. Then the missing piece of the profile is taken and filed in the same way, but the bevel is now done for the opposite corner. The sawn sections of the profile are glued with glue.

The prepared profile must be fixed on the wall using dowels at the level you marked in advance (you can also use self-tapping screws).
For this, the heat gun (fan heater) is switched on and the room being repaired is heated to a temperature of 40 °.

Next, you need to unwind the film, heat it to about 60 °, trying not to bring it close to the heat gun.
Having prepared the film, you can start the process of stretching it.
You need to start attaching the canvas from the base angle (the mark is applied to the film). After fixing the base corner, the blade is attached in the opposite corner (diagonally).

After fixing all the corners, you need to fix the sides of the canvas (from the corners to the center).

We examined the process of fastening film-based stretch ceilings. Installation of fabric ceilings should be carried out starting from the sides, followed by fastening the canvas in the corners of the room.

Video

We bring to your attention a video about fastening a stretch ceiling.

In an apartment or private house it will become good decision finishing the ceiling with stretch canvases. This will help hide the unevenness of the base, hide various unseemly communications under the material (electric wires, hood, etc.). Stretch ceilings have many advantages. There are a huge number of their colors and textures. This finish will harmoniously fit into almost any type of interior.

Installation organizations carry out the installation of canvases is quite expensive. If you want to save money on the family budget, if you have enough free time, you can do all the actions yourself. How are stretch ceilings installed? will be discussed in detail in the article.

Material selection

There are two main varieties stretch ceilings. How to install presented designs, directly depends on their features and characteristics. Distinguish between fabric ceilings and PVC film finishes. The choice depends on the type of premises, as well as on the preferences of the owners of the house.

Fabric ceilings made of polyester material. It is impregnated with polyurethane to impart the required durability and wear resistance. Almost any pattern can be applied to the surface of the canvas. It can be one color, a drawing, or even a picture. Fabric ceilings due to features performance characteristics installed in the living room, bedroom, children's room or study.

The PVC film has a glossy surface. It gives the room a solemnity and beauty. Such a canvas does not allow moisture to pass through, it is not afraid of splashes. The film can be installed in bathrooms, kitchens and other areas. Cheap varieties of material can give off an unpleasant chemical odor. This is harmful to health. Installing such canvases in the bedroom or nursery is highly discouraged.

Interested in is it possible to install stretch ceilings, you should consider the technology of this process. Film and fabric mounting has a number of differences. Before starting work, you need to know about this in detail.

Installation methods

Studying how install a stretch ceiling in the bathroom, in the kitchen, bedroom or living room, it is necessary to familiarize yourself with the existing techniques for carrying out this process.

The PVC film is mounted on the base using glazing beads or special wedges. The harpoon method can also be used in this case. It is considered to be a rather complicated but reliable way. The fact is that there are no canvases with welded harpoons on sale. They will need to be attached to the film using special equipment. This procedure is carried out by specialized organizations. The processing cost is quite high. This is due to the use of sophisticated high-tech equipment.

Most often with self-assembly glazing beads or wedges are used. When installing around the perimeter of the room, a special rigid baguette is installed. It has a certain kind of profile. Shtapik assumes the use of special additional fasteners. The fabric is wound into a baguette. It is fixed with a bead inside the structure.

There are also clip-on clamps. First, the film is wound inside the profile. Then it is closed. The baguette holds the material securely inside. There are many different ways to fix a stretch ceiling in a profile.

It is easier to assemble fabric ceilings yourself. In this case, the frame is also mounted around the perimeter of the base. The canvas is clamped in it. The difference lies in the method of stretching the material.

Preparatory stage

Studying the technology of how to install a stretch ceiling with your own hands, need to consider detailed instructions this process. First, you will need to carry out a number of preparatory work.

All furniture is taken out of the room. If necessary, the walls are putty, finishing Finishing work... It is also necessary to prepare the base of the ceiling itself. It shouldn't stay on it old whitewash, paint. If the material starts to crumble, it will ruin appearance stretched canvas.

The seams between the slabs should also be coated with putty. The walls should be flat. This will greatly facilitate the process of installing profiles. You should also pre-mount all communications, bring the wires for the chandelier or spotlights... You can hide under the canvas ventilation duct. How to install a spotlight in a stretch ceiling? WITH there is a specific instruction.

If you plan to install a chandelier in the room, you need to prepare a base for it. It is possible to lengthen an existing hook by reinforcing it with an additional metal chain. You can also build a special base. It should not reach the surface of the canvas by a few centimeters.

Required tools

To install a stretch ceiling in the room, bathroom or kitchen, you should prepare everything necessary equipment... Some are at hand for everyone home master... Some of the equipment will most likely need to be purchased.

First of all, for installation, it is necessary to prepare a screwdriver and a hammer drill. You will also need a tape measure, a building level. It is necessary to install the canvas in profile using special blades. You will need to purchase a set of them. You will need straight and angled blades.

You should also choose a certain type of canvas for a stretch ceiling. In this case, the operating conditions of the finish are taken into account. After that, profiles are selected. They can be plastic or aluminum.

Various optional accessories can be selected. They are presented in the form of multi-colored inserts. Also, if necessary, purchase clamps, accessories for the installation of lighting devices (glue, plastic rings).

If the PVC film is stretched, you should purchase a special heat gun or a hair dryer. This equipment will allow you to properly mount the canvas.

Profile installation

By choosing which stretch ceiling to install indoors, picking up everything necessary materials and tools, you should consider the procedure and stages of the installation itself. First you need to do correct markup walls. For this, the height of the walls is measured in all four corners of the room.

After measurements, appropriate marks are applied to the surface. The difference in height can be about 5 cm or even more in some apartments. Having determined the smallest distance from the floor to the ceiling, it is necessary to subtract from the result obtained the space that will be allocated for the ceiling communications. If a chandelier will be installed in the room, you need to take into account the height of the platform for its fastening.

After the calculations made using laser level a line is drawn on the walls in the room. The profile will be installed on it. This mark should be perfectly level.

After that, you need to familiarize yourself with the technology of how to install a curtain rod on a stretch ceiling. A profile is installed along the marked line using dowels or self-tapping screws. The step between the fasteners should be 7 cm. To simplify installation, you can first glue the profile to the wall. This way it will not move.

Installation of a film ceiling

Many aspiring installers ask how many stretch ceilings are installed. It should be noted that the duration of this process depends on many factors. Professionals do all the work in one day. A beginner master will take more time.

The installation starts from the base angle. Clips should be installed. They are fixed in the corners of the room. First, one edge of the canvas is attached. Next, the opposite corner is fixed with a clothespin. Then all the edges of the canvas should be secured with clothespins.

After that, you need to direct a stream of hot air (at least 70 ºС) onto the canvas. Then, in turn, the corners of the web in the profile are fixed using a spatula. The clothespins are removable. All edges of the film are fixed in the profile.

The procedure ends with the installation of a plastic molding around the perimeter of the room. This decorative element can be selected in specialized hardware stores.

Chandelier for plastic canvas

It is important to consider how to install a chandelier on a stretch ceiling. There are several options for carrying out this process. Even before installing the canvas in baguettes, it is necessary to prepare a platform for lighting fixture.

If a chandelier hook is already provided in the ceiling, it will need to be lengthened. In this case, the distance from the canvas to the base of the ceiling is taken into account. The hook will need to be reinforced. For this, steel chains are used.

If there is no hook at the base of the ceiling, a special platform should be prepared. This takes into account the weight of the lighting fixture. If it's small, light chandelier, you can make two glazing beads on which the platform will be attached. A lighting device will be mounted to it.

It may be necessary to consider the technology of how to install a chandelier on a stretch ceiling that weighs a lot. In this case, the platform should be installed not on two, but on four supports. The platform should not reach a few centimeters for the surface of the canvas.

Chandelier installation

To install a chandelier on a plastic stretch ceiling, you need to perform a number of manipulations. It should be noted that the film can deform and break under the weight of the lighting fixture. To prevent this from happening, when installing a PVC sheet, you will need to perform a few simple steps.

You need to purchase special protective plastic rings. They will prevent the destruction of the material at the installation site of the chandelier. How to install luminaires in a stretch ceiling? WITH there is a certain technique.

The retaining ring must be glued to the film in the place where the mounting platform or hook is installed under the canvas. You need to wait. When the glue is dry, a round hole is cut in the center of the ring using a clerical knife. An electrical wire is pulled through it.

The chandelier is connected to the mains. Then it is attached to the prepared platform or hung on a hook. The installation site is covered with a decorative cap. If desired, you can create a system of spotlights. In this case, protective rings are also used.

Safety regulations

To install a stretch ceiling in the kitchen, in the bathroom or other rooms, you will need to use special equipment. When carrying out such work, all safety rules must be observed.

A heat gun heats air using gas. This is explosive equipment. The cylinder must be serviceable. If its service life has expired, the cannon cannot be used.

If you need to fill the cylinder, you should contact a special organization. You cannot perform such actions at a gas station.

Before starting work, it is necessary to check whether the hose is intact, whether there is any visible damage to the equipment. If a gas leak is detected, the unit will need to be returned for repair.

The heat gun creates high heat. It is strictly forbidden to direct the flow of hot air to the cylinder. Accurate implementation of operating rules gas equipment guarantees the safety of the master. If you ignore the recommendations of the equipment manufacturer, you can cause significant damage to the property, health of the master.

Fabric ceiling

Having studied the technology of mounting vinyl canvases, you should pay attention to the technology of the fabric. Such products have no seams. Their width can be up to 5 m. This makes it possible to mount seamless canvases in almost any room.

Fabric stretch ceilings are easier to install with your own hands. In this case, you do not need to use a heating gun. The room should be at normal temperature. This type of installation also presupposes the pre-installation of the profiles. Strong structures must be preferred.

The installation of profiles is carried out using the same technology as in the case of a PVC-film ceiling. First, the marking is done, and then using dowels or self-tapping screws, the guides are tightly attached to the wall.

You should start pulling the canvas from the fabric not from the corners, but from the middle of the wall. First, a kind of cross is formed from the material. The rest of the pieces are pulled from the center to the corners of the room. In this case, special blades are also used. Excess material is cut off with a sharp knife. The installation should be carried out so that no wrinkles form on the canvas.

Having considered, how stretch ceilings are installed different types, you can complete the whole process yourself. Following the recommendations of experts, you can achieve High Quality finishes. When working, they must be guided by existing rules security. Installation of cloth for beginners is easier than PVC films.

A significant role in giving the living space beauty and comfort belongs to those used in the renovation process finishing materials for the ceiling, of which there are thousands of types today.

They differ not only in the nature of the raw materials used for their production, but also in their functional properties, not to mention the price. Therefore, it is not surprising that the choice of materials for repair sometimes turns into sophisticated torture. That there is only one fastening of the stretch ceiling to the ceiling, which most people simply do not know about!

What is needed for this?

If you intend to spend this operation on your own, you will have to come to terms with the fact that you definitely will not be able to get by with standard tools. So, you need to buy a special spatula and a heat gun, without which fastening the stretch ceiling to the ceiling is simply not feasible.

However, not everything is so scary: a stepladder, a drill with a set of drills, dowels, high-quality and also a knife - are available in almost every home. In addition, we recommend that you prepare a vacuum cleaner, as well as a sufficient amount of plastic film which you will need to cover the furniture.

Getting ready

In the case when the room is residential, it is better not to start attaching the stretch ceiling to the ceiling without preliminary preparation... To do this, you need to cover all the furniture with foil (remember, we talked about it), protect the floor with wrapping paper or all the same foil, Special attention giving areas directly to the walls.

We carry out the installation of the baguette

Anything begins with the installation of a durable and lightweight frame that is attached to the perimeter of the walls of the room. In another way, it is called a baguette.

To do this, you need to know if the "native" ceiling has any irregularities. If you glued wallpaper in the room, then you may be aware of the difference in height at different ends of the room. Having finally approved the lowest point of the ceiling, we take this value as the level at which the baguette will be mounted.

Its installation is carried out using dowels. Of course, this should be done as smoothly as possible, constantly checking the level indicators.

Stretching!

And now the fun begins. First you need to carefully flatten the canvas, temporarily tucking its edges behind the baguette. To do this, use a spatula. Then the canvas is temporarily fixed with clips, which must be purchased in advance.

After that ceiling mount stretch ceiling enters the most critical phase. It is necessary to secure the canvas as accurately as possible in the corners, avoiding the formation of wrinkles. If everything is done successfully, you can start attaching the decorative strip, while trimming the excess canvas.

Having finished with this difficult and dreary business, you can start heating the entire ceiling with a heat gun. Residual wrinkles will stretch and the finish will be perfectly even.

Of course, there are other types of fastening stretch ceilings (including without using a heat gun), but all of them require deep professional knowledge and considerable experience.