Redo kitchen set master. How to update a kitchen set and its facades with your own hands: interesting ideas and useful tips

Sooner or later, any household item wears out and needs to be replaced or improved. It is the restoration of kitchen furniture that is exactly the type of repair that everyone can do with their own hands, without using expensive materials or technologies.

If your kitchen set still regularly performs its declared functions, but you began to notice that:

• the body of the furniture is still strong, meets all the necessary requirements, but appearance facades of furniture leaves much to be desired;
• individual pieces of furniture fell into disrepair from external influence- the countertop cracked and deformed, traces of hot or grease spots formed on the surface;
• the headset is simply obsolete and tired;
• you do not have the opportunity to spend money on buying a more modern kit.

This is where restoration is needed. Do-it-yourself kitchen furniture repair is a very real way out of the situation.

Restoration options

There are many ways to give old furniture elegant, updated look. Depending on your own creativity, you can create a real masterpiece of design art from an unremarkable typical bedside table. Or you can just fix it outside kitchen set. Our advice will help you in the realization of your ideas, regardless of their degree of complexity.

Self-adhesive film

simple and inexpensive option repair. Applicable in the case when you want to quickly and inexpensively update the appearance of furniture facades. To date, dozens of self-adhesive options of different quality, colors, according to different price. Vinyl films on a self-adhesive basis are durable, resistant to moisture and temperature extremes, they do not lose their color and do not fade. In order for the film to evenly and efficiently cover the surface of your furniture, first remove the facades, remove the fittings and degrease the surface. After laying the boards on a horizontal plane, carefully remove protective layer while spreading the film with a hand or a spatula. Air bubbles that have appeared can be removed by carefully piercing them with a thin metal needle.

If you didn’t manage to stick the film correctly the first time, don’t use the damaged piece anymore. With repeated use, the connection of the material with the surface will be even worse, and your furniture will take on a sloppy, sloppy look. A photo of a kitchen set restored with a self-adhesive film can be seen in the selection.

Interior stickers

Perhaps, The best way to restore small, local furniture defects. You can choose stickers of various sizes and content. Restaurant-themed drawings are suitable for decorating a kitchen set - bright fruits, berries, sweets or beautiful dishes. Such stickers are a kind of self-adhesive film, but a reduced size. The principle of application is the same - remove the protective layer and carefully straighten it on the fat-free surface of the furniture. If necessary, drawings can be easily removed using special alcohol-based degreasers.

Decoupage

Decoupage is the most creative way fix up the old kitchen furniture with your own hands. The decoupage technique originates in Germany in the 15th century. Although the name of this method is French and literally means "cut". This is the basic principle of the process - we cut out pictures and apply them to the surface. You can decouple everything that has a sufficient plane. It can be dishes, clothes, books, decor items or, as in our case, kitchen furniture. Making such decorations is not difficult even for a beginner. You need to choose the base to your liking. These can be pictures from magazines, photographs, paper napkins. Kitchen cabinets decorated with old newspapers look very original. Apply a little special decoupage glue to the facade and distribute the cutouts as you wish. After complete solidification (about 8 hours), the surface must be varnished.

An interesting solution would be decoupage kitchen table clippings from culinary publications. Then, drinking your evening tea, you will not only rest, but also spend time with benefit, learning new secrets of the art of cooking. A photo of a kitchen decorated using decoupage technique is presented below.

Wall mural

If you have chosen this option of restoring kitchen furniture at home, take seriously the choice of photo wallpaper for furniture. Don't forget that the kitchen is the place high humidity and constant temperature fluctuations. Thus, materials for the restoration of old furniture must be wear-resistant, moisture resistant, and not emit any harmful fumes under the influence of hot air. Under such criteria, photo wallpapers on vinyl backing with an additional protective layer. No need to choose wallpaper with a silky or linen texture for a kitchen set. Such materials can quickly absorb odors and wear out when constant contact. It is better to decorate the kitchen with wallpaper with a smooth surface - it will be easier to care for them.

If your set is located in a room with low ceilings, use wallpaper with an elongated silhouette in furniture decor, for example, with towers, tall trees or flowers on long stems. All this will help to visually increase the height of the room.

Installing a new countertop

The countertop is one of the most frequently used elements of kitchen furniture. It is on it that we cut food, beat off meat, here we put heavy dishes or kitchen appliances. In general, the countertop is exactly the piece of furniture that we cannot do without. Of course, not every material is capable of experiencing such a strong load for a long time. Therefore, in order to return functionality and beauty to our work surface, we update the countertop. This can be done in several ways:

• decorating with ceramic tiles - clean well wooden surface, with help grinder eliminate all irregularities and defects. After that, apply special glue and lay out the mosaic. The type and thickness of the tiles depend on your preferences, but the laying method should be the same - very tightly, leaving minimal gaps. After the glue dries and the surfaces grab “tightly” (this will take at least 6 hours), grout the joints. If desired, you can varnish on top - this will add additional attractiveness and serve as a protective layer;
• glass and fillers are an option for extraordinary, creative people who try to make every centimeter of space original and different. Gently stick a few wooden slats placed on edge. Thus, divide the area into several sectors. Fill the "pockets" with fillers. Coins, beads, pebbles, shells or other small objects of the same shape can act as a filler. Lay tempered impact-resistant glass on top of all this beauty. Fix or glue it - the original table is ready without special costs. Photos of countertops with filler can be viewed in the selection with examples;
• painting and varnishing is the easiest and most familiar way for most of us to repair an old countertop. Remove the remaining varnish from the furniture with sandpaper, degrease and cover the entire surface acrylic paint. To give it simple process a little variety - apply paint using stencils. They can be purchased at any hardware store. After the drawing dries - open with varnish. If you want to leave a wooden thing in its natural, natural shade, use a stain.

Facade replacement

Replacing the facade of furniture is a way for those who are not satisfied with the restoration of kitchen furniture facades on their own. Factory furniture often has interchangeable elements. Therefore, it will not be difficult to pick up new facades in a furniture warehouse. The main thing is to correctly measure the old furniture designs. If you did not find suitable products for sale, you will have to place an order individually.

Although this repair method is the most expensive, it is still several times less than the cost of a new kit. By updating the facades of furniture in this way, you will get an almost new kitchen set, saving money.

Man is designed in such a way that he needs to periodically update the environment. If finances allow, this can be done by buying new furniture. But if the family budget does not allow such expenses, then simply update the facade of the old headset with a self-adhesive film.

With its help, you can give furniture a new look and eliminate defects that appear during its operation.

V Lately self-adhesive film for various furniture is becoming more and more popular.

To give furniture an unforgettable look, you need to choose the right self-adhesive decorative film. Modern industry offers various options this material. From cheap polypropylene and polyethylene models to practical PVC linings.

Each potential buyer can count on a variety of textures and colors.

Strength and durability, maximum safety in use, a variety of design options can be noted.

In addition to the material that forms the basis of the film for furniture, you need to pay attention to the presence of a protective layer. In the kitchen, such a layer is important to protect against high temperatures and high humidity. If self-adhesive film is used for pasting children's cabinets and tables, then the protective layer also plays an important role.

It will help protect the furniture from the careless handling of the child.

If direct sunlight falls on the headset, then cover it with a lining that has a layer that protects against ultraviolet radiation. Available for purchase today transparent models with this layer.

He, without hiding the facades, will protect them from fading.

The presence of a protective layer adds to this material additional cost. But, you can't do without it. If you are going to use the cladding in the bathroom, be sure to make sure that it has high degree moisture resistance.

The coating can be matte or glossy, imitate various materials.

Pasting of objects located near heaters, stoves and other similar devices is carried out using a self-adhesive film based on a thermally stable polymer.

The modern assortment is distinguished by an amazing variety, so you are sure to find suitable option for yourself.

The decorative layer can be made to look like stone, ceramics, fabric and wood. For furniture, “wooden” cladding or marbled material is suitable. Recently, photo wallpapers have become popular.

Especially if they are used for pasting wardrobes.

In addition to furniture, old doors, glass and even walls are suitable for processing with such material. Surfaces glued in this way can be easily washed.

Even a material that does not have moisture protection easily tolerates short-term contact with a wet sponge.

How to glue furniture with self-adhesive film

One of the advantages of this material is the ability to work with it yourself. No need to look for specialists and pay for the service. You yourself can easily cope with this task.

You can successfully use self-adhesive film to protect the table, window sill in any room, countertops and furniture in the kitchen.

by the most milestone facade processing is preliminary preparation surfaces.

After cleaning the surface of contamination, it must be degreased. Thanks to this procedure, wrinkles can be avoided during pasting.

As a means for degreasing the surface, any detergents or alkaline solution.

After preparing the surface, we proceed to cutting the material. Sheets need to be cut with a margin. This makes them easier to stick to the surface. If you need to take into account the pattern, then a margin of 2-3 cm is required. Without it, it will not be possible to accurately adjust the pattern. Excess pieces are carefully cut off after pasting the furniture.

For the convenience of cutting the material on its reverse side, manufacturers print a centimeter scale (grid).

Sticking a self-adhesive film is not difficult.

If it was not possible to exclude bubbles, they are easily removed by piercing the lining with a thin needle. After gluing, the puncture site will not be visible.

Nuances that may appear when using a self-adhesive film

Pasting flat surfaces will not cause problems for those who are faced with such work for the first time. Difficulty can arise when pasting corners. And here you can use the trick.

To make it easier to bend the corners of the sheets, you need to take an ordinary hand-held hair dryer and heat the material with it.

It also causes difficulty for a person who first encounters a self-adhesive film, drawing up sheets of material. In order not to form a gap, the sheets must be glued so that the next sheet overlaps the previous one by 1.5 cm. Then we apply the ruler to the central part of the allowance along the entire length. And on it, with the help of a sharp knife, we make an incision.

We remove the unnecessary strip. The joint will be perfect.

When working with this material, lighting is important. If it is not enough, then it is easy not to notice minor flaws. They will become visible against the general background or in bright light.

With the help of a film, you can create unique interior and decorative solutions.

If you purchased a self-adhesive film that adheres too quickly to the surface and is difficult to work with, use powder or talcum powder.

Sprinkle the surface with powder over the entire area and you will have no difficulty in fitting the sheets.

How to remove self-adhesive film from furniture

Sometimes the problem is the removal of old cladding from furniture. If the material is of high quality, then removing it will not be difficult. But, if you are unlucky, and it is very difficult to remove, then heat the surface. Use the same hair dryer.

Warm up the material with it, and it will be removed without much difficulty.

Adhesive tape- it's inexpensive modern material, which will help update the appearance of furniture and protect it from moisture and ultraviolet radiation. It's not hard to stick it on. The main thing is to do everything carefully and follow the tips described in this article.

Now you know how to ennoble and protect furniture and various surfaces with a self-adhesive film.

VIDEO: How to stick a film on the table with your own hands.

How to update a closet? If you have a wardrobe in your apartment that has lost its original appearance, but which you would like to update, then you can do it yourself with minimal financial costs. You can update the facade of the cabinet, repaint the entire cabinet in a different color or paste over it with self-adhesive film.

Decorating a cabinet with ceramic tiles looks spectacular and stylish, but is only possible when the doors are securely fastened.

An old kitchen cabinet or cabinets can be updated with leftover wallpaper, film left over from paint repairs, or other affordable and inexpensive ways.

How to update a cabinet with self-adhesive film?

One of the easiest ways to update a kitchen cabinet is to cover it with self-adhesive film. You can choose the material with the coloring of wood, marble, a natural stone or skin.

This look will give the kitchen cabinet original look. Vinyl film is impervious to moisture, resistant to temperature extremes and mechanical damage is durable and has a long service life.

Materials and tools:

• self-adhesive film;
• scissors;
• sharp knife;
• scraper;
• roulette.

Finishing lockers with self-adhesive film is a simple and functional solution, the film is quickly applied and has moisture-proof properties.

First you need to measure the kitchen cabinet, its facades, sides, drawers. To do this, the doors can be removed and placed on a flat plane. Then you need to remove handles and other fittings from the cabinet. After that, you need to clean the surface of dirt with a damp sponge.

Grease stains must be removed especially carefully. After cleaning, the surface should be perfectly even and smooth. Irregularities and deformations can be eliminated with sandpaper. If the surface is uneven, then after gluing the film may move away and wrinkle. After cleaning the surface, it must be dried.

You may be interested in: Concrete and fake diamond: countertops

Then, on the back of the film, you need to put the dimensions of the cabinet parts. 1-2 cm are added to the main dimensions for a margin. Where the film will be bent, you need to add 2 cm. If the film has a pattern, you need to arrange the parts so that the pattern matches.

After completing the patterns, the material is cut with a sharp knife and a ruler. Bends are cut with scissors.

Stickers on individual sections of the facades will refresh the interior of the kitchen.

Then they begin to paste over the facade of the cabinet with a self-adhesive film. Peel off small plot protective paper from the film, it is glued to the surface. A plastic scraper smoothes the material, removing wrinkles and air bubbles. Details are glued gradually, removing paper cover With reverse side films of 10 cm and straightening the material with a scraper.

If in some places unevenness nevertheless appeared, then in this area the film must be peeled off and glued again. The film is finally glued after a few hours. During this time, all irregularities and deformations can be eliminated.

Then the side parts of the cabinet, drawers and shelves are pasted over with a film. After that, you need to replace the cabinet handles with new ones. Replace other accessories. Then the updated cabinet parts are installed in place.

If you need to update not the entire facade of the cabinet, but only its individual parts, then you can make vinyl stickers. These stickers are made from quality material, they are quite durable and practical, wash well and do not require frequent cleaning.

Back to index

Renovation of cabinets by replacing facades

Materials and tools:

• cabinet fronts;
• screws;
• screwdriver;
• loops;
• drill.

A variety of facades for a kitchen set gives scope for imagination.

You can replace old facades with new ones. They can be ordered from furniture makers. Facades can be made of inexpensive wood, plastic or chipboard.

You may be interested in: Countertop for the kitchen: how to choose the right one?

Finished facades can be installed with your own hands. First you need to remove the old doors by removing the hinges and unscrewing all the screws with a screwdriver.

In finished doors, you need to drill holes for the hinges. Then the cupboard doors must be attached to their place with screws.

Back to index

Update kitchen cabinets with molding and staining

Materials and tools:

• decorative strips;
• drill;
• glue;
• saw;
• screwdriver;
• pens;
• deck paint;
• marker;
• spray gun.

The use of molding will give simple doors nobility and style.

Refresh the design of kitchen cabinets with paint and stickers decorative elements(molding). As a molding, small strips with a section in the form of a semicircle are used.

Before removing the facades, you need to make notes with a marker, so that later you can install all the elements correctly. Then you need to clean the entire surface with a damp sponge. Then the parts need to be dried.

Painting is best done outdoors, as paints and varnishes are toxic. Facades must be laid on a surface prepared for work.

Then, using a saw, cut out the necessary details of the molding. The edges of the planks are cut at an angle of 45 degrees. Molding is glued to the doors.

After that, mark the installation sites for handles and screws. The drill makes the necessary holes.

Painting a cabinet with subsequent screen painting is for the creative and the daring.

Then the surface is primed. The primer is applied with a spray gun. After applying the primer, you need to wait an hour for it to dry completely.

Then the surface is painted. To do this, the spray gun is filled with deck paint and applied to the surface from a distance of 15 cm. Then, the necessary stencils are taken to create an ornament or patterns. If, after the paint has dried, deformations remain, you need to paint the surface again.

Then install the facades in their place. Screw the screws with a screwdriver to the places marked with a marker.

You may be interested in: How to make a folding table?

After that, new handles and fittings are screwed on.

Long-term use of the kitchen sooner or later makes itself felt: no matter how high-quality the set is, over time it loses its experienced appearance. And then you have to choose: buy a new set or update the kitchen with minimal cost. Many stop at the second option, namely, they update the facades with a special film.

Kitchen up to:

Kitchen in an intermediate state: buy a new one or update the facades?

On the right, traces of glue are visible - the consequences of an attempt to repair the headset.

Options for "upgrade"

Since the headset itself is not yet falling apart, it is necessary to update the facades. This will benefit both the appearance and protect the material from moisture. There are two options for updating facades:

1. Finished self-adhesive film
2. Custom photo printing on adhesive paper

The owner of this kitchen settled on the second option, after which he indulged in thinking about the topic of photo printing. The original version with a separate picture for each door was rejected: general form it will be too garish. After some more thought, it was decided to choose a print with nature, the "breaking" of which with an apron will not affect the perception of the picture.

When looking for a suitable print, the picture should be chosen with the maximum resolution - only in this case it will not be blurry.

Getting Started

The owner of the kitchen took advantage of quite simple method: searched for pictures with the word "nature" with a resolution of at least 40 megapixels.

This option turned out to be the most suitable, but with minor amendments: it was decided to remove the huge butterfly. This is how the print should have looked in the kitchen.

A sketch was made in the photo editing program, for a clear understanding of what would be lost from the drawing. Butterfly has been replaced with grass.

With this picture, you can safely go to an advertising agency. The print was chosen with lamination, so that after the renovation of the facades they can be washed.

It is necessary to print in a slightly enlarged size so that it is possible to glue the ends and wrap the film inside.

After that, you can proceed directly to pasting the facades:

1. Knowing the dimensions of the door, it is necessary to throw 1-2 cm on each side for the ends and another 1-2 cm for the inversion.
2. Cut the image to the desired size.
3. We degrease the door and remove all irregularities.
4. Carefully stick and smooth.
5. We make holes for the handles and install them.

Use a hair dryer like you would with a car wrap it is forbidden: the film is deformed.

The most hard part- corners of the door. You can paste them in two ways, here it is already a matter of taste:

1. butt
2. overlap

The corners should be pasted over with the utmost care, since the self-adhesive film will not adhere to superglue.

During the renovation of the kitchen, it was decided to unload the shelf for drying plates from the covers accumulated there by hanging them on the doors from the back. To do this, you need to purchase ordinary hooks and secure them with any convenient way.

To prevent the self-tapping screws from being visible under the film, the holes for their installation must first be countersunk, i.e. make holes for them to sink.

The final stage of updating the headset was the doors under hob which were not originally present. The doors were made of 5 mm. plywood. With a special desire, you can assemble a complete set of plywood with your own hands.

Defects in pasting can be removed with a blade, but for this you need to wait 1-2 weeks: then the film will finally take its place.

The refrigerator can be the heaviest item to wrap. Get ready for the fact that the film will have to be repeatedly removed and pasted again, fortunately, it allows this. Getting rid of small bubbles is very problematic, so it is better to expel excess air after the process is completed with a needle.

Conclusions and prices

A few conclusions from the renovation of the facades:

• The film can be washed and rubbed.
• It stays on very well and is very hard to remove.
• Door corners are the weakest points.
• The film scratches easily.

The cost of such a renovation of the kitchen was as follows: about $120 for a self-adhesive print with lamination and about $90 for plywood, hooks and handles. When buying a regular film, the budget can be reduced significantly.

Photo

Now we offer to look at a few more photos with updating the facades of the headset at minimal cost.

Video

If you decide to update the kitchen with self-adhesives, do not be too lazy to watch the video on its sticker. This will save you both time and nerves.

Photo: vk.com, yaplakal.com, liveinternet.ru

It's time to freshen up the atmosphere in the kitchen, but the purchase of new kitchen furniture is not yet included in the family budget? How to update a kitchen set at minimal cost? Professional designers and decorators in such cases are advised to replace the old countertop and facades with new ones, repaint the "familiar" facades in a different color or paste them with self-adhesive film, and also update the fittings. The most interesting thing is that you can do a light facelift of old kitchen furniture with your own hands using simple tools at hand.

There are ways that can change a boring kitchen set almost beyond recognition.

How to update a kitchen set: self-adhesive film

The easiest way to transform old kitchen furniture is to paste over it with self-adhesive film. Cheap and cheerful! Choosing a high-quality film with imitation wood, marble, tile, genuine leather or stone, you can give your kitchen, if not exclusive, then a very worthy appearance. Waterproofness of vinyl film, its resistance to high temperatures and mechanical influences will retain for a long time pristine beauty your design impulse. If you know how to handle a centimeter and scissors, you should not have any particular difficulties with a film facelift. The main thing you need is accuracy and patience.

Necessary materials:

• adhesive tape
• centimeter
• ruler
• sharp scissors
• stationery knife
• plastic scraper for smoothing

The easiest way to transform old kitchen furniture is to paste over it with self-adhesive film.

Step-by-step instruction:

Step 1: We measure kitchen cabinets: facades, sides, drawers. For better quality and convenient operation Facades should preferably be removed and laid on a flat surface.

Step 2: Remove handles and other fittings. With a damp sponge, carefully wash all cabinets and drawers, Special attention focusing on removing grease stains. There should be no traces of grease, dust and other contaminants on the surfaces to be glued. It should be perfectly even, clean, dry and smooth. Otherwise, during operation in problem areas the film will begin to bubble and move away from the surface. After wet cleaning, be sure to wipe all cabinets dry.

Step 3: A centimeter grid is applied on the protective paper layer on the back of the self-adhesive, which greatly facilitates cutting and cutting the film. Celebrating required dimensions every detail. If all measurements are taken accurately, it is still desirable to leave a margin of 1-2 cm. In places where there will be bends, add 2 cm. If you have chosen a film with a repeating pattern, follow the front side so that the rapports of the pattern match.

Step 4: Cut out with a utility knife along the ruler. We cut out curvilinear patterns with sharp scissors according to preliminary marking with a marker or pencil.

Kitchen set, pasted over with self-adhesive film with graceful pattern, immediately acquires an exquisite and unusual view

Step 5: After peeling off a couple of centimeters of protective paper, apply the film to the facade with the adhesive side. Smooth the glued area with a plastic scraper to remove air bubbles and other irregularities from under the film. We glue the film not at once with the whole layer, but gradually removing the protective paper by 5-10 centimeters and carefully smoothing each passed section with a scraper. Do not hurry! Any bumps and irregularities will be especially striking on a plain surface, but on a colorful ornament they are less noticeable. We smooth the film from the center to the edges. Small air bubbles under the film can be pierced with a thin sewing needle, and large ones are cut with a sharp knife and smooth the film.

If the film is uneven during gluing, do not panic! It's not the end of the world yet. The matter is fixable! The self-adhesive film will take several hours to fully adhere, so you have plenty of time to remove the film from the failed area and apply it again.

Step 6: We do similar operations with all the other facades of the kitchen set, as well as shelves and drawers. For a complete transformation in quality final touch we change furniture fittings, in particular handles, but new ones and return the facades to their places.

If you just need to add a couple bright accents, refresh the interior with new colors and nuances, just use the interior vinyl stickers. They can be applied to any furniture with smooth facades, they are made of durable material, so they perfectly tolerate wet cleaning and do not require careful maintenance.

Most radical way renovation of the kitchen set - replace old facades with new ones

How to update old kitchen furniture: replacing facades

Need a radical budget overhaul? Replace old facades with new ones! This is not only the most radical, but also the most expensive way to update old kitchen furniture, but it will still cost much less than buying a new kitchen set. If you have a modular kitchen or a model that is still popular, it will not be difficult to purchase ready-made facades. For exclusive and out-of-fashion models of kitchen sets, you will have to make facades according to custom order, the benefit of firms providing such services abound today. When ordering a facade, you can choose for your kitchen not only original design, but also optimal material in relation to "price-quality". Economy options: inexpensive wood (usually pine), chipboard, plastic. A more solid new thing: facades made of MDF and solid wood.

For exclusive and out-of-fashion models of kitchen sets, it will be necessary to produce facades on an individual order.

Installation of new kitchen facades can be entrusted to specialists who will certainly be found in the same company that was engaged in their manufacture, or you can install them yourself. To do this, remove the old doors by unscrewing the screws and fixing hinges. Finished drawer doors and fronts are usually sold unfinished in stores, so you'll need to finish them off with a standard 35mm hole drill. Having drilled new holes for the hinges, we fasten the doors to the walls with screws. Ready! modern furniture assembles easily and quickly. Anyone who has ever had to deal with home repairs will successfully cope with the installation of new facades.

How to update the facades of a kitchen set: molding and painting

Renovating the facades of old kitchen furniture with molding and painting is simple and effective method

A great way to quickly and easily redesign old kitchen furniture is to use molding and painting. What is molding? These are decorative overlays that are widely used for decoration. various surfaces and structures such as walls and ceilings. Take a look around! Surely all sorts of moldings are present in your interior. To decorate the facades of the kitchen set, we need thin semicircular planks.

Necessary materials:

• glue for wood
• decorative semicircular molding
• Miter saw
• spray gun HVLP
• glossy deck paint
• drill
• furniture fittings
• screwdriver
• marker

Step-by-step instruction:

Step 1: Preparing the facades. Before removing the facades, we make appropriate digital marks on each door and cabinet so that we don’t confuse anything during installation and return everything to its place. We dismantle facades, remove fittings and fasteners. Carefully remove all dirt with a damp cloth. We dry the facades with a dry cloth. Since we will be using paints and varnishes, it is desirable to carry out work not indoors, but outdoors in a well-ventilated covered place, for example, under a canopy. work surface we cover it with a film and lay the prepared facades on it.

Step 2: Installation decorative molding. Using a miter saw, we cut the decorative molding into segments of the desired length. We cut the outer edges at an angle of 45 degrees. We glue the finished planks to the facade, “planting” them on wood glue.

Step 2: Installing the decorative molding is a simple but delicate operation.

Step 3: With a marker, we outline the places for installing fittings and fasteners. We drill holes with a drill or puncher.

Step 4: Surface primer. We fill the paint tank in the spray gun with a primer. We apply the primer from a distance of 15-20 cm. We wait about an hour until it dries completely.

Step 4: Priming the surface before applying paint

Step 5: Painting. When the primer is completely dry, fill the spray gun with deck paint. We carry out painting in the same way as a primer at a distance of 15-20 cm. To create an original pattern or ornament on the surface, you can use special stencils. If, after the final coat of paint has dried, bumps and other flaws are noticeable on the surface, we apply another coat of paint for a flawless result.

Step 5: Painting is done in any convenient way - with a brush, roller or spray

Step 6: Installation of facades. Not a trace of the old facades remains! Guess what to put where. It's good that we took care of this in advance. Focusing on the digital designations on the facades and cabinets, we return each door to its original place, using screws and a screwdriver. We install new fittings and admire the creation own hands!

How to update an old kitchen set with your own hands: decorative inserts

After a kitchen renovation, your old kitchen set does not fit into the new environment? No problem! The matter is fixable! Refresh the design of old kitchen furniture will help resonate with the interior of the kitchen decorative inserts from wallpaper, self-adhesive film, ceramic tiles or rattan.

Unusual way renovation of the kitchen set - the use of ceramic tiles as a decor

We decorate kitchen furniture with ceramic tiles

How to facelift an old kitchen cabinet with ceramic tiles? Easy peasy! We remove the doors of the kitchen cabinet from the hinges, thoroughly clean the surface, if desired, paint it in a suitable color. Using tile adhesive, glue the tiles to the facade. To make everything look as neat and beautiful as possible, we create a frame of decorative molding around the “tiled application”. Everything and business!

To make everything look as neat and beautiful as possible, around the “tiled application” we create a frame of decorative molding

We decorate the facades of the old kitchen with rattan inserts

Necessary materials:

• rattan cloth
• sharp scissors
• decorative wooden planks
• furniture stapler
• acrylic lacquer
• small furniture studs without caps
• sandpaper
• hammer
• brush

Kitchen facades decorated with rattan inserts immediately acquire an exotic look.

Step-by-step instruction:

Step 1: We measure the front of the doors in order to calculate how many meters of rattan fabric we need to purchase for finishing. The canvas can be bought in the form of finished rolls or cut, which will be much cheaper.

Step 2: Put a roll of rattan fabric in the bath and thoroughly moisten with cool water. Leave for about half an hour so that the material is well saturated with moisture. When wet, the rattan increases slightly in size. After installation and complete drying, the canvas is stretched like a string.

Step 3: While the rattan "reaches the desired condition", we prepare the wooden planks that we will need in order to press and attach the rattan fabric to the facades around the perimeter. The color of the frame should be in harmony with the interior of the kitchen and new finish headset.

Step 4: If necessary, the color of the planks can be changed by coating them with an acrylic lacquer of a suitable color. Apply varnish to the planks and dry. To remove roughness, fine-grained sandpaper carefully polish the painted workpiece. After sanding, apply a layer of varnish again, dry and re-sand. For a perfectly smooth surface, it is necessary to apply 3-4 layers of acrylic varnish.

Step 5: Having taken the rattan fabric out of the bath, we roll it out on an equal surface and cut it along measured standards. The doors can be completely closed with a rattan cloth, but the facades look much more interesting, on which only the middle is decorated with rattan.

Step 6: With sharp scissors, cut out blanks from the rattan fabric. Via furniture stapler attach them to kitchen fronts. We place the paper clips along the edges, then they will be closed with slats and will be invisible.

Step 7: To make the frame on the facades look beautiful neat joints, we place the slats in the miter box and file the outer edges at an angle of 45 degrees. Wet the sawn areas with a brush with acrylic varnish.

Step 8: With furniture nails without caps, we nail the planks to the facades along the edges of the rattan fabric so that they cover the paper clips.

Various types of rattan inserts designers consider effective way kitchen furniture redesign