The filling of the sliding wardrobe is 3 meters with dimensions. How to equip a wardrobe inside: ideas and useful recommendations for filling
It is difficult to imagine a modern apartment interior without a closet. It is not surprising that a 2-meter sliding wardrobe can be found in almost every home. This multifunctional furniture allows you to hide from prying eyes not only large-sized things, but also various little things.
Each hostess, equipping an apartment, seeks to create an atmosphere of comfort and family coziness. Naturally, the most scrupulous approach to furniture accessories. When choosing a wardrobe, you should pay attention to the following nuances:
- the height of ceilings in panel houses does not exceed 2.5 meters, respectively, a cabinet height of 2.1 m will be the best option;
- depending on the length of the room and its purpose, it is possible to choose furniture consisting of several sections that occupy the entire area of the wall or part of it. A budget sliding wardrobe 2 meters wide is ideal for small apartments, hallways;
- the depth should not exceed 60 cm, otherwise the furniture will seem bulky, taking up most of the free space;
- so that the shelves of the cabinet do not deform under the weight of things, their width should be no more than 1 m. In this case, shelves less than 40 cm will practically be unusable;
- in order to avoid deflection of the bar intended for outerwear (jackets, coats, sheepskin coats, fur coats), the optimal element length is within 0.8-1 meter;
- the bar in the wardrobe must be at a height of 160 cm, the bar in the shirt compartment must be at a height of 80 cm;
- the parameters of boxes for small things should ideally be within 10-30 cm in height and 40-80 cm in width.
The dimensions shown are used in the manufacture of standard furniture for mass use. With an individual order, all parameters of the cabinet can be significantly changed at the request of the client.
Corner model
A corner wardrobe can be an excellent alternative to wall-type furniture for rooms with limited space. This design, despite its compact configuration, in practice turns out to be a very capacious decorative element. The section for storing outerwear, as a rule, is located in the middle of the wardrobe and is installed directly in the corner, due to which the volume of the wardrobe compartment is significantly increased. Depending on the modification, in the corner block, in addition to the hanger bar, all kinds of boxes and shelves are provided, which in practice turn out to be very useful.
Inner space
When planning the interior space of built-in furniture, it is advisable to use the services of a professional designer. The standard filling of the sliding wardrobe provides for the storage of clothes, shoes, and other things. With the assistance of a specialist, it is possible to design additional elements, for example, a place for installing an ironing board with an iron.
Furniture manufacturers, as a rule, offer the following filling for a 2-meter sliding wardrobe:
- for maximum use of the upper space, a pantograph is built in - a bar equipped with a handle and a trigger;
- the bar for the hanger is ordinary, end (typical for corner furniture);
- for things that are not subject to deformation, hangers equipped with hooks are provided;
- hangers for accessories (scarves, ties, cufflinks, belts);
- trouser holders equipped with retractable mechanisms;
- metal (plastic) mesh baskets for underwear;
- for storing small things, multi-level pull-out baskets are provided;
- fixed mount on the wall for iron and ironing board;
- compartments for storing shoes.
The interior of the cabinet can vary significantly, depending on the needs and preferences of the client.
Facade design and decoration options
The first steps have been taken: the material has been selected, the configuration has been determined, the internal filling has been determined. It remains to decide on the design and facades. The budget option is solid facades made of chipboard. Many designers advise combining chipboard with mirror elements that visually increase the interior space of the room, hiding some construction flaws.
Designers distinguish five main options for facades:
- classic style - the facade is decorated with chipboard. One of two (three) leaves can be decorated with mirrored glass;
- the diagonal facade is characterized by the presence of metal profiles, conventionally dividing the surface into parts. In this case, the profiles are located at an angle to each other. Any option can be used as a finishing material: chipboard sheets of various shades, painted / transparent glass, mirror;
- geometric style - cabinet doors are decorated with rectangles of different heights, but the same width corresponding to the width of the sash. As in the previous version, any material can be chosen for decoration;
- the wave style is the most expensive element of the decor, since the plates are made individually. At the same time, the wave style allows you to show the creativity of the owner of the headset;
- sectoral facade - the source material is divided into tiles of a certain size and placed on the surface of the cabinet in the order indicated by the customer / designer.
Modern technologies for the production of finishing materials have advanced so much that the number of design solutions is in the thousands. Let's consider the most common:
- Chipboard is the most modest decor option. Timber board emphasizes the simplicity of the style, creating the effect of invisibility of “bulky furniture”, while the color solutions are so diverse that it is quite possible to hide the simplicity of the interior. The advantage of finishing: ease of maintenance, resistance to mechanical damage, durability;
- mirror - a 2-meter wardrobe in a small room, whose doors are decorated with mirrored glass, visually enlarges the space. Amalgam leaves an indelible impression of beauty, however, it requires constant care, since even the smallest dirt (fingerprints) is visible on the surface;
- frosted glass is a durable, translucent material. It is the effect of transparency that is not entirely appropriate for decorating cabinets in the hallway or living room. Furniture in this design is more likely to be appropriate in the bedroom, since the contents of the cabinet are partially visible through the matte surface;
- the sashes made of glass, the inner side of which is covered with colored varnish, look spectacular;
- glass surfaces with patterns / photographs. It is possible to show unlimited imagination here. The technology for the production of such surfaces allows you to give the appearance of any texture (natural wood, gloss, natural stone, relief sketch, landscape).
The most expensive decor options include natural wood trim, leather, but, as a rule, such decoration is used exclusively in the manufacture of custom-made furniture.
How to choose the right one
Before opting for a specific cabinet model, you need to make measurements of the room in which the cabinet is supposed to be placed. Having dimensions, you can safely go to the furniture salon. Here you should pay attention to the quality of the material. It is desirable if the product is made of high-strength chipboard / MDF board. In addition to strength, the material is resistant to moisture and the occurrence of fungus. The next stage is the compliance of the internal content of the selected model with personal requirements. And the final stage is the choice of design. It is noteworthy that manufacturers meet the wishes of the client and provide the opportunity to change the decor of the external panels to their liking.
For residents of small apartments, a 2 meter wide sliding wardrobe is ideal. The structure fits perfectly in any corner of the house, hiding a lot of "unnecessary" things. And, of course, by choosing the appropriate design of the cabinet surfaces, the interior will acquire special notes of home comfort.
Video
Photo
The filling in the hallway should be thought out taking into account all the features of your wardrobe. This storage system contains not only outerwear, but also often serves as a place for the constant maintenance of a vacuum cleaner, ironing board, iron or even utensils for a festive table. It is especially important to think over every detail of the closet if you live in a small apartment.
What departments should be in an ideal storage system?
Today you can buy a ready-made wardrobe with the filling provided by the manufacturer, or you can think over and fill the storage system with those types and rods that will be convenient for you, based on your lifestyle. Another factor affecting the interior layout of the wardrobe is the area of the corridor. If there is enough space in your apartment to put a spacious storage system, then there is nothing to worry about, but if the hallway is not large enough, then you can create additional space for storing things by choosing a corner wardrobe or adding a mezzanine to the standard wardrobe.
Before you sit down and start drawing the layout of your ideal closet, you need to think about what compartments you will need in it.
Compartment for household appliances
This compartment is usually done in the middle of the cabinet. It should be deep and wide enough to fit a model of your vacuum cleaner or any other household appliance that you are used to using all the time, but it is not intended for the eyes of strangers.
Mezzanine for storing blankets and pillows
It is usually located above the appliance compartment. These bedding is stowed away on the top bins of the closet before the cold season or guests arrive, and will not need to be pulled out frequently. The width and capacity of the compartment for household appliances will be harmoniously continued on the upper tier of the cabinet and will solve the problem with storing oversized textiles.
Storage compartment for ironing board
Many people often face such a problem as storing an ironing board. They try to store it on the balcony (where it can be quite dusty), under the bed (which complicates the cleaning process), in the bathroom (the size of the bathroom does not always allow it). If the depth of your wardrobe is sufficient to fit a board into it, then make a small compartment of a suitable size next to the compartment for household appliances. And above it you can make a small shelf for the iron.
Storing suitcases, backpacks and travel bags
This compartment can be placed at the bottom if the overall size of the compartment allows you that luxury, but often such things are stored on the uppermost, long roomy shelves.
Outerwear compartment
It is advisable that, in addition to the wardrobe, there are also open hangers for outerwear in your hallway. In the cold season, the weather is changeable, often the bright sun is replaced by pouring rain, or you can be caught by snow outside. It is better not to hang wet clothes in a closed wardrobe, so as not to stain other things and ruin the furniture. Depending on how long the outer garment you are wearing, the bar height will be selected. If the cabinet is deep enough, then it is better to choose retractable rods. This way, you save space, increase storage functionality and create extra convenience for yourself.
Compartment for bags, wallets, duffel bag and wallet
Depending on how many different bags you have for your daily use, you should consider where to store them. It will be convenient if bags and shoes are located in the same compartment, but shoes are at the bottom, and bags at the top. To store bags, deep shelves, pull-out baskets, a bar with hooks, where you can hang all the bags, can come up.
Housekeeper
As a rule, the first thing each of us does when entering our apartment is to put the bag in place and put the keys. Then he takes off his shoes and only after that takes off his outer clothing. Therefore, it is recommended that the first compartment of the cabinet, located from the door, be made for storing bags, shoes and place a compartment for keys in the same place. When the keys have their place, then forgetting them at home, just choosing another bag, will no longer work.
Shoe storage
Shoes are usually stored on the bottom tier of the closet. For this, pull-out shelves, metal baskets, closed shoe racks are suitable. Which option is right for you depends on the number and variety of your shoes. If the dimensions of the cabinet allow, then you can make a compartment in the form of a honeycomb, where each cell will be designed for a specific pair of shoes.
Compartment for casual wear
It is not always possible to get a wardrobe or dressing room in the bedroom, so the main part of your wardrobe can be placed in the hallway. The filling of this compartment should be carefully selected in order to create maximum convenience and comfort for yourself. For example, a pull-out hanger designed specifically for this wardrobe item can be built in to accommodate the belts. For the convenience of choosing a suitable tie, there is an additional element - a tie. To keep your trousers from wrinkling, place them on the trousers. Make sure that your scarves and hats find their rightful place too.
Storage of laundry
Pull-out closed shelves with distributors inside are suitable for storing linen.
Box for storing various small items
This drawer can store shoe polish, cleaning brush, spare hangers and other little things that are important for everyday use, but they are so difficult to keep in order.
You can store various little things in a purchased box with a lid or in a shoe box Types of sliding wardrobes. Pros and cons of each type
In order to decide on the choice of a sliding wardrobe suitable for your hallway, it is worth recalling all the existing types of this furniture, as well as thinking about the advantages and disadvantages of each type.
Table. Types of sliding wardrobes.
| Variety | Dignity | Flaws |
|---|---|---|
| Built in | Fits perfectly into any suitable space. It embodies any design idea. The ability to make on your own. | Cannot be moved to another location. |
| Semi-built | Attaches securely to the wall. Fills free niches in space. | Unable to move. |
| Case | Can be used to divide space into zones. Easily disassembled, assembled and rearranged from place to place. | There is a lot of free space that cannot be filled with things. Suitable for people with few things. |
| Angular | Using corners, expanding the usable area of the wardrobe. | Often you have to do it to order, which is more expensive than other options. |
| Straight | Versatility and simplicity. | Suitable only for the simplest set of things. You may find that the standard design is inconvenient for your wardrobe. |
| Radial | Uncommonness. Will fit into any interior and become its decoration. | Expensive and not always practical. |
| Modular | It is convenient to compose and supplement the storage system with various modules and options. | The cabinet will be limited to those modules that are in the manufacturer's collection. |
Filling straight wardrobes
The filling of the cabinet depends on what exactly you are going to fill it with, how many shelves and rods you need to keep all your things in order. The traditional filling of such cabinets is one compartment with a high bar and one compartment with shelves. In this case, you will be able to hang your coat on a hanger and put your bag on the shelf.
It is desirable that the cabinet contains not only open shelves, but also closed drawers. It will be convenient to store various small things and those things for which it is undesirable to gather dust in them.
Examples of filling 3-section cabinets Having the ability to put a storage system with three compartments in the hallway, you can differentiate them based on which things in your wardrobe are more. If you have a large collection of different pairs of shoes, then you can allocate the entire first compartment for their storage, the second compartment can be adapted for outerwear, and in the third you can place your bags. The three-section cabinet allows space for a vacuum cleaner or ironing board.
If you do not have a lot of outerwear, then only one compartment can be allocated for its storage, and it will be more convenient to make it in the middle compartment.
Example of a three-section wardrobe with two garment compartments Such filling for the storage system in the hallway will be convenient for the family. For example, the husband's outerwear will hang in the right section, and the wife's in the left section. Or, one compartment holds the clothes of both spouses, and the other compartment is dedicated to storing children's clothing.
Having the opportunity to install a four-door wardrobe, you do not have to make four different compartments inside it. Due to the free space inside the cabinet, you can make the center section more spacious by combining the second and third compartments. Or, on the contrary, to make the compartment narrow in the middle, but to increase the size of the side compartments.
Filling corner wardrobes
Corner storage systems benefit from the fact that they fill the maximum space in the room, including the corner area.
If you make the corner wardrobe deep, then it turns into a mini dressing room. It is convenient to place not only a clothes bar in it, but also open shelves, closed drawers, shoe baskets and long top shelves for storing suitcases or hats.
Inside the corner cabinet, you can store your ironing board or vacuum cleaner 
TOP 10 best manufacturers of wardrobes
| Photo | Name | Rating | Price | |
|---|---|---|---|---|
| #1 |
|
Aristo |
⭐ 100 / 100 |
|
| #2 |
|
Cideco |
⭐ 99 / 100 |
|
| #3 |
|
Komandor |
⭐ 98 / 100 |
|
| #4 |
|
RAUMPLUS |
⭐ 97 / 100 |
|
| #5 |
|
Ronicon |
⭐ 96 / 100 |
|
| #6 |
|
Ariani |
⭐ 95 / 100 |
|
| #7 |
|
Stanley |
⭐ 94 / 100 |
|
| #8 |
|
Best-Furniture |
⭐ 93 / 100 |
|
| #9 |
|
FRAN |
⭐ 92 / 100 |
|
| #10 |
|
MnogoMeb |
⭐ 91 / 100 |
|
Master Class. How to assemble and install sliding doors for a wardrobe
Let's see how the process of installing sliding doors for a built-in wardrobe is going on. In this case, the interior of the furniture has already been assembled and installed, in order to use it, you just need to install the doors.
Step 1. The first step is to buy or rent all the tools. In this case, you will need a screwdriver, an aluminum saw (a miter will be used here), a hammer drill equipped with a drill. Scissors and tape measure, drills and hexagons, etc. can come in handy.
Step 2. The first step is to install the top rail of the compartment system on the ceiling. To do this, you first need to measure the width of the opening (for example, from wall to wall).
Step 4. Now you need to drill holes in the profile for fixing it to the ceiling. There are three pairs in total, at the beginning of the profile, in the middle and at the end. But there may be more of them.
Step 5. Together with an assistant, you need to raise the profile and align it along the end of the cabinet, and then screw it with self-tapping screws. It won't be easy without the help of another person.
Step 6. Now you can proceed to the installation of the lower rail for the doors. Just like with the top rail, you need to take your measurements first.
Step 7. Again, you need to mark the desired size of the rail on the metal profile, and then saw off the section with a saw.
Step 8. Next, in the place where the rail will be mounted, you need to lay the prepared section of the profile, while not fixing it. At this stage, it is required to insert compartment doors into it and make notes on the lower rail at the places where the stoppers will be installed.
Step 9. Then, after trying on, you need to install the stoppers on the rail in the right places and then screw the lower rail to the floor or the bottom of the cabinet. The bottom rail can be fixed with double-sided tape. Then, before sticking, you must first degrease the surface, and only then glue the tape itself.
Step 10. Then the doors can be replaced. The wheels on the bottom of the doors should fit into their respective grooves.
In this case, the casters are already installed on the doors themselves. But how to fix them correctly if they were separate? There is nothing complicated here either.
Step 1. The cabinet must have special fittings. If the cabinet is made by hand, then such accessories can be bought separately in the store. It represents metal elements of various types - with and without a wheel. Those that do not have wheels are attached to the upper part of the door at a short distance from its side edge, but flush with the upper end. You need to screw the fittings with self-tapping screws.
Step 2. The second type of hardware, which has wheels, must be fixed at the bottom of the door so that the height is optimal. Each type of elements must be fastened two pieces for each sash.
Step 4. First, the sash must be brought into the far upper rail, and then, carefully lifting the door, install the wheels on the lower rail. The rest of the doors are installed in the same way, but on the near rail, etc.
Attention! Depending on the type of construction, the wheels on the doors can be located both at the bottom and at the top of the cabinet.
Calculator for calculating the width of the sash of the wardrobe door
When buying or making a wardrobe, you need to think in advance about how and with what height you are going to fill it. After all, he gained his popularity thanks to a large selection of various combinations and ready-made modules that allow him to adapt to the requirements of the owners. Correctly selected filling for wardrobes is a guarantee of functionality.
First of all, decide for what purposes you will use the cabinet, what you will store in it. The filling of the wardrobe for the hallway and for the bedroom will differ greatly; let's look at everything in order.
Conventionally, classic wardrobes can be divided into three parts:
- bottom - for storing shoes;
- middle - the main part, where the hangers and shelves are located;
- upper (mezzanine) - for storing things that are rarely used.
A wardrobe in a bedroom should have plenty of storage space for everyday, work and sleeping clothes. The depth, as a rule, is about 60 cm, which means that about 50 cm is available for storage. Thus, inside you can place both standard hanger bars and retractable ones with a release mechanism.
Popular options for filling wardrobes include the following details.
- The pantograph is a barbell with a handle and a pull-down mechanism to use the space above.
- Metal or plastic mesh baskets and shelves for laundry can store anything from shirts to socks.
- Hanging up usual or end - for a hanger.
- Clothes hangers with hooks - this is how you store things that do not wrinkle.
- Pull-out trouser holders.
- Hangers for ties, belts and cufflinks.
- Multilevel pull-out baskets - for storing small items.
- Iron holder, which is fixed to the wall. In addition, a built-in ironing board can be made.
- Shelves and niches for storing shoes.
Filling built-in wardrobes: modules used Features of the wardrobe in the hallway
A feature of the furniture in the hallway is its small width. For compact hallways in Khrushchev, a depth of 40 cm is optimal, as opposed to the standard 60 cm. Also note that 10 cm of depth is occupied by a sliding mechanism, so standard hangers will not fit into such a narrow cabinet. Here, the use of a perpendicularly located hanger is suitable, it can be both retractable and stationary. Of course, you can't hang a lot of hangers on it, but there is enough space for a small family. In a compartment with a length of 1 m, you can place two pairs of such hangers parallel to each other, in total, getting one full length. 
For storing shoes, wire shelves are used, which are fixed at an angle. Each such shelf will fit 2-3 pairs of shoes, so the main part will have to be stored in boxes on regular shelves.
In the hallway and corridor, small drawers are indispensable for storing small things: brushes, shoe polish, keys. Part of the space should be occupied by shelves for outerwear for other seasons, which you are not currently wearing. To do this, make pull-out baskets or ordinary chipboard shelves.
Models of several sections are also popular, which are complemented by hangers, corner shelves, hat holders, and seats. Take care of the required number of hooks for bags, bags and umbrellas.
A good solution is to use a mirror for the cabinet doors. It will make the hallway visually wider, and you will be able to look at yourself at full height. In addition, you can install lighting on the visor or inside the cabinet.
- The layout of the wardrobe inside must match the number of sliding doors. If you are making two doors, then it is advisable to install two vertical sections. If the doors are wide, you can make an exception by adding several compartments, but it is undesirable to put sliding doors longer than 1 meter.
- The length of the clothes bar should be sufficient, so it should be made larger than the compartment with shelves. The recommended bar length is 90 cm and the shelf length is 60 cm.
- The filling of the wardrobe should be at a convenient height for normal access inside. If you are making shelves for clothes, the opening should be 35-40 cm, and for books - 20-35 cm.
- To store short clothes on the hangers, the opening should be 80-100 cm, and for long coats - 150-160 cm. To calculate the opening for the bar more accurately, add 20 centimeters to the longest clothes.
- The upper space (mezzanine) is usually used for unnecessary large items, so make the top shelf 45-60 cm high.
- If you have a lot of clothes on the hangers, it will be more convenient to increase the depth of the closet to 70 cm.Thus, minus the thickness of the doors, you will have an optimal 60 cm.But do not make the depth too deep, otherwise it will be inconvenient to get things from the far edge of the shelves.
As the depth of the cabinet increases, access to things will become more difficult. The closet will be larger, but the clothes will have to be folded on ordinary shelves in several rows, and at the first attempt to get the right thing, everything will crumble.
Mesh drawers provide easy access to the second row of clothing and are great for storing small items.
- Your underwear and socks are best stored in a drawer.
- Fasten pull-out fillers for sliding wardrobes so that the door frame does not interfere with their movement. Drawer handles must be recessed inward.
Sliding wardrobes: internal filling When choosing drawers, pay attention to the quality and type of guide rails. They should allow the box to roll out completely so that it does not fall. Cheap roller guides will only extend halfway. The most advanced drawers have a door closer mechanism that slides it smoothly and quietly into place.
- For long shelves and bars, provide baffles to support them.
- To install the lighting inside the cabinet, use a retractable visor, which will automatically turn on when the door is opened.
Corner wardrobes
Corner cabinet inside Separately, it is worth talking about the filling of corner wardrobes, an example of which you see in the photo. They have different shapes: triangle, trapezoid, diagonal patterns.
If you decide to make the wardrobe in a corner, the filling will be more difficult, because you need to provide easy access to things in the corner. A good way to make good use of corner space is to center multiple hanger bars. An example of their attachment is shown in the photo.
Most often, the place in the corner is occupied by clothes hangers, but there are options with the location of the shelves.
Open shelves for souvenirs can be made in the corners.
Features of filling built-in wardrobes
If you decide on your own, interior content can be more practical. You make the most of the free space from floor to ceiling, fill the empty niches. For example, many people prefer to organize a place for a TV or computer. To do this, either create an additional open module, or put it inside, hiding it with doors.
Content examples
With the help of a visual diagram, where the filling of the wardrobe is visible, you can see examples of combining different components. Of course, they are all conditional, select the best ideas for yourself and create something of your own.
Options for two doors 
Option for three doors 
Option for 4-door wardrobe
A sliding wardrobe is a great solution for a house or apartment. This modern furniture solves the problem of placing clothes, shoes and other things. But, before making or buying a sliding wardrobe with shelves, you need to figure out in advance how and how to fill its internal space. It's no secret that this type of furniture gained popularity precisely because there is a large selection of combinations and ready-made modules. A huge number of things can be placed inside. The products are practical, spacious and comfortable. The filling of the wardrobe can be done according to the needs of the owners. And if the shelves and drawers are positioned correctly, then the functionality of the product rises to the highest level.
In this article, we will consider the filling of sliding wardrobes with photos with dimensions, accessories for a sliding wardrobe and an arrangement for a bedroom or a corridor. First, you need to decide for what purpose you are buying or creating a structure, and what exactly will be stored inside. And if the filling in the bedroom is one, then in the hallway it will be completely different.
Filling for the wardrobe in the bedroom
Before examining the wardrobe in the bedroom, its contents and photos, let's conditionally divide it into three parts. When creating, they use this principle. The classification is as follows:
- The lower part of the structure in which the shoes can be stored.
- The middle part that serves as the main one. It contains hangers, shelves and drawers.
- The upper part, or as it is also called - mezzanine. It stores things that are rarely used or seasonal.
Each part plays an important role. But, depending on the purposes of the wardrobe, the location and size of the drawers may vary. For example, if you install a wardrobe for a bedroom, then it should have enough space to store everyday clothes, overalls or bedding. This is the main purpose of the products in the bedroom. For example, the depth of the structure can be about 60 cm. Therefore, about 50 cm will be available for full storage of things. This is quite enough. The size allows you to fit inside a regular hanger bar, or a retractable trigger mechanism.
If we talk about filling the wardrobe, then basically the structure contains the following elements:
This is not a standard, everyone decides for himself how to organize the space inside. Moreover, the budget, the needs of the family, the number of members and clothing are taken into account. The sliding wardrobe, its components and fittings can be very different. But they are all designed for one thing - to store your belongings.
Filling the product for the hallway
Quite often, these structures are located not only in the bedroom, but also in the hallway. They replace conventional hangers. This is convenient as there is even more storage space. The design replaces a whole range of other products, such as shelves for shoes, shelves for gloves and hats, clothes hangers.
The peculiarity of the wardrobe for the hallway is that it has a smaller width, since the corridors are often small. For the hallway in the Khrushchev, a width of 40 cm is sufficient. And the working space will be 30 cm. We would like to clarify that these 10 cm are reserved for sliding mechanisms. It turns out that standard hangers cannot fit in such a narrow cabinet. In this case, a perpendicularly located hanger is used, which is made both retractable and stationary. It is clear that there are not many hangers to hang on it, but there is enough space for ordinary families. If the compartment is about 1 m in size, then you can make two pairs of hangers, placing them in parallel. In total, you get the length of one full-fledged hanger.
But, the main feature of sliding wardrobes is that they must have a shelf for shoes. A shoe rack in a wardrobe can be built-in, and some do it themselves. Yet almost all wardrobes in the hallway have them. They are located at the bottom. But, this is not the law. A shoe rack can also be made on the side of the cabinet. There are a variety of options for these shelves. They are made stationary or retractable, from a wide variety of materials and a wide variety of designs. If we talk about the standard, then such shelves for the wardrobe are located in its lower part.
For the closet in the hallway, other drawers are also made of a pull-out type, in which you can store all sorts of little things and accessories. These can be brushes, shoe polish, keys, glasses, etc.
Do not forget about the shelves, which are intended for storing outerwear of other seasons, which are not worn at the moment. They should also take up part of the cabinet space. These can be pull-out baskets or chipboard shelves. It is noteworthy that some components for the wardrobe are made by hand.
Wardrobes with hangers, corner shelves, seats and hat holders are very popular. They are also complemented with hooks for bags and bags, as well as a place for umbrellas. And what closet in the hallway can do without a large mirror? This is the most important part of the design, since you can fix all the shortcomings before going out to people. Not only do the mirrored doors help the owners, they also visually expand the hallway. And if necessary, the wardrobe can be equipped with lighting inside or outside.
This is one of the options, but, as you understand, there can be many of them. It all depends on the design and your needs. But one thing always remains at the heart: a place for placing outerwear, for shoes, handbags and umbrellas. Let's also look at some additional tips for planning a wardrobe that will help organize the space in it correctly.
So, let's take a look at 10 whole tips that can be taken into account when planning a wardrobe closet:
Examples of internal content
Everything we talked about is relative things. There are no specific provisions that say where and how boxes, shelves, hangers, etc. should be placed. Methods of internal filling are quite varied. The main task is to place all things inside in order to conveniently get them back. Below is a visual diagram with options for filling this piece of furniture. Perhaps you will like some of them and you will use it to organize the space of your closet.
These options are based on the fact that the cabinet has two doors. When you open one of them, you can get access to one or another section. And here is an example of filling a product with three doors:
As you can see, it is divided into three sections. Each of them can be very different. However, it is important that when you open one of the doors, you can fully use each drawer or shelf. The same goes for the 4-door wardrobes below.
Conclusion
A sliding wardrobe is an irreplaceable thing in every home. And thanks to the correct, personal filling of its inner part, you can achieve maximum comfort of use. It is clear that the arrangement of a product for a bedroom or hallway will be different, but it is selected taking into account the needs. Therefore, using the tips from this article, you can choose or make the perfect design for yourself.
Correct filling of the wardrobe and distribution of internal compartments guarantees no inconvenience or discomfort during its operation. Depending on the location of the cabinet, the layout of the compartments may vary. So, large numbers of nets with removable shoes will become out of place in the closet located in the nursery. And pull-out glove boxes are of little use in a closet in the bedroom.
There are no specific standards and rules for interior filling, the number of shelves, the presence of mezzanines or drawers. The design of the interior space of the closet is filled depending on the quantity and type of clothing, as well as on the preferences of the owner of the room.
It is important to remember that the design of the internal layout of the filling of a wardrobe for any purpose should be based on clearly verified measurements.
Self-assembly from your own drawings often contributes to a practical distribution of space. The owner always knows better than filling an empty niche, whether to create an additional empty module for installing a television monitor, or hide it with flaps.
Depending on the location, there are several templates with modules that can be easily remodeled. Some tips for planning the interior fittings of built-in wardrobes:
- the number of leaves, as a rule, is equal to the number of compartments, with the exception of wide doors, behind which two sections can be located;
- the wardrobe module with a bar is made wider than the compartment with shelves;
- the opening of the section for storing linen in height is no more than 40 cm, which is the most convenient option, while books are allocated from 25 to 35 cm, depending on the printed edition;
- for the wardrobe, the best option is to create two compartments - for a short one, with a module height from the bottom partition to the bar 100 cm, and long clothes, with a module height of 160 cm;
- mezzanines intended for large-sized things are made at least half a meter high;
- the total depth of the cabinet, equipped with longitudinal bars, should be planned at least 65 cm, for a module with transverse bars - at least 50 cm due to the door mechanism;
- in the projects of drawers in which underwear will be stored, the dead zone must be taken into account - the frames of the compartment door mechanism, so that the drawers can slide freely
- the depth of the drawers is designed taking into account the presence of hinged handles, if any, the height of the front panels of the drawer should be at least 25 cm;
- to extend the drawers, it is advisable to use a ball-bearing mechanism, which allows them to be fully extended;
- shelves over 90 cm should be provided with a partition so that it does not bend;
- hanger bars over 120 cm long must have a design with an additional bar resting against the floor with the lower end and tied to the opposite upper shelf;
- to install baskets, shoe racks, trousers or tie-makers, it is necessary to know their dimensions in advance in order to avoid falling into the internal parameters of the compartment intended for them;
- the interior lighting of the cabinet, if this does not apply to the dressing room, it is advisable to take it to the top panel, equipping it with 12 W halogen lamps;
- for a large mezzanine, it is not advisable to make separate doors, it will fit perfectly behind the common doors;
- wardrobe compartments with bars should not be located in the outer compartments, since over time, the outer modules, overloaded with things and not connected by shelves, may fall apart.
It is important to know that the filling of the built-in wardrobes depends on the intended purpose of the structure, which differ in the internal composition of the sections.
Filling the wardrobe in the bedroom
The prevalence of large space in the projects of wardrobes for the bedroom leads to the constant storage of bed linen and bedding accessories. The wardrobe compartments, as a rule, are equipped with a pantograph - a retractable hanger bar equipped with a downward-lowering device, and a standard version of the bar. The pantograph allows you to make the most of the upper volume of the wardrobe block.
Also, the filling of the wardrobe in the bedroom consists of the following blocks, compartments and modules:
- compartment where mesh baskets are attached;
- block with the inclusion of an end or conventional hanger;
- a panel equipped with hanging hooks for removable and non-crease clothes;
- trousers-hangers and ties with a retractable mechanism;
- pull-out multi-level drawers storing small items - cufflinks, belts, handkerchiefs;
- on one of the walls, it is advisable to determine the place where the iron and the folding ironing board will be hung;
- compartments for the lower shoe blocks, as well as a compartment for home slippers.
Filling the wardrobe in the hallway
The specificity of some projects of wardrobes in the hallway lies in their non-standard dimensions. The optimal width of the built-in furniture of this plan corresponds to only 0.4 meters with the standard parameters of 0.6 m. For such narrow wardrobes, mounting of transverse rods for hanging hangers is provided.
The correct design of filling such a closet will allow you to place the maximum number of things in the closet. It is very important to have a modular block in the hallway that allows you to store seasonal clothes, as well as a separate overall section in the lower location of the shoe cabinet.
It should not be forgotten that the excessive workload of the wardrobe in the hallway with the irrational design of the sections leads to the loss of the facility's functionality.
Everyday shoes are stored on mesh shelves that are angled for better ventilation. Seasonal shoes are stored in the mezzanine or on regular shelves packed in boxes.
It is necessary to provide for all the little things, including the presence of small drawers - glove boxes, in which many necessary things are stored, which are located only in the hallway. These are shoe products and cleaning creams, shoe and clothing brushes, auxiliary shoe horns, keys.
It is advisable to include sections for long-term storage of seasonal items and clothes, as well as modules of additional shelves or large pull-out baskets in the internal design of the cabinet.
Filling the wardrobe in the nursery
To ensure the safety of the child and teach him order, the filling of the wardrobe in the nursery is selected in the most careful way.
The upper zone is temporarily reserved for the needs of adults. The lower compartments are designed so that the child has access to his personal belongings. The modules are created in such a way that as they grow up, the child can independently use the entire wardrobe.
Lifting and retractable mechanisms are selected from simple but reliable systems that cannot be disassembled by children's handles. The discomfort in using pull-out drawers in a small person should be completely absent, so that the child can freely pull them out many times, without fear that any of the mechanisms will break.
Filling the sliding wardrobe photo of the interior layout
Built-in furniture is created for a comfortable existence and rational use of the entire area of the room. The main criterion for planning the filling of the wardrobe is its location in the dwelling. We present a series of photos of the interior layout and design of cabinets for various purposes.
Variety of 3- and 2-door wardrobes for hallways:
Dressing room alternative:
- corner wardrobe
- and a five-door wardrobe
Sliding wardrobe in the nursery from the Baltic designers:
Two sliding wardrobes in the living room from Ukrainian designers:
A wardrobe in the hallway is one of the most essential pieces of furniture. What should be the correct cabinet inside? It is necessary to consider for whom and for what things you need a closet. For some, shoe shelves and a pair of hangers will be enough, someone plans to store bedding, bags and even a washing machine there.
Here, for example, everything is located not only rationally, but also with the use of unusual shelves, for example, a dynamic shelf in which any little thing can be conveniently obtained.
Correct filling of the wardrobe
There are no definite rules. The main thing is to think over everything in advance and draw a sketch. You can even make a cabinet yourself using ready-made drawings. It's important to consider the size of your hallway.
For a small family or even one person, a single-door wardrobe is suitable. But the number of sections is at least two. The cabinet should be divided into sections. It is convenient to leave your shoes here or even leave sports equipment, such a wardrobe resembles a small room, but it takes up little space.
For your convenience, the inner filling of the closet in the hallway should contain hangers, shelves for shoes, drawers for gloves, hats, mittens, possibly coasters for hats and umbrellas. If the entrance hall is spacious enough, the sliding wardrobe can replace an entire dressing room with a mirror and space for changing clothes.
The width of the shelves is at least 80-90 cm, but there is also a variant of narrow shelves (40 cm), if there is no room at all in the hallway.
For outerwear: coats, raincoats, fur coats, the height of the cabinet should not be less than 140 cm. The crossbar (it serves as a holder for hangers) is most practical not deep into the cabinet, but across.
This wardrobe contains not only convenient shelves for clothes and accessories, but also a decorative corner shelf for small items.
Practical wardrobe inside - features
There are much more filling options for two-door and three-door cabinets than for one-door. Storage items may include bedding, seasonal clothes, tablecloths, towels, magazines, and even built-in sections for jewelry and beauty supplies.
Metal cabinets are very convenient, they do not accumulate dirt and debris, moreover, they are very light, which is very important for complex structures.
The width of the shelves varies from forty centimeters and more.
The arrangement of things in the closet can be done according to a very convenient scheme:
- In the middle there are often worn things so that they are always at eye level.
- Above - rare and unnecessary, for example, hats or carnival costumes.
- The most bulky and heavy things are stored below, for example, suitcases.
Which cabinet filling should you choose?
Corner wardrobe occupies a non-standard hallway area. A corner wardrobe is a mini-dressing room; a lot of things are placed on the occupied area, especially non-standard sizes.
A straight wardrobe fits less, but it is easier to fit it into the overall interior of the hallway.
Make sure that the closet does not interfere with the passage to other rooms. The hallway should be comfortable and spacious.
Internal elements are made of a metal frame to be stronger and more reliable. Check that the doors move smoothly and without jerking.
You can put boxes in large cabinets, as in this photo, then the cabinet will look neater.
Such a cabinet is sometimes inconvenient due to the narrow frame and rather bulky structure.
Pay attention to whether the lighting is located here, sometimes the hallway light is not enough to find something, or to pick up an image.
To store men's belts and ties, as the inner filling of the cabinet, special pull-out holders or shelves with cells are used, which are mounted on the sidewalls and are very convenient to use. Shoe boxes (nets) are practical, but they should not be located close to the floor (dirt accumulates under them and it is inconvenient to clean it). The mesh width can vary from 30 cm (for a pair of shoes) to 100 cm or more.
Built-in wardrobes are quite comfortable in the hallway. The top bar fits into the ceiling. There is no free space on the sides either. Thus, the entire area is used to the maximum.
It is not very convenient to position the crossbar in the depths; outerwear does not fit much. But then the closet may not be very deep.
It is a very rational idea to put a washing machine in the hallway closet. Often in small apartments, this is the only place where it will fit.
And here the ironing board is also inscribed.
There are suitcases on top here, although here you need to make sure that they are not very heavy.
Wooden and sliding shoe racks are not always practical, because they often get dirty and sand accumulates there.
It is very convenient to store shoes in pull-out metal shelves, so it will also dry normally.
In any case, it must be remembered that the sliding wardrobe is not designed for one year. Therefore, the design of the interior space should take into account the perspective and maximum filling, as well as the features of the hallway in which it will stand.
In the latter version, both closed cabinets and open hangers are very conveniently located, where you can hang everyday clothes.
Great experience is required for competent space planning. In this article, we tried to draw your attention to the main points of the correct layout of the wardrobe.
The general the depth of the wardrobe is best done at least 65cm, since 10cm will go to the device of the door mechanism.
For shorter pieces, use 2 parallel bars on top of each other to fit more clothes.
Draw out drawers and baskets at a height of no higher than 120 cm, otherwise they will be inconvenient to use later.
Based on practice, the optimal distance between the shelves is 35-40 cm.
It is better to hang the bar at a height of 170-190cm from the floor, if you hang it higher, it will be inconvenient to get it, hang it lower - it is not optimal to waste space.
If you place 2 bars under short clothes one above the other, as we advised above, then the most optimal distance between them will be 80-100 cm.
Ideally, it is necessary to measure the length of the clothes and add about 20 cm to it (then the total height of the hangers themselves will be taken into account with the distance from the top shelf to the bar itself.
Accessories for wardrobes (shelves for shoes, hangers for ties) always contain few things, and they are not cheap.
For storing shoes, it is better to use ordinary shelves, on which shoes can be arranged in 2 rows or in boxes.
Since bulky things are usually placed on the mezzanine, its opening in height should be 45-50 centimeters.
For storing underwear provide drawers.
The height of the front panel of the drawer is 20-25 cm, but at the same time remember that the height of the drawer box is 3-5 cm less than the front one, it depends on the type of guides.
It is better to use full extension guides, because it is convenient when the inner contents of the drawer are fully extended.
And further, never make empty openings with rods in the outer compartments of the cabinet, because the side panel can simply fall off from the blows of the door. Shelves will solve this problem - they will tie the side panel of the cabinet to the entire structure.
It is worth saying that in each situation everything is individual: only you can decide how your wardrobe will look like inside, what area can be used for a wardrobe, how many shelves and what to do, but be sure to consult with a specialist.
How to order a wardrobe
Take advantage of the free consultation of our specialist. A home visit and an individual cabinet layout are carried out. You can also make an order right on the spot.
Specialist consultation
Ordering a wardrobe is just half the battle. And the latter is half the battle. And the first and most important thing is to plan how the wardrobe will look like inside. Correctly defined needs will bring satisfaction in the future when using the cabinet.
The device of the sliding wardrobe consists of:
- shelves;
- drawers;
- rods;
- mesh baskets;
This is the most minimal compulsory set that should be in any self-respecting closet. Now a little more detail.
Shelves
This is the basis of the internal structure of the wardrobe. With their help, the cabinet is zoned. Items placed on the shelves are easy to reach. Shelves-mezzanines are often ordered for the entire length of the cabinet. As a rule, things are stored there that are rarely used.
There are also pull-out shelves. With a large cabinet depth, this is very convenient. The necessary thing will be found quickly, as soon as you slide out the shelf.
Boxes
Drawers are also an indispensable element of a wardrobe. Great for storing small items. How many boxes are needed is indicated by the customer. There are options when the number of drawers, as well as their height, can be changed with the subsequent use of the cabinet.
Barbells
Outerwear is placed on rods and pantographs. The rods are made of chrome-plated metal to withstand a good load.
The pantograph creates a second floor for things when the height of the cabinet allows it. This saves space very well.
Mesh baskets
Storing things in baskets is very convenient. First, the baskets are well ventilated. And secondly, it is quite easy to find the desired item, thanks to a good view through the mesh. It can accommodate laundry, socks, sweaters and even children's toys.
Additional elements
The inner structure of the sliding wardrobe can be supplemented with such elements as a trouser or a tie. For those who like to walk in a suit, it is very important that the trousers are not wrinkled. The trouser woman will help to save the situation.
But you can quickly choose a tie using a tie. Your attention will be presented to the entire stock of the tie models you have. Some manufacturers offer tie holders with special lighting. To make it easier to decide if this tie fits your shirt and jacket.
A separate hanger is also provided for the belts. If not available, the belts can be stored rolled up.
If the depth of the cabinet is small, a cross hanger is suitable for storing a large number of things. The clothes will run parallel to the wall, which will save space.
Also, the wardrobe inside can become a refuge for many, many objects. For example, with the help of a special mount, the vacuum cleaner hose will perfectly fit here.
To use the capabilities of the internal structure of the wardrobe to the maximum, do not rush to choose the standard option. Think for yourself, consult with the designer, apply non-standard solutions. And then the whole world will fit inside your closet. The world of your favorite things.
Happy device!
Optimal planning and rational use of space is the key to comfort. The arrangement of furniture in the room is a key factor in this.
Thanks to the individual design, the sliding wardrobe can organically "fit" into places that were previously considered oversized.
But just buying a wardrobe is not enough. It is necessary that it not only serve as "furniture", but become a functional item and help organize the necessary things. To do this, you need to know how to plan a wardrobe inside.
You can easily arrange things of different lengths in it, and numerous shelves will help you freely place other little things.
First you need to decide on the location of the cabinet. It is this fact that will decide how it will look in the end: its depth, height, width, filling.
Be careful with the choice of the door extension mechanism - it should not be too noisy.
For a more specific representation of the location of furniture, you can limit the place at hand to the place that is intended for installation. So you can estimate the occupied space in the room and adjust the dimensions of the future furniture.
The sliding wardrobe will fit into most modern styles.
If you make an overview of all the components of the wardrobe, then you can outline the main components:
- Base (bottom base);
- System (base or "support", it includes sliding devices - wheels, rails);
- Furniture panels (walls, ceiling, floor);
- Doors (may have, the principle of operation is sliding);
- False panel (located in the part where it is better to hide the voids);
- A frame or a rod (located parallel to the door, or perpendicularly, a trempel is hung on them).
Regarding the internal content, here the components are known to everyone - drawers, shelves, compartments. They can be combined to achieve the desired results.
For example, if a wardrobe is chosen for a bedroom, then there are some classic components that are present in almost every version:
Shelves. Their number may vary depending on the needs, they can be located in any part of it;
This also applies to the distance between them.
Drawers. Usually located at the bottom, depending on the purpose, they have different depths and quantities;
Drawers are usually used as a chest of drawers.
Barbells. For large sizes, one or more rods can be installed, which are used to hang clothes.
The bar can be for short clothes (blouses, jackets, skirts) and for long ones (coats, raincoats, dresses).
If the filling of the cabinet is planned for the hallway and dressing room, then the composition will not be radically different. The only thing that may differ is the number of constituent elements, depending on the purpose of the wardrobe. The lack of rods or drawers is most likely offset by the many shelves and storage compartments.
A variety of "fillings" can be selected based on personal needs.
When choosing the arrangement of the elements, it is also worth considering which family member will use them. For example, if a child is given personal space for clothes and things, then it must be placed in a place accessible for his growth. The compartment for this can be planned as follows: at the bottom there is a pull-out drawer, a shelf and a rod for trempels. When planning space for adults' belongings, consider whether there will be storage for items other than clothing (blankets, sheets, pillows, shoe boxes, etc.).
This will make the necessary layout of the wardrobe obvious.
What sizes to choose
To determine the dimensions and choose the optimal filling of the cabinet, it is better to immediately take into account the factors that will become decisive when choosing.
- Depth
If we talk about size, then everything is purely individual here. But there are also standards that are often used. It's about depth. As a rule, it is 60 cm.
If we take into account the door system here, then it increases by another 5 cm.
But what if this option is not suitable? There is custom-made furniture to meet all the needs of the customer in terms of depth, width, height of the product and even the pattern on the doors. If you wish, you can order a structure with a depth of 40 cm and it will optimally "fit" into the interior.
For example, it is suitable for a corridor in which outerwear is hung and shoes are stored.
- Height
The layout of the wardrobe inside with dimensions should be adjusted as much as possible for all household members. It is worth considering, first of all, growth and the ability to use a ladder or chair in order to reach the highest point.
Upstairs are stored rarely used and seasonal items, bags and suitcases, shoe boxes.
Usually even hard-to-reach places are occupied with things that are rarely used in everyday life. For the sake of practicality, many purchase a cabinet in the ceiling.
In this case, it will not be necessary to constantly shake off the settled dust from there.
- Width
According to this criterion, there can be no rules, because the width is chosen purely from the characteristics of the room, the number of accommodated things, where it will be located and the wishes of the homeowners.
The wider the furniture is, the more sections can be there.
Putting the closet in a corner, if it dictates the space of the room, is not difficult. You only need to know the width of one and the second part. If the shape resembles the letter "P", then, knowing the width of all parts, you can create a well-planned structure.
The number and width of sliding doors will depend on this.
Do not overestimate your size capabilities. If there is no need for a large wardrobe and there are no plans to purchase a large number of things, then you should buy a piece of furniture that is more modest in size.
It is advisable to place small wardrobes in small hallways - standard products simply will not fit there, blocking the passage.
And vice versa - for a large amount of things, they initially consider buying a large-sized version so that everything fits and finds its place.
It is quite possible to place a large wardrobe in a spacious living room or bedroom.
Sliding wardrobe: how to plan correctly
For structures that will be located in different parts of the room, it is necessary to select your own individual internal component. Let's take a closer look at the basic configurations that are offered for different indoor locations.
- Bedroom
Although the presumptive presence of elements has already been described above, it will not be superfluous to clarify a lot.
Thanks to the correctly selected filling, such a wardrobe is able to accommodate almost your entire wardrobe.
The usual filling of the wardrobe in the bedroom must meet the following requirements:
- Availability of space for folding bedding (shelves);
- Storage of underwear (drawers with divisions);
- Hanging clothes for everyday use (a bar with trembles, where it can be in two levels for clothes of different lengths);
- Storage of accessories (drawers with divisions or shelves);
- Household "necessities" (ironing board, iron, steamer, hair clipper and much more will fit in compartments between departments or in a special place designated for this).
It can easily fit not only your belongings, but also bed linen, additional sets of pillows and blankets, and even an ironing board.
- Hallway
Since the hallways in different houses and apartments have different shapes, widths and lengths, you need to select furniture according to these features. The wardrobe system has a sliding door type, it will suit almost any type of hallway.
Here it is already worth starting from the depth of the cabinet.
The hallway needs space for the following things:
- Outerwear (barbell);
- Shoes (shelves, pull-out systems with storage space);
- Accessories (shelves, drawers);
Placement of the mirror on one door or two will be appropriate.
A sliding wardrobe in the hallway is indispensable for storing clothes for each of the seasons and numerous shoes.
- Wardrobe
How to plan a wardrobe inside for a dressing room? There is already more room for imagination, because you can have anything in the dressing room in the quantities that the dimensions allow.
Thoughtful organization of space and storage of things will undoubtedly play into your hands.
You can put in the "compartment":
- All types of clothing, from underwear to fur coats or jackets (retractable structures with divisions and rods are used);
- All kinds of accessories from earrings to travel bags and suitcases (pull-out top shelves about 50 cm wide);
- Shoes (racks and holders);
- Hats (shelves);
- Household items (shelves, pull-out systems).
The number of shelves, sections and the size of the furniture depend on the volume of the interior space.
Installation
All components are manufactured both according to standard design and to order. The first option may immediately fall into the right place, or it may require an individual approach. Then the wardrobe will be made according to the wishes of the client.
It is better to choose a mirror surface as a facade decor, at least for one of the doors.
After using the wardrobe for some time, the layout inside may not meet the comfort standards of an individual family. Then you can modernize the existing filling of the cabinet by adding or removing some elements. To carry out the installation, it is enough to have the necessary accessories and a screwdriver. As a last resort, you can call a specialist.
For installation, special fittings are used - for elements that can be pulled out, doors, mounting rods, lighting, and more.
