Installation of acrylic bath malta bas. Bath tubs

The well-known company Bas has gained wide popularity due to the use of two modern technologies for reinforcing the surfaces of bathtubs. The first option is based on reinforcing the bass tub with polyester resin and special glass fiber. The second technology involves the use of absolutely safe, environmentally friendly high-density two-component polyurethane foam.

Modern bathtubs

Currently full the lineup companies represent:

bass acrylic tubs;
curtains for them;
shower cubicles;
special shower enclosures.

30 modern models have a classic rectangular, asymmetric and symmetrical shape. All products are manufactured in strict accordance with advanced Italian and American technologies using original equipment.

Any Bass bath is molded using special vacuum forming machines manufactured by the well-known Italian company SELF. During the operation of such equipment, infrared heating of certain zones is used. This method allows you to bend the base sheet into any desired shape.

Popular Bass Models

To date, the bass acrylic bath is the best option in terms of price-durability for many citizens of our country. The most famous models are considered to be all corner baths, artsy curved shape to save space and enhance appearance rooms.

Let's dwell on three unique models that will satisfy any requirements of the most fastidious users:

Bass bath Laguna - the maximum volume of water up to the protective drain at the top is 295 liters. The depth of the side asymmetric model in the center is 44 cm, and the height of the screen itself is 55 cm. Electrical characteristics this bath V - 220/240. Wiring for power electronic elements produced by RCD. The standard package includes:

metal carcass;
front panel;
convenient removable legs for installation of a bathtub and a drain device.

Additionally, this model is equipped with: a cascade, safety handles, special jets for a relaxing massage of the back and legs, a headrest, lighting and a pillow for the switch button.

Bath Bas Alegra - this model has a smaller volume. Only 220 liters. But it fits perfectly into small bathrooms in "Khrushchev". The maximum center depth is 45 cm and the screen height is 56 cm. The classic equipment is the same as the previous model, with the same additions: headrest, handles, jets, cascade, button pad and backlight. This bathtub is very practical and easy to use, popular with young couples who can easily climb over a fairly high rim. Low price perfectly combined with high functionality. This brainchild of Bass is a new generation acrylic bathtub with a comfortable corner seat made of durable materials.
Acrylic bath Bass Nicole - enough. In addition to the shape and volume, this model is no different from the previous one. The maximum volume is 290 liters. It is easy to install in the space between two walls or in a small niche, which are still found in former communal apartments. This is possible thanks to two straight sides on both sides of the product. The bed has a rectangular shape, slightly elongated on one side. If necessary, this bath can be equipped with a vertical hydromassage stand and a special original curtain for this model.

Please note: the power supply to all models is carried out through the RCD, so it is imperative to ground this device. Otherwise, the use of such a bath will be unsafe for humans.

Advantages of acrylic types of bathtubs

Recently Bass baths are gaining more and more popularity, but what are the main advantages of such devices?

Users and installers sanitary accessories note whole line advantages of such baths.

Unlike steel and cast iron counterparts, Bass acrylic bathtubs are lightweight and have very high strength, which was inaccessible to non-metal products. long time.
Even unfilled with boiling water, they have a temperature that is pleasant for a person and does not allow the collected water to cool for a long time. This property is available through the use of acrylic, which has a very low thermal conductivity. On average, in 30 minutes the water will cool down by only one degree Celsius.
All such models of baths have ergonomic shapes, specially created close to the curves of the human body.
The acrylic surface is highly resistant to various mechanical damages: chips, deformations and scratches.
Acrylic is able to retain its original luster for many years and does not turn yellow, as happens with enamel counterparts. In addition, they practically do not slip, which makes their use safer for children and the elderly.
The surface of such baths is covered with a special antibacterial layer that prevents the development of various diseases and fungal deposits.
The water is collected quite quietly, which allows you to take a bath even at night, without fear of disturbing your family and neighbors.

Tip: if you want to install a bathtub model with a hydromassage function, then first consider where it is most optimal to place additional equipment.

Conclusion

If it was decided to use Bass products, acrylic bathtubs will be purchased at the most reasonable price. And the number of various additional functions will turn the usual hygienic bathing into a real spa treatment.

High environmental friendliness and ergonomics of all models allows you to install and use these devices for comfortable bathing of babies and young children. They are easy to fit into any interior, thanks to the variety of shapes and convenient way installation. The only thing you should not forget about is the mandatory grounding of such baths. Do not be lazy and risk your health, relying on luck.

Gallery

Products trademark BAS is fully certified and labelled. Acrylic and whirlpool baths, shower cabins BAS have proven themselves in Russia and the CIS countries. The reason for this is the impeccable quality and acceptable price. To date, this is the best offer in terms of price / quality ratio.

BAS brand products are fully certified and labeled. Acrylic and hydromassage, shower cabins BAS perfectly proved in Russia and the CIS countries. The reason for this is the impeccable quality and reasonable price. To date, this is the best offer in terms of price / quality ratio.

All products are manufactured on Italian equipment from Sanitary Acrylic/ABS multilayer sheets. polymer material the Austrian company "Senoplast" on the Italian vacuum-forming equipment. Bathtubs and shower cabins of the famous world brands "Jacuzzi", "Teuco", "Albatros", "Villeroy&Boch" are made of the same material.

In Europe and other Western countries, BAS has long earned the trust of the consumer. Cast iron and steel baths receded into the past because they are inferior in many respects. Acrylic bathtubs are more resistant to mechanical damage, are much easier to clean and do not lose their color over the years. In addition, they are very pleasant to use, retain heat well while taking a bath.
Acrylic bathtubs BAS are different colors, which helps you choose what best fits into the design of your bathroom.

If you want more than just a bath, BAS hot tubs are available. By purchasing a hot tub, you will have a personal medical office. Hydromassage relaxes, improves blood circulation, and even improves immunity. It is used for both medicinal and cosmetic purposes. The BAS hot tub is not only useful, but also brings a lot of pleasure.

So you've decided to buy acrylic bath. Perfect solution! In this article, we will give you 5 of the most important tips to help you make right choice so that your bath gives you only pleasure and benefit for many years.

When choosing an acrylic bath, it all depends on your desires and financial capabilities. In order not to get lost in all the variety of baths that currently exist, it is worth understanding a few key points that will make your further search easier.

Tip 1: Prices vary
Like any product, acrylic bathtubs vary in price. Now on the Russian market there are a large number of manufacturers of acrylic bathtubs, offering from the cheapest to the most expensive models. The price of a bathtub is influenced by the quality, the size of the bathtub, and its design. The lower price limit for an acrylic bath is now about 8 thousand rubles. The top has practically no limit.

Tip 2: Realize your design dreams
One of the main advantages of acrylic bathtubs is the wide variety of designs. Your acrylic bathtub can be of almost any shape, from the classic rectangular to the unusual asymmetrical. This variability allows the buyer to install a bath even in the smallest room, as well as to implement any design ideas. If you are dreaming of a refined and stylish acrylic bathtub, pay attention to the design of bathtubs from Italian manufacturers.

When choosing an acrylic bath, decide what place it will take in your bathroom, the size of the bath depends on it. For a small space, an ergonomic 120×70 bath is suitable, and for a more impressive space, you can choose a more impressive size, for example, 190×120.

Tip 3: Special attention quality
When choosing a bathtub, the first thing to do is to check the availability of all certificates, and also find out what polymer the bathtub you like is made of. There are two types of polymers that are used to make acrylic bathtubs.
The first - ABS / PMMA - is a combination of two types of polymers - acrylonitrile butadiene styrene and polymethyl methacrylate, connected by coextrusion, that is, the connection of materials with different properties. The thickness of the acrylic layer in such baths is only 5-10%, everything else is an ABS polymer, which has a number of disadvantages - a relatively low density, a tendency to absorb moisture, roughness and porosity of the structure. Such baths are usually cheaper, but be prepared for the imminent appearance of microcracks, chips, loss of appearance. The service life of such bathtubs is only 3 years.

The second type of material is 100% cast homogeneous acrylic, that is, polymethyl methacrylate. Bathtubs made of such a polymer have all the qualities necessary for a bathtub - wear resistance, high strength, good appearance, maintainability. The service life of bathtubs made of homogeneous cast acrylic can be 10 years.

How can I tell the difference between a 100% molded solid acrylic bathtub and an ABS/PMMA bathtub? Look at the side of the bathtub. If the bathtub is made of homogeneous acrylic, there should be only two layers - acrylic and resin. Bathtubs made of ABS/PMMA have three layers - a thin layer of acrylic, a large layer ABS plastic and a third layer of reinforcement. So if the bathtub has a cut thickness of more than 8 mm, and the seller tells you that acrylic is 6-8 mm thick here, then it is most likely that he is disingenuous. Acrylic as such is 1 mm here, followed by a layer of plastic - ABS.

The quality characteristics of an acrylic bathtub, which you should pay attention to, also include its rigidity and shape stability. These qualities are given to the acrylic bathtub by the reinforcement procedure that the bathtub is subjected to during manufacture. The reinforcing layer consists of fiberglass and epoxy resin. And the process of reinforcement, respectively, is the application of such a layer to the bath. The more layers, the stronger the bath. The number of layers with which the bath was strengthened at the factory is easy to determine by carefully examining the edge of the side. The layers are clearly visible, like annual rings on wood. Therefore, the walls of the bath should not sag, this must be checked when choosing a bath.

Obviously, the better the quality, the higher the price. Compromise allows you to find baths Polish manufacturers which offer very reasonable value for money.

Tip 4: Tuning for your bath
For an acrylic bath, you can purchase additional equipment. It includes faucets, a system for hydromassage, decorative panels, end/front curtains, headrests, handles, mats, etc.

Of all the above to necessary equipment, which will definitely need to be purchased with the bathroom, is a mixer. And here is another advantage of an acrylic bathtub - the faucet can be placed on the side of the bathtub in any place where it will be more convenient for you. And you can even make several mixers. Acrylic bathtub allows you to realize all your ideas.
Faucets, like all plumbing fixtures, vary in price and quality. Choosing, for example, Italian manufacturers, you can be sure that the money paid is not in vain. Take it cheaper, made in China - it's up to you, but don't expect a long service life.

Tip 5: Buy a bath without leaving home
Now there are many places where you can buy an acrylic bath: plumbing stores and salons, construction markets, specialized shopping centers. But all this requires a lot of time, effort and nerves. Recently, it has become possible to purchase acrylic bathtubs on the Internet. It is much more convenient and profitable. You can choose the option that suits you in terms of price and design, which will be delivered to you directly at the specified address.

BAS BATH OPERATION

Thank you for purchasing a BAS bathtub. Whirlpool baths "BAS" are modern technologies and original lines that provide the comfort of hydromassage, which will strengthen your health and give you many pleasant minutes. This manual describes the functions of the baths, installation requirements, care and use.

ATTENTION:

In order for the bath to bring you benefits, to work for a long time and reliably, a number of conditions must be met:
If your body has malfunctions of cardio-vascular system, then consult a doctor (how much hydromassage is useful for you).
Consider installing filters (for water purification) - this will increase the life of your faucets and whirlpool bath equipment.
Do not turn on the hydromassage without filling the tub with water.

TECHNICAL DESCRIPTION

Hot tub standard equipment:
Acrylic bathtub - hydromassage - 1 pc.
Acrylic panel - 1 pc.
Drain - overflow device - 1 pc.
Legs - 3 - 5 pcs. (depending on the model).
Panel clamp - 4 pcs.
Self-tapping screws for fastening the acrylic panel - 1 or 4 pcs. (depending on the model).
TRANSPORTATION OF BATHTUBS

When transporting and installing the bath, care must be taken not to damage the piping systems and electrical equipment. DO NOT carry bath by piping or jets.
INSTRUCTIONS FOR PREPARING THE PLACE FOR INSTALLING THE BATH:
A plumber performing work on the removal of pipes for hot and cold water, must take into account the linear dimensions of the bathroom. Otherwise, the pipe outlets may abut against the stiffeners, aggregates and fittings of the bath. This means that the bath cannot be installed close to the walls.
The drain pipe of the bathroom should not rise more than 10 cm above the floor. If this is not possible, then a podium must be made.
The legs serve to level the bathtub, so under load-bearing structure bathtubs need to install additional stops.
Wiring must have multiple open contact access insulation at least 3mm thick. System protection should be based on differential (multiple) tripping (1 fn =30 mA). The supply cable must comply with EU standards or be of type H07 RN-F, according to VDE 0250. Near the bathtub and in a place protected from water (recommended minimum height from the floor 25 cm), a socket with (make sure that the earth cable is correctly set). Bathtubs are delivered ready for connection to the mains. Never interchange the installed terminals.

ELECTRICAL SYSTEM

The installation of the electrical system must be carried out by a professional electrician. must have a differential switch 3 0mA, magnetothermo 2.4 - 4A, and another common connection(CEI 64-8). If it does not exist, install one in the common shield of the apartment.

DO NOT INSTALL UNDER THE BATH.

How to connect hot tubs to the mains:
Yellow-green wire - grounding;
Brown wire - phase;
Blue wire - 0.
V
220/240Hz
50 W
0.7 – 0,9
depending on bath model

HYDROMASSAGE EQUIPMENT

BATH CARE

For daily bath cleaning, use a liquid cleaner and a cotton cloth. soft tissue. To maintain the shine of the bath, you can wipe with a cloth with a polishing agent. Stubborn stains in the bath can be removed with the usual products used in everyday life for washing smooth surfaces. To wash the bath, use only soft cloth napkins.

Scale deposits on the surface are removed with a soft cloth moistened with lemon juice or wine vinegar.

Surface scratches or burn marks from cigarettes can be removed by lightly sanding fine sandpaper (No. 1000/2000) with water. You can restore the shine of the surface with a liquid polishing agent.
CLEANING THE BATH HYDRAULIC SYSTEM

This type of cleaning is carried out using hard water (over 15 salt deposits per cubic meter of water). It is recommended to clean the bath water system twice a year as follows:
Fill up the bath hot water(40 C).
Pour in liquid detergent at the rate of 2 g per 1 liter of water and start hydromassage installation for about 5 minutes.
After that, turn off the electric pump and drain the water from the bath.
Refill the bath cold water and turn on the hydromassage for 2 minutes.
Drain and clean the tub (see "Washing the tub").

IMPORTANT NOTE

WARNING: Never use metal brushes or tools, solvents or detergents with abrasive additives to remove dirt from the surface of the hot tub. Also avoid getting ammonia or chlorine on the brass and chrome parts of the tub.

HOW TO USE THE WHITE BATH

Never turn on the hot tub until the water reaches a level 5-6 cm above the opening of the jets. Never use the bathroom after taking alcohol or medicine. Hydromassage in medicinal purposes can only be carried out on the advice of a doctor who will select the appropriate duration of sessions and water temperature for you.

Taking a cold bath improves your health. A warm or slightly hot bath relieves tension. To relax muscles and relieve pain, take a bath (up to 40 C). The first hydromassage session, which should be carried out only in warm water, should last no more than 10 minutes. The effect of water jet massage is directly proportional to the temperature of the water and the duration of the session. After taking a bath for too long, you may feel tired. And if you feel sleepy while taking a bath, turn off the hydromassage device for a while and cool the water.

Overweight people are contraindicated in hot tubs with a water temperature exceeding 38 C.

Before turning on the whirlpool system, make sure that the jet nozzles are not pointing upwards.
SIMPLE FAULTS, THEIR POSSIBLE CAUSES AND REMEDIES

Fault occurring	Possible reason	Remedy
	No mains voltage	Call a specialist (electrician)
Hydraulic pump does not turn on	The plastic tube connecting the button and the pump jumped off the hydromassage button	Attach the plastic tube to the base of the button and restart the system
	Jet nozzles closed	Turn counterclockwise to open the nozzles
Hydraulic pump works but no water comes out of jets	Clogged piping system	See paragraph "Care of the bathroom"
Increased vibration in the operation of the hydraulic pump	Loose motor mount metal frame baths	Tighten engine mounting bolts

Processed

The advantage of acrylic bathtubs is their lightness, but this moment is also their disadvantage, since a rather fragile and thin construction may not withstand and burst upon impact or be damaged by a heavy object falling.

Agree, I don't want to spoil new plumbing when performing installation. In general, installing an acrylic bathroom with your own hands is an easy task. The main thing is to understand the principle of work and adhere to technology.

Below are various ways installation of the bath, the procedure for connecting the siphon and sewer supply is described. All instructions are accompanied by visual photos and videos.

Acrylic bathtubs are very beautiful, have original design and varied color solutions. At the same time they have their weak sides and vulnerabilities.

Therefore, it will not be superfluous to find out what problems you may encounter during installation and subsequent operation, and how to prevent them.

Colored acrylic bath of an unusual shape will become a bright and original element that can decorate the interior of any bathroom.

Among the advantages are:

Plastic. Acrylic lends itself well to molding and subsequent processing. This property of the material determines the presence of a huge variety of forms of acrylic bowls.
Lightness. The acrylic bathtub is lightweight (15-25 kg), so one adult man can easily handle its installation.
Priority heating technology. Acrylic itself is warm material. In addition, it has low thermal conductivity, acrylic bathtubs are able to retain heat for a long time, the water in them cools down much more slowly than in cast iron structures.
maintainability. Plumbing and acrylic products in general lend themselves well to repair and restoration. If the damage is significant, then you can restore the bath using an acrylic liner, which is made for a specific design, and then simply inserted into the old container.

As for the shortcomings, they are also present. We must not forget about the disadvantages. Following the guidelines below will help you avoid possible problems and extend the life of the acrylic bath.

The disadvantages of acrylic plumbing include:

sensitivity to high tº. Acrylic does not hold up very well high temperature. When heated above 60 degrees, it can be deformed, so you should not pour too hot water into the bath.
Fragility. If you accidentally drop a heavy metal object into the bathtub, a step like uneven surface, its bottom can be pierced through.
Vulnerability. Acrylic bathtub is capricious in - it cannot be rubbed with hard brushes, washed with powders containing abrasives, since the enamel is very susceptible and can be easily scratched from exposure to solid particles.

And it should also be noted, if not a drawback, then the inconvenience that the one who first sank into an acrylic bathtub faces. Due to the thinness of the material, the bottom may sag slightly under the weight of a person. However, you get used to this feature of an acrylic bath quite quickly.

Image gallery

Conclusions and useful video on the topic

The assembly of the frame and the installation of a bathtub with a plastic screen are described in the following video:

Video instruction on how to properly assemble a factory metal frame for an acrylic bath:

Acrylic bathtubs of angular, round or asymmetrical shape are installed only on the factory metal frame. Manufacturers attach detailed instructions, according to which any man can cope with this work on his own. However, it is better to entrust the installation of a hydromassage bathtub to specialists, since it requires the connection of complex electrical equipment.

Have something to add or have questions about installing a bathtub? Share personal experience installation of plumbing and please leave comments on the publication.

OPERATION OF BATHS "BAS"

Thank you for purchasing a BAS bathtub. Hydromassage bathtubs "BAS" are modern technologies and original lines that provide the comfort of hydromassage, which will strengthen your health and give you many pleasant minutes.

This manual describes the functions of the baths, installation requirements, care and use.

PRECAUTIONS

In order for the bath to bring you benefits, to work for a long time and reliably, a number of conditions must be met:

1. If your body has disorders of the cardiovascular system, then consult a doctor (how much hydromassage is useful for you).

2. Consider installing filters (for water purification) - this will increase the life of your faucets and hydromassage bath equipment.

3. Do not turn on the hydromassage without filling the tub with water.

4. Do not allow the bathtub to be walled up in tiles, panels or hard mortars, restriction of access to hydromassage equipment, preventing the extension of the bath to a distance of at least 0.5 m from the wall.

5. The bath is connected to a single-phase alternating current with a voltage of 220V. To avoid defeat electric shock, the bath must be earthed through a socket with a connected earthing contact.

TECHNICAL DESCRIPTION AND EQUIPMENT

Standard equipment of bathtubs is shown in the following table

№n/n	Type of components	Picking lists and quantity, pcs
№n/n	Type of components	A	B	C	D	E	F	G
1	Acrylic bathtub (framework, top panel clamps and additional equipment)	1	1	1	1	1	1	1
2	Bath piping (drain-overflow) with siphon \ without siphon	1	1	1	1	1	1	1
3	Threaded stud M12	4	6	6	8	7	5	7
4	Leg PVC bathtubs M12	4	6	6	8	7	5	7
5	Panel fixing bracket	2	2	3	2	2	2	4
6	Decorative clip (with press washer)	4	4	6	4	4	6	8
7	Washer M12x36x3.4	4	4	6	4	4	4	8
8	Nut M12	12	16	18	20	18	14	22
9	Mounting screw 4.2x25	4	4	6	4	4	6	8
10	Manual	1	1	1	1	1	1	1

Equipment list A- for baths of the models "CAMERON", "LIMA", "TESSA", "VERONA", "IBIZA", "BREEZE", "ALEGRA", "VECTRA", "MALDIVE", "STYLE", "SAGRA", "ATLANTA" ", "NEPTUNE", "MALTA", "AKHIN", "FLORIDA", "FANTASY";

Equipment list B- for bathtubs of the INDICA, JAMAICA, LAGUNA models;
Equipment list C- for bathtubs of the CAPRI models;

Equipment list D- for bathtubs of the FIESTA models;

Equipment list E- for bathtubs of the NICOLE models;

Equipment list F- for bathtubs of the models "RIOLA", "KHATIVA", "IRIS", "IMPERIAL", "MEGA", "FIREWOOD";

Equipment list G- for bathtubs of the RIVIERA models;

Additional equipment includes: hydromassage, back massage, Shiatsu massage, air massage, lighting, chromotherapy, control panel, mortise mixers and handles.

Depending on the bathtub model, the manufacturer provides panels (screens) for bathtubs (front, side), shower curtains and headrests, which are not additional equipment and are not included in the kit. The manufacturing company reserves the right to make changes to the design and equipment of bathtubs.

TRANSPORTATION OF BATHTUBS

The bath must only be transported in a horizontal position. When transporting and installing the bath, care must be taken not to damage the piping systems and electrical equipment. Bath should be moved only for the body or frame. Must be avoided mechanical damage bath body, panels, as well as to exclude the possibility of exposure to chemically active reagents on the surface of the product. During transportation in the cold season, before installation, the bath must be kept at room temperature for at least 6 hours.

ATTENTION! It is strictly forbidden to move the bath by pipelines, nozzles, handles and other equipment! Inspect the goods for compliance with the order, the absence of mechanical damage, completeness, the availability of accompanying and warranty documentation.

REQUIREMENTS FOR THE INSTALLATION OF THE BATH

The room in which the bath is installed must meet the following requirements:

Tiling and finishing work to be completed;

The possibility of easy access to the components and assemblies of the bath for its preventive warranty maintenance and repair should be provided;

The presence of a power line with the required parameters and a socket with a connected ground contact. The power supply of the bathtub connection point must be provided by a double-insulated electric cable with a cross section of at least 2.5 mm2 and is in accordance with the norms and standards of the EU;

Availability of water supply and sewerage. Sewage pipe the bathroom should not rise above the floor at the connection point by more than 10 cm. If this is not possible, then a podium must be provided under the bath;

BATH INSTALLATION REQUIREMENTS

The installation of the bathtub must be carried out only by qualified specialists, in compliance with the following requirements:

Installation of a bathtub without a frame, as well as with a modified frame, is not allowed. Legs are used to level the bathtub and to adjust the gap between the bathtub panel and the floor. The bath must rest on all points of support in order to exclude uneven distribution of the load and, as a result, the appearance of microcracks in the bath body;

The bathtub must not be walled up in tiles, panels or hard mortars. To prevent moisture from getting under the bathtub or on the hydromassage equipment, the seams between the bathtub and the wall must be sealed with sanitary silicone.

Avoid dirt and construction dust on the surface of the bath. This can cause clogging and failure of the whirlpool equipment or lead to scratches on the surface of the tub, during subsequent unprofessional cleaning.

When performing work on the withdrawal of water supply and sewage pipes, it is necessary to take into account the linear dimensions of the bath. Otherwise, the connection may be difficult, since the pipe outlets may abut against the stiffeners, aggregates and fittings of the bath, and the bath cannot be installed close to the walls. Structural changes in the arrangement of equipment and pipelines of the bath, cutting of mounting clamps, and so on are strictly prohibited.

The electrical wiring of the room must have an individual differential switch 30mA, a magnetothermo 2.4-4A or another common connection (CEI-64-8) and installed in the common switchboard of the room. It is strictly forbidden to install the specified knife switch under the bathtub!

ATTENTION! Failure or incomplete fulfillment of the above requirements does not provide for the preservation of the warranty conditions for service or repair for such a bath.

BATH INSTALLATION

Install the bathtub on legs (Fig. 1) The manufacturer allows the legs to be equipped with an M12 bolt, instead of the corresponding threaded studs. Equipment legs BUT(fig. 1) (2 pcs.) - are installed on the front (front) side of the bath, along the edges, on the left and right (for the bath " RIVIERA"- 4 pieces, all in front). Equipment legs B(Fig. 1) - other remaining front and rear legs. The legs are attached to the frame with the upper pair of M12 nuts, which also serve to adjust the height of the bathtub.

Install a drain-overflow device (Fig. 2), a siphon (may not be included in the kit) on the bathtub, and adjust the height of the bathtub. The distance from the floor level to the lowest point of the siphon must be at least 15 mm. Make sure the bathtub is adjusted and rests on all points of support.

Install the panel onto the bathtub by snapping it onto the top fixings (fig. 6 and 7). On some models of symmetrical and asymmetric bathtubs "BAS" it is possible to cut the panels along the length (no more than 2 cm per side). In addition, if you plan to install a side panel on your bathtub, then first install the top fasteners under it that come with the side panel in the kit. Adjust the verticality of the panel. The bottom of the panel should be adjacent to the plane of the corner, installed on the extreme legs. Depth of landing of a corner is regulated by the bottom pair of nuts M12. The corners must be equally adjusted to each other in height, and be symmetrical with respect to the panel.

Using a 3.5 mm drill (the size is indicated for a 4.2x25 mm self-tapping screw), drill in the lower corners and panels through holes(Fig. 4 and 5).

Remove the panel from the bathtub and connect it to the sewerage and water supply systems (see Connecting the bathtub to the water supply and sewerage network), as well as to electrical network 220 V (see Connecting the bath to the electrical network). After that, carefully push the bath firmly against the wall, and once again make sure that it is stable on all points of support, and all connections are made correctly.

6. Install the panel on the bathtub and fix its bottom in drilled holes self-tapping screw with a press washer (Fig. 8).

7. Close the head of the self-tapping screw with a decorative cap (Fig. 9).

ATTENTION! IN ORDER TO AVOID MOISTURE GETTING OUT OF THE BATH, PRODUCE MANDATORY PROCESSING OF THE SEAMS WITH SANITARY SILICONE AROUND THE ENTIRE PERIMETER OF THE BATH!

CONNECTING THE BATH TO THE WATER SUPPLY AND SEWER NETWORK

The connection of the bath to the water supply and sewerage network must be carried out by a qualified plumber.

The bath kit includes a semi-automatic drain device, which, after its installation on the bath, is connected to the sewer network permanently, through a flexible corrugated or rigid PVC pipe (not included in the kit). sewer drain with a diameter of 40-50 mm is displayed at the installation site of the bath in the floor or wall, taking into account the linear dimensions of the bath. When the drain pipe is located in the wall optimal height a distance of no more than 2 cm from the floor level to the lower edge of the pipe is considered.

Connecting the bath to the water supply network if it is equipped with a mortise mixer. The pressure in the network should be 3-5 atm. At pressures above 5 atm., pressure reducers should be installed and adjusted to the specified standards.

Places for connection to the water supply system should be placed taking into account the linear dimensions of the bath and its units and equipped with taps that are disconnected from the main line. Connection to the system is carried out through a flexible plumbing connection (water hoses). The length of the hoses must allow the bathtub to be moved away from the walls, and the distance must not be less than 0.5 m. Recommended use of water filters. The absence of filters can lead to clogging of the whirlpool jets and the ingress of metal scale into the ceramic cartridge of the mixer, which will lead to their failure.

ATTENTION! Mortise mixers are completed with a set of flexible eyeliners of a standard sample. If the length of the flexible hose is not enough to connect to the system or connect between the elements of the mixer, then it is purchased separately, taking into account your dimensions for connection. The bathtub manufacturer is not responsible for the nature of the set of in-line faucets, for damage to the elements of the hydromassage system caused by their contamination when using unfiltered water containing rust, sand, chemically active impurities, as well as for breakdowns or incorrect operation of the bath equipment connected to the system. water supply with non-standard pressure in it.

Leave the tub unattended while filling it with water. Overfilling the bathtub with water can lead to failure of the air massage system, without preserving the warranty conditions for the operation of the product.

Rotate the drain-overflow cover around its axis or with a load on the bath plug.

CONNECTING THE BATH TO THE ELECTRIC NETWORK

The electrical equipment of the bath is powered from a single-phase alternating current network, in accordance with the table below.

Function	Voltage, V	Frequency, Hz	Power, kWt*
Hydromassage	220/240	50	0,9-1,5
Air massage	220/240	50	0,7-0,9

*power is indicated depending on the bathtub model

The connection of the bath to the electrical network must be carried out by a qualified specialist with the 3rd and higher tolerance group. How to connect hot tubs to the network:

Yellow-green wire - "ground";

Brown wire - "phase";

Blue wire - "zero";

The bath must only be connected to a separate residual current circuit breaker (RCD) with a rating of 30 mA and located outside the bathroom.

It is allowed to connect the bathtub to a 220 V network. In this case, they are purchased separately and installed independently. Each unit of equipment intended for connection to the network must have an individual connection to the electrical network.

Connect the units together, in one plug, etc.

Use a bathtub with a socket or plug without a good grounding contact.

Ground the bath through heating, plumbing and sewer equipment.

Operating the bath with a damaged power cord, or with a faulty or unconnected ground.

Carry out technical work with the bath connected to the network.

HYDROMASSAGE AND OPTIONAL EQUIPMENT

The bath can be located the following elements hydromassage equipment (see View BUT):

Email Hydromassage motor with hydraulic pump

Air massage compressor

bathroom controls and knobs

hydromassage nozzles (jets) (reverse side)

piping system

Additionally, the bath can be installed

air massage (installed in the bottom of the bath, see Fig. 1)

Mortise mixer (see fig. 2)

Back massage (see pic 3)

Shiatsu massage (back massage or back massage + foot massage) (see Fig. 4)

Chromotherapy (see figure 5)

Backlight (See Figure 6)

Head restraints (see fig. 8)

BATH CONTROL

The bath functions are controlled by the following equipment:

BUT) Jets (jets) for hydromassage.

Provide adjustment of the direction and strength of hydromassage jets. The direction of the jet can be easily changed by turning the nozzle nozzle within a 30 degree angle. The power of the water jet is regulated by turning the nozzle of the nozzle around its axis. The maximum jet flow is achieved by fully opening the jet nozzle counterclockwise (open nozzle).

B) Button on / off. Functions of a hydromassage with the regulator of supply of air (RPV). Provides on/off hydromassage system by pressing in the center. The RPV controls the amount of air mixed with the water jet during the operation of the hydromassage system, due to the injection process. By turning the knob, you can change the amount of air flowing with the jet of water from the hydromassage jets. The power of the jet increases with the supply of air into it.

AT) Button on / off. Aeromassage functions (chromotherapy illumination). Provides on / off aeromassage system. When switched on, the compressor pumps air under pressure through air nozzles installed at the bottom of the bath. At the same time, small air bubbles break out to the surface, massage and enrich the skin with oxygen. Can be used to turn on/off. Chromotherapy highlights.

G) Crane-balance (turbopool).

Switches the operating modes of the hydromassage system between the general hydromassage function and the back massage function (Shiatsu massage). Adjust the desired distribution of water supply by the indicated functions by turning the “flag” of the switch.

D) Electronic control panel for bath functions (No. 2).

Buttons for adjusting the power of the air massage function

Button on / off. air massage functions

Button on / off. Functions of chromotherapy (backlight)

Button on / off. Hydromassage functions

E) Electronic (touch) control panel for bath functions (No. 3).

Remote control power on/off button

Button for turning on / off the hydromassage function

On / off button for backlight / chromotherapy function

Multifunctional button for switching operating modes: radio station frequency ( MHz) / station channel number ( ch) / radio frequency tuning mode (flashing inscription TUNE) / volume control mode ( d) / air massage power level adjustment mode (number from 1-10 ). Also used as a selection confirmation button when memorizing radio stations. Up to 10 tuned channels can be stored in memory ( CH).

Mode setting buttons: volume level / radio station frequency / radio station channel number / air massage power level. The setting is carried out depending on the mode selected by button 5 ( SET).

Radio on/off button.

Button for turning on / off the air massage function.

ATTENTION! If your bathtub is equipped with a control panel, then if the water level is lower than it should be in the bath, all functions are turned off, except for radio and air massage.

HOW TO USE THE WHITE BATH

ATTENTION! Never turn on the hot tub until the water reaches a level 5-6 cm above the opening of the main whirlpool jets. Avoid high thermal impact (above 65 degrees Celsius) on the surface of the product - this can lead to its damage! It is forbidden to turn on the hydromassage function with closed jet nozzles. Before turning on the hydromassage system, make sure that the jet nozzles are not directed upwards and that the balance tap is not in the back massage (Shiatsu massage) position. During the operation of the hydromassage, it is forbidden to block the grate of the water intake valve, preventing the flow of water into it. After using the bath and draining the water, it is recommended to blow the air massage jets by turning on the air massage function for 1 minute.

Never use the bathroom after taking alcohol or medicine. Hydromassage for medicinal purposes can only be carried out on the advice of a doctor who will select the appropriate duration of sessions and water temperature for you.

Taking a cold bath strengthens your health, a warm or slightly hot bath relieves stress. To relax muscles and relieve pain, take a bath up to 40 degrees Celsius. The first hydromassage session, which should be carried out only in warm water, should last no more than 10 minutes.

The effect of water jet massage is directly proportional to the temperature of the water and the duration of the session. After taking a bath for too long, you may feel tired. And, if you feel sleepy while taking a bath, turn off the hydromassage device for a while and cool the water.

Overweight people are contraindicated in hot tubs with water temperatures exceeding 38 degrees Celsius.

BATH CARE

For daily bathing, use a liquid detergent that is harmless to acrylic and plastic surfaces (see cleaning agent instructions) and a soft cloth. The manufacturing company offers you a specialized cleaning agent "TIM-PROFI" adapted to our products. To maintain the shine of the bath, you can wipe it with a cloth with a polishing agent. To wash the bath, use only soft cloth napkins.

Deposits on the surface in the form of scale are removed with a soft cloth moistened with lemon juice or wine vinegar.

Surface scratches or burn marks from cigarettes can be removed by lightly sanding with a fine-grained sandpaper(No. 1000/2000) with water. You can restore the shine of the surface with a liquid polishing agent.

ATTENTION! Never use metal brushes or tools, solvents or detergents with abrasive additives to remove dirt from the surface of the hot tub. Also avoid contact with ammonia or chlorine on brass and chrome parts.

CLEANING THE BATH HYDRAULIC SYSTEM

This type of cleaning when using hard water (over 15 salt deposits per 1 cubic meter of water). In addition, it is recommended to clean the bath hydraulic system. Twice a year in the following way:

Fill the tub with hot water (40 degrees Celsius).

Pour in liquid detergent at the rate of 2 g per 1 liter of water and run the hydromassage system for about 5 minutes.

After that, turn off the hydraulic pump and drain the water from the bath.

Fill the tub again with cold water and turn on the hydromassage for 2 minutes.

Drain and wash the bath (see "Care of the bath").

SIMPLE FAULTS, CAUSES AND WAYS TO ELIMINATE THEM

Fault occurring	Possible reason	Remedy
Hydraulic pump does not turn on	No voltage in the power circuit (mains 220 V)	Call a specialist (electrician)
The hydromassage button (aeromassage, backlight, chromotherapy) does not turn on	The plastic tube connecting the button and the electro-pneumatic valve jumped off the function enable button	Attach the plastic tube to the base of the button and restart the system
	Jet nozzles closed	Turn counterclockwise to open the nozzles
Hydraulic pump works but no water comes out of jets	The formation of an "air lock" in the hydromassage system	Disconnect the bathtub from the 220V network, fill it with water and loosen (no more than 1 turn!) the upper nut of the hydraulic pump tee to bleed air from the system. After that, tighten the nut tightly and restart the system.
Increased vibration in the operation of the hydraulic pump	Loose fastening of the engine to the metal frame of the bath	Tighten the engine mounting bolts.

Even the most stylish interior the bathroom will look ridiculous if you do not close the space under the plumbing fixture. You can decorate it in different ways, but the screen installation is considered the best and most reliable. With it, you can not only ennoble the room, but also create a comfortable working area hidden from prying eyes. Under such panels in free space, you can place household chemicals, small buckets and other things.

What are there?

Modern manufacturers offer a wide range of products for every taste.

There are different types of protective panels:

deaf;
with sliding doors;
with doors - accordion;
with hinged doors;
with shelves.
with fabric curtain.

Which option to choose, each person decides for himself. If you want to save free space, you should choose the option with accordion doors, which fit best into small spaces. For a comfortable arrangement of household chemicals under the bathroom, it is better to choose a product with shelves. But the deaf panels are aesthetically pleasing. They are very simply attached to the frame, but with their installation, access to the plumbing supply is limited, since not all models can be easily and quickly removed.

For a complete overview of all screens, see our dedicated article.

The most popular options among acrylic bath users are:

front panel.
solid screen of ceramic tiles;
sliding.

In our article, we will dwell on the installation of an acrylic panel in more detail, because consumers most often prefer this method of decorating the space under the bathroom.

Detailed information about tile screen installation and sliding panels see related articles

A photo

The photo below shows various interesting options decorating the space under the bathroom.

How to choose the right size?

Any panel for the bath is selected for a specific size. It is very important to check if it fits your plumbing model. The length of acrylic panels varies from 120 to 180 cm for standard fonts. And the height is 55-60 cm, but it can change if there are legs.

Often, acrylic panels come with plumbing and have the same tone with the bathroom, which allows you to look organic general design. They are made of plastic coated with an acrylic layer.

The advantages of the panels purchased with the font include the fact that they fit as tightly as possible to the sides of the bath, saving you from unaesthetic gaps. Experts do not recommend purchasing such screens separately, as they do not always fit exactly in size.

If the screen is purchased separately from the bathroom, then in order not to make a mistake with the choice of size, you should carefully measure the plumbing from all sides.

Front panel mounting

With the choice we have decided, now you can proceed with the installation.

It should be noted right away that regular screens are sold complete with all fasteners, frames and fittings. They also come with detailed step-by-step installation instructions.

To mount the protective screen, you will need the following tools and materials:

roulette;
marker or pencil;
building level;
screwdriver;
wrench;
silicone sealant.

How to assemble and fix the screen? Consider step by step instructions for installation for bathtubs of the Triton brand:

STEP 1. Adjusting the height of the bath. In order to avoid a wide gap near the floor, you need to match the height of the font and the front panel. We measure it with a tape measure and, using a wrench, twist the legs.

It is very important to check the level after all the manipulations. Don't forget to do it.

STEP 2. markup. Now you need to find plastic plugs on the frame or legs to which the screen will be attached, and mark on it with a marker the places for screwing in the screws, according to the location of the plugs.

STEP 3. Fastening. We apply the screen and, using a screwdriver, fasten it with self-tapping screws to the frame. Then we install special plugs on the screws.

The joint between the screen and the tile is best sealed with silicone sealant so that splashes do not get there and mold does not multiply.

How to install on corner models?

For corner baths, most often, fastening is provided not with self-tapping screws, but with special magnets and metal plates. Such magnets are initially attached to the legs of the font.

STEP 1. Height adjustment. Just as in the case with rectangular model adjust the height of the legs based on the parameters of the screen.

STEP 2. How to fix the plates? On the reverse side of the panel, in places where the magnets will abut, we glue the metal plates from the kit onto double-sided tape or silicone sealant. During drying, you can fix them with ordinary tape.

STEP 3. Mounting. Apply front panel and check that the magnets grab the metal plates.

This mounting option is convenient in that the question: how to remove the screen and then put it back on does not arise. Everything is extremely simple, you need to make a little effort, pulling the panel towards you, you can just as easily return it to its place. The previous method is not so simple, there you will first need to unscrew the screws.

Conclusion

In conclusion, it is worth noting that installing a screen on an acrylic bathtub has a lot of advantages. With it, you will transform the interior of the room and create additional space for storing household chemicals. To make the bathroom more functional and aesthetic, you should take a responsible approach to choosing a screen and carefully figure out how best to attach it.