Pumping unit grundfos sololift 2 c 3.

Sewage pumping unit Grundfos (Grundfos) SOLOLIFT2 C-3 Several years ago, the world leader in the production of pumping equipment Grundfos released an updated version of the popular sewage system SOLOLIFT 2 C3 / This unit is a compact device (including all the necessary pipes and connections for successful installation), which has a high efficiency and is a hermetically sealed plastic unit , relatively small size, in which are located - a pump with a "dry design" motor, which has a built-in check valve in the discharge pipe, as well as a level switch, a special ventilation built-in valve with charcoal filter improved quality, which allows you to effectively remove all sewerage in your kitchen, bathroom (excluding the toilet) and other similar rooms.

Pump type:	\|Sewer installation \|
Pump type:	Surface
Height:	34.1 cm
Width:	15.8 cm
Length:	49.3 cm
Weight:	6.6 kg
Working hours:	50% - 1 min. (30 sec on; 30 sec off)
Protection class:	IP 44
Mains voltage:	1 x 230 V
Maximum power consumption:	0.64kw
Water quality:	Dirty
Allowable temperature of the pumped-over liquid:	up to 75 ° C
Contents of delivery Grundfos (Grundfos) SOLOLIFT2 C-3:	Adapters with the same outer diameter and different meanings internal diameter corresponding to the size of the discharge line. Discharge branch pipe, adapter, pipeline are connected with a clamp. The eccentric inlet pipes allow the connection to be displaced by 10 mm, which facilitates the installation of the sewer system.
Maximum consumption:	204 l / min cbm / hour
Maximum head:	8.8 m
Insulation class:	F
Rated current:	3.1 A
On / off level (from the bottom of the tank):	65 (115) / 35 mm
Application:	Sink, shower, bidet, bath, washing machine/ dishwasher / kitchen sink
Advantages:	Operational reliability, easy care and maintenance, easy installation and replacement
Manufacturer country:	Serbia
Service in 24 hours:	Yes
Guarantee:	24 months

Grundfos SOLOLIFT2 (Sololift 2) is a unique series of compact sewer pumping units from the world leader in the production of pumping equipment that facilitate the discharge of wastewater from any household plumbing, regardless of the gravity drainage system. Price for sewage pumping units fully reflects their great functionality and high quality. The service life is calculated for more than 10 years (as well as for all equipment of the company Grundfos) ,warranty service life 24 months. Buy a pumping unit Sololift2 (sololift2) You can in our company, the entire range of products is always available for you, and highly qualified specialists are at your service to help you choose the equipment you need.

The units collect and pump waste water through a thin discharge pipeline (> 23mm) to the next overflow pipe - to a height of 6 m or to a distance of 100 m.

An additional toilet and a full bathroom in the attic or basement will no longer be just a dream, thanks to the use of SOLOLIFT2 WC 1 or WC 3, as well as Sololift 2 CWC 3.

Series consists of 5 compact options pumping units for the disposal of domestic wastewater.

3 installations sololift , and designed for pumping waste water from a toilet, sink, bidet, shower, washing machine and other plumbing fixtures.

2 installations< Grundfos Sololift 2 C-3> and Grundfos Sololift 2 D-2designed to pump wastewater from multiple sources (washing machine or dishwasher and sink).

Number in conventions models indicates the possible number of additional inlets (e.g. model Sololift2 C-3 has 3 inlets). SOLOLIFT2 (sololift 2 ) is designed in accordance with the needs of professionals, and therefore provide high reliability, simplicity and cleanliness during service.

The units are ready to use with a plug and work completely in automatic mode when supplying water to the drain tank of the pump.You can familiarize yourself with the operation of Grunfos Sololift2 pumping units in more detail

Application

The pump is used in cases where drainage from plumbing equipment, but no or impossible to use gravity drain pipe... Units with connection to a bathroom are intended only for installation in private houses or apartments. Other installations can also be used for commercial purposes.

WC-1, and designed to pump waste water from 1 toilet, 1 washbasin, 1 shower or 1 bidet.
CWC-3 it is an additional flexible option designed for integration into the front wall.

C-3 and designed to remove (hot) waste water from bath, shower, washbasin, sink, washing machine and dishwasher.

Compact dimensions allow them to be integrated into the front wall kitchen set or bathroom, and in the structural elements of the floor.

Explanation of the model name.

Explanation of the designation of SOLOLIFT2 installations:

WC - the model has a connection to the toilet and is equipped with a cutting mechanism

C - model with compact design

D - model for shower and sink

1 - one additional connection (excluding the toilet connection)

2 - two additional connections

3 - three additional connections

Attention! Models C-3 and D-2 are not equipped with a cutting mechanism.

The compact sewage pumping unit is equipped with:

Unit design in accordance with EN12050-2 standard, with unique properties, quick installation, long service life and easy cleaning.

Internal structure of the Sololift 2S3 unit

Installation examples for the Grundfos Sololift 2 C3

dimensions pump GRUNDFOS SOLOLIFT 2 C-3

net weight 6.6 kg
Tank capacity 5.7 l

Flexible discharge connection ∅22 / 25/28/32/36/40

Dimensions of possible inlet 1 x ∅32 / 36/40,
top connection 2 x ∅36 / 40/50, side

Start and Stop Levels Start: 72mm above floor level. Stop: 52mm above floor level

PH value of the pumped-over liquid from 4 to 10
Maximum fluid temperature 75 ° C continuously, 90 ° C for 30 minutes.

Temperature environment from +5 ° C to +35 ° C
Operating mode S3-50% - 1 min. (30 sec on; 30 sec off)

Rated current 3.1 A
Power factor (cos φ) 0.66 / 0.90

Rotational speed 2800 min-1
Protection class IP44

Insulation class F
Connecting cable 1.2 m; 0.75 mm2 (H05VV-F-3G).

Supply voltage 1x220-240 V, 5 Hz.

Installation replacement options Sololift + the previous generation on modern Sololift 2

Sometimes there are situations when a pump with a Grundfos Sololift grinder is simply necessary. The most common ones include:

Construction of a new bathroom in the basement. Its position turned out to be below the level at which the sewer network passes.
Renovation or redevelopment of the premises. At the same time, one cannot do without transferring or building a new bathroom, and due to the distant location of the entrance to the central sewerage system, the gravity option is impossible to implement.

In these two typical situations (although there may be many more), it is difficult to think of more suitable solution than a pumping unit with a grinder for the Sololift toilet bowl. Today on the plumbing market you can find many similar products, but none of them can compete with in functionality, reliability and technical characteristics. It is possible that the price of plumbing fixtures from other companies with much worst performance may not be competitive.

In any case, domestic buyers have already appreciated the fecal toilet pump from the manufacturer Grundfos.

Faecal pumps for the Sololift 2 WC toilet

The drainage pump from Grundfos is a truly unique plumbing design. If you decide to buy this product, then before you do this, it is highly advisable to familiarize yourself with the entire model range (Sololift 2 WC 1, Sololift 2WC-3b Sololift2 CWC3) to study specifications and features. This knowledge will help you choose the best option at a price, and the most suitable for certain operating conditions.

Toilet pump. It should be borne in mind that this device involves the installation (in addition to the toilet) for a maximum of 3 plumbing units: shower, washbasin and urinal (or bidet). Pumps of this series are practically no different from Sololift2 WC 1 (toilet connection + one more source).

The main purpose of all plumbing devices listed above is to transport waste water from the plumbing unit to the sewer. Grundfos Sololift pumps are compact and fully automatic. A chopping knife is located inside the pumps. All stations are capable of efficiently removing fecal wastewater with varying degrees of intensity (medium and low). One of the conditions normal work equipment Grundfos Sololift is the temperature of the passed liquid - no more than 50C. The devices are not intended for pumping liquids with large mechanical fragments and chemically aggressive solutions.

Also, the Grundfos Sololift 2 C3 installation is very popular with consumers all over the world, which is intended for installation in the kitchen, laundry room and other places where you can have a sink, washing machine and dishwasher. Due to its high shadow characteristics, namely power and ability to pump water with a temperature of up to 90 degrees Celsius, it is indispensable when pumping the used water into the sewer.

Requirements for the operation of pumping units

In order not to spend money in vain (the price of Grundfos pumps cannot be called cheap), you need to decide on the most suitable for this specific situation model. And only then buy it. You should also stick to following requirements for operation:

installation of equipment must be done correctly;
periodically it is necessary to clean all internal elements of the pump;
adhere to the manufacturer's recommendations for use as much as possible;
do not allow the penetration of chemically aggressive substances (acids, alkalis) into the installation. For solid objects, only toilet paper can be emptied into the toilet.

You can install the grinder pump yourself, but it is still better to call an experienced specialist.

Maximum productivity	11.1 cc m / hour
Power	640 Wt
Voltage	220 V
The presence of a cutting mechanism	No
Connectivity	washing machine and dishwasher, bath, sink, shower, bidet
A type	Surface sewer installation
Maximum temperature of the pumped-over water	from 75 ° С, within 30 minutes at t 90 ° С
Pipe diameter	32 mm, 40 mm Ø
Dimensions (LxDxH)	373.3x158.3x255.3 mm
Weight	6.6 kg
Guarantee	2 years

A versatile compact sewage system designed for transporting waste water and connecting to a variety of sanitary fixtures. Among the entire series, the Sololift 2 C-3 model has the highest working capabilities, the unit can be connected to:

sink,
shower cabin,
bath,
washbasin,
washing,
dishwasher.

Please note that this model is not equipped with a cutting mechanism, the ingress of foreign objects into the wastewater may cause damage to the equipment. The device is designed exclusively for draining gray waste water.

A simple principle of operation and high-quality components are the guarantee of many years of efficient operation. The household pump is easy to maintain and does not require any additional upgrades; it goes on sale completely ready for installation.

The pumping unit is capable of pumping out liquid with a temperature of 75 to 90 C, depending on the duration of operation, the maximum time of uninterrupted operation is half an hour, this is quite enough to drain waste water.

Design features and principle of operation of the pump SOLOLIFT2 C-3

The Danish company produces high-quality, reliable and functional pump equipment... The Sololift 2 line is very popular, has a huge number of positive reviews and fully meets modern requirements.

For the production of compact sewage systems, the manufacturer used the most suitable materials and reliable components. Innovative technologies and numerous studies have allowed the release of a series of unique units that allow you to save on the organization sewer system and efficiently performing wastewater disposal.

For the manufacture of cases, the manufacturer uses heavy-duty composite materials.
The "dry" design of the engine increased the product life and simplified maintenance.
The motor is housed in a specially designated plastic compartment so it stays clean at all times.
The non-return valve prevents overflow and reverse flow of liquid.
Special charcoal filter effectively prevents penetration unpleasant odors into the room.
The sololift 2 c 3 has three additional connections.
Level switch, located in an accessible place.
The cable length is 1.2 m.

High technical characteristics and quality materials provide a long service life.

Installation of a household pump is very simple, you can make the connection yourself, following the manufacturer's instructions included in the kit. The manual describes in detail each stage of installation and start-up of the equipment.

The simple operating principle is based on automatic switching on and shutdown of the installation, as soon as the tank is completely filled, the pumping mechanism carries out the discharge of waste water to the main sewer pipeline. After the tank has been emptied, the unit automatically shuts down.

Where is the Sololift 2 C-3 GRUNDFOS used?

A unique household pump will help you realize all the most daring ideas associated with rearranging the plumbing area, creating an additional bath for guests or moving the kitchen from one room to another.

The main task of such sewer stations transportation of wastewater to the main pipeline of the sewer system, the device will allow you to install a shower cabin in the attic or organize a laundry room in the basement, install an additional toilet and sink.

The unit successfully carries out waste water removal without faeces from nodes located below or above, as well as far from the main sewer pipe.
In the case when the water does not go well due to a slight slope, a compact installation can also help and will eliminate the problems once and for all.

Model grundfos sololift 2 with 3 works with slightly soiled waste water, it is strictly forbidden to use equipment for pumping chemicals and aggressive substances.

Simple and quick front mounting is carried out using adapters and flexible hoses, all joints are treated with a sealant.

Reliable sewage pumps Sololift 2 will create conditions and comfort anywhere.

Photos of installed Sololift

Specifications
Possible connections	Toilet, urinal, washbasin, sink	Toilet, urinal, washbasin, sink, shower, bidet	Wall mounted toilet, urinal, washbasin, sink, shower, bidet	Shower, sink, bidet	Washbasin, dishwasher, washing machine, shower, bathtub, bidet, sink
Consumption	620 W	620 W	620 W	280 W	640 W
Voltage	1x220-240 V-10% / + 6%, 50 Hz	1x220-240 V-10% / + 6%, 50 Hz	1x220-240 V-10% / + 6%, 50 Hz	1x220-240 V-10% / + 6%, 50 Hz	1x220-240 V-10% / + 6%, 50 Hz
Weight kg	7.3	7.3	7.1	4.3	6.6
Pumped liquid temperature	Max. 50 ° C	Max. 50 ° C	Max. 50 ° C	50 ° C	75 ° С (no more than half an hour 90 ° С)
Rated current	3.0 A	3.0 A	3.0 A	1.3 A	3.1 A
Flow l / min	Max. 149	Max. 149	Max. 137	Max. 119	Max. 204
Pressure	8.5 m	8.5 m	8.5 m	5.5 m	8.5 m
Power cable	1.2 m, 0.75 mm²	1.2 m, 0.75 mm²	1.2 m, 0.75 mm²	1.2 m, 0.75 mm²	1.2 m, 0.75 mm²
Work cycle	S-3-50% -1 min	S-3-50% -1 min	S-3-50% -1 min	S-3-50% -1 min	S-3-50% -1 min

this small-sized, fully equipped and ready-to-install pumping unit is a hermetically sealed plastic tank in which there are - a pump with a “dry design” motor with a check valve in the discharge pipe, a level switch, vent valve with improved carbon filter (no additional filters required), electrical cable length 1.2 m with Shuko plug. The pump switches on automatically when the tank is full (switch-on level) and automatically switches off when it is empty (switch-off level).

Pumping vertically is 8.8 m, horizontally 90 m

The design allows you to pump wastewater with a temperature up to 75 ° C in continuous operation and up to 90 ° C within 30 minutes.

Sololift2 C-3- a small-sized, fully equipped and ready-to-install sewage pumping unit for pumping domestic wastewater (without faeces) from those rooms in private houses from which wastewater cannot be directed into the sewage system by gravity.

Sololift2 C-3 is commonly used for:

shower cabins,
washbasins,
baths,
washing machines (maximum 90 ° C)
and dishwashers OK

in the floor basements below the sewer level, or in connection with the repair or modernization of existing buildings, when their location may be at a distance from the main sewer riser and it is not enough to establish a natural bias.

Sololift2 C-3 suitable for installation under a washbasin, or especially suitable for installation in confined spaces in structures near walls and built-in wardrobes. Low levels on / off switches are suitable even when used with a shower tray.

The compact sewage pumping unit is equipped with:

Cable with plug
Horizontal or vertical discharge connection with several adapters for pipes Ø22-40 mm
Built-in non-return valve
Electric motor, dry design, with high efficiency, including thermal protection, level switch and controller
Eccentric inlets (adjustable in height) for pipes with a diameter of Ø36 or 40
With manual clogging protection and separate drain connection for maintenance
Outlet valve with overflow protection
Lugs for fixing and mounting

Unit design in accordance with EN12050-2 standard, with unique properties, quick installation, long service life and easy cleaning.

Specifications Grundfos SOLOLIFT2 C-3:

Application: Sink, shower, bidet, bath,washing machine, dishwasher, kitchen sink

Model number: 97775317
Pump type: Sewage installation
Maximum flow: 204 l / min
Height: 34.1 cm
Width: 15.8 cm
Maximum head: 8.8 m
Weight: 6.6 kg
Length: 49.3 cm
Pump type: Surface
Country of origin: Serbia
Service in 24 hours: yes
Warranty: 24 months
Protection class: IP 44
Insulation class: F
Mains voltage: 1 х 230 V
Rated current: 3.1 A
Maximum power consumption: 0.64 kW
Working mode: 50% 1 min. (30 sec on; 30 sec off)
Permissible temperature of the pumped liquid: up to 75 ° C
On / off level (from the bottom of the tank): 65 (115) / 35 mm
Water quality: Dirty

Contents of delivery: Adapters with the same outside diameter and different inside diameters to match the size of the discharge line. Discharge branch pipe, adapter, pipeline are connected with a clamp. The eccentric inlet pipes allow the connection to be displaced by 10 mm, which facilitates the installation of the sewerage system.

Advantages: Operational reliability, easy care and maintenance, easy installation and replacement

REPLACING SOLOLIFT + for SOLOLIFT2

We suggest you buy Grundfos SOLOLIFT2 C-3 at a bargain price of 24,050 rubles.

Grundfos SOLOLIFT2 C-3 is different high quality and the best price. The manufacturer is known all over the world and provides a guarantee for its products.

To buy Grundfos SOLOLIFT2 C-3 in our online store, you just need to place an order online on the website

SOLOLIFT2 This is a unique series of compact sewage pumping units that facilitate the discharge of wastewater from any household plumbing, regardless of the gravity drainage system.

The units collect and pump waste water through a thin discharge pipeline (> 23mm) to the next overflow pipe - to a height of 6 m or a distance of 100 m.

An additional toilet and full bathroom in the attic or basement will no longer be just a dream thanks to the use of SOLOLIFT2.

The series consists of 5 compact versions of pumping units for the disposal of domestic wastewater. 3 units WC-1, WC-3 and CWC-3 are designed for pumping waste water from toilets and other plumbing fixtures. 2 units C-3 and D-2 are designed for pumping gray waste water from several sites.

The number in the model legend indicates the number of optional inlets available. SOLOLIFT2 is designed in accordance with the needs of professionals, and therefore provide high reliability, simplicity and cleanliness in service.

The units are ready to use with a plug and operate in fully automatic mode when water is supplied to the tank.

Application

The pump is used in cases where drainage from plumbing equipment is required, but there is no or it is impossible to use a gravity drainage pipe. Units with connection to a bathroom are intended only for installation in private houses. Other installations can also be used for commercial purposes.

WC-1, WC-3 and CWC-3 are designed to pump waste water from 1 toilet, 1 washbasin, 1 shower and 1 bidet.
The CWC-3 is an optional flexible version designed for integration into a front wall.

C-3 and D-2 are designed to remove (hot) waste water from bathtubs, showers, washbasins and washing machines.

Their compact dimensions allow them to be integrated into the front wall and floor structures.

Features and Benefits

Pumping solution simplifying installation;
Installation instructions;
The most high reliability thanks to high operational characteristics cutting element and motor;
Fast, simple and clean service maintenance- no need to remove the unit from the installation site;
The "dry" design of the engine and all associated serviceable parts makes renovation work and maintenance is simple and clean;
Easy access to level control relays, access for Maintenance;
Sealed system with welded tank, no leakage in case of reverse flow;
No unpleasant odors thanks to the exhaust valve and charcoal filter;
Maintenance-free tank design reduces the risk of sludge and clogging;
The installation is resistant hot water up to 90 ° C for 30 minutes;
Ultra-compact design;
Low start-up levels allow modern flat shower trays to be installed;
Possibility to select the direction of the outlet (up and to the side);
Easy installation and replacement of height-adjustable inlet connections;
Choice of up to 4 inlets and 6 pressure pipe connections;
All units are approved according to LGA, VDE, EMC, GOST standards.

Price, rub.

Article: 97775317

is a compact, ready-to-install, automatic sewage pumping unit. Used in all types of buildings for pumping faeces-free gray wastewater.
The unit is designed in accordance with EN 12050-2.

Areas of use

Sololift2 C-3 is suitable for pumping gray waste water from washing machines, dishwashers, bathtubs, showers, washbasins or kitchen sink... The unit is designed for front wall mounting. The professional design allows you to pump wastewater with temperatures up to 75 ° C, with continuous operation for 30 minutes up to 90 ° C.

Typically, these settings are used in the following cases:

In the basement below the sewerage level.
In connection with the reconstruction or modernization of buildings in which gravity drainage is impossible due to the fact that sewage pipe is situated on great distance, for example, from the attic.

Features and Benefits

Durability and operational reliability

The powerful electric motor guarantees optimum operational reliability when pumping gray wastewater at temperatures up to 90 ° C.

Easy installation and replacement

Height-adjustable inlet and outlet connections ensure ease of installation and replacement.

Two selectable switching levels to suit any application. Moreover, thanks to narrow design installations it can be mounted in tight spaces.

Simple care and maintenance

The removable, compact pump-motor unit allows any maintenance procedure to be carried out quickly and cleanly.

There is no need to disconnect the pressure and supply lines or dismantle the unit for maintenance.

Equipment design and equipment

Sololift2 C-3 is supplied with a reservoir made of composite material sewage-resistant, with an inspection cover.

Specifications:

Adapter (branch pipe) for supply pipelines Ø32 and Ø40.
Two additional lateral inlets. One connecting piece with clamps included.
Two lateral inlets with integrated check valves, protecting against liquid backflow.
Hose nozzle adapter for connecting a washing machine or dishwasher.
Vent valve with charcoal filter, overflow protection and built-in adapter for Ø20 air vent.
Automatic pipe coupling for connecting the pumping unit.
The combined pump and motor are fixed in the tank with three captive screws. The discharge port of the pump, which connects to the internal piping of the tank, is fixed with an automatic pipe coupling inside the tank.
1.2 m cable and plug.
Flexible connecting hose for suction pipes Ø32 and Ø40.
Supports for floor mounting including screws and dowels.
Check valve.
Adapters for discharge line from Ø22 to Ø40.
Drain hose with clamps and tap.

Technical details

Net weight	6.6 kg
Tank capacity	5.7 l
Flexible discharge connection	Ø22 / 25/28/32/36/40
Possible entrance dimensions	1 x Ø32 / 36/40, top connection 2 x Ø36 / 40/50 on the side
Start and stop levels	Start level 1: 65 mm above floor level Start level 2: 115 mm above floor level Stop level: 35mm above floor level
PH value of the pumped liquid	from 4 to 10
Maximum liquid temperature	75 ° C continuous 90 ° C for 30 minutes
Maximum head	8.5 m
Maximum flow	204 l / m
Ambient temperature	from +5 ° C to +35 ° C
Working hours	S3-50% - 1 min. (30 sec on; 30 sec off)
Supply voltage	1 x 220-240 V - 10% / + 6%, 50 Hz
Power consumption, P1	Max. 640 Wt
Rated current	3.1 A
Power factor (cos)	0,66/0,90
Rotation frequency	2800 min-1
Protection class	IP44
Insulation class	F
Connection cable	1.2 m, 0.75 mm2 (H05VV-F-3G)

dimensions

Sololift2 units are CE marked and have the following certificates: