How to cover the lining inside the premises. How to cover the lining inside the house? How to cover a pine lining

Wooden lining is beautiful, natural material. It is not surprising that so many users around the world prefer it as a finishing and cladding material.

Environmental friendliness and natural beauty wood not only decorates the room, but also creates a certain microclimate in it. And the lining covered with a dense coating (paint, varnish) allows you to create any decor.

But, the tree has a significant disadvantage, which affects performance characteristics lining - it undergoes rotting, various damages, and also tends to darken.

This article is intended for those who want to protect and at the same time keep the lining in its natural form. Consider step by step how and what is better to cover (impregnate, process, paint).

I must say that the “take a brush, paint and paint” method is good, precisely because of its simplicity. But how long will wood painted in this way last? Wouldn't it be better to choose a more thorough and correct approach?

Proper painting of wooden lining consists of 4 stages:

Stage 1 - preparing the lining for painting

For eurolining, such a stage will be superfluous, since manufacturers are guided European standard, which provides for the mandatory primary processing of wood with protective compounds.

Those who bought a standard lining domestic production or is dealing with an already painted surface, it is necessary first of all to carry out the initial processing of the panels.

Preparing a new lining

Preparation of new slats includes:

sorting. It is known that the intersection of varieties up to 10% is allowed. That is, a batch of first grade lining may contain up to 10% of second grade lamellas. In order not to disturb the surface, they need to be sorted;

drying. Purchased lamellas must be dry before installation;

aging in temperature regime premises in which it is planned. It is natural to heat the sauna so that the boards “warm up” makes no sense. But here it is necessary to lie for 2-3 days in the room where they will be installed by the boards;

removal of defects. The surface defects of the lining include chips, roughness, the appearance of blue, white spots, dead (falling out) knots. On part of the panels, defects can not be touched. This is due to the fact that in the process of work, a short lining will be needed. For example, for finishing under a window or above a door. However, in order to proceed with the installation on an open surface, the boards must be cleaned of defects by bleaching (for this purpose, it is recommended to use SenezhNeo or Hoarfrost). Grease stains can be removed by deresining - rubbing with a 25% acetone solution. Roughness is removed with sandpaper (sandpaper) or a metal brush.

Preparation of the operated (old) lining

Unfortunately, painting a wooden lining is not an action that can be performed once for the entire period of its operation. Painting lining is a process that needs to be repeated periodically.

In the event that it is necessary to paint previously painted, varnished surfaces, the panels must also be pre-treated.

When to paint the lining:

peeling of the bottom layer of paint;

loss of lamella color;

loss of gloss of paint or varnish;

the appearance of a significant defect, for example, the ingress of fat, oil, solvent, other dye, the manifestation of fungi on the surface of the lining;

new style, thirst for change and fashion. For example, the existing color of the lining does not fit into the updated interior of the house and other factors.

How to clean the lining from varnish, paint and dirt

Take off old paint or varnish from lining in two ways:

Mechanical. In this case, existing coverage removed with a scraper, wire brush or building hair dryer and spatula. To completely remove the paint, you need to treat the boards with a solution of soda (100 g of soda for 1 liter of water). A significant disadvantage of the method is the possibility of damaging the lamellas with a scraper. Tip: this method is suitable for cleaning the lining from oil paint.

Chemical. It involves the use of various synthetic solutions and compositions (washes, softeners), which contribute to the peeling of the paint from the base. It is worth noting that chemical method pretty aggressive. Work with solutions in a well-ventilated area with the necessary equipment personal protection. After removing the surface layer, the lamellas should be washed with water or rubbed with white spirit.

How to process the lining inside the house - this question worries many who use this product for decoration various rooms. Of course, the material can be left in its original form, but then it must be borne in mind that the service life of the coating will be only 5-6 years. This perspective does not seem entirely appropriate.

It is necessary to process the material in order to increase its operational properties and maintain an attractive appearance(strengthen the visual impression). It should be noted that work with lining consists of several stages, each of which is important.

So, lining processing is necessary to improve the following characteristics:

Fire resistance. This characteristic allows you to increase the duration of the spread of flame over the surface, ignition time or completely prevent the occurrence of a fire.
Protection of the product from mold and fungi, which lead to destruction. Especially this indicator should be increased in places high humidity.
Increased resistance to mechanical damage. This property is necessary for those areas that are constantly exposed.
Immunity to ultraviolet. Minimizes fading and drying.

Processing lining allows you to extend the life of the material

Not to mention the decorative factor. It lies in the fact that a substance is applied to the surface of the material, which improves its decorative characteristics. Moreover, the surface can remain the same as it was originally, or completely transformed.

Various types of formulations for processing

The modern market of construction and finishing materials offers a wide range of different compositions that can be used for this type of work. Processing lining inside the house is done independently, without the use of special equipment.

The processing of the lining must be carried out with special compounds

On a note! To get a good result, you need to purchase products that have the necessary certificates, and are also produced by trusted manufacturers. The fact is that there are many fakes on the market that are not only useless, but also harmful to the human body.

Antiseptic solutions

Such substances are used to protect wood from the occurrence of living organisms (mold, fungi, insects and even mice). The material is treated with this preparation before cladding, due to the fact that it must be applied to the entire surface of the product. Such a procedure is especially indispensable when it is planned to use lining on objects with high level humidity.

The application of an antiseptic allows you to protect the wood from mold, microbes and fungus

It should be borne in mind that this solution performs exclusively protective functions. Therefore, it is applied before using decorative components. When choosing antiseptics, pay attention to the place of application. The label must indicate that the product is intended for indoor use.

The work is carried out as follows:

Each fragment is processed separately. Surface treatment on only one side will not bring the desired effect.
As a tool, a brush and a roller are used.
The antiseptic is applied to the entire surface in a thin and even layer. It is advisable to process all areas - notches, corners.
Each element is left for a while - until completely dry. It is necessary to avoid that the material is in contact with each other during drying.

Work on processing the lining with an antiseptic must be carried out separately with each element

Thus, wood is obtained that will be resistant to various microorganisms that multiply in a humid environment.

flame retardants

These compounds are necessary in order to reduce the likelihood of fire. Applying this material is quite difficult. Impregnation of lining with flame retardants will be much more effective if it was produced at the enterprise. Although it is impossible to exclude self-application of the substance.

The composition is divided into two groups, which differ in the mode of action:

Flame retardants that prevent combustion by releasing non-flammable gases.
Substances that form a protective film on the surface of the product.

Impregnation with flame retardant reduces the likelihood of ignition of the material

It must be understood that these solutions cannot completely protect against the effects of fire. They only increase the time it takes for the processed elements to ignite.

To know! Now there are solutions that combine the actions of an antiseptic and a fire retardant. This is a combined composition that has a combination of their positive properties.

Priming compositions

The primer is applied before applying decorative substances to the lining. This is necessary in order to increase the adhesion of materials, as well as reduce their consumption.

Before applying varnish or paint, the lining must be treated with a primer

The outer parts of the product are processed. It should be borne in mind that priming can be single-layer and two-layer. It depends on whether the treatment was performed with other compounds, as well as what kind of wood is used.

On a note! Currently, it combines a lot positive qualities. It will not only reduce the consumption of subsequent materials, but also serve to protect against fungus and mold.

wood stain

The stain is used as an impregnation if it is planned to use a colorless varnish or wax in the future. It evens out the color of the wood and protects it from changes. Currently, this material has another protective property. It includes the functions of an antiseptic.

Wood stain improves the color of wood, and is also used as an antiseptic.

Before work, it is necessary to decide on the choice of solution, which can be on a different basis (alcohol, water and oil). The composition is available in finished or dry form. But the method of application is completely the same.

Wax

The main task of wax is to protect the surface from damage, as well as to eliminate the likelihood of poisonous fumes. The last factor refers to cases when lining is used for lining saunas and baths. That is, it is necessary to prevent the release of toxic substances when exposed to high temperatures.

Waxing should be done with a soft cloth.

cannot be excluded purely decorative effect. The treated surface acquires a deep and even color.

The work is carried out according to the following principle:

A certain amount of material is applied to the surface.
Rub it with a soft cloth until it is completely penetrated.
Several layers should be applied.

Some manufacturers indicate additional terms required for wax application.

varnish

Lacquer is needed in order to give the surface beautiful view and protect it from damage. The inner perimeter of the premises is best treated with acrylic compounds on water based. This solution is transparent and translucent. If required, it can be dyed by adding color.

Lacquering allows you to give the lining a more spectacular look and protect it from damage.

The following application technology looks very nice:

Initially, the first layer is applied - a completely transparent composition.
The second layer is a translucent solution. It forms an interesting shade.

This principle allows you to preserve the natural texture of the tree.

Paints can also be used, but they are rarely used, as they completely hide the natural surface of the material.

Lacquer for lining inside the house improves the appearance of the finish and prolongs the service life. What are the goals for creating comfortable conditions residence?

The house is a fortress, a place of spiritual rest after a busy day, a cozy, reliable rear. Comfort and peace can be ensured in the house only by properly selected finishing materials and the creation of an interior corresponding to the state of mind with your own hands. The tree never went out of fashion, just products from it were improved, external processing improved.

To determine which lining is best for the home, we turn to specialists for information.

Interior and exterior decoration of buildings

What and why do you need to sheathe the premises? If we conduct a survey of residents apartment buildings on the subject of their desires, many want to live closer to nature, outside the city in their house, work at home on the Internet remotely and dig in the beds in their free time from the road.

Others will never change for anything city apartment, but create a special, cozy atmosphere in a house as close to nature as possible, using wooden lining for decoration. For the manufacture of lining, trees are cut down, both locally and abroad. Pine, aspen, birch, linden, larch, oak, cedar (see) - a very small list of trees suitable for the production of lining.

What determines the choice of lining

First of all, the choice of lining depends on the room where the surfaces will be sheathed:

In rooms with high humidity, which include a balcony (see), bathroom, kitchen and toilet, it is preferable to use plastic lining(PVC).
The walls in the hallway, bedroom, office, living room should "breathe", so wooden products are important there. The choice of wood species is also not in the background. Pine in the steam room is nonsense. When heated to a high temperature, a resin begins to be released that can burn the skin.
Plastic lining in the interior country house has the right to life. It has a huge color spectrum, allows you to get interesting color solutions. It is easy to take care of it and simply dismantle it during repairs, since plastic is subject to mechanical stress and its service life is not very long.
The advantages of wooden lining include high sound insulation, the ability to retain heat, a beneficial effect on human health, and a long service life due to the high resistance to decay after appropriate processing and staining.

Attention: Only wooden products are divided into classes "Extra", A, B, C, where "Extra" has the highest cost and quality.

Cladding surfaces are finished for more than one year, craftsmen recommend not saving on materials and acquiring high-quality cladding panels. This statement especially applies to the bedroom, living room, office. Even more can be said, if coniferous panels of the appropriate quality are used in them, then the rooms are filled with the pure smell of the forest, giving the atmosphere a constant unity with nature.
Next, you need to decide different rooms. The goals of the owners converge, and each owner wants to get both outside and inside:

Sheathing that is resistant to moisture even with direct contact between water and wood.
To the strong influence of ultraviolet radiation.
Resistant finish to mechanical damage.
Processing lining inside the house should protect the wood from insects that can cause harm. This is especially true for suburban buildings and cottages.
beach wooden products- fungus and mold, they also have protective equipment and compositions.

Unfortunately, all these Wishlist cannot be solved with one tool, because there is no way to connect the components. Instructions and experts offer ways to solve individual problems in order to get a single picture of the protective properties.

What is interesting on the market

So:

One-component varnishes water-based are characterized by low strength and durability, but working with them is much easier.
Two-component varnish contains a base and a hardener. The video in this article provides data on its application. Most often it is used for lining, making its protection much more effective.

Attention: Varnish consumption is determined by the brand and thickness of the applied layer. For processing planed products and lining, you need 1 kg of varnish per 17 m², for sawn, untreated wood - 1 kg per 7 m².

Regardless of the type of varnish, it is distinguished by the fact that there is no solvent in the composition and you don’t have to think about how to cover the lining in the house so that an environmentally friendly atmosphere remains. Its use guarantees complete safety.
Some may object and speak out in favor of lining without any coating at all. This option also has its positive arguments. What is an uncoated lining? It is impossible to say that this is a pitiful sight. From time to time, it simply darkens and many are not embarrassed by this fact, they simply update it after 5-7 years.
The idea of how to process the lining inside the house gives a simple analysis of their purpose.

Drying oil refers to an outdated type of coating used in utility rooms. It can be noted that she copes with protection, but does not stay on the surface for long.
flame retardants allow to increase fire safety wood, reducing flammability finished products. When choosing a lining, it is necessary to pay attention to this fact of processing in the industrial version. Manually at home, you cannot get the desired effect due to the inability to provide the desired pressure on the surface.
Bactericidal formulations have antibacterial properties and protect the tree from decay processes. When buying such mixtures, you need to find a special mark on the package "for internal works”, meaning water-based.
Water based acrylic varnishes allows them to be used at the final stage of processing. Acrylic varnish performs two functions at once - it protects the tree and decorates it. When there is a desire to preserve the texture on the lining, then these varnishes are used, which are applied in two steps. Transparent at first, then varnish is used with a mixture of the desired color.
How to cover the lining inside the house and is it possible to use synthetic varnishes, because they are more toxic when compared with acrylic. It turns out that they are also used, because it turns out a very smooth surface with a rich sheen, but more often for outdoor work due to toxicity. Toluene and xylene have the ability to concentrate in indoors and provide harmful effect on the health of the inhabitants of the house.
Instead of varnish for interior work, wax-based formulations are great. We must immediately make a reservation that they are difficult to apply to the surface, but their excellent protection and delightful semi-gloss pay off all the costs and difficulties. The main thing is that the selected composition is combined with the finish coating.

Separately about water-based varnishes

These compositions need to be given a separate section, because they have a number of advantages.

What is the lining inside the house covered with, if not with these mixtures? They do not have toxic substances, stinking solvents, they are recommended for use in the children's room, and this says a lot.
The water base prevents the treated surface from burning.
The original shade remains unchanged for a long time when other materials turn yellow under the influence of sunlight.
Under it, the color of the wooden sheathing is preserved for a long time.
When following the recommendations from the packaging, it is easy to use, and working with it can be a pleasure.
It does not roll off the surface of the lining due to high-quality adhesion to it, which makes varnishing simple and affordable for beginners.
Large areas are quickly treated with a sprayer, and the water base prevents the varnish from remaining in the equipment without contaminating it and making it difficult to maintain.
We can not leave aside the shortcomings of the water base of acrylic.

The high cost of the compositions.
Long period of drying of layers.
The negative impact of temperature and moisture changes.
When working indoors, there must be a positive temperature, otherwise the varnish will become unusable due to freezing of the water base.
Despite the fact that very high-quality varnishes (therefore expensive) can withstand up to 5 cycles of freezing and thawing, but why do these experiments in your own home.

It is impossible to assert that all negative properties are fatal and inherent in all varnishes. If the recommendations for their use are followed, these formulations will become perfect choice for wooden products.

Decorative paints for lining

Decorative paints continue the theme of how to cover the lining inside the house and provide reliable protection.

Oil paints quickly penetrate into the structure of the tree, but dry slowly, losing color saturation over time. They are not recommended for covering all surfaces in the room, as the wood stops "breathing".
Acrylic paints shine and retain an attractive appearance much longer. oil paints. They are superior in other respects as well. For example, significant changes in temperature do not lead to cracking. The high price, which can be attributed to a major drawback of this product, does not stop connoisseurs of beauty and quality.
The most of the most the best option for processing lining - acrylic scuba. The absence of toxicity, heavy metals, it does not cause allergies among the inhabitants of the house, all these qualities have led to its popularity.
From the variety of mixtures and products offered, it can be seen that there are many options for how to process the lining outside the house and inside. The marking of the offered goods and the place of application will help to prevent the mistake of choice.
The photo shows a decent work, carefully prepared.

The surface is clean and free from contamination.
Surface polished. A good result is obtained with wet grinding, when the lining is wetted, processed and dried well.
Coating wood panel primer leads to a reduction in varnish consumption.

Indoors, it is allowed to work with varnish with a brush, roller, sprayer, observing the following recommendations.
A colorless varnish is applied along the grain of the wood.
Decorating varnish is sprayed, and if there is no sprayer, then a swab is used.

Attention: The tinting varnish must have a uniform shade and structure, therefore it must be thoroughly mixed.

Any varnishes can be diluted with plain water, except drying oil and other organics.
Even layers are obtained by applying thin strokes, not thick ones.

Surfaces will have a deep, high-quality finish if they are first passed with a tinted varnish with a more dark shade, and then enhance the impression with a transparent varnish with tinting, but not more than 10%. Each subsequent layer is applied after the previous one has completely dried.

If, after drying, the layer is additionally treated with a “zero” before being coated with the next layer of dye, then a surface will be obtained that can please even the master with its deep and uniform color.

Artificial finishing materials gradually survived their boom, and gradually the wood began to win back the market. Such a statement is relevant not only for the construction of houses, but also for their interior design clapboard. Completely environmentally friendly cladding gives additional comfort, warmth and beauty to the premises. However, not knowing how to cover the lining, some owners leave it unprotected. As a result, beautiful wood, which, if properly processed, could serve for many years, needs to be replaced after 5-7 years. This happens due to its destruction, the appearance of chips, stains during cleaning, pollution.

Processing lining with varnish

The main purpose of wood processing

After sheathing interior spaces clapboard, it is necessary to carry out the first surface treatment no later than a week later. Using a varnish correctly selected for the conditions of the internal microclimate, it will be possible to guarantee the material:

durability - after varnishing, the appearance of fungus, mold, and decay is no longer possible;
aesthetics - neutral reaction to UV radiation;
improved performance - the outer layer protects against impacts and other types of physical impact;
fire resistance - protected wood can withstand a strong fire pressure.

Regardless of the type of varnish chosen, the lining is pre-treated various materials: drying oil, antiseptic, protective impregnation, stain or subjected to heat treatment. For self-fulfillment This procedure uses a burner that is slowly scorched upper layer each element, achieving uniform darkening.

In the process of processing, especially in coniferous species, resin is released, which gives the lining a special originality. However, now such operations are carried out much less frequently, since there are more effective protective equipment and varnishes on sale, which are much faster to work with.

How to choose a lacquer

When choosing how to cover the lining, you need to familiarize yourself with all types of such products. The most popular among builders are varnishes:

water soluble;
polyurethane;
alkyd;
acrylic.

All of them are suitable for application inside residential premises, as they do not emit toxic fumes and are completely safe for the health of the inhabitants of the house. At the same time, polyurethane and alkyd types of varnishes can also be used for external processing of structures, which makes them universal and facilitates the task of painting the owners.

It looks like varnished lining

Acrylic

Great for helping wood retain its unique texture and are good choice for those who are just deciding how to paint the lining inside the house. They protect surfaces from exposure to sunlight, and the aesthetic perception of the lining only benefits from this.

Depending on the basic composition, following the instructions, acrylic coatings are diluted with water, alcohol or ethers, which dry very quickly after application. Acrylic surfaces do not tolerate moisture well, so when dirty spots appear on the walls, it is better to refrain from the desire to wash them. Moreover, it is undesirable to use these materials in particularly wet areas, for example, in the kitchen.

Alkyd

No less beneficial, because they are moisture resistant and, in contrast to acrylic counterparts, the surfaces covered with them can even be washed. True, without the use of household chemicals and abrasives. An actual advantage if small children and pets live in the house. In addition, after complete drying, the varnish becomes so durable that it can withstand some physical exercise protecting the wood directly from chips and scratches.

disadvantage alkyd varnishes is an bad smell while working with it and a long drying time of at least 48 hours. The last problem is easy to deal with by adding a special hardener to the composition.

Polyurethane

It is difficult to overestimate their advantages, since this type of varnish protects the lining not only from problems and aging during inner lining, but climatic tests for outer walls structures. This coverage guarantees:

increased moisture resistance;
lack of reaction to chemical components, alkalis;
UV resistance.

The presence of so many positive qualities also determined the price of polyurethane varnish - it is much higher than other analogues.

water soluble

All water-based varnishes, among which acrylic is also listed, are characterized by quick drying and a complete absence of unpleasant odors. They are so non-toxic that it is possible to paint the lining inside the house using such compounds even without a respirator. Water-soluble varnishes are applied only to the lining located inside the house.

An example of a water-soluble varnish for lining

What to consider additionally

There are several nuances, considering which you can create a very durable, high-quality and aesthetic coating:

Regardless of the type of varnish chosen, maximum strength can be achieved by applying it in 2 layers.
If the varnish is offered for sale in two forms: translucent and completely transparent, the second option is applied first. The surface will receive a certain, more saturated shade, but at the same time, the structure of wood will also be preserved for visual viewing.
We must not forget about the protective impregnation against biocorrosion, which must be carefully processed lining before varnishing.
During operation, the varnishing agent is often stirred to maintain a uniform structure. When the first layer is completely dry, it needs to be sanded a little and only then re-paint the lining inside the house.

Covering the lining with varnishes does not present any particular difficulties. The owner of the house will be able to cope with such work himself. Especially if he uses the information provided.

Making repairs in the house, you need to give preference to natural, environmentally friendly materials. These include lining, which will look great in the interior of a country house.

If earlier plastic was used as finishing materials, now more and more people are switching to natural materials.

What material to cover the lining inside the house in the country

If you chose lining for the interior decoration of the house, then you need to be prepared that, over time, it may fade. Aesthetic appearance lost due to temperature fluctuations, high humidity and absorbed dust. To prevent this from happening, the wood must be properly processed. This will protect it from drying out and from damage by insects, and will also make it possible to carry out wet cleaning.

Material selection

The materials that are used to paint the lining can be divided into groups:

protective;
decorative.

Protective agents protect wood from rotting, drying out, fungus and insects. These include primers and impregnations, which, as a result of processing, completely penetrate deep into the canvas. When such a tool dries, then on wooden surface it is not visible.

Decorative finishes include:

How to paint lining inside the house? Because, on construction market Almost every day there are new materials, the list goes on.

The funds will differ from each other by the manufacturer, composition, price, service life and other decorative properties. Each person, having familiarized himself with the characteristics of this or that remedy, will choose what suits him best.

Let us consider in more detail some well-known paints and varnishes.

Oil paint

A distinctive feature of this material is a persistent smell, because of which many specialists refuse to work with it. Despite this, the wooden surface painted with this composition repels water well, has a distinctive sheen that lasts for almost 5 years.

It is desirable to paint on warm days in order to be able to leave the house completely open for a while. The room must be well ventilated to completely eliminate the smell. You need to work in a respirator and gloves.

Acrylic paint

This tool, compared to oil, is very expensive. Its main advantage is that it does not have a strong odor. Another advantage is that after painting, the surface dries very quickly, regardless of weather conditions and temperature conditions.

These two qualities are well worth the high price..

Decorative glaze is a transparent product, so it is very often used if you need to emphasize the texture of wood. In other cases, various colors can be added to the product - to give desired color and tint.

Acrylic scuba also has transparent base, thanks to which, after the material has dried, the structure of the tree is clearly visible. If desired, you can add color to the varnish. This material is completely unsuitable for painting the floor, most often it is used for the ceiling.

Alkyd varnish is considered a capricious material. To apply it to the base, it must be perfectly dry, then the material on it will last a long time. If the base was slightly damp, then the material, after drying, may crack. It is advisable to work with such varnish only in a dry room, observing safety precautions.

If you use oil or wax for work, then the surface of the lining will have its own real wood pattern. In addition, the surface will be alive, it will constantly “breathe”. But such a seemingly perfect coating also has drawbacks - it must be regularly applied to the surface.

Stain is used for wood if you need to change the tone of the wood. The tool is produced different colors. Before processing, the surface must first be prepared so that there are no flaws, since the product does not paint over the wood at all. If you didn’t like the resulting color, then the wooden surface can be painted again, only with a stain of a different tone. The tool needs to be painted several times on the surface, and its color will change.

Enamel opaque is used for complete painting of wood lining surfaces. Depending on the color used, in order to obtain an even tone of the surface, the product must be applied in 2-3 layers, in turn.

Varnish for lining inside the house

In our time, in construction, the following types of varnish are used:

Polyurethane.
Epoxy.
Nitrolac.

Polyurethane - the most popular and in demand. It is much cheaper than epoxy and nitrolac, and also better. The coating that is obtained as a result of painting with this material is durable. It is not afraid of temperature fluctuations, chemical and mechanical influences. In addition, such a varnish dries on the surface very quickly. It is used not only for lining and furniture, it is covered decorative items from wood and musical instruments. The only drawback of this material is an unpleasant odor and the presence of toxic components.

Epoxy varnish consists of epoxy resins and organic solvents. It has excellent quality; treated surface is not afraid of precipitation and various mechanical damage. It is used for different kind works, but its price is very high.

Nitrolac is considered the most affordable option. Despite the toxicity, the material is used only for interior work.

If you decide to paint the lining with varnish, then which option to choose is up to you. If the lining has never been treated with anything before, then the varnish must be applied to the surface several times. Each previous layer must dry well before applying the next one.

How to choose a color?

It is very important to choose the right color that will prevail indoors. This also applies to the color of the future lining. The main thing is to remember that there should not be strong contrasts inside the room.

If the panels inside the house are made with clapboard, then the walls, floor and ceiling should differ in color or shade. If the walls are painted the same color and shade, like a lining, then all the beauty of the tree will merge with the walls, and you can simply not notice it.

If in country house clapboard covers the walls of the kitchen or living room, then the ideal coating for such walls would be a range of warm shades. Experts recommend paying attention to peach, pistachio, brown or beige colors.

To paint the lining in the bedroom, shades of pink, honey or the color of baked milk are recommended. In the children's room, the colors should be bright and saturated., but scarlet, black, rich blue and purple must be taken very seriously and not overload the space of the room with them, as they are irritating to the eyes.

If there is a study in the house, then gray, green or Blue colour. Be sure to have light pieces of furniture or decor in the room, with which you can dilute the strict color.

If your country house at all small size, then you can visually enlarge it inside if you cover the lining with white. The room becomes not only bigger, but also lighter, cleaner and more comfortable. Usually, White color it is used only for ceilings, on which, if there are any defects, they are almost invisible.

Interior lining painting

Before starting work, you need to prepare necessary tools. You will need:

roller or brushes;
paint tray, bucket;
or special grinding nets;
stepladder and stool;
gloves and goggles.

First of all, you need to clean the surface of roughness and various pollution. Used for grinding sandpaper or special nets, or you can use pumice.

The second step is to impregnate the surface with a primer, which will improve the adhesion of the paint to the surface.

The last stage is the painting of the surface itself, which is produced in two or even three layers. To apply the composition to the surface, a roller or brush is used. If the room is quite large, then experienced painters recommend using a spray gun, it will be faster and easier to paint. Paint for lining for interior work purchased in special supermarkets, in advance.

If painting is done with a brush, then the third, finishing layer you need to apply a thin layer from top to bottom so that the brushes are not visible.

If the smell of paint is unpleasant to you, then you can use a respirator.

Painting lining inside the house— photos of interiors can be viewed on the Internet.

Before starting work, the selected paintwork material must be thoroughly mixed, and only then proceed to its application.

To make sure that the chosen color is exactly what you need, you need to make a test stroke on the surface of the lining, only in an inconspicuous place.

If you need to mix paints of different shades, then you need to interfere for a long time. If this recommendation is ignored, then you can get an uneven shade when staining. And it will be very noticeable if bright colors are used..

Before painting the lining, the surface must be treated with an antiseptic and special impregnation to ensure the fire resistance of the material. Only then it is opened with paint or varnish.

If before paintwork material use a primer, it may affect the color.

If indoors heat air, it is not recommended to paint the lining as the paint will dry very quickly.

If you need to save on paint, then for work you need to choose water-based semi-gloss paints. They are environmentally friendly and economical. And the color scheme can only please you with the presence of all kinds of colors and shades.

Conclusion

To have a lining inside the house is in a modern way. To prolong its life, you need to properly process it. The presented material will give you the opportunity to choose the tool that best suits your interior.

Lining materials