How to sew a mattress from synthetic winterizer. Homemade mattress - tailoring, use of natural materials

Any sleeping place provides for the presence of a mattress. Indeed, for normal rest and good sleep, the surface must be sufficiently elastic and even. There is a huge selection of such bedding on the world market, but their cost is pretty high and it is not always possible to purchase. A more affordable alternative is a homemade mattress made from various materials. Next, we will consider in more detail how you can quickly and easily sew a mattress at home with your own hands.

Choosing a filler for the inside of the product

It is quite easy to make a mattress for any bed, especially if you have certain skills in cutting and sewing. In this case, the main question remains: "Which filler to choose?".

The choice is relatively small. One of the main and relevant options is foam rubber. It is more accessible, has a comfortable texture. Elastic polyurethane foam, popularly foam rubber, is also used in the manufacture of orthopedic mattresses.

Products from this material can often be found in cribs or strollers. Since the main advantages are:

hypoallergenicity is one of the important criteria for use, especially when it comes to children's health;
hygroscopicity, foam rubber is able to absorb moisture and not create condensation. Perhaps this is the main advantage of the material;
antibacterial - prevents the development, reproduction of various bacteria and mites. It is because of this property that products made from this material are so relevant in medical institutions;
good ventilation: the structure of the foam rubber has a high porosity, this contributes to the rapid removal of moisture from the product and prevents its accumulation;
polyurethane foam has good orthopedic properties, it is quite elastic and provides the necessary fixation of the body on the surface.

However, this material is short-lived and tends to tear and deteriorate. But with the proper attitude and manufacturing of high-quality materials, the product can serve for a long time, performing its functions.

Another filler, less popular today - cotton wool.

It used to be more relevant in use, especially as fillers for mattresses, blankets and other textile accessories. However, it is not a very good option for these purposes. Wool has a fairly good primary porosity, but it is almost impossible to keep it in this form. Cotton fibers quickly lose their elasticity, and it becomes tangled and hard.

How to sew any mattress with your own hands quickly and easily

Foam rubber can be purchased at any hardware or textile stores. They are sold in rolls or sheets. You can also choose a certain thickness, which greatly simplifies the work. For example, to make children's mattresses for a crib or stroller, foam rubber is used with a thickness of 2-4 or 5-6 cm. An adult body requires at least 13 cm of thickness.

Manufacturing technology. Before proceeding with the manufacture of the mattress, you should decide on the required size. Accurately measure all sides.

Then cut out the desired size from the foam rubber.

Now you can start sewing a mattress cover - a cover. Most often, satin or calico is used. You need to cut two rectangles of the same size.

You should sum the width and length of the foam rubber and add a few centimeters for allowances, then just cut the material.

At the next stage, it is necessary to connect the material, this can be done using a sewing machine, it is difficult to do it manually, and for a long time. After stitching the cover on three sides, pull it over the foam rubber, then simply flash the remaining hole. Or, sew in a small zipper in advance, so that in the future it would not be difficult to wash the mattress cover.

If the mattress is small, then it is better to stitch with a zigzag along with the base. Wash the same together, the material dries quickly.

If a sufficiently massive mattress is made for an adult sofa, then you should take a solid base, and not trimming. To obtain the required height, several sheets should be glued together.

In this case, it is very convenient to combine several layers with each other. Get an orthopedic mattress by adding coconut bark to the layers.

The mattress is a soft bed for the bed, which can be with or without a frame. It can be of several types, but in everyday life only two are most often used - spring and stuffed. In our article, we will talk specifically about spring types, which, in turn, are divided into two types.

With a continuous weave of springs called Bonnel
With independent blocks of springs, which are considered orthopedic

The first type is more common. It is inexpensive, so it is very popular. The second type is more powerful, but also more expensive. In any case, this subject of discussion consists of a spring block or shock-absorbing parts, a hard layer, a cover and a filler. The latter is both soft and hard. As for the lining, it is better that it be made of natural fabric.

Products of this design can be found in any house or apartment. Many consider them obsolete, but this does not diminish their popularity in the least. And all because of the low cost. Mattress cushioning parts are made from a material such as hardened high carbon steel. They are connected to each other with a wire. The main disadvantage of bed elements of this type lies in the fact that they have extremely low orthopedic properties. This is because when you lie down on the bed, not one spring responds, but all at once.

Mattress with independent springs

This type is characterized by higher comfort rates. The springs for them are made of the same steel, but their diameter is smaller and the number of turns is greater. In shape, these elements often resemble a cylinder. Sometimes their edges can be narrowed. The advantage of this type is that the springs are not fixed to each other. This improves the orthopedic effect. After all, each spring reacts to pressure independently of the others.

When does a mattress need repair?

The outer skin of spring mattresses becomes unusable the fastest. But the fillers for them are made from high quality materials that have a long service life. The average service life of a spring product is fifteen years. When it loses its functional parameters, then you should not immediately throw it away. Bringing the product into proper form is not so difficult. There are several reasons why a mattress begins to need urgent restoration methods.

Skin damage
Deformation of flexible elements
Filler wear
Structural failure

But this list can be expanded with a more scrupulous examination of this subject. To repair a spring mattress with your own hands, there is no need to possess special knowledge and skills. You only need to carefully follow the advice of more experienced professionals.

Stages of the recovery process

Work on the return of the old mattress to life can be divided into several main stages.

1) Disassembly

2) Cleaning

4) Bringing damaged parts to the correct position

5) Reliable binding of shock-absorbing parts

6) Checking the parts that have been repaired

7) Product sheathing

Materials and tools

To return a worn product to its proper form, you must use the following materials and tools.

1) New decorative trim

2) Lining fabric

3) Padding material

4) Hammer

6) Furniture stapler

7) Rail made of wood

8) Strong but flexible lace

Stage 1. We clean and inspect the subject of repair

In the process of active use of the product, quite a lot of small debris, that is, dust, is collected inside it. That is why experts recommend doing disassembly on the street. If this possibility is not considered, then you will need a vacuum cleaner. With it, all surfaces of the spring product must be thoroughly cleaned. It is advisable to remove all furniture and carpets from the room in which the repair process will take place. In extreme cases, cover all objects in the room with oilcloth or similar material. Lay the product on four stable benches so that the decorative trim is at the bottom. This will allow you to approach the subject of repair from all sides. Very carefully pull all fasteners out of the mattress. After that, you need to remove the upholstery and sealant. The fabric that covers the springs must also be removed. Clean all elements with the utmost care.

Stage 2. Inspecting the details

You must release the springs from the bindings. After that, you can start pulling the nails out of the base. It is them that manufacturers use to secure the harnesses. Now you need to bring all the spring elements to a vertical position. Be careful! All springs must be the same height. All parts that do not hold firmly or are completely torn off must be securely attached to the rails with nails. Note that if the mattress springs are attached with straps, then these straps must be removed. And spring parts are fixed using nails.

In general, all straps in our facility must be eliminated. It would be better if you use regular slats instead. The latter should have a length equal to the width of the mattress. To fix them, you need to perform a preliminary markup on the body.

Stage 3. Fasten the slats

Before getting rid of the frame fastening tape, mark on its surface the places where the tape was placed. After that, you need to carefully remove the nails and remove the old straps. Now you need to prepare the slats of the desired size. Then, according to the markings made, you must carefully cut the grooves for them. After that, the rails are very carefully nailed from both sides to the base. Next, you can install the spring elements in their original position. If necessary, fix them with nails. The latter are bent on both sides to ensure high reliability of fastening.

Stage 4. We tie the springs

When the springs are securely fixed to the frame, you can start tying them. You need to drive in cloves against each row of springs. You need to bend them into hooks. At this stage, it was the turn of the laces. It is with their help that the binding will be carried out. First of all, start with a transverse row. First you must tie the outermost springs to the hooks. After that, just do the binding of the entire longitudinal row. In the process, the lace is also fixed to the transverse laces. Finishing the process, you must tie diagonally. When the tying process is completely finished, you should bend the studs all the way to the base.

Stage 5. Getting to the skin

Before proceeding with the process of lining the mattress with lining fabric, you must make sure that all important parts are installed correctly. When everything is checked, you can take on the skin. To do this, use a furniture stapler. Lay the material with a scarf in the corners to provide them with additional protection. After that, fix the rollers on the base of the lining. They can be made from the material used for sealing. To ensure reliability, the seal must be attached to the lining in several places at once. On top of all this, a decorative fabric is stretched, which is firmly fixed using the same stapler. Remember to gently pull the edges of the fabric up to avoid holes or wrinkles.

As for the orthopedic spring mattress, then resting on it is not only convenient, but also useful. But such a product also does not last forever and can wear out. But do not rush to buy a new mattress. It is possible that the old one can still be repaired. An orthopedic product is repaired in the same way as a regular one.

That's all. A product renewed and repaired in this way will serve you for many more years. The process of repairing a mattress does not require a lot of money from you. But the acquisition of a new one can cost you a pretty penny.

How to extend the life of a mattress

It is clear that one mattress for the rest of your life is hardly enough for you. Over time, it will still need repairs. But we note that the moment when there will be nowhere to go, you can postpone a very decent time. To do this, you need to use this piece of furniture with the utmost care. Try to avoid situations that can lead to damage.

You need to buy a mattress according to your weight.
Do not let children jump on the bed\
Never eat or drink while lying on the bed
Without fail, at least once a year, let the item dry and ventilate in the fresh air
The mattress should only lie in the places intended for it.
To prevent the decorative lining of the mattress from getting dirty, use additional removable covers

If you carefully follow all these simple rules of operation, then your mattress will serve you for many years, and it will take a long time to repair it. This is a guarantee that your sleep will be healthy and sound.

The article was prepared with the help of specialists from the Sleep Laboratory.
Website: http://sleep-lab.ru/ - Online store of mattresses.

Video. Spring Mattress Repair

Video. Do-it-yourself mattress repair and hauling

To increase efficiency, general well-being, the body needs quality rest. The most important aspect of a good rest is healthy sleep. What can help improve sleep quality? First of all, a comfortable bed.

The comfortable mattress gives a sound sleep and good health. Therefore, you should pay special attention to your mattress.

The right mattress will ensure a good night's sleep. Manufacturers offer an extensive selection of various materials with various fillers. Models range from the budget segment to the premium class. To take into account all individual needs, you will have to pay a large amount.

Finding a comfortable, high-quality mattress at a low price can be difficult. Sometimes it's easier to make a mattress with your own hands.

If the amount is too large for you, there is a way out - to make a mattress with your own hands. Such a solution will allow you to save money, create an ideal sleeping place for yourself, thereby ensuring a healthy, sound sleep.

A do-it-yourself mattress can be no worse than an analogue from the manufacturer.

There are several types of mattresses that you can actually make yourself. These include:

foam;
orthopedic;
from pillows.

With your own hands, you can create any mattress to your taste: even from ordinary foam rubber, even from pillows.

If you have an old worn out mattress - just get it reconstructed, it's even cheaper!

An old mattress can easily be turned into a new one - you just need to repair it with high quality and replace the cover!

Foam rubber (polyurethane foam, PPU) is perfect as a filler, it is cheap and durable. There are many varieties of foam rubber. They differ in their qualitative characteristics: density, elasticity, rigidity.

The easiest way is to make a foam mattress. You can choose the material of any suitable thickness.

As a filler, soft, elastic foam rubber is ideal, capable of quickly restoring its original shape after use. The quality of PU foam is determined by its density. The filler must have a density in the range of 25 to 40 kg/m3. For the manufacture of the frame, foam rubber with a higher density is required.

A foam mattress is the easiest and most convenient to manufacture. In order to make it, you do not need special knowledge.

When choosing foam rubber, it is necessary to take into account the product marking, choose a product with the designations EL (high rigidity, load up to 100 kg inclusive, low price; service life 5 years), HR or VE (high breathability, elasticity, soft enough, service life from 10 years).

It is important to choose the right thickness and density of foam rubber for the future mattress, as well as pay attention to the markings.

Before you start working directly, please note that for mattresses for permanent use you will also need spring blocks, for portable ones - only PPU.

In order to make a foam mattress with your own hands, you will need:

glue - you will need a special one for gluing foam rubber (it is not recommended to save on adhesive composition, cheap brands can be harmful to health);
dense foam rubber - the basis of the frame, inside which soft polyurethane foam (EL, HR or VE) will be located;
fabric for sewing the cover.

To make it, a standard set of tools is suitable: tape measure, ruler (for measurements), knife, scissors. The cover is the fastest to make on a sewing machine, but you can get by with a thread with a needle in its absence.

Prepare the necessary tools to make a foam rubber mattress with your own hands.

To understand how to make a mattress with your own hands, use the step-by-step instructions.

Decide on the sizes.
Assemble the frame. Its purpose is to give the product the desired shape. Use high-density foam (average width 7-8 cm). Cut the bars of the desired size, place them on a flat surface, generously grease with special glue at the joints.
Place the filler in the finished frame (use a single sheet of foam rubber up to 15 cm thick), after cutting out a piece of a suitable size. If you cannot find thick polyurethane foam, take thin sheets (<5 см) и склейте их между собой.

How to make a mattress with orthopedic properties

To maintain the tone of the musculoskeletal system, an orthopedic mattress is needed. The decision to make a regular foam orthopedic will add several steps when laying the filler.

You can also make an orthopedic mattress with your own hands. This will require different layers of filler.

Foam rubber and other materials are placed alternately in layers in the inside of the finished frame, it is better to use strut-fiber or coconut coir (the stiffness of the product is controlled, the smaller the layer, the softer), the layers must be carefully connected using an adhesive composition, distributing it over the surface.

Another way is to use spring blocks instead of foam rubber to increase strength, but this is more laborious and expensive.

A more difficult option is to make a mattress with spring blocks with your own hands. It will take more time and cost.

The fastest, easiest and most budgetary way to create a bed is a pillow mattress. Ideal for children's games, mobile, compact, can be placed on the floor, used as a chair or comfortable bedding.

Pillow mattress is a great option for decorating a child's room. These mattresses are easy to make.

Necessary materials:

Several pillows (quantity, size are chosen at your discretion);
Linen or pillowcases;
Scissors;
Needles and thread (sewing machine).

It takes very little time to create a mattress from pillows. You just need to choose the right material and prepare several pillows of the same size.

The product is created in two ways:

Arrange the required number of pillows in a row, measure the total length. Multiply the resulting number by 2.2 (the pillows will fit completely in the fabric). Fold the cut fabric in half, stitch (sew) the pillow sections. Place the pillows in the finished sections, then sew the edges (so that the pillows do not fall out), cut off the excess fabric.
Take the pillowcases, arrange them so that the holes are on one side, sew them together, then place them inside the pillow (if desired, the holes of the pillowcases can be sewn up).

Pillow mattresses not only fit perfectly into the interior, but are also suitable for compact storage in the closet.

How to reconstruct a stationary mattress with your own hands

Over time, any thing loses its original properties, wears out. Dents appear in the mattresses, the springs burst, the cover is torn.

What to do with a worn out mattress if you feel sorry for throwing it away? You can give it to specialists or repair it yourself.

You can get rid of these problems by buying a new one (which is quite expensive), or by reconstructing the old one.

Even a mattress with springs can be restored without outside help, although this task will be quite laborious.

You will need:

Filler.
Textile.
Thread, needle.
Scissors, knife.
If necessary: slats, springs, twine.
Hammer, large nails, stapler, staples.

Prepare the necessary tools for mattress reconstruction and follow the instructions.

Further actions depend on the degree of deterioration.

Lightweight. After opening the upholstery, evaluate the integrity of the springs. Replace some of them, tighten the other with twine. Replace the filler (if desired - a cover).
Labour intensive. You will need independent spring blocks of the right size. Lay the blocks vertically, paying attention to the level of the springs (should be the same). Fasten the lower part to rails of the same size. From the end side of the bed, drive in nails (keep to the level of the spring rows).

With a spring mattress, you will have to tinker a lot longer. But such mattresses can also be repaired independently.

When finished, tie the springs with strong twine. Start with a cross row, continue along and finish with a diagonal stitch. Cover with a thick cloth on top, on it - the desired filler (synthetic winterizer, foam rubber, etc.). The last step is upholstery, fix the material with a furniture stapler.

Follow the simple instructions, and you can easily repair the mattress without specialists!

Cover tailoring

Cover is a must for any mattress. Sewing a mattress cover will not take much time, the technology is simple and straightforward.

Sewing a mattress pad with your own hands is not as difficult as it might seem at first glance. Choose the right material and just follow the instructions.

Materials for work:

Any thick fabric.
Elastic.
Safety pin (English).
Measuring tape, pencil, ruler.
Sewing machine.

Measure the length, width of the mattress, the height of the side. You can draw a pattern on a piece of paper. The material for the cover must completely cover the top and side faces. Remember to set aside 15 cm on each side.

Carefully measure your mattress, taking into account the necessary indents and height of the mattress. This will determine how correctly the cover will sit on the mattress.

Lay the fabric on the mattress, carefully wrapping the corners, secure with a pin. Carefully remove the canvas, sew the corners on the typewriter. On the wrong side, tuck the reserved fabric, sew a hem (enough width for threading the elastic). Pass the elastic through the seam. The cover is ready.

Sewing a mattress cover takes a little time, but such a mattress cover looks no worse than a store-bought one!

How to shrink a mattress at home

In some cases, the mattress may need to be altered, for example, its size may not fit the bed, it may be too high.

When an old foam mattress is not the right size for a new bed, it's easiest to cut it off.

If there are no springs in the product, the task is extremely simple - cut the seams and remove unnecessary filler material. Carry out the work as carefully as possible. After removing the excess, sew the seams.

You can easily reduce the size of the mattress yourself. The main thing is then to carefully sew the product.

If springs are present, then to reduce the height, you will have to remove the extra spring block.

Conclusion

Making a mattress with your own hands is a very simple task, suitable for lovers of manual labor. All the necessary materials are widely available, inexpensive, and the manufacturing technology does not cause difficulties.

With step-by-step instructions at hand, you can sew a mattress of any complexity and for any budget on your own.

As a result, you get an “ideal” sleeping place that fully meets your requirements and wishes, save money, and ensure a healthy, sound sleep.

Video: Do-It-Yourself Mattress - do-it-yourself mattress FOR SO

Prices for orthopedic mattresses may seem quite high - people want to sleep on solid and comfortable mattresses, but not everyone is ready to pay big money for it.

What to do in such a difficult situation? There are three exits:

Buy a similar mattress from a little-known manufacturer;
Buy inflatable orthopedic mattress;
Make an orthopedic mattress with your own hands.

Is it really that beneficial?

By purchasing a mattress from a little-known manufacturer, we have at our disposal a product that is not much different from the products of famous brands. Large manufacturers spend a lot of money on advertising and promotion of their product, including advertising costs in the cost of mattresses. Little-known companies, as a rule, work in local markets and do not aggressively promote their products, which is why prices for mattresses are lower.

The disadvantage of this method is that some little-known companies produce extremely low-quality mattresses that cannot compete even with the cheapest models from well-known brands.

Having made an orthopedic mattress with our own hands, we will get a certain benefit. The raw materials are cheaper than the finished mattress, and we will have practically no additional costs. Depending on the cost of materials, we we can save up to half the cost of the finished mattress. Let's figure out what we need to make an orthopedic mattress with our own hands.

In order to make an orthopedic mattress on our own, we need raw materials - the main budget will be spent on their purchase. We will manufacture a springless mattress, since it will be quite problematic to purchase blocks of independent springs, and classic spring blocks will not add orthopedic properties to our mattress.

To make a mattress we need:

Dense polyurethane foam for lateral support;
main filler;
Dense material for the manufacture of the cover.

Dense polyurethane foam, laid along the edge of the mattress, will play the role of a holding box. Thanks to him, the mattress will keep its shape well. And in the middle of the mattress there will be a filler.

As a filler, we can choose all the same polyurethane foam. It is advisable to get a solid piece, suitable both in thickness and in the dimensions of the sides. If there is a desire and opportunity, you can try to look for coconut fiber, laying it in turn with polyurethane foam. The result is a mattress of increased rigidity that is useful for the spine. We can also design a mattress with different rigidity of the sides - on one side there will be coconut coir, and on the other - polyurethane foam.

Together with polyurethane foam, we can use a dense struttofiber material. It has an interesting structure with vertical fibers and provides decent support for the spine. This material should be placed on the top and bottom, and in the middle we can lay polyurethane foam or a mixture of polyurethane foam with coconut boards.

As for the cover, here you should give preference to dense natural fabrics. For example, it can be coarse calico or natural linen.

The most difficult to get filler materials - this will be the most difficult part of the mattress manufacturing process.

Let's start making a mattress

Making an orthopedic mattress with our own hands, we need to prepare the tools:

sewing machine;
Roulette;
Scissors and a sharp knife;
Glue.

We need a sewing machine to sew a cover, a tape measure is needed to measure materials, and we will cut our fillers with scissors and a sharp knife. As for the glue, it is necessary for gluing individual layers of fillers together - here we need some kind of glue that is safe for health and does not emit harmful toxins and odors. Recommendations on this matter can be obtained from a furniture repair shop.

Before starting work, you need to measure the dimensions of your bed- they will be equal to the size of our future mattress. After that, we proceed to the assembly of a frame made of dense polyurethane foam, which will provide support for the filler from the sides and help the mattress keep its rectangular shape. For this we use dense polyurethane foam with a thickness of 50 to 100 mm. The approximate thickness of the mattress should be 14-15 cm - a smaller thickness will not add comfort.

The next step is the laying of the filler. If you were lucky enough to get a solid piece of polyurethane foam of a suitable thickness, measure the dimensions of the free space in the resulting frame, and then cut out the appropriate piece of polyurethane foam - here you will need a sharp knife, for example, a clerical or shoe knife.

If you decide to use a combined filler, then individual sheets of stuffing will need to be glued together so that the finished mattress is dense and does not “walk” under the weight of a person lying on top. To do this, we use a safe, odorless glue, otherwise it will be simply impossible to sleep on the mattress.

Did you manage to get only thin polyurethane foam? It doesn't matter - glue the individual layers into a single structure with glue. But do not try to use trimmings and small pieces of polyurethane foam for stuffing - the base of the mattress should be closer to the monolith, and not consist of miniature elements, like a cheap foam model.

After the stuffing is ready, we place it in our frame and proceed to sewing the cover. To do this, we measure the resulting mattress and measure two pieces of fabric - do not forget to leave a margin for the seams and the thickness of the side parts(Approximately 3 cm is allocated for the seams on each side). The cover should turn out to be quite dense - it should be put on the filler with a frame with some difficulty in order for the mattress to turn out to be strong and elastic. The seams of the cover must remain inside.

For tailoring of a cover only natural fabrics and dense threads are used. Natural fabrics will ensure the absence of allergies and irritations, and strong threads will ensure the durability of the manufactured cover. It is possible that you will need someone's help to stretch the cover. After stretching, the cover must be sewn up (if necessary, we sew a zipper on one side).

By the way, it will be a permanent cover, non-removable. Therefore, it is recommended to sew a removable cover over it, equipped with zippers around the perimeter or on two adjacent sides - at any time this cover can be removed and sent to the wash. If you are too lazy to bother with another cover, buy a mattress pad, but in this case you need to be prepared for additional costs - the cheapest way is to sew the cover yourself.

After the mattress is ready, you need to let it ventilate a little in the open air - for this you can take it out to the balcony or loggia, where unpleasant odors will disappear from it.

In closing, here are some tips:

Accurately measure the dimensions of the components and the dimensions of the bed - the mattress should be tight, not falling apart. Yes and in its place, it should lie tightly, without moving to the sides;
Do not make mattresses from foam rubber and batting - these materials will not allow you to create a mattress with orthopedic properties and anatomical effect;
Do not use synthetic fabrics for sewing covers - they can cause allergic reactions and irritation;
Do not use Bonnel spring blocks for self-manufacturing of orthopedic mattresses - it is almost impossible to create normal mattresses with orthopedic properties on their basis.

None of us can imagine how one can indulge in sleep and rest on bare earth or a hard wooden bed. Modern man is accustomed to the fact that his body should lie on a soft basis of one kind or another.

Most of the time we sleep on a mattress. Today we will reveal the secret of how you can make a mattress using various natural or artificial materials with your own hands.

If in the last century the basis of this product was mainly various fillers of plant or animal origin, then in a modern mattress the main component is a spring. It is she who provides comfort and convenience.

What types of this wire element can not be found in modern beds. Each manufacturer is constantly striving to prove that it is his development that most fully takes into account the characteristics of human forms and allows the body to take the most advantageous position in terms of relaxation.

And there are more and more enterprises producing these products for the modern market. The most responsible of them really spend a lot of money on studying the features of the operation of springs of various shapes, select their optimal ratio per unit area, and experiment with various artificial and natural fillers.

Making a mattress using natural materials

At the same time, one of the main negative aspects associated with limiting the consumption of new generation mattresses is their rather high price. We bring to your attention a budget version of a product that you can make yourself for a private house or cottage, using both traditional and not quite traditional, or materials forgotten over time.

We start the process of making a mattress with a fabric base - a cover of a certain size, which we will stuff in the future. For sewing the shell, it is necessary to prepare a sufficiently strong fabric. At the same time, it can be either traditional white or any other, since the operation of the mattress is often carried out using bed linen.

From the prepared fabric, make a pattern for the details of the future home-made product. It will consist of two absolutely identical rectangular parts, the dimensions of which will depend both on the dimensions of the people who will use the product, and on the type of bed. Recall that the width of modern beds are divided into single, one-and-a-half and double. Based on this, cut out the upper and lower halves of the mattress. In addition to them, prepare one or more narrow strips, the width of which will determine the height of the product, and the total length should not be less than the perimeter (the sum of the lengths of the sides) of rectangular parts.

The cut parts must be connected to each other. To do this, first grind them with pins,

baste and sew with high strength threads. It is best to first perform this operation manually, securely fixing the parts together to prevent their mutual displacement.

This is necessary to achieve high quality work. And a strong thread will help to achieve maximum wear resistance of the junctions of the fabric and the entire product as a whole. Of the most commonly used, it can be recommended to use a linen seam for these purposes.

Don't try to put all the pieces together. Remember to leave one short side open. It will be needed to fill the mattress. It is best to make a neck in this part, which is locked with a zipper or buttons.

Traditionally, the mattress assumes the most magnificent form. To achieve this goal, a large list of different materials can be recommended for use. Remembering the fairy tale about the princess and the pea, try stuffing our product with down or feather. Given its required quantity and the price of such materials, the cost of such a product will many times exceed the cost of the most expensive factory product. Instead of poultry products, you can use another natural material - a livestock product - sheep wool. It is also able to retain volume and has very high heat-preserving properties. Such a product can be made only for the winter cold period and if there is a sufficient amount of wool.

We suggest paying attention to one, perhaps the cheapest, but not the worst material for stuffing a homemade mattress - hay. It is a high-quality dried young herbs with an unforgettable natural aroma. And if you add 5-10% of dried mint, hop cones and other soothing plants to its composition, sleeping on such a product will bring you an unforgettable vacation.

The choice of filler for the mattress

To stuff the cover, we recommend using a large piece of clean plastic film, on which we lay the future mattress and gradually tamp the dried herbs into it. The use of straw or mature grass for these purposes is not advisable, as tough stems can spoil the whole feeling of relaxation.

It is best to work on stuffing the mattress with work gloves and clothes with long fastened sleeves. Otherwise, you can not avoid small scratches that appear in many on your hands.

If there are processing agricultural enterprises in the immediate vicinity of your location, you can stuff the mattress, for example, with buckwheat husks or other similar material.

Instead of a natural filler, you can also use chemical products in the form of a recently appeared substitute for wool - synthetic winterizer. It is light, soft and non-allergenic.

After completing the above steps, you will become the owner of a unique product that will give you an unforgettable vacation and arouse the interest of your acquaintances and friends.

Dear readers, comment on the article, ask questions, subscribe to new publications - we are interested in your opinion :)