Quartz vinyl floor tiles. Best Quartz Vinyl Flooring

Quartz vinyl tile only indirectly applies to vinyl flooring: the composition is dominated by quartz sand - up to 80%. Only 15-20% is accounted for by polyvinyl chloride and other synthetic additives. Thanks to this, the material is incredibly durable, practically does not wear out over time. At the same time, PVC film makes it possible to imitate the texture of wood, stone, marble or porcelain stoneware.

Structure of quartz vinyl tile

A typical quartz vinyl consists of 5 layers:

1. Base. Polyvinyl chloride base.
2. reinforcing. Balance layer with the addition of fiberglass. Prevents deformation.
3. Quartz vinyl. Quartz selected sand with PVC. Strength, additional soundproofing, durability.
4. Decorative. Special film patterned or textured floor covering.
5. Protective. Transparent polyurethane layer. Protects the surface from damage.

The structure of quartz vinyl tiles is similar to other types, however, due to the presence of a reinforcing layer and quartz sand in the composition of the product is much stronger, have improved performance characteristics.

Application of quartz vinyl

PVC coating with the addition of quartz is used in rooms with temperature fluctuations from -30 to 60°C, with any traffic intensity and humidity level. Thanks to this, and also given the variety of designs, the use of quartz vinyl floor tiles is almost unlimited!

public institutions

• offices;
• hotels;
• training and medical institutions;
• shopping galleries;
• entertainment centers;
• restaurants, cafes.

Apartments and country houses

• kitchen, dining room;
• living room;
• bedroom, children's;
• balcony or loggia;
• terrace;
• veranda;
• utility room;
• bathroom.

Benefits of quartz vinyl floor tiles

wear resistance

Durability is the main quality inherent in quartz vinyl, but coatings are also scratch resistant, not afraid of female heels, and tolerate moderate physical damage, for example, a dropped object.

Abrasion resistance

The multilayer structure of quartz vinyl in combination with polyurethane on the front surface provides reliable protection from abrasion: in this component, quartz vinyl tiles are in no way inferior to parquet board from natural wood or laminate.

moisture resistance

Like PVC laminate, quartz vinyl floors do not allow moisture to pass through, the seams are sealed. Due to this, the base remains dry, delamination or deformation over time is excluded.

Durability

Regardless of the operating conditions, correct styling and choice quality material, service life - not less than 25 years. At the same time, quartz vinyl tiles do not require special care, and if necessary, fragmentary repairs are allowed.

Operational installation

The base base practically does not require preparation - it is enough to clean the surface of debris, level it. Suitable for use on concrete, wood, old linoleum or on tiles. Depending on the models, quartz vinyl is glued or installed using locking systems.

chic design

The front surface of the quartz vinyl floor tile imitates natural materials. It uses screen printing, the texture is clear, high quality.

Features of systems for laying quartz vinyl flooring

Glueless lock

Adhesive system

For laying PVC tiles, a special one is used; in some cases, the use of double-sided tape is allowed. Also, some models have a self-adhesive base. Collections , are ideal examples of quartz vinyl adhesive tiles. Instructions for .

We offer professional installation of quartz vinyl flooring at affordable prices in Moscow and the Moscow region.

Quartz vinyl tiles - perfect solution for rooms with increased loads, as well as in places with high humidity, sudden changes in temperature. Experienced consultants of our salon will help you choose the right collection for a particular room. Contact us best solutions for floors from the world's leading manufacturers!

Inspiration - quartz vinyl flooring in interiors

Promotional offers from the salon "Polov"!

Click on the banner to learn more about the promotional offer.

Quartz vinyl flooring is a durable and resistant floor covering, which until recently was mainly used for finishing industrial premises. Today, quartz vinyl floor tiles are often used for arranging apartments. Consider what this material is, what advantages and disadvantages it has, as well as possible options finishes.

Quartz sand is the main component that makes up most of the tiles (depending on the features of the model, from 60 to 80%). The rest is various impurities that are added in order to obtain certain additional characteristics and properties of the resulting product.

So, the main characteristics of the tile - strength, resistance to fire and water, are present precisely due to quartz sand, while all kinds of plasticizers, stabilizers and pigments, in combination with vinyl, serve only as an addition. Plasticizers provide a certain flexibility of the material, which makes it easier to install.

Stabilizers provide protection from exposure to light and elevated temperatures, but all kinds of colors are available by adding pigments. At the same time, the use of special additives even allows you to create imitations of any textures.

Features of preparation various types surfaces. How to grout seams on tiles. Criteria for choosing floor tiles.

But if homeowners decide to resort to the first method, then you will need to purchase a high-quality adhesive composition, which can be made on the basis of rubber or acrylic.

Useful advice! In order to avoid any problems associated with the quality of fixing the elements, it is recommended to purchase the adhesive composition that the tile manufacturer recommends for use.

The laying procedure is carried out according to the following algorithm:

1. Preparatory work, including the dismantling of the old coating and leveling the base. It is also necessary to putty all cracks and crevices, or you can simply make a new screed.
2. After that, they go directly to laying the tiles, which begins with the markup. Initially, you need to mark the starting point and the laying lines of the elements.
3. Then it remains only to apply the adhesive composition to the floor surface and lay the tile elements, carefully going over the top several times with a roller to smooth the coating. Trimming of corner and edge elements is carried out immediately before laying them to avoid discrepancies.

Important! All excess adhesive must be removed before the composition dries. Otherwise appearance floor may be damaged.

In addition, experts recommend observing as much as possible comfortable conditions for laying this material, including the dryness of the base (no more than 5-6% humidity). It is not worth laying tiles on a surface with an adhesive composition immediately, but only after waiting a few minutes. It is also worth paying attention to the recommendations that the manufacturer himself provides, since the instructions usually offered for the material contain all the nuances necessary for high-quality installation and further operation.

Secrets of installation and further care of the coating: expert advice

In addition to the basic laying rules that must be observed during the work process, professionals recommend paying attention to some not so obvious, but no less important aspects:

• perfect time to dry adhesive composition on the surface before laying tiles - 30-40 minutes;
• if the flooring involves the presence of a pattern, you should always start laying from the center of the room. If the tile is plain, then you can start from the door;
• if during the laying process there are any obstacles on the way that need to be bypassed, for example, a staircase or a column, then cut the tile to right size you can use a regular knife;

• all figured holes in quartz vinyl tiles are made using a special pattern, which must be prepared in advance;
• it is not recommended to proceed with laying tiles immediately after purchasing them. It is better to wait at least 48 hours so that the material can adapt to the conditions that exist in this room. In this case, the tiles should not be removed from the package;
• if planned self-laying, then it is best to prepare in advance all the tools necessary for work, including: a sharp knife, a simple pencil, a notched trowel for applying glue, a square and a special roller that will eliminate air bubbles from under the tile;
• it is considered that concrete base- a poor base for laying quartz vinyl tiles. This is due to possible difficulties in the future, if dismantling or replacement of individual elements is required;
• since the material does not tend to expand as a result of rising humidity, there is no need to leave gaps between elements or indents from the wall.

Important! Particular attention is required when laying the coating in the event that a floor heating system is provided. In this case, it must be turned on at least 10 days in advance to allow the floor to warm up. In the process of working with glue, it is worth keeping the temperature around 18 degrees. It must also be preserved for at least three more days after laying. After that, the heating can be turned off until a real need arises.

Quartz vinyl tiles: reviews. The whole truth about the use of material

In the process of considering information about what quartz vinyl tile is and what are the advantages of its operation, one has to deal with an abundance of conflicting opinions regarding this material. Someone enthusiastically praises the simplicity and ease of use of this coating, while someone points out the shortcomings. Consider what opinions exist, and what you should pay attention to before making a choice.

“The tile was laid about a year ago, so we managed to evaluate it throughout all seasons: both in summer and in winter. In the summer, of course, there were no problems at all, but when the cold came, I definitely didn’t want to walk barefoot. But in principle, this is quite solvable by the presence of warm socks or slippers.

Margarita Tyumentseva, Moscow

Due to the fact that quartz-vinyl tiles have moisture-resistant properties, an additional waterproofing layer is created under the coating.

“When I was renovating, I bought PVC tiles for the walls of the bathroom, and vinyl for the floor, because I read that it resists water best of all. And this is true, because several years have passed and there is no damage.”

Oleg Lazanov, Yaroslavl

“For a long time, only the installation technology stopped me from such an acquisition, since locking joints are rarely of high quality, and if possible I try to refuse them, and I was reluctant to mess with glue. Therefore, he pulled the change of flooring as best he could. As a result, laziness won, and yet he put quartz vinyl tiles on the locks. No problems so far, but it's only been 8 months, so we'll see."

Vadim Satsky, Voronezh

“For the first time I got acquainted with this material from friends. They had self-adhesive vinyl wall tiles in their bathroom. We liked the price they gave us. But my wife read on some forum that quartz vinyl floor tiles are unhealthy. Of course, there is no real evidence for this, but just in case, we still decided to abandon the idea. ”

Ruslan Chervorukov, Belgorod

As can be seen from the reviews, quartz vinyl tiles are not to the taste of every owner. Someone considers it not warm enough and cozy for use in an apartment. Well, someone is attracted by its stability and long service life. In any case, the decision remains with the owner, and having considered all the technical aspects of such a solution, as well as reading reviews about quartz vinyl laminate, one can come to one or another conclusion about the appropriateness of its use.

How to care for quartz vinyl tiles

Ease of care is one of the main advantages of this material, so you can use any available funds: broom, vacuum cleaner, water, any household chemicals. Moreover, serious soiling can be easily removed with a hard sponge, which will not damage the integrity of the coating, but will remove any difficult stains.

After getting acquainted with all the characteristics and reviews, quartz vinyl floor tiles can leave an ambiguous impression of how successful such a solution can be called. But practice shows that this option is worthy of consideration on an equal basis with others, especially if it is necessary to finish rooms with high traffic and serious loads on the floor.

Some people confuse quartz-vinyl tiles with ordinary PVC (polyvinyl chloride), which is why they believe that this material is not very environmentally friendly. Why this is so is not very clear, because we all grew up on PVC floors, which were used to decorate Soviet apartments and nothing, everyone is alive and well.

Read the article and you will find out how unhealthy quartz-vinyl floor tiles are, what it is in general, and also how it differs from other floor coverings.

What is quartz-vinyl tile made of?

As shown in the photo, quartz tiles consists of three layers and polyvinyl chloride, which everyone is terribly afraid of - at the very bottom. Then comes quartz sand, a very safe and environmentally friendly thing, and this "sandwich" is covered with a polyurethane film.

So, what should you be most afraid of? Here is the same polyurethane film. But is it worth it? After all, this material is used everywhere, not only for the manufacture of building and finishing materials, but even clothing (for example, eco-leather for jackets) and condoms, moreover, for those people who are allergic to latex.

Yes, if you really delve into and lay out the material on the periodic table, you can get scared. See what elements are there:

• Arsenic
• Phosphorus
• Phenol
• Tertiary amine

This is so, not even a fifth of the entire "batch". But, if you look further, it turns out that all these substances can be harmful in one case: if the material is heated to 200 degrees. And how is this possible in ordinary apartment? No way.

Even at the very good heating in winter, the air temperature will not rise to a critical level, at which fumes will begin to be released from polyurethane and kill you.

The same goes for polyvinyl chloride itself. It is also safe until it gets too hot, at which point phosgene and cyan are released. So, you should not just heat it up to 200 degrees, and that’s all (the “warm floor” system also does not produce such a temperature).

How is it different from regular PVC?

Surely, many of you remember Soviet-made PVC tiles: pink and green squares that were used to decorate all new buildings of that time. It was a very durable coating, you will agree.

The only thing that was bad about this tile was that it burned out and was afraid of hot. That is, if you accidentally leave a curling iron on the floor, the coating melts.

But quartz-vinyl tile is fire resistant and certainly does not deform from a curling iron. As for fading in the sun, it all depends on the manufacturer and on the presence of a protective, ultraviolet layer. If you take a tile from a reputable company, it will retain its original appearance for twenty years (however, Soviet PVC tile also burned out very slowly).

Myths about quartz-vinyl tiles

In addition to fears about "ecology", quartz-vinyl coating overgrown with myths. No wonder. Any new material in the market - a blow with a sickle to ... competitors. So they spread rumors with incredible speed in order to neutralize the enemy, who encroached on their part of the clientele.

Therefore, before believing any popular opinion, you should carefully read and search for information, and then draw conclusions.

So, what are the myths about quartz-vinyl at the hearing of the people?

Myth 1: Quartz vinyl is short-lived and soon sand falls off the surface.

That's just sheer nonsense. Sand is sand, but we are talking about stone sand, quartz. And quartz is the most durable mineral in the world, after diamonds, of course. And it is pressed with the help of plasticizers, which do not collapse for 15 years, at least, or even all 25. Is this a short service life of the floor covering?

Myth 2: This coating is cold because it is made of stone.

But besides the stone, there is also a substrate - PVC (half-rubber), quartz sand there - a very small layer and everything is covered with polyurethane on top. That is, it is not quartz sand that adjoins the screed, but rubber, which means that it cannot hold all the cold of concrete upstairs.

And from above, such a tile cannot become cold in any way, since the temperature in the room, as a rule, is 25 degrees and the material “gains” exactly this temperature, and not cement.

Quartz-vinyl tiles are even warmer than laminate!

Myth 3: Quartz-vinyl tiles are not compatible with underfloor heating.

Everything is compatible. To heat up the vinyl before the fumes go out, it must be set on fire! And if we are talking about the fact that it is deformed by temperature changes, this is also past, since this material is plastic, unlike the same tree, which warps from heat and frost.

Myth 4: This tile scratches just as easily as linoleum...

And in general, quartz-vinyl is the same linoleum, only cut into pieces.

No. It's perfect different materials and it's not fair to compare them. Quartz-vinyl tile is very durable, it is not "afraid" of heels, scratches and furniture legs, unlike linoleum.

In terms of strength, this coating, rather, can be compared with a laminate. That is, such a tile is a soft laminate, roughly speaking.

Myth 5: Such a tile can burst on impact.

They think so because it consists of pressed stone sand. But, due to the fact that the sand is mixed with plasticizers, there is a soft substrate on the bottom, and a strong one on top. protective film, these tiles are simply impossible to break. And they don't crack when hit.

As you can see, in all respects, quartz-vinyl tiles are simply a wonderful choice for a kitchen.

She is not afraid of any blows, scratches or water.

And at a cost it comes out a little cheaper than ceramics, and it’s more pleasant to walk on it.

Myth 6: It's hard to style on your own.

No, it's very easy to put it on. She has castle structure, like a laminate, but at the same time it bends and can be cut with a simple construction knife.

What to look for when choosing

When choosing quartz-vinyl tiles for the kitchen, first of all, pay attention to the manufacturer. If you take goods from an unknown company (Chinese, for example, from the market), then such a tile can be not only of poor quality, but also harmful.

Because, in the case of China, you can never be sure what their "quartz-vinyl" is made of. It can be a completely different composition, outwardly similar to quartz-vinyl, which poisons you with phenol and without any heat.

See certificates, buy in building markets, give preference to companies that have been on the market for more than a decade, for example, Tarkett, Finefloor. These factories have been producing quality flooring for decades, so they should be trusted.

Quartz-vinyl tile - a good choice for finishing the kitchen floor both in the apartment and in a private house. If you are planning a renovation, be sure to consider this option, as, judging by the reviews, this is a worthy thing.

It would seem that all pvc tiles look the same.
However, vinyl tiles also have a classification - there are 2 main types of tiles. These are quartz-vinyl and vinyl tiles. They are somewhat similar, but there are also a number of significant technological differences. This will be discussed in the article.

Vinyl and quartz-vinyl tiles: Differences and features.

Quartz-vinyl tile

Quartz-vinyl-based floor tiles are a new generation of polyvinyl chloride (PVC) flooring. The main difference in composition is the presence of quartz sand. The last component is not so small - as much as 60-80%, while PVC and various additives - about 20%. Quartz-vinyl tiles are closer in origin to the mineral quartz than to PVC. This gives the tile strength, almost zero abrasion, fire safety, moisture resistance. The presence of polyvinyl chloride in the composition allows you to imitate any materials, as well as their texture.

Quartz-vinyl tile is multi-layered:

First, upper layer is a transparent durable polyurethane, this layer protects the tile from scratches, deformations, abrasion;

The second visible layer is a decorative film. She is responsible for the coloring and pattern of the flooring;

The third layer consists of quartz vinyl. It is basic and gives the coating its main properties: strength, sound insulation, moisture resistance;

The fourth layer performs a reinforcing function and consists of fiberglass. Glass fiber forms the structure of the coating, makes the tile resistant to deformation;

Fifth, base soi is made up of vinyl.

By production of a quartz vinyl tile harmful substances are not used. This distinguishes quartz vinyl tiles from linoleum, in the production of which plasticizers and foam concentrates are used. No wonder, as you know, linoleum has a strong bad smell, which is associated with the release (emission) of enough substances from it. So, quartz vinyl tile is an environmentally friendly material!

Vinyl tiles

In vinyl tiles, the calender backing is a pvc layer made by successive rolling through a roll system. This technology allows you to get a fairly thin, but at the same time dense material. The base also plays the role of a heat-insulating material. Also, fiberglass is used in the structure of vinyl tiles, thanks to which the tile does not stretch or shrink. decorative layer vinyl tiles gives a lot of colors, a relief transparent layer, protects the surface from damage. There is no quartz sand in vinyl tiles. In general, the production of vinyl tiles is similar to the production of commercial linoleum.

Pros and cons of pvc tiles:

Floor tiles have antifungal and antibacterial properties

Due to its unique structure, the tile dampens the shock load on the human spine when walking or during physical exercises, and also has a high injury safety. For these reasons, it is placed in children's rooms, as well as in gyms.

The tile is not afraid of water, even boiling water. It does not change its geometric dimensions, does not swell and does not allow water to leak at the joints. This property allows the use of tiles in the "wet areas" of apartments and houses, as well as in the decoration of residential areas of sea and river transport

The tile is easy to install, does not require special tools and skills

Repairability of PVC tiles - very quickly damaged vinyl tiles can be easily replaced with the same tiles. At the same time, the work is carried out silently and dustlessly. To do this, you do not need to dismantle the entire floor, as is the case with laminated floors, the replacement of one tile is local and does not require the dismantling of the entire coating. This feature makes the coating very durable, while maintaining an impeccable appearance.

Water resistance. The tile is not afraid of water and aggressive detergents, has 43 class of wear resistance.

Impact resistance - floor tiles are not afraid of shock loads, even if a heavy object falls, it will remain intact.

Excellent decorative properties - a large number of colors and decors, the possibility of combining tiles different manufacturers and creating a tile pattern.

During installation adhesive coatings it is not required to leave gaps and thresholds between rooms, which significantly improves the appearance of the premises.

The main disadvantage of vill and quartz-vinyl coatings is that PVC coatings are very thin and repeat all the unevenness of the floor; before installation, you need to pay a lot of attention to the screed. The floor must be perfectly flat, otherwise pvc tiles can repeat all the irregularities of the base. Also of the minuses, it is worth noting its artificiality. It cannot boast of high aesthetic properties, which are so valued today. It does not have the nobility of wood, the tactile sensations when walking on tiles are completely different.

On our site you can find pvc tiles for every taste and color.

We offer a huge selection of manufacturers of quartz vinyl tiles (Art tile, DeArt Floor, Refloor, Decoria, Fine Floor, Orhid Tile, Vinilam) and vinyl (Tarkett New Age, Lounge, Jazz).

Quartz vinyl flooring is an innovation in the world of building materials used in flooring. The new kind finishes quickly became popular due to ease of installation and durability.

Peculiarities

Quartz vinyl tiles are a special type of flooring that is endowed with qualities ceramic tiles and linoleum at the same time. Strength and ductility - this is its main features. Also of particular interest is the structure of the tile, which consists of several layers that are combined into a single whole by thermal pressing.

Everyone has it building material have their own characteristics of gluing, painting or styling.

Before you start laying, you need to prepare the floor: mechanically clean it from debris and dust, and also complete the dismantling of the previous coating.

This is followed by the process of leveling the floor, if necessary. This can be done using acrylic putty. The main requirement for the surface is perfect smoothness, otherwise all work will be in vain. The humidity of the floor on which the tiles are laid should not exceed 5%.

pros

If we talk about the benefits of innovative flooring, then among them the following points should be noted:

• Increased material strength and high wear resistance. Long service life, 15 year manufacturer's warranty.
• The tile is very pleasant to the touch, gives a feeling of warmth and comfort when walking.
• At high temperatures(from 40 to 60 degrees) does not emit substances harmful to the body. That is why it is often used in the process of arranging underfloor heating in an apartment.
• Non-slip and non-absorbent surface, moisture resistant. Ideal flooring for kitchen, bathroom, toilet, swimming pool.

• Frost resistance allows the tiles to be used outdoors, for example, on a balcony, veranda or garden path.
• When walking, there are no extraneous sounds that can be heard while walking on a floor covered with ceramic tiles.
• High chemical inertness and low risk of fire allow the use of quartz vinyl coating in garages.
• Resistant to mechanical damage that can be restored.
• Wide range of textures and materials. You can easily pick up a pattern that imitates stone, wood, grass and more.

Minuses

Each building material has its drawbacks. For quartz vinyl tiles, they are as follows:

• The coating is laid only on perfectly flat surfaces, otherwise the effect of “waves” may result.
• Increased softness of the material. Because of this, dents or marks from heavy objects may remain on the tile.
• Among the manufacturers of this finishing material many unknown brands. Often there is a poor quality coating that quickly delaminates and fades in places where the sun's rays fall.

• High price point.
• Despite the lack of selection harmful substances, the tile consists entirely of artificial materials.
• Often there is a pattern mismatch.
• The severity of the finishing material: 1m2 weighs about seven kilograms.

Types and characteristics

Based on texture and color palette finishing material, it is divided into two groups:

• Floor covering in the form of a tile. Square tile meets different sizes: you can meet 30x30, 60x60 cm, and if it is a rectangular shape, then - 60x30 cm. The thickness can also be different: from 1.5 mm to 5.5 mm.
• Floor covering in the form of plates which is similar to laminate. As for the shape of the dies, most often manufacturers have one size option - 122x18 cm with a thickness of 2.5 to 5.5 mm.

If we take into account the installation method, then the quartz vinyl coating is divided into the following types:

• Finishing material that is fixed with glue. Adhesive mounting- a method suitable for square tiles.
• Tiles with interlocking joints.
• Quartz vinyl coating with self-adhesive backing. From the wrong side, the protective film is carefully removed, under which there is a layer of glue. It is enough just to press the adhesive side well to the floor, and the tile will be securely fixed in the right place.

If we take into account the abrasion of the floor covering, then it is also divided into classes. For use in an apartment, material of class 31-33 is usually chosen.

For public places, where there is high traffic, you need tiles with more high class wear resistance - 34-43. In the house, for example, for the hallway, perfect choice there will be a coating whose wear resistance class is 34. The same flooring is also suitable for a water-heated floor in a house.

The higher the wear resistance class, the better such a quartz-vinyl coating.

Quartz vinyl coating consists of five layers:

• The base layer (lowest) is based on PVC (polyvinyl chloride). It provides reliable adhesion of the tile to the base surface.
• Glassfiber (fiberglass) - a layer that performs a reinforcing function.
• A formation containing vinyl and quartz (quartz sand). They provide the material with strength and thermal insulation.
• A decorative layer that creates texture. As a rule, this is a drawing applied using photo printing.
• The last (topmost) layer is a polyurethane layer containing aluminum oxide. This oxide prevents various mechanical damage tiles and eliminates slip.

In addition to the main components included in all five layers of quartz vinyl tiles, several additional components are allowed:

• dyes;
• plasticizers;
• stabilizers;
• lubricating ingredients.

Despite the multi-layer, the coating is quite thin - its thickness is about four millimeters.

The production technology of the tile itself belongs to the Japanese, and the leader in the production of this moment is Korea. If we talk about the scope, then the quartz vinyl coating can be used in almost all rooms where the air temperature is not lower than -30 and not higher than 60 degrees. Given that there are no melamine or phenol resins in quartz vinyl, which are harmful to human body, it is recommended to lay tiles based on it on the floor in children's rooms.

How to choose?

When choosing a quartz-vinyl coating, it is necessary, first of all, to determine the wear resistance class of the material. For some rooms, 33-34 will be sufficient, while for other rooms, a material with a wear resistance class of 43 will be required.

If you have to choose tiles yourself, then you need to pay attention to brands that have proven themselves in the building materials market.

These include the following manufacturers:

• Finefloor;
• Vinilam;

• stepclick;
• Aquafloor;

• Armstrong;
• Rikett Flooring;

• Art Tile

Among Chinese manufacturers, Wonderfull Vinul Floor has proven itself well.

Also, when choosing, you should pay attention to the method of installation of the coating, on color scheme and the texture of the material, which helps to translate into reality various non-standard solutions designers.

It should be remembered that buying a suspiciously cheap tile can harm your health, since it is made from recycled materials.

How to mount?

Before installing the floor covering, prepare tool kit including the following accessories:

• pencil;
• roulette;
• marking cord;

• sharp knife;
• metal square;
• putty knife;

• roller;
• sponge;
• construction level.

Stages of laying square quartz vinyl tiles:

• Before the installation process, you need to let the material lie down for several days in the room where it will be used.
• Applying markup. This is done using a conventional coated cord: the surface is divided into four even parts.
• Then glue should be applied and allowed to dry for half an hour. The adhesive is applied with a special notched trowel. Laying correctly start from the entrance to the room and move towards the center.
• Control over the laying process must be carried out using the previously applied clear lines.

• Laying tiles and fixing them with a pressure roller. In this case, it is necessary to remove excess glue and air bubbles.
• For tiles with a pattern, there are indications from the manufacturer on back side to understand the stacking order.
• Tiles should be placed tightly, square to square.
• When the work is completely done, you need to use a sponge soaked in ethyl alcohol to remove glue residue.

You can walk on the new floor immediately, and you can place heavy objects (furniture) on it after a few days. It is recommended to wash the floor from excess dust later: after 5-6 days.

Reviews

After a small analysis of customer reviews, craftsmen working with quartz vinyl coating, we can conclude that it attracts the consumer, despite the high price segment. This is due to the fact that the tile does not crack, does not break, even when heavy objects fall on it. Also, buyers like the fact that, thanks to a wide range of imitation textures various materials you can find many interesting and unusual options e.g. for marble, granite, slate or natural wood finishes.

Some people have difficulty laying tiles, but it pays off with many other positive qualities floor covering. The most popular tile shapes are square and rectangle.

A floor made of a finishing material based on vinyl and quartz sand will give the owner of a house or apartment a reliable floor covering for many years that can withstand temperature fluctuations and is not afraid of high humidity. Just enough to take good care of it.

Beautiful examples in the interior

Tiles with many various decors fits perfectly into any design fantasy where mixing is allowed different styles and directions.

Most often used quartz vinyl coating in bathrooms. The style is usually chosen according to the wall decoration. The tile imitating marble looks beautiful.

Large rooms and living rooms - these are rooms where tiles with imitation of natural wood look good.

For the kitchen, especially if it is spacious and bright, a tile imitating some kind of stone is suitable. If the interior is dominated by classic style or modern, then the texture of the wood on the floor will look beautiful. Modern style involves a floor laid out in two colors of tiles, for example, black and white.