How to hide the wires from the TV. How to hide the wires from the TV on the wall - simple solutions against non-standard ideas

A cord sticking out in plain sight can negate all the efforts of designers. Before hanging the TV on the wall, consider how to mask the cable system so that the wires are not conspicuous. Let's consider different options for solving the problem.

Wires in strobes

When looking for a shelter for communications, ensure the integrity of the insulation, avoid friction and kinks in the cable. You can’t just push annoying wires behind the closet - they don’t joke with electricity.

Photo: Instagram yutnii_podokonnik

Designer Yves Behar created The Frame TV (Samsung), which imitates paintings. The most prudent owners plan the wiring of cable networks in advance, marking niches for strobes in which wires laid in corrugations and fastened with brackets will be placed. All communications are brought to a common console with the required number of outputs, and at the end of the network wiring, strobes are plastered.

TV hidden in the floor mirror. A wall-mounted TV with built-in wiring is an ideal option in terms of aesthetics, convenience and safety. Cobwebs of cables do not spoil the look of wall decoration; small children and pets will not reach the wires. At the same time, there is no need to make holes in the entire wall - the wires can be led under the floors, baguettes and door frames, fortunately, many manufacturers have already attended to the production of skirting boards with removable top panels and recesses for cables.

Concealed wall wiring is the gold standard for aesthetics, safety and ergonomics.

Photo: Instagram studio_disage

One of the trends is to “hide” the TV so that it is invisible when it is turned off (for example, disguising it as a mirror).

Wires behind TV set and furniture

The apartment has already been renovated and there is no way to carry out hidden wiring? Try hiding the wires behind the TV. The main thing is to choose the right bracket: if all the sockets fit at a distance to the edges of the TV receiver, the wires will not be visible. Mark the places for sockets with a chalk or lead, cut two parallel vertical strips for strobes with a grinder at an interval of 2-3 centimeters and hollow out the inner surface with a perforator to the desired depth. Next, drill the required number of holes for the sockets with diamond crowns and proceed to laying the wires.

Sockets are shifted to the side, making room for the bracket.

If this is the first time you hold a construction tool in your hands, it is better not to take on wall chasing. Hide wires behind mirrors, racks, wall sets, frames and decor items - vases, ottomans, curtains, dry bouquets and live plants, fixing the cable with electrical tape.

Built-in security panel - a secure hiding place for cable systems.

A transformer case with a built-in television receiver hides labyrinths of wires in the depths.

Photo: Instagram studio_disage

The modular TV stand serves as a hiding place for wires and thousands of useful little things. Transforming furniture makes things much easier - it is enough to free up space at the location of the television receiver, and all the cords will be behind the cabinets and shelves.

Photo: Instagram velikayavalensia

Carved TV frames are an elegant move. You can also pick up a nice cabinet or wall panel with a built-in niche for cable systems, closed by a door or panel. The most radical solution is to install a TV from a centralized station: no wires - no problems!

Photo: Instagram albinadesign

Bench under the TV looks strange, but it masks the wiring well.

Wires in the cable channel

If it is impossible to keep hanging wires out of sight, decorative cable channels will help to elegantly fit communications into the environment. The range of offers is not limited to the same type of plastic boxes - look for conceptual models that turn cable networks into elements of thematic decor. Wires in wiring boxes lined with bricks are suitable for a stylish loft, and in high-tech apartments, cable channels in the form of thin pipes are often found. Fans of eco-style should pay attention to boxes upholstered in wood or MDF panels. Cable channels are attached to the walls with dowels, glue nails or hidden screws.

Graphic patterns from wires - a new look at wall decor. Original author's compositions are assembled from long wires, supporting the theme and general mood of the interior. Before proceeding with the assembly, draw up a layout of the wires, then transfer the sketch to the surface of the working wall and measure the length of the main segments with a nylon thread. Drawings from wires in colored casings with curly overlays, which continue the wall painting, look very interesting.

A little imagination and decor - and the cable will turn into a flowering tree! By combining different decorating techniques, you will turn the cable system into a spectacular installation that will look fresh and unusual. Feel free to experiment: the most unexpected solution is likely to be successful!

Quite often, owners of their own homes think about the question of how to hide wires from various equipment. If they “show off” from the outside, then this will not add aesthetics to the interior. You can cope with such work on your own, for this you just need to prepare some tools and show your imagination. Manipulation will not take much time.

Decorating wires from the TV

In some apartments and houses, you can often see a picture when whole strings of cables and wires come from equipment like a TV. However, they can be hidden in the wall, given some rules. Among them should be highlighted:

electrical wires must not have damage to the insulation;
it is better to place the wires as far as possible from microwaves, refrigerators, washing machines and irons;
it is important to prevent moisture and condensate from getting on the cables.

If you also have a question about how to hide the wires, then it is best to place them in a cable channel where low-current lines run like the Internet, alarms and telephone wires. The layout of the apartment must be done in one piece. Crossings are not allowed, and when carrying out installation work, splitters and splitters of factory-made signals should be used. There should be no twists of wires, as they will not be able to create good shielding, which will negatively affect the signal quality.

Modern solution: using a box

Before you hide the wires, you should consider several solutions to this issue, among which the use of decorative boxes should be highlighted. They can be made of metal, plastic or a combination of materials. Such a device not only looks quite simple, but also complies with fire regulations.

This solution also has disadvantages, they consist in the high cost of products, the need for skills from the master, as well as the lack of recommendations for installation.

If you still do not know how to hide the wires, then you should not buy the first box or cable channel that suits you in appearance and cost. It is important to pay attention to accessories, namely:

plugs;
transitions for corners;
tees;
peak elements.

This will not only simplify installation, but also give the appearance of the box an attractive look.

Cable routing in the wall

Quite often, novice home craftsmen wonder how to hide the wires from the TV on the wall. If you lay them in a strobe, then this will become the most invisible and reliable way. Drywall sheets are sometimes used as an alternative solution, but their installation requires time and skill. It is best to use the gating method, however, you can resort to it only if the cable laying is accompanied by a repair.

Using drywall sheets to decorate wires

Before that, you can consider several options for solving this issue. One of them is drywall sheets. For work it will be necessary to prepare:

wire;
electrical tape;
strong rope or thread;
small nut.

Work procedure

The distance between the screws will depend on the load on the plastic box. When working with drywall or a wooden wall where the cable channel will be fixed, self-tapping screws are installed every 50 cm. For uneven walls, the fastening step is reduced, which allows you to hide gaps and defects. The floor cable channel must not be fixed with too long self-tapping screws. For reliable fixation, 40 mm fasteners will be enough. For screwing it is recommended to use a screwdriver with a Phillips bit.

Decorating wires in the cable channel using dowel-nails

If the cable channel is to be strengthened to a brick or concrete wall, which is quite common for modern houses and apartments, in this case you can’t do without a cable channel and dowel-nails, which are also called quick installation. To carry out the work you will need a puncher with a 6 mm drill.

To independently fix the cable box on a brick and concrete wall, you must perform a number of the following steps. 6 mm holes are drilled in the bottom of the cable channel, the distance between which is 50 cm. The box is applied to the wall according to the markings, which will allow you to mark the attachment points that coincide with the holes in the cable channel. Holes must be drilled, only after the box can be installed in its place. Nails are driven in with a hammer.

Using "bugs" to install a cable channel

If it is necessary to install the cable channel into a metal surface with a thickness of 2 mm or less, metal screws, also called bugs, should be used for fixing. On sale you can also find a special gun with which the cable channel is installed on concrete.

Original ideas for the home: how to make the wires from the computer invisible

You, too, can try to solve the issue of how to hide the wires from the computer. There are several modern solutions for this. The first idea is to mask the cords under the table top. For this, clips are used, installed on self-tapping screws or reinforced with double-sided tape.

If you don’t want to spoil the table at all, then you can hide the wires in an ordinary shoe box, but you can decorate it first by making a design that is close to the interior of the room. If you wondered how to hide the wires decoratively, then for this purpose you can purchase a special decorative case in which the extension cord is hidden. It can be attached to the top of a desk.

When the speaker cord interferes, it is usually hidden in a case that is fixed to the back of the table. Extra cords and charging can be removed using ordinary stationery. Another original idea is to run wires through a hose. This quite often helps to solve the question of how to hide the wires under the table in one sheath, which will not spoil the interior so much.

Conclusion

The workplace using one of the above methods can be made more neat and aesthetic. There is nothing complicated about this, the cords can simply be placed in a box or fixed under the table. An additional advantage is that the cords will be reliably protected from children, as well as pets.

1 Wires in strobes

Designer Yves Behar created The Frame TV (Samsung), which imitates paintings. Photo: Instagram yutnii_podokonnik

The most prudent owners plan the wiring of cable networks in advance, marking niches for strobes in which wires laid in corrugations and fastened with brackets will be placed. All communications are brought to a common console with the required number of outputs, and at the end of the network wiring, strobes are plastered.

TV hidden in the floor mirror. Photo: Instagram vsrede

A wall-mounted TV with built-in wiring is an ideal option in terms of aesthetics, convenience and safety. Cobwebs of cables do not spoil the view; small children and pets will not reach the wires. At the same time, there is no need to make holes in the entire wall - the wires can be led under the floors, baguettes and door frames, fortunately, many manufacturers have already attended to the production of skirting boards with removable top panels and recesses for cables.

2 Wires behind TV set and furniture

It makes things much easier - it is enough to free up space at the location of the television receiver, and all the cords will be behind cabinets and shelves.

Carved TV frames are an elegant move. Photo: Instagram velikayavalensia

You can also pick up a nice cabinet or wall panel with a built-in niche for cable systems, closed by a door or panel. The most radical solution is to install a TV from a centralized station: no wires - no problems!

Bench under the TV looks strange, but it masks the wiring well. Photo: Instagram albinadesign

3 Wires in cable channel

Wires in junction boxes lined with bricks are suitable for, and in high-tech apartments, cable channels in the form of thin pipes are often found. Fans of eco-style should pay attention to boxes upholstered in wood or. Cable channels are attached to the walls with dowels, glue nails or hidden screws.

The wires are disguised as a photo wallpaper pattern. Photo: Instagram formulakomforta40

Cable channels made of wood can be made by hand. Take two planed boards and place cables between them. You get a kind of baguette, which looks charming next to paintings or panels in the same unpretentious framework. You can achieve a complete fusion of the box with the wall finish, if you close the boards with an overlay with a suitable texture or paint them to match the wall.

4 Wires as an interior detail

Sometimes there is no better way to disguise questionable furnishings than by placing them in a conspicuous place.

Graphic patterns from wires - a new look at wall decor. Photo: Instagram booklya_ya

Original author's compositions are assembled from long wires, supporting the theme and general mood of the interior. Before proceeding with the assembly, draw up a layout of the wires, then transfer the sketch to the surface of the working wall and measure the length of the main segments with a nylon thread. Drawings from wires in colored casings with curly overlays, which continue the wall painting, look very interesting.

If the color version of the cables does not suit you, collect all the wiring in an extension cord - the choice of shades and textures will expand noticeably.

Short wires are decorated with edging and overlays. A cable decorated with an LED garland brings intrigue to the atmosphere, and massive beads are strung on thin wires to create ethnic accents. In children's communication, they decorate with stickers and funny figures, and in a romantic girl's bedroom - with artificial flowers, lace and feathers. For fastening cables, it is convenient to use ready-made plastic clamps - inconspicuous or curly.

A little imagination and decor - and the cable will turn into a flowering tree! Photo: Instagram u.domashnii

By combining different decorating techniques, you will turn the cable system into a spectacular installation that will look fresh and unusual. Feel free to experiment: the most unexpected solution is likely to be successful!

We welcome everyone who looked to us on the Internet light. Our portal is connected with electrical issues, but we do not forget to periodically talk about things indirectly related to it, which, however, are no less important in our everyday life.

The choice of today's topic fell on the TV on the bracket, namely, how to hide the wires from the TV on the wall. At first glance, it may seem that the question is not so complicated, but even the most ardent skeptics, after reading the material, will discover something interesting and new. So let's go!

We will start with the most obvious and will gradually move towards more interesting and original solutions.

Straight into the wall

Today, concealed wiring is more popular than ever, and indeed, people try to hide from their eyes any communications that, in their opinion, spoil the appearance of the interior. The antenna wire for the TV was no exception, which very often has to be pulled through the entire apartment or house, since a high-quality video signal can often be obtained only by installing the receiver only in a certain place.

Floor plinths with cable channels, which can hide most of the cable along its length, are very helpful in solving this problem. However, if the TV is hanging on the wall, the wire has to be taken out of the plinth and directed to it, and it is not difficult to guess that the whole picture immediately deteriorates.
Plus, do not forget that the antenna television wire is not the only cable that fits the TV. At a minimum, you will need to power the equipment from the electrical network, but, as a maximum, it will also include: LAN Internet cable (many modern TVs are already, in fact, a computer that can access the network); wires for transmitting video and audio signals from various DVD players, TV receivers, HI-FI acoustics and more.
The picture begins to emerge and is completely horrific, and sometimes the maximum that can be done is to wind everything up in a bunch of nylon ties, and at least somehow try to disguise all this disgrace.

Perhaps the most time-consuming and dirty way to hide such a number of wires will be laying them in the strobes made in the wall during the repair. However, the method can be safely called the most accurate and technologically advanced, since the wires hidden in this way will not be gnawed by your cat, no one will accidentally hook your foot, plus everything will be displayed in a single console containing all the necessary outputs.

In this case, there is no need to hollow out the entire wall in order to spread all the wires around the room. It is enough to stretch them to the same plinth and hide everything else in it.

The big disadvantage of this approach is that it is applicable only in premises where renovation work is being carried out. If your walls are just done and you don't want to touch them anytime soon, then scroll right through to the next chapter for alternative methods for hiding your TV antenna wire.

If you are ready to take drastic measures, then stock up on tools and go ahead:

First of all, you need to accurately outline the location of the TV on the wall.
Next, determine which bracket you will use for mounting. This moment is very important, because, despite the VESA world standard, which includes the most common attachment points, the brackets themselves can be of different shapes and sizes.

Advice! Without paying attention to this, you can end up with communications peeking out from behind the “carcass” of the TV, since the bracket is too massive, or it will interfere with switching.

It is desirable that the device is already in your hands, so that everything is measured clearly.
Try on the bracket to the TV and measure the distance that remains to the edges - it is on it that we will place all the sockets.
We transfer the measurements to the wall and begin to dust. The grinder cuts two vertical strips a couple of centimeters deep, at a distance of 2-3 centimeters from each other.
Next, the inner part is hollowed out with a puncher to form a full-fledged strobe.

After, with the help of diamond crowns, a series of holes is made for the purchased TV outlet. Immediately see that this element contains all the necessary outlets and a sufficient number of power points so that it is enough to connect all the equipment.
The next steps are extremely simple. First, all the wires are laid in the strobes, which must first be fixed with plastic brackets so that they do not fall out and do not interfere with further plastering.
The ends of the wires are connected according to the scheme with the socket, and it is installed in its place.
All strobes are sealed with gypsum plaster, after which subsequent finishing is performed.

cable channel

A less elegant solution would be to use a cable channel, but not everything is so simple - you can make this element yourself or find a non-standard store option, making it an integral part of the interior. Plus, do not forget that it will be much easier and faster to implement such an undertaking.

Having studied the assortment of electrical goods stores and those selling electronics, you can find the following types of cable channels:

The easiest option is PVC.. Everyone saw them - this is an ordinary plastic box in white or another color, which has a removable lid held on by latches. It is possible to successfully fit such a product into the interior only if it is combined with the environment in terms of color - it will merge with it or, on the contrary, will be brightly contrasting.

Quite a rarity - models from MDF that can be effectively combined with the environment.
Metal options- more often it is aluminum, which is shown in one of the photos above. Such a product looks impressive enough to become part of some futuristic interior.

The structure of all models is very similar. They are attached directly to the wall with dowel screws, after which all connections, together with wires, are hidden under a decorative overlay.

As already mentioned, in some cases it is advisable to make a box with your own hands. The quality of workmanship and the final appearance will depend entirely on your ability to handle the tool, as well as the type of materials used in the decoration of the room.

The photo above shows a very simple and at the same time effective way to assemble such a box. It is made of planed boards, between which all the wires are laid. Any decorative overlay can be placed on top of them, and the boards themselves can be painted in any shade to make them as inconspicuous as possible.

Special furniture

Furniture manufacturers also did not bypass the problem and offered their solutions to the buyer.

As you can see, the variety is very large, and there are enough non-standard furniture options. In part, they are not able to hide all communications and still require gating, however, with this approach, there will be much less dirt, so you can resort to this method even in a renovated room, doing everything as carefully as possible.

Creative approach to problem solving

Well, for dessert, we offer you several options that can not only be effective, but also allow you to additionally decorate the room.

decoration

A very interesting way out of the situation is not to hide the wires from the TV on the wall, but to decorate them, that is, to make them part of the interior.

Here are some interesting examples:

There are a lot of decoration options, and even manufacturers offer their own solutions. And if you have enough experience and imagination to create and implement your ideas, you can create a real masterpiece for mere pennies.

The simplest ways of artistic decoration will be the following options:

Parts of the wires can be placed behind the furniture, attached to it from the back with tape or staples;
Install living plants under the TV;
Use varnished driftwood;
Make a necklace out of wire by putting large beads on it;
Apply ready-made plastic clamps from the manufacturer;
And much more.

Decorative boxes

If the wires themselves do not bother you much, but the massive tees and extension cords “calm” your eyes, then the original solution to the issue will be to place them inside a decorative box that you can make yourself or purchase a ready-made version. By the way, instructions for assembling one of these solutions will be given in the video attached to the article.

Various devices are also very effective, allowing you to hide and secure the largest parts in inconspicuous places.

Here are some photos with similar solutions:

That, in principle, is all that we wanted to tell you about how you can hide or disguise the antenna wire for the TV and other cables. No need to put up with the given! Approach the matter wisely, and the result will not keep you waiting!

Every person who loves order tries to improve his home, making it as comfortable as possible for living and aesthetically beautiful. For many of us, our own apartment is not just a roof over our heads, but something more, it is our fortress and our nest. Home improvement is a very broad and interesting topic.

Today we decided to touch on a topic that is quite sore for many - the problem of wires, or rather a large number of them. Despite the fact that scientific and technological progress has allowed us to transfer many devices to a wireless connection, nevertheless, the problem of a large number of wires is very relevant for many of us.

How to hide wires on the wall, on the ceiling and on the floor?

If you have a cable running along the ceiling or wall, then it can be hidden in a decorative plastic box. The box, depending on the type of wall or ceiling, is mounted on self-tapping screws or on dowels, a cable is laid in the niche of the box and is closed from above with a fixing bar. This method is simple and the most commonly used. But, nevertheless, instead of a cable, you will get a plastic box, which, of course, is better than a passing cable, but not an ideal solution at the same time.

So that your wires do not pass from the outside of the wall, floor and ceiling, we recommend that you initially hide them inside.

How to hide wires in the wall. When making repairs, there is nothing difficult to hide the wire in the wall, having a grinder and a puncher. With a grinder, you make grooves along the entire line of laying the wire, and knock out the central part with a puncher, after which the strobes are ready. Laying the cable should also not be difficult, since the laid cable is immediately fixed with alabaster, which instantly hardens. After laying the wire using a cement mixture, you can close the strobes with the laid cable. That's the whole procedure.

How to hide wires on the ceiling. You can also hide the wire in the ceiling, and it's even easier to do it than in the wall. To do this, you can design a decorative figured niche of drywall, around the perimeter of the entire ceiling. In this niche, you can seamlessly lay all the wires by pulling them with plastic ties into one line. In addition, for the aesthetic transformation of the ceiling, we recommend organizing lighting in this niche, it will greatly transform the room at night, creating beautiful relaxing lighting.

You can also hide the wire in the false ceiling niche, this option is even more practical, since the wires do not need to be laid along the walls, they can be laid as you like, even diagonally.

How to hide wires on the floor. A great option to hide the wire running along the floor is the baseboard. For this, there are special options for skirting boards with a niche for laying cables in the central part. You take out the central part of the plinth, lay the cable in this niche and then return the central part back - the most practical way.

If you want to hide the wire in the floor during repairs, then there are several ways to do this. The first way is to knock out a groove in the floor with a puncher for laying the wire. Then thread the wire in the corrugation and lay it in these grooves. After that, the grooves with the wire are filled with cement, and the issue is resolved.

It is much easier to lay the wire in the floor if you are planning with a cement screed. To do this, you need to lay the wire stretched in the corrugation on the floor surface, after which a cement mixture is applied to the floor, thereby hiding the stretched wire under it.

How to hide the wires from the TV?

The best way to hide the wires coming from the TV is, as mentioned above, to put them through a special plastic decorative box. You can hang the TV on the wall, and in the place where the TV is mounted on the wall, bring out all the necessary wires, so the wires will not be visible at all. Very often, the television cable is hidden in the baseboard or in the floor, we have discussed these methods above.

How and where to hide the wires from the computer?

Well, the last, more global problem: where to hide the wires from the computer!? The wires connecting and powering devices are a problem for many computer users. A string of wires does not fit into the interior in any way, and besides, it gets under your feet. How and where to hide the wires?

First you need to turn to wireless technology. By installing a Wi-Fi router in the apartment and connecting Wi-Fi modules to devices, you can easily remove a couple of wires that went from the router to devices that consume the Internet. Install a Wi-Fi access device in the corridor so that the Internet provider's cable is not pulled throughout the apartment. For devices that received the Internet by wire: a computer, a receiver, a TV - you can buy Wi-Fi modules (if there are none) and by setting up a wireless connection, you additionally get rid of several wires stretching throughout the apartment. In the future, try to buy Wi-Fi enabled devices.

So that the wires do not lie on the floor, and there are no turns of them - buy the wires of the required length, in which case they will be stretched, thus they will not lie on the floor in turns. The wires that lie under the table can be run along the bottom of the tabletop by attaching them with tape. Excess wires can be hidden in special decorative wire boxes. These boxes have a fun design and will harmoniously fit into any interior, and there is a wide selection of them on the Internet.

As in the other cases listed, all wires from the computer that go to remote devices can be pulled through the plinth. A more complex solution is the construction of a raised floor for laying wires. To do this, raise the space on which the computer is located by a few centimeters with the help of a built niche in which all the wires will be hidden.