Do-it-yourself floor hanger for clothes. DIY clothes hanger: how to make, drawings, photos, floor and wall options Do-it-yourself metal floor hanger

Do-it-yourself clothes hanger is a fruitful idea. Theater begins with a hanger; house too. In the sense of spirit, atmosphere, "energy". The reason is simple: the first thing a guest looks for is where to hang outerwear. And if the hanger is clearly home-made, but comfortable, stable and durable, a positive reputation for the owner is provided.

The second argument for making a hanger with your own hands is prosaic: purchase prices are clearly disproportionate to production costs. A homemade clothes hanger will save you quite a visible amount in the budget. It is not difficult to make it, it will take a little material, and waste from repairs will also go into business. The tool in most cases can be dispensed with by hand.

These factors are especially felt if a floor hanger fits in the hallway. In addition, it can also serve as a dryer if its design is frame, see below, because. On such hangers, it is convenient to hang clothes on hangers, and the hanger itself moves away from the wall. If in the house it was possible to shield the dressing room, then the floor hanger best option. The cost of floor hangers is significantly higher than wall hangers, but there is nothing in the design that would not allow you to make a floor hanger yourself.

On the floor or on the wall?

It has already been said enough to make a choice, as long as there is enough floor space. However, let's finally compare how attractive a hanger is in a floor-type hallway:

Clothes hung on hangers dry faster, do not stretch; the collar and lining are not torn.
On a hanger approx. 1.5 m fits a seasonal set of clothes for the whole family, which will save on the closet and the area under it.
A shoe rack is naturally attached to the floor hanger, which simplifies the work of equipping the hallway and saves its area.
With correctly calculated dimensions of the hanger, neither the wall from the clothes nor the clothes against the wall are damaged.
The mobility of the hanger does not interfere with the rearrangement of furniture; after moving the hanger, it is not necessary to seal the mounting holes in the wall.

However, floor hangers are different, and not all of them are most suitable for living quarters. For example, for orders (from the old Russian “order” - office, office, office) floor lamp hangers, pos. 1-4 in the figure, it is inconvenient to hang clothes on hangers. Due to the small area of support, they are rolled, especially loaded with wet winter clothes. To emphasize the functional inferiority of the product, such hangers are called hangers, and they often go on sale under this name.

Types of floor hangers

The best option is the same theatrical wardrobe frame hanger, pos. five. In the version for residential premises, it is supplemented with shelves for hats, shoes and gloves / scarves; perhaps an additional tie rod, pos. 6. Disadvantage - the "legs" of the hanger get underfoot. In an attempt to get rid of it, hangers were invented - frames on a stand, pos. 7, but generally speaking, they fell even more than the orderly ones hung up. Another option is a hanger-frame without legs, leaning against the wall; we will remember this one. There are also folding frame hangers, but in everyday life they have almost no advantages.

If in the hallway with a place is generally tight, then a wall hanger is still more suitable. Simple wall hanger-sconce, pos. 1 in Fig., is as compact as possible, but not at all more convenient than the order, except that it does not fall from the next jacket to one side. Hanger-shelf, pos. 2 won't fall off if it's attached properly, and neither will hats/caps, but the wall and clothes rub against each other.

Types of wall hangers

Wall hanger panel, pos. 3, saves the wall, but not the clothes. Most of all, leather things wear out on such hangers. Tanners jokingly advise: how, they say, to distinguish a sheepskin coat from full grain leather from it from reverse? The first, with everyday use of a hanger-panel, loses its appearance in 2 winters, and the second - in half a winter. Considering the cost of products from genuine leather, that's no good. Therefore, hangers-panels on the wall for expensive things are often supplied upholstered, pos. 4. As for wall hangers with an openwork shield, pos. 5, then in this case its meaning is only decorative: it does not protect either things or walls.

Floor hangers with chest and bench

There are also floor hangers-panels with a stand, for example. in the form of a cabinet, chest or chest, pos. 1 in fig. on right. This is not the best option: someone will once put something on the lid, and with the clothes removed from the hanger it will be whisked to the floor. Much more practical are floor hangers-panels with a bench, pos. 2. The flower under the seat is a matter of taste of the owners, if only he survives there, but the shoe box or chest for accessories to care for her in the banquette drawer is the place.

Clothes and keys

Regarding hangers-panels, the amateur master has an additional opportunity, namely: to provide such a sidewall at the farthest from front door edge. Perhaps not reaching the bottom, with a bevel or notch. The factory ones do not do this: the hanger should be designed for clothes sticking out from the side. One sidewall almost does not interfere with this, but it is not known how the hanger will stand with the buyer, and it is unprofitable to make right and left hangers.

What gives such an addition? Place for the housekeeper, invisible from the threshold. In the same place, on the side, there can be a dressing table or cabinet, but the main thing is that the master's keys will not catch the eye of a casual visitor, and they are in sight, according to criminologists, a serious factor in spontaneous illegal actions, without which, i.e. temptation, the visit of a not entirely trustworthy subject would have done well both for the owners and for him. You can, of course, make a key holder luxuriously designed and with a secret lock, but this is a lot of work and material costs. And so - a simple plank with hooks will do. Or just hooks screwed to the sidewall outside of the stowage section.

We will assume that a suitable design has already been selected, and let's take a look at how to make a hanger. Preferably wooden: the material is noble, natural, easy to process. Let's not forget other versions; more convenient in some cases. Let's start with floor hangers as the most functional.

floor standing

Lovers of crafting from the heart, having a milling tool for wood, can immediately take up the floor frame hanger with legs. Made of small-layer hardwood (oak, beech, hornbeam, walnut, birch), it looks chic, and it will take only 360 mm of the floor in width.

A suit hanger works well as a prototype, you just need to make it higher and move the trouser bar up so that you can hang coat hangers on it. Instead of a tie rod and handles, a shelf can be installed, and a shoe shelf is mounted below. Drawings of such a hanger are shown in Fig.:

Drawings of a wooden floor hanger

With the indicated other dimensions, the structural and overall width (dimensions 430 and 460 respectively) can be increased by 1-1.4 m without compromising strength and stability, i.e. the hanger will be already a family width up to more than 1.8 m.

About hooks and trempels

Bags, umbrellas, scarves are also left on the hanger, and a bachelor can also have a skirt with lingerie there. Sometimes life is life. It is also more convenient to hang clothes on hooks for a short time. Therefore, in frame hangers, sometimes runner hooks are put on the main bar (the former trouser bar in Fig; height 1360). They or hangers, depending on the need, are shifted to the side in a crowd. But the hook-runners under the fingers turn out at the most inopportune moment. In a hanger of this design and similar ones, the problem is solved simply: the main bar is for hangers, and fixed hooks are attached to the top board.

Pipes and profiles

Original hangers are obtained from round or shaped metal or plastic pipes, see fig. However, despite all the design tricks, their organic vices do not go anywhere. The same as the orderly hung. But high labor intensity is added: in order to hide connecting nodes, you have to strain both your arms and your head.

Pipe hangers

It is better to make a square base of a floor lamp hanger from pipes. With the same withdrawn floor area, the distance between the support points increases by 1.4 times. If the base is still heavier, then the hanger up to 1.7 m high turns into a full-fledged hanger. 60 mm sewer pipes are most suitable.

A short master class in pictures on making the base of a floor hanger from pipes is shown on the next. rice. Pipe sections - 150-300 mm each, depending on how much floor can be given to the hanger. In addition to them, you will need 3 straight tees, 4 right angles and 4 plugs. Connections - on glue for propylene or PVC, depending on the pipe material. Weighting - sand or small gravel.

Making the base of the hanger from pipes

One of the comments to original design begins with a question like this: “Why couldn’t you just solder?”. Judging by the fact that later in the same comment, 90 angles with a clear claim to professionalism are called bends (plumbing bends are oblique tees), another 2-3 and the same number of exclamation points suggest themselves to the question mark.

Nevertheless, the author of the product, albeit not knowing plumbing terminology, solved the problem in a completely engineering way. The hanger does not need tight joints, and a tube of glue will cost much cheaper than renting a soldering iron for propylene. Which, moreover, you need to learn how to use, spoiling a fraction of the material. For greater reliability, you can reinforce the connections with phosphated (black) self-tapping screws: on black, their heads are not visible, and the strength of the hanger will not decrease.

Note: the pommel in the original design is also made of pipes, but, frankly, its design is not the same ... It would be better to drill inclined holes in the rack and insert some strong pins into them using the same glue; wooden, metal.

simple frame

Scheme simple floor and wall hanger from pipes

A frame hanger made of pipes can be without legs, just leaning against the wall with an inclination. However, its slope must be negative. There must be at least 350 mm between the wall and the clothes on the hangers. If the slope of the frame is positive (the upper crossbar is adjacent to the wall), then the lower one will "leave" from the plinth by 500-600 mm. In a small hallway, this is a serious inconvenience. In addition, they will either cling to the lower crossbar with their feet and it will beat the floor, or it will have to be attached to the floor, and this is really bad: any violation of the flooring is fraught with complex and expensive emergency repairs. Have you seen furniture for sale that needs to be screwed to the floor? Except that special purpose, eg. rack. And then, they also try to get by with fastenings to the walls and, in extreme cases, to the ceiling.

A diagram of a frame hanger with a negative slope of pipes is shown in fig. The materials are the same: line segments sewer pipes 60 mm, 90 angles and straight tees. Withdrawn usable floor area - zero. At the bottom there can be a shoe rack or a banquette. For fastening to the wall, in order not to drill a lot and do without expensive collet anchors, it is better to take a couple more tees: with their help, the holding beams - extensions are attached to the wall with a pair of self-tapping screws in dowels each.

wall

Simple hangers-panels do not require special analysis. How to make a wooden wall hanger, see for example. video.

Video: do-it-yourself wall hanger made of wood

Here we recall, firstly, the sconce hanger. Foldable, it can be very useful if a large company has gathered or the kids have returned from the yard at least squeeze it.

An example of such a structure is shown on the right in Fig. However, its creators were clearly guided by the principle: “Consumption is the basis of turnover Money". The outer (folded) side of the flap bar is inactive and a locking mechanism is needed. And a separate hanger for every day.

Compact folding wall hanger

Meanwhile, folding wall hangers have been known since ancient egypt. In the local climate, outerwear was worn occasionally, in bad weather, but after wearing it, it was necessary to dry it. There was no point in keeping a separate hanger for this in the regions where it rains and cold once a year, not every year, so they came up with the one on the right in Fig.

When folded, the compact wall hanger of the Egyptians was fixed with a cypress stick. Now, of course, you can put a ball retainer or just a hook. The main thing is that the hook hooks should be in 3/4 of the circle, then nothing will fall off them even with the bar folded back. And without need, the whole hanger looks like just a stick on the wall; you can hang bags, umbrellas, keys on hooks.

More about hooks

The original wooden hanger can be made without metal at all, not counting the fasteners. Do not rush to throw away the New Year's pine or Christmas tree (only the blanks will need to be turned upside down):

Video: original do-it-yourself wooden hanger

Best of all, such a hanger will look in the country, in a bar or frame house. Depending on the interior design - and in a city apartment. She will go to the bathhouse perfectly: the touch of steamed skin on metal is unpleasant, and to some extent even traumatic.

Hangers in the nursery

Probably, all children scatter wearable things. There is no need to especially scold them for this: without knowing chaos within reasonable limits, you will not accustom yourself to order. Who is against - answer Friday's question to Robinson Crusoe: "Why doesn't God kill the devil?"

However, teaching children to handle things properly is necessary. Only a children's hanger, so as not to cause obvious psychological rejection, should look somewhat disordered. It is also highly desirable that the child associates it with a favorite game or hobby. Examples of wall hangers in the nursery of the "game / hobby" type are given in pos. 1 and 2 fig.

Baby hangers

A universal method of this kind is a tree hanger, pos. 3. In the contour of a tree, as in any fractal structure, order and chaos interact and complement each other, creating a harmonious whole. Do not forget to just make the tree stronger, for example. from plywood from 12 mm, and, as it should, with a step of no more than 250-300 mm, attach to the wall with self-tapping screws from 6 mm in propylene dowels. A tree, after all, to climb on it.

Floor hangers in the nursery are undesirable for the same reason: well, they will climb anyway and crash. Therefore, if you already want a floor hanger in the nursery, you need to make one that you can’t fit on, which can be seen in pos. 4 and 5.

About cutting plywood

In any case, parents face problems that small ones don’t care about yet: material consumption and labor intensity. Draw a complex contour on a grid on whole sheet plywood is no longer easy, then it needs to be accurately cut, which is even more difficult. And in the end it turns out that 60% or 80% of the material went to waste, no longer suitable for anything. It is necessary, on the contrary, to make a children's tree hanger from waste. Or cut a denser whole sheet.

Assembling parts of a plywood hanger-tree

The method for this has long been known: element-by-element cutting and assembly. If the tree is plywood, for full strength finished product each part is recruited from 2 layers, leaving resp. folds and grooves, see fig. Fragments of blanks are assembled on PVA glue, wood glue or Express (liquid nails). If the assembly is on PVA, the fragments must be additionally fastened with small nails with a snake in increments of 100-150 mm with an indent from the edges of 30-40 mm.

They assemble a tree hanger on the same adhesives, but now each connection must be fastened with self-tapping wood screws with an envelope. Then the gaps and fastener heads (they must be drowned during assembly) are rubbed with putty from sawdust of the same plywood on PVA. Such a tree, even without painting, only under varnish, will look solid.

Note: just in case, we recall - all wooden details before assembly, any wooden hanger must be sanded with fine sandpaper and treated with a water-polymer emulsion or PVA diluted with water three to five times. After impregnation before further work make a technological break until the part is completely dry (1-3 days, depending on its size).

And one last thing about hooks

In the illustrations above, you most likely noticed curved wooden hooks and other hanger details. It is quite possible to make them at home. In production, dense, small-layer, defect-free wood or waterproof birch plywood (BS grade) is bent heated with steaming or dry, but these methods are too complicated for homework. Only bamboo is more or less simply steamed: the workpiece is boiled for half an hour or an hour in rapidly boiling water, after which it is bent by hand. In case of bending according to the template, the workpiece must be fastened to it quickly, before it has cooled down, with a wide cotton braid or a strip of natural tarpaulin.

Wood rasp

At home, it is easier to cut blanks of the required configuration from a sheet of plywood (any) or MDF of the desired thickness, or, twice or four times more in number, from thin sheet material to dial then how much is required in thickness. Cut with a finishing allowance of approx. 1 mm. The cut blanks are tightly pulled together in a package in a carpenter's vice or in a locksmith's through gaskets made of thick plywood and processed with a rasp on wood to size, and then with a clean sandpaper. One rasp is enough, with flat and semicircular working surfaces, see fig.

The workpieces are assembled into parts in the manner described above. The end surfaces, if you need to hide the layered structure of plywood, are sealed with strips of self-adhesive film under the tree. After that, the part is varnished twice or thrice with acrylic varnish on water based; nitrolac can ruin the self-adhesive. Edge (edge) plastic furniture edge not worth it: you need to accurately select the groove for the edge anchor, which requires a milling machine, but on curved surfaces of large curvature and short length, the edge still does not hold well. And the details pasted over with self-adhesive, under varnish, from solid wood, even the master cabinetmaker will not immediately distinguish.

(Visited 21 674 times, 1 visits today)

Clothes hangers are a mandatory attribute in every home, since otherwise it is rather problematic to arrange outerwear. In addition, floor hangers are also useful in the bedroom, so as not to put clothes in the closet every evening and not to use chairs or armchairs. But in the store beautiful furniture is quite expensive, so The best decision This is a DIY outdoor clothes rack. After all, from inexpensive materials, you can make original and beautiful hangers that will greatly decorate and make your interior comfortable.

You can make a clothes hanger from almost any material. But if you are going to do it yourself, the choice of material should be approached carefully.

Wood and plywood are best suited for work, these are the most practical and plastic materials that are easy to work with. If products from them are used in the house, then they are guaranteed not to be exposed to moisture and their service life will increase significantly.

Working with metal or plastic at home is quite difficult, so you should not choose these materials. It is worth considering the fact that sometimes there is a significant load on the hanger, so you need to use materials of appropriate strength so that the furniture does not break.

Examples of floor hangers using plumbing metal pipes

When you buy wood or plywood, pay attention to their quality, because this is a guarantee that the hanger will look beautiful. In most cases wooden crafts covered only with stain or varnish, so the texture remains visible on the surface.

Floor hanger in the form of a tree

Making a floor hanger is easy, and it does not require a lot of tools and materials. This hanger is made from two sheets of plywood, approximately 70x170 cm in size and 18 mm thick. For manufacturing, you only need glue, a jigsaw and sandpaper. The work itself will also not take much time and you will not find such hangers in any furniture store.

First you need to draw on one of the sheets of plywood the outline of the future product. This can be done simply by transferring the drawing to scale on plywood. The most important thing is that the legs are of sufficient width - about 60 centimeters. This is necessary for stability, since if you make them narrow, then the hanger will fall if you hang heavy winter clothes on it.

According to the great director, the theater begins with a hanger. But is it just theater?

It is difficult to imagine any house - whether it is a cozy apartment or a spacious cottage - without this integral attribute of our life.

Hanger-rack on the floor, hooks on the wall in the hallway, coat hangers in the closet… They have one role: to keep our belongings in a tidy condition.

However, people with rich imagination able to turn this boring piece of furniture almost into a work of art. A simple set of tools for the job, patience and a couple non-standard ideas- and you are the owner of a unique thing.

Hanger as part of the interior

The main thing in any home is a spacious closet. Blouses and dresses, trousers and skirts, gloves and scarves, coats and raincoats coexist in it.

A good hostess has every thing in its place. The clothes in the closet are different. And hangers for her, too, should be different.

How to make a hanger with your own hands? Believe me, it's easy and even fun. Dig into a chest full of long-forgotten grandma's dresses. You will find amazing things there.

Antique hangers (so-called trempels) can be restored, and they will turn into the main decoration of your wardrobe.

In the old days, clothes hangers were made of wood. Using one of the decor techniques, you can give an old thing new life. And what a life… You will want to hang such beauty on the wall, and not in the closet – and let everyone admire it.

You can transform a clothes hanger with the help of decoupage, unusual coloring or appliqué.

The soft shoulder pads are very comfortable to use. Things on them keep their shape and do not slip off. You need to wrap ordinary trempels with thin foam rubber, and then sheathe them with a pretty fabric. Beads and ribbons will give the new little thing a special charm.

But to decorate your house with a wooden hanger own production more difficult. Woodwork requires special skill. And special tools are needed here.

Wooden wall hanger

Wall hanger - the design is simple. However, its manufacture should be approached with all seriousness - then it will serve you for a long time.

The main guarantee of success is strong, dry wood without cracks. A piece of timber or a board is perfect. The length of the workpiece depends on the length of the future hanger. Before starting work, it would be nice to treat the wood with an antiseptic.

Panel mounts are placed on the board in one, two or three rows as desired.

Such a hanger is the place behind the door in the bedroom, as well as in the bathroom, pantry or bath.

Accuracy is brought up from childhood. Furnish your child's room with a simple hanger. And if it is decorated with images of favorite cartoon characters, the child will be happy to look after his clothes.

Note!

Do not mount the hanger directly on a plastered wall. Otherwise, you risk "whitewashing" your clothes. Yes, and a jacket or raincoat, soaked in the rain, will leave ugly spots on the surface of the wall. To avoid this, you need to attach a sheet of plywood under the hanger, thick paper or polyethylene.

Panels for hooks can be given any shape - waves, ovals, hearts, suns, etc.

Attention! The use of untreated wood is fraught with a large number of splinters. Don't forget to polish the hanger panel.

As fasteners, use empty spools of thread or ready-made hooks of any shape.
And if you turn on creativity, dried twigs or plant roots will be used. Cut them, remove the bark, sand, varnish - here you have the hooks. You won't find these in the store for sure.

A simple wall hanger can be made from ordinary wooden planks. Nail them to the wall in parallel - this is the basis for fastenings, and the protection of clothes from whitewashing, and interior decoration.

Note!

Of course, you can’t make such a hanger in half an hour. But the end result of your labors will be a real hanger. It remains only to attach a shelf for storing hats at the top.

Do-it-yourself hanger in the hallway

A good hallway hanger should be durable, beautiful, and at the same time as roomy as possible. In the limited space of the hallway, outerwear, shoes and numerous accessories should fit.

This should not be forgotten when designing a hanger. There should be enough compartments and shelves at the hanger in the hallway to accommodate everything you need.

Attention! When marking out, consider the dimensions of the wall on which you will place the hanger.

For standard apartment a hanger of this size is quite suitable: width - about 1 meter, height - a little more than head level. Fasteners for clothes are placed on the panel in 2-3 rows.

Note!

At the top of the hanger you need a shelf for hats. Structural strength will give straps.

They are attached to the sides of the structure, connecting the shelf to the panel at an angle of 45 degrees. It is best to fix the hanger on the wall with dowels.

Do-it-yourself wardrobe hanger

Making a hanger with your own hands is very simple. There are many ways to make such hangers. You will need: coarse wire, branch pruning suitable form, small plastic bottles put on a wire base, a metal bar or plate bent at the right angle.

Wrap the base of the coat hanger with thin foam or similar material. Then choose a fabric that matches the color and sheathe the base. Add charm to the resulting cute little thing with ribbons, beads or lace.

If the hanger is designed for a baby, decorate it with a funny muzzle or appliqué. Pick up a hook - and hang in the closet.

Floor hanger rack

You can solve the problem of placing clothes in spacious rooms with the help of floor hangers-racks. Floor hangers are commonly used in the reception areas of various institutions.

These interior items are made of metal pipes. floor hanger- a universal thing. You can place almost anything on it. Except, of course, shoes.

The disadvantage of a pipe hanger is its instability. If things are not evenly placed on it, it may fall.

But the floor hanger can always be rearranged to the right place or even hidden in the pantry.

In residential areas, this type of hanger is rarely used: it takes up a lot of space and is dangerous for children. Nevertheless, it is quite possible to make a floor hanger-rack yourself. The material is usually used:

for support - an artificial spruce cross, plastic pipe connectors, rotary mechanism a broken swivel chair;
for a rack - trimming plastic or metal pipes, a trunk of a small tree, a shovel handle, a tripod from a camera, a “leg” of a floor lamp and other suitable details.

Attention! The main thing in a floor hanger is its stability.

Unusual homemade hangers

The hanger can be made from absolutely any material or object. Sounds incredible? Don't believe?

See for yourself:

trimmings steel wire, tube or angle are great for the job. Welding can be used to connect parts. And if the metal is flexible and soft enough, just bend it with your hands. The choice of form is up to you.
The design of plastic pipes will appeal to fans of high-tech style.
If you love working with wood, this idea is for you. From the remains of wood of any thickness, you can make a practical and multifunctional hanger for the hallway.
The simplest hanger can be twisted from wire. Attach clips to the edges of the resulting hanger - now you have a handy little thing for placing skirts and trousers. Experiment with the shape of the hanger - this can be the highlight of your product.
The idea of a “hunting” life is the good old deer or elk antlers. Attached to a suitable base, can become a wall or floor hanger.
It's no secret that many of us (especially men) prefer an ordinary chair to a spacious closet.

Often shirts, jackets and even trousers are hung on the back of a chair. Why not turn the back of the chair into original hanger for those same shirts and jackets? On this design, the entire suit will easily fit.

Homemade hangers in the form of rings are quite suitable for storing belts, belts, ties.

Hanger as home decoration

Before you start making or decorating hangers, think about what style prevails in the interior of your room or hallway. After all new thing should fit perfectly into the existing interior. Here are some examples:

Soft trempels, covered with linen or knitted fabric in bright colors, will perfectly fit into the decor of a country-style bedroom.
Bright hangers with a "doll" design are suitable for a teenage girl's room in the style of Barbie.
Luxurious, with twisted elements, the hanger will decorate the boudoir in oriental or palace style.
A wooden hanger with carved patterns will emphasize the strict style of an office or a hallway in classical style.
Antique, artificially aged or skillfully restored coat hangers will add a special charm to a retro-style room.
In the bedroom of a glamorous lady, a hanger decorated with rhinestones, beads, bows and other shiny little things will look harmonious.
structures made of metal or plastic parts, simple and unpretentious in form will decorate the room in techno or high-tech style.
Simple in form, concise in design, hangers will complement the interior of a minimalist.

DIY hanger photo

One of the convenient ways to store clothes is a floor hanger. You can put it at the entrance and leave outerwear here. Other models are more suitable for bedrooms, dressing rooms, children's rooms.

Types of floor hangers and their location

Some types of floor hangers are placed in certain rooms. For example, hangers for outerwear are placed in the hallway near the door. This is convenient: you can immediately get rid of clothes. The floor hanger-rack for hangers is more versatile. Such products can be placed in the corridor, in the dressing room, even in the nursery or bedroom. They accommodate a large number of clothes and they can replace a wardrobe.

Standing hangers for suits, shirts and trousers are most often “registered” in bedrooms or nurseries (if the child is a schoolboy). This is where we usually dress before leaving the house. Hangers and chairs are also placed there. This is, in fact, one of the options for suit hangers. Just the legs and stops took the shape of the seat.

What materials are they made from

Floor hangers are most often made of metal or wood. Both of these materials are strong, ductile, durable and relatively inexpensive. Some parts - plugs, parts of hooks - can be made of plastic.

Most often you can see floor hangers made of metal and wood.

Plastic inserts are more common on lower cost metal hangers. If not elements of the supporting structure are made of plastic, this is not bad and you can buy such floor hangers without hesitation. If the elements of the supporting structure are made of plastic, it is better to look for another model.

Metal hangers

The largest selection of floor hangers made of metal. They are usually made from thin-walled round or square tubes. The metal used is most often black, coated protective coating. It can be paint (most often - powder coating), nickel plating, chrome plating. In recent years, a new protective coating has appeared - a plastic film (PVA). This is also a good option, since the film is impervious to moisture and air. It is easy to care for such products, as the surface is smooth, without pores.

If the floor hanger will serve to accommodate a heavy winter clothes When choosing, pay attention to the thickness of the metal. The minimum in this case is 1 mm. If the pipe wall thickness is not indicated in the product description, the wall is most likely very thin and suitable for light clothing. Indirect signs that will confirm your guesses are the weight of the product and the price.

Wooden

Wooden hangers can be carved from solid wood, or can be prefabricated. The first option is much more expensive. Teams are 2-3 times cheaper, but they do not differ too much in appearance. The presence of joints in products of normal quality is hardly noticeable, so with a limited budget it is quite possible to purchase economy class products.

Wooden floor hangers are well polished, coated with a protective coating. Usually varnish or oil is used. The varnish creates a protective film on the surface, so it is easy to care for such products. Wood oils protective film do not create, but protect no worse. When processed with oil, the structure of the wood is clearly visible - all the fibers, the pattern.

Standing clothes hangers in the hallway

Floor hangers for outerwear in the hallway most often represent a rod, on which hooks for clothes of different lengths and shapes are planted around at different heights. For stability, the design is equipped with a round (rarely square) weighted base. They can be made from wood or metal.

The height of the floor rack is 150 cm and above, and the base is a circle with a diameter of 35-45 cm. In order for the hanger to be stable, you need to pay attention to the fact that the lower part is weighted. And anyway, such designs require careful attention: you need to hang clothes evenly. Otherwise, the hanger may fall.

There are floor hangers for outerwear of this type, but made differently. Several pipes or metal strips are bent with a certain radius. In this case, the upper part is smaller than the lower one. This design is more stable, but requires more space, which is not always possible in a small hallway.

Clothes hanger racks

Hanger-rack for clothes on hangers - handy thing if there is not enough space in the cabinets. They consist of a rectangular base, one or two cross-tubes, on which hangers with clothes are hung.

Hangers-racks are made of metal and wood. There are metal pipes, there are forged ones. Some Models metal racks for clothes have adjustable height. For long clothes, their rack can be raised higher. Max Height- 150 cm. For short clothes, you can put it at a height of 80-90 cm. This is - minimum height, but there are also intermediate positions.

In some cases, a floor hanger on wheels is useful. It is easy to move from place to place without removing hung clothes. There are children's models of floor hangers of this type. They differ only in height and more "cheerful" colors. Even children's floor hangers can be made of plastic. Children's clothing does not weigh that much, so the strength of the plastic is more than enough. And for the price, plastic floor hangers are the most inexpensive.

Folding models - an outlet in case of receiving guests

For those who receive guests in large numbers, it can be problematic to place their outerwear. For such cases, there is a folding rack for coat hangers for outerwear. When folded, it takes up very little space and can be stored in a pantry.

Floor suit hanger

The problem of storing a business suit is easily solved with the purchase of a special floor hanger. It is somewhat similar to racks, only with special hangers for a jacket and a crossbar for trousers.

There are stands for a suit made of wood, metal and plastic. Plastic in this case is not bad: a large load is not expected, so the strength of modern plastics is more than enough.

If we talk about useful options, this is a shelf or a box. It is convenient to store business trifles in it: glasses, cufflinks, wallet, car keys, etc.

They put floor hangers for a suit, usually in the bedroom, in dressing room. It may be convenient to have such a device in the office. There are different models, you can choose for any style of interior. And some options look like a designer decoration themselves.

Hanger-chair and hanger-bedside table

There are quite unusual models hangers. They are combined with pieces of furniture. For example, there is a chair hanger. The models are different: with a hanger for a suit, just a bar for hangers or with a rack for outerwear. For small apartments, this is a very good option. It takes up as much space as a regular chair or bench, and also serves to store clothes.

Floor hanger with chair and bedside table - for full use of the hallway space

Another option: a nightstand with a hanger. Bottom part such a coat rack is much heavier than its top half, so it won't topple over from a couple of coats. The second plus of such furniture - optimal use space. The trouble with all floor hangers is that the lower 50-60 cm remain unused. In the case of a coat rack, this is not the case. It's another one good way rational use space for small hallways.

The first piece of furniture that a visitor or guest sees when entering an apartment or office is a hanger standing in the hallway. Depending on this, an impression or opinion is formed about the whole room and the owner of the house. The range of equipment designed for storing clothes is very wide, so there are wide opportunities for interior decoration of the room (, corridor, hall and others).

Floor hangers on wheels are very convenient and practical in the interior of the apartment. They can be used for the hallway, in or rooms, on the veranda. Modern designers come up with and give such a piece of furniture various forms and interesting figures.

Advantages of floor clothes hangers on wheels:

What is the name of the clothes hanger on wheels (types and photos)

Usually it is called that: a hanger on wheels. A little less often you can find another name: wardrobe rack on wheels.

The floor rack on wheels has become a permanent fixture of various clothing stores. Such racks are often used in locker rooms, wardrobes and at sales exhibitions. Clothes are hung on hooks or hangers. The wheels, which are located at the bottom of the base, create additional convenience for easy and quick movement even of the hanger already loaded with things.

Depending on what material they are made of, hangers are:

metal- have a large weight, stability. For the manufacture of chrome-plated aluminum is used, which, if desired, can be painted to any color;

Metal hanger on wheels

forged structures- unique in appearance, serve as an additional decoration for the room. Very practical and comfortable;

Forged hanger on wheels

wooden hangers - have an attractive appearance, durability. For the manufacture of various types of wood are used. Suitable for various styles interior: from classic to trendy loft and country;

Wooden hanger on wheels

plastic models- too light in weight, so they can only be used with a small number of things.

Floor hangers on wheels are the most convenient and common type of equipment for locker rooms in schools, offices or apartments.

Clothes hangers on wheels - wood or metal?

Metal hangers on wheels

Due to the simplicity of the design of metal hangers on wheels, it can be mobilely moved around the house. The hanger can be decorated with various decorative elements that will decorate your home interior. If the room is cluttered with other things or details, then you can simply move the hanger to another room.

The designs of metal hangers can consist not only of a hanger rack, but also be supplemented with drawers and shelves for various accessories. Shelves can be made of metal, wood or other material.

Photo various models hangers-racks on wheels:

Wooden hangers on wheels

The peak of popularity of wooden hangers came in the 20th century, but now they are gaining popularity again, they are often used in hallways and other rooms. The advantage is their decorative function: they fit perfectly into the interior of the room, made in both classical and modernist styles.

Modern industrial-produced wooden hangers on wheels come in several types. They differ in purpose, size, appearance and type of wood from which they are made:

suit hanger- usually of medium height, used for individual use. On it you can hang a jacket, trousers and other details of a business suit. It is designed for one person, so most often these hangers are placed in a bedroom, office or hotel room. The advantage of the hanger is the indelibility of clothes during storage.

The same hanger can be supplemented with a shoe rack at the bottom:

The size of such a hanger and height are selected according to the age and height of the child, for example, for a small child, a low hanger "Kid" is suitable, with convenient drawers at the bottom for books, handbags and toys. Children's hangers are always beautifully designed, they are distinguished by bright colors, and the wheels make it easy to move such a thing to the right place for the baby in the room.

Children's wooden hanger on wheels

Reliability and stability of a children's hanger is provided with its case design. It will be convenient that you can approach such a hanger from any side. Hangers are made of wood, covered with polyurethane varnish to avoid scratches when using it.

For older children and in used rack models that can accommodate large quantity clothes hung on shoulders.

Wooden hanger on wheels for girls

There are also small models designed specifically for hanging. school uniform: a dress or trousers on such a hanger will not wrinkle, as they are hung on special crossbars.

Wooden hanger on wheels for school uniforms

How to choose a hanger on wheels

AT home interior the hanger is used for outerwear, storage of bags, umbrellas and other accessories. It saves space and can be used in a variety of configurations to suit the space.

The main question when planning and buying a hanger on wheels is its purpose. Depending on this, the owner of the apartment chooses the desired model. The hanger is also selected for the interior of an apartment or office:

If needed hanger for one person, it is better to choose costume wooden hanger. It is better to put such a hanger in the bedroom for individual use or in the office of the head of the office.
For shops and exhibitions better fit durable metal hangers, which can withstand a lot of weight (if there are a lot of things) and it will be convenient to move them indoors as needed.
To choose a hanger in the hallway of an apartment or house need to get away from design in the interior. If the interior is made in a classic style, the best options there will be a stylish forged hanger or a wooden hanger with decorative ornaments. In the interior of the house with more modern style a metal chrome hanger will do.
The best option for children's room there will be children's wooden hangers, matched to the height of the child and decorated in accordance with the interior and its wishes.

DIY clothes hangers on wheels

Wooden homemade hanger. original solution to decorate the interior of your home there will be a floor hanger on wheels, made of wood with your own hands. Each House master can do this.

The design is very simple: width 1 m, height 1.3 m, see the plan in the photo:

For work, you need to buy 2 beams measuring 40 × 40 × 2000 cm. For the upper crossbar, a shovel handle is well suited. Details are cut according to the plan:

The biggest difficulty is to make a stable bottom of the hanger. To make the crossbars exactly at an angle of 45 to the bottom, it is better to align the joint with a square. Then you need to screw the rails. The design of the side part is ready:

Similarly, the rail should be fixed at the junction of the two sidewalls at the bottom. For strength, all joints can be coated with PVA glue:

The upper crossbar is screwed with long screws. Wheels are screwed to the bottom, which can be bought at a hardware store.
So the hanger on wheels is ready - the dream of some housewives. Its cost was about 150 rubles ($5):

DIY pipe hanger on wheels

The hanger is made of metal tubes with a diameter of 22–25 mm. You will also need wheels, screws and a drill.

For a vertical base, pipes 1.3–1.7 m long (2–3 pieces) are needed. Horizontal ones are made shorter - 0.7–0.9 m (4–5 pieces) and are used as lower crossbars.
One of the horizontal pipes connects two vertical pipes at the bottom with screws, the rest are fixed closely. Thus, these bottom pipes form the bottom of the hanger.
The upper crossbar is screwed in the same way, holding the entire structure together.
The whole structure can be put on wheels, they are mounted in the corners of the base.

See also the video on how to make a floor hanger with your own hands: