Homemade clothes hanger in the hallway. DIY clothes hanger: how to make, drawings, photos, floor and wall options

Do-it-yourself clothes hanger is a fruitful idea. Theater begins with a hanger; house too. In the sense of spirit, atmosphere, "energy". The reason is simple: the first thing a guest looks for is where to hang outerwear. And if the hanger is clearly home-made, but comfortable, stable and durable, a positive reputation for the owner is provided.

The second argument for making a hanger with your own hands is prosaic: purchase prices are clearly disproportionate to production costs. A homemade clothes hanger will save you quite a visible amount in the budget. It is not difficult to make it, it will take a little material, and waste from repairs will also go into business. The tool in most cases can be dispensed with by hand.

These factors are especially felt if a floor hanger fits in the hallway. In addition, it can also serve as a dryer if its design is frame, see below, because. On such hangers, it is convenient to hang clothes on hangers, and the hanger itself moves away from the wall. If in the house it was possible to shield the dressing room, then the floor hanger best option. The cost of floor hangers is significantly higher than wall hangers, but there is nothing in the design that would not allow you to make a floor hanger yourself.

On the floor or on the wall?

It has already been said enough to make a choice, as long as there is enough floor space. However, let's finally compare how attractive the hanger is in the hallway floor type:

Clothes hung on hangers dry faster, do not stretch; the collar and lining are not torn.
On a hanger approx. 1.5 m fits a seasonal set of clothes for the whole family, which will save on the closet and the area under it.
A shoe rack is naturally attached to the floor hanger, which simplifies the work of equipping the hallway and saves its area.
With correctly calculated dimensions of the hanger, neither the wall from the clothes nor the clothes against the wall are damaged.
The mobility of the hanger does not interfere with the rearrangement of furniture; after moving the hanger, it is not necessary to seal the mounting holes in the wall.

However, floor hangers are different, and not all of them are most suitable for living quarters. For example, for orders (from the old Russian “order” - office, office, office) floor lamp hangers, pos. 1-4 in the figure, it is inconvenient to hang clothes on hangers. Due to the small area of support, they are rolled, especially loaded with wet winter clothes. To emphasize the functional inferiority of the product, such hangers are called hangers, and they often go on sale under this name.

Types of floor hangers

The best option is the same theatrical wardrobe frame hanger, pos. five. In the version for residential premises, it is supplemented with shelves for hats, shoes and gloves / scarves; perhaps an additional tie rod, pos. 6. Disadvantage - the "legs" of the hanger get underfoot. In an attempt to get rid of it, hangers were invented - frames on a stand, pos. 7, but generally speaking, they fell even more than the orderly ones hung up. Another option is a hanger-frame without legs, leaning against the wall; we will remember this one. There are also folding frame hangers, but in everyday life they have almost no advantages.

If in the hallway with a place is generally tight, then a wall hanger is still more suitable. Simple wall hanger-sconce, pos. 1 in Fig., is as compact as possible, but not at all more convenient than the order, except that it does not fall from the next jacket to one side. Hanger-shelf, pos. 2 won't fall off if it's attached properly, and neither will hats/caps, but the wall and clothes rub against each other.

Types of wall hangers

Wall hanger panel, pos. 3, saves the wall, but not the clothes. Most of all, leather things wear out on such hangers. Tanners jokingly advise: how, they say, to distinguish a sheepskin coat from full grain leather from it from reverse? The first, with everyday use of a hanger-panel, loses its appearance in 2 winters, and the second - in half a winter. Considering the cost of products from genuine leather, that's no good. Therefore, hangers-panels on the wall for expensive things are often supplied upholstered, pos. 4. As for wall hangers with an openwork shield, pos. 5, then in this case its meaning is only decorative: it does not protect either things or walls.

Floor hangers with chest and bench

There are also floor hangers-panels with a stand, for example. in the form of a cabinet, chest or chest, pos. 1 in fig. on right. This is not the best option: someone will once put something on the lid, and with the clothes removed from the hanger it will be whisked to the floor. Much more practical are floor hangers-panels with a bench, pos. 2. The flower under the seat is a matter of taste of the owners, if only he survives there, but the shoe box or chest for accessories to care for her in the banquette drawer is the place.

Clothes and keys

Regarding hangers-panels, the amateur master has an additional opportunity, namely: to provide such a sidewall at the farthest from front door edge. Perhaps not reaching the bottom, with a bevel or notch. The factory ones do not do this: the hanger should be designed for clothes sticking out from the side. One sidewall almost does not interfere with this, but it is not known how the hanger will stand with the buyer, and it is unprofitable to make right and left hangers.

What gives such an addition? Place for the housekeeper, invisible from the threshold. In the same place, on the side, there can be a dressing table or cabinet, but the main thing is that the master's keys will not catch the eye of a casual visitor, and they are in sight, according to criminologists, a serious factor in spontaneous illegal actions, without which, i.e. temptation, the visit of a not entirely trustworthy subject would have done well both for the owners and for him. You can, of course, make a key holder luxuriously designed and with a secret lock, but this is a lot of work and material costs. And so - a simple plank with hooks will do. Or just hooks screwed to the sidewall outside of the stowage section.

We will assume that a suitable design has already been selected, and let's take a look at how to make a hanger. Preferably wooden: the material is noble, natural, easy to process. Let's not forget other versions; more convenient in some cases. Let's start with floor hangers as the most functional.

floor standing

Lovers of crafting from the heart, having a milling tool for wood, can immediately take up the floor frame hanger with legs. Made of small-layer hardwood (oak, beech, hornbeam, walnut, birch), it looks chic, and it will take only 360 mm of the floor in width.

A suit hanger works well as a prototype, you just need to make it higher and move the trouser bar up so that you can hang coat hangers on it. Instead of a tie rod and handles, a shelf can be installed, and a shoe shelf is mounted below. Drawings of such a hanger are shown in Fig.:

Wooden drawings floor hanger

With the indicated other dimensions, the structural and overall width (dimensions 430 and 460 respectively) can be increased by 1-1.4 m without compromising strength and stability, i.e. the hanger will be already a family width up to more than 1.8 m.

About hooks and trempels

Bags, umbrellas, scarves are also left on the hanger, and a bachelor can also have a skirt with lingerie there. Sometimes life is life. It is also more convenient to hang clothes on hooks for a short time. Therefore, in frame hangers, sometimes runner hooks are put on the main bar (the former trouser bar in Fig; height 1360). They or hangers, depending on the need, are shifted to the side in a crowd. But the hook-runners under the fingers turn out at the most inopportune moment. In a hanger of this design and similar ones, the problem is solved simply: the main bar is for hangers, and fixed hooks are attached to the top board.

Pipes and profiles

Original hangers are obtained from round or shaped metal or plastic pipes, see fig. However, despite all the design tricks, their organic vices do not go anywhere. The same as the orderly hung. But high labor intensity is added: in order to hide connecting nodes, you have to strain both your arms and your head.

Pipe hangers

It is better to make a square base of a floor lamp hanger from pipes. With the same withdrawn floor area, the distance between the support points increases by 1.4 times. If the base is still heavier, then the hanger up to 1.7 m high turns into a full-fledged hanger. 60 mm sewer pipes are most suitable.

A short master class in pictures on making the base of a floor hanger from pipes is shown on the next. rice. Pipe sections - 150-300 mm each, depending on how much floor can be given to the hanger. In addition to them, you will need 3 straight tees, 4 right angles and 4 plugs. Connections - on glue for propylene or PVC, depending on the pipe material. Weighting - sand or small gravel.

Making the base of the hanger from pipes

One of the comments to original design begins with a question like this: “Why couldn’t you just solder?”. Judging by the fact that later in the same comment, 90 angles with a clear claim to professionalism are called bends (plumbing bends are oblique tees), another 2-3 and the same number of exclamation points suggest themselves to the question mark.

Nevertheless, the author of the product, albeit not knowing plumbing terminology, solved the problem in a completely engineering way. The hanger does not need tight joints, and a tube of glue will cost much cheaper than renting a soldering iron for propylene. Which, moreover, you need to learn how to use, spoiling a fraction of the material. For greater reliability, you can reinforce the connections with phosphated (black) self-tapping screws: on black, their heads are not visible, and the strength of the hanger will not decrease.

Note: the pommel in the original design is also made of pipes, but, frankly, its design is not the same ... It would be better to drill inclined holes in the rack and insert some strong pins into them using the same glue; wooden, metal.

simple frame

Scheme of a simple floor-wall pipe hanger

A frame hanger made of pipes can be without legs, just leaning against the wall with an inclination. However, its slope must be negative. There must be at least 350 mm between the wall and the clothes on the hangers. If the slope of the frame is positive (the upper crossbar is adjacent to the wall), then the lower one will "leave" from the plinth by 500-600 mm. In a small hallway, this is a serious inconvenience. In addition, they will either cling to the lower crossbar with their feet and it will beat the floor, or it will have to be attached to the floor, and this is really bad: any violation of the flooring is fraught with complex and expensive emergency repairs. Have you seen furniture for sale that needs to be screwed to the floor? Except that special purpose, eg. rack. And then, they also try to get by with fastenings to the walls and, in extreme cases, to the ceiling.

A diagram of a frame hanger with a negative slope of pipes is shown in fig. The materials are the same: line segments sewer pipes 60 mm, 90 angles and straight tees. Withdrawn usable floor area - zero. At the bottom there can be a shoe rack or a banquette. For fastening to the wall, in order not to drill a lot and do without expensive collet anchors, it is better to take a couple more tees: with their help, the holding beams - extensions are attached to the wall with a pair of self-tapping screws in dowels each.

wall

Simple hangers-panels do not require special analysis. How to make a wooden wall hanger, see for example. video.

Video: do-it-yourself wall hanger made of wood

Here we recall, firstly, the sconce hanger. Foldable, it can be very useful if a large company has gathered or the kids have returned from the yard at least squeeze it.

An example of such a structure is shown on the right in Fig. However, its creators were clearly guided by the principle: “Consumption is the basis of turnover Money". The outer (folded) side of the flap bar is inactive and a locking mechanism is needed. And a separate hanger for every day.

Compact folding wall hanger

Meanwhile, folding wall hangers have been known since ancient egypt. In the local climate, outerwear was worn occasionally, in bad weather, but after wearing it, it was necessary to dry it. There was no point in keeping a separate hanger for this in the regions where it rains and cold once a year, not every year, so they came up with the one on the right in Fig.

When folded, the compact wall hanger of the Egyptians was fixed with a cypress stick. Now, of course, you can put a ball retainer or just a hook. The main thing is that the hook hooks should be in 3/4 of the circle, then nothing will fall off them even with the bar folded back. And without need, the whole hanger looks like just a stick on the wall; you can hang bags, umbrellas, keys on hooks.

More about hooks

The original wooden hanger can be made without metal at all, not counting the fasteners. Do not rush to throw away the New Year's pine or Christmas tree (only the blanks will need to be turned upside down):

Video: original do-it-yourself wooden hanger

Best of all, such a hanger will look in the country, in a bar or frame house. Depending on the interior design - and in a city apartment. She will go to the bathhouse perfectly: the touch of steamed skin on metal is unpleasant, and to some extent even traumatic.

Hangers in the nursery

Probably, all children scatter wearable things. There is no need to especially scold them for this: without knowing chaos within reasonable limits, you will not accustom yourself to order. Who is against - answer Friday's question to Robinson Crusoe: "Why doesn't God kill the devil?"

However, teaching children to handle things properly is necessary. Only a children's hanger, so as not to cause obvious psychological rejection, should look somewhat disordered. It is also highly desirable that the child associates it with a favorite game or hobby. Examples of wall hangers in the nursery of the "game / hobby" type are given in pos. 1 and 2 fig.

Baby hangers

A universal method of this kind is a tree hanger, pos. 3. In the contour of a tree, as in any fractal structure, order and chaos interact and complement each other, creating a harmonious whole. Do not forget to just make the tree stronger, for example. from plywood from 12 mm, and, as it should, with a step of no more than 250-300 mm, attach to the wall with self-tapping screws from 6 mm in propylene dowels. A tree, after all, to climb on it.

Floor hangers in the nursery are undesirable for the same reason: well, they will climb anyway and crash. Therefore, if you already want a floor hanger in the nursery, you need to make one that you can’t fit on, which can be seen in pos. 4 and 5.

About cutting plywood

In any case, parents face problems that small ones don’t care about yet: material consumption and labor intensity. Draw a complex contour on a grid on whole sheet plywood is no longer easy, then it needs to be accurately cut, which is even more difficult. And in the end it turns out that 60% or 80% of the material went to waste, no longer suitable for anything. It is necessary, on the contrary, to make a children's tree hanger from waste. Or cut a denser whole sheet.

Assembling parts of a plywood hanger-tree

The method for this has long been known: element-by-element cutting and assembly. If the tree is plywood, for the full strength of the finished product, each part is recruited from 2 layers, leaving resp. folds and grooves, see fig. Fragments of blanks are assembled on PVA glue, wood glue or Express (liquid nails). If the assembly is on PVA, the fragments must be additionally fastened with small nails with a snake in increments of 100-150 mm with an indent from the edges of 30-40 mm.

They assemble a tree hanger on the same adhesives, but now each connection must be fastened with self-tapping wood screws with an envelope. Then the gaps and fastener heads (they must be drowned during assembly) are rubbed with putty from sawdust of the same plywood on PVA. Such a tree, even without painting, only under varnish, will look solid.

Note: just in case, we recall - all wooden details before assembly, any wooden hanger must be sanded with fine sandpaper and treated with a water-polymer emulsion or PVA diluted with water three to five times. After impregnation before further work make a technological break until the part is completely dry (1-3 days, depending on its size).

And one last thing about hooks

In the illustrations above, you most likely noticed curved wooden hooks and other hanger details. It is quite possible to make them at home. In production, dense, small-layer, defect-free wood or waterproof birch plywood (BS grade) is bent heated with steaming or dry, but these methods are too complicated for homework. Only bamboo is more or less simply steamed: the workpiece is boiled for half an hour or an hour in rapidly boiling water, after which it is bent by hand. In case of bending according to the template, the workpiece must be fastened to it quickly, before it has cooled down, with a wide cotton braid or a strip of natural tarpaulin.

Wood rasp

At home, it is easier to cut blanks of the required configuration from a sheet of plywood (any) or MDF of the desired thickness, or, twice or four times more in number, from thin sheet material to dial then how much is required in thickness. Cut with a finishing allowance of approx. 1 mm. The cut blanks are tightly pulled together in a package in a carpenter's vice or in a locksmith's through gaskets made of thick plywood and processed with a rasp on wood to size, and then with a clean sandpaper. One rasp is enough, with flat and semicircular working surfaces, see fig.

The workpieces are assembled into parts in the manner described above. The end surfaces, if you need to hide the layered structure of plywood, are sealed with strips of self-adhesive film under the tree. After that, the part is varnished twice or thrice with acrylic varnish on water based; nitrolac can ruin the self-adhesive. Edge (edge) plastic furniture edge not worth it: you need to accurately select the groove for the edge anchor, which requires a milling machine, but on curved surfaces of large curvature and small length, the edge still does not hold well. And the details pasted over with self-adhesive, under varnish, from solid wood, even the master cabinetmaker will not immediately distinguish.

(Visited 21 674 times, 1 visits today)

Coming home, the first thing we do is take off our outerwear and hang it in a closet or on a hanger. The latter option has some significant advantages: it takes up little space, provides quick access to things, is easy to install, and is suitable for corridors. various forms and sizes.

Due to the simplicity of the design, it is not at all difficult to build a hanger in the hallway with your own hands.

Advantages of self-production:

H low cost of the product;
AT opportunity to achieve the best combination with interior;
And individuality of the hanger: your friends and acquaintances will not have this;
R academic work is highly valued.

Original wall hangers in the hallway are an important and integral element of the interior.

Before proceeding with the manufacture, you need to analyze the shape of the corridor. If it is elongated enough, it is better to give preference to a long hanger with compact shelves or no shelves at all. For large rooms, you can choose any model.

It is also worth considering the features of the interior: style, details, prevailing colors.

The simplest type of hanger is a wooden board with hooks attached to the wall. It is allowed to have a shelf for hats, sides located above or below it. The basis of the design can be taken as a homogeneous large wooden board, or several smaller ones fastened together.

AT traditional version execution the wall hanger represents a level on which hooks and pins are located.

If you wish to show your creative potential, you can make a custom model. For example, an excellent hanger for a nursery will turn out if you create a blank in the form of a cloud, tree or twig. For the corridor, it would be better to cut out something else: horns, a fence or an inscription.

Wall hangers in the hallway and coat hooks are selected according to the style of the interior of the room.

Materials and tools

Now, in almost every hardware store, the buyer is provided with such a rich assortment that it will not be difficult to purchase everything necessary for a wooden hanger to be created with your own hands in the shortest possible time.

DIY wall hanger in the hallway - simple work happy with the result.

To do this, you should buy or prepare the appropriate tools:

jigsaw
Hacksaw;
Blowtorch;
Sandpaper;
Screwdriver or hammer;
Awl;
Pencil;
Roulette.

Tools to help you get the job done.

From the materials you will need:

A piece of wooden board;
screws;
Hooks.

Materials for the future hanger.

For decoration:

Primer;
Paint brush or roller;
Lacquer or other coating;
Blanks for decoupage, scissors, glue, textured sponge.

Materials for decorating hangers.

hanger manufacturing process

A classic do-it-yourself hanger for the hallway does not require significant effort. Production takes a minimum of time. Initially, it is necessary to think over the design in detail, it is recommended to make a drawing on graph paper and calculate the consumption of materials.

You need to transfer the drawing with a pencil or marker.

Then you should get a wooden sheet (or board) and put it on stable supports so that a few centimeters remain between it and the surface of the floor or table. Armed with a jigsaw, cut out blanks of the required shape, observing the contour. If you want to make the edges embossed, you need to go through them with the same tool.

It is necessary to process the roughness, sand the cut points and sand.

The next step - giving the desired appearance. For firing the boards, you will need a blowtorch, which is successfully replaced by a gas burner. At this stage, care must be taken not to injure the fingers, and not to spoil the material. Then you need to get paint or varnish and cover all the sawn parts.

After drying, the assembly of the product is carried out using screws.

The hinged method involves mounting small rounded metal strips, called "ears". Holes are drilled in them for fastening in dowels with screws. The reliability is determined by their length.

A DIY wall hanger can be fixed in several ways.

Another, no less popular way is to do through holes. After their creation and processing, screws or nails with a long leg are skipped and the hanger is attached to the wall.

For fastening, as a rule, screws or small nails are used.

To complete the work you need to attach metal hangers. You can arrange them randomly, in one or more rows.

It can be fixed with the following devices:

"Suckers";
adhesive strip;
Magnets.

Such methods do not cause difficulties and take little time. In this case, the fastening is not very reliable and is suitable only for hats.

Any brave design options favorably emphasize the relevance and originality of the interior.

Making hangers from longitudinal and transverse boards

This design resembles a lattice, it involves the manufacture of a base attached to the wall from horizontally and vertically arranged elongated boards. In this case, it is conditionally possible to distinguish two layers: the first- transverse, second- with longitudinal.

Drawing of a wall hanger with dimensions.

To create a wall hanger with your own hands, you will need to stock up on several long boards. It is better to give preference to lumber with a width of 10-20 cm and a length of 1 m. Having decided on the size, you should get the required number of blanks.

How to assemble the hanger.

After that, it is necessary to process them so that there are no bulges, chips and roughness, giving Special attention edges. Then it is necessary to decompose first the first layer, observing parallelism and the same distance between the planks. If everything suits you, it's time to move on to the second level. Armed with a screwdriver (or, in its absence, a hammer), fix their position at the intersection.

A simple hanger option for self-production.

Hooks need to be attached to the top boards. If they have a vertical position, then it is better to place the hooks in the upper part in one row. for hanger, outer side which is formed by vertical boards, you can create several levels by attaching hooks to each of them.

Hanger dimensions with shelf.

decoration

You can complete the production by giving the product the original appearance. The most interesting surface will be if:

Before proceeding with the coating, the wood should be cleaned of traces of dust, dirt and grease.

DIY materials for decoupage hangers.

We need to prime our wooden hanger with white acrylic paint.

Glizale is a transparent paint that, with some effort, forms a textured surface. Before starting work, you should dilute the glizal with water, according to the instructions. Then the mixture is applied to the prepared workpiece and a pattern is created using a textured sponge. It is necessary to act quickly, otherwise the coating will harden in half an hour. For artificial aging of wood, a type of varnish such as craquelure is used.

It is applied to a pre-painted surface, which as a result is covered with small cracks.

Decoupage allows you to create wooden crafts suitable for any interior. Most often they resort to it when they want to get furniture with the effect of antiquity and complex patterns. To decorate such a hanger, you will have to arm yourself with scissors and blanks with a pattern.

Having cut out paper patterns, it is better to lay them on the surface, evaluate how they will look.

If everything suits- smear the wrong side with glue, attach to the tree and level it so that bubbles do not subsequently form, then cover with furniture varnish and leave to dry completely.

Which finish to choose is up to you. After the varnish has dried, screw the handles into place.

If you have artistic skills, you can draw a picture acrylic paints. Initially, the background and large elements are created, then the details are drawn. To finish work better application varnish and craquelure.

VIDEO: Stylish hangers in the hallway.

Hangers for outerwear are needed in any corridor of both houses and apartments. They are an essential attribute of practicality and design. And this is especially true for narrow corridors, where there is very little space to install a full-fledged locker.

Figure 1. For the construction of a wall hanger, use laminated chipboard 16 mm thick.

Today, designers offer a lot of options for wall hangers - from the cheapest to the most expensive designs. But it will be much more profitable and more pleasant to build such a simple hanger with your own hands. Moreover, it is not as difficult as you might think at first. How to make a hanger yourself? Consider a few good options hangers for corridors.

Standard wall hanger

Material and tools

To begin with, we will describe in detail how to build a modern wooden hanger, on which you can hang not only coats, but also put hats and scarves. As a result, the wall structure will look something like this (Figure 1). Before work, immediately stock up on such tools and materials:

Laminated chipboard. You will need two 25cm x 80cm pieces for the side slats. You can make them straight, not curly, as shown in the figure.
2 back planks 125 x 12 cm.
4 identical strips measuring 18 by 80 cm for the main vertical inner walls.
Shelf for hats measuring about 135 by 25-30 cm.
Hammer.
Building level and plumb.
PVC edging for chipboard edges.
Electric jigsaw or grinder.
Ruler and pencil (chalk) for marking.
Iron.
Joiner's glue.
Metal shears or a construction knife.
Soft cloth.
Sandpaper.
6 large and 2 small metal hooks (as pictured).
Self-tapping screws.
Screwdriver or perforator.
Dowel.

When choosing the base material (chipboard), it is preferable to choose sheets with a thickness of at least 15 mm. At the same time, the texture and color are selected in the corridor independently. Please note that slats can be ordered required sizes, or you can cut them out yourself with a jigsaw, then sand and paste over with tape, which is planted on glue and pressed with a hot iron.

Do-it-yourself finishing will take more time, but you will spend less money on it. Planks to order will be expensive, but at the same time specialists will be able to make them very quickly and efficiently. But the clothes will never catch on small errors on the wood.

Assembly and fastening

When the preparation of the main parts is completed, you can safely proceed to the assembly and fastening of the hanger. First, markings are made on the wall. It is advisable to hang already finished structure on 4 self-tapping screws: 2 on top and 2 on the bottom along the edges. So it will be much more reliable to hold on. When marking, be sure to use a tape measure and a pencil and check everything several times so as not to spoil anything.

After that, start assembling the structure. First connect the front vertical strips to the rear horizontal strips. It is very important to measure everything correctly, so that the distance between the vertical bars is the same. And only then everything can be mounted on self-tapping screws from the back.

After that, it is nailed on top with cloves or on the same screws, a shelf for hats is mounted. During operation, check everything with a level so that there are no errors. Otherwise, the hanger will be crooked. Metal hooks are attached depending on what kind they are.

Next, you just have to fix the hanger on the wall. To do this, you can use self-tapping screws or use hooks. In any case, dowels are first driven into the intended places, and then fastening is already carried out. After you hang the structure, once again make sure that it is reliable and even, after which you can safely operate the hanger.

Non-standard hangers

And now let's take a quick look at some of the simplest, cheapest options for hangers. Of course, the hangers will not be so big and beautiful, but in terms of their functionality they are quite good. Yes, and they look very interesting, as they are non-standard.

Hangers made of metal appliances

Figure 2. Both aluminum and steel forks can be used.

Clothes hanger from ordinary spoons or table forks. To do this, you only need the right amount of forks, dowels, nails and one wooden plank on which the forks will be attached, since they will not look so beautiful on the wall.

The handles of the forks must be bent so that they become hooks. And at the same time, the cloves themselves can be left the same or also bent a little to the side according to the principle of a fan to give them decorative effect. Holes for nails are made under the teeth themselves.

Then markings are made on the wall, on which a wooden canvas is attached. And already on the canvas itself, places for fork-hooks are marked, where they are then attached. Fastening takes place on ordinary nails. Eventually ready-made version hangers will look something like this (Figure 2).

By the same principle, you can use, for example, not forks, but wrenches as hangers. It will be a kind of decoration. But for certain styles, it will be quite appropriate. Just bend like this wrench will be much heavier (Figure 3).

Natural constructions from knots

Figure 3. To make the wrench bend more easily, it must be preheated.

Another practically cost-free and original option for outerwear hangers are ordinary wooden knots (Figure 4). To do this, you first need to pick up the most unusual beautiful knots in the right amount and then prepare them carefully.

First you need to clean them well from the lagging bark and dry them (only in the shade, and not in direct sunlight). This usually takes about a week or two. Then you need to soak them with a special primer from wood decay with a light antiseptic, you can still use drying oil. And after complete absorption of the liquid, you need to cover the knots with varnish.

If you want such a natural hanger to shine, then you need to apply several layers of varnish, it will take more time to dry, but in the end you will get a glossy finish. One or two coats give a slight sheen or dullness to the wood, but the wood remains just as protected.

It is also not recommended to attach such hooks directly to the wall so that the wallpaper does not deteriorate. It is best to use a chipboard panel right size, which must be hung on the wall, and already on the panel with nails to attach the knots. Such a clothes hanger looks good in the corridor if the walls are made of cork, or natural elements are depicted on the wallpaper. A combination with plain wallpaper is also acceptable.

Figure 4. Twigs and knots can be painted in any color or simply varnished.

by the most simple solution is the use of an ordinary shield made of wood and purchased hooks, which can even be placed randomly. In such a hanger for outerwear, you will not see much originality, but you will make it completely without problems - quickly and cheaply.

The size of the shield is selected, which is then cut out of wood. Edges are processed sandpaper, after which they are finished with a special edge or carefully covered with several layers of paint or varnish. In the same case, if you chose the shield from untreated wood, it must also be carefully sanded, then brushed off the dust and varnished or painted.

If you are not satisfied with the color of the shield, you can repaint it. The author's decoration with bronze or silver paint, which gives the effect of antiquity and at the same time makes the hanger richer, also looks great. And you can apply simple drawings in different colors. After drying, the surface is covered with a layer of varnish.

Next, mark with a pencil the places of approximate hook fastenings and nail them. After that, you just have to attach the canvas to the wall with dowels and nails. As you already understood, even such a simple clothes hanger can be original.

So, how to make a hanger in the corridor for outerwear is now clear.

We can conclude from all this that for any budget and corridor space, there are no particular problems to pick up a hanger. After all, materials can be not only expensive, but also practically free.

Now sold in stores various designs wall hangers. But they all have their standard sizes. But you can adjust the homemade canvas yourself. In addition, a do-it-yourself hanger of this type can be attached not only to the wall, but also to the surface of the cabinet, which will help save space.

Ideas for making clothes hangers with your own hands: photos and drawings of hangers for the hallway. Varied Options making homemade clothes hangers.

You can make a clothes hanger with your own hands practically from improvised materials that are lying around at home idle. craftsmen do not cease to amaze with their ingenuity, here is a clear example of a home-made clothes hanger from ordinary forks.

A similar version of a hanger made of metal spoons.

Pallet clothes hanger.

Here is a clothes hanger from a pallet, and again the old pallet was used. A wooden pallet is sawn into two parts from each half of the pallet, you can make a hanger, just paint the workpiece and attach hooks to the boards with screws.

Another option for a pallet hanger, here a whole wooden pallet, it is sanded with sandpaper, the boards are painted in different colors and attach hooks.

Wooden clothes hanger.

Such a hanger is more suitable for a summer house or a bathhouse; wooden knots fixed in a wooden structure are used as hooks here.

Hanger made of metal profile and bars.

The design consists of several bars and metal profiles fastened together.

Wooden hanger with your own hands.

A wide board with imitation of a piece is used here. old wood, coat hooks are made of bars and fixed with screws screwed in with reverse side boards.

Wood is fired blowtorch, which achieves the original texture of the product, the final stage is the coating of the hanger with a transparent varnish.

In this version, there was no carving work.

And in this design, instead of hooks for clothes, doorknobs which can also be painted.

An interesting option for hangers from boards.

Original homemade hanger in the form of a tree.

For manufacturing, thick plywood is used, the contour of the tree pattern is drawn and sawn out electric jigsaw. The design is painted and attached to the wall with dowels.

Hangers for children's clothes.

The details of the hanger are cut out of plywood with a jigsaw and painted with bright colors, so you can make a hanger in the form of animal figures.

Do-it-yourself outdoor clothes hanger.

The simplest version of a floor clothes hanger made of pipes, for manufacturing you will need a thin aluminum pipe 2–2.5 m long. The pipe must be bent, as shown in the figure, and the clothes hanger is ready.

Wall hanger made of pipes.

And this hanger consists of a picture on the wall, clothes hooks are attached with dowels directly to the wall.

There is no way in the hallway without a hanger - you can’t throw your removed raincoats, coats and hats on the floor. You can, of course, drive several large nails into the wall, but this is not at all aesthetically pleasing. Yes, and the wallpaper will be greasy, getting dirty from outerwear. Much more pleasing to the eye and more practical will be the real one - or, as you like. And you can build it yourself, and for this you do not need to be a furniture ace at all.

Tools

We will need skillful hands, simple home tool and minimum materials. You can even use waste, by the way. Or beautiful branches with knots found in the forest.

So, the arsenal of the tool will be as follows:

Screwdriver and self-tapping screws with a diameter of 4 mm with a cap of the appropriate shape. The length of the screws is 3-5 centimeters (depending on the material).
Saw grinder for cutting boards or chipboard.
Dowels (in case of wall construction).
Drill or screwdriver (preferably electric).
Roulette, level, pencil for marking.
Sandpaper for finishing.

To create some variants of hangers, metal corners, a jigsaw (if you need to cut curly surfaces) can also come in handy. If you want to create, then there will be a need for welding machine. However, for simple products, it is not needed.

A simple hanger in the corridor with your own hands

materials

Now about the materials. Most popular - wooden planks, plywood and bars, as well as their trimmings. Hangers are often made from wood boards - it is better to take laminated ones, which look prettier. However, it is possible to paint ordinary chipboards, having previously primed them. It will be effective too.

And if you have an old floor lamp with a stable base that you can’t throw away all your hands, then you can give it a second life in the form of a floor-type hanger. To do this, just remove the lampshade together with the lamp holder and disconnect network wire. It remains to paint the product in the chosen color, not forgetting first to attach hooks to the upper metal circle - woven wire ones are well suited here.

By the way, hooks for hangers in the hallway - important detail. They should be large and comfortable. You can buy them in the store furniture fittings, but you can show imagination. Natural materials are a good help in work. Moreover, the products from them are exclusive - no one will definitely have such products. For example, knots and branches, sanded and varnished, can be used as hooks. Beautiful and functional.

Another interesting and original version- hooks from teaspoons bent in half. Or aluminum forks. In both cases, the handle is the lower (main) part of the product. You can also bend thick wire hooks by shaping them decorative elements- beads, for example.

Wall photo in do-it-yourself hanger in the hallway

From forks From keys From clothespins Old doorknobs
From sticks From spoons From bicycle handlebars From knots

How to make a hanger in the hallway with your own hands

But before you start creating a masterpiece, please look at the drawings that we have selected for you.

Drawings of hangers in the hallway

wall
floor

wall models

The base of the hanger is a shield on which the hooks will be placed. It can be made solid (from a wood board or a centimeter sheet of plywood) or trellised. The latter option is preferable - it is lighter, and less material is used.

To assemble such a shield, two parallel horizontal boards (bars) are attached to the wall with dowels.
Then vertical boards about 7 centimeters wide are nailed to them, and hooks are attached to those.
The size of the product depends on the dimensions of the wall and the entire room. Decoration - optional. It can be varnish, paint, self-adhesive. The main thing is not to forget to carefully process all the edges and ends so that there are no rough edges.
If desired, a shelf for hats can be attached to the top of the hanger with metal corners - a board about 20 centimeters wide.
And if the hanger is made to the entire height of the wall, then it’s a good idea to provide for the bottom. It will have to be supported at the bottom with bars 5 by 5 centimeters.

The following video promises to teach you DIY wall art wooden hangers in the hallway from one board:

floor products

It is important here to take care of a heavy base that should not turn over.

As already mentioned, you can take improvised materials such as the bottom of a floor lamp.
The skeleton of a floor fan that has stopped working is also suitable.
Another tip is to use a Christmas tree stand - there are a lot of them now.
And the easiest and cheapest way is to put together a wooden cross from thick bars, then decorating it.

Now - a hanger post.

It can also be made from a bar with a length of one and a half meters, and in the upper part with metal corners attach several short bars for expansion (our hooks will be located on them).
Much more creative, however, another option will look - if you use a suitable dry tree without bark, sanding it and varnishing it. Here, hooks are not needed - twigs will play this role.

For those who have a welding machine and like to work with metal, you can make a heavy and durable metal hanger. To do this, you need a pipe with a diameter of about 3 centimeters, as well as steel rods for legs and hooks with a diameter of 1.6 and 1 centimeter (respectively). There will be three legs - they are smoothly bent and welded to the pipe. Several hooks are made at the top, as in similar finished goods. And then the design is painted.

Floor hanger, which is easy to create with your own hands

From wood and chipboard

Natural wood is easy to process and finish, and it is also environmentally friendly. In addition, almost every masterful owner will have trimmings of slats, bars, boards or pieces of plywood. A little imagination, a couple of free evenings - and now in front of the admiring household original hanger. All you need is two longitudinal strips, several transverse ones (by the way, it’s good to use ready-made platbands for this purpose) and hooks at your discretion. For example, wooden knots, furniture handles or bright plastic cups.

A very grateful material are wood boards. From them, you can use a jigsaw to cut out all kinds of figured products. For example, a hanger, the contours of which are made in the form of a stylized tree, is now fashionable. Having cut it out, we paint it in a cheerful color (not forgetting to smooth out the irregularities with emery beforehand) and fasten it with dowels to the wall. Then we attach hooks for clothes at the ends of the branches. By the way, for such a tree, you can take thick plywood.

Before moving on to the actual manufacture of the hanger, we advise you to pay attention to the master class in the video below, which will tell you how to create a creative tree-shaped hanger for your corridor:

It is possible to build a simpler version from chipboard hangers in the hallway with their own hands, for example, a solid or lattice shield ( the simplest design wall hanger). And by taking laminated boards, we will get rid of the need to finish them. But the ends must be processed - for this, a special edge is sold, which is welded with an iron. And one more thing: you need to cut laminated sheets only from the inside, otherwise they will crack.

Do you want to create a wooden hanger in the hallway with your own hands? And, preferably, with a shelf for hats? Easy! Watch the following video carefully: