Original hangers for clothes with their own hands. Clothes hanger on wheels: a good solution in interior design Do-it-yourself floor hanger drawings

Clothes hangers are a mandatory attribute in every home, since otherwise it is rather problematic to arrange outerwear. In addition, floor hangers are also useful in the bedroom, so as not to put clothes in the closet every evening and not to use chairs or armchairs. But in the store beautiful furniture is quite expensive, so The best decision This is a DIY outdoor clothes rack. After all, from inexpensive materials, you can make original and beautiful hangers that will greatly decorate and make your interior comfortable.

You can make a clothes hanger from almost any material. But if you are going to do it yourself, the choice of material should be approached carefully.

Wood and plywood are best suited for work, these are the most practical and plastic materials that are easy to work with. If products from them are used in the house, then they are guaranteed not to be exposed to moisture and their service life will increase significantly.

Working with metal or plastic at home is quite difficult, so you should not choose these materials. It is worth considering the fact that sometimes there is a significant load on the hanger, so you need to use materials of appropriate strength so that the furniture does not break.

Examples of floor hangers using metal water pipes

When you buy wood or plywood, pay attention to their quality, because this is a guarantee that the hanger will look beautiful. In most cases wooden crafts covered only with stain or varnish, so the texture remains visible on the surface.

Floor hanger in the form of a tree

Making a floor hanger is easy, and it does not require a lot of tools and materials. This hanger is made from two sheets of plywood, approximately 70x170 cm in size and 18 mm thick. For manufacturing, you only need glue, a jigsaw and sandpaper. The work itself will also not take much time and you will not find such hangers in any furniture store.

First you need to draw on one of the sheets of plywood the outline of the future product. This can be done simply by transferring the drawing to scale on plywood. The most important thing is that the legs are of sufficient width - about 60 centimeters. This is necessary for stability, since if you make them narrow, then the hanger will fall if you hang heavy winter clothes on it.

It is the entrance hall that the guests see first. This is the face of the apartment, which characterizes the owner. For better design this site, you should be aware of the space. A large closet in this case is not appropriate. Therefore, the actual question is how to make a hanger with your own hands.

About all the nuances of this process a little lower.

Characteristic

Accommodation wall hangers for clothing possible in different places, no exception and the hallway. It could be the kitchen or the bathroom. It is important to make this product an unusual addition to the interior. With the right approach, an ordinary hanger will become bright accent made in the style you want.

The product must meet certain requirements. Looks stylish simple, light, but solid construction, with affordable and compact materials.

Mounting is different installation work. As you can see in the photo, hangers are distinguished by wall, ceiling, and mobile products.

Using wall structures, preference in manufacturing is given to corner structures. Designers advise to combine several types. For example, it can be a wall structure in combination with a support, for example, on the floor.

Important! Floor structures in the bathroom and kitchen are not used, as this is inappropriate. After all, hangers take up a lot of space, interfere with the rational placement of other necessary items.

Products differ in the method of hanging. Known designs with hooks, with a bar designed for hangers. The first option will be the way out if you need to rationally place things, saving free space.

The advantage of the second option is quality. After all, you can hang things on a coat hanger without fear that it will wrinkle, lose its attractiveness.

Material selection

The most common option is to make wooden hangers. Forged designs are popular, but they do not always fit into the style composition of your interior.

Often a hanger is made of metal. Most often, hooks are fixed with glue, screws, magnets. You can use suction cups for this purpose.

It is necessary to decide for what purposes the product will be used. If you hang outerwear, then the most the best option the use of self-tapping screws is considered. After all, they will help to withstand a lot of weight.

The rest of the methods are used in the bathroom, or the kitchen. They will easily withstand towels, potholders.

The working process

It is worth considering what ideas there are on how to make a hanger. Let's consider the simplest option, which can be interpreted, combined, added in different ways.

Material should be prepared. Further, for the workflow, a jigsaw is required. Required for mounting additional material, perforator. You also need a level, corner, tape measure. For drawings, prepare a pencil, or a marker.

The simplest manufacturing option is a plank with hooks. You need to take a wooden board.

Note! For quality product board should be chosen carefully. Its surface should be perfectly flat, without cracks, bumps. The material must be well dried. Only after following all these rules, you can start working.

You can notice a wooden plank with a sheet of chipboard, or MDF. It is important to consider the length ratio that will suit your individual needs.

There should be such a distance between the holes that the indentation is approximately 5 cm. building level. Dowels are inserted into their surface. Self-tapping screws are screwed into the base. Hooks must be attached to the bar. Depending on the fastening material, the strength of the entire structure is determined.

Instead of standard hooks, you can use several interesting variations of them. Often used for these purposes are old spanners. First of all, they need to be prepared for work, that is, cleaned, polished. Then they are bent, then screwed to the bar.

Steel forks are often used. They are also ideal for this purpose. Avoid choosing aluminum material as it is brittle in structure. At suitable material teeth can be given a rather interesting shape.

Another option is wooden knots. Moreover, it is not necessary to place them exactly. Often a stave is drawn and the hooks are placed according to the position of the notes.

findings

Fits perfectly with the style of the room homemade product. Hangers are no exception. Such designs are quite easy to make on your own, improve the standard options, supplement them with your wishes and imagination.

Designers advise, are not afraid to experiment, combine different ways to create something of your own. Such a thing will undoubtedly decorate your hallway, characterize you as a creative and talented person.

DIY hanger photo

An invariable element of the interior is a hanger. We come across this object when we enter the room from the street. Today, many varieties of such products are produced. They are built into the closet, hung on the wall, placed on the floor. Clothes hangers easy to move to the right place, floor products can be independent subject interior.

If there was no storage structure outerwear, people would put their coats and jackets on the shelf, having previously folded things. Clothing would take on an unpresentable look, so this element is difficult to overestimate. Interesting design and convenience makes these items popular. Such products are purchased for the hallway, veranda, put in the bedroom and bathroom. As hangers, structures in the form of a tree, letters of the alphabet, interesting figures, etc. are used. Hangers complement the interior, it takes on a finished look.

Advantages

Entering the room, a person immediately takes off his outer clothing. Removed things are hung in a closet, on wall hooks, floor models are used for these purposes. You have access to the right subject wardrobe placed on it. When clothes are placed in the closet, you have to spend time looking for the right thing. You don’t have to look for a coat on a floor hanger, it is in plain sight. The wardrobe takes up more space than the floor structure. Not all hallways have a place to install it, so the floor product becomes the preferred option.

The advantages of such interior items:

Mobility is an important plus, as the hanger is easy to move at any time to another place.
Wall products are attached to the wall, and the coating is damaged. When dismantling, you will have to do surface repairs. This will not happen with the floor version. If you have changed the situation in the room and the hanger is no longer needed, it can be easily removed to the utility room.
Rich the lineup makes it possible to choose an item for any style of interior.
Spaciousness. On the hanger you can place a lot of things in a circle, which is convenient if you have guests.

On such a device, clothes weigh freely, some models are equipped with coat hangers, on which wardrobe items are placed. If your clothes get wet and need to be dried, hang them carefully and move them to a heat source.

materials

Depending on the material of manufacture, hangers are as follows:

The metal construction has an impressive weight and excellent stability. Such products are made of chrome-plated aluminum, painted in different colors. It is roomy, will allow you to place a lot of things, indispensable if you have guests. Simple devices are painted in a variety of colors.
Forged products will become a unique decoration of the veranda or hallway. They are durable, comfortable and practical. Such a product will enliven the interior, bring chic to it.
Wooden models look great in the hallway. They are made from different breeds trees. From this material, strong and durable products are obtained. Wooden structure suitable for classic interior and in a trendy loft. It will complement the interior in country style. This option is suitable for a hallway decorated with natural materials.
Plastic models are light, inexpensive, but with a lot of things on them, they can fall.

Select suitable option for office, home, cafe. There are many original models for solving interior problems on sale. Unique products are created by designers to order, in which case they fit perfectly into the decor of the home.

Variety of models

A huge selection of such items allows you to choose a good option for a specific design. There are many types of floor hangers.

Tripod hanger is a tripod with hooks, they are often equipped with additional hooks for bags, a horizontal hoop for umbrellas. The bottom is made like a tripod or with flat base. This convenient design will solve the problem with a lot of things in the hallway. It is convenient to hang jackets, coats and other things on it.

Model in the form of a chair with high back will allow you to change shoes by sitting on it. It has a shelf for shoes, a strap with hooks for clothes. This convenient option especially if the apartment has old man or small children. There are folding models that can be hung in a closet. This original and functional item will be the highlight of the hallway interior.

Hanger-rack has a U-shape. The crossbar is completed with hooks or is intended for placing clothes on a coat hanger. This product is placed in the dressing room. Your things will not be wrinkled, they will have an impeccable appearance. A good option is a model with a stand for umbrellas, shelves or special holders for hats.

Hanger-basket has a base made in the form of a basket. It stores umbrellas, slippers, and other things. It is indispensable in your home, but takes up more space than the previous version.

suit model Convenient for storing trousers and jackets. It is also suitable for a dressing room. A floor hanger will help keep the suit in tidy condition. It will be a great addition to the office, and your jacket will always be in perfect condition. Such an item is necessary not only for men's suits and ties. Women's things can also be hung on the product: a cardigan, a shawl, a coat.

Non-standard models of hangers

They combine functionality and beauty. Unusual products became fashionable back in the 70s of the last century in Italy. Scandinavian designers once they came up with hangers in the form of trees that look great in the interior. If there is a desire and space, then you can place several of these ornamental trees at the entrance. Today, in the interiors there are hangers in the form of flowers, abstract products, etc. Mobile objects are in fashion. Products on wheels are used in offices, as they are easy to move. But they can be a great addition to your home decor.

Products with a special adjustment system allow you to change the height. The system from a standard hanger will make a convenient design for children. This is especially true when many children are invited to the house for a celebration. Geometric designs in chromed metal, original models in the form of art objects are available to everyone. Having acquired a bright design, focus on it. Owners of spacious apartments and country houses can safely choose a fancy model that will become an original piece of furniture.

Choosing a clothes hanger

It is difficult to do without a hanger, in an apartment, country house, the office needs it. It depends on her appearance hallway. The hanger should be in harmony with the interior and accommodate all the necessary clothes. For an apartment, it is better to stay on a compact outdoor product. Floor hangers often have dubious stability, so when choosing, you need to consider what things it will be used for. There are many interesting items on sale, from which it is easy to choose a high-quality, stable and safe model.

The choice of hanger depends on the design of the room, you can buy a product made of precious wood of different shades or stop at more simple version. Hangers have hooks that are made of wood, metal, plastic. Products with metal hooks are stronger, they will serve properly long time. You should think about where exactly the object will stand.

Advice! It is necessary to take into account the size of the room where the item is planned to be placed, as well as the number of residents in the apartment or house. If one or two people live in a dwelling, then any compact version. In an apartment where a large friendly family lives, they acquire floor version on which the clothes of all households can easily fit.

More massive models are selected in the hallway, and the lightweight version is suitable for the bedroom, bathroom.

Do-it-yourself floor hanger

Build such a piece of furniture from an old floor lamp. To do this, the lampshade and wire are removed, the hooks are attached to the tripod. If on personal plot or a tree grows in the country that has not been bearing fruit for a long time, then use it for a hanger. The plant is cut, the branches are removed. The bark is removed, if left, it will begin to fall off over time, and things will cling to its irregularities. After cleaning the tree, you need to walk on it sandpaper. Then the structure is attached to the base.

The item for storing clothes should not have sharp parts, so as not to damage the floor, things. He must be stable aesthetic appearance, reliability. Stability is provided by the base, which is made in the form of a circle, crosses. The center of gravity is as low as possible. To do this, use heavy bars, metal parts. Installation of the product on three points of support is necessary for the stability of the structure. The bottom of the hanger is upholstered with a material that is softer floor covering. This will prevent leaving marks on the floor. To give the product functionality, hooks are attached to it.

Important! The center of gravity of clothing placed on the product should not go beyond its cross. Otherwise, the product will not be stable and will fall.

The final stage is to give the structure a finished look. Close the lower component of the product with cloth, wood, plastic. The structure is covered with a layer of paint or varnish.

Basic interior items form the style of the room, make it attractive. From the little things one gets the impression of the room and the owner. Interior items are able to emphasize the individuality of the home, tell about the character of the owner.

43 photos of floor clothes hangers:

If several people live in your apartment, then there will definitely be a need to store and place the wardrobe of each of them. And then you can not do without such a device as a rack for clothes. This design will perfectly fit both in a spacious room with a dressing room, and in a small hallway. Such a stand would be very appropriate in a country house.

Benefits of floor stands

The clothes rack is very easy to disassemble and assemble. And most importantly, this does not require special skills.
If you store clothes on a coat hanger, then as a result it will not crumple and will not wrinkle, its appearance will always be impeccable.
The cost of a floor stand is much less compared to a cabinet.

DIY floor rack for clothes

Quite often there are not enough hangers in the hallway and not a lot of things can be placed on them. And sometimes you need to place shoes there. In this case ideal option there will be a floor stand made of metal pipes of small diameter (15-25 mm). You will also need screws, a drill and, if necessary, furniture wheels if you plan to then move the rack to another room.

Step-by-step instruction

The process of creating this design is as simple as possible.

Long pipes (1.4-1.8 m) - 3 pieces will serve as a vertical base.
Shorter pipes (0.8-1.0 m) - 4-5 pieces will be used as the lower horizontal bars. In this case, one of them is fixed in the lower vertical axis. The remaining pipes are screwed close to it, thereby creating the bottom of the rack.
A crossbar of the same length is fixed horizontally from above, fixing the verticals.
Further, perpendicular to it in the same plane, it is necessary to fasten products, 0.4-0.5 m long. In the same way, they are fixed at the ends.
Subsequently, the hanger hooks will be located on this crossbar. At the same time, the lower base, due to its area, will allow you to keep the structure vertically.
So, the floor rack for clothes is ready. If necessary, it can be put on furniture wheels, which should be placed in the corners around the entire perimeter.

Wooden clothes hanger

DIY wooden clothes rack a budget option. And most importantly, you will definitely not find this in the store. On it you can arrange various clothes: bathrobes, dresses, T-shirts, shirts, belts, ties and much more.

Construction detail

It will look like this.

For the lower fastener (floor legs), you will need boards measuring 15 x 30 x 360 mm.
The middle element (uprights) will be made of planks 20 x 30 x 280 mm.
For the upper fastener (shoulders), you will need to take boards measuring 20 x 80 x 460 mm.
For a short rack, we take strips 20 x 50 x 763 mm.
Boards measuring 20 x 50 x 1003 will be required for a long rack.
As a connecting element, it will be necessary to take three types of blanks, 460, 430 and 390 mm long, of the same diameter - 18 mm.
Each structural element must be made from dry planed boards. Sharp edges are rounded with sandpaper.
Then holes of the required diameter are drilled. It is advisable to treat the wood with an antiseptic and then cover it with a decorative composition.
Rack parts are interconnected using chrome-plated wing nuts, threaded studs or enlarged washers.
Racks fastened chrome-plated metal pipes or wooden elements cylindrical shape of the appropriate length. This is done using glue.
Hangers are installed on top. The planes of the connected elements are treated with glue.
Thus, the wooden rack for clothes (photo above) is assembled. Such a stylish detail can decorate the interior of any hallway.

Such hangers can be used not only for outerwear in the hallway, but also as mini-wardrobes in the room. It all depends on which type and design you choose. Clothes rack hangers are functional, easily moved from place to place, and free the backs of chairs from unnecessary clothes there.

This article contains some interesting and simple ways Make your own outdoor clothes hanger. They don't take much time or effort.

Choose your favorite option and go ahead to change the interior!

Necessary materials:

Two copper pipes long 3 m and 2 cm thick, each of them will need to be cut into such parts (this can be done at a hardware store where you will buy everything):

1.5 m long- the height of the hanger (this height should be enough for both jackets and coats, but you can take more or less if you wish);
1 m long- the size of the pipe on which you will directly hang things (you can also take it longer or shorter, calculate how many things you want to put there);
two tubes about 20-25 cm long- we will make hanger legs from them.

That is, it turns out 2 copper tubes by 1.5 m, 2 by 1 m, 4 by 20-25 cm.

4 copper elbows (tubes bent at an angle of 90 degrees) for attaching pipes to each other, select according to the diameter for the pipes (approximately 2 cm);
2 T-connectors;
2 caps for pipes;
Glue (epoxy glue or ask the seller in the store which of what is available is suitable);

Step-by-step instruction:

Step 1: Measurements

Measure the space on the floor where the hanger will be, make sure it will fit. If you take the indicated dimensions, you will end up with 150 cm x 100 cm x 45 cm.

TIP: Adjust the dimensions if necessary.

Step 2: Assemble the legs of the hanger

We begin to fold the floor hanger itself from the legs, make a support and a rack. To do this, take the first pair of tubes of 20 cm each and fasten them between a T-connector, and then we do the same with the second pair.

Step 3: Attach the protective caps

To prevent dust and dirt from getting into the middle of the pipes, which will serve as legs, you need to close the holes. On each of the two legs folded in the previous step, attach a pipe cap at one end.

Step 4: Foundation

On tubes with caps on the other side, attach a corner in this way: when the corner is on the floor, the T-connector located in the middle of the leg should be pointing up.
Take one of the meter-long pipes and insert it into the corners, now the base of the hanger is ready.

ATTENTION: To securely fix the structure, you can use glue (at least in all joints), but then the hanger cannot be disassembled and folded again (when moving, for example).

Step 5: Side Racks

Insert a one and a half meter pipe into each of the T-shaped connectors, thus forming the side racks.

Step 6: Finishing touch

Attach a corner to each of the newly installed racks (they should be directed at each other), and insert a meter pipe into them.
You can also attach felt pads to protect the floor. floor hanger ready!

Note: Since this design is easily disassembled (if you did not use glue), you can change its length, for example, depending on the time of year: in winter there are more things - longer pipes were installed, in summer they are shorter.

Hanger made of PVC pipes (budget option)

The method of making this floor hanger is similar to the previous one: the pipes are folded like a designer to form a hanger. But here we do not use copper pipes, and PVC, so it will be much cheaper. And, of course, one more new idea design.

Necessary materials:

PVC pipe with a length of 2 m and a diameter of 2.5 cm, it must be cut into the following parts: 12 cm (6 pieces), 80 cm (1 piece), 20 cm (2 pieces) and 10 cm (1 piece).
PVC pipe 50 cm long and 2 cm in diameter, cut it into 3 pieces of 15 cm.
4 bends-corners with a diameter of 2.5 cm.
3 bends-corner with a diameter of 2 cm.
6 T-connectors with a diameter of 2.5 cm.
Adhesive for PVC.
Aerosol paint.
4 PVC adapter and from 2.5 cm to 1.25 cm.
3 PVC adapters from 2.5 cm to 2 cm.
Felt pads to protect the floor (optional).

Step-by-step instruction:

Step 1: Cut the tubes into desired sizes

First of all, we have to cut PVC pipes for rack mounting. You can do this yourself at home with a PVC cutter or ask at a hardware store.

After cutting the pipes into pieces, their edges can be sanded so as not to be scratched when assembling the hanger.

Step 2: Sort the materials

Now we have all the necessary parts and for convenience it is better to sort them, then the assembly process will be faster and more orderly. Arrange the materials in piles, depending on their purpose.

For the hanger stand you will need: 4 elbows, 4 adapters from 2.5 cm to 1.25 cm, 3 T-pieces and 6 tubes 12 cm long (diameter 2.5 cm).
For each arm hanger: T-connector, PVC adapter from 2.5 cm to 2 cm, 15 cm PVC pipes with a diameter of 2 cm and a corner with a diameter of 2 cm (you can still put a cap for pipes on it).
For rack: one PVC tube 80 cm long, two 20 cm each, one 10 cm and a cap.

Step 3: Assemble the hanger

stand

Fasten each two tubes with a T-piece. Insert one of the three resulting structures between the other two, as shown in the photo. Put the corners on the edges of the other two, turning them down so that a hanger stands on them.

Hands

Put together the T-piece, adapter, tube and cap as shown in the photo.

rack

Insert a tube 80 cm long into the T-connector into the stand, attach one of the arms of the hanger to it, then attach a tube 20 cm long, another arm of the hanger, again the same tube and arm, a tube 10 cm long and finishing touch put a cap on top.

To keep the structure better, it can be fastened with a special glue for PVC. Be careful with the arms of the hanger to stick them turned in the right direction - corners up.

Step 4: Painting

The design of the hanger is ready, but it still does not look very aesthetically pleasing. Carefully and evenly apply the spray paint in the color of your choice, do not stain the room.

TIP: to make the hanger more stable, sand can be poured into the pipes from which the stand is made. After such a little trick, the hanger will not fall and turn over.

Hanger made of pipes with several levels

Another hanger of this type, only with extended functionality: here you can not only hang clothes, but also put shoes. Compact and comfortable wardrobe.

Necessary materials:

PVC tubes with a diameter of 20-25 mm:
- 4 long 100cm
- 2 long 65cm
- 4 long 48cm
- 6 long 20cm
- 8 long 5 cm
10 T-connectors
6 elbows
Plate for bottom shelf

We fold it completely in the same way as the two hangers described above.

Wooden floor hanger in 10 minutes

Necessary materials:

Wooden sticks (4 pieces) 180 cm long and 2 cm in diameter.
Rope: This will be used to tie wooden sticks together (you can also use leather cords, wire, or some other decorative material, the main thing is that it firmly and reliably fixes the structure).
Spray paint: we used golden color to paint lower part hanger legs (you can also use a different shade or color).
Paint: we used four various colors paint, one on each leg of the hanger (but of course you can use the same color for all legs).
Masking tape: When using spray paint, this will help keep the paint off.

Step-by-step instruction:

Step 1: Paint the supports

Paint the legs in the chosen colors, let the paint dry.
Apply painter's tape where you want it to end. spray paint, and carefully apply the paint to the legs. It is better to do this on the street, or cover the floor with newspapers so as not to stain anything. Peel off the masking tape.

Step 2: Shape the Hanger

Connect the wooden supports together with a rope, and then gradually push them apart. You should get something similar to the basis of a wigwam, the legs should be spaced wide enough so that the hanger is stable and easy to use.

Such a hanger takes up a lot of space, so it is best to put it in the corner.

Interesting ideas and photos

Tree hangers

It can be a neatly sanded tree trunk or branch, or a folded wooden structure. The main thing is that there should be one support and branches from it - hanger handles. An original and useful addition to the hallway.

Hangers-constructors

The number of elements and design may vary, but what all these floor hangers have in common is that they can be quickly folded, and just as quickly disassembled (if no glue was used). Sometimes more expensive and noble materials are used, such as copper, sometimes wood or PVC, in any case it turns out beautifully and extraordinary.